Samsung SHD-100C
Contents
1. 2 Remove Mounting Plate by loosening four 4 8 32 screws and washers Lift Mounting Plate slightly to unhook it from Backbox 8 32 x 3 8 Phillips Head Screws x4 and 8 Flat Washer x4 n 14 20 x 1 2 Tamper Resistant Torx Screw x3 and 1 4 Flat Washer x3 Compatible Model List SNV 5084 SNV 5084R SNV 6084 SNV 6084R SNV 7084 SNV 7084R SNV 8080 Made in the USA by Broadsight Systems Inc for Samsung Techwin Hold Backbox up to installation surface and use holes in Backbox as a template Mark hole locations for drilling Set Backbox aside and drill out mounting surface as needed Attach Backbox to mounting surface using appropriate anchors and fasteners Each fastener should have a minimum 200 Ibs pull out strength Run cable into backbox Attach compatible camera to the Mounting Plate using appropriate fasteners Make power video data connections to the camera Reinstall Mounting Plate by slipping Captive Fastener heads over the Notches in the Backbox Secure Mounting Plate by reinstalling 8 32 screws and washer from Step 2 Carefully slide Cover over the dome bubble not shown avoid scratching the dome bubble Align holes in Cover with Tabs in Backbox It may be safest to leave the plastic film on the dome bubble as long as possible Secure Cover by replacing 14 20 Tamper Resistant fasteners and washers from Step 1 Tabs x3 Notches x2 Backbox Mounting Plate2. Cover Page 1of2 Dimensional Drawings Units Inches Made in the USA by Broadsight Systems Inc for Samsung Techwin Page 2 of 2
3. INSTALLATION MANUAL SHD B 100C Heavy Duty Corner Mount Unpacking Unpack carefully This is mechanical equipment and should be handled with care If an item appears to have been damaged in shipment replace it properly in its carton and notify the shipper If any items are missing notify Broadsight Systems Inc The shipping carton is the safest container in which the unit may be transported Save it for possible future use Service If the unit ever needs repair service the customer should contact Broadsight Systems Inc for a return materials authorization RMA and shipping instructions Care and Maintenance Perform routine maintenance to keep the unit dust free Model Designation SHD B 100C Heavy Duty Corner Mount Description The Heavy Duty Corner Mount is designed to mount a camera in the corner of a room that requires maximum protection to the camera The unit is designed to accommodate multiple camera models Hardware Kit SBD B 100C None Tools Required TT 27 Tamperproof Torx Bit or Wrench Cross Recessed Phillips Head Screwdriver Camera Mounting Hardware Backbox Mounting Hardware Appropriate Sized Drill Bits Certification Camera installation should be performed by a licensed professional and conform to the National Electrical Code NEC and any applicable local codes Installation 1 Remove Cover by loosening three 3 Tamper Resistant screws using the designated Torx bit or wrench Set cover aside
Download Pdf Manuals
Related Search