Powerplus POW4110 power sander
Contents
1. s scccssseccnsseccnssencnsssncnssseesesenanecensnsnseses 7 lt 9 9 7 C epe E sen oe Semen a nare es Se eee nen 7 14 WARRANTY oiana a neva sneb ones uastvewueaee T 15 ENVIRONMENT asmana EA 8 16 DECLARATION OF CONFORMITY cccsseeceeseecensesceneesenneesens 8 Copyright 2014 VARO NV Page 1 www varo com POWERPLUS POW4110 EN DESIGNED AND MARKETED BY VARO BELT SANDER 800W POW4110 1 APPLICATION The belt sander is the perfect tool to sand wood and to grind iron plastic or similar materials The belt sander must be used for the rough work for the normal sanding work an orbital sander must be used It is not designed for commercial use before using the appliance for your own safety Your power tool should WARNING Read this manual and general safety instructions carefully only be passed on together with these instructions DESCRIPTION FIG A On off switch Front handle Rear handle Blocking switch Dust collection opening Adjusting knob Sandingbeltfastener Front belt roller Sanding belt 10 Drive belt cover 11 Dust bag 12 Speed adjusting wheel 3 PACKAGE CONTENT LIST Remove all packing materials Remove remaining packaging and transit supports if existing Check the completeness of the packing content Check the appliance the power cord the power plug and all accessories for transportation damages Keep the packaging materials as far as possible till the end of the warranty period2. one on the back Through that you can hold the machine with two hand you have a better control of the machine and there is less risk to becoming in touch with the moving parts Hold the belt sander always with both hands Copyright 2014 VARO NV Page 5 www varo com POWERPLUS POW4110 EN 7 7 Operating instructions Make sure that the machine has reached its full soeed before placing the machine on the work piece This will prevent an overload of the machine For sanding wood place the machine approximately 15 out of the grains of the wood Move the belt sander continuous over the work piece 8 TROUBLESHOOTING In case the belt sander does not work well we give you some ed causes and solutions Problem Cause remedy ss The electromotor gets The cool ventilation slots in the Clean the cool ventilation hot motor are stopped up with dirt slots does not work connection for fracture absorbed stopped up dust extraction opening 9 CLEANING AND MAINTENANCE Attention Before performing any work on the equipment pull the power plug 1 Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine Regularly clean the machine housing with a soft cloth preferably after each use Keep the ventilation slots free from dust and dirt If the dirt does not come off use a soft cloth moistened with soapy water E a a Never use solvents such as petrol alcohol ammonia water etc These solvents m
3. Dispose it into your local waste disposal system afterwards oo Nu Eo NKE NY WARNING Packing materials are no toys Children must not play with plastic bags Danger of suffocation 1 belt sander 1pc dust bag Sanding paper manual When parts are missing or damaged please contact your dealer Copyright 2014 VARO NV Page 2 www varo com POWERPLUS POW4110 EN 4 SYMBOLS In this manual and or on the machine the following symbols are used Class II The machine is double insulated Earthing wire is Always wear safety goggles therefore not necessary Denotes risk of personal injury or Read manual before use damage to the tool In accordance with essential safety standards of applicable Wear gloves European directives 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions Failure to follow all warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool 5 1 Work area Keep work area clean and well lit Cluttered and dark areas invite accidents Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders away while operating
4. POWERPLUS POW4110 EN 1 APPEICA HON ironion E 2 2 DESCRIPTION FIG A ssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn ne 2 3 PACKAGE CONTENT LIST ccceseecceneecceseecnseecensescensesenneesens 2 4 VO S ar a E E 3 5 GENERAL POWER TOOL SAFETY WARNINGG ecceeee 3 5 1 WU OTIC ICE ariran EEEE EEEE EEEE 3 5 2 Electrical Salo tly coiii a R 3 5 3 PPOESON Al SaTOly oseere a EA E eee ee eel 4 5 4 Power tool use and Care acc cca aaa ssa a sce gee eet ee ee 4 5 5 OEIC ANE E A gc nena gen vacua E E E acest eee 4 6 SPECIFIC SAFETY WARNINGG cccccesseeceeseecenseecensesenneeseases 4 T OPERATION cennari E E R 5 7 1 Choice OF INE sand Paper ssns AAE RERA 5 7 2 Removing and installing the sanding Delt scccccceeeeeeeenseeeeeeeeeeeseeeneanesenseeeeeanens 5 7 3 Aligning the sanding Dell EREEREER Ai 5 7 4 SWICRING ON ANG OF esasen O 5 7 5 Mounting QUST Dag s siti E E E EE EEE EEEE 5 7 6 Ea e PAES ENE AN E I EA sade E E E E N AE E N E E E 5 7 7 ODGrallng INSU UCT ONS seassicsieessssiveresecetieessieseediucetevensnczeessbdtieesstdacecdsidebeeeceuseesseesinecis 6 8 TROUBLESHOOTING ccccccceeseecenseecnnsescnseecenseecenseecensesenneesenseees 6 9 CLEANING AND MAINTENANCE 00 cc ceecseeeceneeeceneeecnseesenseeeens 6 9 1 CHANG PEE E E A 6 10 TECHNICAL DA A nsassenssnnunnnnnnnnnnnnnnnannnnnnnnnnnnnnnnnnannnnnnnnnnnnnnnannnnnnnnna 6 11 NOISE naa A 6 12 SERVICE DEPARTMENT
5. a power tool Distractions can cause you to lose control 5 2 Electrical safety Always check that the power supply corresponds to the voltage on the rating plate Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock f operating a power tool in a damp location is unavoidable use a residual current device RCD protected supply Use of an RCD reduces the risk of electric shock Copyright 2014 VARO NV Page 3 www varo com POWERPLUS POW4110 EN 5 3 Personal safety Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are
6. at the safety of the power tool is maintained 6 SPECIFIC SAFETY WARNINGS f you are working with the sanding machine always wear ear protectors and dust mask The sanding machine is not suitable for wet sanding Check if the switch is not in position ON before you connect the mains plug to the mains voltage Keep the mains lead always away from moving parts of the tools Copyright 2014 VARO NV Page 4 www varo com POWERPLUS POW4110 EN Use safety glasses especially when you sand above your head Do not bring pressure to your machine this will only delay the sanding IMMEDIATELY SWITCH OFF THE MACHINE WHEN Excessive sparking of the carbon brushes and a ring of sparks in the collector Interruption of the mains plug mains lead or mains lead damage Defect switch Smoke or stench of scorched isolation 7 OPERATION 7 1 Choice of the sand paper Coarse sandpaper grain 50 removes in general the bigger part of the material and fine sand paper is used for the finishing If the surface is not even then start with rough sandpaper Further you use middle coarse sandpaper grain 80 to remove the scratches left behind by the coarse sand paper and finally you take fine sandpaper grain 120 for the finishing 7 2 Removing and installing the sanding belt AN Before assembly the sanding belt always remove the plug from the mains Put the machine on its side with the drive belt cover 10 Fig A down wards L
7. ay damage the plastic parts 10 TECHNICAL DATA Voltage frequency 230V 50Hz Power input 800 W No load sander paper speed 0 300 m min Sanding belt size 76 x 457 mm Insulation class Double insulated II 11 NOISE Noise emission values measured according to relevant standard K 3 Acoustic pressure level LpA 93 dB A Acoustic power level LwA 104 dB A ATTENTION Wear hearing protection when sound pressure is over 85 dB A aw Vibration Max 3 2 m s K115 ms Copyright 2014 VARO NV Page 6 www varo com POWERPLUS POW4110 EN DESIGNED AND MARKETED BY VAR i SERVICE DEPARTMENT Damaged switches must be replaced by our after sales service department If the connecting cable or mains plug is damaged it must be replaced by a particular connecting cable which is available from our service department Replacement of the connecting cable must only be carried out by our service department see last page or by a qualified person qualified electrician ue STORAGE Thoroughly clean the whole machine and its accessories Store it out of the reach of children in a stable and secure position in a cool and dry place avoid too high and too low temperatures Protect it from exposure to direct sunlight Keep it in the dark if possible Don t keep it in plastic bags to avoid humidity build up 14 WARRANTY This product is warranted as provided by law for a 24 month period effective from the date of purchase by the first use
8. ed standards Any unauthorized modification of the apparatus voids this declaration European Directives including if applicable their amendments up to the date of signature 2011 65 EU 2004 108 EC 2006 42 EC European harmonized standards including if applicable their amendments up to the date of signature EN60745 1 2009 EN60745 2 4 2009 EN55014 1 2006 EN55014 2 1997 EN61000 3 2 2006 EN61000 3 3 2013 Keeper of the Technical Documentation Philippe Vankerkhove VARO Vic Van Rompuy N V The undersigned acts on behalf of the company CEO ie y Philippe Vankerkhove Regulatory Affairs Compliance Manager 29 08 14 Copyright 2014 VARO NV Page 8 www varo com
9. ement of a new warranty period in case of a device replacement Devices or parts which are replaced under the warranty therefore remain the property of Varo NV We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained Clean ventilation slots carbon brushes serviced regularly etc Your purchase receipt must be kept as proof of date of purchase Your appliance must be returned undismantled to your dealer in an acceptably clean state in its original blow moulded case if applicable to the unit accompanied by proof of purchase Copyright 2014 VARO NV Page 7 www varo com POWERPLUS POW4110 EN DESIGNED AND MARKETED BY VARO 15 ENVIRONMENT oo Should your appliance need replacement after extended use do not discard it ST with the household rubbish but dispose of it in an environmentally safe way CN Waste produced by electrical machine items should not be handled like normal O household rubbish Please recycle where recycle facilities exist Check with your E Local Authority or retailer for recycling advice 16 DECLARATION OF CONFORMITY VARO N V Joseph Van Instraat 9 BE2500 Lier BELGIUM declares that Product belt sander trade mark POWERplus model POW4110 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives based on the application of European harmoniz
10. not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the plug from the power source before making any adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users Maintain power tools Check for misalignment or sticking of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to stick and are easier to control Use the power tool accessories and tool bits etc in accordance with these instructions and in the manner intended for the particular type of power tool taking into account the working conditions and the work to be performed Use of the power tool for operations different from intended could lead to a hazardous situation 5 5 Service Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure th
11. oosen the sanding belt fastener 7 Fig A Remove the sanding belt from the machine Put a new sanding belt on the machine make sure that the direction arrows on the sanding belt are pointing in the same direction as the direction indicator Fasten the sanding belt fastener again 7 Fig A 7 3 Aligning the sanding belt If the sanding belt doesn t run parallel with the outer edge of the housing the sanding belt must be aligned Move the sanding belt in the correct position with the adjusting knob 6 Fig A By turning the adjusting knob clockwise the sanding belt will move to the inside and by turning anti clockwise the sanding belt will move to the outside 7 4 Switching on and off To switch the machine on press the on off switch I Fig A To switch the machine off release the on off switch I Fig A It continuous operation is required the blocking switch 4 fig A must be used Switch the machine on to press the on off switch Press the blocking switch 4 Fig A and release the on off switch To switch the machine off press the on off switch again and release the on off switch 7 5 Mounting dust bag Use the dust bag to collect dust which is released during sanding Put the dust bag on the dust collection opening 5 Fig A Empty the dust bag regularly in order to obtain an efficient dust extraction 7 6 Grip The use of the belt sander is made easier because of the two grips one on the front side and
12. r This warranty covers all material or production flaws excluding batteries chargers defective parts subject to normal wear amp tear such as bearings brushes cables and plugs or accessories such as drills drill bits saw blades etc damage or defects resulting from maltreatment accidents or alterations nor the cost of transportation Damage and or defects resulting from inappropriate use also do not fall under the warranty provisions We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool Repairs may only be carried out by an authorised customer service centre for Powerplus tools You can always obtain more information at the number 00 32 3 292 92 90 Any transportation costs shall always be borne by the customer unless agreed otherwise in writing At the same time no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload Definitely excluded from the warranty is damage resulting from fluid permeation excessive dust penetration intentional damage on purpose or by gross carelessness inappropriate usage use for purposes for which the device is not suitable incompetent usage e g not following the instructions given in the manual inexpert assembly lightning strike erroneus net voltage This list is not exhaustive Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commenc
13. tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Use safety equipment Always wear eye protection Safety equipment such as dust mask non skid safety shoes hard hat or hearing protection used whenever conditions require will reduce personal injuries Avoid accidental starting Ensure the switch is in the off position before plugging in Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts f devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used Use of these devices can reduce dust related hazards 5 4 Power tool use and care Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was designed Do
Download Pdf Manuals
Related Search