Sencor SDC 120
Contents
1. 1 Press SET once the hour digits flash Press A or V to set the current hour hold to advance rapidly 2 Press SET again the minute digits flash Press A or W to set minutes hold to advance rapidly 3 Press SET again the display shows 05 and flashes Press A or V to select your snooze time from 5 to 60 minutes 4 Press SET again or if no key is pressed in approx 10 seconds to exit the setting mode EN 2 SETTING THE ALARMS 1 Press AL 1 2 once the A1 LED and the hour digits flash Press A or to set the alarm 1 hour hold to advance rapidly 2 Press AL 1 2 again to adjust minutes Press A or V to set the alarm 1 minutes hold to advance rapidly 3 Press AL 1 2 again LED displays OFF alarm off To turn on the alarm press A or Y to select ON 4 Press AL 1 2 again LED displays HI To select lower buzzer sound level press A or V to select LO 5 Press AL 1 2 again the A2 LED and the hour digits flash Press A or V to set the alarm 2 hour Repeat step 2 and 4 to set alarm 2 6 Press AL1 2 again or if no key is pressed in approx 10 seconds to exit alarm setting mode When the related alarm is turned on it will be indicated by the appearance of the A1 and or the A2 LED on the right side of the display STOP AND RESET THE ALARM TO COME ON THE NEXT DAY When alarm 1 or 2 is sounding the related A1 or A2 LED flashes Press the AL 1 2 once to stop the alarm and reset it to come2. SENCOR SCD 120 LED CLOCK WITH A DOUBLE ALARM USER S MANUAL AND CURVED DISPLAY EN FUNCTION AND CONTROLS DOWN SET SNOOZE DIMMER ALARM1 ALARM2 UP TIME ALARM1 DC SOCKET BATTERY DOOR INSERT 1 x CR2032 ACIDE ADAPTOR BATTERY INSIDE THE BATTERY COMPARTMENT INSERT AC DC ADAPTOR JACK EN 1 INSTALLATION Plug the AC DC adaptor to an AC household outlet and then plug the DC jack to the back of the unit Your clock is ready to work for you BACKUP BATTERY INSTALLATION Your clock requires one CR2032 lithium battery not included to provide backup power to the clock in the event of a temporary power interruption 1 Place your unit face down on a flat surface 2 Slide and remove the battery cover at the bottom of your unit 3 Insert one new CR2032 lithium battery into the battery compartment with the side facing up as indicated 4 Replace the battery cover If AC power is interrupted the LED display will go off and the alarm will not function The backup battery will keep the time and all settings of your unit Make sure a fresh CR2032 lithium battery is used A fresh CR2032 battery could backup your clock continuously for around 3 days SETTING TIME AND THE SNOOZE DURATION
3. d in contrary to the applicable instruction ess of use or used for another purpose which has ot the serial Authorized service centers Visit www sencor eu for detailed information bout authorized service EN 7
4. e cleaning 4 Ifthe unit is not to be used for a prolonged period such as a month or longer remove the batteries to prevent possible corrosion Should the battery compartment become corroded or dirty clean the compartment thoroughly and replace the batteries EN 4 SPECIFICATIONS Alarm duration Snooze duration Time format Default settings Time Alarm 1 and 2 Snooze duration Power supply Power consumption Dimensions Weight 2 minutes 5 to 60 minutes 24 hr 0 00 6 00 05 5 minutes power adapter DC 5V 300 mA included backup battery 1 x 3v type CR 2032 not included with this product 1W 171 x 87 x 40 mm 140g EN 5 INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of used packaging material at a site designated for waste in your municipality DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste For proper disposal renewal and recycling hand over these products to determined collection points Or as an alternative in some European Union states or other European countries you may return your products to the local retailer when buying an equivalent new product Correct disposal of this product helps save valuable natural resources and prevents damage to the environment caused by improper waste disposal Ask you
5. on the following day After that A1 or A2 icon stays on the display SNOOZE OPERATION default snooze duration is 5 minutes When alarm is sounding press Zz Q once the alarm will be silenced and come on again after the set snooze duration Note If your second alarm activates while the first alarm is sounding or it is in the snooze mode the second alarm overrides the first alarm the first alarm is reset to come on the next day EN 3 USING THE HI LO OFF DIMMER Press Zz X to adjust the brightness HI LO OFF of the LED display This can only be done when the unit is not sounding or snooze functioning TROUBLE SHOOTING If your clock displays irrelevant time or does not function properly which maybe caused by electro static discharge or other interference unplug the DC jack to disconnect the AC power and remove the backup battery The clock will be reset to default settings and you need to set it again CARE OF YOUR PRODUCT 1 Place your clock on a stable surface away from sources of direct sunlight or excessive heat or moisture 2 Protect your furniture when placing your units on a natural wood and lacquered finish by using a cloth or protective material between it and the furniture 3 Clean your unit with a soft cloth moistened only with mild soap and water Stronger agents such as Benzene thinner or similar materials can damage the surface of the unit Make sure the unit is unplugged befor
6. r local authorities or collection facility for more details In accordance with national regulations penalties may be imposed for the incorrect disposal of this type of waste For business entities in European Union states If you want to dispose of electric or electronic appliances ask your retailer or supplier for the necessary information Disposal in other countries outside the European Union This symbol is valid in the European Union If you wish to dispose of this product request the necessary information about the correct disposal method from the local council or from your retailer This product meets all the basic requirements of EU directives that apply to it Changes in the text design and technical specifications may change without prior notice and we reserve the right to make these changes EN 6 SENCOR EN Warranty conditions Warranty card is not a pert of the device packaging This product is warranted for the period of 24 months from the date of purchase to the end user Warrenty is limited to the following conditions Warrenty is referred only to the customer goods using for common domestic use The claim for service can be applied either at dealer s shop where the product w of at below mentioned authorized service shops The end user is obligated to set up a claim immediately when the defects appeared but onl of warranty period The end user is 0 to cooperate to certify the claiming defects Onl
7. y compl clean according to hygienic standards product will be accepted In case of eligible warranty claim the warranty period will be prolonged by the period from the dete of claim application till the date of taking over the product by end user or he date the end user is obligated to take it over To obtain the service under this warranty end user is obligated to certify his claim with duly completed following documents receipt certificate of wa tificate of installation till the end This warranty is void especially if apply as follows Defects which w Wear out or damage caused by com m The product was damaged by unprofessional or wrong inst nanual used ntrary to legal enactment and common been designed for m The product was damaged by uncarec for or t was damaged by dirt accident of force m unctionality caused by low duality of signal The product was mechanically damaged e g broken but Damage caused by use of unsuitable media filings expendable supplies batteries or by unsultahle working conditions e g high temperatures humidity quakes m Repair modification or other failure action to the product by unauthorized person End user did enough his right to claim time and place of purcha m Data on presen cuments differs from data on products Cases when the claiming product cannot be indentified according to the presented documents e g number or the warranty seal has maged ion use
Download Pdf Manuals
Related Search