Home

Samsung ATIV NP270E5J

1. lt Wake On LANG is a function that activates the system from Sleep mode when a signal such as a ping or magic packet command arrives over the network wired LAN 1 Click Charms menu on the Desktop gt Settings 1X gt Control Panel gt Network and Internet gt Network and Sharing Center and click on Change adapter settings in the left menu pane Right click on the Wired Ethernet Connection and select Properties Click Configure gt Power Management tab Select Allow this device to wake the computer then click OK Restart the system If the system wakes up from Sleep mode even though there is No received signal use the system after disabling the lt Wake On LAN gt function The LAN LED may not be turned off if System is shoutdown without disabling the WOL Wake on LAN option Connecting a wired LAN while using a wireless LAN may not activate the lt Wake On LAN gt function Set the Wireless LAN to Disable to use the lt Wake On LAN gt function Chapter 3 Using the computer lt Wake On LAN gt feature may not work while using Hybrid power saving feature Hybrid sleep mode can be disabled from Power Options under Control Panel Z Wake On LAN activated by Ping is not supported q When connected to a 100Mbps 1Gbps wired LAN and the computer exits Sleep hibernation mode a message appears informing you of a connection to a 10OMbps 100Mbps wired LAN This happens because when the com
2. Close the LCD panel only after checking if the notebook computer is turned off The temperature may rise and cause overheating and deformation of the product Do not press the Eject Button while the CD ROM drive is in operation You might lose data and the disk might be suddenly ejected and could cause an injury Do not drop or knock the product This may result in injury or damage to the data Do not touch the antenna with an electricity facility such as the power outlet There is a danger of electric shock When handling computer parts follow the instructions on the manual supplied with the parts Failure to do so may cause damage to the product Safety Precautions A Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product If the computer emits smoke or there is a burning smell disconnect the power plug from the wall outlet and contact a service center immediately If your notebook is an external amp removable battery type remove the external battery There is a danger of fire Do not use a damaged or modified CD There is a danger of damaging the product or personal injury Do not insert your fingers into the PC Card Slot There is a danger of injury or electric shock Use recommended computer cleansing solution when cleaning the product and only use the computer when it is completely dried Failure to do so may cause electric shock or fire
3. Emergency disk eject method using paperclip should not be used while the disk is in motion Make sure to use the emergency disk eject method only when the Optical Disk Drive has stopped There is a danger of injury Chapter 1 Getting Started Do not place your face close to the Optical Disk Drive tray when it is operating There is a danger of injury due to an abrupt ejection Check CDs for cracks and damage prior to use It may damage the disc and cause problems with the device and injury to the user Do not leave the product in a location exposed to magnetic fields e A magnetic field may cause the product to work abnormally or the battery to discharge e The information saved on the magnetic tape of a credit card phone card bankbook transportation tickets and so on can be damaged by a computer s electromagnetic field Safety Precautions A Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product Upgrade Related Carefully touch a part or device of the product Failing to do so may result in damage to the product or injury Take care not to throw or drop a computer part or device Failing to do so may result in damage to the product or injury After the disassembly be sure to close the cover and then connect the power Failing to do so may result in an electric shock from the exposed circuit Use parts authorized by Samsung Electr
4. User Guide Contents Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off Chapter 2 Using Windows 31 32 35 37 41 What is Microsoft Windows Screen At a Glance Using the Charms Using Apps Windows Hot Key Function Chapter 3 Using the computer 43 46 50 51 54 58 59 61 64 66 76 Keyboard Touchpad CD Drive ODD Optional Multi Card Slot Connecting an External Display Device Adjusting the Volume LCD Brightness Control Wired Network Wireless Network Optional Using the TPM Security Device Optional Samsung Software Update 77 Diagnosing the Computer Status and Troubleshooting 78 Using the Security Slot 80 BIOS Setup 82 Setting a Boot Password 85 Changing the Boot Priority 86 Battery Chapter 5 Troubleshooting 91 Recovering Backing up the Computer Optional 98 Reinstalling Windows Optional 101 Q amp A Chapter 6 Appendix 106 Important Safety Information 108 Replacement Parts and Accessories 110 Regulatory Compliance Statements 123 WEEE Symbol Information 124 Samsung Packaging Take Back Program 125 Product Specifications 127 Glossary Chapter 1 Getting Started Before You Start Safety Precautions Proper Posture During Computer Use erview Before You Start Before reading the User Guide first check the following information EA SS Optional i
5. Optional Connecting to a Wireless LAN If there is an AP you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows 1 If you click the Charms menu gt Settings gt Network Connections Mi icon a list of available APs appears If you select an AP to connect to the Connect button appears Gei Networks View Connection Settings Airplane mode Off alll ABCDEFG alll XXXXXXX AP List d XXXXXXX XXXXXXX all Chapter 3 Using the computer If a network key is set for the AP enter the network key and then click OK Click Connect s For the network key please ask your network administrator Networks View Connection Settings Airplane mode Off On all ABCDEFG Connect automatically alll XXXXXXX all XXXXXXX When the AP connection is completed Connected is displayed next to the corresponding AP You can now use the wireless network Using the TPM Security Device Optional EE Q Setting Up the TPM A TPM Trusted Platform Module security device is a security solution that protects your personal information by saving the user authentication data on the TPM chip installed on the computer E To use the TPM function you have to complete the following To use the TPM security device you have to initialize the TPM chip ate Re in the BIOS Setup initialize the TPM program and then register ae baue 1 Initializing the T
6. Z You cannot select a DVD drive Backing up ver Backup 1 To back up your computer to an external storage device d DEE connect the external storage device and select the relevant nennen d ri ve i Backup point 09 11 2012 Backup size 14 0GB Please select a drive for saving backup data Se e ct t h eC d ri VO Windows System Diagnostic to save to Diag s Windows before backup Requires additional time iagnose Estimated time for backup 8 minutes 2 minutes diagnostics time 0 Disk copy Factory image Ee Run backup server 3 The backup process is performed based on the instructions Troubleshooting Recovering Backing up the Computer Optional Chapter 5 Q Recovering 4 The recover is performed based on the screen instructions You can use your computer after the recover is completed You can recover your computer using the backup from the above process 1 If the backup image is saved to an external storage device connect the device 2 Start Recovery and click Recover 3 Select a Recover Option and click Recover Select a point to recover L Recover Recover A function that recovers the computer to the factory settings or recovers Windows to previously saved settings All contents of C drive will be deleted Select recovery point Recover to selected point Date 08 11 2012 Source HDD Inspecting recovery poi
7. or bottom right corner of the screen to display the Charms Tap Settings gt Help 5 If you are connected to the internet you can access the most recent online Help Chapter 2 Using Windows Viewing Help Tips On the Start screen select Help Tips hi 3 Windows menu operations are provided in two different ways mouse manipulation and gestures Screen At a Glance The following two screens are provided the Start screen and the desktop Desktop This provides similar functions to those provided by the desktop in prior Windows 8 versions Start screen Samsung ATIV EJ A sc 1 Desktop Displaying the Charms 3 Charms 4 Start button Chapter 2 Using Windows Refers to the Desktop The Charms is hidden at the right of the screen The Charms appears as shown e Touchpad mouse Place the mouse pointer over the top or bottom right corner of the screen This refers to the menu that allows you to use functions such as Search Share Start Device and Settings Move to the Start screen Right click this button and select Shut down or Control Panel to your needs Screen At a Glance Using Windows Launch applications on the Start screen KS On the desktop click the Start button Ch or open the Charms Control Hanel Control Panel and select the Start charm File Explorer File Explorer Search Run Using the Start button Right click t
8. remove the battery pack to find number Once you have the FCC ID number for a particular product follow the instructions on the website and it should provide RF exposure information or values for typical or maximum SAR for particular product For corresponding model only The Specific Absorption Rate SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram W kg The FCC wireless devices to comply with a safety lilmit of 1 6 watts per kilogram 1 6W kg SAR level of this device while operating can be well below the maximum value This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network In general the closer you are to a wireless base station antenna the lower the power output Regulatory Compliance Statements Unintentional Emitter per ICES 003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada Intentional Emitter per RSS 210 This device complies with RSS 210 of Industry Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device The term IC before the equipment certification number only si
9. 1999 5 EC Regulatory Compliance Statements pl Magyar Hungarian Polski Polish Portugu s Portuguese Slovensko Slovenian Slovensky Slovak Suomi Finnish Svenska Swedish Alulirott Samsung nyilatkozom hogy a Notebook PC megfelel a vonatkoz alapveto k vetelm nyeknek s az 1999 5 EC ir nyelv egy b eldirasainak Niniejszym Samsung o wiadcza Se Notebook PC jest zgodny z zasadniczymi wymogami oraz pozosta ymi stosownymi postanowieniami Dyrektywy 1999 5 EC Samsung declara que este Notebook PC est conforme com os requisitos essenciais e outras disposi es da Directiva 1999 5 CE Samsung izjavlja da je ta Notebook PC v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolo ili direktive 1999 5 ES Samsung t mto vyhlasuje e Notebook PC spina z kladn po iadavky a v etky pr slu n ustanovenia Smernice 1999 5 ES Samsung vakuuttaa t ten ett Notebook PC tyyppinen laite on direktiivin 1999 5 EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen H rmed intygar Samsung att denna Notebook PC star verensst mmelse med de v sentliga egenskapskrav och vriga relevanta best mmelser som framg r av direktiv 1999 5 EG slenska Icelandic Norsk Norwegian T rkiye T rk e Chapter 6 Appendix Q H r me l sir Samsung yfir v a Notebook PC er samr mi vi grunnkr fur og a rar kr fur sem ger ar er
10. Signals Certification Information This product can contain an embedded radio transmitter and receiver It is designed and manufactured not to exceed the exposure limits for radio frequency RF energy set by the Federal Communications Commission FCC of the U S government These FCC exposure limits are derived from the recommendations of two expert organizations the National Council on Radiation Protection and Measurement NCRP and the Institute of Electrical and Electronics Engineers IEEE In both cases the recommendations were developed by scientific and engineering experts drawn from industry government and academia after extensive reviews of the scientific literature related to the biological effects of RF energy Before a new model is available for sale to the public it must be certified to the FCC that it does not exceed the exposure limit established by the FCC Evaluation per each model is performed in positions and locations e g at the bottom on the body as required by the FCC For body worn operation this model meets the FCC RF exposure guidelines when used with Samsung accessory designated for this product Non compliance with the above restrictions may result in violation of FCC RF exposure guidelines Chapter 6 Appendix RF exposure or SAR information can viewed on line at http www fcc gov oet ea fccid This site uses this product FCC ID number on the outside of the product Sometimes it may be necessary to
11. When the virtual drive PSD does not appear You can only use the virtual drive PSD when you have selected the Personal Secure Drive PSD option during the program registration If you have not selected the option during the registration complete the following steps 1 Right click the icon Zi on the taskbar Run the Security Platform Management item with the admin authority Click the Security Platform Configuration When the Initialization Wizard appears select Personal Secure Drive PSD and enter the user password Click Next several times according to the instructions of the Initialization Wizard to finish the wizard When the virtual drive PSD is not loaded To use the virtual drive PSD the virtual drive PSD should be loaded first If it is not loaded you can load it according to the procedures below 1 Right click over the Security Platform Pa icon in the system tray of the Taskbar and select Personal Secure Drive gt Load from the pop up menu 2 In the load window enter the basic user password and click OK 3 Open the File Explorer You will see the Personal Secure drive in the left tree pane Note that when you have copied confidential data to the PSD the original data files are not encrypted Using the TPM Security Device Optional Deech Q Deleting the virtual drive When you have to register again to erase the authentication information on the TPM chip If a virtual dri
12. Windows to previously saved settings Recover to selected point Date 08 11 2012 S Inspecting recovery point Inspection recovery file Requires additional time Estimated time for recovery 3 minutes 2 minutes diagnostics time Partition settings When the partition is set all the data in all the drives will be deleted 0 Disk copy Lo Factory image J Maintain user data 1 E Run backup server Wi j BEE Help Function Description Recover Restores the entire Windows drive Back Up You can back up your entire Windows drive zZ N A Recovery may not be provided or may be a different version depending on the model Some functions may differ slightly or be excluded depending on the version Refer to the program s Help section for more information For models whose hard disk or SSD capacity is less than 64 GB the Recovery program is not provided An ODD CD DVD drive etc is not supported by the Recovery program Since restoring the system deletes all data and user installed programs saved after your last restore point it is advisable to back up any important data before restoring your system Recovering Backing up the Computer Optional Chapter 5 Q Troubleshooting Recovering 3 If the initial menu screen appears click Recover Select a recovery point and click Recover You can restore the computer settings to the factory defa
13. computer to the default settings normally Computer Recovery Function in Windows 5 For models where the SSD is less than 64GB use the Windows eh ye After recovery click the bottom left icon on the Start System Restore function instead of the Recovery program e screen and run SW Update 1 Click Charms gt Settings gt Change PC settings gt Update and recovery gt Recovery 2 Click the Get started button for Refresh or Remove If your PC does not work properly you can restore your PC while keeping your media Refresh files such as your photo video and music files etc as well as your personal documents You can remove all items in your PC and Remove reinstall Windows again 5 You should back up the files in the following folders before using the PC Recovery function since these files are not kept Windows Program files Program files x86 ProgramData OEM Folder ex c samsung User lt user name gt AppData Reinstalling Windows Optional You can reinstall Windows using the SYSTEM RECOVERY MEDIA for Windows when Windows is no longer working properly For models supplied with a SYSTEM RECOVERY MEDIA EA LI Se e If you cannot start Windows or if you want to delete A SYSTEM RECOVERY MEDIA may not be supplied depending on your computer model all existing data and reinstall Windows install Windows according to the descriptions in Reinstalling when Windows doe
14. covered with dust KH Failure to do so may result in fire If water or other conductive substances e g Chapter 1 Getting Started AC Adapter Usage Precautions Connect the power cord to the AC adapter firmly Otherwise there is a danger of fire due to an incomplete contact Use only the AC adapter supplied with the product Using another adapter may cause the screen to flicker Do not place heavy objects on top of or step onto the power cord or AC adapter to avoid damaging the power cord or AC adapter If the cord is damaged there is a danger of electric shock or fire Unplug the wall mount AC adapter adapter and plug intergrated type from the wall outlet while holding the body and pulling it in the direction of the arrow If you unplug the adapter by holding and pulling the cable the adapter may be damaged and an electric shock explosive sound or spark may occur as a result Safety Precautions Madh A Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality Do not use the computer in a badly ventilated location such as on bedding on a pillow or cushion etc and do not use it in a location such as a room with floor heating as it may cause the computer to overheat Battery Usage Related Take care that the computer vents on the side or the bottom are not blocked especially
15. in 7 these environments If the vents are blocked DR Please charge the battery fully before using the the computer may overheat and it may cause a computer for the first time computer problem or even an explosion Do not use the computer in a humid location such as a bathroom or sauna Keep the battery out of the reach of infants and pets as they could put the battery into their mouths Please use the computer within the recommended temperature and humidity ranges 10 35 C 20 80 RH There is a danger of electric shock or choking Use an authorized battery and AC adapter only Do not close the LCD panel and put the computer into your bag to move it when it is still turned on Please use an authorized battery and adapter approved by Samsung Electronics If you put the computer into your bag without turning it off the computer may overheat and there is a danger of fire Shut the computer down properly before moving it Unauthorized batteries and adapters may not meet the proper safety requirements and may cause problems or malfunctions and result in an explosion or fire Safety Precautions suing ene Q A weaning Usage Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality Disconnect all cables connected to the Never heat the product or battery or put the product or battery into a fire Do not put or use the p
16. select in a Pin to Start Chapter 5 Troubleshooting Q3 How can I uninstall the driver A Onthe Desktop click Charms gt Settings gt Control Panel gt Uninstall a program Alternatively right click the Start button and click Programs and Features Click the program Then click uninstall Q 4 How can I change the screen settings environment settings color and so on A Click Charms gt Settings gt Change PC Settings gt PC and devices You can set the OS settings such as the screen design etc To configure your computer in detail click the Charms menu in Desktop gt Settings gt Control Panel You can configure your computer in the same way as existing Windows systems Q amp A Q5 A Q6 Active X does not run in Internet Explorer on the Start screen Since Internet Explorer on the Start screen complies with the HTML5 web standards it does not support Active X However Internet Explorer on the Desktop supports Active X gt How to activate Active X If you right click over the Internet Explorer the following window appears Press the A button and click View on the Desktop Active X is now enabled want to remove the pre installed Windows 8 or Windows 8 1 and install a different OS If you want to install a different operating system on your PC you need to change the BIOS settings first For more information visit http www samsung com and go to Customer Support gt Troub
17. the desktop Right click this button and select Shut down or Control Panel to your needs Using the Charms The Charms is a new type of menu that combines the Start menu with the Control Panel of existing Windows The Charms allows you to quickly configure the device s connected to your computer search for App s file s and use the sharing function etc Activating the Charms To open the Charms do the following e Touchpad mouse Place the mouse pointer over the top or bottom right corner of the screen Displaying St the Charms Menu Charms a Displaying Bi the Charms Menu p Search r RA Share Start a Device xt Settings Chapter 2 Using Windows Perform the keyword search to produce an integrated list of search results covering apps files and web pages Share different types of files with others through email communications Move to the Start screen or open the last run app Find and use connected devices such as printers and display monitors Configure the computer or app settings to your preference Using the Charms Changing the Settings Frequently used Windows menus are collected Click the Charms gt Settings E aK A a P wf Available 5 Bnghtness ante Notifications Keyboard Change PC settings Chapter 2 Using Windows a 5 Function Description You can connect to a wireless networ
18. the diagnosing process is finished the System Status menu displays a list of the current problems to be solved as 5 Support Center may not be provided or may be a different shown version depending on the model Searching for 1 Click the bottom right icon on the Start screen and click computer s problems Support Center Diagnosing Computer and Troubleshooting acte System Problems FAQ for gt ER di computer s wm Windows automatic updates setting error recommended e mM d O r p ro b e Mm S Use the Windows automatic updates feature to keep your system up to date v IE Tracking Protection By enabling IE Tracking Protection feature you can prevent your private information being shared without your permission Boot System Protection Protecting the boot system helps to prevent boot problems v Urgent message from Samsung It automatically receives urgent message such as security and virus inf S Q Internet Assistance Support personnel can help yo h the issues via the Internet update p Automatically updates Windows Defender System Information Windows Defender Off Model Antivirus is not installed Use Windows Defender to protect your system from viruses and malicious code S N Windows Defender Off 3 You can solve a problem by clicking the Troubleshoot button for the problem Using the Security Slot You can secure the computer by connecting a lo
19. the function may differ depending on the model Some usage procedures may differ depending on the version e For detailed usage procedures refer to the description in the Touchpad Settings window Configuring the Gesture Function Some gesture functions may not be configured Drag Function In this case you can configure them using the following path Dragging refers to moving an item to another place after selecting l t 1 Click the Charms menu gt Settings 1X gt Control Panel gt Press and hold down the left touchpad button over an item you Harcware aid zung gt TOUCH AG Icon want to drag and move the item to the new location l l l When the Touchpad Settings window appears click the corresponding item in the Select an Item to Configure Move setting to select the checkbox for the corresponding item Holding down the left touchpad button 5 To cancel the Gesture function deselect the checkbox for the corresponding item in the Touchpad Settings window Touchpad The Scroll Function This function is the same as the scroll area of the Touchpad If you place two fingers over the Touchpad and move them up down left or right the screen is scrolled up down left or right accordingly Zoom Functions If you place two fingers over the Touchpad together or apart the current image or text is Zoomed in or out A or Ae Chapter 3 Using the computer If you place you
20. wastes for disposal India Only For more information on safe disposal and recycling visit our website www samsung com in or contact our Helpline numbers 18002668282 180030008282 This product is ROHS compliant Chapter 6 Appendix SN Correct disposal of batteries in this product Applicable in countries with separate collection systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material re use please separate batteries from other types of waste and recycle them through your local free battery return system USA ONLY This Perchlorate warning applies only to primary CR BC Maganese Dioxide Lithium coin cells in the product sold or distributed ONLY in California USA Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect Or call 877 278 0799 For battery recyc
21. D Ze e Saving battery power consumption S Decreases the LCD brightness when the computer is running on battery power to save battery power consumption e LCD bad pixels principle of computer Samsung observes the specifications regarding strict quality and reliability of LCD But in spite of that it is inevitable that there might be a small number of bad pixels A large number of bad pixels can cause problems in appearance but a small number of pixels doesn t affect the computer performance Therefore Samsung observes and manages the following dot principles Bright dot 2 or less Black dot 4 or less Combination of Bright and Dark 4 or less Using the computer Wired Network pine to Q A wired network is a network environment used for a company 2 Click Charms menu on the Desktop gt Settings gt network or broadband internet connection at home Control Panel Networkand internet Networkand Sharing Center and click on Change adapter settings in E e This manual is based on the latest Windows The content the left menu pane or pictures may differ from the actual model depending on the Windows version However most of the basic operations are similar as in the previous versions of gt E gt Control Panel gt Network and intemet Network and Sharing Center Wi ndows ope rati ng system e View your basic network information and set up connections 5 5 X View your active networks e The figures
22. Hz bands These radar stations can cause interference with and or damage to this device The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E I R P limit for the 5 25 to 5 35 and 5 725 to 5 85 GHz frequency range in point to point operation The power output of the wireless device or devices which may be embedded in your notebook is well below the RF exposure limits as set by Industry Canada Regulatory Compliance Statements Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device To prevent radio interference to licensed service this device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing DR Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service Chapter 6 Appendix Este produto esta homologado pela ANATEL de acordo com os procedimentos regulamentados pela Resolucao 242 2000 e atende aos requisitos tecnicos aplicados Este equipamento opera em car ter secund rio isto n o tem direito a prote o contra interfer ncia prejudicia
23. PM chip Initializes the authentication information saved on the TPM chip Ze e This function is only supported for models with TPM 7 security chip 2 Installing the TPM program e For more information refer to the online help for the Installs the TPM program program e The program version described in this manual is subject to 3 Registering the TPM program change and the screenshots and terms used in this manual Registers the TPM program may differ from the actual product If you complete the steps above you can use the TPM function Using the TPM Security Device Optional Initializing the TPM chip 1 When you use the TPM function for the first time or you want to register the user again you have to initialize the TPM chip DR e Initializing the TPM chip erases all authentication information saved on the TPM chip Any decision to initialize must be taken carefully e To initialize the TPM chip again while the TPM function is in use you have to decrypt any existing files and folders encrypted by the TPM function first Otherwise you will not be able to access the files and folders after re initialization Chapter 3 Using the computer When the Samsung logo screen appears press the F2 key repeatedly Restart the computer If the BIOS appears select the Security gt TPM Configuration Samsung BIOS Configuration Supervisor Password User Password HDD Password Pow
24. Please select an initialization method You are recommended to use a removable media to store important data Which drive do you want to use F KBD32G Removable media Restoration or advanced initialization for expert users Allows restoration of a previous configuration or initialization with advanced configuration of secret data data file locations and features Required to configure Enhanced Authentication Ze If the status not initialized message appears click Yes If you backup the emergency recovery file to an external storage device according to the instructions of the Initialization Wizard you can use the TPM security device more Safely Chapter 3 Using the computer Select a Security Platform Feature and set a basic user password Complete the registration according to the instructions The user registration for the TPM program has been completed You can encrypt files and folders by using the encryption file system and use files and folders to be encrypted by creating or copying them to the virtual drive The virtual drive is created in the following location Oe rr Computer gt v p Search Co Organize v System properties gt a e loads z ER H emeng 4 Hard Disk Drives 2 Ei Recent Places Libraries E Documents a Music sl Pictures S Videos BR Computer a o amp Local Disk C DVDRW _ USBDrive T ew USBDrive T4 E Drive D 4 E ca Personal Secur
25. Using this menu you can configure the major Setup Menu chipsets and additional functions Used to configure security functions including I l Security Samsung BIOS Configuration passwords a This menu enables you to configure peripherals SATA Port 1 10000000000 Boot and booting related settings such as the boot GA Type Cor oe aon priority CPU Speed x Xx GHZ CPU VT VT x Supported Total Memory xxxx MB BIOS Version EOOAAT 017 120804 dg MICOM Version EOOAAT O17 Help Setup Items Help for the selected item appears automatically Setting a Boot Password Chapter 4 Settings and Upgrade If you set a password you have to enter the password when you turn the computer on or enter the BIOS Setup By configuring a password you can restrict system access to authorized users only and protect data and files saved on the computer z The password setting provides the following 3 sub menus Supervisor Password User Password and HDD Password Do not lose or forget your password Do not let others know your password If you forget the Supervisor Password or HDD Password you will need to request assistance from the service center In this case a service fee will be charged When you forget the User Password you can disable the Supervisor Password and the User Password is also automatically disabled The screen images and terms may differ from actual product depending on the computer model and
26. activates the user password In the Set User Password select and complete the procedures from Step 3 of Setting a Supervisor Password Setting Up a Boot Password To setup a boot password the administrator password Set Supervisor Password should be set in advance Set the Password on boot item to Enabled Once a boot password is set you have to enter a password to boot up the computer Be sure to remember the password for later use Setting a Boot Password Setting up a Hard Disk Drive Password Optional If you set a password for a hard disk drive it cannot be accessed from another computer Select in the Set HDD Password item and define a password as described in Step 3 of the Setting up the Supervisor Password i e The hard disk drive password setting function is not provided for some models e Changing the hard disk drive password For security purposes you can only change a hard disk drive password after restarting the computer by pressing the computer Power button If you cannot change the hard disk drive password or the HDD Password Frozen message appears when entering the BIOS Setup and then selecting Security gt HDD Password press the Power button to turn the computer on again Chapter 4 Settings and Upgrade Deactivating the Password A N gl Select on the password to be deactivated To unlock the admin password for instance press Set Supervisor Password In the E
27. ad mouse Move the mouse pointer to the top edge The pointer changes to the palm shape Then drag the mouse to the left or right 3 Arrange the position of each split screen as appropriate 4 Move the Screen Split Bar to change the screen split ratio Weather Screen App Split Bar Store App Store Spotlight Ex If you run the Weather App and Store App at the same time Chapter 2 Using Windows Adding Removing an App to from the Start Screen 1 Move to the Apps screen Touchpad mouse Click the icon in the bottom left corner of the Start screen Right click the app to display the apps list Select Pin to Start or Unpin from Start Gei l Ex When removing an App in the Start screen Using Apps Camera App at a Glance Use the OS provided camera app to take photos or make movies and edit them to your preference 1 Select Camera from the Start screen 2 To take photos select J To make movies select EN Chapter 2 Using Windows To play the photo or movie gt To play the Camera taken photos instantly e Touchpad mouse Click the arrow symbol in the left of the screen gt On the Start screen Select Photos Il gt Camera Roll You can play a continuous roll of captured photos and videos To edit photos 1 Select a photo to edit Swipe upward from the bottom edge of the screen Alternatively right click the photo A Then select Edit and do the editing to you
28. aphic chipset you have to register the program in the NVIDIA Panel il use For nronrams require a snecifi Some programs are pre registered To register more programs e g 3D games etc complete the following steps 5 The program has been registered 1 Right click over the Desktop and select NVIDIA Panel When you run the registered program the program is executed using the external graphics chipset without l requiring additional configuration 2 Select 3D Settings gt Manage 3D settings in the left pane and select the Program Settings tab Adjusting the Volume You can adjust the volume using the keyboard and the volume control program Adjusting the Volume using the Keyboard Alternatively press the key combination to turn the volume on or off Adjusting the Volume using the Volume Adjustment Program Click the Charms menu gt Settings gt T to adjust the control bar Mute Chapter 3 Using the computer Using the Sound Recorder The procedures to record sound using the Windows Recorder are described below 1 Connect a microphone to the microphone jack You can also use the internal MIC 2 Right click over the Volume icon on the taskbar and select Recording Device 3 Check if the microphone is set as the default recording device If this is the case it is already set as the default device If not right click over the microphone and sele
29. appropriately y Since the representative figures of the power plug and e If the plug pins are not inserted into the center of the holes the MP tee adanierare used thes E trom she acu plug pins are only inserted up to half their length In this case parts reconnect the power plug e You have to insert the power plug into the outlet when the power indicator LED of the power outlet is lit green If the power is connected properly the power indicator LED remains green Otherwise the power indicator LED is turned off In this case unplug the power check if the power indicator LED is green and then reconnect the power plug Power Indicator LED 220V Power Plug 110V Power Plug Good Example Wrong Example X Safety Precautions Chapter 1 Getting Started When Using the Auto Adapter When a cigar socket is provided you have to use the auto adapter optional Insert the cigar plug of the auto adapter into the cigar socket and connect the DC plug of the auto adapter to the power input port of the computer Auto Adapter Cigar Plug In flight Cigar Socket When Using the Airplane Charging Coverter Depending on the airplane you have to use the auto adapter and charging converter Connect the airplane charging converter optional to the auto adapter optional and then insert the airplane power input jack into the power outlet Charging 1 Connect this end to Converter the auto adapter 4 Le Co
30. ard The keyboard may differ depending on your country The following mainly describes the shortcut keys Shortcut Keys While pressing and holding the Fn key press a shorcut keys Alternatively press the Fn Lock key as well as a hot key to use the hot key functions more easily gt Method 1 SH F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 O Bo dx Ch C dp Shortcut Keys gt Method 2 Fn Loc Shortcut Keys Chapter 3 Keyboa rd Using the computer e Settings The Samsung software control program the Settings is launched Screen Brightness Control Controls the screen brightness F3 FA Switches the screen output to the LCD or external monitor when an external monitor or TV CRT LCD is connected to the computer Turns the Touchpad function on or off Touchpad When using an external mouse only you can turn the Touchpad off ww Press this button to turn the audio on or off Volume Control Controls the volume Silent Mode Reduces the Fan noise so that users can use the computer without hearing noise Turns all wireless network devices on or off Only for models with a wireless network device is 2 U F d 5 F6 dx F7 Ch 8 q F TT ee Ph CH 11 F12 A Airplane Mode Keyboard Other Function Keys 52 If the hot keys do not work properly you have to install the Settings Performs the right c
31. ating indicator Optional Camera Optional LCD Speaker Power Button d Power Button LED Keyboard Touchpad Touchpad Buttons Chapter 1 Getting Started This indicates the camera operating Status Using this camera you can take still pictures and record video You can take a picture or make a movie using the Charms gt Start gt Camera The screen images are displayed here A device used to generate sound Turns the computer on and off When the computer is on the power button LED is lit A device to enter data by pressing the keys The touchpad and touchpad buttons provide functions similar to the mouse ball and buttons Overview Right View CD Drive ODD Optional USB Port gt Security Slot Ff mmm mmm mmm Wem Wem Chapter 1 Getting Started Plays CD or DVD titles A CD Drive is optional The installed drive may differ depending on the model specifications You can connect USB devices to the USB port such as a keyboard mouse digital camera etc You can secure the computer by connecting a lock and cable to the Security Slot Overview DC Jack oe Wired LAN Port 45 Fan Vents Monitor Port ICH Digital Video Audio Port HDMI Homi Optional USB Port gt Optional Ear set headset Jack A Multi Card Slot KZ Microphone Optional Chapter 1 Getting Started A jack to connect the AC adapter that suppli
32. cause electric shock or fire hazard Safety Precautions geg A earning Upgrade Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality Avoid direct sunlight when the computer is in an air tight location such as inside a vehicle There is a danger of a fire hazard The computer may overheat and also present opportunity to thieves Do not use your computer for long periods of time while any part of your body is making direct contact with it The temperature of the product may increase during normal operation This may result in harming or burning your skin Be sure to upgrade the computer by yourself only if you have sufficient knowledge and ability If this is not the case ask for assistance from the service center or an authorized engineer for the upgrade Be sure to upgrade only the parts specified in the user manual according to the procedures described in the user manual Do not disassemble any other parts or devices by yourself There is a danger of a electric shock fire or damage to the product Never disassemble the power supply or AC adapter There is a danger of electric shock When removing the RTC Real Time Clock battery keep it out of the reach of children as they could touch and or swallow it There is a danger of choking If a child has swallowed it contact a doctor immediately Safety Precautions A Warning Failu
33. ck and cable to the Security Slot To use this feature you have to purchase the lock and cable additionally To use the lock and cable refer to the product manual Tie the lock and cable to a fixed object and install the other end of the cable to the security slot Chapter 3 Using the computer Chapter 4 Settings and Upgrade BIOS Setup Setting a Boot Password Changing the Boot Priority Battery 80 82 85 86 BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs Z Use the BIOS setup to define a boot password change the booting priority or add a new device Since incorrect settings may cause your system to malfunction or crash take care when configuring the BIOS The functions of the BIOS setup are subject to change for product function enhancement purposes The BIOS Setup menus and items may differ depending on your computer model Chapter 4 Settings and Upgrade Entering the BIOS Setup Turn the computer on Immediately press the F2 key several times After a moment the BIOS setup screen appears The items in the BIOS setup may differ depending on the product Chapter 4 BIOS Setup Settings and Upgrade The BIOS Setup Screen Setup Menu Description 4 The BIOS Setup menus and items may differ depending on Sysinfo This is a description about the basic Ka your computer model specifications of the computer Advanced
34. ct Set default 4 Click the bottom left icon on the Start screen and then click Sound Recorder Click Start recording Start Recording UU LCD Brightness Control euni Controlling the Brightness Using the Keyboard Switching the picture mode You can switch the picture mode to your preferred viewing pleasure such as optimizing the display for movies or electronic Adjustment icon O books Click the Charms menu gt Settings gt Screen 2 Adjust the brightness with the screen brightness control bar 1 Click the bottom left icon on the Start screen 2 Click Settings gt Display gt Color tone Dynamic This will make the picture clear and sharp Standard Standard picture mode Movie Switch to this mode when the ambient lighting is dark or when watching movies Movie Bright This will make a darker scene brighter for distinction Read Suitable for reading electronic books No Effect This is the default picture mode LCD Brightness Control ees weie Q EA The screen brightness is automatically set to the brightest DR Instructions for Cleaning the LCD level when AC power is connected and the brightness is Clean the LCD panel with a soft cloth lightly moistened with automatically set dimmer when the computer runs on battery computer cleansing detergent moving in one direction power to extend the battery use time Cleaning the LCD panel with excessive force can damage the LC
35. ctive 1999 5 EC Por medio de la presente Samsung declara que el Notebook PC cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999 5 CE all EAANVIKh Greek Frangais French Italiano Italian Latviski Latvian Lietuvi Lithuanian Nederlands Dutch Malti Maltese Chapter 6 Appendix Q ME THN MAPOY2A Samsung AHAQONEI OTI Notebook PC 2YMMOPOONETAI MPO2 TIX OY IQAEI ANAITH EI KAI TI2 AOINED 2 XETIKE AIATA EI2 TH OAHTIA2 1999 5 EK Par la pr sente Samsung d clare que l appareil Notebook PC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5 CE Con la presente Samsung dichiara che questo Notebook PC conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999 5 CE Ar o Samsung deklar ka Notebook PC atbilst Direkt vas 1999 5 EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem iuo Samsung deklaruoja kad is Notebook PC atitinka esminius reikalavimus ir kitas 1999 5 EB Direktyvos nuostatas Hierbij verklaart Samsung dat het toestel Notebook PC in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 1999 5 EG Hawnhekk Samsung jiddikjara li dan Notebook PC jikkonforma mal ti ijiet essenzjali u ma provvedimenti o rajn relevanti li hemm fid Dirrettiva
36. ctronics Co Ltd owns the copyright of this manual No part of this manual may be reproduced or transmitted in any form or by any means electronic or mechanical without the consent of Samsung Electronics Co Ltd The information in this document is subject to change without notice due to improving the performance of the product Samsung Electronics shall not be liable for any data loss Please take care to avoid losing any important data and backup your data to prevent any such data loss OS and Software Support If you change the product s factory OS Operating System to another OS or if you install software which is not supported by the product s original factory OS you will not receive any technical support product exchange or refund And a fee will be charged when requesting a service Please use your computer with the original factory OS If you install an OS other than the factory OS data may be deleted or the computer may not start Chapter 1 Getting Started Q About the Product Capacity Representation Standard About the capacity representation of the storage The capacity of the storage device HDD SSD of the manufacturer is calculated assuming that 1KB 1 000 Bytes However the operating system Windows calculates the storage device capacity assuming that 1KB 1 024 Bytes and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in ca
37. cture 3 Register your account through the following relevant procedures Chapter 2 Windows Hot Key Function Using Windows You can use the following convenient hot keys in Windows Function Hot Keys Function Description Displaying the Start Screen Windows Key Switches to Start mode Displaying the Desktop Windows Key D Switches to Desktop mode Running the Charms Windows Key C Activates the Charms Locking the Screen Windows Key L Locks the screen Opening the Ease of Access Center Windows Key U Opens the Ease of Access Center configuration Opening the Second Screen Settings Windows Key P Opens the External Monitor Settings menu Opening the Advanced Management Tool Windows Key X Opens the Advanced Management Tool Exit App Alt F4 Exits the currently running App Chapter 3 Using the computer Keyboard Touchpad CD Drive ODD Optional Multi Card Slot Connecting an External Display Device LS ui LS Adjusting the Volume S L VI LCD Brighi ness ontrol Wired Network Wireless Network Optional Using the TPM Security Device Optional Samsung Software Update Diagnosing the Computer Status and Troubleshooting Using the Security Slot 43 46 50 51 54 58 59 61 64 66 76 77 78 Chapter 3 Keyboa rd Using the computer Shortcut key functions and procedures are discussed in the following sections Ze e The keyboard image may differ from the actual keybo
38. d by doubling the operating speed of the SDRAM and is widely used nowadays This computer uses DDR SDRAM Device Manager An administrative tool used to manage computer devices You can add or remove hardware or update a device driver using the Device Manager DHCP Dynamic Host Configuration Protocol This refers to automatically allocating IP addresses to the users on the network by the network administrators Direct X An application interface developed to enable Windows application programs to access hardware devices at a very high speed Since the operating speed of graphics memory and sound cards must be very fast to provide high quality video and sound for games Direct X enables faster control and interaction between applications and hardware devices By using Direct X the multimedia performance of Windows has been hugely improved Driver Software that interacts between the hardware and the operating system An operating system knows the hardware information and controls the hardware In general a driver is supplied with the corresponding hardware device D sub D subminiature This is the cable connecting a general CRT monitor and the computer Analog video is output through this cable Chapter 6 Appendix Glossary DVD Digital Versatile Disk DVD was developed to replace CD compact disk Although the shape and size of the disc are the same as that of a CD the capacity of a DVD is at least 4 7GB w
39. driver version Setting a Supervisor Password If you set a Supervisor Password you need to enter the password when you turn the computer on or enter the BIOS Setup Setting only the Supervisor Password and User Password is not very secure You can use an HDD Password as well to increase the security level 1 Select the Security menu in the BIOS Setup 2 Select the Set Supervisor Password Samsung BIOS Configuration Supervisor Password User Password HDD Password Power On Boot Setting a Boot Password 3 Enter a password press Enter re enter the password for confirmation and press lt Enter gt again The password can be up to 8 alphanumeric characters Special characters are not allowed The supervisor password has been set The supervisor password is required to turn the computer on or to enter the BIOS Setup Ze For some models if the password entered message appears inthe Setup Notice window the settings are not complete until the lt Enter gt key is pressed Chapter 4 Settings and Upgrade Setting a User Password Using the User Password you can turn the computer on but you cannot change the major settings of the BIOS Setup because you cannot enter the BIOS Setup This helps prevent unauthorized access to the major settings in the BIOS Setup menu Before configuring a user password a supervisor password must have been configured Deactivating the supervisor password also de
40. e th Network e WR SAMSUNG PC Workgroup WORKGROUP AN Processor Intel R Core TM 15 CPU M520 2 40GHz Using the TPM Security Device Optional pes Using the TPM program E For more information about using the TPM program refer to the online help for the program Encrypting a file folder This function enables encrypting files and folders You can safely protect documents through the Encrypt File System EFS s The Encrypt File System EFS function is supported by the following operating systems e Windows 7 Professional Enterprise Ultimate e Windows 8 Pro Enterprise e Windows 8 1 Pro Enterprise Right click over the folder or file to be encrypted and select Encrypt from the pop up menu Security Platform Share with k Restore previous versions Personal Secure Drive Send to SCH D Using the computer Q 2 If the Confirm Attribute Changes window appears select the range to apply the encryption to and click OK This dialog box only appears when the folder is encrypted You are encrypting a file that is in an unencrypted folder If this file is modified the editing software might store a temporary unencrypted copy of the file To ensure that files created in the parent folder are encrypted encrypt the parent folder What do you want to do 3 In the user authentication window enter the Basic user password you entered when registering the user and clic
41. e move and delete data on the corresponding drive Multi Card Slot To format a memory card When using the memory card for the first time you must format the card before using it i Formatting a card deletes all data saved on the card If the card includes data backup the data before formatting it 1 Click the File Explorer icon on the taskbar at the bottom of the desktop 2 Right click the card drive and click Format 3 Click Start to the formatting Chapter 3 Using the computer To share a memory card with a digital device such as digital camera it is recommended to format the memory card in the digital device before use If you format a memory card on the computer and then insert the memory into the digital device you may need to format the memory card again in the digital device If there is a write protection device in the memory card and the device is set to the lock position you cannot format write data nor erase data from the card Repeatedly inserting and removing a memory card may damage the memory card SDIO Secure Digital Input Output ei ole tuettuna You cannot read or write copyright protected data Chapter 3 Connecting an External Display Device Dein If you connect an external display device such as a monitor TV About the connection cable projector etc you can view the picture on the wider screen of the external device when you give a presentation or watch a video
42. e computer The computer s time and date may differ from the current time if you turn on the computer for the first time or you have removed the battery or the battery has been completely discharged Set the time and date Turning the Computer On and Off Adjusting the screen brightness When the computer runs on battery power the LCD brightness is automatically set to low Press the key combination to increase the screen brightness 1 Open the Charms e Touchpad mouse Drag the mouse pointer to the top or the bottom right corner of the screen Increase the bar by pressing the Settings gt Brightness Be b Chapter 1 Getting Started Turning the computer off Ze e Since the procedures to turn the computer off may differ depending on the installed operating system please turn the computer off according to the procedures for the purchased operating system e Save all your data before clicking on Shut down On the desktop 1 Touchpad mouse Right click the Start button E on the bottom left corner 2 Click Shut down or sign out gt Shut down Control Panel File Explorer Search Run Shut down or sign out Chapter 1 Turning the Computer On and Off Getting Started On the Start screen On the Charms 1 Click Power at the upper right corner of the Start screen 1 Open the Charms Manual ga 0 2 e Touchpad mouse Drag the mouse pointer to the top or the bot
43. e notification area of the taskbar and select Power Options 2 If the following screen appears select one of the modes v Search Control Panel D Q gt T gt Control Panel Hardware and Sound Power Options Control Panel Home S Choose or customize a power plan Require a password on wakeup A power plan is a collection of hardware and system settings like display brightness sleep etc that manages how your computer uses power Tell me more about power plans Choose what the power button does Plans shown on the battery meter ieren what closing the lid e Balanced recommended Change plan settings Automatically balances performance with energy consumption on capable hardware Create a power plan KD Choose when to turn off the Power saver Change plan settings display Saves energy by reducing your computer s performance where possible Change when the computer sleeps Hide additional plans A C High performance Change plan settings Favors performance but may use more energy Battery Using the Battery Calibration Function Optional When charging discharging the battery repeatedly for a short time only the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display In this case the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Cal
44. e to the product Installation Related Do not block the ports holes vents etc of the product and do not insert water or other conductive substances e g liquid dust metal powders pencil leads etc Damage to a component within the computer may cause electric shock or fire When using the computer with it lying on its side place it so that the vents face upwards Failure to do so may cause the internal temperature of the computer to rise and the computer to malfunction or halt Do not place a heavy object over the product This may cause a problem with the computer In addition the object may fall and cause injury or damage the computer Chapter 1 Getting Started Battery Usage Related Dispose of worn out batteries properly e There is a danger of fire or explosion e The battery disposal method may differ depending on your country and region Dispose of the used battery in an appropriate way Do not throw or disassemble the battery and do not put it into water This may cause an injury fire or explosion Use only a battery authorized by Samsung Electronics Failure to do so may cause an explosion Avoid contact with metal objects such as car keys or clips when keeping or carrying a battery Contact with a metal may cause excessive current and a high temperature and may damage the battery or cause a fire Charge the battery according to the instructions in the manual Failure to do so ma
45. ed to the Windows old screen of Step 5 appears folder Click the OK button If the User Agreement screen appears select I accept the Q The subsequent steps are the same as those from Step 7 of license terms and then click Next Installing in Windows Q amp A You can look for potential problems that may occur with the system and view the relevant solutions Also you may look up any reference s required while operating the computer Recovery Related E Q1 What is a Recovery Area A Q2 Samsung computers have an additional partition to recover computers or save backup files Only for models with the Recovery This partition is called a Recovery Area and it includes a recovery image that comprises of the OS and application programs The capacity representation of the hard disk drive HDD in Windows is different from the product specifications The capacity of the storage device HDD of the manufacturer is calculated assuming that 1KB 1 000 Bytes However the operating system Windows calculates the storage device capacity assuming that 1KB 1 024 Bytes and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity The capacity representation in Windows may be smaller Chapter 5 Troubleshooting than the actual capacity because some programs occupy a certain area of the HDD outside of Windows For models with Recovery the HDD capacity representation in Windows may be
46. equipped with an internal embedded wireless device do not operate the wireless device unless all covers and shields are in place and the system is fully assembled Regulatory Compliance Statements DR e Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Please contact manufacturer for service e Only use drivers approved for the country in which the device will be used See the manufacturer System Restoration Kit or contact manufacturer Technical Support for additional information Chapter 6 Appendix Q United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body especially the face or eyes while transmitting Do not operate the radio or attempt to transmit data unless the antenna is connected if not the radio may be damaged Use in specific environments The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments The use of wireless devices on airplanes is governed by the Federal Aviation Administration FAA The use of wireless devices in hospitals is restricted to the limits set forth by each hospital DR Explosive Device Proxim
47. er 4 Settings and Upgrade Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures Confirming the battery charge in the Taskbar Disconnect the AC adapter and move the mouse cursor over the battery icon in the system tray of the Taskbar to confirm the remaining battery charge 5 hr 21 min 64 remaining UNIEN a Ped mal A ENG 4472014 Battery Usage Time Information A battery is an expendable supply so when using it over a long time the capacity battery life is shortened If the battery life is reduced to under half of its initial time we recommend purchasing a new battery When not using the battery for a long time store the battery after charging it to 30 40 of its capacity This extends the battery life time Battery Extending the Battery Usage Time Decreasing the LCD Brightness Click the Charms menu gt Settings gt Screen Adjustment icon O 2 Adjust the brightness with the screen brightness control bar The battery life will be extended Chapter 4 Settings and Upgrade Using the power management program This program helps you use the battery more efficiently and supports the power mode optimized for the operating environment 1 Click Charms menu on the Desktop gt Settings 1X gt Control Panel gt Hardware and Sound gt Power Options Alternatively right click the power measuring device icon in th
48. er On Boot Using the computer Using the TPM Security Device Optional eae Set the TPM Device item to On and set the TPM State to Select the Security gt TPM Configuration gt TPM State item Clear and set the item to Enable amp Activate Samsung BIOS Configuration 14 46 ives Samsung BIOS Configuration 14 46 ives Ei Sysinfc ef Advanced Tpm Device TPM State l l Enabled amp Activate Security Chip State clear Enabled amp Activate amp SysInfo e Advanced e TPM Device TPM State No Change Security Chip State Clear Enabled amp Activate Deactivate amp Disable Deactivate amp Disable Aptio Setup Utility Copy C 2012 American Megatrends Inc Aptio Setup Utility Copy C 2012 American Megatrends Inc Z Select Exit to save the changes Select Exit to save the changes The computer automatically restarts Initialization of the TPM When the computer restarts automatically and the Samsung chip has been completed logo screen appears press the F2 key repeatedly Now install the TPM program and register the TPM program Using the TPM Security Device Optional Installing the TPM program You can install the TPM program as follows Install the program according to the procedures below Ze This program is only provided for models with Recovery and the TPM function Method 1 1 Run Recovery and click on System Software If your computer does not boot up or if S
49. es power to the computer Connect the Ethernet cable to this port The internal heat of the computer is emitted through these holes i If the vents are blocked the computer may overheat Avoid blocking the vents as this may be dangerous A port used to connect a monitor TV or projector supporting a 15pin D SUB interface Z You can connect a VGA adapter optional You can connect an HDMI cable to this port Using this port you can enjoy digital video and audio on the TV You can connect USB devices to the USB port such as a keyboard mouse digital camera etc Z You can distinguish the type of port by color blue for USB 3 0 and black for USB 2 0 This is the jack for connecting an ear set or headset A card slot supports multi cards You can use the built in microphone Overview Bottom View This is a Lithium lon rechargeable 1 Battery battery that supplies power to the computer The latch used to remove or install 2 Battery Latches cx the battery Chapter 1 Getting Started Turning the Computer On and Off Turning the computer on 1 Connect the AC adapter 2 Lift the LCD panel up 3 Press the Power button to turn the computer on Chapter 1 Getting Started About Windows Activation When you turn the computer on for the first time the Windows activation screen appears Follow the activation procedures according to the instructions on the screen to use th
50. gnifies that the Industry Canada technical specifications were met To reduce potential radio interference to other users the antenna type and its gain should be so chosen that the equivalent isotropically radiated power EIRP is not more than that required for successful communication To prevent radio interference to the licensed service this device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing Chapter 6 Appendix If fitted with 2 4G band or 5G band Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4GHz 5GHz Band may be present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in Canada if an Industry Canada ID number is on the system label When using IEEE 802 11a wireless LAN this product is restricted to indoor use due to its operation in the 5 15 to 5 25 GHz frequency range Industry Canada requires this product to be used indoors for the frequency range of 5 15 GHz to 5 25 GHz to reduce the potential for harmful interference to co channel mobile satellite systems High power radar is allocated as the primary user of the 5 25 to 5 35 GHz and 5 65 to 5 85 G
51. gs assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings This connection uses the following items a File and Printer Sharing for Microsoft Networks O sd Microsoft Network Adapter Multiplexor Protocol i Microsoft LLDP Protocol Driver wt Link Layer Topology Discovery Mapper UO Driver Obtain an IP address automatically wi Link Layer Topology Discovery Responder IP address wi Internet Protocol Version 6 TCP IP v6 D Internet Protocol Version 4 TCP IPv4 Subnet mask Default gateway Install Uninstall Obtain DNS server address automatically Description CH Use the following DNS server addresses Transmission Control Protocol Internet Protocol The defaultwide area network protocol that provides communication across diverse interconnected networks Preferred DNS server Alternate DNS server _ Validate settings upon exit Advanced Cancel The Network Component name may differ depending on the Operating System Installed Ze When not using DHCP ask your network administrator for the To add a network component click Install in the screen IP address shown in the figure above You can add clients services and protocols 6 When you have completed the settings click the OK button The network settings have been completed Wired Network Using the WOL Wake On LAN function
52. he Start button E to select quick access menus Task Manager Shut down or sign out Power menu Desktop Start button ih R Screen Ata Glance ON Start Screen App User Account Power l Search Displaying the Charms Charms Desktop Refers to the default Start screen of Windows Refers to the apps that are currently installed Samsung Apps supplied with the original factory product are compatible with the product s supported OS Changing the OS may result in limited use of the Apps 10 Start button This refers to the currently used user account Turn off the computer or select Sleep mode and Restart Perform the keyword search to produce an integrated Search list of search results covering apps files and web pages The Charms is hidden at the right of the screen Place your mouse pointer at the edge of the top or bottom right of the screen to display the Charms This refers to the menu that allows you to use functions such as Search Share Start Device and Settings Switches to Desktop mode Chapter 2 Using Windows The Apps screen appears where a tile based list of all the apps installed on the computer is displayed This screen appears only when using the mouse This button appears only when using the mouse Move the mouse pointer to the bottom left corner to display the Start button Click the button to switch to the last run app screen or
53. he contents are displayed only on the screen of the external device J E Connect the power cord of the connected monitor TV or projector and turn the power on Ze Change your TV to external device mode when connecting to ew Ne ie Connecting an External Display Device euni Q Connecting through the HDMI port Optional By connecting the computer to a TV with a HDMI port you can enjoy both a high visual quality and a high sound quality After connecting a TV through HDMI you have to configure the screen and sound 1 Connect the HDMI cable to the HDMI port of the TV External Monitor T rT Ze e This is only supported for models that support a TV output e port HDMI e When a TV provides more than one HDMI port connect the computer to the DVI IN port e When connecting the computer to a TV switch the external input mode of the TV to HDMI Select Charms menu gt Devices _ gt Projector gt Second Screen Select a desired monitor mode PC Screen only E pa The contents are only displayed on the PC monitor current device Duplicate N H The contents of the current device are displayed on the external device as well Extend The screen of the current device is expanded to the external device N d Second screen Only J k The contents are displayed only on the screen of the external device 4 e External Monitor TV is not supported in the DOS C
54. hile the capacity of a CD is 600MB DVD video is digital unlike VHS analog video and supports MPEG2 compression and digital audio To play a DVD a DVD drive is required Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure HDMI This is a digital video audio interface specification that transmits video and audio signals over a single cable Hibernation Mode A power mode that saves all data in memory to the hard disk and turns the CPU and hard disk off When canceling Hibernation Mode all application programs that were running are restored to their last state Icon This refers to a small image that represents a file that users can use IEEE802 XX This is a set fo specifications developed by the 802 committee of IEEE for the LAN connection method called XX LAN Local Area Network A communications network connecting computers printers and other devices within a local area such as within a building A LAN enables all connected devices to interact with other devices on the network The current LAN uses the Ethernet media access control method developed in the early 1980s To connect to an Ethernet a network card called a LAN card Ethernet card or network interface card is required To exchange data between computers a protocol is required besides the hardware equipment Windows Vista uses TCP IP as the default protocol LCD Liquid Crys
55. ibration function and then recharging it again Ze The screen images and terms may differ from actual product depending on the computer model and driver version 1 Disconnect the AC power adapter after turning off the computer 2 Turn the computer back on and press the F2 key to enter the Setup screen 3 4 Chapter 4 Settings and Upgrade Select Advanced gt Smart Battery Calibration Samsung BIOS Configuration CPU Power Saving Mode Touch Pad Mouse USB Charge In Sleep Mode USB S3 Wake up The Battery Calibration function is activated and the battery is forcefully discharged To stop the operation press the lt Esc gt button This operation requires 3 5 hours depending on the battery capacity and the remaining battery charge Chapter 5 Troubleshooting Recovering Backing up the Computer Optional 91 Reinstalling Windows Optional 98 Q amp A 101 Po D Recovering Backing up the Computer Optional erste If a problem occurs with your computer Recovery recovery program allows you to easily restore your computer to the default factory settings Alternatively you can back up your computer so that you can restore it to your preferred state at any time Recovery Introduction Recove r J Recover A function that recovers the computer B a C k U p acku All contents of C drive will be deleted Select recovery point to the factory settings or recovers
56. ice s keyboard may break the LCD panel Cautions on Preventing Data Loss Hard Disk Management Take care not to damage the data on a hard disk drive e A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk e Take extra care because moving the computer or an impact on the computer when it is turned on may damage the data of the hard disk drive e The company is not liable for any loss of data on the hard disk drive e The data may be lost when an external impact is applied to the disk while disassembling or assembling the computer e The data may be lost when the computer is turned off or reset by a power failure while the hard disk drive is operating e The data may be lost and irrecoverable due to a computer virus infection e The data may be lost if the power is turned off while running a program e Sudden impact or movement to the computer while the hard disk drive is operating may cause files to be corrupted or bad sectors on the hard disk To prevent data loss due to damage to the hard disk drive please backup your data frequently Safety Precautions Chapter 1 Getting Started Using the Power Supply in an Airplane When Using the AC Power Plug Connect the power plug pins perpendicular into the center of the Since the power outlet type differs depending on the type of power outlet airplane connect the power
57. ied Body Registration Number and the Alert Symbol is on the system label The power output of the wireless device or devices that may be embedded in you notebook is well below the RF exposure limits as set by the European Commission through the R amp TTE directive The low band 5 15 5 35 GHz is for indoor use only i See 802 116 and 802 11g restrictions for specific countries or regions within countries under the heading European Economic Area Restrictions below Regulatory Compliance Statements EU R amp TTE Compliance Statements Cesky Czech Dansk Danish Deutsch German Eesti Estonian English Espanol Spanish Samsung timto prohlasuje ze tento Notebook PC je ve shod se z kladn mi po adavky a dalsimi prislusnymi ustanovenimi smernice 1999 5 ES Undertegnede Samsung erkl rer herved at f lgende udstyr Notebook PC overholder de v sentlige krav og vrige relevante krav i direktiv 1999 5 EF Hiermit erkl rt Samsung dass sich das Ger t Notebook PC in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschl gigen Bestimmungen der Richtlinie 1999 5 EG befindet K esolevaga kinnitab Samsung seadme Notebook PC vastavust direktiivi 1999 5 EU p hin uetele ja nimetatud direktiivist tulenevatele teistele asjakohastele s tetele Hereby Samsung declares that this Notebook PC is in compliance with the essential requirements and other relevant provisions of Dire
58. ill rise during normal operation particularly when AC Power is present Allowing sustained contact with exposed skin can cause discomfort or eventually a burn Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer To reduce the risk of fire use only No 26 AWG or larger telecommunications line cord Do not use this product in areas classified as hazardous Such areas include patient care areas of medical and dental facilities oxygen rich environments or industrial areas Battery Disposal Do not put rechargeable batteries or products powered by non removable rechargeable batteries in the garbage Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer Follow all local regulations when disposing of old batteries i THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Chapter 6 Appendix Laser Safety All systems equipped with CD or DVD drives comply with the appropriate safety standards including IEC 60825 1 The laser devices in these components are classified as Class 1 Laser Products under a US Department of Health and Human Services DHHS Radiation Performance Standard Should the unit ever need servicing contact an authorized service location i Laser Safety Note Use of controls or adjustments
59. it the TV corners and click Apply A Ifyou want to start your computer in DOS via a USB device set the Fast BIOS Mode item in the Advanced menu in the BIOS Setup to Disabled before using this feature Chapter 6 Appendix Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE Symbol Information Samsung Packaging Take Back Program Pro duct Specifications Glossary 106 108 110 123 124 125 127 Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment However to ensure safe use of this product it is important that the safety instructions marked on the product and in the documentation are followed Always follow these instructions to help guard against personal injury and damage to your system Setting Up your System Read and follow all instructions marked on the product and in the documentation before you operate your system Retain all safety and operating instructions for future use Do not use this product near water or a heat source such as a radiator Set up the system on a stable work surface The product should be operated only with the type of power source indicated on the rating label Ensure that the electrical outlet you are using to power your equipment is easily accessible in case of fire or short circ
60. ity Warning Do not operate a portable transmitter such as a wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use Regulatory Compliance Statements DR Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio frequency wireless devices because their signals could interfere with critical aircraft instruments Chapter 6 Appendix This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Unintentional Emitter per FCC Part 15 Other Wireless Devices Safety Notices for Other Devices in the Wireless Network Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network AR The Part 15 radio device operates on a non interference basis with other devices operating at this frequency Any changes or modification to said product not expressly approved by Intel could void the user s authority to operate this device DR This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a
61. k Select a wireless network to connect to TS Adjusting the You can adjust the volume or mute the Volume sound You can adjust the screen brightness x Wireless ill Network Brightness You can set the interval at which an Notice f App sends notices Turn off the computer or select Sleep mode and Restart Select a preferred language Change PC settings You can change more settings Using Apps An App refers to an application program hereafter referred to as an App In a larger sense it refers to all the software programs installed on the operating system Windows provides basic Apps for frequently performed tasks Starting Exiting an App Click on an App in the Start screen to activate it To exit the current app using the touchpad mouse Move the mouse pointer to the upper right edge of the application screen and select D Chapter 2 Using Windows Using Apps Displaying Currently Running App s 1 Move your mouse pointer to the top left corner of the screen to display the last run App 2 Then move your mouse pointer down to display a list of the currently running Apps in order 3 Click on an App in that list or drag it to the center of the screen Now you can check the selected App which is currently running Ze Right click over the App in the list and click Close to exit the App Using Apps Using split screens 1 Select the Apps in the Start screen 2 Touchp
62. k OK dinem i An application needs access to a protected key This dialog will automatically be canceled in 26 seconds kanm Using the TPM Security Device Optional nga Q You will be able to confirm that the color of the folder file name in the encrypted folder has been changed to green g Ce gt Libraries Documen ts gt Organize v al Open Share with e Burn New folder wr Favorites Documents library BE Desktop Includes 2 locations Opening an encrypted folder file 1 Double click an encrypted folder file 2 If the user authentication window appears enter the basic user password you entered when registering the user and click OK 3 The folder file opens Chapter 3 Decrypting an encrypted folder file 1 Right click over an encrypted folder file and select Decrypt from the pop up window 2 If the user authentication window appears enter the basic user password you entered when registering the user and click OK 3 The folder file is decrypted Using the virtual drive Personal Secure Drive PSD The virtual drive PSD is a virtual space to save and manage confidential data In the created virtual drive PSD you can create files and folders as with a normal drive e g drive C and you can use confidential data saved on another drive by copying the data to the virtual drive PSD Chapter 3 Using the TPM Security Device Optional gina 6
63. l mesmo de esta es do mesmo tipo e n o pode causar interfer ncia a sistemas operando em car ter prim rio Regulatory Compliance Statements European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformit Europ ene CE Marking which indicates compliance with the applicable Directives and European standards and amendments identified below This equipment also carries the Class 2 identifier The following information is only applicable to systems labeled with the CE mark European Directives CC This Information Technology Equipment has been tested and found to comply with the following European directives e EMC Directive 2004 108 EC e Low Voltage Directive 2006 95 EC e R amp TTE Directive 1999 5 EC Chapter 6 Appendix Q European Radio Approval Information for products fitted with EU approved radio devices This Product is a Notebook computer low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4GHz 5GHz band may be present embedded in your notebook system which is intended for home or office use This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices LEO Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark C with a Notif
64. layed depending on the OS version When Windows does not start boot up with the SYSTEM RECOVERY MEDIA and from there you can reinstall Windows 6 When the window asking for the installation type appears click Custom 1 Insert the SYSTEM RECOVERY MEDIA into the DVD drive and restart the computer s This screen may not be displayed depending on the OS version 2 If the Press any key to boot from CD or DVD message appears while booting press any key on the keyboard When a window appears asking for the location to install the operating system to select the partition of the disk drive and Press any key to boot from CD or DVD W then click the Next button Drive D includes an area to save the backup image used by 3 After a while the Options windows such as Language Time Samsung Recovery Solution Installing Windows to drive C is Keyboard etc appear Confirm the settings and click the recommended Next button Ze e Alf you click Drive Options Advanced you can delete 4 If the Select Windows Installation window appears click e format create or expand a partition Click on a function Install Now and proceed according to the instructions on the screen e When previous Windows installation files are in the Ze Depending on the OS version you may be prompted to selected partition a message appears informing you that select an operating system If you click the Next button the the files and folders will be mov
65. leshooting Search for Windows 8 or Windows 8 1 and look through the list of search results for the relevant issue Q7 A Chapter 5 Troubleshooting The screen overlaps the text characters or the font looks smaller If the font size is set too large or too small the screen may overlap the text resulting in poor readability On the desktop right click an empty area and click Personalize gt Display gt Resize all items and then click Apply Chapter 5 Q amp A Troubleshooting DIRE MWA CE Lyfe Sound Related Q1 The Desktop displayed on the TV after connecting via Q1 cannot hear any sound from the TV after connecting the HDMI port does not fit the screen via the HDMI port A Goto the Graphics Control Panel to adjust the screen A 1 Right click over the taskbar on the Desktop and click Play settings Device gt For Intel graphics cards 2 Change the option to Digital Audio HDMI HDMI device Right click over the Desktop and go to Graphics Properties deere REESE PHON ANG ENEK cin eres gt Display gt General Adjust the Horizontal Ratio and Vertical Ratio settings to fit your screen and click OK gt For AMD graphics cards You can configure your computer in the same way as existing Windows systems 1 Right click over the Desktop and select Graphics Properties gt Desktop and Display gt My Digital Flat Panel gt Expansion Options Digital Flat Panel Q1 2 Adjust the control bar to f
66. lick mouse function touchpad lg Chapter 3 Using the computer Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse 4 e Touch the touchpad with your fingers only Anything other than your fingers such as a ball point pen will not be recognized by the touchpad e If you touch the Touchpad or press the Touchpad buttons while booting up the Windows boot time may be extended Basic Touchpad Functions Moving the cursor on the screen Place your finger on the touchpad slightly and move your finger The mouse cursor will move accordingly Move your finger in the direction you wish to move the cursor Chapter 3 Using the computer Place a finger on the touchpad and click on an item once Click Function Alternatively press the left button once quickly and release it Or Double Click Function Put your finger on the touchpad and quickly tap twice with your finger on an item you want Alternatively press the left touchpad button twice quickly Chapter 3 To uch pad Using the computer Right Button Function The Gesture Function of the Touchpad Optional This corresponds to clicking the right mouse button Press the right touchpad button once The corresponding pop up 5 The Touchpad Gesture function may not be provided and menu appears the version of
67. ling go to call2recycle org or call 1 877 723 1297 Warning This product contains chemicals known to the state of California to cause cancer and reproductive toxicity Samsung Packaging Take Back Program In partnering with select recyclers Samsung offers packaging take back at no cost to you Simply call the following number for the locations nearest you CRT Processing LLC 877 278 0799 Kathy Severson Logistics contact Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect Or call 877 278 0799 Chapter 6 Appendix Product Specifications The system specifications may differ depending on the derived models For detailed system specifications refer to the product catalogue CPU Optional Main Memory Main Chipset Optional Storage Device Optional Graphics Optional Intel Dual Core i3 i15 i7 Processor Intel Pentium Celeron Processor AMD Dual Core Processor Memory type 1 SODIMM DDR3L Intel HM70 Intel HM75 Intel HM77 Intel NM70 AMD A68M SSD 7mmH SATA HDD 9 5mmH SATA HDD Intel HD Graphics Internal Intel HD Graphics 3000 Internal Intel HD Graphics 4000 Internal Intel HD Graphics Family Internal NVIDIA GeForce 710M Optimus AMD Radeon HD 7340 Internal AMD Radeon HD 7310 Internal AMD Radeon HD 8570M PowerXpress AMD Radeon HD 8750M PowerXpress Operating Environ
68. ment AC DC Rating Optional PC Rating Optional Chapter 6 Appendix Temperature 5 40 C for storage 10 35 C when operating Humidity 5 90 for storage 20 80 when operating Input 100 240VAC 50 60Hz Output 19VDC 2 1A 19VDC 3 16A 19VDC 4 74A 19VDC 6 32A 19VDC 2 1A 40W 19VDC 3 16A 60W 19VDC 4 74A 90W 19VDC 6 32A 120W i e Optional components may not be provided or different components may be provided depending on the computer model e The system specifications are subject to change without notice e The Storage device capacity of a computer in which Recovery is installed is represented as smaller than the product specification e The amount of memory that Windows can use may be smaller than the actual amount of memory available Product Specifications Registered Trademarks Samsung is a registered trademark of Samsung Co Ltd Intel Pentium Dual Core Quad Core are registered trademarks of the Intel Corporation AMD Dual Core Quad Core are registered trademarks of the AMD Corporation Microsoft MS DOS and Windows are registered trademarks of the Microsoft Corporation The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries All other product or company names mentioned herein are registered trademarks of their respective companies Cha
69. n cessaire pour une distance de moins de 300m Pour une distance sup rieure a 300m un enregistrement aupr s de I IBPT est requise Pour une utilisation publique a l ext rieur de b timents une licence de l IBPT est requise Pour les enregistrements et licences veuillez contacter I IBPT Pour les autres langues reportez vous aux modes d emploi correspondants France The low band 5 15 5 35 GHZ is for indoor use only Chapter 6 Appendix RF Exposure General Statement on RF energy Your Notebook or Tablet PC contains a transmitter and a receiver When it is ON it receives and transmits RF energy When you communicate with your Notebook or Tablet PC the system handling your connection controls the power level at which your Notebook or Tablet PC transmits Specific Absorption Rate SAR certification information This Notebook or Tablet PC embedded with wireless WAN or wireless LAN is included a radio transmitter and receiver It is designed not to exceed the limits for exposureto radio waves recommended by international guidelines These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons regardless of age and health The guidelines use a unit a measurement known as the Specific Absorption Rate or SAR The SAR limit for mobile devices is 2 0 W kg and the highest SAR value for this device when tested at the body
70. nnect the airplane power 3 gt input jack to the power outlet of the airplane Proper Posture During Computer Use Maintaining a proper posture during computer use is very important to prevent physical harm The following instructions are about maintaining a proper posture during computer use developed through human engineering Please read and follow them carefully when using the computer Otherwise the probability of repetitive strain injury RSI from repeated operations may increase and serious physical harm may be caused e The instructions in this manual have been prepared so that a they can be applied within the coverage of general users e If the user is not included in the coverage the recommendation is to be applied according to the user s needs Proper Posture Adjust the heights of desks and chairs appropriate to your height The heights are to be adjusted so that your arm forms a right angle when you place your hand over the keyboard while sitting down on a chair Adjust the height of the chair so that your heels are comfortably placed on the floor Chapter 1 Getting Started Do not use the computer while you are lying down but only while you are sitting down Do not use the computer on your lap If the computer temperature increases there is a danger of burning yourself Work while keeping your waist straight Use a chair with a comfortable back Keep the center of your leg weight no
71. nt Inspection recovery file Requires additional time Estimated time for recovery 3 minutes 2 minutes diagnostics time Partition settings When the partition is set all the data in all the drives will be deleted 0 Disk copy l Lo Factor eg Maintain user data E Run backup server E Help Recovering Backing up the Computer Optional Chapter 5 To copy the external storage disk When you replace a storage device such as the HDD SSD etc hereafter referred to as a hard disk built into your computer you can move your existing data to the new storage device easily and safely The new storage device must have sufficient capacity to save your existing data wy You need to purchase an external hard USB connector separately to connect the hard disk and your computer 1 You need to purchase an external hard USB connector separately to connect the hard disk and your computer 2 Start Recovery and click Disk copy f 3 Select an option in Disk recovery Point and click Disk copy Troubleshooting Disk copy A function for copying the disk from factory image or current settings 931 5GB Partition target disk Present F 519 0 GB 4 The data on the current hard disk is saved to the new hard disk If the data is completely saved open the hard disk cover at the bottom of your computer and replace the existing hard disk with the new one 52 If you canno
72. nter Current Password item enter the currently configured password and press lt Enter gt Leave the Enter New Password item field empty and press lt Enter gt Leave the Confirm New Password field empty and press lt Enter gt The password is deactivated For some models the password is only canceled if the lt Enter gt key is pressed in the Setup Notice window Changing the Boot Priority The computer is configured so that it boots from the HDD with priority by default This section will show you how to change the setting so that the computer boots from a USB device The screen image and terms may change depending on the model and the device driver version Connect a bootable USB device Immediately after the computer restarts press F2 several times Enter the BIOS Setup Select the Boot menu in the BIOS Setup Samsung BIOS Configuration 14 46 f EI dein ef Advanced Boot Device Priority gt Secure Boot Control Fast BIOS Mode PXE OPROM Aptio Setup Utility Copy C 2012 American Megatrends Inc Chapter 4 Settings and Upgrade Set the Boot Device Priority gt Boot Option 1 item on the right screen to USB device Samsung BIOS Configuration 14 46 wes Sf aa S Boot Option Priorities Aptio Setup Utility Copy C 2012 American Megatrends Inc Select Save and then Yes The computer will restart Now the boot priority has been changed so that the device will boot fr
73. ntry s power system USA ONLY e The appliance coupler must meet the mechanical configuration of an EN 60 320 IEC 320 Standard Sheet C7 or C5 connector for mating with appliance inlet on the computer Regulatory Compliance Statements Wireless Guidance If fitted with 2 4G band or 5G band Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4GHz 5GHz Band may be present embedded in your notebook system The following section is a general overview of considerations while operating a wireless device Additional limitations cautions and concerns for specific countries are listed in the specific country sections or country group sections The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label If the country you will be using the wireless device in is not listed please contact your local Radio Approval agency for requirements Wireless devices are closely regulated and use may not be allowed The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all international RF exposure limits as known at this time Because the wireless devices which may be embedded into your notebook emit less energy than is allowed in radio frequency safety standards and recommendations manufacturer believes these devices are safe using Regardless
74. o music e Take a break for 10 minutes or more after a 50 minute period when working for more than one hour e Donot use the computer in dark locations The illumination DEPTI e VOLUME level for computer use must be as bright as for reading a book Check your volume Illumination e Indirect illumination is recommended Use a curtain to prevent reflection on the LCD screen e Check if the volume is too loud before using headphones Itis not recommended using headphones for long periods of Operation Condition time l l e Donot use the computer in hot and humid locations e Any deviation from the equalizer default setting could cause hearing impairment e Use the computer within the allowed temperature and l humidity range specified in the User Guide e The default setting can be changed through software and driver updates without your intervention Please check the equalizer default setting before first usage To prevent possible hearing damage do not listen at high volume levels for long periods Overview e The pictures used for the cover and the main body in the User Manual are those of the representative model of each series Therefore the colors and appearance of the pictures may differ from the actual appearance of the product depending on the model e The items marked as optional may not be provided or may be provided in different locations N SAMSUNG N OF Ul P CO Camera oper
75. of the power levels care should be taken to minimize human contact during normal operation Some circumstances require restrictions on wireless devices Examples of common restrictions are listed on the next page Chapter 6 Appendix DR e Radio frequency wireless communication can interfere with equipment on commercial aircraft Current aviation regulations require wireless devices to be turned off while traveling in an airplane 802 11ABGN also known as wireless Ethernet or Wifi and Bluetooth communication devices are examples of devices that provide wireless communication In environments where the risk of interference to other devices or services is harmful or perceived as harmful the option to use a wireless device may be restricted or eliminated Airports Hospitals and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated When in environments where you are uncertain of the sanction to use wireless devices ask the applicable authority for authorization prior to use or turning on the wireless device Every country has different restrictions on the use of wireless devices Since your system is equipped with a wireless device when traveling between countries with your system check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country If your system came
76. om the USB device with priority Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power A Lithium lon smart battery is supplied with this computer e Carefully read and follow the precautions printed on the e battery before using the battery e Before using your computer for the first time after purchasing it charge the battery completely e The images used for the illustration are of a representative model therefore the images may differ from the the actual product Chapter 4 Settings and Upgrade Installing Removing the Battery 1 Shutdown the system close the LCD panel and place the computer upside down on a flat surface 2 Pull the two battery latches outwards cf then remove the battery da TM 3 To install the battery again slide the battery into the system The battery latches move inwards and fix the battery automatically Z Check if the battery latch has been moved inwards Battery Charging the Battery 1 Attach the battery and connect the AC adapter to the DC in jack of the computer The battery will then start charging 2 If you start charging the computer while it is turned off the Power Button LED blinks for about 5 seconds LED If you start charging the computer while it is turned on the battery icon ij in the system tray of the Taskbar changes to the charging icon fj Chapt
77. ommand Prompt window e Simultaneous output to all 3 LCD CRT HDMI is not supported Connecting an External Display Device euni Q In the Select a program to customize S field click the Add button to register the software Using NVIDIA graphics more efficiently 3 optional NVIDIA Optimus is a function that enables automatic selection and usage of the internal or external graphics chipsets depending on the currently running software Z You can register executable files EXE only 4 In the Select the preferred graphics processor for this program O field select High performance NVIDIA processor and click the Apply button For example the internal graphics chipset can be used for Internet surfing or word processing to minimize battery power consumption and the high performance external graphics graphic chipset can be used for gaming or video processing to deliver a TE n i 3D Settings Help more realistic experience gt The NVIDIA Optimus model supports Windows 8 only a TTT e This function is only available in models that support the ees NVIDIA Optimus technology Ceme EDO n the preferred SE Registering programs to be executed by the external bes graphics chipset Use global setting Application contro e f e Use global setting Application controlled Use global setting Off Use global setting Off To run a program using the external graphics gr
78. on unnecessary folders and files may remain on the hard disk drives after the installation e g CA Windows old etc Upgrade Select this option to Upgrade Windows while maintaining current files configurations and programs Although you therefore do not need to reinstall the device drivers and programs some programs may not work properly after the upgrade Chapter 5 Troubleshooting 5 When a window appears asking for the location to install the operating system to select a disk drive partition and click the Next button Drive D includes an area to save the backup image used by Samsung Recovery Solution Installing Windows to drive C is recommended 5 When previous Windows installation files are in the selected partition a message appears informing you that the files and folders will be moved to the Windows old folder Click the OK button 6 The Windows installation continues The computer will restart 3 times during the installation If the Press any key to boot from CD or DVD message appears after a restart do not press any button 7 Register a user according to the instructions on the Windows screen Q When the registration is complete the Windows Desktop screen appears For a smooth computer operation installing the necessary software installation is recommended Reinstalling Windows Optional ainsi Troubleshooting Reinstalling when Windows does not start 5 This screen may not be disp
79. onics only It may damage the product or result in fire Never disassemble or repair the product by yourself If the product is modified disassembled or repaired by the user the warranty is expired a service fee will be charged and there is a danger of an accident Be sure to use an authorized Samsung Electronics service center Chapter 1 Getting Started To connect a device that is not manufactured or authorized by Samsung Electronics inquire at your service center before connecting the device There is a danger of damaging the product Security and Movement Related When moving the product turn the power off and separate all connected cables first The product might be damaged or users may trip over the cables For long periods of not using the notebook computer discharge the battery and separate the battery from the computer for external amp removable battery type The battery will be preserved at its best condition Do not operate or watch the computer while driving a vehicle There is a danger of a traffic accident Please concentrate on driving Safety Precautions Meah A Caution Causes that may damage the data of a hard disk drive and the hard disk drive itself Failure to follow instructions marked with this symbol may cause slight injury or damage to the product Be careful when closing the LCD panel Closing the LCD panel with any object such as a pen placed on the dev
80. ons must be published in all end user documentation provided with the system or product incorporating the wireless product H Due to the fact that the frequencies used by 802 11b 802 11g wireless LAN devices may not yet be harmonized in all countries 802 11b 802 11g products are designed for use only in specific countries or regions and are not allowed to be operated in countries or regions other than those of designated use As a user of these products you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such Regulatory Compliance Statements The European variant is intended for use throughout the European Economic Area However authorization for use is further restricted in particular countries or regions within countries as follows General European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power EIRP and the frequency range 2400 2483 5 MHz The low band 5 15 5 35 GHz is for indoor use only Belgium Dans le cas d une utilisation priv e a l ext rieur d un b timent au dessus d un espace public aucun enregistrement n est
81. or Users should additionally purchase the necessary connection movie cables The computer provides an analog monitor port D SUB and a digital video audio port HDMI The visual quality is sharper when a display device is connected through the HDMI port rather than the analog monitor port D SUB port Therefore when multiple ports are supported connect a display device to a port that provides the better visual quality D SUB Cable HDMI Cable Before you start check the port and cable of the external display device and then connect the display device to the computer Chapter 3 Connecting an External Display Device Using the computer Q Connecting to the monitor port Optional 3 Select Charms menu gt Devices mi Projector gt Second l Screen Select a desired monitor mode You can experience a wider screen by connecting the computer to a monitor TV or projector with a monitor port You can give better presentations by connecting the computer to PC Screen only a projector Cal The contents are only displayed on the PC monitor current device Connect the D SUB port of the computer and the port of the Duplicate monitor or TV with the monitor cable 15 pin N H The contents of the current device are displayed External TV on the external device as well Monitor Extend The screen of the current device is expanded to the external device N d Second screen Only T
82. or performance of procedures other than those specified in this manual may result in hazardous radiation exposure To prevent exposure to laser beams do not try to open the enclosure of a CD or DVD drive e Class 1M laser radiation when operating part is open Do not view directly with optical instruments e Class 3B invisible laser radiation when open Avoid exposure to the beam Replacement Parts and Accessories Connect and Disconnect the AC adapter The socket outlet shall be installed near the equipment and shall be easily accessible Do not unplug the power cord by pulling the cable only Power Cord Requirements The power cord set wall plug cable and AC adapter plug you received with your computer meets the requirements for use in the country where you purchased your equipment Power cord sets for use in other countries must meet the requirements of the country where you use the computer For more information on power cord set requirements contact your authorized dealer reseller or service provider Chapter 6 Appendix The requirements listed below are applicable to all countries General Requirements e All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used e The power cord set must have a minimum current capacity of 7 Aand anominal voltage rating of 125 or 250 volts AC as required by each cou
83. pacity calculation E g For a 80GB HDD Windows represents the capacity as 74 5GB 80x1 000x1 000x1 000 byte 1 024x1 024x1 024 byte 74 505GB In addition the capacity representation in Windows may be even smaller because some programs such as Recovery may reside in a hidden area of the HDD About Memory Capacity Representation The memory capacity reported in Windows is less than the actual capacity of memory This is because BIOS or a video adapter uses a portion of memory or claims it for further use E g For 1GB 1 024MB memory installed Windows may report the capacity as 1 022MB or less Safety Precautions For your security and to prevent damage please read the following safety instructions carefully Since this is commonly applied to Samsung computers some pictures may differ from actual products A Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality Installation Related Do not install the product in places exposed to humidity such as bathrooms There is a danger of electric shock Use the product within the operating conditions specified in the Manufacturers User Guide Keep the plastic bags out of the reach of children There is a danger of suffocation Keep a distance of 15cm or more between the computer and the wall and do not place any objects between them This may increase the internal temperature of the computer and ma
84. pter 6 Appendix ENERGY STAR Partner Fc Asan ENERGY STAR Partner SAMSUNG has Or AC determined that this product meets the ENERGY STAR guidelines for energy efficiency e The ENERGY STAR Program has reduced greenhouse gas emissions and saved energy through voluntary labeling e Power management setting of this product have been enabled by default and have various timing settings from 1 minute to 5 hours e The product can wake with a button press on the chassis from sleep mode HDMI Hami HIGH DEFINITION MULTIMEDIA INTERFACE Glossary Chapter 6 Appendix The Glossary lists the terminologies used in this User Guide For terminologies other than these look in Windows Help Backup A way to save the current data to restore it later if necessary A backup is a way to restore computer data when the data or computer is damaged Chargeable USB This program enables supplying power to a specific USB port when the system is in power saving mode hibernation mode or off Client This refers to a computer that uses a shared network resource provided by a server DDR SDRAM Double Data Rate Synchronous Dynamic Random Access Memory DRAM is a memory type whose cells consist of a capacitor and transistor manufactured at a low price SDRAM is a memory type whose performance has been improved by synchronizing the clock with the external CPU clock DDR SDRAM is a memory type whose performance has been improve
85. puter exits standby hibernate mode restoring the network takes about 3 seconds When the network is restored it operates at 100Mbps 1Gbps When system is running on battery some time it may take a few second extra after inserting LAN cable to be able to connect to internet This symptom happen as a result of power saving feature to reduce battery consumption When system is running on battery the Wired LAN speed is decreased automatically to reduce battery consumption In such case a 1Gbps 100Mbps LAN would function at 100Mbps 10Mbps speed Chapter 3 Wireless Network Optional ieee Q A wireless network Wireless LAN environment is a network environment that enables communication between multiple A computers at home or a small size office through wireless LAN devices The screen figures and terms may differ depending on the model e Depending on the program version some functions may not be provided or different functions may be provided e The descriptions below are for computer models with a Wireless LAN card or device A Wireless LAN device is optional The pictures in this manual may differ from the actual product depending on your wireless LAN device model Ze What is an Access Point AP An AP is a network device that bridges wired and wireless LANs and corresponds to a wireless hub in a wired network You can connect multiple wireless LAN installed computers to an AP Wireless Network
86. r finger on the right edge of the touch pad and drag your finger toward the center the Charms menu appears Charms Menu Activating Function Last Run Window Opening Function Place your finger on the left edge of the touch pad and drag your finger towards the center to activate a previously operating program from among the currently running programs Using the computer Touchpad isnt Touchpad On Off Function Locking with shortcut keys If you want to use the mouse only without using the touchpad you can turn the touchpad off To lock the touchpad function press the keys Ze You can set the touchpad and touchpad button settings in the tabs that appear when clicking Charms menu on the Desktop gt Settings gt Control Panel gt Hardware and Sound gt Touchpad CD Drive ODD Optional Chapter 3 Using the computer If your computer does not have a CD drive you can purchase an 2 When the CD tray opens insert a CD or DVD and push the external CD drive tray in until it clicks H e Do not insert a cracked or scratched CD Otherwise the CD may break and damage the optical disk drive when the CD rotates at a high speed e When you clean a CD or DVD title wipe with a soft cloth from inside to outside e Insert a Mini CD into the center of the CD drive e The figures used for the description are of a representative model Therefore the figures may differ from the real ones e U
87. r preference Ze Cautions e Do not take a photo of others without their permission e Do not take photos or make video recording in areas prohibiting those actions e Do not take photos or make video recording that may infringe on privacy or confidentiality Using Apps Using the Windows Store If you run the App Store in the Start screen the Apps in the Windows Store are displayed However a Microsoft account is required to purchase App s in the Windows Store Continue after registering your Microsoft Account in the Charms Store Spotlight Games Ze Samsung cannot solve errors occuring with other apps installed from the Windows Store Contact customer support for the app directly Chapter 2 Using Windows A Microsoft Account allows you to synchronize your settings with other device s running Windows online allowing you to share file s or settings Configuring your Microsoft Account You should register a Microsoft Account to download or purchase App s from the Store 1 Run the Charms and click Settings gt Change PC Settings Or select PC settings on the Start screen 2 Select Your account gt Connect to a Microsoft account Manual Local Account Sign in with a Microsoft account to easily get your online email photos files and settings like browser history and favorites on all your devices Connect to a Microsoft ac Account picture Browse Create an account pi
88. re to follow instructions marked with this symbol may cause personal injury and even fatality __ Before upgrading the computer be sure E to shutdown the computer first and then separate all connected cables If the notebook computer has an external type removable battery separate the battery too Failure to do so may cause electric shock Chapter 1 Getting Started Security and Movement Related location e g airplane hospital etc when using a wireless communication device wireless LAN Bluetooth etc Follow the instructions for the relevant i Avoid exposing a drive to magnetic fields s Security devices with magnetic fields in clude airport walk through devices and se curity wands The airport security devices that check car ry on luggage such as conveyor belts use x rays instead of magnetism and will not damage a drive When carrying the notebook computer with other items such as the adapter mouse books etc take care not to press _ anything against the notebook computer If a heavy object is pressed against the notebook computer a white spot or stain may appear on the LCD Therefore take care not to apply any pressure to the notebook In this case place the notebook computer in a separate compartment away from other objects Safety Precautions A Caution Failure to follow instructions marked with this symbol may cause slight injury or damag
89. residential installation This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with the instructions it may cause harmful interference If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Regulatory Compliance Statements If necessary the user should consult the dealer or an experienced radio television technician for additional suggestions The user may find the following booklet helpful Something About Interference This is available at FCC local regional offices Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company The correction will be the responsibility of the user Use only shielded data cables with this system Intentional emitter per FCC Part 15 If fitted with 2 4G band or 5G band Low power Radio LAN
90. roduct or battery in a hot location such as a sauna inside a vehicle exposed to the heat and so on There is a danger of an explosion or fire Take care not to allow metal objects such as a key or clip to touch the battery terminal metal parts If a metal object touches the battery terminals it may cause excessive current flow and it may damage the battery or result in a fire If liquid leaks out of the product or battery or there is a funny smell coming from the product or battery remove the the product or battery the computer and contact a service center There is a danger of an explosion or fire To use the computer safely replace a dead battery with a new authorized battery computer before cleaning it If your notebook is an external amp removable battery type remove the external battery There is a danger of electric shock or damage to the product Do not connect a phone line connected toa digital phone to the modem There is a danger of a electric shock fire or damage to the product Do not place any container filled with water or chemicals over or near the computer If water or chemicals enter the computer this may cause fire or electric shock If the computer is broken or dropped disconnect the power cord and contacta service center for a safety check If the notebook computer has an external type removable battery separate the battery also Using a broken computer may
91. s This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS 2 The data transmission specifications are one of the interface standards used to connect a computer to peripheral devices These specifications include USB 1 0 1 1 2 0 and 3 0 It is appropriate to support peripheral devices that require high data rates such as an AV device secondary HDD or CD RW The higher the version e g USB 3 0 the higher the data rate provided Windows Media Player A multimedia program included with Windows Using this program you can play a media file create an audio CD listen to a radio broadcast search and manage media files and copy files to a portable device etc
92. s and folders item select the Show hidden files folders and drives option and click OK LP A W N Locate and delete the Infineon folder under the File Explorer gt Drive C gt ProgramData folder Li I Now the TPM Program has been deleted To use the TPM function please repeat the procedures of the TPM chip initialization process Samsung Software Update ee weie Q SW Update is a software program that searches for Samsung 2 The SW Update program runs software programs and drivers installed when you purchased the Select the items that you want to update before proceeding computer and helps you update any drivers or programs with the update process Ze e You can check updatable files before performing the update only when you are connected to the internet Software List e e SW Update does not provide any updates for device drivers Software es or software programs installed separately by the user Update e Depending on the model the application may not be provided 1 Click the bottom left icon on the Start screen and click SW Update T it T Le 5 Chapter 3 Diagnosing the Computer Status and Troubleshooting Tee ee Q The Support Center program which is Samsung s Computers 2 Support Center is activated and starts diagnosing your troubleshooting guide supports diagnosing the system and has a computer FAQ for frequently occurring problem s After
93. s not start e Some pictures may differ from actual product e These descriptions may differ depending on the operating system e Reinstalling Windows may delete data files and programs saved on the hard disk drive e Make sure to backup all important data Samsung Electronics shall not be held liable for any loss of data Chapter 5 Troubleshooting Reinstalling in Windows 1 Insert the SYSTEM RECOVERY MEDIA into the DVD drive 2 If the Select Windows Installation window appears click Install Now When the Select Update window appears click on the relevant item e If you select Go online to get the latest updates for installation in the Select Update window the latest updates are installed and Step 4 follows At this time the computer must be connected to the Internet 3 If the User Agreement screen appears select I accept the license terms and then click Next y This screen may not be displayed depending on the OS version Reinstalling Windows Optional 4 The following window appears select an installation option Ss If you click Custom the procedures from Step 5 continue sequentially If you click Upgrade the procedures from Step 6 continue sequentially Ze e This screen may not be displayed depending on the OS version Custom Select this option to Reinstall Windows You have to reinstall all necessary device drivers and programs after the Custom installation In additi
94. service center There is a danger of electric shock or fire hazard Do not use a damaged or loose main plug or power cord or power outlet There is a danger of electric shock or fire hazard Plug the power cord firmly into the power outlet and AC adapter Failure to do so may cause fire hazard Do not unplug the power cord by pulling the cable only If the cord is damaged it may cause electric shock Do not bend the power cord excessively or do not place a heavy object over the power cord It is especially important to keep the power cord out of reach of infants and pets If the cord is damaged it may cause electric shock or fire Safety Precautions A Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality Connect the power cord to an outlet or multiple power plug extended cable with a ground terminal Failure to do so may result in electric shock When the power supply is ungrounded the current may leak resulting in electric shock liquid dust metal powders pencil leads etc enter the power input jack AC adapter WW id or the computer disconnect the power cord and contact the service center If the notebook computer has an external type removable battery separate the battery also Damage to the device within the computer may cause electric shock or fire hazard Keep the power cord or outlet clean so that they are not
95. sing a CD that is not in the shape of a circle is not recommended Using CD Drive Press the Eject button of the optical disk drive at the side of 9 the computer The CD drive status indicator is turned on Push the CD tray inward until it clicks e ACD drive s reading and writing speed may differ j depending on the condition and type of the media e To eject a CD when the CD drive does not work or the computer is off place the end of a paper clip into the Emergency Hole until the CD tray is ejected Eject Button Emergency Hole o Chapter 3 Multi Card Slot Using the pine Using the multi card slot you can read and write data on various types of memory cards When you insert a memory card make sure to insert the memory card in the correct direction Pushing an incorrectly inserted memory card may damage the card itself or the slot e e You can use memory cards as a removable disk and conveniently exchange data with digital devices such as a digital camera etc E le SD Card e Separately purchase memory cards of your desired xample al capacity l l l Memory Card Naming e The color of the multi card slot may differ from the picture l E The following table shows the full names of memory cards in this manual Gg l S for each abbreviation e Before using the slot remove the dummy card from inside the slot Only for models providing dummy cards Abbreviation Memory Card s Name e Inser
96. smaller than the actual capacity because Recovery uses a hidden area of about 5 20GB of the HDD to save the recovery image and that hidden area is not counted towards the total size available to Windows The size of Recovery varies by models because of the different size of applied programs Q3 What is a recovery image A Q4 You can restore PC settings using the Windows provided PC This refers to the computer status including operating system specific driver s software s etc which is converted to a data image It is required to recover your computer and is embedded in the computer s hard disk However this is not provided for storage devices where the capacity is less than 64 GB due to the small capacity How can I restore a computer that does not have the Recovery program Recovery feature Refer to the Restore Functionality item in the Help section for more details Q amp A Windows Related Q1 cannot find the computer s Shutdown button A Touchpad mouse At the upper right corner of the Start screen select Power gt Shut down Click Charms gt Settings gt Power gt Shut down Right click the Start button and then click Shut down or sign out gt Shut down Q2 The App disappeared in the Start screen A Touchpad mouse 1 Click the bottom left icon on the Start screen to display a tile of all apps installed on the computer 2 Right click over the corresponding App to
97. t on the chair but on your feet when you are sitting on a chair To use the computer while talking over the telephone use a headset Using the computer with the phone on your shoulder is bad for posture Keep frequently used items within a comfortable work range where you can reach them with your hands Proper Posture During Computer Use Selanne Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least Keep your arm at a right angle as shown by the figure 50cm e Keep the line from your elbow to your hand straight e Adjust the height of the monitor and the LCD screen so that its ae Do not place your palm over the keyboard while typing top height is equal to or lower than your eyes e Donot hold the mouse with excessive force e Avoid setting the monitor and LCD excessively bright l e Do not press the keyboard touchpad or mouse with excessive e Keep the monitor and LCD screen clean force e If you wear glasses clean them before using the computer Itis recommended to connect an external keyboard and e When entering contents printed on a paper into the computer mouse when using the computer for long periods of time use a Static paper holder so that the height of the paper is almost equal to that of the monitor Chapter 1 Proper Posture During Computer Use Getting Started Volume Control Headphones and Speakers Use Time Break Time Check your volume first to listen t
98. t open the cover at the bottom of the computer SS contact the Samsung Service Center to request assistance In this case you may be charged for the relevant service Your computer is now equipped with a new hard disk The new hard disk now contains all data from the old hard disk with the same settings Recovering Backing up the Computer Optional Export Disk Image Function If you frequently recover your computer to the default factory settings you can conveniently recover your computer after exporting the default factory status disk image to an external storage device 1 Connect the external storage device and then select a drive to save to 2 Click Run 3 Perform the process by following the instructions to completely save the default factory status disk image to the external storage device Now disconnect the saved external storage device and store it separately Ze To restore the computer settings to the factory default settings connect the external storage device that contains the disk image of your computer and repeat the steps mentioned in the Recovering section Chapter 5 Troubleshooting Recovering Backing up the Computer Optional Chapter 5 Q Troubleshooting 3 Follow the onscreen instructions to proceed with the recovery process If a problem occurs with your computer the recovery program If the recovery is complete you can use your computer allows you to restore your
99. t the memory card into the multi card slot in the SD Secure Digital direction printed on the slot mini SD mini Secure Digital e For memory cards marked with 7 you must insert them micro SD micro Secure Digital into a specified adapter and then insert the adapter into SDHC Secure Digital High Capacity the multi card slot Inserting such memory cards directly into the multi card meee ee SS e High SR slot without using a specified adapter may damage the micro SDHC micro Secure Digital High Capacity computer SDXC Secure Digital eXtended Capacity e The computer may not recognize the device depending on micro SDXC micro Secure Digital eXtended Capacity the status of the specified adapter The data transfer rate may diff er depending on the specification of the memory card o Chapter 3 Multi Card Slot Using the see Q 1 Insert a memory card into the multi card slot in the correct To remove a memory card direction Remove the card while holding the tip of the card The following message appears on the top right Alternatively push the tip of the card in and then remove it once it Click to open the folder and click View Files ES Removable Disk F Tap to choose what happens with memory cards 5 If a message appears to notify you of any problem click the corresponding window gt Continue without Scanning You can perform the following process described in No 3 5 File Explorer runs on the desktop You can sav
100. tal Display There are Passive Matrix and Active Matrix LCD types This computer uses the Active Matrix type LCD called a TFT LCD Since an LCD is implemented by transistors instead of a cathode ray tube unlike a CRT its size can be slim And because it does not blink it reduces eye strain Glossary Network A group of computers and devices such as printers and scanners connected by a communications link A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links The biggest network is the Internet a worldwide network Network Administrator A user who plans configures and manages network operations Sometimes a network administrator is called a system administrator Notification Area This refers to the right area of the Taskbar including program icons such as the volume control the power options and the time Partition This refers to the act or practice of dividing the storage space of a hard disk drive into separate data areas known as partitions If a 100GB hard disk drive is partitioned into 2 x 50GB partitions the hard disk drive can be used as if there are 2 hard disk drives Chapter 6 Appendix Protocol A protocol is a set of rules used by computers to communicate with each other across a network A protocol is a convention or standard that controls or enables the connection communication and data transfer bet
101. tems some devices and software referred to in the User Guide may not be provided and or changed by upgrade Note that the computer environment referred in the User Guide may not be the same as your own environment The pictures used for the cover and the main body in the User Manual are those of the representative model of each series and may differ from the actual appearance of the product This manual provides details of both mouse operations and gestures to manipulate the menus Gestures are enabled only on touch sensitive models This manual has been written for the Windows 8 1 operating system The descriptions and figures may differ depending on the installed operating system The User guide supplied with this computer may vary depending on your model Chapter 1 Getting Started O Safety Precaution Notations Icon A A Notation Warning Caution Description Failure to follow instructions marked with this symbol may cause personal injury and or fatality Failure to follow instructions marked with this symbol may cause slight injury to yourself or damage your property Text Notations Icon Notation Caution Note Description Content included in this section includes information required about the function Content included in this section includes helpful information to use the function Before You Start Copyright 2014 Samsung Electronics Co Ltd Samsung Ele
102. teries according to the manufacturers instructions If the CMOS battery requires replacement insure that a qualified technician performs the task When the computer is turned off a small amount of electrical current still flows through the computer To avoid electrical shock always unplug all power cables remove the battery and modem cables from the wall outlets before cleaning the system Unplug the system from the wall outlet and refer servicing to qualified personnel if The power cord or plug is damaged Liquid has been spilled into the system The system does not operate properly when the operating instructions are followed The system was dropped or the casing is damaged The system performance changes Chapter 6 Appendix The Instruction On Safety Operation of NotePC U When installing and operating devices please refer to safety requirements in the user manual Devices can be used only with the equipment specified in the technical specifications of the devices If any smell of burning or smoke is detected from the computer the unit should be switched off and battery removed The unit should be checked by a qualified technician before reuse Service and repair of devices should be carried out by authorized service centers Do not allow your portable computer to operate with the base resting directly on exposed skin for extended periods of time The surface temperature of the base w
103. tery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Discard used batteries according to the Manufacturer s instruction Attention Danger d explosion si les piles sont mal palc es Remplacez les piles usag es uniquement par des piles de type identique ou quivalent recommandees par is fabriquant Otez les piles usag es selon les instructions du fabriquant WEEE Symbol Information Correct disposal of this product Waste Electrical amp Electronic Equipment Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial
104. tom right corner of the screen 2 Click Settings Zr gt Power d gt Shut down gt If you want to power off your computer when you are logged 2 Select Shut down out unlock the screen and click Power l gt Shut down Turning the Computer On and Off Unlocking the screen To unlock the lock screen do one of the following e Touchpad mouse Click the lock screen e Keyboard Press any key 10 00 Wednesday January 1 will If the account has a password enter the password to log in after unlocking the screen Chapter 1 Getting Started Chapter 2 Using Windows What is Microsoft Windows Screen At a Glance Using the Charms Using Apps Windows Hot Key Function 31 32 35 37 AT What is Microsoft Windows Microsoft Windows is an operating system that is required for operating a computer To use your computer optimally you need to know how to use it properly To learn how to use the operating system check out Windows Help and Support and Help Tips Ze e The screen may appear somewhat different depending on z the model and the operating system e This manual is designed for Windows 8 1 and may differ in content depending on the OS version e The desktop image shown differs depending on the product model and the OS version DIF EM Tare Help To open the Help do the following Keyboard Press the F1 key Touchpad mouse Place the mouse pointer over the top right
105. type devices radio frequency RF wireless communication devices operating in the 2 4GHzZ 5GHz Band may be present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label Chapter 6 Appendix This device is restricted to indoor use due to its operation in the 5 15 to 5 25 GHz frequency range FCC requires this product to be used indoors for the frequency range 5 15 to 5 25 GHz to reduce the potential for harmful interference to co channel Mobile Satellite systems High power radars are allocated as primary users of the 5 25 to 5 35 GHz and 5 65 to 5 85 GHz bands These radar stations can cause interference with and or damage this device Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device DR Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service Regulatory Compliance Statements Health and safety information Exposure to Radio Frequency RF
106. u tilskipun 1999 5 EC Samsung erkl rer herved at utstyret Notebook PC er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999 5 EF Bu belge ile Samsung bu Notebook PC nin 1999 5 EC Y netmeli inin temel gerekliliklerine ve ilgili h k mlerine uygun oldu unu beyan eder Regulatory Compliance Statements To view the EU Declaration of Conformity for this product in English only go to http www samsung com uk support main supportMain do or http www samsung com uk support then search the model number of the product If the Declaration of Conformity for the model you are interested in is not available on our web site please contact your distributor or below address doc eu samsung com Manufacturer Information Samsung Electronics Co Ltd 129 Samsung Ro Yeongtong Gu Suwon City Gyeonggi Do 443 742 Korea Samsung Electronics Suzhou Computer Co Ltd No 198 Fangzhou Road Suzhou Industrial Park Jiangsu Province 215021 China Tel 86 0512 6253 8988 Samsung Electronics Vietnam Co Ltd Yen Phong 1 I P Yen Trung Commune Yen Phong Dist Bac Ninh Province Vietnam For the web or the phone number of Samsung Service Centre see the Warranty or contact the retailer where you purchased your product Chapter 6 Appendix European Economic Area Restrictions Local Restriction of 802 11b 802 11g Radio Usage Note to integrator The following statements on local restricti
107. uit Chapter 6 Appendix If your computer has a voltage selector switch make sure that the switch is in the proper position for your area Openings in the computer case are provided for ventilation Do not block or cover these openings Make sure you provide adequate space at least 6 inches 15 cm around the system for ventilation when you set up your work area Never insert objects of any kind into the computer ventilation openings Ensure that the fan vents on the bottom of the casing are clear at all times Do not place the computer on a soft surface doing so will block the bottom vents If you use an extension cord with this system make sure that the total power rating on the products plugged into the extension cord does not exceed the extension cord power rating For Notebooks with glossy display bezels the user should consider the placement of the Notebook as the bezel may cause disturbing reflections from surrounding light and bright surfaces Ver 3 4 Important Safety Information Care During Use Do not walk on the power cord or allow anything to rest on it Do not spill anything on the system The best way to avoid spills is to not eat or drink near your system Some products have a replaceable CMOS battery on the system board There is a danger of explosion if the CMOS battery is replaced incorrectly Replace the battery with the same or equivalent type recommended by the manufacturer Dispose of bat
108. ult settings if the computer fails to boot up or if you encounter a 5 If you set the User Data Maintenance to ON the computer is serious problem with the computer restored while maintaining the current user data 1 If Windows does not start Tu r n O n t h e CO m p u te r d n d p re SS t h e F4 key Seve ra ti H es to Gees recovers the computer to the factory settings or recovers Windows to previously saved settings enter the Recovery screen All contents of C drive will be deleted Select recovery point Recover to selected point In the Start screen after the computer boots up Click the bottom left icon on the Start screen and click Recovery Date 08 11 2012 S 2 If the program is running for the first time you need to agree BE GER to the User Ag reement D Disk copy l When the partition is set all the data in all the drives will be deleted Le Factory image J Maintain user data E Run backup server 4 Recover is performed based on the screen instructions If the recover is completed you can use your computer normally Troubleshooting Recovering Backing up the Computer Optional Chapter 5 Recovering after a Backup 2 Click Backup in the Recovery Home screen Select the drive to save and click Backup You can recover your computer after you have backed up your computer to a separate drive or external storage device l
109. used for the description are of a representative SoHE You are currently not connected to any networks model Therefore the figures may differ from the real ones SS Change your networking settings MGW Set up a new connection or network Set up a broadband dial up or VPN connection or set up a router or access point LG Troubleshoot problems Diagnose and repair network problems or get troubleshooting information Connecting to the Wired LAN 3 Select Ethenet and click the right button of the touch pad 1 Connect the LAN cable to the wired LAN port and select Properties yvetwork Connections Jetwork Ci g s Jl ech 4 Network and Internet Network Connections gt vele Organize zs mm CS Not connected A Bluetooth Network Connection x D Bluetooth Device Personal Area Not connected fiii Intel R Centrino R Advanced N 6 Wi Wi Fi x 5 The LAN Device name may differ depending on your Computere Network Device o Chapter 3 Wired Network Using the shee Select Internet Protocol Version 4 TCP IPv4 from the list 5 Configure the IP settings of Network Components and click Properties When using DHCP select Obtain an IP address automatically To use a static IP address select Use the following IP address and set the IP address manually Networking sharing Connect using me Realtek PCle GBE Family Controller General En hes You can get IP settin
110. ve has been created you have to delete the virtual drive before deleting the existing authentication information To register a user again you need to delete the existing saved onthe TPM chip authentication information saved on the TPM chip and then clear the TPM chip Bi j 1 Right click over i gt 4 and click Personal Secure Drive gt Register the user in the following order Create Manage 1 Delete the virtual drive Click Next Enter the password that you entered when registering the 2 Delete the existing authentication information saved on the TPM program and click Next TPM chip Select Delete selected PSD and click Next Select I want to permanently delete my Personal Secure Drive without saving an unencrypted copy of its contents and click Next V A W N Click Next and then Finish Li 7 Now the virtual drive has been deleted Using the TPM Security Device Optional aetna sume 6 Deleting the existing authentication information saved on the TPM chip 1 On the desktop select the Charms menu gt Settings gt Control Panel gt Programs gt Uninstall a program gt Infineon TPM Professional Package Then click Uninstall If the message window appears click Yes to remove the program If the Infineon Security Platform message appears click No Click the File Explorer icon on the taskbar at the bottom of the desktop In View gt Options gt Folder Options gt View gt Hidden file
111. was 0 1 W kg As SAR is measured utilizing the devices highest transmitting power the actual SAR of this device while operating is typically below that indicated above This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network The World Health Organization has stated that present scientific Regulatory Compliance Statements information does not indicate the need for any special precautions for the use of mobile devices The note that if you want to reduce your exposure then you can do so by limiting the length of calls to keep the mobile devices away from the head and body Limiting exposure to radio frequency RF fields For individuals concerned about limiting their exposure to RF fields the World Health Organisation WHO provides the following advice Precautionary measures Present scientific information does not indicate the need for any special indicate the need for any special precautions for the use of the Notebook PC If individuals are concerned they might choose to limit their own or their children s RF exposure by limiting the length of connections or using hands free devices to keep your Notebook PC away from the head and body Further information on this subject can be obtained from the WHO home page http www who int peh emf WHO Fact sheet 193 June 2000 Chapter 6 Appendix RTC CAUTION CAUTION Danger of explosion if bat
112. ween computing endpoints It defines the data transmission procedures and the transmission medium for more efficient network functions Quick Launch This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display the Windows Desktop with one click You can add any icon to the quick launch area of the Taskbar and launch frequently used program by clicking that icon SDHC Secure Digital High Capacity card This is the extension of the SD card that supports over 2GB bytes Server In general a server refers to a computer that provides shared resources for network users Share This refers to setting a resource of a computer such as a folder or printer so that other users can also use it Glossary Shared Folder A folder that can be used by other users on the network Sleep Mode A power mode that enables computers to save power consumption when they are not being used When a computer is in Sleep Mode the data on the computer memory is not saved to the hard disk If the power is turned off the data in memory will be lost System File System Files refer to files that are read and used by the Windows operating system In general system files must not be deleted or moved TCP IPv4 This is a 4 byte 32 bit address system separated into each byte 8 bits by a dot and each byte is represented as a decimal number Chapter 6 Appendix USB Universal Serial Bu
113. y cause an explosion or fire from damage to the product Do not heat the product or battery or expose it to heat e g inside a vehicle during the summer There is a danger of explosion or fire Safety Precautions A Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product Usage Related Use the pen for its intended purpose only Using the pen improperly may cause physical injury Do not place a candle light a cigar etc over or on the product There is a danger of fire Use a wall outlet or multi plug with a grounding part Failure to do so may cause electric shock hazard Make sure to have the product tested by a safety service engineer after repairing the product Authorized Samsung Repair Centers will carry out safety checks after a repair Using a repaired product without testing it for safety may cause an electric shock or fire In case of lightning immediately turn the system off disconnect the power cord from the wall outlet and phone line from the modem Do not use a modem or phone There is a danger of electric shock or fire Chapter 1 Getting Started Do not use your computer and AC Adapter on your lap or soft surfaces If the computer temperature increases there is a danger of burning yourself Connect only permitted devices to the connectors or ports of the computer Failure to do so may cause electric shock and fire
114. y cause an injury Chapter 1 Getting Started Q Do not install the computer on a slant or a place prone to vibrations or avoid using the computer in that location for a long time This increases the risk that a malfunction or damage to the product will occur Do not touch the computer vents or the connected AC adapter for extended periods while the computer is on Contact with the vent or the connected AC adapter for extended periods may result in low temperature burns such as redness on the skin Avoid blocking the vent at the bottom or side of the computer when using it on a bed or cushion If the vent is blocked there is a danger of damaging the computer or overheating the inside of the computer Ver 3 7 Safety Precautions A Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality Power Related y The power plug and wall outlet figures may differ depending on the country specifications and the product Do not touch the main plug or power cord with wet hands There is a danger of electric shock Do not exceed the standard capacity voltage current of a multiplug or power outlet extension when using it for the product There is a danger of electric shock or fire hazard Chapter 1 Getting Started If the power cord or power outlet makes a noise disconnect the power cord from the wall outlet and contact a
115. ystem Software does not display in the Recovery program use Method 2 to install the TPM program 2 Click on System Software Installation 3 The SW Update program will be launched Select TPM Host SW and click Install Now e If the system software media is supplied with the product you can install the program by using the system software media only when supplied 4 After the installation if you click OK the computer restarts Chapter 3 Using the computer Method 2 1 2 N OF Ul A Turn the computer on and immediately press the F4 key several times After a moment the Recovery program runs Click System Software When a pop up window appears to ask you to reboot the system click Yes The system starts to reboot After a moment the SW Update program automatically runs Connect to the network Select TPM Host SW and click Install After the program is completely installed click Close Close the SW Update window and reboot your computer again Using the TPM Security Device Optional Registering the TPM program Right click the icon Zi on the taskbar Run the Security Platform Management item with the admin authority Click the User Settings tab and initialize the settings The security authentication settings begin with the Initialization Wizard When the Initialization Wizard appears click Next Welcome to the Security Platform Quick Initialization Wizard q n f i n e 0 n

Samsung ATIV NP270E5J

Contents

Download Pdf Manuals

Related Search

Related Contents