Home

Beko DPU8360

image

Contents

1. You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank Connecting the water drain hose 1 Pull hose in the product by hand in order to disconnect it from where it is connected Do not use any tools to remove the hose 2 Connect one end of the drain hose supplied separately with the product to the connection point from where you removed the hose of the product in previous step 10 EN 3 Connect the other end of the drain hose directly to the wastewater drain or to the washbasin Hose must be fixed in every type of connection Your house will be flooded if the hose comes loose during water discharge i Water drain hose should be attached to a height of maximum 80 cm GJ Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine Adjusting the feet In order to ensure that the product operates more silently and vibration free it must stand level and balanced on its feet Balance the machine by adjusting the feet Turn the feet to left or right until the machine stands level and firmly i Never remove the adjustable feet from their housings First use Before st
2. Cancel button to start the programme e Water tank is full gt gt gt Drain the water tank Laundry has shrunk become felted or deteriorated e A programme suitable for the laundry type is not used gt gt gt Check the garment tag and select a programme suitable for the fabric type 31 EN Drum lighting does not turn on On models with lamp e Dryer is not switched on with the On Off button gt gt gt Make sure that the dryer is switched on e Lamp is defective gt gt gt Call Authorized Service Agent to have the lamp replaced End Anti creasing symbol is on e Anti creasing programme is activated in order to prevent laundry that has remained in the machine from creasing gt gt gt Turn off the dryer and take out the laundry End symbol is on e Programme is over Turn off the dryer and take out the laundry Lint Filter Cleaning symbol is on e Lint filter is not cleaned gt gt gt Clean the lint filter Lint Filter Cleaning symbol is flashing e Filter housing is clogged with lints gt gt gt Clean the lint filter housing e A deposit has built up on the lint filter pores that may cause clogging gt gt gt Wash the lint filter with warm water e Filter drawer is clogged gt gt gt Clean the sponge and the filter cloth in the filter drawer Water leaks from the loading door e Lint has accumulated on the inner surfaces of the loading
3. Cleaning warning symbol appears or after every 5 drying cycles e Ventilate the room where the dryer is located well during drying e For models with lamp keep the door closed if the On Off button is pressed if the machine is energized when 15 EN on the garment tags Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme es OC Ba Normal Drying at low Suitable for Do not dry temperatura temperature with drier Drying Hang without Dry ona aka spinning hanger Can beironed Canbe Do not iron with hot iron ironed with warm iron Laundry unsuitable for drying in the machine Laundry and items stated below are not suitable for drying in a dryer Laundry items with metal attachments such as metal buttons metal reinforcements or belt buckles Woollen or silk garments nylon stockings delicate embroidered fabrics and sleeping bags Garments made of delicate and valuable fabrics Fine net or voile curtains Items made of hermetic fibres such as pillows and quilts Very wet laundry items Unwashed dirty laundry items Laundry items containing rubber foam or rubber A Items cleaned washed or spotted with gasoil fuel oil dry laundry solvents industrial chemicals or other combustible or explosive materials should not be dried in the dryer A Items soiled with cooking oils acetone alcohol fuel oil
4. Cleaning and Water Tank warning symbols light up and End label appears on the display as a reminder at the end of this period ile 7 dl End A x vw A As the inside of the machine will be excessively hot when you cancel the programme while the machine is running activate the ventilation programme to cool it down i Machine will stop if you turn the Programme Selection knob while it is operating In this case current programme is aborted and the new programme information appears on the display 25 EN End of programme Lint Filter Cleaning and Water Tank warning symbols light up in the programme follow up indicator and End label appears on the display when the programme comes to an end The loading door can be opened and the machine becomes ready for a second cycle Press On Off button to switch off the machine Ann _ pee ULILILI nara LT Jel pin PAM AIO xt v Ad GJ If Anti creasing function is activated and the laundry is not taken from the machine at the end of the programme 2 hours Anti creasing programme is activated GJ Clean the lint filter after each drying See Lint Filter Loading Door Inner Surface GJ Drain the water tank after each drying cycle See Draining the water tank 26 EN 7 Maintenance and cleaning Service life of the product extends and up on the lint filter surface Dry the lint frequently
5. door and on the surfaces of the loading door gasket gt gt gt Clean the inner surfaces of the loading door and the surfaces of the loading door gasket Loading door opens spontaneously e Loading door is ajar gt gt gt Push the loading door to close until you hear a locking sound Water Tank warning symbol is on flashing e Water tank is full gt gt gt Drain the water tank e Water draining hose is bent gt gt gt If the product is connected directly to a wastewater drain check the water drain hose Filter Drawer Cleaning warning symbol is flashing e Filter drawer is not cleaned gt gt gt Clean the sponge and the filter cloth in the filter drawer A If you cannot eliminate the problem although you follow the instructions in this section consult your dealer or the Authorized Service Agent Never try to repair a nonfunctional product yourself 32 EN O Guarantee Important notes Your new product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase What is covered e Repairs necessary as a result of faulty materials defective components or manufacturing defect e The cost of functional replacement parts but excluding consumable items e The labour costs of a approved repairer to carry out the repair What is not covered e Transit delivery or accidental damage or misuse and abuse e Cabinet or appearance p
6. faced problems decrease if filter completely before reinstalling it cleaned at regular intervals A This product must be unplugged during maintenance and cleaning works control panel body etc Lint Filter Loading Door Inner Surface Lint and fibres released from the laundry to the air during the drying cycle are collected in the Lint Filter GJ Clean the entire inner surface of the loading door and loading door gasket with a damp cloth i Such fibre and lint are generally formed during wearing and washing A Always clean the lint filter and the inner surfaces of the loading door after each drying process GJ You can carefully clean the lint filter housing with a vacuum cleaner To clean the lint filter 1 Open the loading door 2 Remove the lint filter by pulling it up and open the lint filter 8 Clean lint fibre and cotton by hand or with a soft piece of cloth 4 Close the lint filter and place it back into its housing GJ A layer can build up on the lint filter pores that can cause clogging of the lint filter after using the machine for a while Wash the lint filter with warm water to remove the layer that builds 27 EN There are dampness sensors in the machine that detect whether the laundry is dry or not To clean the sensors 1 Open the loading door of the machine 2 Allow the machine to cool down if it is still ho
7. flashing i Additional laundry may be loaded taken out during the Time Delay period At the end of the Time Delay countdown process Time Delay symbol disappears drying process starts and the programme duration is displayed The time on the display is the total of normal drying time and delay time m gt LB SI 3 12 xt x Time Delay is activated by pressing the Start Pause Cancel button in the above display image Changing the delay time If you want to change the time during countdown 1 Press Start Pause Cancel button for 3 seconds to cancel the programme Repeat the Time Delay procedure for the desired time 2 Set the desired delay time with Time Delay and buttons The Time Delay symbol will flash 3 Press Start Pause Cancel button The Time Delay starts to count down The Time Delay symbol lights up Pause symbol disappears Start symbol appears 4 The in the middle of the displayed delay time will start flashing Cancelling the Time Delay If you want to cancel the Time Delay countdown and start the programme immediately 1 Press Start Pause Cancel button for 3 seconds to cancel the programme 2 Press Start Pause Cancel button to start the programme you have previously selected 23 EN Starting the programme Press Start Pause Cancel button to start the programme Start Pause symbol will light up to indicate that the programme has
8. in your washing machine Laundry comes out wet at the end of drying i After drying the hot clothes feel damper than their actual dampness level e Itis likely that the selected programme did not suit the laundry type gt gt gt Checking the care labels on clothes select appropriate programme for the laundry type or use timer programmes in addition e Pores of the lint filter are clogged gt gt gt Wash the lint filter with warm water e Filter drawer is clogged gt gt gt Clean the sponge and the filter cloth in the filter drawer e Excessive laundry is loaded gt gt gt Do not load the dryer in excess e Laundry is not spun sufficiently gt gt gt Spin your laundry at a higher speed in your washing machine Dryer does not switch on or the programme does not start Dryer does not start when it is set e It is not plugged in gt gt gt Make sure that the machine is plugged in e The loading door is ajar gt gt gt Make sure that the loading door is closed securely e Programme is not selected or the Start Pause Cancel button is not pressed gt gt gt Make sure that the programme is selected and the machine is not in Pause mode e Childproof Lock is activated gt gt gt Deactivate the Childproof Lock Programme is interrupted without any cause e Loading door is ajar gt gt gt Make sure that the loading door is closed securely e There was a power failure gt gt gt Press Start Pause
9. started and symbol between the remaining time will continue flashing Progress of programme Anti creasing Wardrobe Extra Iron Ventilation Progress of a running programme is indicated on the display by means of a set of symbols At the beginning of each programme step the relevant symbol in the series of symbols will light up and thus at the end of the programme all symbols will remain lit up The rightmost symbol on the display indicates the step being carried out Drying Drying symbol lights up in all programmes apart from ventilation Iron Dry Starts to illuminate when the dryness level reach Iron Dry step Wardrobe Dry Starts to illuminate when the dryness level reach Wardrobe Dry step Wardrobe Dry Extra Starts to illuminate when the dryness level reach Wardrobe Dry Extra step Ventilation Ventilation symbol illuminates when the programme comes to an end GJ Anti creasing symbol will illuminate at the end of the programme if Anti creasing function is activated Child proof Lock Machine is equipped with a Childproof Lock which prevents interfering with the current programme flow by pressing any button All buttons except the On Off button on the control panel are deactivated when the Child proof Lock is active In order to activate the Childproof Lock press Audio Warning and Anti Creasing buttons simultaneously for 3 seconds To start a new programme after the current programme is ove
10. your laundry completely Take out your laundry and ventilate them immediately after the programme is over e Daily Quick This programme is used to dry cottons and synthetics daily and lasts for 1 5 hour e Baby Clothing This programme is used for baby clothes that bear machine dryable approval on its label e Delicates You can dry your highly delicate laundry that are suitable for drying or laundry which is advised to be hand washed at a lower temperature i It is recommended to use a cloth bag to prevent certain delicate laundry from getting creased or damaged Take your laundry immediately out of the dryer and hang them after the programme is over in order to prevent them from getting creased e Freshen up Only ventilation is performed for 10 minutes without blowing hot air You can air the clothes that have been kept at closed environments for a long time and deodourise unpleasant odours thanks to this programme e Timer programmes You can select one of the 10 min 20 min 30 min 40 min 50 min 60 min 80 min 100 min 120 min 140 min and 160 min timer programmes to achieve the desired final drying level at low temperatures G With this programme the machine dries for the time selected regardless of the dryness level 20 EN BU MO hg ha Ah A at ra Programme selection and consumption table EN Approximate Spin speed in washing amount of Drying time machine rpm remainin
11. 0 350 700 250 100 700 350 Approximate weights g 150 300 200 500 350 700 100 125 Garments Blouses Cotton shirts Shirts Cotton dresses Dresses Jeans Handkerchiefs 10 pieces T Shirts 16 EN Loading the laundry 1 Open the loading door 2 Place the laundry in the machine without compressing 3 Push the loading door to close A Ensure that no items are caught in the door 17 EN g Selecting a Programme and Operating Your Machine Control panel 9 8 7 6 1 Washing Machine Spin Speed Timer Programme Selection button 2 Display 3 Start Pause Cancel button 4 Programme Selection knob 5 On Off button 6 Anti creasing button 7 Dryness Level button 8 Cancel Audio Warning button 9 Time Delay buttons IFAD e gt ul CIT Lo 2 CN T gt ll no g BEE CFC 7a Mm ALD o A ERE Z 2 Bog NA Spin speed Timer programmes Operation symbol Pause symbol Water Tank warning symbol Filter cleaning warning symbol Filter Drawer Cleaning warning symbol Remaining Time indicator Child proof Lock warning symbol Time Delay mode Loading door open warning symbol Anti creasing mode Audio Warning Level Cancel Audio Warning Dryness Level Anti creasing is activated gi Spin speed is used to show the remaining time more accurately It does not affect the perf
12. 5 Things to be done for energy saving 15 Laundry suitable for drying in the MacNN E nnsa KA naaa 15 Laundry unsuitable for drying in the IMACIING iaaa e EE aN 15 Preparing laundry for drying 16 Correct load capacity s 16 Loading the laundry nananana wanna 16 6 Selecting a Programme and Operating Your Machine 18 Preparing the machine nanana 19 Programme selection isina 19 Main PrograMMes seisis 19 Additional programmes n se 19 Auxiliary fUNCtIONS 00 eee cette 22 Warning symbols ce eeeeeeeeeee 22 Starting the progra mMer 24 Progress Of progra MMEren 24 Child proof LOCK cccceceeeeeeeeees 24 Changing the programme after it has STANICG E E E 24 Cancelling the programme 25 End 0f programme sssssrieisisrsineirs 26 7 Maintenance and cleaning 27 Lint Filter Loading Door Inner Surface27 Cleaning the sensors seee 27 Draining the water tank 28 Cleaning the filter drawer 28 Cleaning the evaporator 30 8 Troubleshooting 31 9 Guarantee 33 What is covered anna waaa anna 33 What is not covered 33 Important notes aan 33 10 Service 34 3 EN Dryer Overview D or e ON Top panel Control panel Loading door Kick plate opening tab Ventilation grids Adjustable feet 7 Kick plate 8 Type label 9 Lint filter 10 Water tank drawer 11 Power cable 4 EN Technical specifications Feight
13. BEKO Condenser Sensor Dryer Dry amp Save DPU 8360 W W ut ne Get the best from yo Please read this user manual first Dear Customer We hope that you get the best results from the product which has been manufactured in state of the art plants and passed through a strict quality control procedure Therefore please read the entire user manual carefully before using the product and keep it as a reference for future use In case of transferring the product to someone else give the manual as well The user manual will help you use your product in a fast and safe way e Read the user manual before installing and starting your product e Always follow the safety instructions e Keep this user manual within easy reach for future reference e Read also the other documents supplied with the product Remember that this user manual is also applicable for several other models Differences between models will be identified in the manual Explanation of symbols Throughout this user manual the following symbols are used Read the instructions i Important information or useful hints about usage A Warning for hazardous situations with regard to life and property AN Warning for electric shock A Warning for fire hazard A Warning for hot surfaces 2960310462_EN 26091 1 1754 This appliance s packaging material is recyclable Help recycle it and protect the environment by dropping it off in the municipal receptacles pro
14. The appliance should be transported only in a vertical upright position If during the course of transport the appliance has to be transported horizontally it must only be laid on its right hand side After bringing it to upright position it must not be operated for at least 12 hours to allow the system to settle Failure to comply with the above instructions could result in damage occurring to the appliance The manufacturer will not be held responsible if these instructions are disregarded Appropriate installation location e Install the product on a stable and level surface e Dryer is heavy Do not move it by yourself e Operate your product in a well ventilated dust free environment e Do not block the air ducts in front of and under the product with materials such as long pile rugs or wooden plinths e Do not install the product behind a door with a lock sliding door or a hinged door which can strike the product e Once the product is installed it should stay at the same place where its connections have been made When installing the product make sure that the rear wall of it does not touch anywhere tap socket etc Also pay attention to select an installation location which you will not be required to change afterwards e Place the product at least 1 5 cm away from the edges of other furniture N Do not place the product on the power cable Removing the transportation safety assembly A Remove th
15. You can also clean by hand provided that you wear protective gloves Do not attempt to clean with bare hands i Drying without the filter drawer sponge in place will damage the machine i A dirty lint filter and filter drawer will cause longer drying periods and higher energy consumption GJ A layer can build up on the lint filter pores that can cause clogging of the lint filter after using your machine for a while Wash the lint filter with warm water to remove the layer that builds up on the lint filter surface Dry the lint filter completely before using it 30 EN O Troubleshooting Drying process takes too much time e Pores of the lint filter are clogged gt gt gt Wash the lint filter with warm water e Filter drawer is clogged gt gt gt Clean the sponge and the filter cloth in the filter drawer e Ventilation grids on the front side of the machine are blocked gt gt gt Remove the objects if any that block ventilation in front of the ventilation grids e Ventilation is not sufficient since the room where the machine is installed is very small gt gt gt Open the door and window of the room to avoid the room temperature increase too much e Lime deposit has built up on the dampness sensor gt gt gt Clean the dampness sensor e Excessive laundry is loaded gt gt gt Do not load the dryer in excess e Laundry is not spun sufficiently gt gt gt Spin your laundry at a higher speed
16. acity as stated in the technical specifications table e Power cable of this product is equipped with a conductor and a grounding plug that allows for grounding the product This plug must be inserted into a socket which is installed and grounded in accordance with the local laws and regulations Grounding installation decreases the risk of electric shock by opening a path with low resistance for the electricity flow in case of a malfunction or failure Do not neglect ka to have the grounding installation made by a qualified electrician If you have any suspect about the grounding installation have it 6 EN checked by a qualified electrician or the Authorized Service Agent Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations The product should not be plugged in during installation maintenance cleaning and repair works Always have the repair procedures carried out by the Authorized Service Agent Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons Do not use electrical devices in the product You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect Items cleaned or washed with gasoil fuel oil dry laundr
17. al to hear metallic noise from the compressor sometimes during operation GJ Water collected during operation is pumped to water tank It is normal to hear pumping noise during this process 12 EN Electrical Connection Make sure that you have an earthed power outlet socket rated at 13 amps minimum Attention If you use your dryer as built in the socket must be reachable after installation or a separate switch which can disconnect the two poles must be used in the installation Check for suitability For a permanent connection a master switch with at least 3mm contact clearance and minumum 13 A rating must be used Electrical requirements Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position Should the mains lead of the appliance become damaged or need replacing at any time it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent A Warning This appliance must be earthed If the fitted moulded plug is not suitable for your socket then the plug should be cut off and an appropriate plug fitted The moulded plug on this
18. appliance incorporates a 13A fuse Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used Do not forget to refit the fuse cover In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug Fuse covers are available from any good electrical store In order to avoid hazards damaged supply cord should be replaced by the manufacturer its service agent or similarly qualified people Important Fitting a different plug As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug proceed as follows 1 Connect the green yellow or green earth wire to the terminal in the plug marked E or with the symbol or coloured green and yellow or green 2 Connect the blue neutral wire to the terminal in the plug marked N or coloured black 3 Connect the brown live wire to the terminal in the plug marked L or coloured red With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box If in doubt contact a qualified electrician Green and yellow Blue or black Brown or red 13 EN Washer dryer combination Do not stack washing machine on top of the tumble dryer This would damage both ap
19. are marked accordingly e Dry only those articles in your product that are stated in this manual e This product is not intended to be used by persons with physical sensory or mental disorders or unlearned or inexperienced people including children unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product Children s safety e Electrical products are dangerous for the children Keep children away from the product when it is operating Do not let them tamper with the product e Do not allow children sit climb on or enter in the product e Do not forget to close the loading door when leaving the room where the product is located e Packaging materials are dangerous 8 EN 3 Installation To make the product ready for use make sure that the electricity and water drainage system are appropriate before installation If they are not call a qualified technician and plumber to have any necessary arrangements carried out GJ Preparation of the product s location as well as the electrical and waste water installations is the customer s responsibility GJ Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons Prior to installation visually check if the product has any defects on it If so do not have it installed Damaged products cause risks for your safety A
20. arting to use the product make sure that all preparations are made in accordance with the instructions in sections Important safety instructions and Installation Disposing of packaging material Packaging materials are dangerous to children Keep packaging materials in a safe place away from reach of the children Packaging materials of the product are manufactured from recyclable materials Dispose of them properly and sort in accordance with recycled waste instructions Do not dispose of them with normal domestic waste Transportation of the product 1 Unplug the product before transporting it 2 Remove the water drain if any 3 Drain the water in the product completely We recommend carrying the product in upright position If it is not possible to carry the machine in the upright position we recommend carrying it by tilting towards the right side when looked from the front After the product is moved to its new place you should wait for 12 hours before starting it 11 EN Disposing of the old product Dispose of the old product in an environmentally friendly manner Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your product For children s safety cut the power cable and break the locking mechanism of the loading door so that it will be nonfunctional before disposing of the product Warnings about sounds i It is norm
21. arts including knobs flaps handles or container lids e Accessories or consumable items including but not limited to ice trays scrapers cutlery baskets filters and light bulbs e Repairs required as a result of unauthorised repair or inexpert installation that fails to meet the requirements contained in the user instruction book e Repairs to products used on commercial or non residential household premises e Loss of frozen food in freezers or fridge freezers Food loss insurance is often included within your household contents insurance policy or may be available separately from your retailer 33 EN Your product is designed and built for domestic household use only The guarantee will be void if the product is installed or used in commercial or non residential domestic household premises The product must be correctly installed located and operated in accordance with the instructions contained in the User Instructions Booklet provided Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines Tumble Dryers Dishwashers Dryers and Electric Cookers Gas Cookers must only be installed by a Gas safe registered Gas Installer The guarantee is given only within the boundaries of the United Kingdom and the Republic of Ireland The guarantee is applicable only to new products and is not transferable if the product is resold Disclaims an
22. completed a warning symbol will appear to remind that the filter needs to be cleaned i If the Filter Cleaning symbol flashes continuously refer to Troubleshooting section lolo Te EECE Water tank When the programme is completed a warning symbol will appear to remind that the water tank needs to be drained If the water tank becomes full while the programme is running the warning 22 EN symbol will start to flash and machine will pause Drain the water in the water tank and press Start Pause Cancel button to resume the programme The warning symbol turns off and the programme resumes operating _ Cleaning of filter drawer Warning symbol flashes with certain intervals to remind that the filter drawer needs to be cleaned Loading door open This warning symbol appears when the loading door of the dryer is open U Time Delay Time Delay function allows you to delay the startup of the programme up to 24 hours 1 2 Open the loading door and put the laundry in Select the drying programme spin speed and if required the auxiliary functions Press Time Delay buttons and to set the desired time delay The Time Delay symbol will flash Press Start Pause Cancel button The Time Delay starts to count down The Time Delay symbol lights up Start symbol appears The in the middle of the displayed delay time will start
23. e transportation safety assembly before using the product for the first time Open the loading door 2 There is a nylon bag inside the drum that contains a piece of styrofoam Hold it from its section marked with XX XX 8 Pull the nylon towards yourself and remove the transportation safety assembly a4 Z Make sure that no part of the 9 EN transportation safety assembly remains inside the drum Under counter installation e This product can be installed under a counter if the height of the counter is sufficient N Never operate the dryer without the top trim is in place Stock number of under bench 2979600100 2973600100 installation part e Leave at least 3 cm of space around the sides and the rear wall of the product when installing it under a counter or in a cupboard Mounting over a washing machine e A fixing device should be used between the two machines when installing the dryer above a washing machine The fixing device can usually be obtained from a specialist retailer e Total weight of the washing machine and the dryer with full load when they are placed on top of each other reaches to approx 180 kilograms Place the products on a solid floor that has sufficient load carrying capacity Connecting to the drain In products equipped with condenser unit water accumulates in the water tank during the drying cycle You should drain accumulated water after each drying cycle
24. edustan th apacly max eight net 49 kg oltage ower See type label Main Model Code Type label is behind the loading door Specifications of this appliance may change without notice to improve the quality of the product Figures in this manual are schematic and may not match your product exactly Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards Depending on operational and environmental conditions of the appliance values may vary 5 EN 2 Important safety instructions This section contains safety instructions that will help protect from risk of personal injury or property damage Failure to follow these instructions shall void any warranty General safety e Never place the product on a carpet o covered floor otherwise lack of airflow beneath the machine will cause electrical parts to overheat ka This will cause problems with your product e Do not operate the product if the power cable plug is damaged Call the Authorized Service Agent e Do not make any changes on the bd plug supplied with the product If it is not compatible with the socket have s a qualified electrician change the socket with a suitable one e Never touch the plug with wet hands Never unplug by pulling on the cable always pull out by grabbing the plug e Connect the product to a grounded ka outlet protected by a fuse of suitable cap
25. formed when sign appears Programme duration can change depending on the selection i You can activate this function only before the programme has started etre ext tre xt Anti creasing You can use Anti creasing function to prevent laundry from creasing if you will not take the laundry out after the programme has come to an end This programme rotates the laundry in every 240 second for 2 hours to prevent creasing Anti creasing is activated but the programme is still running in the first display image below Drying cycle is completed and the Anti creasing step has started in the second display image nad 2 tt v l Xt A A tA tt v i Press Anti creasing button to activate this function Changing the contrast Adjust the display contrast in order to make the symbols on the display appear clearer It may particularly be necessary to change the contrast setting of the display when the dryer is installed over a washing machine Press and hold the Spin Speed Timer Programme button for 3 seconds When the contrast is changed all symbols on the display will appear for 3 seconds in order to indicate that the process is complete i Perform the same procedure to revert back to the previous contrast setting Warning symbols i Warning symbols may differ according to the model of your machine Lint filter cleaning When the programme is
26. g minutes humidity Programmes Capacity kg Cottons Coloureds 1000s 60 eo paas 2 ww eose is om mf Synthetics Energy consumption values Approximate n Energy S Spin speed in washing amount of Programmes Capacity kg pagi consumption machine rpm remaining GR value kWh humidity Cottons linen Ready to 1000 60 Cottons Ready to iron Cottons Ready to iron to iron 1000s 60 60 Energy Label standard programme EN 61121 2005 All values given in the table have been fixed according to EN 61121 2005 Standard These values may deviate from the values in the table according to the laundry type laundry spin speed environmental conditions and voltage fluctuations 21 EN Auxiliary functions Audio Warning The machine will give an audio warning when the programme comes to an end If you do not want the machine to give an audio warning press the Volume Level button repeatedly until x appears on the display Use the same button to adjust the volume level GJ You can activate this function either before or after the programme starts Al Al a a Cancel Audio warning Audio warning Audio warning audio warning level 1 level 2 level 3 Dryness level Used to adjust the required dryness level More drying is performed compared to the default settings when sign appears and less drying is per
27. kerosene stain removers turpentine paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer Preparing laundry for drying e Check all garments before loading and make sure that there is no any lighters coins metal pieces needles and etc in their pockets or on them e Laundry may be tangled after washing Separate the laundry items before placing them into the dryer e Sort the laundry according to their types and thicknesses Dry the same type of laundry together For instance thin kitchen towel and table cloths get dry earlier than the thick bath towels GJ Laundry must be spun at the highest spin speed that the washing machine allows on basis of the fabric type Correct load capacity J Follow the instructions in the Programme selection and consumption table Do not load more than the capacity values stated in the table i It is not recommended to load the dryer with laundry exceeding the level indicated in the figure Drying performance will degrade when the machine is overloaded Furthermore dryer and the laundry can get damaged Following weights are given as examples Home articles Appr oxmate weights g Cotton quit covers double Cotton quit covers single Bed sheets double Bed sheets single Large tablecloths Small tablecloths Tea napkins Bath towels Hand towels 50
28. lt covers towels bathrobes etc e Synthetics Dry less durable laundry with this programme Recommended for synthetics Additional programmes For special cases following additional programmes are available in the machine i Additional programmes may differ according to the features of your machine e Xpress 1kg You can use this programme to dry your cotton laundry that you have spun at high speeds in your washing machine This programme dries 1 kg cotton laundry 3 Shirts 3 T shirts in 45 minutes i To obtain better results from your dryer your laundry must be washed at suitable programmes and spun at the recommended speed in the washing machine e Shirts This programme dries the shirts more sensitively and creases them less and thus helps to iron them more easily i There may be a little moisture on the shirts at the end of the programme We recommend you not to leave the shirts in the dryer e Jeans Use this programme to dry your jeans that are spun at high speeds in the washing machine e Mix Use this programme to dry colour fast synthetic and cotton laundry items together e Sportswear Use this programme to dry together the synthetic and cotton laundry items and the laundry items made of mixed fabrics e Woollens care You can use this programme to ventilate 19 EN and soften your woollen laundry that can be washed in the washing machine Do not use this programme to dry
29. ormance of your machine Time that appears on display indicates the remaining time until the end of the programme and changes according to the dampness level of the laundry 18 EN Preparing the machine 1 Plug in the machine 2 Place the laundry in the machine 3 Press the On Off button i Pressing the On Off button does not necessarily mean that the programme has started Press Start Pause Cancel button to start the programme Programme selection 1 Decide the appropriate programme from the table below which includes drying levels 2 Select the desired programme with the Programme Selection knob Only the cotton laundry is dried at normal temperature Thick and multi layered laundry towels linens jeans and etc are dried in a way that they do not require ironing before being placed in the wardrobe Extra Dry Normal laundry tablecloths underwear Cupboard and etc are dried in a way dry that they do not require ironing before being placed in the wardrobe Normal laundry shirts dresses and etc are dried ready to be ironed Iron Dry i For further programme details see Programme selection and consumption table Main programmes Depending on the fabric type the following main programmes are available e Cottons Dry durable laundry with this programme Dries at normal temperature It is recommended to use for your cotton items bed sheets qui
30. pliances and guarantees would become void It is also unsafe to stack an appliance on top of another without using a suitable and approved stacking kit obtained from specialist retailers 14 EN g Preparations for drying T machine IS Not IN use Laundry suitable for drying in the machine i Always obey the instructions given hings to be done for energy saving Following information will help you use the product in an ecological and energy efficient manner e Operate the product at a capacity suitable for the programme you have selected and pay attention not to overload e Spin your laundry at the highest speed possible when washing them Thus the drying time is shortened and energy consumption is reduced e Dry the same type of laundry together e Follow the instructions in the user manual for programme selection e Leave sufficient clearance at the front and rear side of the dryer for air circulation Do not block the ventilation grills at the front side of the product e Do not open the loading door of the machine during drying unless necessary If you must certainly open the loading door do not to keep it open for a long time e Do not add new wet laundry during drying e Lint and fibres released from the laundry to the air during the drying cycle are collected in the Lint Filter Clean the lint filter before or after each drying cycle e Clean the filter drawer regularly either when the Filter Drawer
31. r or to interrupt the current programme the Child proof Lock should be deactivated Press the same buttons for 3 seconds again to deactivate the Child proof Lock GJ Lock symbol will appear on the display when the Child proof Lock is activated T O G Child proof Lock is deactivated when the machine is switched off and on with On Off button When the Child proof Lock is activated e Display symbols will not change even if the position of Programme Selection knob is changed while the machine is running or in halt e f the Child proof Lock is deactivated after changing the position of the Programme Selection knob while the machine is running the machine stops and new programme information is displayed Changing the programme after it has started After the machine starts you can change the selected programme and dry your laundry in a different programme 1 If you want to select Extra Dry 24 EN programme instead of Iron Dry programme press and hold the Start Pause Cancel button for 3 seconds to cancel the programme 2 Select Extra Dry programme by turning the Programme Selection knob 3 Press Start Pause Cancel button to start the programme GJ You can also select a new programme by turning the Programme Selection knob while the machine is operating In this case current programme is aborted and the new programme information appears on the display bo je Ea l Adding
32. removing laundry in Pause mode In order to add or take out laundry after the drying programme has started 1 Press Start Pause Cancel button to switch the machine to Pause mode Drying process will stop 2 While in Pause mode open the loading door add or take out laundry and close the loading door 3 Press Start Pause Cancel button to start the programme GJ Any laundry added after the drying process has started may cause the clothes that are already dried in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over i You may repeat laundry adding or removing process as many times as you desire during drying However this process will increase the programme time and energy consumption since the drying process will be interrupted repeatedly Therefore it is recommended to add laundry before the drying programme has started i If you select a new programme by turning the Programme Selection knob while your machine is in Pause mode then the current programme is aborted and new programme information is displayed Do not touch the inner surface of the drum when adding or taking out laundry while a programme is running Surfaces of the drum are hot Cancelling the programme If you want to stop drying and cancel the programme for any reason after the machine has started to run press and hold the Start Pause Cancel button for 3 seconds Lint Filter
33. se contact the Customer Help Line Tel 0845 600 4911 For service under guarantee simply telephone the appropriate number below 34 EN BEKO Beko plc Beko House Caxton Way Watford Hertfordshire WD18 8UF Tel 0845 6004911 Fax 0845 6004922 Email service beko co uk www beko co uk
34. t due to the drying process 3 Wipe the metal surfaces of the sensor with a soft cloth dampened with vinegar and dry them GJ Clean metal surfaces of the sensors 4 times a year G Do not use metal tools when cleaning metal surfaces of the sensors Never use solvents cleaning agents or similar substances for cleaning due to the risk of fire and explosion Draining the water tank Dampness of the laundry is removed and condensed during drying process and the water formed accumulates in the water tank Drain the water tank after each drying cycle N Condensed water is not drinkable N Never remove the water tank when the programme is running If you forget to drain the water tank the machine will stop during the subsequent drying cycles when the water tank is full and the Water Tank warning symbol will flash If this is the case drain the water tank and press Start Pause Cancel button to resume the drying cycle To drain the water tank 1 Pull the drawer and remove the water tank carefully 2 Drain the water in the tank 3 If there is lint accumulation in the funnel of the water tank clean it under running water 4 Place the water tank into its seat Cleaning the filter drawer Lint and fibre that could not be captured by the lint filter are blocked in the filter drawer behind the kick plate Filter Drawer Cleaning warning light will light up maximum at every 5 drying c
35. t install or leave the dryer in places where it will be exposed to outdoor conditions Your product can be operated at temperatures between 5 C and 35 C If the operating conditions fall outside of this range operation of the product will be adversely affected and it can get damaged Do not tamper with the controls Unplug the product when it is not in use Remove the loading door of the drying compartment before decommissioning or disposing of the product Check all garments before loading and make sure that there is no any lighters coins metal pieces needles and etc in their pockets or on them e Make sure that the pets do not enter into the product Check the drum of the product before using it e Make sure that original spare parts and accessories are used during maintenance works to children Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives e Do not lean on the loading door when itis open The product may tip over e When your machine is not in use or when you unload the laundry after completion of drying process turn the machine off with the On Off button In cases where the On Off button is in On position while the machine is energized keep the loading door closed Intended use e This product has been designed for domestic use It should not be used for other purposes e Product must only be used for drying of textiles that
36. t will e not damage them If you open the loading door before the cool down step completes hot vapour will come e out N Never stop the dryer before the programme completes If you must do this remove all laundry quickly and lay them out to a suitable place to dissipate the heat e Always clean the lint filter before or o after each loading Never operate the dryer without the lint filter installed e Clean ventilation grid of the product regularly Do not allow fibre dust and dirt accumulation around the ventilation grid and at adjacent areas e e Power cable plug must be within easy reach after installation e Do not dry unwashed items in the 7 EN dryer Items soiled with cooking oils acetone alcohol fuel oil kerosene stain removers turpentine paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer Garments or pillows bolstered with rubber foam latex foam bathing caps water resistant textiles materials with rubber reinforcement and rubber foam pads should not be dried in the dryer Do not use fabric softeners and anti static products unless they are recommended by the manufacturers of the relevant product Use softeners anti static products and etc in accordance with the instructions of their manufacturers Do not install the product behind a door with a lock sliding door or a hinged door which can strike the product Do no
37. vided for this purpose Your appliance also contains a great amount of recyclable material It is marked with this label to indicate the used appliances that should not be mixed with other waste This way the appliance recycling organised by your manufacturer will be done under the best possible conditions in compliance with European Directive 2002 96 EC on Waste Electrical and Electronic MAG Equipment Contact your town hall or your retailer for the used appliance collection points closest to your home We thank you doing your part to protect the environment TABLE OF CONTENTS 1 Dryer 4 COVEN VIGW am GN 4 Technical specifications 5 2 Important safety instructions 6 General safety esee 6 Intended IU 8 Children s safety cecceeeeeeree eee 8 3 Installation 9 Appropriate installation location 9 Removing the transportation safety ASSEMDIY aa anakan 9 Under counter installation 9 Mounting over a washing machine 10 Connecting to the drain eee 10 Adjusting the Toolea sase eisian 10 FIKS TUSE Amana 11 Disposing of packaging material 11 Transportation of the product 11 Disposing of the old product 11 Warnings about SOUNAS nanan 11 4 Electrical Connection 13 AMEN TON aka AANTAY 13 Electrical requirements 13 Fitting a different plug oo eee 13 Washer dryer combination 14 5 Preparations for drying 1
38. y liability for incidental or consequential damages The guarantee does not in anyway diminish your statutory or legal rights 10 Service Please keep your purchase receipt UK Mainland amp Northern Ireland or other proof of purchase in a safe Fridges amp Freezers 0845 600 4903 place you will need to have it should Electric Cookers 0845 600 4902 the product require attention under Gas amp Dual Fuel Cookers guarantee 0845 600 4905 You should also complete the details Washing Machines amp Tumble Dryers below it will help us assist you when 0845 600 4906 requesting service The model number is printed on the Instruction Booklet and the serial number is printed on the Rating Label affixed to the appliance Model No Serial No Retailer Date of purchase Republic of Ireland All Refrigeration 01 862 3411 All Cookers Washing Machines amp Dryers Tumble Dryers Dishwashers Before requesting service please check the trouble shooting guide in the Operating Instructions as a charge may be levied where no fault is found even though your product may still be under guarantee Service once the manufacturers guarantee has expired If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreement document Otherwise please call the appropriate number above where service can be obtained at a charge Should you experience any difficulty in obtaining service plea
39. y solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor Do not dry the laundry cleaned with industrial chemicals in the dryer Underwear that contains metal reinforcements should not be dried in the dryer Dryer can get damaged if metal reinforcements come loose and break off during drying Never attempt to repair the product yourself Do not perform any repair or replacement procedures on the product even if you know or have the ability to perform the required procedure unless it is clearly suggested in the operating instructions or the published service manual Otherwise you will be putting your life and others lives in danger e For failures that you cannot remedy by applying the procedures in safety instructions turn off and unplug the product and call the Authorized Service Agent e Do not reach into the machine when the drum is spinning e Do not use extension cords multi plugs or adaptors to connect the e dryer to power supply in order to decrease the risk of fire and electric shock e Never wash the product by spreading e or pouring water onto it There is the risk of electric shock AX The final step of the drying programme namely the cool down step is performed without applying heat to ensure that the laundry items are kept at a temperature tha
40. ycles as a reminder There is a two level filter in the filter drawer The first level is the filter drawer sponge and the second level is the filter cloth To clean the filter drawer 1 Press the kick plate button to open the kick plate 28 EN 2 Remove the filter drawer cover by turning it in the direction of arrow 6 Clean lint fibre and cotton from the filter cloth by hand or with a soft piece of cloth GJ When you notice a layer that may 4 Open the filter drawer by pressing the red button 5 9 29 EN lead to clogging on filter cloth please clean the layer by washing in warm water Let the filter cloth dry thoroughly before installing back the filter drawer Hand wash the filter drawer s sponge to remove hair and lint on it Squeeze the sponge by hand to remove excessive water It is not necessary to clean the sponge if lint and fibre accumulation on it is not significant Place the sponge back into its place Close the filter drawer as to lock the red button 10 Place the filter drawer back into its Cleaning the evaporator place turn the filter drawer cower Carefully clean the lints accumulated on clockwise making sure that it is the fins of the evaporator located behind closed securely the filter drawer with a vacuum cleaner i

Download Pdf Manuals

image

Related Search

Related Contents

User Manual  P520 Users Manual - Zebra Technologies Corporation    Sony W715 98g Black  Biotrituradora 13cv  「給湯器の掃除を一切やらなくてもよくなる」等と不実を告げて  Mode d`emploi  (III): Medidas de prevención y protección durante el mantenimiento  ASA Electronics AWM910 User's Manual  back-up alarm specifications, installation and operating  

Copyright © All rights reserved.
Failed to retrieve file