Beko DCU6130
Contents
1. a great amount of recyclable material It is marked with this label to indicate the used appliances that should not be mixed with other waste This way the appliance recycling organised by your manufacturer will be done under the best possible conditions in compliance with European Directive 2002 96 EC on Waste Electrical and Electronic Equipment Contact your town hall or your retailer for the used appliance collection points closest to your home We thank you doing your part to protect the environment DCU6130WSB 080512 1652 TABLE OF CONTENTS 1 Your Dryer 4 OVEVIEW 2d 4 Technical Specifications 5 2 Important safety information 6 General safety 6 Intended USE oom Wo 7 Children s safety ooo T 3 Installation 8 Appropriate installation location 8 Removing the transportation safety ASSEMDIY pin naat at anda 8 Under counter installation 8 Mounting over a washing machine 8 Connection to water drain 8 Adjusting the feet anna 9 FIPSHUSC a AAA A sien 9 Disposing of packaging material 9 Transportation of the machine 9 Disposing of the old machine 9 4 Electrical Connection 10 Attention esnean nina 10 Electrical requiremenis 10 Fitting a different PIUG oo 10 Washer dryer combination 10 5 Initial preparations for drying11 Things to be done for energy sa2. hose aa Da 1 Remove the hose on the machine by pulling it out from its end Do not use any tools to take out the hose 2 Connect the special drain hose supplied with the machine to the pipe fitting 3 The other end of the drain hose can be directly connected to the wastewater drain or to the washbasin The fitting must always be secured in all types of connections Your house may be flooded if the hose gets out of its housing during water discharge Important e The hose should be attached to a height of maximum 80 cm e You must be careful not the pinch or bend the hose e The end of the hose should not be bent it should not be stepped on and it must not be folded between the drain and the machine Adjusting the feet In order to ensure that your machine operates more silently and vibration free it must stand level and balanced on its feet Balance the machine by adjusting the feet Rotate the feet to adjust until the machine stands level and firmly 9 E Never unscrew the adjustable feet from their housings First use e To have the product ready for operation before calling the authorised service agent make sure that its location and power supply installations are appropriate If they are not call a qualified electrician to have any necessary arrangements carried out e Make sure that the powe
3. the filter may be clogged Wash with water e Excessive laundry might have been loaded in Do not load the dryer in excess Dryer does not switch on or the programme does not start Dryer is not activated when set e It might have not been plugged in Make sure that the machine is plugged in e The loading door may be ajar Make sure that the loading door is properly closed e Programme might have not been set or the Start Pause Cancel button might have not been pressed Make sure that the programme has been set and it is not in Pause mode e Childproof lock might have been activated Deactivate the childproof lock Programme has been interrupted without any cause e The loading door may be ajar Make sure that the loading door is properly closed e Electricity may be cut off Press Start Pause Cancel button to start the programme e Make sure that the condenser cover and the red lock is closed securely Laundry has shrunk become felted or deteriorated e Aprogramme suitable for the laundry type might have not been used Dry only the laundry which is suitable for drying in dryer after checking the labels on your clothes e Select a programme with suitable low temperature for the laundry type to dry your clothes Drum lightning does not come on For models with lamp e Dryer might have not been started by using the On Off button Make sure that the dryer is on e Bulb may have blown Call the authoriz
4. the water tank your dryer will stop during the following drying cycles when the water tank is full and the Water tank warning light will turn on If this is the case press the Start Pause Cancel button to resume the drying cycle after draining the water tank To drain the water tank 1 Drain the water as shown on the picturre 2 If there is lint accumulation in the water tank cover clean it and press to close 3 Place the water tank into its seat 21 For the condenser Hot and humid air in the condenser is cooled with the cold air from the room Thus the humid air circulating in your dryer is condensed and then pumped into the tank Clean the condenser after every 30 drying cycles or once a month To clean the condenser 1 If a drying process has been carried out open the door of the machine and wait until it cools down 2 Unlock the 2 condenser locks after opening the kick plate EN 4 Clean the condenser by applying pressurized water with a shower head and wait until the water drains 5 Place the condenser in its housing Fasten the 2 locks and make sure that they are seated securely j _ ox 22 EN 8 Suggested solutions for problems Drying process takes too much time e Meshes of the filter may be clogged Wash with water Laundry comes out wet at the end of drying e Meshes of
5. If you have any suspect about the grounding connection have it checked by a qualified electrician service representative or service personnel Do not reach into the machine when the drum is spinning Unplug the machine when it is not in use Never wash down the appliance with water There is the risk of electric shock Always disconnect by unplugging from the mains before cleaning Never touch the plug with wet hands Never unplug by pulling on the cable always pull out by grabbing the plug only Do not operate the machine if the power cable or plug is damaged Never attempt to repair the machine yourself otherwise you will be putting your life and others lives in danger For malfunctions that cannot be solved by following the information given in the safety instructions Turn off the machine and contact an authorised service agent Do not stop the dryer before the drying cycle comes to an end unless you will remove all laundry from the dryer quickly in order to hang them and dissipate the heat Remove the door of the drying compartment before decommissioning or disposing of the product The final step of the drying cycle cool down cycle occurs without applying heat to ensure that the items are left at a temperature that will not damage them Fabric softeners or similar products should be used as specified by the fabric softener instructions Underwear that contains metal reinforcements should not be placed in a
6. Table Always start e Do not dry your unwashed laundry in the the programme in accordance with the dryer maximum load capacity e Items soiled with cooking oils acetone g Adding laundry to the machine more alcohol fuel oil kerosene stain remover than the level shown in the figure is not turpentine paraffin and paraffin removers recommended Drying performance will must be washed in hot water with plenty of degrade when the machine is overloaded detergent before being dried in the dryer Furthermore your dryer and your laundry e Garments or pillows bolstered with rubber can be damaged foam latex foam shower bonnets water Ig Place your laundry into the drum loosely so resistant textiles materials with rubber that they will not get tangled reinforcement and rubber foam pads Following weights are given as examples should not be dried in the dryer e Do not use fabric softeners and anti static Home articles Approximate products unless they are recommended by weights 9 the manufacturers of the fabric softener or Cotton quit covers double 1500 the product Cotton quit covers single 1000 e Do not dry the underwear reinforced with Bed sheets double metal parts in the dryer If these metal Bed sheets single reinforcements loosen and break during drying they will damage your dryer Preparing laundry for drying Small tablecloths Check all laundry items before loading them Tea napkins into the product to make sure
7. ails see Programme Selection Table Main programmes Depending on the type of laundry the following main programmes are available Cottons You can dry your durable laundry with this programme Dries at high temperature It is recommended to use for your cotton items such as bed sheets quilt cover underclothing etc Synthetics You can dry your less durable laundry with this programme It dries at a lower temperature 14 compared to the cottons programme It is recommended for your synthetic laundry Such as shirts blouses synthetic cotton blended laundry etc G Do not dry curtains and lace in your machine Anti creasing A 2 hour anti creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out after the programme is over This programme rotates the laundry in 10 minute intervals to prevent creasing Special programmes For special cases there are also extra ppgrammes available Additional programmes may differ according to the model of your machine eXpress 35 min You can use this programme to dry the cottons that are spun at high speeds in your washing machine It can dry your 2 kg Cotton laundry 3 Shirts 5 T Shirts within 35 minutes E In order to obtain better results from the dryer programmes your laundry must be washed with suitable programme and spun at the recommended spin speeds in your washing machine e Shirts Dries th
8. al replacement parts but excluding consumable items The labour costs of a approved repairer to carry out the repair What is not covered Transit delivery or accidental damage or misuse and abuse Cabinet or appearance parts including knobs flaps handles or container lids Accessories or consumable items including but not limited to ice trays scrapers cutlery baskets filters and light bulbs Repairs required as a result of unauthorised repair or inexpert installation that fails to meet the requirements contained in the user instruction book Repairs to products used on commercial or non residential household premises Loss of frozen food in freezers or fridge freezers Food loss insurance is often included within your household contents insurance policy or may be available separately from your retailer 24 Important notes EN Your product is designed and built for domestic household use only The guarantee will be void if the product is installed or used in commercial or non residential domestic household premises The product must be correctly installed located and operated in accordance with the instructions contained in the User Instructions Booklet provided Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines Tumble Dryers Dishwashers Dryers and Electric Cookers Gas Cookers must only be installed by a Gas safe registered Gas Insta
9. ciency to G Lowest Efficiency Approximate amount of Drying time remaining minutes humidity Spin speed in Capacity kg washing machine rpm 1200 1000 1200 1000 1200 1000 1400 1000 3 3 Q D 2 9 3 3 F 3 n D 5 Q ko O 7 a K a O o o z 9 E 2 5 5D o a lou 2 2 D Qa o 2 lt Normal dry 1200 1000 w a is 7 lt 2 gt T Ri D Alm O a no wT co co 8 8 0 0 D D a A aN Ca 2 2 oa lt Energy consumption values Spin speed in D te Programmes Capacity kg i i ini Annual Energy Consumption kWh 274 80 Energy Label standard programme EN 61121 2005 All values given in the table have been fixed according to EN 61121 2005 Standard These values may deviate from the table according to the laundry type laundry spin speed environmental conditions and voltage fluctuations Estimated annual consumption for a four person house hold which normally dries using a drier 16 Auxiliary function Cancel audio warning Your dryer will give an audio warning when the programme comes to an end If you do not want to hear the audio warning press Cancel Audio Warning button The relevant light will turn on when this button is pressed and an audio warning will not be given when the programme comes to an end You can select this function either before or after the programme starts Warning indicators Warning indicators may differ acc
10. ck of the machine should not be active in order to perform these two operations If the child proof lock is active deactivate it before performing these operations EN Adding removing laundry in standby mode In order to add or remove laundry after the programme starts 1 Press the Start Pause Cancel button to switch the dryer to Pause mode Drying process will stop 2 Open the door at Pause position and close it again after adding or taking out laundry 3 Press Start Pause Cancel button to start the programme g Any laundry added after the drying process has started may cause the dried clothes in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over g Laundry may be added or taken out as much as desired during a drying process but this process will extend the programme duration and increase energy consumption since the drying will be interrupted continuously Therefore it is recommended to add laundry before the drying programme has started Child proof lock There is a child proof lock to prevent any programme interruption due to the pressing of button while the programme is running The loading door and all buttons except the On Off button on the control panel are deactivated when the child proof lock is active Press the Start Pause Cancel and Cancel audio warning buttons simultaneously for 3 seconds to activat
11. decreased Pay attention to dry same types of laundry together Follow the instructions in the user manual for programme selection Make sure that sufficient clearance is provided at the front and rear side of the dryer for air circulation Do not block the grill at the front side of the product Do not open the door of the machine during drying unless necessary If you must certainly open the door pay attention not to keep it open for a long time Do not add new wet laundry during drying Lint and fibres released from the laundry to the air during the drying cycle are collected in the Lint Filter Make sure that you clean the filters before or after each drying In models with condenser make sure that you clean the condenser regularly at least once every month or after every 30 drying cycles In vented models follow the hose connection rules in the user manual and pay attention to the hose cleaning Ventilate the room where the dryer is located well during drying For power saving in models with lamps at times when your dryer is not in use keep the door closed if the On Off button is pressed if the dryer is energized Laundry suitable for drying in the machine GI Always follow the suggestions on the laundry labels Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme 11 N KA Low Suitable for Do not
12. dry temperature drier with drier Drying Normal temperature Drying Dry ona Hang without hanger spinning Can be ironed Can be with hot iron ironed with warm iron Kaien aly Do not iron Laundry unsuitable for drying in the machine EN Laundry items with metal attachments such as belt buckles and metal buttons can damage your dryer Do not dry items such as woollens silk garments and nylon stockings delicate embroidered fabrics laundry with metal accessories and items such as sleeping bags in the dryer Laundry made of delicate and valuable fabrics as well as lace curtains can be creased Do not dry them in the dryer Do not dry items made of hermetic fibres such as pillows and quilts in the dryer Laundry made of foam or rubber will be deformed Do not dry laundry containing rubber in the dryer Do not dry laundry exposed to petroleum oil combustible or explosive agents in the dryer even if they are washed beforehand Overly wet laundry or laundry with dripping water must not be put into the dryer Items cleaned or washed with gasoil fuel oil dry laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor e Do not dry items cleaned with industrial A Consider the information in the chemicals in the dryer Programme Selection
13. dryer Damage to the dryer can result if metal reinforcements come loose during drying Check all garments for forgotten lighters coins metal pieces needles etc before loading At times when your dryer is not in use or after the laundry is taken out following the completion of drying process turn off by using the On Off button In cases when the On Off button is on while the dryer is energized keep the door of the dryer closed Intended use This product has been designed for domestic use It should not be used for other purposes Use the product only for drying laundry that are marked accordingly Dry only those articles in your product that are stated in this manual This product is not intended to be used by persons with physical sensory or mental disorders or unlearned or inexperienced people including children unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product Children s safety EN Electrical appliances are dangerous for the children Keep children away from the machine when it is operating Do not let them tamper with the machine Packaging materials are dangerous to children Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives Do not allow children sit climb on or enter in the product Children should be supervised to ensure that they do not pla
14. e shirts in a more sensitive way so that they are less creased and ironed easily E Shirts may contain little amount of dampness at the and of the programme It is advised not to leave the shirts in the dryer eJeans You can use this programme to dry the jeans that are spun at high speeds in your washing machine E Review the relevant part of the programme table eDelicates You can dry at a lower temperature your very delicate laundry silk blouses fine underwear etc that are suitable for drying or laundry which is advised to be hand washed E It is recommended to use a cloth bag to avoid certain delicate garments and laundry from getting creased or damaged Take your garments immediately out of the dryer and hang them after the programme ends in order to prevent them being creased EN e Freshen Up Only ventilation is performed for 10 minutes without blowing hot air You can air your clothes that have been kept at closed environments for a long time thanks to this programme to deodorize unpleasant odours eTimer programmes You can select one of the 10 min 20 min 40 min and 60 min timer programmes to achieve the desired final drying level at low temperatures Programme dries at the selected time regardless of the drying temperature 15 EN Programme selection and consumption table Product Fiche Electric drier label Directive 95 13 EC Condensing Energy efficiency class Scale from A Highest Effi
15. e the child press lock To start a new programme after the programme is over or to interrupt the programme the child proof lock should be deactivated Press the same buttons for 3 sec again to deactivate the child proof lock g Child proof lock is deactivated when the machine is restarted by pressing the On Off button G Press the relevant buttons for 3 seconds to activate the child proof lock A long beep will be heard and the child proof lock will be activated A double beep will be heard if you press any button or turn the programme selection knob while the child proof lock is active Press the buttons for 3 seconds to deactivate the child proof lock Single beep will be heard and child proof lock will be deactivated AN A double beep will be heard if you turn the programme selection knob when the machine is running and the child proof lock is active If you deactivate the child proof lock without returning the programme selection knob to its previous position the programme will be terminated since the position of the programme selection knob is changed The drying light turns on and the machine remains on hold until a new programme is selected and the Start Pause Cancel button is pressed Finishing by cancelling the programme To cancel any selected programme Press Start Pause Cancel button for about 3 seconds The Filter cleaning Water tank and End Anti creasing warning lights will
16. ed service to replace the bulb Final Anti creasing LED flashes e The 2 hour anti creasing programme to prevent laundry from creasing might have been activated Turn off the dryer and take out the laundry Final Anti creasing LED is on e Programme has come to an end Turn off the dryer and take out the laundry The Drying LED flashes e A heat sensor failure has occurred Dryer ends the programme without heating Turn off the dryer and take out the laundry Call your authorized service e Filter cleaning LED is on e Filter might have not been cleaned Clean the cover filter Water comes out the cover e Clean the entire inner surface of the cover and door gasket Cover opens spontaneously e Push it until you hear that it is closed For products with a condenser Water tank warning LED is on e Water may be full Drain the water in the tank Condenser cleaning LED is on e Condenser might have not been cleaned Clean the filters in the condenser under the kick plate A Call an authorized service if the problem persists 23 EN 9 Guarantee Your new product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase What is covered Repairs necessary as a result of faulty materials defective components or manufacturing defect The cost of function
17. er after each drying process G You can clean the filter and filter area by vacuum cleaner To clean the filter 1 Open the loading door 2 Remove the cover filter by pulling it up and open the filter 3 Clean lint fibre and cotton by unravelling by hand or with a soft piece of cloth 4 Close the filter and place it back into its seat g Clogging may arise on the filter surface after using your machine for some time if this occurs wash the filter with water and dry it before using again G Clean the entire inner surface of the door and door gasket by wiping with a damp cloth f4 Maintenance and cleaning There are humidity sensors in your dryer that detect whether the laundry is dry or not To clean the sensor 1 Open the loading door of the dryer 2 Allow the machine to cool down if drying has been carried out 3 Wipe the metal sensors with a soft cloth dampened with vinegar and dry them G Clean metal sensors 4 times a year Never use solvents cleaning agents or similar substances when cleaning since these materials can cause fire and explosion Water tank The moisture in the damp laundry is taken from the laundry and condensed Drain the water tank after each drying cycle or during drying when Water tank warning light turns on 20 EN AN Condensed water is not drinkable Never take out the water tank when the programme is running If you forget to drain
18. ifficulty in obtaining service please contact the Customer Help Line Tel 0845 600 4911 For service under guarantee simply telephone the appropriate number below UK Mainland amp Northern Ireland Fridges amp Freezers 0845 600 4903 Electric Cookers 0845 600 4902 Gas amp Dual Fuel Cookers 0845 600 4905 Washing Machines amp Tumble Dryers 0845 600 4906 EN BEKO Beko plc Beko House Caxton Way Watford Hertfordshire WD18 8UF Tel 0845 6004911 Fax 0845 6004922 Email service beko co uk www beko co uk
19. ld it from its section marked with XX 3 Pull the nylon towards yourself and remove the transportation safety assembly 8 Make sure that you have removed the transportation safety assembly nylon styrofoam pieces before using the product for the first time Do not leave any items inside the drum Under counter installation e The product should never be operated without the top trim e Leave at least 3 cm of space between the side and rear walls of the product and the walls of the counter cupboard when installing your product under a counter or in a cupboard Mounting over a washing machine e A fitting device should be used between the two machines when installing above a washing machine The bracket must be installed by the Authorised Service Agent e Place the product on a firm floor If it will be placed on top of a washing machine the approximate weight of both machines may reach 180 kg when they are full Therefore the floor must be capable of carrying the load on it Connection to water drain In products equipped with a condenser unit the water accumulated during the drying cycle is collected in the water tank You should drain the accumulated water after each drying cycle You can directly send the accumulated water out through the water drain hose supplied with the machine instead of periodically draining the EN water collected in the water tank Connecting the water drain
20. ller The guarantee is given only within the boundaries of the United Kingdom and the Republic of Ireland The guarantee is applicable only to new products and is not transferable if the product is resold Disclaims any liability for incidental or consequential damages The guarantee does not in anyway diminish your statutory or legal rights 10 Service Please keep your purchase receipt or other proof of purchase in a safe place you will need to have it should the product require attention under guarantee You should also complete the details below it will help us assist you when requesting service The model number is printed on the Instruction Booklet and the serial number is printed on the Rating Label affixed to the appliance Model No Serial No Retailer Date of purchase Republic of Ireland All Refrigeration 01 862 3411 All Cookers Washing Machines amp Dryers Tumble Dryers Dishwashers Before requesting service please check the trouble shooting guide in the Operating Instructions as a charge may be levied where no fault is found even though your product may still be under guarantee 25 Service once the manufacturers guarantee has expired If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreement document Otherwise please call the appropriate number above where service can be obtained at a charge Should you experience any d
21. o Get the best from y BEKO Condenser Sensor Dryer DCU 6130W DCU 6130S DCU 6130B Read this manual prior to initial operation of the product Dear Customer We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you very good results We advise you to read through this manual carefully before using your product and keep it for future reference This User Manual will e Help you use your machine in a fast and safe way e Read the User Manual before installing and starting your product e In particular follow the instructions related to safety e Keep this User Manual within easy reach for future reference e Please read all additional documents supplied with your product Remember that this User Manual is also applicable for several other models Explanation of symbols Throughout this User Manual the following symbols are used Important safety information Warning for hazardous situations with regard to life and property Caution Warning for supply voltage Caution Warning for fire hazard Caution Warning for hot surfaces Read the instructions BBEBEPE gt Useful information Important information or useful hints about usage This appliance s packaging material is recyclable Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose Your appliance also contains
22. o improve the quality of the product Figures in this manual are schematic and may not match your product exactly Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards Depending on operational and environmental conditions of the appliance values may vary 5 EN 2 Important safety instructions This section includes safety information that will help protection from risks of personal injuries or damages Failure to follow these instructions shall cause any warranty to become void General safety Never place the machine on a carpet covered floor otherwise lack of airflow beneath the machine may cause electrical parts to overheat This will cause problems with your machine If the power cable or mains plug is damaged you must call Authorised Service Agent for repair The product should not be plugged in during installation maintenance and repair works Such works should always be made by the technical service Manufacturer shall not be held responsible for damages arising from processes carried out by unauthorised persons Connect the product to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table Operate your product at temperatures between 5 C and 85 C Do not use electrical devices in the product Do not connect the air exit of the product to the exit ducts which are used for
23. only be carried out by an authorised agent Risk of electric shock Important Fitting a different plug As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug proceed as follows 1 Connect the green yellow or green earth wire to the terminal in the plug marked E or with the symbol or coloured green and yellow or green 2 Connect the blue neutral wire to the terminal in the plug marked N or coloured black 3 Connect the brown live wire to the terminal in the plug marked L or coloured red With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box If in doubt contact a qualified electrician Green and yellow or green Blue or black Brawn ered Washer dryer combination Do not stack washing machine on top of the tumble dryer This would damage both appliances and guarantees would become void It is also unsafe to stack an appliance on top of another without using a suitable and approved stacking kit obtained from the specialist retailers 10 EN B Initial preparations for drying Things to be done for energy saving Make sure that you operate the product at its full capacity but pay attention to not exceeding it Spin your laundry at the highest speed possible when washing them Thus the drying time is shortened and energy consumption is
24. ording to the model of your dryer Filter cleaning A warning light will turn on to remind filter cleaning after the programme finishes If the filter cleaning warning light lights up continuously please refer to Suggested solutions for problems Water tank Warning light starts flashing when the tank is filled with water The dryer stops operating if the warning light turns on when a programme is running Drain the water in the water tank to restart the dryer Press Start Pause Cancel button to start the programme after you have emptied the water tank The warning light turns off and the programme resumes operating Starting the programme 1 Press Start Pause Cancel button to start the programme 2 Light of the Start Pause Cancel button will turn on to indicate that the programme has started Progress of programme Progress of a running programme is shown through the programme follow up indicator At the beginning of every programme step the relevant indicator LED will light up and light of the completed step will turn off Drying Drying level will be illuminated during the whole drying process until the drying degree reaches iron dry Iron Dry Starts to illuminate when the drying degree reaches iron dry step and remains illuminated until the next step 17 Cupboard dry Starts to illuminate when the drying degree reaches Ready to wear
25. r connections of the product are in accordance with the instructions given in relevant chapters of this manual Disposing of packaging material Packaging materials are dangerous to children Keep packaging materials in a safe place out of reach of children Packaging materials of your product are manufactured from recyclable materials Sort and dispose of them in accordance with recycled waste instructions Do not dispose of them with normal domestic waste Transportation of the machine 1 Unplug the machine from the mains 2 Remove the water drain and vent connections if any 8 Drain water remaining in the machine completely before transportation Disposing of the old machine Dispose of your old machine in an environmentally friendly manner Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your machine Before disposing of your old machine cut off the power cable plug and make the loading door lock unusable to avoid dangerous conditions to children EN 4 Electrical Connection Make sure that you have an earthed power outlet socket rated at 13 amps minimum Attention If you use your dryer as built in the socket must be reachable after installation or a separate switch which can disconnect the two poles must be used in the installation Check for suitability For a permanent connection a master switch with at least 3mm contact clearance and minum
26. ried in the dryer Garments or pillows bolstered with rubber foam latex foam shower bonnets water resistant textiles materials with rubber reinforcement and rubber foam pads should not be dried in the dryer Do not use fabric softeners and anti static products unless they are recommended by the manufacturers of the fabric softener or the product This product must be earthed Grounding installation decreases the risk of electric shock by opening a path with low resistance for the electricity flow in case of a malfunction or failure Power cable of this product is equipped with a conductor and a grounding plug that allows for grounding the product This plug must be installed appropriately and inserted into a socket which is grounded in accordance with the local laws and regulations Do not install the product behind a door with a lock sliding door or a door that has a hinge against the hinge of the dryer Do not install or leave this product in places where it will be exposed to outdoor conditions Do not tamper with the controls Do not perform any repair or part replacing procedures on the product even if you know or have the ability to perform unless itis clearly suggested in the operating instructions or the published service manual Inside and exhaust duct of the product must be cleaned by the qualified service personnel periodically Wrong connection of grounding conductor of the product can cause electric shock
27. step and remains illuminated until the next step Final Anti creasing Iluminates when the programme comes to an end and anti creasing function is activated A If more than one LED light up or flash concurrently it means there is malfunctioning or a failure please see Solution suggestions for problems Changing the programme after it has started You can use this feature to dry your clothes under higher or lower temperatures after your dryer has started For example 1 Press and hold the Start Pause Cancel button for about 3 seconds to Cancel the programme in order to select Extra Dry programme instead of Iron Dry programme 2 Select the Extra Dry programme by rotating the programme selection button 3 Press Start Pause Cancel button to start the programme G Press Start Pause Cancel button for 3 seconds to cancel the programme or turn the programme selection knob in any direction to end the programme while the machine is running Water tank and filter cleaning warning lights turn on to warn the user when the programme is cancelled by pressing the Start Pause Cancel button for 3 seconds However the warning lights do not turn on when the programme is cancelled by turning the programme selection knob Only the drying light turns on and the machine remains in hold until anew programme is selected and the Start Pause Cancel button is pressed Child proof lo
28. that there are Bath towels no lighters coins metal items needles and Large tablecloths etc in their pockets or on any part of them Hand towels 350 e Fabric softeners and similar products must Gannon Approximate be used in accordance with the instructions weights g of the manufacturer of the relevant Blouses 150 products e All laundry must be spun at the highest spin Cotton shirts 300 speed that your washing machine allows Shirts 200 for the laundry type Cotton dresses 500 e Laundry may be tangled after washing Dresses 350 Separate your laundry before placing them into your dryer Jeans 700 e Sort your laundry according to their types Handkerchiefs 10 pieces 100 and thicknesses Dry the same type of T Shirts 125 laundry together E g fine kitchen towels and table cloths dry faster than the thick Loadi bath towels oaaing Correct load capacity e Open the loading door e Place laundry items loosely into the dryer e Push the loading door to close Ensure that no items are caught in the door 12 EN g Selecting a Programme and Operating Your Machine Control panel N 1 2 3 Oo 0 y o BE Oo oO Filter cleaning warning light Warning light turns on when the filter is full Programme follow up indicator Used to follow up the progress of the current programme Cancel audio warning Used to cancel the audio warning given at the end of
29. the exhaust fumes of the devices operating with gas or other types of fuel You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect Always clean the lint filter before or after each loading Never operate your dryer without the lint filter installed Do not allow fibre dust and dirt accumulation around the exhaust exit and at adjacent areas Power cable plug must be within easy reach after installation Do not use extension cords multi plugs or adaptors to connect the dryer to power supply in order to decrease the risk of electric shock 6 EN Do not make any changes on the plug supplied with the product If it is not compatible with the socket have a qualified electrician change the socket with a suitable one Items cleaned or washed with gasoil fuel oil dry laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor Do not dry items cleaned with industrial chemicals in the dryer Do not dry unwashed items in the dryer Items soiled with cooking oils acetone alcohol fuel oil kerosene stain remover turpentine paraffin and paraffin removers must be washed in hot water with plenty of detergent before being d
30. the programme On Off button Used to turn on and off the machine 13 EN O 5 Programme selection knob Used to select a programme 6 Start Pause Cancel button Used to start pause or cancel the programme 7 Water tank warning light Warning light turns on when the water tank is full Preparing the machine 1 Plug in your machine 2 Place the laundry in the machine 3 Press the On Off button GI Pressing the On Off button does not necessarily mean that the programme has started Press Start Pause Cancel button of the machine to start the programme Programme selection Decide the appropriate programme from the table below which includes drying temperatures in degrees Select the desired programme with the programme selection button Dry at high temperature only for cotton laundry Thick and multi layered laundry E g towels linens jeans are dried in a way that they do not require ironing before placing in the wardrobe Normal laundry E g tablecloths underwear are dried in a way that they do not require ironing before placing in the drawers Cupboard dry Normal laundry E g tablecloths underwear are dried in a way that they do not require ironing before placing in the drawers but more than those in the ready to wearoption Normal dry Normal laundry E g Shirts dresses are dried ready to be ironed E For further programme det
31. turn on at the end of this period for reminding purposes As the inside of the dryer will be excessively hot when you cancel the programme while the dryer is running activate the ventilation programme to cool it down 18 EN End of programme The End Anti creasing Filter cleaning and Water tank warning lights on the programme follow up indicator will turn on when the programme comes to an end The door can be opened and the machine becomes ready for a second cycle Press On Off button to turn off the dryer E Final step of the drying cycle cooling step is performed without heat application in order to keep the items at a temperature that would not harm them E A 2 hour anti creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out after the programme has come to an end E If you will not take the laundry out immediately do not stop the dryer before the drying process is complete G Clean the filter after each drying please see Filter cleaning Drain the water tank after each drying please see Water tank 19 EN Filter Cartridge Door Inner Surface Lint and fibres released from the laundry to the air during the drying cycle are collected in the Filter Cartridge G1 Such fibre and lint are generally formed during wearing and washing g Always clean the filter and the inner surfaces of the cov
32. um 13 A rating must be used Electrical requirements Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position Should the mains lead of the appliance become damaged or need replacing at any time it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent Warning This appliance must be earthed If the fitted moulded plug is not suitable for your socket then the plug should be cut off and an appropriate plug fitted The moulded plug on this appliance incorporates a 13A fuse Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used Do not forget to refit the fuse cover In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug Fuse covers are available from any good electrical store In order to avoid hazards damaged supply cord should be replaced by the manufacturer its service agent or similarly qualified people Built under installation This appliance can be installed under a worktop AN Undercounter installation without the top cover must
33. ving 11 Laundry suitable for drying in the Mangan ANA A 11 Laundry unsuitable for drying in the mMacNiNE erasa an sa a 11 Preparing laundry for drying 12 Correct load capacity 12 6 Selecting a Programme and Operating Your Machine 13 Control panel senin as 13 Preparing the machine 14 Programme selectiOn 16 Programme selection and consumption Auxiliary fUNGtION ooocooW WWW 17 Warning indicatOrS ooooooWoo 17 TIME delay nam dn Panas anna 17 Starting the programme 17 Progress of programme oo 17 Changing the programme after it has Started at ana a 17 Child proof NOC ena nenen 18 Finishing by cancelling the programme18 End of prograMMe oo 19 7 Maintenance and cleaning 20 Filter Cartridge Door Inner Surface 20 DEMSOF sn tea EEN 20 Water tank Loco Woo m 20 For the condenser oooooocoo 21 8 Suggested solutions for problems 23 9 Guarantee 24 What iS covered Wo Woo 24 What is not covered 24 Important NOTES ooooWoW 24 10 Service 25 Your Dryer Overview 1 Control panel 5 Rating plate 2 Kick plate opening tab 6 Fluff filter 3 Adjustable feet 7 Power cord 4 Kick plate 4 EN Technical Specifications EN Rated power input See type label Model code Type label is located behind the loading door Specifications of this appliance may change without notice t
34. y with the product Close the loading door when you leave the area where the product is located 3 Installation AN Prior to installation visually check if the product has any defects on it If so do not have it installed Damaged products will cause risks for your safety Appropriate installation location e Install the product in an environment which has no risk of freezing and is in a stable and level position e Operate your product in a well ventilated dust free environment e Do not block the air ducts in front of and under the product with materials such as long pile rugs and wooden plinths e Do not place your product on a long pile rug or on similar surfaces e Do not install the product behind a door with a lock sliding door or a hinged door which can strike the product e Once the product is installed it should stay at the same place where its connections have been made When installing the product make sure that the rear wall of it does not touch anywhere tap socket etc and also pay attention to install the product at a place where it will stay permanently A Do not place the product on top of the power cable e Keep at least 1 5 cm distance to walls of other furniture Removing the transportation safety assembly Remove the transportation safety assembly before using the product for the first time Open the loading door 2 There is anylon bag inside the drum that contains a piece of styrofoam Ho
Download Pdf Manuals
Related Search