Sencor SVC 8YL TIZIO vacuum cleaner
Contents
1. 8YL Tizio CLEANING AND MAINTENANCE Caution Before cleaning disconnect this appliance from the power source Changing the dust bag Replace the dust bag as soon as the full dust bag warning light comes on otherwise the air flow and the suction strength will be reduced Lid clip 4 Dust bag holder Dust bag collar Dust bag Open the vacuum cleaner filter area by pressing the lid clip while pulling it upwards at the same time Pull upwards to remove the holder together with the dust bag out of the vacuum cleaner Reinsert the holder together with a new dust bag into the vacuum cleaner Close the lid of the vacuum cleaner until you hear a click DUN gt e KNN Caution As a measure to protect the filtration and suction system of the vacuum cleaner it is not possible to close the filtration area lid if the dust filter with the frame are not inserted in the vacuum cleaner Copyright 2012 Fast R a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio Changing and cleaning the inflow micro filter Lid clip Space for the inflow micro filter with grill Grill of the inflow micro filter Inflow micro filter 1 Open the vacuum cleaner filter area by pressing the lid clip while pulling it upwards at the same time 2 In order to make space for removing the inflow micro filter pull the dust bag together with its holder upwards to take it ou2. cord is not touching a hot surface If the power cord of the appliance is damaged have it repaired by an authorised service technician to prevent causing a dangerous situation It is forbidden to use the appliance if it has a damaged power cord or plug Do not disconnect the power cord from the wall outlet by pulling the cord In no case should you attempt to repair the unit yourself do not make any amendments to it danger of electric shock Entrust all repairs and adjustments to a specialised company service Failure to do so will expose you to a danger of voiding the warranty policy Never use the appliance if you have wet hands or feet Only store and use the appliance away from flammable or volatile materials and solutions This appliance is designed for household use Do not use it in industrial surroundings or outdoors Do not use the appliance for purposes other than those intended Do not spray the appliance with water or any other liquid Do not pour water or any other liquids into the appliance Do not submerge the appliance in water or in any other liquid Make sure the appliance does not come in contact with water Never use the appliance near a bathtub wash basin or any other containers filled with water If you are not using your appliance disconnect the power cord from the power socket If you will not be using the appliance turn it off and disconnect the power cord from the wall outlet Prior to cleaning proceed in t
3. power cord is wound up Press the winding button and try out incorrectly to rewind the power cord again The speed control is not working The appliance is out of order Have the appliance repaired by technician only by a qualified technician The power cord starts to wind in The winding mechanism is out Have the appliance repaired when you do not required of order only by a qualified technician TECHNICAL SPECIFICATIONS Nominal U O o 220 240 V AC Nominal freqUengy T M PPP O io A 50 Hz S SLSNIE E o e ER EE 510 W Ns Pe i O EEEE EEEE 1800 W Maximum power IN Us its 2000 W Safety class with regard to electric shock prOtectiON ococcnonocococonnnnnononoconononononnnnonononononnnnnnnnnccnnnnnnninnnnnnnnnnnnos A011 po O esa des eee lt 69 dB A Length of the power A E o 0 o no 7m ODE NN A a caster nage a heaton eba da aku o Ro oo E aaa p oo oo ot 9 5m Dust bag capacity suomi sHeeamezn Nana noo o NO Nooo 2 51 Dimensions length x width x height zasacissidave di oz ran 438 x 313 x 229mm nn o o o ko 5 3kg The declared noise emission level of the appliance is 69 dB A which represents a level A of acoustic power with respect to a reference acoustic power of 1 pW EN 12 Copyright 2012 Fast R a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio Amendments to text and technical parameters are reserved INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING M
4. the hose do not step on it or forcefully bend it Do not use the vacuum if the hose is bent or damaged in any other way Do not move over the power cord with the vacuum cleaner EN 3 Copyright 2012 Fast R a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio 27 Never use the vacuum cleaner without having inserted the dust bag the inflow micro filter or the outflow H E P A filter 28 Do not place the vacuuming hose inlet nozzle or vacuuming accessories near to your eyes or ears 29 Vacuuming of some types of floors or floor surfaces can create a static electricity charge which is not dangerous for the user The manufacturer is not responsible for damages caused by incorrect use of this appliance or its accessories Such damages include food spoilage injuries burns scalding fire etc Copyright 2012 Fast CR a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio DESCRIPTION A START STOP button Full dust bag indicator Vacuum hose connection hole Handle Cover of the outflow H E PA filter Motor power output control Cord winding button Transport wheel Handle Sliding knob for air suction Telescopic tube 9 Clip for the telescopic tube G Floor inlet nozzle Flap position for vacuuming carpets 3 Flap position for vacuuming hard smooth floors Hose GD Accessory holder Stopper for the vertical par
5. ATERIALS Dispose of packaging material at a public waste disposal site DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product its accessory or packaging indicates that this product shall not be treated as household waste Please dispose of this product at your applicable collection point for the recycling of electrical amp electronic equipment waste Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health which could be caused as a result of improper liquidation of waste Please ask your local authorities or the nearest waste collection centre for further details The improper disposal of this type of waste may fall subject to national regulations for fines For business entities in the European Union If you wish to dispose of an electrical or electronic device request the necessary information from your seller or supplier Disposal in other countries outside the European Union If you wish to dispose of this product request the necessary information about the correct disposal method from local government departments or from your seller This product meets all the basic EU regulation requirements that relate to it Ch
6. Vacuum cleaner User s manual SENCOR SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio Before first use please read all instructions contained in this user s manual carefully even if you are already familiar with using similar products Only use this product in accordance with the instructions described in the user s manual Keep the manual for future use Save the original packaging including the internal packing material warranty card and proof of purchase receipt at least for the duration of the warranty If you need to ship this appliance pack it in the original cardboard box to ensure maximum protection during shipping or transport e g when moving or when you need to send this product for repair EN 1 Copyright 2012 Fast CR a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio CONTENTS IMPORTANT SAFETY NOTICE cove AAA OV ee do ROV V k b ba 2 DESCRIPTION OF THE VACUUM CLEANER ie sueca od cd botany k D eee o eee 5 VACUUM CLEANER ABM BILY 6 saa wits a EE EE DD POB E S OD AEH EG bt es 6 VACUUM CLEANER OPERATION OCH S E o be nr L o pa o 6 USING THE UNIVERSAL 3 IN 1 MINI NOZZLE 55 bod k VA eee eed dd b d k daka d b n hh bed b pl 7 VACUUM CLEANER STORAGE c dd do o on k oe ed dace ees ieee heed Ae bbe nd ns 8 CLEANING AND MAINTENANCE 053 dak bee athe R d ko oe he ede k eek Edd eS Se 9 FROUBLESHOOTING ZEME BE O O eee do 12 TECHNICAL SPECIFICATIONS o Peetu b
7. anges to the text design and technical specifications may occur without prior notice and we reserve the right to make these changes EN 13 Copyright 2012 Fast CR a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio EN 14 Copyright 2012 Fast R a s Revision 10 2012
8. h hie ew b db a AA An d d ee 12 DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT ozu a ba hee eee end bade Pea ee 13 INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS 13 EN 2 Copyright 2012 Fast R a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio IMPORTANT SAFETY NOTICE 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Carefully unpack the product and take care not to throw away any part of the packaging before you find all the parts of the product This product may not be used by any persons including children with mental disabilities weak strength or by inexperienced persons unless they have been properly trained or schooled in the safe use of the product or unless they are properly supervised by a qualified person who is responsible for their safety Children must be supervised to ensure that they do not play with the product Before connecting this product to the socket outlet make sure the voltage stated on the label of the product corresponds to the voltage in your wall socket Never use accessories which have not been supplied with this product or which are not designed for this product Do not place the power cord near hot places or sharp objects Do not place heavy objects on the power cord Position the power cord so that it will not be stepped on or tripped over Make sure the power
9. he same manner Never leave the appliance switched on without supervision In order to avoid deformation of the plastic components of the vacuum cleaner or to prevent it from catching on fire do not expose the vacuum to direct sunlight do not place it close to heaters open fires or other sources of heat and do not leave the vacuum cleaner operating for too long if the air inflow vent is blocked Use extra care if the appliance is used near children Always keep the appliance out of the reach of children If the appliance is being used do not block the air inflow and outflow vents Blocked air vents can cause overheating and motor damage Vacuuming the below mentioned objects can damage your appliance or cause injuries to the operating person e wet floor water or other liquids e any type of sharp objects such as broken glass or ceramics needles pins etc e burning cigarettes or smouldering compounds matches or any other flammable or volatile liquids e g gasoline paint thinners etc e flour cement plaster i e dust from holes drilled in walls In order to avoid damaging furniture or injuries to persons hold the power cord in your hands as it winds up Do not vacuum larger pieces of paper or plastic bags They may easily clog the pipe or hose In the event that the vacuum cleaner becomes clogged for any reason turn it off by disconnecting it from the power socket and clean out the pipe or hose In order to avoid damage to
10. in Attention Never insert the filters back into the vacuum cleaner if they are wet or damp Always wait until they are thoroughly dry Cleaning your vacuum cleaner To clean the outside parts of the appliance use a fine cloth dipped in lukewarm water Do not use aggressive cleaning agents paint thinners or solvents Using these solutions could damage the surface of the appliance EN 11 Copyright 2012 Fast CR a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio TROUBLESHOOTING Before you decide to contact an authorized service centre please read these following tips in the troubleshooting chart Problem Possible cause The motor will not start The power cord is not firmly inserted in the socket The wall power outlet is damaged The vacuum cleaner is not Recommended action Insert the plug firmly into the power outlet Inspect the power outlet Turn the appliance on switched on The suction output is insufficient The appliance is clogged Remove the blockage or foreign object Clean the dust filter Clean the filter The dust filter needs cleaning The filter is clogged The power cord is not wound in The power cord may have Hold the power cord during the completely slipped down from the winding winding Apply slight tension pulley during winding by pulling the power cord back to the power cord during the winding process The power cord cannot be pulled The
11. king position Stopper for the horizontal parking position Clip Hose end Vacuum hose connection hole Vacuum power control Cord winding button Transport wheel START STOP button Cover of the outflow H E P A filter Horizontal parking position Power cord co OOOO W EN 5 Copyright 2012 Fast R a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio Handle Vertical parking position Front wheel mechanism Motor suction inlet for the event of an overload Transport wheel ASSEMBLY Inserting the hose into the air suction hole on the vacuum cleaner Press both the safety buttons on the end of the hose end and insert the hose end into the air suction opening on the vacuum cleaner until you hear a click The hose is now secured in correct position Attach the holder to the telescopic tube Make sure to place the holder with the hose on the wider part of the telescopic tube Attach the floor inlet nozzle to the telescopic tube Make sure the floor nozzle is attached the narrower part of the telescopic tube Adjust the length of the telescopic tube Adjust the length of the telescopic tube as follows Move and hold the button on the tube forward as shown the by arrows and adjust the length of the tube as reguired Then release the button and move the tube
12. ming upholstery window curtains etc e If the hose holder becomes blocked when vacuuming disconnect it from the telescopic tube and also disconnect the hose from the vacuum cleaner body Then place the holder inside the suction hole on the vacuum cleaner body and vacuum out the stuck dirt M Temporary interruption of the vacuuming process If you want to stop vacuuming for a short time you may use one of the parking positions e for the horizontal parking position use the stopper at the end of the floor nozzle e forthe vertical parking position use the stopper on the telescopic tube Attention Do not move the vacuum cleaner from place to place if the hose is in the parked position It may break off or the lugs for the floor nozzle or telescopic tube may break off USING THE UNIVERSAL 3 IN 1 MINI NOZZLE Brush nozzle Clip Rotating upholstery nozzle Slot nozzle To use this nozzle place one of its ends depending on the type of use described later on to the end of the telescopic tube instead of the floor nozzle For increased comfort and improved handling you can place it directly on to the handle fig A The universal 3 in 1 mini nozzle has multiple uses You can use it as a brush nozzle upholstery nozzle or slot nozzle EN 7 Copyright 2012 Fast CR a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio Access the slot nozzle by pressing clip DB and slidi
13. ng in the brush nozzle The slot nozzle fig DG is used for vacuuming narrow cracks and other hard to reach places e g windows corners bookshelves the space between mattresses upholstery etc By turning the upholstery nozzle fit D you can use it for vacuuming hard to reach places ry Tip Q If you use the universal 3 in 1 nozzle very often you can place it with the upholstery attachment end on to the specially shaped holder on the telescopic tube Ending the vacuuming process When you finish vacuuming switch the vacuum cleaner off by pressing the START STOP button and then disconnect the power plug from the socket To wind the power cord back to the vacuum cleaner press and hold the winding button with one hand Hold the cord with your other hand to protect the vacuum cleaner input area from damage w Tip Q If the winding process stops and part of the power cord is still outside release the winding button and pull the cable out again by about 50cm and press the winding button again and repeat the winding process Carrying your vacuum cleaner You can use the handle fig AG to hold and carry the vacuum cleaner STORAGE OF VACUUM CLEANER Before storage you can disassemble your vacuum cleaner to the individual parts or you can store it assembled with the telescopic tube locked in one of the parking positions Copyright 2012 Fast CR a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC
14. slightly forward until you hear a click The telescopic tube is now securely fixed in position USING YOUR VACUUM CLEANER Connecting your vacuum cleaner to the electrical power grid Pull the plug attached to the power cord out from the vacuum cleaner until the desired length of the cord is out of the appliance Insert the plug into a power socket Caution Yellow marking on the power cord warns that the power cord is close to its end Do not pull the cord further than the red marking Adjusting the floor inlet nozzle according to the floor surface You may set the inlet nozzle according to the floor surface by adjusting the inlet flap e f you want to vacuum carpets close the bristles of the inlet inside the inlet nozzle by turning the flap accordingly e f you want to vacuum hard and smooth surfaces move the bristles out of the nozzle by turning the flap accordingly Copyright 2012 Fast CR a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio Turning your vacuum cleaner on and off To switch your vacuum cleaner on or off press the START STOP button on the vacuum cleaner body Adjusting the suction strength The suction strength may be adjusted by moving the rider on the vacuum cleaner body small range or by the moveable rider on the hose handler ex Tips G e Use the maximum suction strength when vacuuming carpets or floors with a hard surface Use the reduced strength when vacuu
15. t of the vacuum cleaner 3 Pull upwards to remove the inflow micro filter and its grill Pull to remove the outflow H E PA filter and take it out 4 If the inflow micro filter is slightly soiled it is possible to wash it under running lukewarm water If it is more heavily soiled then replace it with a new one it is included inside every dust bag pack 5 Place the inflow micro filter together with the grill back in its place 6 Reinsert the dust bag together with its holder 7 Close the lid of the vacuum cleaner until you hear a click EN 10 Copyright 2012 Fast CR a s Revision 10 2012 Vacuum cleaner SVC 8GR SVC 8RD SVC 8VT SVC 8YL Tizio Changing and cleaning the outflow H E P A filter with the outflow micro filter Outflow H E P A filter Space for the outflow H E P A filter with protective grill Protective grill Protective grill clips Outflow micro filter 1 To open the filtration space G press both the protective grill clips G simultaneously while pulling upwards 2 Take the outflow H E PA filter G and the outflow foam filter G out of the filtration space GO 3 Ifthe filters are slightly soiled it is possible to wash both of them under running lukewarm water In the case of heavy soiling replace them with a new one 4 Place both filters back in the filtration space 5 Return the protective grill GG and close the filtration space ensuring that you hear both clips G click
Download Pdf Manuals
Related Search