Ryobi RPD800-K
Contents
1. have the switch on invites accidents Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts If devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used Use of dust collection can reduce dust related hazards 4 POWER TOOL USE AND CARE a Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was designed Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the plug from the power source and or the battery pack from the power tool before making any adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or2. these instructions to operate the power tool Power tools are dangerous in the hands of untrained users Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the 1 power tool repaired before use Many accidents are caused by poorly maintained power tools f Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control g Use the power tool accessories and tool bits etc in accordance with these instructions taking into account the working conditions and the work to be performed Use of the power tool for operations different from those intended could result in a hazardous situation 5 SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained DRILL SAFETY WARNINGS a Wear ear protectors when impact drilling Exposure to noise can cause hearing loss b Use auxiliary handle s if supplied with the tool Loss of control can cause personal injury c Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord Cutting accessory contacting a live wire may make exposed metal parts of the power tool live
3. CIFICATIONS Model Voltage Input No load speed Blows per minute Impact rate Chuck capacity Drilling capacity in wood in metal in masonry Weight According to EPTA procedure 01 2003 RPD800 230 V 50 Hz 800 W 0 3 000 min 0 51 000 min 13 mm 34 mm 13 mm 16 mm 1 8kg Techtronic Industries Australia Pty Ltd Level 1 660 Doncaster Road Doncaster VIC 3108 Australia Techtronic Industries New Zealand Ltd 18 26 Amelia Earhart Avenue Mangere Auckland 2022 New Zealand 20130829
4. ING The product should never be connected to a power supply when you are assembling parts making adjustments cleaning performing maintenance or when the product is not in use Disconnecting the product will prevent accidental starting that could cause serious injury WARNING When servicing use only identical replacement parts Use of any other parts may create a hazard or cause product damage m Avoid using solvents when cleaning plastic parts Most plastics are susceptible to various types of commercial solvents and may be damaged by their use Use clean cloths to remove dirt carbon dust etc A WARNING Do not at any time let brake fluids gasoline petroleum based products penetrating oils etc come in contact with plastic parts They contain chemicals that can damage weaken or destroy plastic m Electric tools used on fiberglass material wallboard spackling compounds or plaster are subject to accelerated wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings brushes commutators etc Consequently we do not recommend using this tool for extended work on these types of materials However if you do work with any of these materials it is extremely important to clean the product using compressed air A WARNING Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust If oper
5. ORIGINAL INSTRUCTIONS RYORI Percussion Drill G RPD800 Important It is essential that you read the instructions in this manual before operating this machine Subject to technical modifications WARNING Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool 1 WORK AREA SAFETY a b Keep work area clean and well lit Cluttered or dark areas invite accidents Do not operate power tools in explosive atmospheres such as in the presence of flammable liguids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders away while operating a power tool Distractions can cause you to lose control 2 ELECTRICAL SAFETY a Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded Do not expose power tools to rain or w
6. and could give the operator an electric shock d Hold power tool by insulated gripping surfaces when performing an operation where the fastener may contact hidden wiring or its own cord Fasteners contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock e Wear safety goggles to protect your eyes from flying particles and splinters Additional safety warnings WARNING The product is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety Children should be supervised to ensure that they do not play with the product a When working on walls ceilings or floors avoid hitting electrical wiring and gas or water pipes b We recommend the use of a residual current device with a residual current rating of 30 mA or less INTENDED USE a Drilling in all types of wood b Drilling in metals steel brass aluminum sheets stainless steel and pipe do not use impact drilling on these materials c Drilling in masonry stone and masonry use impact drilling wall tiles use ordinary drilling first then impact drilling Do not use this product in any way other than those stated for intended use MAINTENANCE WARN
7. ation is dusty also wear a dust mask Safety m Ifthe power supply cord is damaged it must be replaced only by the manufacturer or by an authorized service center to avoid risk Contact authorized service center m For greater safety and reliability all repairs should be performed by an Authorised Ryobi Service Centre LUBRICATION All of the bearings in the product are lubricated with a sufficient amount of high grade lubricant for the life span of the product under normal operating conditions Therefore no further lubrication is required ENVIRONMENTAL PROTECTION Recycle raw materials instead of disposing of as waste The machine accessories and packaging should be sorted for environmental friendly recycling SYMBOLS Safety alert Dx Class II tool double insulation No load speed Wood Metal Masonry Chuck Capacity Impact Regulatory Compliance Mark RCM Product meets applicable regulatory requirements Please read the instructions carefully before starting the machine Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with your local authority or retailer for recycling advice gt lt gt 4 f amp amp gt B gt eb xar U Eh V O 2 O Getting started Q qu O Q Operation m wa D E PRODUCT SPE
8. et conditions Water entering a power tool will increase the risk of electric shock Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock If operating a power tool in a damp location is unavoidable use a residual current device RCD protected supply Use of an RCD reduces the risk of electric shock 3 PERSONAL SAFETY a Stay alert watch what you are doing and use common sense when operating a power Safety GENERAL POWER TOOL SAFETY WARNINGS tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Use personal protective equipment Always wear eye protection Protective equipment such as dust mask non skid safety shoes hard hat or hearing protection used for appropriate conditions will reduce personal injuries Prevent unintentional starting Ensure the switch is in the off position before connecting to power source and or battery pack picking up or carrying the tool Carrying power tools with your finger on the switch or energising power tools that
Download Pdf Manuals
Related Search