Thomson 85UZ8866 85" 4K Ultra HD 3D compatibility Smart TV Wi-Fi Silver LED TV
Contents
1. View detail Yellow Display the description of this programme if available Type filter Blue Programme guide filter for digital TV programmes e Press the blue button to display the programmes type and subtype lists e Navigate through the different types and subtypes using the navigation buttons on the remote control Select one or more types which you want to highlight from the Type list press OK to select or deselect A checkmark will appear to the left of the type when selected When you select a type all its subtypes will be selected accordingly Also you can select some desired subtypes without selecting any type first Press the blue button to exit the type and subtype list After filtering all your desired digital TV programmes will be highlighted Add schedule Option Press OPTION on the remote control to bring up the Schedule list menu For details on scheduled recording refer to the Schedule list section 3 Press GUIDE EXIT to exit the EPG and switch to the selected channel PVR Personal Video Recorder Allows you to record your favourite TV programmes Before you use the function connect a USB drive to the set first Note This feature is available only in selected products and due to specific TV network limitations and country technical requirements might not be available in product or place of installation This feature might also be blocked by TV network due to copyr2. Chapter 10 Other information Password in Parental Control The default password is 1234 You can change it to a new one The super password is 0423 If you forget your code enter the super password to override any existing codes Troubleshooting Please check the following list before requesting service There is no picture or sound e Make sure the power cord is properly inserted in the power outlet e Make sure the source type is set correctly e Make sure the antenna is properly connected e Make sure the volume is not set to minimum or the sound is not set to mute e Make sure the headphones are not connected e The TV may be receiving a signal other than from TV broadcasting stations Picture is not clear e Make sure the antenna cable is properly connected Consider whether your TV signal is being properly received Poor picture quality can occur due to a VHS camera camcorder or other peripheral being connected at the same time Switch off one of the other peripherals The ghost or double image may be caused by obstruction to the antenna due to high rise buildings or hills Using a highly directional antenna may improve the picture quality The horizontal dotted lines shown on the pictures may be caused by electrical interference e g hair dryer nearby neon lights etc Turn off or remove these Picture is too dark too light or tinted e Check the colour adjustment Check the bright
3. specially adapted Internet websites for your TV You can control the Apps with the TV remote control WARNING Configure the network settings before using Smart TV Slow responses and or interruptions may occur depending on your network conditions If you experience a problem using an application please contact the content provider e According to circumstances of the content provider an application s updates or the application itself may be discontinued Depending on your country s regulations some applications may have limited service or not be supported Access Smart TV Applications Apps 1 Select Smart TV in the main menu and press OK to display the smart TV home page The App services depend on the country Select country press OK to enter then press A lt gt to select all the available country options and press OK to confirm Then select close and press OK to go back to the smart TV home page Shortcut operation Press Smart TV on the remote control to display the smart TV home page directly 2 Use A lt gt to select an App and press OK to enter 3 Internet browsing is available with Smart TV portal application It can be accessed via the icon in the portal or via the green button when TV portal page is displayed Note Since the connection with internet takes time it s recommended that you wait a few minutes to use the smart TV feature after activation of TV from standby EN 22
4. EN Using more of your TV formats of your files will determine whether or not they can be used When a USB drive is detected the TV enters the Media center menu directly To enter the Media center menu manually press MENU on the remote control and select Media Photo Use this function to display photos if available 1 Select Media gt Photo then press OK to enter the main file content browser 2 In the main file content browser use A W lt gt to select a photo or an inner file folder 3 Select an inner file folder press OK to enter a sub file content browser 4 Use A lt gt to select a photo in either main or sub file content browser press MENU to display the photo menu in folder mode Sort Sort folders and photos by modification Date or Name Edit Copy paste or delete a selected photo Parser You can select Recursive to display photos from all sub file folders 5 Select a photo press OK to watch and a slide show begins from the selected photo Press OK to pause the photo Press MENU to display the photo menu in the browser mode You can play pause or rotate the photo select different play modes and display effects etc 6 Press the related buttons on the remote control to perform the available functions shown on the function bar at the bottom of the TV screen Press the INFO button to show or remove the function bar Music Use this function to play back music if available 1 Sele
5. Using system standby cece 13 Network update 13 Common interface 2 c cece ee eee 13 Using the common interface module 13 Accessing common interface services 13 Software update cece cee eeceeeeeeeeeeeeee eens 13 Changing to Shop or Home mode 066 14 MHEG functio Measan en aa sugicnds 14 Viewing photos playing music and watching videos from a USB storage device ceeeeeeeeee eee 14 Photo Music Video DivX video Time shift Reset shop Customising the input settings Using Electronic programme guide PVR Personal Video Recorder Schedule list Chapter 6 Network Network Connection recaian 18 Connecting to a wired network 18 Connecting to a wireless network 18 TV remote inaaianei care 19 Miracast enoia anniari inn diana 19 Chapter 7 DLNA Share amp See Connecting to your PC ou eee eeeeeeeeeeeeeeeeeene es 20 Enabling DLNA function 20 Adding media from your PC for sharing vw 20 DLNA QD DNCAUION ricirca iania 20 Chapter 8 HbbTV HIDDTV ACCESS nrnna a aaa 21 HbbTV deactivation iscissi arare innrens 21 Chapter 9 Smart TV Access Smart TV Applications Apps 22 Chapter 10 Other information Password in Parental Control 0 0eee 23 TPOUDIESHOOUNG sexsisscrsexesser pase iiien iiih 23 Television specifications 23 OSS NOVCE aiec eget Ned awed oe 2
6. buttons press the P buttons on the remote control or the corresponding buttons on the TV set to scroll through the channels N Watching connected devices Repeatedly press SOURCE on the remote control or OK on the TV set to toggle between TV and other input sources To resume TV viewing press any numeric button to enter the channel while P will cycle through all TV channels and other input sources Note Not all models have OK button on the set Volume Volume control press the V buttons on the remote control or the corresponding buttons on the TV set to increase or decrease the volume Sound mute press the button to temporarily mute the sound Press this button again or the V button to restore it Using TV menus 1 Press MENU to display the main menu Refer to Figure 3 Channels Source Picture Network Figure 3 2 Press A W lt 4 gt to select the desired item then press OK to open the corresponding submenu 3 In submenus use A V to select menu options use lt P gt to set functions or change values Use OK to activate a setting Use OK gt to open the corresponding submenu 4 Press MENU to return to the previous menu 5 Press EXIT to close the menu Note Some options may not be available for certain signal sources Selecting menu language You can choose your preferred menu language following the instructions below EN 10 Press MENU to display the main menu Press A
7. OK P to enter and Channels select Scan and press OK gt Select Automatic search Refer to Figure 2 to start scanning then press OK P to display Automatic search 4 The search may take a few minutes During the process you can press MENU to abort halfway 5 Once the automatic search ends press MENU to return to the previous step or press OK to restart f Automatic search t wt Automatic update m your channel search Analogue manual scan A 6 After the automatic search channels are arranged Antenna manual installation s in a preset order If you wish to skip channels Clean channel list modify the preset order or rename channels select at Settings gt Setup gt Organiser and press OK P to Select enter Channel install Back Exit Figure 2 e Press OK to skip the country selection and enter the next step Or use lt P gt to reselect your country then press OK to enter Select Digital amp Analogue or Digital or Analogue then press OK gt to start the automatic search which relates to all DVB T digital and or analogue channels b If you have selected Z Cable e Press A V to select Channel install and press OK P to enter e Select Automatic search then press OK gt to display Automatic search EN 9 ysi 6u3 Chapter 4 Using your TV Accessing channels Using the numeric buttons press the corresponding numeric buttons on the remote control to access the channels Using the P
8. OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Third party services may be changed suspended removed terminated or interrupted or access may be disabled at any time without notice and TCL manufacturer of Thomson branded TVs makes no representation or warranty that any content or service will remain available for any period of time Content and services are transmitted by third parties by means of networks and transmission facilities over which TCL has no control Without limiting the generality of this disclaimer TCL expressly disclaims any responsibility or liability for any change interruption disabling removal of or suspension of any content or service made available through this device TCL may impose limits on the use of or access to certain services or content in any case and without notice Other information or liability TCL is neither responsible nor liable for customer service related to the content and services Any question or request for service relating to the content or services should be made directly to the respective content and service providers TCL declares that this TV is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC if delivered with WiFi access built in or USB dongle The official declaration of conformity may be found at www thomsontv eu in support area EN 24
9. lt gt to select Settings gt Setup then press OK to enter 3 Select Language and press OK P to enter 4 Press lt gt to select your desired language in the Language menu to display the menus Press EXIT to close the menu Chapter 5 Using more of your TV Setting up your favourite channels You can create a list of your favourite TV channels 1 Press LIST 2 Press the yellow button to enter Channel list selection Press A V to select the favourite list and press OK to enter 3 Press the blue button to start editing your favourite list Press A to scroll through the channel list and press OK to select or deselect it 4 Repeat this procedure to set up other favourite channels 5 Press LIST EXIT to exit Shortcut operation Press FAV on the remote control to directly enter Channel list selection Energy saving 1 Press MENU on the remote control and select Picture gt ECO Settings gt Energy Saving 2 Press lt P gt to select a desired power saving mode to achieve the desired power saving effect 3 Press EXIT to close the menu Shortcut operation Press ECO on the remote control to select a desired power saving mode directly Viewing TV using the 3D function not available for some models WARNING Some viewers may experience discomfort while viewing 3D TV such as dizziness nausea and headaches If you experience any such symptom stop viewing 3D TV remove your 3D glasses and r
10. on To avoid TV from falling please fasten TV to the wall by using necessary screws in Vesa wall mount holes clamps anchors to be bought separately Install TV near to the wall to avoid falling backwards Multi product user manual The features described in this manual are common to most models Some features may not be available on your TV and or your TV may include features that are not described in this user manual The illustrations in this manual may differ from the actual product Please refer to the actual product Dear Customer Z Products R Pb Battery Notice The sign Pb below the symbol for batteries indicates that this battery contains lead Important information Information for Users on Disposal of Old Equipment and Batteries European Union These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at their end of life Instead the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment recovery and recycling in accordance with your national legislation and the Directive 2012 19 EU 2006 66 EC and 2008 12 EC By disposing of these products correctly you will help to conserve natural resources and will help to prevent potential negative effects on the environment and human health wh
11. several digital services depending on the operator and EN Using more of your TV services you choose for example pay TV Contact your digital TV service operator for more information about services and terms Using the common interface module WARNING Switch off your TV before inserting a common interface module Be sure to follow the instructions described below Wrong insertion of a common interface module may damage both the module and your TV 1 Following the directions printed on the common interface module gently insert the module into the common interface slot on the TV 2 Push the module in as far as it will go 3 Turn on the TV and wait for the common interface function to be activated This may take several minutes Note Do not remove the common interface module from the slot Removing the module will deactivate the digital services Accessing common interface services After inserting and activating the common interface module press MENU on the remote control and select Settings gt Common interface This menu option is only available if the common interface module is correctly inserted and activated On screen applications and content are provided by your digital TV service operator Software update Note Do not switch off or unplug the TV until the upgrade is completed Press MENU on the remote control and select Settings gt Software update Press OK P to enter By network Enables you to dow
12. up the connection e PBC If your router has a PBC push button select PBC then press OK gt to enter Press the PBC push button on your router within 2 minutes after you press OK P again Your TV will automatically acquire all the network setting values it needs and connect to your network EN 18 5 To check the Internet connectivity follow the instructions in steps 3 and 4 of the preceding section Connecting to a wired network 6 To see the information on current connection follow the instructions in step 5 of the preceding section Connecting to a wired network TV remote This function allows you to turn a smart device into a sophisticated remote control providing more features than your normal TV remote control You can then control your TV through your smart device 1 Select Network gt TV Remote then press OK to enter the TV Remote menu You will see details for downloading the TV Remote application and other related information The following instructions are based on the example of a laptop 2 Download and install into the laptop the correct TV Remote application for the laptop 3 Make sure the laptop and the TV are in the same home LAN local area network or network segment 4 Run the TV Remote application on the laptop it will search and communicate with the TV automatically to enable the TV Remote functionality 5 Once the TV and the laptop are linked as described in step 4 you will be able to enj
13. 2009 125 EC in Home mode TV will be put into standby mode automatically if there is no operation in 4 hours This feature can be deactivated in the Settings gt Timer gt Auto standby menu MHEG function Some digital TV broadcasters offer dedicated digital text or interactive services for example BBC1 These services work like normal Teletext with the addition of number colour and navigation buttons Note MHEG and subtitles are mutually exclusive and cannot coexist on the same screen If Subtitle is set to On MHEG will not appear Please follow the instructions in the section Turning on off subtitles to set Subtitle to Off 1 Press the red button or TEXT on the remote control 2 Press A lt P to select or highlight items 3 Press OK to confirm or activate 4 Press one of the colour buttons to select an option 5 Press TEXT or EXIT to exit Viewing photos playing music and watching videos from a USB storage device Your TV is fitted with a USB connector that enables you to view photos listen to music or watch videos stored on a USB drive Supported file formats Photo JPEG Music MP3 Video AVI MPG MPEG TS DIVX MKV Note Some USB keys and USB products like digital cameras or mobile phones are not fully compatible with USB 2 0 standard so they may not work with the TV multimedia player Not all USB keys or devices are compatible with the USB function Not all above formats are recognised The encoding
14. 3 Chapter 1 Connections Connect the power and antenna To switch on TV after connecting power cord press or POWERI Note Position of power socket varies according to TV model On certain models you have to turn on the power switch first ysi 6u3 Notes Disconnect the power cord before connecting devices Position of TV ports varies according to TV model DVD player home theatre system PC Notes Before connecting a PC set the PC monitor refresh rate to 60Hz It is recommended to use as short as possible high quality HDMI cables to avoid possible interferences It is recommended to use 1m long or shorter VGA cable with ferrite beads in case VGA input is available in TV and TV is connected using VGA cable Maximum supported VGA resolution is 1024x768 60Hz LAN HDMI 3 ARC HDMI 2 AV VGA Satellite Antenna Cable adapter ut input a r n NI 28 Network connection Or use an HDMI connection 7 DVD player Home theater system ee EN 4 DVD recorder headphones cable receiver Note Excessive sound pressure from earphones and headphones can cause hearing loss d LAN HDMI 3 ARC HDMI2 AV VGA Satellite Antenna Cable adapter input input a i L bd GS Ag DVD reco
15. Important information Safety Ensure that your domestic mains supply voltage matches the voltage indicated on the identification sticker located at the back of your set Where the mains plug or an appliance coupler is used as disconnect device it shall remain readily operable On certain models the light indicator is located at the side of the TV set The absence of a light indication at the front does not mean that the TV set is fully disconnected from the mains To disconnect the TV set completely the mains plug must be pulled out The TV set s components are sensitive to heat The maximum ambient temperature should not exceed 35 Celsius Do not cover the vents at the back or sides of the TV set Leave sufficient space around it to allow adequate ventilation Install the appliance away from any source of heat fireplace etc or appliances creating strong magnetic or electric fields Moisture in rooms where the set is installed should not exceed 80 humidity Moving the set from a cold place to a warm one can cause condensation on the screen and on some components inside the TV set Let the condensation evaporate before switching the TV set on again WARNINGS This appliance is intended for domestic household use only and should not be used for any other application such as for non domestic use or in a commercial environment If the external flexible cable or cord of this product is damaged it shall be replaced by the manufac
16. K gt to enter 3 Use the alphanumeric buttons to enter the password 4 Press lt gt to select OK and press OK to confirm 5 The Initial setup menu appears Follow the related instructions Customising the input settings You can configure your TV according to the equipment you connect to it 1 Press MENU on the remote control and select Settings gt Setup gt Input settings 2 Press OK P to enter Input settings 3 Press A to select a connector your equipment is connected to 4 Press lt gt to select the type of apparatus attached to this connector 5 Press MENU to return to the Setup menu After configuring the selected source label will be displayed after the name of the related connector in the source list when pressing SOURCE on the remote control or OK on the TV set Note Not all models have OK button on the set Using Electronic programme guide EPG is an on screen guide that displays scheduled TV programmes You can navigate select view and record programmes 1 Press GUIDE on the remote control the Now and Next EPG menu will appear which allows you to get information about the current or next programme playing on each channel Navigate through the different programmes using the navigation buttons on the remote control 2 Use the colour buttons to view the 8 Days EPG Prev day Red List the previous day s EPG Next day Green List the next day s EPG Using more of your TV
17. To select desired power saving mode V To control the volume INFO To display programme information if available SMART TV To display the Smart TV homepage OPTION To display the function menu to perform certain operations to display the Teletext page in different modes MENU To access the main menu to return to the previous menu 3 To return to the previous menu EXIT To exit the menu structure or Teletext SLEEP To toggle among the sleep timer options PRE CH To return to the previous channel Colour buttons To select tasks or Teletext pages The red button can also be used for MHEG and HbbTV function LANG To select a sound type available for selected analogue TV programme to select an audio language available for selected digital TV programme K To select the previous photo music or video To start fast reverse a To stop playback _ po Jie OPTION ay 3D To toggle among the 3D input format options Not available for some models TV To access TV mode Alphanumeric buttons To enter channel numbers to enter a letter a digit or a symbol in some functions SOURCE To select connected devices To switch the sound off and back on P To change channels GUIDE To toggle the Electronic Programme Guide on or off only available for digital channels lt gt To navigate through the menus to set functions and change values A
18. ative works exploit or distribute in any manner 23 ysi 6u3 or medium any content or services displayed through this device YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY PERFORMANCE AND ACCURACY IS WITH YOU THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED TCL EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT AND SERVICES EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OF SATISFACTORY QUALITY FITNESS FORA PARTICULAR PURPOSE OF ACCURACY OF QUIET ENJOYMENT AND NON INFRINGEMENT OF THIRD PARTY RIGHTS TCL DOES NOT GUARANTEE THE ACCURACY VALIDITY TIMELINESS LEGALITY OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT THE DEVICE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR THAT OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR FREE UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL TCL BE LIABLE WHETHER IN CONTRACT OR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR AS A RESULT OF THE USE OF THE DEVICE OR ANY CONTENT OR SERVICE ACCESSED BY YOU
19. back and sides regularly Using solvents abrasive or alcohol based products could damage the TV set If an object or liquid enters the appliance unplug it immediately and have it checked by an authorized engineer Never open the appliance yourself since this may put you at risk or damage the appliance Hanging the TV set on the wall Warning This operation requires two people To ensure a Safe installation observe the following safety notes e Check that the wall can support the weight of the TV set and wall mount assembly e Follow the mounting instructions provided with the wall mount For certain models make sure to screw ysi 6u3 the hexagonal VESA wall mounting screw bosses and screws provided with the set into the nuts for the wall mount at the back of your set before your wall mounting The TV set must be installed on a vertical wall e Make sure to use only screws suitable for the material of the wall Make sure that the TV set cables are placed so that there is no danger of tripping over them All other safety instructions about our TV sets are also applicable here Placing the TV on a table and other surfaces Before setting up your television set make sure that the surface you want to put the set on can support its weight Do not place the set on an unstable surface e g moving shelf very edge of a unit and make sure that the front of the television set does not overhang the surface it is standing
20. channels in TV mode to all DVB C digital and analogue channels you want to update your channels If you select Digital then follow the same 1 Press MENU on the remote control and select process as above to start your automatic Settings gt Setup gt Language Press OK P to search relating to all DVB C digital channels enter and press lt gt to select your desired menu Ifyou select Analogue then press OK P language to start your automatic search relating to all 2 Press MENU to return to Setup press A V to analogue channels select Country then press lt P to select your c If you have selected amp Satellite country The TV installs and arranges channels Press A to select Channel install and according to your country At this step you will be press OK P to enter requested to enter your password Select Automatic search then press OK gt 3 Press A V to select Tuner mode then to enter You can select a proper satellite or an press lt gt to select Antenna or 4 Cable or operator Satellite Note X Satellite option may not be Press OK to go to the next step Before you available for certain models Then follow a or b start scanning you can select Satellite Setup or c below and press OK to select a satellite and press OK a If you have selected Antenna to edit the parameters of the selected satellite Press A V to select Channel install and Then with your desired options of Scan mode press
21. close the menu Notes 3D glasses from other manufacturers may not be supported All photo functions are disabled in 3D mode If you change to a different signal source or access Smart TV the 3D mode will be automatically disabled Some 3D modes may not be available depending on the input format of the 3D video source Supported 3D modes Analogue TV AV 2D to 3D Digital TV Top and Bottom Side by Side 2D to 3D Line interleave CMP HDMI USB Videos from the Internet Top and Bottom Side by Side 2D to 3D Line interleave Frame sequential 3D function in USB mode During the playback of a selected video from USB press MENU to display the video menu in the browser mode then select 3D Mode For more detail information refer to the above related descriptions Audio description Audio description refers to an additional narration track for blind and visually impaired viewers of visual media including television programmes and movies The description narrator talks through the presentation describing what is happening on the screen during the natural pauses in the audio and during dialogue if deemed necessary 11 ysi 6u3 You can use this feature if the current broadcast contains audio description 1 Press MENU on the remote control and select Sound then press OK to enter 2 Use A to select Audio Description then press OK to enter 3 You can turn the Audio Description function on or off in the Audio Des
22. cription menu 4 To adjust the volume for Audio Description press A to go to the next menu line then use lt gt to set the volume PAP function Use this function to display the pictures from different source inputs side by side Note that one window is for both analogue and digital TV inputs the other is for VGA HDMI and CMP inputs Note Not available for AV input on both windows For some models VGA input is not available 1 Press MENU to display the main menu 2 Select Picture and press OK to enter 3 Press A V to select the PAP option and press OK to enter 4 Press lt gt to turn on off PAP function 5 Select TV position press lt gt to reposition the TV window 6 Press EXIT to close the menu If you switch on the PAP function you can press lt gt to toggle the focus window When the focus is on the TV window the alphanumeric buttons and P work in TV mode When the focus is on the other window P switches available external sources Using subtitles You can enable subtitles for each TV channel Subtitles are broadcast via Teletext or DVB T DVB C digital broadcasts With digital broadcasts you have the additional option of selecting a preferred subtitle language Turning on off subtitles 1 Press MENU on the remote control and select Settings gt Subtitle 2 Press OK P to enter Refer to Figure 5 Subtitle Subtitle On Digital subtitle language t English Digital sub
23. ct Media gt Music then press OK to enter the main file content browser 2 Use Al lt gt to select a song in either main or sub file content browser in the same way as in photo display function press MENU to display the music menu in folder mode Sort Sort folders and songs by Name Genre Artist or Album Edit Copy paste or delete a selected song Parser You can select Recursive to display songs from all sub file folders 3 Select a song press OK to play and automatic playback begins from the selected song Press MENU to display the music menu in the browser mode You can play or pause the song select different play modes etc Show lyrics This option is available for the songs with lyrics Select it and use lt gt to turn on off lyrics synchronized display 14 Using more of your TV Audio only Select and press OK to listen to the DivX DivX Certified DivX Plus HD and music with the screen turned off Any key press associated logos are trademarks of Rovi Corporation will turn the screen on or its subsidiaries and are used under license 4 Press the related buttons on the remote control to perform the available functions shown on the Time access function bar at the bottom of the TV screen You can access the time from digital channels Video following the instructions below Use this function to watch videos if available 1 Press MENU on the remote control and 1 Select Media gt Video t
24. ed interactive services such as VOD Video On Demand or catch up TV Figure 7 source ETSI gives such an example a mernet Ss ia se Figure 7 To fully enjoy HbbTV you need to connect your TV to the Internet refer to section Network connection UB Notes You cannot download files to your TV with HbbTV function An application on HbbTV may malfunction temporarily depending on the circumstances of the broadcast station or application provider An application is only available for use on HbbTV when the TV network is connected to an external network The application may malfunction depending on the network conditions HbbTV access 1 Press MENU on the remote control then select Settings gt HbbTV mode EN 2 Press lt gt to select On 3 When you tune to a TV digital channel that offers HbbTV this will be signalled to you by an on screen indication generally a red button but other colour buttons may also be used Press the indicated colour button to open the interactive pages 4 Use Al lt gt and the colour buttons to navigate through the HbbTV pages and press OK to confirm HbbTV deactivation To avoid disturbances that may be caused by HbbTV broadcasting tests you can turn off the HbbTV function 1 Select Menu gt Settings gt HbbTV mode 2 Then press lt P gt to select Off 21 ysi 6u3 Chapter 9 Smart TV Allows you to enjoy Internet Applications Apps
25. elect an available language as primary language which relates to different initial Teletext pages Press MENU on the remote control and select Settings gt Teletext gt Digital teletext language Press lt P gt to select SPDIF type Connect the TV to an audio device through the SPDIF output To select a proper sound type for your SPDIF output press MENU on the remote control and select Settings gt SPDIF type If you select PCM the SPDIF output format is PCM regardless of the programme s sound format If you select Dolby D the SPDIF output format is Dolby Digital when the programme s sound format is Dolby Digital or Dolby Digital Plus or HE AAC PCM when the programme s sound format is MPEG If you select Off this turns off the audio output from the audio device connected to the SPDIF output 12 Note The options you may choose depend on the programme you are watching If you select PCM and the sound is ahead of the picture you can select SPDIF delay from the Settings menu and press lt gt to adjust the delay time to synchronize the sound with the picture T Link Use this function to search for CEC devices connected to the HDMI sockets in your TV and enable one touch play and one touch standby between CEC devices Enabling or disabling T Link 1 Press MENU on the remote control then select Settings gt T Link 2 Press lt gt to select On or Off if this function is turned on T Lin
26. eos which are stored on your PC Note If DLNA is switched on the TV will display the list of available DLNA servers which are available in local network Supported file formats Photo JPEG Music LPCM Video MPEG2 EN 20 Chapter 8 HbbTV HbbTV Hybrid broadcast broadband TV is a service offered by certain broadcasters and available only on some digital TV channels HbbTV delivers interactive television over both broadcast and broadband Internet These interactive features are added to and enrich the normal digital programmes and include services such as digital teletext electronic programme guide games voting specific information related to the current programme interactive advertising information magazines catch up TV etc There are two modes In the broadcast mode your TV does not need to be connected to the Internet You will be able to receive those HbbTV services broadcast at the same time as the programme being watched such as specific and additional information related to the programme An on screen indication for example red button will invite you to press the red button on your remote control to access the service Figure 6 source ETSI gives such an example Figure 6 In the broadband mode your TV has to be connected to the Internet In addition to the broadcast programme being watched you can access the same services as in broadcast mode and also many other Internet deliver
27. est Watching 3D videos too closely or for a long period of time may harm your eyesight A responsible adult should frequently check on children who are using the 3D function Do not use the 3D glasses for any other purpose than viewing 3D videos on a 3D TV Do not use the 3D function or 3D glasses while walking or moving around otherwise this may result in injuries due to running into objects tripping and or falling 1 Press MENU on the remote control and select Picture gt 3D navigation then press lt P gt to adjust 3D navigation to Manual 2 Press A V to select 3D in the Picture menu and press OK P to enter the 3D menu Refer to Figure 4 3 Wear the 3D glasses first then select 3D mode and press lt gt to select the desired 3D input format for the playing of 3D video EN 3D mode 2D to 3D 3D to 2D Off Depth of field Protrude Distance to TV Image safety L R switch Figure 4 4 Press A to select other menu options 3D to 2D Select Left or Right to display the image in 2D mode no 3D effect This function is deactivated when 3D mode is set to 2D to 3D or Off Depth of field Protrude Distance to TV Press lt gt to adjust to achieve a good 3D effect with the image Image safety Press lt P to select a desired option among Low Middle High and Off L R switch Select On or Off to adjust the 3D video between the left and right eyes for better 3D viewing 5 Press EXIT to
28. et make sure you have backed up the data in the drive to avoid the loss of your important data due to unforeseen malfunction The bigger the USB drive free memory for the PVR function the bigger the recording length If you want to change channel or signal source during recording store the recording data before changing the channel or source The set cannot play files normally if the parameters of the file exceed the limitations of the system the file format is not supported the file is damaged or the file cannot be decoded Do not disconnect the USB drive when the system is reading a file or transmitting data otherwise the system or the drive may be damaged Schedule list This function is used to perform scheduled recording 1 Press OPTION on the remote control and select Quick access gt Schedule list 2 Press OK to display the schedule list 3 To add a schedule into your schedule list press the red button first to display Schedule list Then Channel number use lt P to select the channel number Start date use the alphanumeric buttons to set the recording date Start time set the starting time of the recording Stop time set the stopping time of the recording Schedule type Set Reminder to be reminded that you can switch to the scheduled programme when the time you have set comes When time is out and you do not execute any operation the dialogue box will disappear and no further operation will be e
29. hen press OK to enter the select Settings gt Timer gt Clock gt Auto main file content browser synchronization 2 Use A lt gt to select a video in either main 2 Press lt P to select On or sub file content browser in the same way as in Diagnostics on digital TV channels photo display function press MENU to display the video menu in folder mode 1 Press MENU on the remote control and select Sort Sort folders and videos by Type Settings gt Setup gt Diagnostics modification Date or Name 2 Press OK P to display some signal information on Edit Copy paste or delete a selected video the current digital channel such as signal strength Parser You can select Recursive to display frequency etc videos from all sub file folders 3 Select a video press OK to watch and automatic Timeshift playback begins from the selected video Press Allows you to record the TV programme so that you MENU to display the video menu in the browser will not miss the favourite part even if you go out mode You can play or pause the video select Before you use the function connect a USB drive to different play modes screen modes and preset the TV first For the first time you should do the disk picture settings etc setup for the USB drive 4 Press the related buttons on the remote control Note This feature is available only in selected to perform the available functions shown on the products and due to specific TV function bar at the b
30. ible Connecting to your PC Make sure to set up a wired or wireless connection from your TV to a router first Then connect your PC to your router either through a network cable or wirelessly Also make sure to select Network gt Network settings gt Internet Connection then On and that your computer firewall won t block the connection Enabling DLNA function Select Network gt DLNA and set it to On Follow the steps in turn specified hereafter then you can enjoy recorded video image and music saved on your PC Adding media from your PC for sharing Install a DLNA media server on your PC The simple and familiar server you may install is Microsoft Windows Media Player 11 and 11 above Follow the instructions below to allow your TV to access the designated files on your PC 1 Open the Microsoft Windows Media Player 11 Select Library gt Media sharing Check the checkbox Share my media to Select the icon of the TV set connected to your PC Select Allow to allow the TV set to access your PC and select OK to enable the access Note Use the Settings button to customize your desired settings 2 Select Library gt Add to Library Select your personal folders or folders of other users that you can access for sharing Select Add and press OK to enable the addition DLNA application Select Media in the main menu and press OK to enter media center Then you can view photos listen to music or watch vid
31. ich could otherwise be caused by inappropriate waste handling of these products For more information about collection points and recycling of these products please contact your local municipal office your household waste disposal service or the shop where you purchased the product Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation Business users If you wish to dispose of this product please contact your supplier and check the terms and conditions of the purchase contract Other Countries outside the European Union These symbols are only valid in the European Union If you wish to dispose of these items please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical equipment and batteries This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety TCL Operations Polska Sp z 0 0 ul A Mickiewicza 31 41 96 300 Zyrardow Poland Email address zyeee tcl com Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice EN Contents Important INFOFMALION snosi arasan 1 Chapter 1 Connections Connect the power and antenna 0 66 4 DVD player home theatre sys
32. ight protection HD content recording protection Please use OPTION on the remote control to check if this feature is available in your product 1 Press OPTION on the remote control and select Quick access gt PVR Press OK P to enter 3 Press the red button to start recording the record file is put into a folder named after the channel number under the PVR folder in Media gt Video A lt gt to adjust the recording duration the green button to stop recording manually in normal operation the recording will stop automatically when the recording duration has passed 4 In recording PVR mini pane will also show on the screen to indicate the recording progress N EN 16 Using more of your TV 5 To watch the recorded programme exit PYR mode 4 Press A lt P to select Add then press OK to first and go to Media gt Video Select the folder add the schedule you set into your schedule list PVR then select the related record file Press OK 5 Press the red button to repeat above procedures to play It is the same if you record a digital radio to add another schedule programme 6 If you wish to edit or delete a schedule select it Notes and press OK to enter 7 Press EXIT to close the menu This feature is available only for non encrypted digital channels Even when CICAM CI or CI is inserted this feature is not available on encrypted channels Before you connect the USB drive to the s
33. ireless to select wireless mode connection 3 Press A V to select Wireless setting and press OK gt to enter 4 You can set up the wireless network connection in 3 ways a or b orc a Scan e Press A F to select Scan then press OK gt The TV will search all access points within range access points found by the TV will be displayed e Press A F to select an available access point then press OK P to connect the TV Notes If you select a protected access point you will have to enter the corresponding password Press OK on the remote control to display the virtual keyboard to enable you to enter the password This set is able to memorize the available access point which enables it to connect to the network even if you switch on your TV after power off b Manual Press A to select Manual then press OK gt you will be prompted to enter the correct SSID of an available wireless router to set up the connection c Auto If your AP Access Point supports WPS Wi Fi Protected Setup you can connect to the network via PIN Personal Identification Number or PBC Push Button Configuration WPS will automatically configure the SSID and WPA key in either mode Press A to select Auto then press OK gt to enter PIN Select PIN and press OK gt to enter Choose a random PIN code Make sure this code is installed on the AP For the procedures refer to your router manual Press OK again to set
34. k option will be available in the Quick access menu which you can enter by pressing the Option button on the remote control Using one touch play With one touch play pressing the play button on for example your DVD remote control starts playback on your DVD device and automatically switches your TV to the correct source displaying DVD content Using system standby With system standby pressing the button on for example your TV remote control switches your TV and all connected HDMI devices to standby mode Note The CEC functions depend on the devices connected and it is possible that some devices may not interoperate correctly when connected to this TV The user manual or the manufacturer of the problematic devices should be consulted for further information Network update Press MENU on the remote control then select Settings gt Network update Select On Off to enable or disable the Network update function When this function is on the TV will automatically update channels if your DTV service provider updates their DTV network When this function is off you need to run the channel search again to get new channels or remove unavailable channels if your DTV service provider adds or removes channels from their DTV network Common interface Encrypted digital TV channels can be decoded with a common interface module and a card provided by a digital TV service operator The common interface module may enable
35. l setup process Refer to Figure 1 Initial setup Language Please select your language English Bpnrapcxn Hrvatski e tina Dansk Nederlands Select Figure 1 1 Press A to select your language then press OK gt to enter the next step 2 Press A to select your country then press OK gt to enter the next step Press A V to select your location then press OK P to enter the next step Press A V to select to continue or skip network connection setup then press OK gt to enter the next step Note If you select France or Italy you will have to enter the Password setting menu here to set a password Use the alphanumeric buttons to enter a four digit number for your password 0000 is too simple to be set as your password Re enter the same code to confirm the password After that you will enter the next step automatically In this step you can only press lt to return to the previous step 3 Press A V to select your tuner mode gt Antenna or Z Cable or amp Satellite Note amp Satellite option may not be available for certain models Then follow a or b or c below a If you have selected 4 Antenna e Press OK P to enter e Press A F to select Digital amp Analogue or Digital or Analogue then press OK P gt EN e Press A to select Scan then press OK gt to start the automatic search for all DVB T digital and or analogue channels Note not all countries have Favorite Ne
36. ly To navigate through the menus to select menu options to switch to the previous or next photo song or video in USB function OK To confirm an entry or selection ZOOM ZOOM To select the picture format To operate in some Smart TV applications LIST To display the channel list FAV To bring up the Channel list selection menu TEXT To toggle Teletext on or off SUBTITLE To select a subtitle language available for selected digital TV programme gt i To select the next photo music or video gt gt To start fast forward Dil To start or pause playback e Recording button Getting started Important Batteries shall not be exposed to excessive heat such as sunshine fire or the like Remove batteries when the remote control is not to be used for a long time Batteries left in equipment may cause damage through deterioration and corrosive leakage invalidating the guarantee To protect the environment use local recycling facilities for battery disposal Dispose of used batteries according to the instructions CAUTION Risk of explosion if batteries are replaced by an incorrect type Replace only with the same or equivalent type recommended by the equipment manufacturer If the batteries in your remote control are run down you can use the buttons on your TV set They have the following functions For models with below buttons on the set For models with below buttons on the set TV
37. mode In menus TV mode In menus PR or PR A P A P A PR or PR V P y VOL lt 1 or VOL gt V gt VOL 1 or VOL lt V lt MENU or Features Short OK Short press OK or amp press Return Long press O Switch the TV on and off 1 When the power cord is connected the TV will be turned on directly or be in standby mode If the TV is in standby mode press the or POWER O button on the set or the button on the remote control to turn it on 2 To put the TV into standby mode press the or POWER O button on the set or the button on the remote control The TV set remains powered up but with low energy consumption 3 To switch the TV off unplug the mains plug from the mains outlet On certain models you have to turn on the power switch first EN 7 usiju Chapter 3 Installing channels Initial setup Initial setup involves selecting all the settings required to be able to search for and store all the analogue and digital channels you can receive Make sure that the television is switched on and follow all the steps in turn specified hereafter Note If the channel search retrieved only the analogue channels it could be caused by poor broadcasting and therefore is not covered by manufacturer warranty Manufacturers cannot be held responsible for lack of or poor broadcasting in some areas The first time you switch the set on the Initial setup wizard opens which guides you through the initia
38. ness setting e Check the sharpness function Remote control does not work e Check the batteries of the remote control e Make sure the remote sensor window on the TV front is not under strong fluorescent lighting Try to clean the remote sensor window on the TV front with a soft cloth If the above suggestions do not solve your technical issue please refer to the warranty card for service information Television specifications PAL SECAM BG DK I LL VHF UHF Cable Frequency synthesized TV Broadcasting Receiving channels Tuner type EN Operating Conditions Temperature 5 C 35 C 41 F 95 F Humidity 20 80 non condensing Storage Conditions Temperature 15 C 45 C 5 F 113 F Humidity 10 90 non condensing OSS Notice This product uses some software programs which are distributed under the Independent JPEG Group This product uses some software programs which are distributed under the Freetype Project This product uses some software programs which are distributed under the OpenSSL Project This product uses some software programs which are distributed under the zlib license This product uses UNICODE software programs which are distributed under IBM Open source license This product uses libpng software programs which are distributed under OSI Certified Open source license This product uses Expat Libcurl c ares software programs which are distributed under MIT license This product u
39. nload and install the latest software version from the Internet Make sure to set up a wired or wireless network connection first then select By network and press OK to enter When new version software is available a progress bar appears When the download finishes the TV will go black and upgrade the software Note Keep successful network connection during upgrade By channel Enables you to install the latest version of the software if available from the broadcast Use A to select By Channel and press OK gt to enter e Use lt gt to select Yes under Auto download to automatically download the latest software if available After the software has been downloaded successfully you will be prompted to decide if you want to install it right now If yes follow the on screen instructions to complete your installation You can also select to ignore the installation here 13 ysi 6u3 e Use lt gt to select No under Auto download to decline the automatic download Use A to select Manual Download and press OK gt if you wish to search manually for the latest software Follow the on screen instructions to complete During the search press OK EXIT to cancel or exit the process Changing to Shop or Home mode 1 Press MENU on the remote control and select Settings gt Location 2 Press lt gt to select your location Shop or Home 3 Press EXIT to exit Note According to the regulation of European Commission
40. only the timing of the time shift remains on the screen af Obtain your registration code e Press MENU on the remote control Select Settings gt DivX R registration e Press OK P and your registration code will be displayed Go to vod divx com for more information on how to complete your registration Deregister your TV you can press the red button or OK to access the If you wish to deregister your TV time shift menu Press MENU on the remote control Press the green button to fast backward or the e Select Settings gt DivX R deregistration yellow button to fast forward Press OK P and a message will guide you Press the blue button to quit the time shift function EN 15 ysi 6u3 Notes Before you connect the USB drive to the TV make sure you have backed up the data in the drive to avoid the loss of your important data due to unforeseen malfunction We recommend you use a USB drive with free capacity above 1GB and disk speed faster than 5 0MB sec The bigger the USB drive free memory for time shift the bigger the recording length If you change the channel in time shift mode a message prompts you to select Yes or No You can select Yes to exit the time shift function and execute the channel change Reset shop Allows you to reset the TV to factory default settings 1 Press MENU on the remote control and select Settings gt Setup then press OK to confirm 2 Select Reset shop and press O
41. ore starting the scanning you can also select Skip scan to skip the initial setup process In this case to search and store your channels you may do an automatic channel search by following the instructions in the next section Performing an automatic channel search 5 During the setup you can follow the hints available at the bottom of the screen to return to the previous step by pressing lt Or press EXIT to exit or interrupt the search halfway 6 In this step you can press OK to exit the initial setup The channels are arranged in a preset order If you wish to skip channels modify the preset order or rename channels select Setup gt Organiser and press OK P to enter In this step Installing channels you can also press lt to return to the previous e Press OK to skip the country selection and step enter the next step Or use lt P gt to reselect your country then press OK to enter Performing an automatic channel search If you select Digital amp Analogue then This section describes how to search and store press OK P to enter Select your scan channels automatically Instructions are for both mode if available and configure proper cable analogue and digital channels This may be done in information in the same way as in Initial any of the cases below setup Press A to select Scan and press you have selected Skip scan in the Initial setup OK gt to start your automatic search relating you see Please scan
42. ottom of the TV screen Press network limitations and country technical the INFO button to show or remove the function requirements might not be available in bar product or place of installation This feature DivX video might also be blocked by TV network due to copyright protection HD content recording not available for some models protection Please use OPTION on the ABOUT DIVX VIDEO DivX is a digital video remote control to check if this feature is format created by DivX LLC a subsidiary of Rovi available in your product Corporation This is an official DivX Certified 4 Press MENU on the remote control and select device that plays DivX video Visit divx com for more Settings gt Setup gt Time shift information and software tools to convert your files 2 Press lt P to select On to switch on the time shift into DivX videos es function then press EXIT to close the menu ABOUT DIVX VIDEO ON DEMAND This DivX 3 Press OPTION on the remote control and select Certified device must be registered in order to play Time shift then press OK to confirm purchased DivX Video on Demand VOD movies Follow the directions on the screen to do the setup After the disk setup is done press OPTION and select Time shift 6 Press OK to display the time shift menu Press the red button to pause the picture and begin the time shift Press the red button to play the recorded part When the time shift menu disappears and
43. oy the extra features of the TV Remote function 6 To quit the TV Remote function press EXIT on the remote control Miracast not available for some models Miracast allows you to share screen and sound of your device such as a smartphone or a tablet to your TV wirelessly i e without cables This makes it possible to view on your TV at the same time what your smartphone or tablet is showing For example you can launch a video on your smartphone and display it simultaneously on your TV or use your tablet as game controller with content displayed on the big screen of your TV Whenever you want to use Miracast you must first activate this function in your TV To do it follow the steps below 1 Press MENU on the remote control and select Network gt Miracast then press OK to enter You will see details for the Miracast function 2 Find the Miracast function in your device Different devices may have different names for this function 3 Then click the connection function on the device If connected successfully you will see on your TV screen what the device is showing Note TCL does not guarantee that the use of the Miracast function will be smooth or error free EN 19 Network since not all devices are compatible with the TV Miracast function ysi 6u3 Chapter 7 DLNA Share amp See Note This manual covers products with either Share amp See or DLNA function Share amp See is DLNA compat
44. rder Set top box Cable Blu ray Disc player HD game console amp HD camcorder Notes USB connectors are for data input from USB drives oam and for connecting other relevant USB devices where applicable All USB devices have to be directly connected to UU TV set without cable extenders In case extender U tay Disc is required it has to be as short as possible and pes equipped with ferrite beads onia ARC Audio Return Channel function is only supported on the HDMI port identified with ARC HD Camcorder Number of USB ports may vary pa Notes Not all connections available on all models The location of the power socket on the TV may vary according to TV model The positions and names of the function buttons and connectors on the TV may vary according to TV model EN 5 Connections W Chapter 2 Getting started Remote control functions ysi 6u3 Most of your television s functions are available via the menus that appear on the screen The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings Note You are recommended to use the full screen mode Do not use the display mode with black bars on both sides of the picture such as 4 3 for a long time otherwise the TV screen may be damaged permanently O Standby quit standby ECO
45. ses some software programs which are distributed under the GPL LGPL GPL software Linux Kernel Busybox SquashFS mtd utils e2fsprogs BlueZ Dbus Glib NTFS 3G Read Write Driver samba iconv Linux File System FTA LGPL software DFB SAWMAN ALSA Legal Statement of TCL manufacturer of this TV set Due to the various capabilities of products featuring the SmartTV Services as well as limitations in the available content certain features applications and services may not be available on all devices or in all territories Some features on SmartTV may also require additional peripheral devices or membership fees that are sold separately Please visit our website for more information on specific device information and content availability The services and availability of content through SmartTV are subject to change from time to time without prior notice All content and services accessible through this device belong to third parties and are protected by copyright patent trademark and or other intellectual property laws Such content and services are provided solely for your personal noncommercial use You may not use any content or services in a manner that has not been authorized by the content owner or service provider Without limiting the foregoing unless expressly authorized by the applicable content owner or service provider you may not modify copy republish upload post transmit translate sell create deriv
46. t sources will shine directly onto the screen The or POWER button on the TV set or the button on the remote control can be used to switch it on and put it into standby mode If you are not going to be watching the TV for a lengthy period of time switch it off completely by removing the plug from the mains power socket During thunderstorms we recommend that you disconnect the TV set from the mains and aerial so that it is not affected by electrical or electromagnetic surges that could damage it For this reason keep the mains and aerial sockets accessible so they can be disconnected if necessary Unplug the TV set immediately if you notice it giving off a smell of burning or smoke You must never under any circumstances open the TV set yourself as you run the risk of an electric shock in doing so TV screen The TV screen used in this product is made of glass Therefore it can break when the product is dropped or impacted upon by other objects The TV screen is a very high technology product giving you finely detailed pictures Occasionally a few nonactive pixels may appear on the screen as a fixed point of blue green or red This does not affect the performance of your product Care Use a glass cleaning product to clean the screen and a soft cloth and mild detergent to clean the rest of the set Important Using strong detergents alcohol based and abrasive products may damage the screen Dust the vents at the
47. tem PC enn DVD recorder headphones cable receiver 5 Blu ray Disc player HD game console amp HD CAMCONOSM aisis annosa a a E G 5 Chapter 2 Getting started Remote control functions neesseioeeeeer esenee 6 Switch the TV n and off oscalit 7 Chapter 3 Installing channels MMMItAL SETUP serros ea e adgoncweaheas 8 Performing an automatic channel search 9 Chapter 4 Using your TV Accessing channels 2 cseeceeeneeeeeeeeees 10 Watching connected devices 0 seeeeeeee 10 VOUM speet asiani ceca eae eed RE 10 Using TV menus 10 Selecting menu language eeeeeeeeee ees 10 Chapter 5 Using more of your TV Setting up your favourite channels 11 Energy SaviNg 2 sscaseccaauienagedenes conueeeenet ete ae 11 Viewing TV using the 3D function 11 Audio CESCHIPUON cicssecctcrntacncensonraananionaxeanaionans 11 PAP FUNCION sacs wees viesica vexed oeaiei 12 Using subtitles wes 12 Turning on off Subtitles neierens 12 Enabling subtitle languages on digital TV CHANNELS a2 sss ce cciessepcsivneesninen inaina inniy 12 Selecting a subtitle type on digital TV channels 12 Selecting decoding page language in Teletext 12 Digital Teletext language eeeeeeeeeeeees 12 SPDIPAY DO ciaociao nnii stems E a a iS 12 Weis eaa A E anede tates 13 Enabling or disabling T Link 13 Using one touch play sriiirorenisiriasiriseuai 13
48. title language 2nd English Subtitle type Normal e Select wow Back Exit Figure 5 EN Using more of your TV 3 Select the Subtitle option and press lt P to select On Off to turn on off subtitles Enabling subtitle languages on digital TV channels 1 Press MENU on the remote control and select Settings gt Subtitle gt Digital subtitle language 2 Press lt P gt to select a subtitle language as your preferred language 3 Press A V to select Digital subtitle language 2nd 4 Press lt P gt to select a secondary subtitle language 5 Press EXIT to close the menu Shortcut operation Press SUBTITLE on the remote control to directly select a subtitle language available for the selected digital TV programme Selecting a subtitle type on digital TV channels 1 Press MENU on the remote control and select Settings gt Subtitle gt Subtitle type 2 Press lt gt to select a subtitle type You can select Hearing impaired to display the hearing impaired subtitles with your selected language Selecting decoding page language in Teletext Press MENU on the remote control and select Settings gt Teletext gt Decoding page language Select a proper type of language in which Teletext will display Digital Teletext language On digital TV channels depending on the broadcaster you may be able to enjoy a service with multiple initial Teletext pages in different languages This function allows you to s
49. turer or his service agent or a similar qualified person in order to avoid a hazard Leave more than 10cm clearance around the television to allow adequate ventilation The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Batteries shall not be exposed to excessive heat such as sunshine fire or the like An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection To prevent the spread of fire keep candles or other open flames away from this product at all times WARNING To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions CAUTION Connect headphones with the volume set low and increase if required Prolonged listening through headphones at high volume settings can result in hearing damage EN Eye Fatigue When using this product as a computer monitor health and safety experts recommend short frequent breaks rather than occasional longer breaks For example a 5 10 minute break after an hour of continuous screen work is considered to be better than a 15 minute break every 2 hours Do not use the monitor against a bright background or where sunlight or other bright ligh
50. twork Selection function b If you have selected Z Cable e Press OK P to enter Press A F to select Digital amp Analogue or Digital or Analogue If you select Digital amp Analogue press OK gt to enter Then Press A to select Scan then press OK gt Press lt gt to select the scan mode if available Full or Advanced If you select Full press OK to start the automatic search for all DVB C digital and or analogue channels If you select Advanced use the numeric buttons to adjust the values for frequency symbol rate network ID and use lt P gt to select the modulation mode then press OK to start the search for all DVB C digital and or analogue channels If you select Digital press OK to enter then follow all the same steps as for Digital amp Analogue above to search for all DVB C digital channels If you select Analogue press OK gt to enter press A to select Scan then press OK gt to start the search for all analogue channels c If you have selected amp Satellite Press OK P to enter e Press A to select one operator and press OK gt e Press A F to select one satellite then press OK to configure the proper information related to this satellite Press OK to go back after finishing settings e Press gt to start scanning Note To prevent the channel setup process from being interrupted wait for the message indicating that the setup is complete 4 Bef
51. ty If it does not work follow step 4 below 4 Select Network gt Network settings gt IP setting then press OK P to enter the IP setting menu You can set Address type to Auto or Manual Select Auto if you want the TV to acquire and enter the needed IP address automatically Select Manual if you want to enter your IP address manually then e Press W to go to the first entry field Enter the IP address Subnet mask Default gateway Primary DNS and Secondary DNS values Use the alphanumeric buttons to enter numbers and the arrow buttons to move from one entry field to another Once Auto or Manual IP setting is completed press MENU to go back press A to select Connection test then press OK P to check the Internet connectivity again 5 If you want to see the information on current connection such as Interface Address type IP address etc select Network gt Network settings gt Information then press OK P Connecting to a wireless network To connect your TV to your network wirelessly you need a wireless router or modem and a Wireless LAN Adapter some TV models are equipped with an integrated LAN Adapter Connect your Wireless High Gain USB Adapter USB dongle delivered with your TV to your TV s USB 1 port 1 Press MENU on the remote control and select Network gt Network settings gt Internet connection Press lt gt to select On 2 Press A V to select Interface then set lt gt to W
52. xecuted e Set Record if available if you really want to start your scheduled recording when the time you have set comes When time is out and you do not execute any operation scheduled recording will start automatically Repeat type set different repeat modes for the recording EN 17 ysi 6u3 Chapter 6 Network Network connection You can set up your TV so that it can access the Internet through your local area network LAN using a wired or wireless connection Connecting to a wired network You can attach your TV to your LAN using cable in three ways You can attach your TV to your LAN by connecting the LAN port on your TV to an external modem using a Cat 5 cable e You can attach your TV to your LAN by connecting the LAN port on your TV to an IP Sharer which is connected to an external modem Use Cat 5 cable for the connection Depending on how your network is configured you may be able to attach your TV to your LAN by connecting the LAN port on your TV directly to a network wall outlet using a Cat 5 cable Note that the wall outlet is attached to a modem or router elsewhere in your house 1 Press MENU on the remote control and select Network gt Network settings gt Internet connection Press lt gt to select On 2 Press A to select Interface then set lt gt to Ethernet to select wired mode connection 3 Press A V to select Connection test then press OK to check the Internet connectivi
Download Pdf Manuals
Related Search