Leica Disto D410
Contents
1. Leica DISTO D410 82069 Insert batteries MCN To ensure a reliable use do not use zinc carbon batteries We recommend using high quality batteries Change batteries when battery symbol is flashing Operations Switching ON OFF Message Codes OFF If no key is pressed for 180 sec the device switches off au tomatically If the info icon appears with a number observe the instructions in section Message Codes Example 2 sec Leave actual func Undo last action tion go to default operation mode Device is turned OFF The orientation of the endpiece is automatically detected and the zero point is accordingly ad justed The minimum and maximum dis tance measured is displayed min max The last value measured is 3 displayed in the main line Stops permanent minimum maximum measuring Used to measure room diagonals maximum val ues or horizontal distance minimum values an Leica DISTO D410 82069 Operations Add Subtract 2 4 The next meas The next meas urementis added urement is sub to the previous tracted from the previous one Exit pointfinder viewscreen Leica DISTO D410 820691 aSettings Overview UNIT amp a Keypad lock Tilt calibration Favorites Illumination Offset Leica DISTO D410 82069 PA2. Responsibilities of the person in charge of the instrument To understand the safety instructions on the product and the instructions in the User Manual To be familiar with local safety regulations relating to accident prevention Always prevent access to the product by unauthorised personnel Safety Instructions Permitted use Measuring distances Tilt measurement Prohibited use Using the product without instruction Using outside the stated limits Deactivation of safety systems and removal of explanatory and hazard labels Opening of the equipment by using tools screwdrivers etc Carrying out modification or conversion of the product Use of accessories from other manufac turers without express approval Deliberate dazzling of third parties also in the dark Inadequate safeguards at the surveying site e g when measuring on roads construc tion sites etc Deliberate or irresponsible behaviour on scaffolding when using ladders when measuring near machines which are running or near parts of machines or instal lations which are unprotected Aiming directly in the sun Leica DISTO D410 820691 Hazards in use ZN WARNING Watch out for erroneous measurements if the instrument is defective or if it has been dropped or has been misused or modified Carry out periodic test measurements Particularly after the instrument has been subject to abnormal use and bef
3. lengths Approve value b and start meas urement Leica DISTO D410 82069 Move device slowly along the stake out line The distance to the next stake out point is displayed Approve value a eis ms Next stake missing up to P next 0 625 m out distance distance 0 625 m 30 240 m Adjust value b When approaching a stake out point to less than 0 1 m the instrument starts to beep The function can be stopped by pressing the CLEAR OFF button gp Functions N Pythagoras 2 point 2 A N 21 383 m 13 207 m Leica DISTO D410 82069 Aim laser at first Aim laser at second target The result is shown in the main line Pressing the measuring key for 2 sec in the function ac tivates automatically Minimum or Maximum measure ment We recommend to use the pythagoras only for indirect horizontal measuring For height measuring vertical it is more precise to use a function with the inclination measuring Technical Data Distance measurement Typical Measuring Tolerance 1 0 mm 1 16 Maximum Measuring 2 0 mm 0 08 in Tolerance Typical Range 150 m 500 ft Range at unfavourable 80 m 260 ft condition Smallest unit displayed 0 1 mm 1 32 in Power Range Technology yes 6 30 60 mm 10 50 100 m Smart Horizontal Mode laser poin
4. 2014 Radiation safety of laser products Leica DISTO D410 82069 Laser Class 2 products Labelling Do not stare into the laser beam or direct it towards other people unnecessarily Eye protection is normally afforded by aversion responses including the blink reflex Z WARNING Looking directly into the beam with optical aids e g binoculars telescopes can be A fil AG hazardous NZ 2 Complies with 21 CFR 1040 10 and 1040 11 except for deviations pursuant to Laser Notice No 50 dated June 24 2007 Z caution e O Looking into the laser beam may be ici ii hazardous to the eyes Model Leica DISTO D410 AM amp xk SWISS Technology 1 e e a by Leica Geosystems Description Value Wavelength 635 nm Subject to change drawings descriptions Maximum radiant output and technical data without prior notice power for classifiacation 0 95 mW Pulse repetition frequency 320 MHz Pulse duration gt 400 ps Beam divergence 0 16 x 0 6 mrad Leica Geosystems AG CH 9435 Heerbrugg Switzerland www disto com Leica Geosystems AG Heerbrugg Switzerland has been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality Systems ISO standard 9001 and Environ mental Management Systems ISO standard 14001 Copyright Leica Geosystems AG Heerbrugg Switzerland 2014 Original text 820691 EN Pat No WO 9427164 WO 98
5. Settings mt Distance units Switch between the following units Confirm setting Exit settings 0 00 1 32 Exit settings To switch ON repeat procedure A De Activate keylock Switch on with keylock To deactivate repeat procedure The keylock is active if device is switched off within 2 sec Leica DISTO D410 82069 8 PA Settings Calibration of tilt sensor Tilt Calibration Turn the device horizontally by 80 and place it again on absolutely flat surface Place device on absolutely flat surface After 2 sec the device 180 goes back to the basic mode MO Turn the device horizontally by 80 and place it again on absolutely flat surface Leica DISTO D410 82069 9 PA Settings X Personalized favorites 4 DIST Press selection key left or right Select favorite Function is setas Exit settings function favorite above the corresponding se lection key Confirm setting Exit settings Select brightness Leica DISTO D410 82069 Select your fa vorite functions for quick access Short cut Press 2 sec on a selection key in the measuring mode To save power re duce bright ness if not necessary Settings Al Offset Approve Select digit value An offset adds or subtracts a specified value automatically to or from all measurements This func tion allows tolerances to be taken into
6. beam inter rupted Repeat measurement Leica DISTO D410 820691 Care e Clean the device with a damp soft cloth e Never immerse the device in water e Never use aggressive cleaning agents or solvents Lifetime Manufacturer s Warranty Warranty coverage for the entire usage time of the product according to Leica Geosys tems International Limited Warranty Free of charge repair or replacement for all products that suffer defects as a result of faults in mate rials or manufacturing for the entire life of the product 3 Years no Cost Guaranteed service should the product become defective and require servicing under normal conditions of use as described in the user manual at no additional charge To receive the 3 years no cost period the product must be registered at www leica geosystems com registration within 8 weeks of the purchase date If the product is not registered a 2 years no cost period applies Safety Instructions The person responsible for the instrument must ensure that all users understand these directions and adhere to them Areas of responsibility Responsibilities of the manufacturer of the original equipment Leica Geosystems AG Heinrich Wild Strasse CH 9435 Heerbrugg Internet www disto com The company above is responsible for supplying the product including the User Manual in a completely safe condition The company above is not responsible for third party accessories
7. 18019 WO 0244754 WO 0216964 US 5949531 EP 1195617 US 7030969 US 8279421 B2 e when it has to be right Seica Geosystems
8. account The offset icon is displayed Exit settings G Reset RESET Second confirmation with selection keys Reset returns the instrument to the factory settings All custom ized settings and memories are lost Refuse Confirm Exit settings Leica DISTO D410 820691 frune Functions Overview Qvo ee I Prior A Sele Dance Mezuro Le Smart Honzonal Mode __ The selfrelease starts if OINA MENIS key is pressed Select release Confirm setting time Leica DISTO D410 82069 g Functions y Adjusting measuring reference tripod Ifdevice is switched off reference goes back to standard setting rear of the device Confirm setting If you use an original Leica DISTO adapter the reference does not need to be adapted to tripod thread Leica DISTO D410 82069 Distance is measured from the rear of the device standard setting Distance is measured from a Leica DISTO Adapter FTA 360 lock symbol perma nently Distance is measured from the tripod thread permanently Distance is measured from the front of the device lock symbol permanently gp Functions Switch between measurements Delete memory Use Up Down navigation keys to Short cut show more detailed results of the speci Take over value for fic measurement further actions Target surfaces Measuring errors can occur when measuri
9. n Pa uan m s af S a Pac ap Mi TE ew F g iy P a pr a T 1j 1 1 TILM A i te Leica DISTO D410 The original laser distance meter mom Min MEL fi ee i e when it has to be right Seica Geosystems Table of Contents Instrument Set up 2 Intmoduetoi sicegsscossesaestacooe sede 2 OOO eee oe eee 2 Basic measuring screen 3 Selection serech sese mercurii emen iere eee eee 3 Pointfinder Viewscreen 4 lise rt battehies eimi ene oritur et teh pe seid I ge ta 4 Operationi 1c sissriaiezoiosic iie 5 Switching ON OFF 5 Clear 5 Message Codes 5 Multifunctional endpiece E Permament Minimum Maximum measuring 5 Add Subtract lt nccnsscisctrespuecinstposei 6 Pointfinder Viewscreen 6 Settings nn 7 e I cC A 7 Distance units tas sintan S 8 Beep ON OFF 8 De Activate keylock 8 Switch on with keylock 8 Calibration of tilt sensor Tilt Calibration 9 Personalized favorites IO lluminati
10. ng to colourless liquids glass styrofoam or semi permea ble surfaces or when aiming at high gloss surfaces Against dark surfaces the measuring time in Aim active laser at target creases 40 8 Q z 5204 L x 7 0 032 p y Aim laser at 4 027 MF Z up to 360 and a transverse target tilt of 10 Leica DISTO D410 820691 gp Functions Area Aim laser at first target point Aim laser at sec ond target point The result is shown in the main line and the lt gt 0 228 m First distance measured value above Partial Measurements Painter function 3 910 m 7 Second distance Press or before starting the first measure ment Measure and add or subtract distanc lt gt 20 276 m Circumference es Finish with Measure 2nd length 24 352 MT Area Leica DISTO D410 82069 gp Functions Volume Aim laser at third target point Aim laser at sec ond target point Aim laser at first target point Use Up Down navigation keys to show more re sults lt 13 430 m Ceiling floor area amp 39 300 m Wall areas lt gt 16 164 m Circumference 5 744 m First distance 2 338m T Second distance 2 431 m Third distance 32 653 mel vue ey Leica DISTO D410 82069 gp Functions Hr Stake out Two different distances a and b can be entered to mark off de fined measured
11. on ss s sastasioneee zena IO Offset Reset PHILO oesi e reor Qeon dolia ica AM pbi i 12 OVENIEW esee icri dr ipai Reine ecd trees U tria 12 WR EE 12 Adjusting measuring reference tripod 13 Memory l4 Measuring single distance l4 Smart Horizontal Mode sse 14 Area 5 Volume l6 Stake out 7 Pythagoras 2 point 18 Technical Data oo eR e 9 Message Codes 20 Lalla 20 W arrani y sso iii 20 Safety Instructions 20 Areas of responsibility 20 Permitted use 21 Prohibited use 21 Hazards in use 21 Limits of use 21 Disposal 21 Electromagnetic Compatibility EMC 22 Laser classification 22 Labelling 22 Leica DISTO D410 820691 l Instrument Set up Introduction The safety instructions and the user manual should be read through carefully before the
12. ore during and after important measurements A CAUTION Never attempt to repair the product your self In case of damage contact a local dealer Z WARNING Changes or modifications not expressly approved could void the user s authority to operate the equipment Limits of use Refer to section Technical data The device is designed for use in areas permanently habitable by humans Do not use the product in explosion hazardous areas or in aggressive environments Disposal Z caution Flat batteries must not be disposed of with household waste Care for the environment and take them to the collection points provided in accordance with national or local regulations The product must not be disposed with household waste Dispose of the product appropriately in accordance with the national regu lations in force in your country Adhere to the national and country specific regulations Product specific treatment and waste management can be downloaded from our homepage Safety Instructions Electromagnetic Compatibility EMC Z WARNING The device conforms to the most stringent requirements of the relevant standards and regulations Yet the possibility of causing interference in other devices cannot be totally excluded Laser classification The device produces visible laser beams which are emitted from the instrument It is a Class 2 laser product in accordance with e 1EC60825 1
13. product is used for the first time The person responsible for the product must ensure that all f users understand these directions and adhere to them The symbols used have the following meanings LN WARNING Indicates a potentially hazardous situation or an unintended use which if not avoided will result in death or serious injury Z caution Indicates a potentially hazardous situation or an unintended use which if not avoided may result in minor injury and or appreciable material financial and environmental damage Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner Leica DISTO D410 82069 Overview Display BN On Measure Ew Ew NN linked to T _S symbols above Selection keys Pointfinder Viewscreen DD Navigation il EST N In screen T Return AL Equal Clear Off WX DISTO D410 Se Add Subtract Instrument Set up Basic measuring screen Status bar ERN 0 051 5 678 32 542 iw Favorites Selection screen Function N n DOD DEE function Leica DISTO D410 82069 3 Instrument Set up Pointfinder Viewscreen Zoom stage E P 1x Illumination adjustment with navigation keys left and right Lam Crosshair Aw Zoom 1x 2x 4x with navigation keys up and down Active function E __ N G Q Favorites
14. t at distances Measuring tolerance t 0 2 Range 360 General Laser type 635 nm lt mW Protection class IP65 dust tight and jet water protected Autom laser switch off after 90 s Autom power switch off after 180 s Battery durability 2 x AA up to 5000 measure ments 143 x 58 x 29 mm 5 6x2 28x 1 14 in Weight with batteries 198 g 6 37 oz Temperature range Storage Dimension H x D x W 25 to 70 C 13 to 158 F 10 to 50 C 14 to 122 F Operation Leica DISTO D410 820691 applies for 100 target reflectivity white painted wall low background illumination 25 C applies for 10 to 100 target reflectivity high background illumination 10 C to 50 C Tolerances apply from 0 05 m to 10 m with a confidence level of 95 The maximum tolerance may deteriorate to 0 1 mm m between 10 m to 30 m to 0 20 mm m between 30 m to 100 m and to 0 30 mm m for distances above 100 m applies for 100 target reflectivity background illumi nation of approximately 30 000 lux after user calibration Additional angle related devia tion of 0 01 per degree up to 45 in each quadrant Applies at room temperature For the whole operating temperature range the maximum deviation increases by 0 1 For accurate indirect results the use of a tripod is recommended For accurate tilt measurements a transverse tilt should be avoided Func
15. tions Distance measuring Min Max measuring Permanent measuring Stake out Addition Subtraction Area Volume Painter function area with partial measurem Pythagoras Smart Horizontal Mode Indirect height Memory Beep Illuminated colour display Multifunctional endpiece Pointfinder Viewscreen Personalized Favorites Timer yes yes yes yes yes yes yes yes 2 point yes 30 displays yes yes yes 4xZoom yes yes EN Message Codes If the message Error does not disappear after switching on the device repeatedly contact the dealer If the message InFo appears with a number press the Clear button and observe the following instructions No Cause Correction Hold the instrument without any transverse tilt 156 Transverse tilt greater than 10 162 Calibration mistake Make sure the device is placed on a absolutely horizontal and flat surface Repeat the calibration procedure If the mistake still occurs contact your dealer Perform measurement again 204 Calculation error 252 Temperature too high Let device cool down 253 Temperature too low Warm device up 255 Received signal too weak measuring time Change target surface e g white paper too long 256 Received signal too Change target surface high e g white paper 257 Too much back Shadow target area ground light 258 Measurement outside of measuring range Correct range 260 Laser
Download Pdf Manuals
Related Search