Liebherr SKESF 4240
Contents
1. condensate from forming This is normal The temperature is not cold enougn The door of the appliance is not properly closed Close the door of the appliance Insufficient ventilation Clear ventilation grilles The ambient temperature is too high Solution see 1 2 The appliance was opened too frequently or for too long Wait to see whether the appliance reaches the required temperature by itself If not please contact the after sales service see Maintenance The appliance is too close to a source of heat stove heater etc B Change the position of the appliance or the source of heat Vivivivi The interior light is not on The appliance is not switched on Depending on model and options Decommissioning Switch on the appliance The door was open longer than 15 min The interior light automatically switches off if the door has been open for about 15 min gt The LED illumination is defective or the cover is damaged A WARNING Risk of injury due to electric shock Live parts are located under the cover Have the LED interior light changed or repaired only by the customer service or by specialized personnel trained for the purpose A WARNING Danger of injury by LED lamp The light intensity of the LED illumination corresponds to laser class 1 1M If the cover is defective gt Do not look into the illumination with optical lenses from the immediate proximity T2. 3 130614 1085638 01 K KP KPesf SKes SKest EE Ar i J Operating instructions Upright refrigerator Appliance at a glance Contents 1 Appliance at a glance uuursnnunennnnnnonnnnennnnnennnnnenn 2 1 1 Description of appliance and equipmert 2 1 2 Range of appliance USE asana nennen enen 2 Ie CONO emeente den nese eee tere 3 1 4 External dimensions of the appliance 3 1 5 Saving energy enrnnennneenen vennen 3 2 General safety informatiOn naaar nennen 3 3 Controls and displays nana nnnenane nennen 4 3 1 Operating and control elements 4 3 2 Temperature display annae nennen neen 5 4 Putting into operation uununesennnnnennnnnennnnnnnnnnnenn 5 4 1 Transporting the applianc unne 5 4 2 Installing the applianC ce ecceeeeeeeeeeeeeeeeeeeeeens 5 4 3 Changing over the door hinges 6 4 4 Insertion into a row of kitchen units 7 4 5 Disposing of packaging nnnnnn ennn 7 4 6 Connecting the appliance nanne 8 4 7 Switching on the applianc nnn aneenn 8 5 COMMON MA E dennie eron nine 8 5 1 Food refrigeration enenneenenenen venen 8 5 2 Setting the temperatur e unne nennen 8 5 3 SUPE COOL annen ne ennenenennanerveenenen 8 34 nennen 8 55 STEINE Sn ae acer ee 9 5 6 Using the sectioned shelf u nn
3. is environmentally friendly but flam mable Escaping refrigerant may ignite gt Do not damage the piping of the refrigeration circuit A WARNING Fire hazard and danger of damage Do not place appliances emitting heat e g microwaves toasters etc on the appliance A WARNING Blocked ventilation openings pose a risk of fire and damage Always keep the ventilation openings clear Always ensure that the appliance is properly ventilated Depending on model and options Putting into operation NOTICE Risk of damage due to condensate If your appliance is not a Side by Side SBS appliance do not install the appliance directly alongside a further refrig erator freezer Q In the event that the appliance is damaged contact the supplier immediately before connecting to the mains U The floor at the site must be flat and level Q Do not install the appliance in a location where it is exposed to direct radiation of the sun next to a cooker heater and similar LJ Always stand the appliance backed directly to the wall using the enclosed wall spacers see below Q The appliance may be moved only when it is empty Q Do not install the appliance without assistance U The more R 600a refrigerant there is in the appliance the larger the room in which the appliance is standing needs to be In rooms that are too small a flammable mix of gas and air may be created if there is a leak According to the EN 378 stand
4. number of times needed until the required temperature shines in the LED display Note gt Long pressing of the setting button sets a slightly colder value within a small temperature range e g between 5 C and 7 C The LED of the next lower temperature range then shines in the temperature display Use SuperCool to rapidly cool large amounts of X food When SuperCool is activated the fan may run The appliance operates with maximum cooling performance which means that the noise of the refrigeration unit may be temporarily louder The SuperCool function uses slightly more energy 5 3 SuperCool With SuperCool you switch to the highest cooling performance to reach lower cooling temperatures 5 3 1 Cooling with SuperCool gt Briefly press SuperCool button Fig 3 4 gt The SuperCool button Fig 3 4 lights up gt The cooling temperature drops to the coldest value SuperCool is activated gt SuperCool is automatically deactivated after 6 to12 hours The appliance continues to operate in the energy saving normal mode 5 3 2 To prematurely deactivate SuperCool Briefly press SuperCool button Fig 3 4 gt The SuperCool button Fig 3 4 goes out gt SuperCool is deactivated 5 4 Fan With the fan you can rapidly cool large quantities of fresh food or achieve a relatively even distribution of temperature across all the storage levels The forced air cooling is to be recommended at high roo
5. solvents gt Do not damage or remove the type plate on the inside of the appliance It is important for the customer service gt Do not pull off bend or damage cables or other compo nents gt Do not allow any cleaning water to enter the drain channel ventilation grille or electrical parts Please use soft cleaning cloths and a universal pH neutral cleaning agent Please use cleaning and care products suitable for contact with foodstuffs in the appliance interior Empty appliance gt Pull out the power plug Clean plastic outer and inner surfaces with lukewarm water and a little washing up liquid Do not apply stainless steel cleaning agent to glass or plastic surfaces to prevent them from being scratched Darker areas at the beginning and quite an intensive colour of the stainless steel surface are normal NOTICE The stainless steel doors are provided with a high quality surface coating and must not be treated using the accompa nying care product Otherwise the surface coating will be affected es Wipe the coated door surfaces using a soft clean cloth only In case of stubborn dirt use a little water or a neutral cleaning agent A microfibre cloth can be optionally used gt If the stainless steel side walls are dirty clean them using a commercially available stainless steel cleaning agent Then evenly apply the accompanying stainless steel care product making strokes in the direction of the gr
6. 4 4 Insertion into a row of kitchen units _ mm POT N oO Aw ca 40 VT w l Fig 8 1 Stack cabinet 3 Kitchen cabinet 2 Appliance 4 Wall x For appliances supplied with wall spacers the measurement increases by 35 mm see 4 2 The appliance can be inserted into a row of kitchen units To match the appliance Fig 8 2 to the height of the row of units a suitable stack cabinet Fig 8 1 can be fitted above the appli ance When installing with kitchen units max depth 580 mm the appliance can be positioned directly next to the kitchen cabinet Fig 8 3 The appliance will project by 34 mm at the sides and 50 mm in the centre of the appliance in relation to the kitchen cabinet front Ventilation requirements At the back of the stack cabinet there has to be a ventilation duct of at least 50 mm depth throughout the width of the stack cabinet The ventilation space under the ceiling has to be at least 300 cm the larger the ventilation space the more energy saving the appliance is in operation If the appliance is installed with the hinges next to a wall Fig 8 4 the distance between appliance and wall has to be at least 40 mm This corresponds to the projection of the handle when the door is open 4 5 Disposing of packaging A WARNING Danger of suffocation due to packing material and plastic film gt D
7. 4 5 Putting into operation Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustable height feet A and using a spirit level Then support the door Extend the adjustable foot at the turn hinge B until it rests on the floor and then make a further 90 turn When a Side by Side appliance S is fitted together with a second appliance as a SBS combination Proceed according to the Side by Side combined fridge freezer installation instructions Accessories bag of the SBS freezer appliance with freezer compartment Note Clean the appliance see 6 2 If the appliance is installed in a very damp environment condensate may form on the outside of the appliance Always see to good ventilation at the installation site 4 3 Changing over the door hinges You can change over the door hinges if necessary NOTICE Risk of damage to side by side appliances due to condensa tion When a side by side appliance S is fitted together with a second appliance as a SBS combination the door hinges must remain as delivered gt Do not change over the door hinges Ensure that the following tools are to hand U Torx 25 U Torx 15 U Screwdriver U Battery powered screwdriver if necessary J Second person for fitting work if needed 4 3 1 Detaching the door Note gt Remove any food from the door racks before removing the door so th
8. 9 37 DOOR cc 9 lt n eee ee ee re 9 5 8 Removing the bottle holder gt 9 5 9 Vegetable bins n r44nnnnnnennnHnnn en Haren 9 6 Maintenant essiri iinan aaia 10 6 1 Bord ae ee ee ee 10 6 2 Cleaning the appliance cccccsssseeeeesseeeeeeeeeeees 10 6 3 Customer SEFVICE cccccceeeeeeeceeeeeeceaeeeeeeseeeeeeeaees 10 7 Maltunetlon a u 10 8 Decommissioning uurennaunennnnnennnnnennnnnennnenennnnn 11 8 1 Switching off the applianc unseren 11 8 2 Taking the appliance out of servic 11 9 Disposing of the appliance uuusnnunnnennnnnnnennnnn 11 The manufacturer works constantly on the further development of all the types and models Therefore please understand that we have to reserve the right to make design equipment and technical modifications To get to know all the benefits of your new appliance please read the information contained in these instructions carefully The instructions apply to several models Differences may occur Text relating only to specific appliances is marked with an asterisk Instructions for action are marked with a Pe the results of action are marked with a F gt 1 Appliance at a glance 1 1 Description of appliance and equip ment Note Place food inside the appliance as shown in the diagram This allows the appliance to save energy during operation Shelves drawers and baskets are arranged for optimum
9. ain gt Wipe side walls with a paint finish using a soft clean cloth only In case of stubborn dirt use a little water or a neutral cleaning agent A microfibre cloth can be optionally used 10 Clean drain hole Remove deposits with a narrow instrument e g a cotton bud Clean items of equipment by hand with lukewarm water and a little washing up liquid Only use a damp cloth to clean the telescopic rails The grease in the runners is for lubrication purposes and must not be removed After cleaning Wipe dry the appliance and items of equipment Connect the appliance and switch it on again Put the food back inside 6 3 Customer service First check whether you can correct the fault yourself by refer ence to the list see Malfunction If this is not the case please contact the customer service whose address is given in the enclosed customer service list A WARNING Risk of injury if repair work is not carried out professionally Have any repairs and action not expressly specified on the appliance and mains cable carried out by service personnel only see Maintenance Read the appliance designation Fig 13 1 service No Fig 13 2 and serial No Fig 13 3 off the type plate located inside the appliance on the left hand side MOUE UM KEEN BENN index KANS EN Sarsdce HrNo Serve TEE I Fig 13 Notify the customer service specifying the fau
10. ard every 11 g of R 600a refrigerant requires at least 1 m space in the room for the appliance The amount of refrigerant in your appliance is on the type plate inside the appliance Detach the connecting cable from the rear of the appliance removing the cable holder at the same time because other wise there will be vibratory noise Remove the protective film from the outside of the appli ance NOTICE The stainless steel doors are provided with a high quality surface coating and must not be treated using the accompa nying care product Otherwise the surface coating will be affected Wipe the coated door surfaces using a soft clean cloth only Apply a stainless steel cleaner only to the stainless steel side walls evenly wiping with the grain Subsequent cleaning becomes easier as a result gt Wipe side walls with a paint finish using a soft clean cloth only gt Remove the protective film from the decorative trims gt Remove all transit supports The spacers supplied with some appliances must be used to achieve the stated energy consumption These will extend the depth of the appliance by approx 35 mm The appliance is fully functional if the spacers are not used but does have a slightly higher energy consumption In the case of an appliance with enclosed wall spacers mount the wall spacers on the back of the appliance at the top left and right gt Dispose of packaging material see
11. at no food falls out Fig 4 gt Close the door Pull off the cover Fig 4 10 forwards and upwards Lift off the cover Fig 4 77 A CAUTION Risk of injury if the door tips Take good hold of the door gt Set down the door carefully gt Unscrew the upper turn hinge Fig 4 12 2x Torx 25 Fig 4 13 and lift it off Lift off the door and set it aside 4 3 2 Changing the bearing parts Fig 5 Lift out the bearing pin Fig 5 22 together with washer Fig 5 23 and adjustable height foot Fig 5 24 Lift off the stopper Fig 5 27 gt Unscrew Fig 5 26 the turn hinge Fig 5 25 gt Unscrew Fig 5 29 the bearing element Fig 5 28 transfer it to the opposite location hole of the turn hinge and screw it firmly into place Carefully lift off the cover on the handle side Fig 5 27 and transfer it to the opposite side gt Screw the turn hinge Fig 5 25 firmly into place on the new hinge side possibly using a cordless screwdriver with 4 Nm Re insert the stopper Fig 5 27 into the other hole Re insert the bearing pin Fig 5 22 together with the washer and adjustable height foot In so doing pay attention that the locating lug points backwards 4 3 3 Transferring the handle Transfer the spring clamp Fig 6 31 Depress the latch nose and pull the spring clamp off over it Slide the spring clamp into place on the new hinge side until it cl
12. efrigeration Note The energy consumption increases and the cooling perform ance decreases if the ventilation is inadequate Always keep the air slits of the fan free Store perishable food such as ready to serve dishes meat products and sausages in the coldest zone Place butter and preserves in the upper area and in the door see Appli ance at a glance Use recyclable plastic metal aluminium and glass containers and cling film for wrapping gt Use the front area of the refrigerator compartment floor only for briefly putting down cooled products e g when rear ranging and sorting However do not leave cooled products there otherwise they may be pushed back or tipped over when the door is closed Do not store food too close together to enable good air circulation To safeguard bottles from tipping over move the bottle holder 5 2 Setting the temperature The temperature depends on the following factors the door opening frequency the room temperature at the site where the appliance is installed the type temperature and quantity of frozen food Temperature setting to be recommended 5 C The temperature can be changed continuously Once the 1 C setting is reached it starts again with 9 C To access temperature adjustment press the setting button Fig 3 2 once gt The LED of the current temperature flashes in the tempera ture display Press the setting button Fig 3 2 the
13. emperature see 1 2 Keep the time the appliance is open to a minimum The lower the temperature setting the higher the power consumption Store food logically see Appliance at a glance Ensure that all food is well packed and covered for storage This will prevent frost from forming Remove food as needed in order that it does not warm too much First cool warm food to room temperature before storing it Accumulated dust increases the energy consumption Once a year dust the refrigerating unit together with the metal grille of the heat exchanger at the back of the appliance 2 General safety information Danger for the user Controls and displays This appliance can be used by children of 8 years old and over and also by persons with restricted physical sensory or mental capacity or lack of experience and knowl edge if they are supervised or have been instructed on safe use of the appliance and understand the resulting risks Children must not be allowed to play with the appliance Cleaning and user maintenance must not be carried out by children without supervision When disconnecting the appliance from the supply always take hold of the plug Do not pull the cable In the event of a fault pull out the mains plug or deactivate the fuse Do not damage the mains power cable Do not operate the appliance with a defective mains power cable Have any repairs to or intervention in t
14. energy efficiency on delivery Fig 7 1 Operating panel 2 Ceiling light 9 Bottle shelf 10 Defrost water channel 3 Fan 11 Glass shelf 4 Butter and cheese 12 Type plate compartment 5 Glass shelves relocat 13 Coldest zone able 6 Door rack for tinned food relocatable 7 Glass shelf sectioned 8 Door rack for bottles relocatable 14 Vegetable compartment 15 Height adjustable foot 16 transport grips 1 2 Range of appliance use Intended use The appliance is suitable solely for cooling food in a domestic environment or similar This includes use in for example in staff kitchenettes bed and breakfast estab lishments by guests in country cottages hotels motels and other accommodation for catering and similar services in the whole sale trade Depending on model and options Use the appliance solely in a domestic type of environment All other applications are inadmis sible Foreseeable misuse The following applications are expressly prohibited Storage and cooling of medicines blood plasma laboratory compounds or similar materials and products subject to the Medical Devices Directive 2007 47 EC Use in potentially explosive areas Improper use of the appliance can lead to damage to or spoilage of the stored goods Climate rating definitions The appliance is set to operate within specific ambient temperature limits according to its climate
15. equipped with a diagnostic LED The flashing is normal Excessive noise gt Due to the various speed steps speed regulated compressors can generate different running noises p The sound is normal A bubbling and gurgling noise This noise comes from the refrigerant flowing in the refriger ation circuit gt The sound is normal A quiet clicking noise The noise is produced whenever the refrigeration unit motor automatically switches on or off B The sound is normal A hum It is briefly a little louder when the refrigeration unit the motor switches on gt The refrigeration increases automatically when the SuperCool function is activated fresh food has just been placed in the appliance or the door has been left open for a while p The sound is normal The ambient temperature is too high Solution see 1 2 A low hum The sound is produced by air flow noise of the fan p The sound is normal Vibratory noise The appliance is not fixed to the ground The running of the cooling unit therefore makes objects and adjacent furniture vibrate Adjust appliance via the height adjustable feet gt Move bottles and containers apart All LEDs light up in the temperature display Demo mode is activated Please contact the after sales service see Maintenance The outer surfaces of the appliance are warm gt The heat of the refrigeration circuit is used to prevent
16. he appliance and any change of the mains power cable carried out by the customer service only or by other specialised personnel trained for the purpose Only assemble connect and dispose of the appliance according to the instructions Please keep these instructions in a safe place and pass them on to any subsequent owners Special purpose lamps incandescent lamps LEDs fluorescent tubes in the appliance serve to illuminate the appliance interior and are not suited for room illumination Fire hazard The refrigerant R 600a is environmentally friendly but flammable Escaping refrigerant may ignite e Do not damage the refrigerant circuit pipes e Do not allow naked flames or ignition sources to enter the appliance e Do not use any electrical appliances in the interior e g steam cleaners heaters ice cream maker etc If refrigerant escapes remove any naked flames or sources of ignition from the leakage area Ventilate the room well Notify the after sales service Do not store explosives or sprays using combustible propellants such as butane propane pentane etc in the appliance To identify these spray cans look for the list of contents printed on the can or a flame symbol Gases possibly escaping may ignite due to electrical components Keep burning candles lamps and other items with naked flames away from the appliance so that they do not set the appliance on fire Please be sure to sto
17. he vegetable bins pull the vegetable bin all the way out and tilt it forwards a little gt In the case of the bottom drawer the drawer locking device is additionally released and the vegetable bin can be removed Push the projecting telescopic slides back in Fig 10 Fig 12 To insert the vegetable bins place the vegetable bin on the telescopic slides and push to the rear exerting slight pressure gt In the case of the bottom drawer the drawer locking device additionally engages and the vegetable drawer sits firmly on the telescopic slides Depending on model and options 9 Maintenance 6 Maintenance 6 1 Defrosting 6 1 1 Defrosting refrigerator compartment The refrigerator compartment is defrosted automatically The water evaporates Drops of water on the rear wall are function ally conditioned and perfectly normal Clean the drain hole at regular intervals to allow the defrost water to drain see 6 2 6 2 Cleaning the appliance A WARNING Risk of injury and damage as a result of hot steam Hot steam can lead to burns and can damage the surfaces gt Do not use any steam cleaners NOTICE Incorrect cleaning damages the appliance Do not use cleaning agents in concentrated form DP Do not use any scouring or abrasive sponges or steel wool gt Please do not use any aggressive scouring sand chloride chemical or acid based cleaning agents gt Do not use chemical
18. his can cause injury to the eyes 8 Decommissioning 8 1 Switching off the appliance Press the On Off button Fig 3 7 until the display goes dark Release button gt If the appliance cannot be switched off the child lock func tion is active 8 2 Taking the appliance out of service Empty the appliance Pull out the power plug Clean the appliance see 6 2 Leave the door open to prevent odour 9 Disposing of the appliance The appliance contains some reusable materials and should be disposed of properly not simply with unsorted household refuse Appliances which are no longer needed must be disposed of in a professional and appropriate way in accordance with the current local regulations and laws When disposing of the appliance ensure that the refrigeration circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains data on type plate and oil gt Disable the appliance Pull out the plug gt Cut through the connecting cable 11 Liebherr Hausgerate Ochsenhausen GmbH Memminger Strasse 77 79 88416 Ochsenhausen Deutschland www liebherr com
19. icks into place Depending on model and options Fig 7 Lift the stopper Fig 7 33 out of the door bearing bush and transfer it Dismantle the door handle Fig 7 32 stoppers Fig 7 33 and pressure plates Fig 7 34 and transfer to the opposite side gt When fitting the pressure plates on the opposite side make sure they snap properly into place 4 3 4 Fitting the door Place the door from above onto the lower bearing pin Fig 5 22 Close the door Insert the upper turn hinge Fig 4 72 in the door on the new hinge side gt Screw the upper turn hinge Fig 4 12 firmly into place with 4 Nm 2x Torx 25 Fig 4 73 Possibly make preliminary holes with a bradawl or use a cordless screwdriver Snap the cover Fig 4 70 and cover Fig 4 77 into place at the opposite side 4 3 5 Aligning the door Align the door to the appliance housing by way of the two oblong holes in the bottom turn hinge Fig 5 25 To do so unscrew the middle screw A WARNING Risk of injury due to the door dropping out If the bearing parts are not screwed into place firmly enough the door may drop out This may lead to severe injuries What is more the door may not close and therefore the appliance may fail to cool properly gt Screw the turn hinges firmly into place with 4 Nm Check all of the screws and retighten if necessary Depending on model and options Putting into operation
20. ls and displays 3 1 Operating and control elements On Off Up Down SuperCool Ventilation Fig 3 1 On Off button 2 Setting button 4 SuperCool button 5 Fan button Depending on model and options 3 Temperature display 3 2 Temperature display The following are displayed in normal operation the set cooling temperature 4 Putting into operation 4 1 Transporting the appliance A CAUTION Risk of injury and danger of damage as a result of incorrect transport Transport the appliance in a packed condition Transport the appliance upright Do not transport the appliance without assistance 4 2 Installing the appliance A WARNING Fire hazard due to dampness If live parts or the mains lead become damp this may cause short circuits The appliance is designed for use in enclosed areas Do not Operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions A WARNING Risk of fire due to short circuit If the mains cable connector of the appliance or of another appliance touch the rear of the appliance the mains cable connector may be damaged by the appliance vibrations leading to a short circuit Stand the appliance so that it is not touched by connectors or main cables gt Do not plug the appliance or any others into sockets located near the rear of the appliance A WARNING Fire hazard due to refrigerant The refrigerant R 600a
21. lt appliance designation Fig 73 7 service No Fig 73 2 and serial No Fig 13 3 gt This will help us to provide you with a faster and more accu rate service Keep the appliance closed until the customer service arrives gt The food will stay cool longer Pull out the mains plug not by pulling the connecting cable or switch off the fuse 7 Malfunction Your appliance is designed and manufactured for a long life span and reliable operation If a malfunction nonetheless occurs during operation check whether it is due to a handling error In this case you will have to be charged for the costs incurred even during the warranty period You may be able to rectify the following faults yourself Appliance does not work The appliance is not switched on Switch on the appliance The power plug is not properly inserted in the wall socket Check power plug The fuse of the wall socket is not in order Check fuse Vivivit Depending on model and options The compressor runs for a long time The compressor switches to a low speed when little cold is needed Although the running time is increased as a result energy is saved This is normal in energy saving models gt SuperCool is activated B The compressor runs for longer in order to rapidly cool the food This is normal A LED on the bottom rear of the appliance at the compressor flashes regularly every 15 seconds The inverter is
22. m temperature above33 C at high humidity The forced air cooling uses slightly more energy To save energy the fan switches off automatically when the door is open 5 4 1 Switching on the fan Briefly press the fan button Fig 3 5 gt The fan button shines Depending on model and options Control gt The fan is active In some appliances the fan is only acti 5 7 Door racks vated when the compressor is running 5 4 2 To switch off the fan 5 7 1 Moving the storage rack Briefly press the fan button Fig 3 5 gt fle Storage rack according to gt The fan button goes out Selen gt The fan is switched off 5 5 Shelves 5 5 1 Moving or removing shelves The shelves have stops preventing them from being uninten tionally pulled out 5 7 2 Dismantling door racks gt The door racks can be dismantled for cleaning Fig 9 5 8 Removing the bottle holder gt Lift the shelf slightly and pull forward a little gt Adjust the height of the shelf To do so push the cut outs Remove the bottle holder according along the supports to the illustration E In order to remove the shelf fully place it at a slant and pull out towards the front Insert shelf with the raised edge pointing upwards at the back gt The food does not freeze onto the rear wall 5 5 2 Dismantling shelves 5 9 Vegetable bins gt The shelves can be dismantled for cleaning Fig 11 To remove t
23. o not allow children to play with packing material Control The packaging is made of recyclable materials corrugated board cardboard expanded polystyrene parts polythene bags and sheets polypropylene straps nailed wooden frame with polyethylene panel Take the packaging material to an official collecting point oN 4 6 Connecting the appliance NOTICE Risk of damage to the electronic control system gt Do not use stand alone inverters conversion of d c to a c three phase or energy saving plugs A WARNING Fire and overheating hazard Do not use extension cables or multiple socket outlets The type of current alternating current and voltage at the installation site have to conform with the data on the type plate see Appliance at a glance The socket must be properly earthed and fused The tripping current for the fuse must be between 10 A and 16 A The socket must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency It must be outside the area of the rear of the appliance Check the electrical connection Plug in the power plug 4 7 Switching on the appliance Press On Off button Fig 3 7 gt The appliance is switched on The temperature display indi cates the set temperature gt If all LEDs in the temperature display light up demo mode is activated Please contact the after sales service 5 Control 5 1 Food r
24. rating The correct climate rating for your appliance is indicated on the type plate Note Compliance with the ambient temperatures indicated is required otherwise the cooling performance is reduced Climate for ambient temperatures of rating SN 10 C to 32 C N 16 C to 32 C ST 16 C to 38 C T 16 C to 43 C 1 3 Conformity The refrigerant circuit is tested for leakage The appliance complies with the relevant safety regulations and EC Directives 2006 95 EC 2004 108 EC 2009 125 EC and 2010 30 EU Note for test institutions Tests are to be carried out according to the applicable standards and guidelines Preparation and testing of the appliances must be carried out taking the manufacturer s loading plans and the notes in the operating manual into account Depending on model and options General safety information 1 4 External dimensions of the appli ance mm Fig 2 Designation H mm K 36 KP 36 KPesf 36 1655 K 42 KP esf 42 1852 SK esf 42 For appliances supplied with wall spacers the measurement increases by 35 mm see 4 2 1 5 Saving energy Always ensure good ventilation Do not cover ventilation openings or grille Always keep fan louvres clear Donot place appliance in areas of direct sunlight or next to a stove heater or similar object The energy consumption depends on the installation condi tions e g the ambient t
25. re alcoholic drinks or other packaging containing alcohol in tightly closed containers Any alcohol that leaks out may be ignited by electrical components Danger of tipping and falling Do not misuse the plinth drawers doors etc as a Step or for support This applies particu larly to children Danger of food poisoning Do not consume food which has been stored too long Danger of frostbite numbness and pain Avoid lasting skin contact with cold surfaces or refrigerated frozen food or take protective steps e g wear gloves Do not consume ice cream water ice or ice cubes immediately and do not consume them too cold Danger of injury and damage Hot steam can lead to injury Do not use elec trical heating or steam cleaning equipment open flames or defrosting sprays to defrost Do not use sharp implements to remove the ice Please observe the specific information in the other sections DANGER identifies a situation involving direct danger which if not obviated may result in death or severe bodily injury WARNING _ identifies a dangerous situation which if not obviated may result in death or severe bodily injury CAUTION identifies a dangerous situation which if not obviated may result in minor or medium bodily injury NOTICE identifies a dangerous situation which if not obviated may result in damage to property Note identifies useful information and tips 3 Contro
Download Pdf Manuals
Related Search