Home

ONKYO C-N7050

Contents

1. gt Place the unit as far away as possible from TVs and other devices that have strong magnetism CD player Playback is not possible gt If the disc is upside down reload it with the labeled side up gt If the disc is dirty wipe it clean Ifa blank disc is loaded replace it with a disc that has recordings on it gt Depending on the quality of the disc and the condition of the recording playback of a CD R CD RW might not be possible gt This unit cannot play back unfinalized CD R CD RW discs The sound skips gt Vibrations will cause the sound to skip Install this unit in a stable location If the disc is dirty wipe it clean Do not use discs that are scratched or cracked Playback is not possible gt Check the file format For information about playable file formats see MP3 WAV formats for CDs and Audio files playable by this unit for USB and playback over the network The names of tracks artists and albums are not shown gt There is no ID3 tag information for the music file Use a computer for example to prepare MP3 files with corrected ID3 tag information Some characters are not shown correctly This unit cannot display symbols and full size or double byte characters such as Japanese Chinese etc correctly File names for MP3 WMA or other file formats should consist of alphanumeric characters If the file information uses Jap
2. In this section we explain operations that are the same in every mode 1 Press the ON STANDBY button to turn the unit on ONKYO ON STANDBY QO E J 2 Press the INPUT button to change the source Each time you press the INPUT button the source changes as shown below cree gt USB F gt USB R NET J When using the remote control to change the source press the button for the source that you want to use CD NET or USB aa aa ke we INPUT SELECTOR co uss ner 3 Start source playback Starting playback To play a CD Press the CD play pause gt 1 button During playback sw appears on the display To play an USB connected device Press the USB play pause gt I I button During playback s appears on the display Pausing playback To pause a CD Press the CD play pause I button To resume playback from the position where it was paused press the CD play pause gt 1 button again During pause appears on the display To pause an USB connected device Press the USB play pause gt f button To resume playback from the position where it was paused press the USB play pause gt i I button again During pause appears on the display Stopping playback Press the stop m button to stop playback Skipping to search for a track Turn the main unit MENU ENTER dial to skip to tracks befo
3. This starts playback of that file All folder mode You can also select folders and files in this mode but all folders are treated equally regardless of position in the folder structure Use the remote control 1 When stopped press the pause ff button 1 appears on the display and all folder mode is activated e Pressing the stop button when STOP KEY is set to All Folder activates all folder mode Use the skip lt gt buttons to select a folder and press the ENTER button or play button to enter that folder Use the skip lt gt p buttons to select a file After selecting the desired file press the ENTER button or play button This starts playback of that file Listening to files on a USB flash drive iPod iPhone When playing audio files from a USB flash drive unless using repeat playback set to Repeat All only the audio files in the same level of a single folder will be played back 1 Press the main unit INPUT button to change the source to USB F or USB R When using the remote control press the USB button INPUT SELECTOR cp uss ner e No storage will appear when nothing is connected 2 Connect a USB flash drive to the selected USB port When a USB flash drive is detected its volume label will be displayed e In this state you can press the play pause m f F button to
4. To add the radio station after heme Mecie changing its name after using the direction a v lt gt buttons to input the characters select OK and press 2 Use the direction A v lt gt buttons to select vTuner the ENTER button Internet Radio and press the ENTER button Inputting characters See Inputting characters in An error message will appear if the service is not on Other operations the air 3 Use the direction A V buttons to select a station and press the ENTER button Assigning to the PRESET buttons Playback will start Long pressing one of the PRESET 1 to 3 buttons while you are playing back an Internet radio station allows you to set it to the PRESET button Add a station to My Favorite Groups in vTuner Internet Radio Select vTuner Internet Radio and press the ENTER button to see the My Favorite Groups folder on the same screen that shows genres and locations You can add Internet radio stations that you like to this folder Before starting the procedure e To see similar stations press and hold the remote This procedure requires a computer control MENU button use the direction A v buttons to select Stations like this and press the ENTER button Using network services Registering as a user 1 Open a web browser on a computer connected to the same network as this unit and access the following URL http onkyo vtuner com 2 Click the flag for
5. UpdateStart and press the ENTER button The unit firmware starts to be updated 11 After Complete appears disconnect the USB flash drive 12 Press the ON STANDBY button to put the unit into tandby e Do not use the remote control ON STANDBY button in this case e If you do nothing for three minutes the unit will enter standby automatically This completes the update The unit should now be using the latest firmware Error codes When an error occurs Error or an error message appears on the display of this unit Letters and numbers appear in place of the asterisks Refer to the error code list to check the meaning Error codes Meaning and countermeasures 10 20 The USB flash drive could not be recognized Confirm that the USB flash drive or USB cable is securely connected to the USB port on the front of the unit 14 The root folder of the USB flash drive does not contain a firmware file or the firmware file is for a different model for example Follow the instructions on the C N7050 product website to download the firmware and conduct the process again If the same error occurs repeatedly make a note of the error code and contact your dealer Other codes Conduct the process again from the beginning If the same error occurs repeatedly make a note of the error code and contact your dealer e f an error occurs during an update unplug the unit s power cord once and plug
6. if file has ID3 tag gt Album if file has ID3 tag gt Elapsed time of current track gt Playback time of current track gt File format sampling rate and bit rate Dimmer Press the remote control DIMMER button to cycle through display and indicator brightness levels lid Ordinary gt Dim Dark 1 Auto Standby function When the Auto Standby function is On the unit will automatically enter standby mode if there is no audio input and this unit is not operated for 20 minutes When the Auto Standby function is enabled the ASb indicator appears on the display Press the ON STANDBY button to exit standby mode Listening to CDs This unit can play the following types of discs and files Discs CD DA CD R CD RW Files MP3 WAV 1 Press the INPUT button to change the source to CD When using the remote control press the CD button 2 Press the tray open close 4 button 3 Place a disc on the tray with the labeled side up 4 Press the tray open close 4 button to close it Example Audio CD loaded Total number Total playback of tracks time Example MP3 WAV disc loaded FOLDER Total number Total number of folders of files e No Disc appears if no disc has been loaded 5 Press the play pause gt i I button Playback starts from the first track Direct playback using track numbers In addition to using the skip lt gt buttons to select tracks you can
7. 48 kHz 64 kHz 88 2 kHz 96 kHz Quantization bit rate 16 bit 24 bit m4a mp4 M4A MP4 DSD File extension Sampling frequency 2 8224 MHz 5 6448 MHz dsf DSF CAUTION e This unit does not support the following formats when using the Play To feature of Windows Media Player FLAC Ogg Vorbis DSD e When playing back audio files over a network the types of file formats that can be played back also depend on the software running on the network server For example when using Windows Media Player 11 not all audio files on the computer can be played back Only audio files that have been added to the Windows Media Player 11 library can be played back e When playing back files that have been recorded at variable bit rate VBR the playback time might not be shown correctly Notes about USB flash drives Only an USB flash drive can be used with this unit e FAT16 and FAT32 formats are supported for USB flash drives e If a USB flash drive is divided into multiple partitions this unit will recognize them as separate volumes e This unit supports up to 20 000 files and 16 folder levels within a single folder e This unit does not support USB hubs or devices with USB hub functions Never connect such devices to this unit e Neither WAV files with bit rates of 176 4 kHz and higher nor 5 6MHz DSD files can be played back from a USB flash drive that is connected to the USB R port on the back of the unit CAUTION e
8. A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 gt Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 13 gt LAC __ e The apparatus draws nominal non operating power from the AC outlet with its POWER or ON STANDBY switch not in the ON position e The mains plug is used as the disconnect device the disconnect device shal
9. Media Sharing to open a dialog box Select the Share my media check box and click OK to display the compatible devices Select this unit and click Allow e The icon of this unit is checked when you click it Click OK to close the dialog box E Windows Media Player 12 1 2 Turn on your computer and start Windows Media Player 12 In the Stream menu select Turn on media streaming to open a dialog box e If media streaming is already turned on select More streaming options in the Stream menu to list players in the network and then go to step 4 Click Turn on media streaming to list players in the network Select this unit in Media streaming options and check that it is set to Allow Click OK to close the dialog box Using network services DLNA playback automatically or you can manually rebuild the index See Windows online help for instructions 1 Start the computer or network server about how to do this 2 Press the NET button to open the network service menu Network service menu Press the NET button and press the direction A V lt gt buttons to select the menu as follows vTuner Internet Radio gt My Favorites gt DLNA gt Home Media Use the direction A V lt gt buttons to select DLNA and press the ENTER button Use the direction a v lt gt buttons to select the ne
10. WAV data format e After recording a CD R CD RW disc close the session complete disc creation This unit cannot play back discs that have unclosed sessions e This unit can play back files from a maximum of 99 folders Furthermore the unit can recognize and play back a maximum of 499 folders including the root folder and files e Multiple sessions recorded on the same disc are not supported Only the first session on such discs can be played back e Depending on the condition of the disc this unit might not be able to play it back or audio skipping could occur e This unit cannot play audio files with copyright protection from a disc USB and Networks Audio files playable by this unit e This unit can play the following types of audio files over a USB or network connection e This unit supports gapless playback of a USB flash device in the following conditions When WAV FLAC and Apple Lossless files are consecutively played back and they have the same format sampling frequency channels and quantization bit rate e The Play To feature does not support gapless playback MP3 File extension mp3 MP3 Standard MPEG 1 MPEG 2 Audio Layer 3 Sampling frequency 8 kHz 11 025 kHz 12kHz 16 kHz 22 05 kHz 24 kHz 32 kHz 44 1 kHz 48 kHz Bit rate 8 kbps 320 kbps or VBR WMA File extension Sampling frequency 8 kHz 11 025 kHz 16 kHz 22 05 kHz 32 kHz 44 1 kHz 48 kHz Bit rate 5 kbps 320 kbps or VBR
11. Windows Media Player in advance 3 Select the file that you want to play in Windows Media Player and right click it This opens a pop up menu e To use the Play To feature with audio files ona different network server open that network server from the list that appears under Other Libraries and select the audio file that you want to play 4 Click the Play To button and select this unit from the Play To list Open the Windows Media Player Play To dialog box and start playback from this unit Use the Play To dialog box in Windows 7 to control remote playback e The Play To feature cannot be used under the following conditions When using network services During playback of an audio file on a USB device or an iPod iPhone Using network services Home Media playing music files in a shared folder About a shared folder A shared folder is configured in a network device such as a computer or NAS device hard disk connected to your home network for access from other users You can play music files in a shared folder on your computer or NAS device connected to the same home network as that of this unit To play music files in a shared folder you must first configure Windows 8 or Windows 7 Make sure this unit and a computer or NAS device are connected to the same router e Configure the sharing options and create a shared folder on your computer in advance e For information on how to configure th
12. e Copyright protected files cannot be played e WMA Pro Voice not supported wma WMA WMA Lossless File extension Sampling frequency 44 1 kHz 48 kHz 88 2 kHz 96 kHz Quantization bit rate 16 bit 24 bit wma or WMA WAV File extension Sampling frequency 8 kHz 11 025 kHz 12 kHz 16 kHz 22 05 kHz 24 kHz 32 kHz 44 1 kHz 48 kHz 64 kHz 88 2 kHz 96 kHz 176 4 kHz 192 kHz Quantization bit rate 8 bit 16 bit 24 bit e WAV files contain uncompressed PCM digital audio AAC File extension wav WAV aac m4a mp4 3gp 3g2 AAC M4A MP4 3GP 3G2 Standard MPEG 2 MPEG 4 Audio Sampling frequency 8 kHz 11 025 kHz 12 kHz 16 kHz 22 05 kHz 24 kHz 32 kHz 44 1 kHz 48 kHz 64 kHz 88 2 kHz 96 kHz Bit rate 8 kbps 320 kbps or VBR FLAC File extension Sampling frequency 8 kHz 11 025 kHz 16 kHz 22 05 kHz 32 kHz 44 1 kHz 48 kHz 64 kHz 88 2 kHz 96 kHz 176 4 kHz 192 kHz Quantization bit rate 8 bit 16 bit 24 bit flac FLAC Ogg Vorbis File extension Sampling frequency 8 kHz 11 025 kHz 16 kHz 22 05 kHz 32 kHz 44 1 kHz 48 kHz ogg OGG Bit rate 48 kbps 500 kbps or VBR e Incompatible files cannot be played back LPCM Linear PCM Sampling frequency 44 1 kHz 48 kHz Quantization bit rate 16 bit e Playback only supported over a network Apple Lossless File extension Sampling frequency 8 kHz 11 025 kHz 12 kHz 16 kHz 22 05 kHz 24 kHz 32 kHz 44 1 kHz
13. f the connected media is not supported Not Connected appears on this unit s display e This unit cannot play back audio files if copyright protection is used e Do not connect computers to this unit s USB ports e Audio from computers cannot be input through this unit s USB ports e This unit might not be able to use media that is loaded into a USB card reader e Depending on the USB flash drive and its contents reading data from it might take some time e Depending on the USB flash drive the unit might not be able to read its data correctly or supply power properly e During the use of USB flash drives please be aware that our company will take no responsibility should data be lost or changed a USB flash drive become damaged or other harm occur e We recommend backing up data saved on a USB flash drive before using it with this unit e This unit does not support USB flash drives with security functions Note about DLNA The Digital Living Network Alliance DLNA is a group that is advancing the standardization of reciprocal connections and the exchange of audio image video and other data among computers game devices and digital household appliances over ordinary home networks LAN This unit complies with version 1 5 of the DLNA guidelines Note about servers This unit supports the following versions of Windows Media Player e Windows Media Player 11 e Windows Media Player 12 e Servers that comply with DL
14. input a track by number and start playback During playback or when stopped you can use the remote control number buttons to select a track by number For a single digit number press the corresponding number button For a double digit number press the gt 10 button followed by the number button for the tens digit Then press the number button for the ones digit Playback starts after the track number is input Example entering track number 7 Press 7 Example entering track number 23 Press gt 10 2 and 3 Selecting tracks on MP3 WAV discs Navigation mode You can select files and folders using the folder hierarchy at When stopped press the stop W button Root appears on the display and navigation mode is activated e Pressing the stop W button when STOP KEY is set to Navigation activates navigation mode Press the play button The name of the first folder inside the Root directory appears If there are no folders the name of the first file appears Use the skip lt gt buttons to select folders and files on the same level To select files and subfolders inside another folder after selecting that folder press the play button Use the skip lt gt buttons to select subfolders and files inside that folder e To move up one level press the pause I E button After selecting the desired file press the ENTER button or play button
15. it into the outlet again before trying the update one more time Reference Information Using an iPod or iPhone This unit can be connected to and used with the following iPod iPhone models iPhone 5s iPhone 5c iPhone 5 iPhone 4s iPhone 4 iPhone 3GS iPhone 3G iPhone iPod touch ist 2nd 3rd 4th and 5th generation iPod classic iPod nano 2nd 3rd 4th 5th 6th and 7th generation e This unit cannot output video from an iPod or iPhone e Use the USB cable supplied with the iPod or iPhone to connect it to the unit e If the unit or remote control buttons do not work properly with your iPod or iPhone updating its software might solve the problem Notes about discs Types of discs that can be played by this unit CDs with the COMPACT disc DIGITAL AUDIO logo GOMPACY COMPACT COMPACT ime Gse dee DIGITAL AUDIO Recordable ReWritable CD R and CD RW discs that have been properly recorded and finalized using the audio CD format CD R and CD RW discs that have been recorded with MP3 WAV files and properly finalized This unit can play the above types of discs without using an adapter This unit cannot play discs of types other than those above A If you try to play any other type of disc with this unit loud noises that damage speakers or harm hearing could occur Never try to play any type of disc other than those shown above e This unit might not be able to properly play Copy Control CDs Dual
16. jack of an Onkyo amplifier or receiver using the included RI cable you can control the unit using the remote control of the amplifier or receiver e For information on the controllable functions refer to each device s instruction manual e When there are two RI jacks both jacks work in the same way You can connect the unit to either one of them e To enable the operation you must connect the RI cable and RCA audio cable correctly AUDIO OUTPUT ANALOG DIGITAL PIRO ANALOG coaxial OPTICAL REMOTE CONTROL Onkyo amplifier etc S RI USB port Use to connect a USB flash drive to the unit e When changing the input source this port is identified as USB R e An iPod iPhone cannot be connected here Power cord Names and functions of parts Remote control On Stand by l button Press this button to turn the unit on or put it in standby mode DIMMER button Switches the brightness of the display INPUT SELECTOR buttons Use these buttons to select the source e After selecting USB press the USB button to switch between USB F and USB R Pause 11 button During playback press to pause When paused press to resume playback Playback gt button Press to start playback when it is stopped or paused Skip lt gt Search lt gt button Use to skip to the previous or next track
17. start playing in order the tracks in the first folder that contains audio files on the USB flash drive 3 Press the MENU ENTER dial fo S a Nt NY ae MENU ENTER _ od bes A A BR LY VY VW The name of the track or folder appears e Using the remote control you can also press the MENU ENTER button Turn the MENU ENTER dial to select a track and press the play pause I button e This starts playback of the selected track e Using the remote control you can select tracks with the direction A V buttons and then press the play button e When a folder is selected the first track in that folder will start playing back e You can also select a folder and then press the MENU ENTER dial to select tracks inside that folder Listening to files on a USB flash drive iPod iPhone Listening to an iPod iPhone The following explanations refer to an iPod but they also apply to use with an iPhone 1 Press the main unit INPUT button to change the source to USB F When using the remote control press the USB button P N QO O INPUT SELECTOR e No storage will appear when no iPod is connected 2 Connect the USB port on the front of the main unit to your iPod using its accessory USB cable Ls SS iPod iPhone e Connect an iPod to the iPod iPhone USB connector on the fron
18. stop playback Input INPUT button Use this button to select the source RETURN button When a menu is open press to return to the previous menu MENU ENTER MENU ENTER lt gt dial Turn clockwise to skip to later tracks or counterclockwise to skip to earlier tracks Press to use as the ENTER button to confirm settings Press and hold to use as the MENU button Turn to change the item or setting value shown when a menu screen is open Names and functions of parts FR AUDIO OUTPUT ETHERNET ANALOG DIGITAL e oren Rear Analog audio output LINE OUT jacks These output analog audio signals Use the included RCA audio cable to connect this unit s output jacks to the audio input jacks of an amplifier Connect the white plug of the audio cable to the white L jack and the red plug to the red R jack Digital audio output DIGITAL OUT connectors These output digital audio Connect one of this unit s digital audio output connectors COAXIAL or OPTICAL to the digital audio input connector of a digital recording device such as an amplifier COAXIAL Coaxial digital cable OPTICAL Optical digital cable ETHERNET port Use a commercially available LAN cable to connect this port to a wired network or Internet connection e When changing the input source this port is identified as NET RI REMOTE CONTROL jack When connecting the unit to the RI
19. they are especially prone to sticking Handling discs e Always load discs with their labeled sides up e Be careful when handling discs If the side that contains the data unlabeled side is scratched smudged with fingerprints or otherwise dirty or marred errors could occur during playback e To remove a disc from its case while pressing down on the center of the case hold the disc by its edges Disc storage e After you finish using a disc always put it back into its case for storage Failure to do so could result in warping and scratches e Do not leave discs in places that are exposed to direct sunlight or that are very humid or hot Doing so could cause discs to become deformed or degraded making them unplayable e CD R and CD RW discs are more susceptible to the impacts of heat and ultraviolet rays than ordinary CDs For this reason do not leave them for long times in places that are exposed to direct sunlight or near devices that generate heat for example e Always clean discs before storing them Leaving a disc in an unclean state might result in skipping or degraded sound quality Precautions for Rental Discs e Do not use discs with residue from cellophane tape rental discs with labels which are peeling off or discs with decorative labels This type of disc could get stuck in the CD receiver or could damage the CD receiver Maintenance e f the side of the disc that has the data encoded on it unlabele
20. AV file information is shown e Regardless of the setting characters that cannot be shown in ID3 tag information are replaced with asterisks Replace If a track or folder name contains a character that cannot be shown File_n or Folder_n with n being the track folder number will be shown instead Not default setting Characters that can be shown are shown and characters that cannot be shown are replaced with asterisks gt E ID3 VER 1 Set how ID3 Version 1 0 1 1 tag information is shown Read default setting The unit will load tag information and show it Not Read Tag information will not be shown E ID3 VER 2 Set how ID3 Version 2 2 2 3 2 4 tag information is shown Read default setting The unit will load tag information and show it Not Read Tag information will not be shown E HIDE NUMBER The unit can hide numbers that are attached to the beginnings of track and folder names Disable default setting Such numbers will be shown Enable Such numbers will not be shown e When an MP3 WAV CD is made on a computer the ordinary file playback order is not determined By adding numbers like 01 02 and 03 to the beginnings of MP3 WAV file names however they can be played back in numerical order E STOP KEY You can set the function of the stop I button on the main unit Navigation default setting Pressing the stop I button activates navigation mode Disab
21. CP is set to Disable IP Address Subnet Mask Gateway and DNS Server will appear and must be set e When you press the RETURN button when viewing the NET Setting submenu Network Save will appear After changing a setting press the ENTER button to save it If you press the RETURN button the menu screen will close without applying the setting changes The submenus appear in the following order IP Address View set the IP address MAC Address View this unit s MAC address DHCP Enable default setting DHCP is enabled Disable DHCP is disabled Subnet Mask View set the subnet mask Gateway View set the default gateway DNS Server View set the DNS server address Proxy URL Set the proxy server address Proxy Port Set the proxy port number e This only appears when a proxy URL has been set Net Standby This sets whether or not the unit can be controlled over a network when the unit is in standby Disable default setting When the unit is in standby it cannot be controlled over a network Enable When the unit is in standby it can be controlled over a network e When set to Enable more power will be consumed when the unit is in standby Update You can update the firmware of this unit Do not put the unit in standby during an update e See Updating the firmware for update procedures Version This shows the current firmware version CN via NET CN via USB You can
22. Discs or other special CDs that do not conform to the Red Book CD standard Operation and sound quality cannot be guaranteed when special discs are used in this unit If playback of a special disc should cause trouble contact the seller of the disc CD R CD RW discs This unit can play discs that are in audio CD format CD DA and CD R CD RW that have files in MP3 and WAV formats e Be sure to finalize discs created by CD recorders e Depending on the quality of the disc and the condition of the recording playback might not be possible For details see the operation manual for the device you are using e f you have any questions about how to handle a CD R or CD RW disc contact the seller of the disc directly Precautions for use e Do not use cracked discs because they could damage the unit e When writing something on the label side of a disc use a felt tip permanent marker The use of a ballpoint pen or other pen with a hard tip could damage the disc making it unplayable e Never use commercially available CD stabilizers Doing so could make the disc unplayable or damage the unit e If a CD R CD RW disc that has a printable label surface is left in this unit for a long time it could stick to the inside and become extremely difficult to remove and possibly even cause the unit to malfunction e Always remove such discs and store them in cases when not in use Moreover avoid using discs that have just been printed because
23. My Favorites 19 Adding a program 19 Starting playback 20 DLNA 20 About DLNA 20 Setting up Windows Media Player 20 DLNA playback 21 Using the Play To feature 21 Home Media playing music files in a shared folder 22 About a shared folder 22 Setting the computer 22 Playing from a shared folder 22 Settings 23 MP3 Setting 23 M OPT Music Optimizer 24 ASb Auto Standby 24 NET Setting 24 Update 24 Audio Output 25 Other operations 26 Inputting characters 26 Firmware Update 26 Updating the firmware via network 26 Updating the firmware via USB connection 27 Reference Information 29 Using an iPod or iPhone 29 Notes about discs 29 USB and Networks 30 Troubleshooting 32 General 32 CD player 32 Audio files 32 iPod iPhone 32 Internet radio 32 DLNA 33 Home Media 33 Restoring factory default settings 33 Specifications 34 Trademarks and other leagal statement 35 DISCLAIMER 35 IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug
24. NA A network server must be connected to the same network as this unit This unit supports up to 20 000 files and 16 folder levels within a single folder e Depending on the type of media server this unit might not recognize it or be able to play audio files saved on it Note about network services e The network services that can be used will differ according to the region e Network services and contents that you can use through this unit could become unusable without warning if the service provider stops service Troubleshooting General Audio files The unit does not turn on gt Confirm that the power plug is securely plugged in to an outlet Unplug the power cord once wait five seconds and then plug it in again The unit turns off gt When the Auto Standby function is enabled the unit will enter standby automatically after a set amount of time Check the settings No sound is output gt Confirm that the input source is selected correctly Remote control does not work gt If the batteries are exhausted replace both of them with new ones gt Point the remote control at the front panel of the unit from a distance of less than about 5 m 16 ft The remote control will not work if there is an obstruction between it and the main unit In this case try changing the position Ifa fluorescent light is near the unit turn the light off There is noise
25. Network service menu Press the NET button and press the direction A v lt gt buttons to select the menu as follows vTuner Internet Radio gt My Favorites gt DLNA gt Home Media This unit supports Internet radio stations that use the PLS M3U and podcast RSS formats Even if an Internet radio station uses one of these formats playback might not always be possible depending on the type of data and playback format e An Internet connection is necessary to listen to Internet radio programs e If service from the service provider stops use of that network services and contents might cease to be possible Adding a program Before starting the procedure e This procedure requires a computer e You have to connect your computer and this unit to the same network to make My Favorites settings e You will need the name and URL of the radio station to add during the storing procedure so check them in advance Press the MENU button Use the direction a v buttons to select NET Setting and press the ENTER button When IP Address appears press the ENTER button Make a note of the IP address Turn the computer on and open Internet Explorer or another Internet browser 5 Input this unit s IP address into the Internet browser URL field This unit s WEB Setup information screen will open in the Internet browser e When using Internet Explorer you can also do this by se
26. ONKYO C N 050 Network CD Player Instruction Manual Made for COMPACT 3iPod JiPhone MSE Names and functions Of paS ecretou 7 Basic operation 11 Listening to CDs 13 Listening to files on a USB flash drive iPod iPhone 14 Memory playback random playback repeat playback 16 Using network services 18 MEUINGS wiscsssccresaisnieteeneies 23 Other operations 26 CONTENTS IMPORTANT SAFETY INSTRUCTIONS 3 PRECAUTIONS 5 Before use 6 What s in the box 6 Precautions for use 6 Maintenance 6 Names and functions of parts 7 Front 7 Rear 8 remote control 9 Display 10 Basic operation 11 Starting playback 11 Pausing playback 11 Stopping playback 11 Skipping to search for a track 11 Searching for part of a track 12 Playback order of audio files 12 Information shown on the display CD USB NET 12 Dimmer 12 Auto Standby function 12 Listening to CDs 13 Direct playback using track numbers 13 Selecting tracks on MP3 WAV discs 13 Listening to files on a USB flash drive iPod iPhone 14 Listening to files on a USB flash drive 14 Listening to an iPod iPhone 15 Memory playback random playback repeat playback 16 Memory playback CD 16 Random playback CD USB 16 Repeat playback CD USB 17 Using network services 18 vTuner Internet Radio 18 Store favorite vTuner Internet Radio programs 18 Storing other Internet radio programs
27. RCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Company makes no representation or warranty of any kind express or implied about the completeness accuracy validity legality reliability suitability or availability with respect to the information content or services available through this device Company shall not be liable whether in contract or tort including negligence and strict liability for any direct indirect special incidental or consequential damages or any other damages arising out of or in connection with any information contained in or as a result of the use of any content or service by you or any third party even if Company has been advised of the possibility of such damages nor shall Company be liable for any third party claims against users of this device or any third party In no event shall Company be responsible nor liable for without limiting the generality of the foregoing any interruption or suspension of any information content or service available through this device Company is neither responsible nor liable for customer service related to the information content and services available through this device Any question or request for service relating to the information content or services should be made directly to the appropriate content owners and services providers ONKYO Onkyo Corporation Kitahama Chuo Bldg 2 2 22 Kitahama Chuo ku OSAKA 541 0041 JAPAN http www onkyo com Th
28. RNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS NO USER SERVICEABLE PARTS ARE INSIDE e IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT CONTACT THE STORE WHERE YOU PURCHASED THE UNIT FOR A SERVICE REFERRAL DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED e USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN COULD RESULT IN HAZARDOUS RADIATION EXPOSURE IN USA CANADA USE ONLY ON 120 V SUPPLY Model for USA This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CAUTION Changes or modifications to this equipment not expressly approved by Onkyo CORPORATION for compliance will void the user s warranty This equipment has been teste d and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment do
29. SB NET Press the DISPLAY button during audio file playback to change the information shown on the display During audio CD playback Information about the disc playing back is shown Elapsed time of current track gt REMAIN remaining time of track being played gt TOTAL REMAIN remaining time of disk being played e f the random playback or total playback time exceeds 99 minutes and 59 seconds is shown During MP3 WAV disc playback Various file information including the title artist and album ID3 tag information for the MP3 WAV file playing back is shown Elapsed time of current track gt File name gt Folder name gt Title if file has ID3 tag gt Artist if file has ID3 tag gt Album if file has ID3 tag gt Sampling rate and bit rate e lf the file currently playing back exceeds 99 minutes and 59 seconds is shown e Characters in track and folder names that cannot be shown are indicated with asterisks The unit can also be set to show the file or folder number when characters that cannot be shown are included See BAD NAME under Settings e WAV files do not have ID3 tags so their titles and other information are not shown During USB NET playback Various file information including the title artist and album ID3 tag information for the audio file playing back is shown Title if file has ID3 tag gt Artist
30. Use also when selecting folders and files Press and hold to search backward forward e This unit does not have the PRESET and PRESET gt functions Stop M button Press to stop playback ENTER button Use to confirm menu selections and setting values Direction A V lt gt buttons Use in menus and to change selected items MENU button Press to open the menu screen RANDOM button Use to change the random play back setting MEMORY RANDOM REPEAT 2 MEMORY button D Use to set memory playback Pa TA DEF Number buttons Use these to input track file and folder numbers hi JE iio Alphanumeric characters period slash and Q i _ are not used in this model Tray open close 4 button Press to open and close the disc tray DISPLAY button Change the information shown RETURN button When a menu is open press to return to the previous menu REPEAT button Use to change the repeat playback setting CLEAR button Use when setting memory playback When both the main unit and the remote control have buttons with the same functions the instructions in this manual refer only to one but the other can be used in the same way Names and functions of parts Display Auto Standby ASb indicator This indicator appears when the Auto Standby function is on Format indicators When the so
31. anese Chinese or other double byte characters playback is possible but the name will not be shown correctly iPod iPhone Playback is not possible Disconnect the iPod iPhone from the USB port wait a few seconds and connect it again gt Updating to the latest iPod iPhone software might resolve the problem Download the latest software from the following website http www apple com support country dest downloads Cannot operate the iPod iPhone Make sure the iPod iPhone is not locked You cannot adjust the unit volume using an iPod iPhone Internet radio Cannot connect to the Internet gt Confirm that a computer can connect to the Internet using the same network Enter a correct network connection password Check the settings of the network s firewall The station podcast might not be available at the moment gt The link for the station podcast might be out of date The number of registered users for the station podcast might have already reached a limit making it unavailable to the public gt If the Internet connection speed is too slow searching might take time Cannot listen to an Internet radio station or podcast gt The broadcaster might have a temporary problem with their Internet connection gt Confirm that your system is properly connected to the Internet DLNA Restoring factory default settings Cannot connec
32. b Auto Standby gt M OPT Audio Output gt Update When the input source is NET Net Setting gt Update Asb Auto Standby gt M OPT Audio Output e The setting shown first depends on the current source e You can also turn the MENU ENTER lt gt dial on the main unit to do this 3 Press the ENTER button e You can also press the MENU ENTER dial on the main unit to do this After opening MP3 setting or NET Setting repeat steps 2 and 1 to make a selection in the submenu e You must wait at least one minute after turning the unit on to select and change the NET Setting and Update items 4 Use the arrow lt gt buttons to change setting values e You can also turn the MENU ENTER dial on the main unit to do this 5 Press the ENTER button to confirm the change e You can also press the MENU ENTER dial on the main unit to do this 6 After you complete making settings press the RETURN button to close the menu screen e When you press the RETURN button while viewing the NET Setting submenu Network Save will appear Press the ENTER button to save the settings If you press the RETURN button the menu screen will close without saving the setting changes MP3 Setting You can set how MP3 WAV file information is shown and how MP3 WAV discs are played back for example These settings can only be changed when the disc is stopped E BAD NAME Set how MP3 W
33. d side becomes dirty with fingerprints or dust use a soft cloth to wipe the surface from the center directly toward the edge e Never use record cleaners antistatic treatments thinners or similar chemicals to clean discs Such chemicals could harm the surface of the disc MP3 WAV formats This unit can play MP3 and WAV files that have been recorded on a CD R or CD RW disc e Playable audio file formats MP3 extension mp3 MP3 Standard MPEG 1 MPEG 2 Audio Layer 2 Layer 3 Sampling Frequency 16 kHz 22 05 kHz 24 kHz 32kHz 44 1kHz 48 kHz Bit rate 8 kbps 320 kbps or VBR e Variable bit rate VBR is supported However the time and other information shown on the display during playback of a VBR file might be incorrect sometimes WAV extension wav WAV Sampling Frequency 8 kHz 11 025 kHz 12 kHz 16 kHz 22 05 kHz 24 kHz 32 kHz 44 1 kHz 48 kHz Quantization bit rate 8 bit 16 bit Precautions when creating MP3 WAV discs using a computer e This unit cannot play back discs that were not written in conformity to the ISO 9660 standard e The unit recognizes MP3 and WAV files by their file extensions which are mp3 and wav respectively Always include the extension in the file name e The unit cannot recognize files without these file extensions Even if one of these file extensions is added to a file name however this unit cannot play files that are not in the MP3 or
34. e Americas Onkyo U S A Corporation 18 Park Way Upper Saddle River N J 07458 U S A For Dealer Service Order and all other Business Inquiries Tel 201 785 2600 Fax 201 785 2650 http www us onkyo com For Product Support Team Only 1 800 229 1687 http www us onkyo com Europe Onkyo Europe Electronics GmbH Liegnitzerstrasse 6 82194 Groebenzell GERMANY Tel 49 8142 4401 0 Fax 49 8142 4208 213 http www eu onkyo com Onkyo Europe Electronics GmbH UK Branch Meridien House Ground floor 69 71 Clarendon Road Watford Hertfordshire WD17 1DS United Kingdom Tel 44 0 8712 00 19 96 Fax 44 0 8712 00 19 95 China Onkyo China Limited Hong Kong Unit 1033 10 F Star House No 3 Salisbury Road Tsim Sha Tsui Kowloon Hong Kong Tel 852 2429 3118 Fax 852 2428 9039 http www hk onkyo com Onkyo China PRC Mainland 1301 555 Tower No 555 West NanJing Road Jing an District Shanghai China 200041 Tel 86 21 52131366 Fax 86 21 52130396 http www cn onkyo com Asia Oceania Middle East Africa Please contact an Onkyo distributor referring to Onkyo SUPPORT site http www intl onkyo com support The above mentioned information is subject to change without prior notice Visit the Onkyo web site for the latest update D1406 0 294018 9 8 SN 29401898 C Copyright 2014 Onkyo Corporation Japan All rights reserved
35. e NAS device and create a shared folder refer to the NAS device s instruction manual Setting the computer E Configuring the sharing options 1 Select Choose home group and sharing options in the Control Panel e f the menu is not displayed check that View by is set to Category 2 Select Change advanced sharing settings 3 Check that the following radio buttons are selected in Home or Work Enable network discovery Turn on file and printer sharing Turn on sharing so anyone with network access can open files Turn off password protected sharing 4 Select Save Changes and click OK in the dialog box E Creating a shared folder Select and right click the folder to share Select Properties Select Advanced Sharing on the Sharing tab Select the Share this folder check box and click OK 4 Click Share for Network File and Folder Sharing 5 Select Everyone from the pull down menu Click Add and click Share e To set a user name and password to a shared folder set Permissions in Advanced Sharing in the Sharing tab e Check that a workgroup is set wh Playing from a shared folder 1 Press the NET button to open the network service menu QO O L INPUT SELECTOR cp uss NET Network service menu Press the NET button and press the direction A v lt gt buttons to select the menu as follo
36. e cabinet 2 To prevent the laser from being exposed do not remove the cover Refer servicing to qualified personnel For European Models Declaration of Conformity We declare under our soleresponsibility that this product complies with the standards Safety Limits and methods of measurement of radio disturbance characteristics Limits for harmonic current emissions Limitation of voltage changes voltage fluctuations and flicker RoHS Directive 201 1 65 EU WEEE http www onkyo com manual weee weee pdf Before use What s in the box Precautions for use RCA audio cable x 1 RI cable x 1 Remote control RC 887C x 1 Batteries for remote control AAA x 2 Using the remote control Remove the cover from the back of the remote control and insert two AAA batteries with their ends oriented in the case as shown Replace the cover If the operation range of the remote control decreases the batteries have become exhausted In this case replace the batteries with new ones Dispose of the used batteries according to the instructions on them or requirements set by your local municipality Remote Control Sensor Approx 16ft 5m e When using the remote control point it toward the remote control signal receiver on the main unit from a distance of 5 m 16 ft or less e Do not place obstructions between the main unit and the remote control e The remote control might not work if
37. e playback mode cannot be changed Random playback will be canceled in the following cases e When the unit is put into standby e f the disc tray is opened Memory playback random playback repeat playback When using a USB flash drive Plays back audio files in the folder repeatedly in random order When you press the RANDOM button to enter the random playback mode gt will appear on the left side of the display Random playback will be canceled in the following cases e When Net Standby is set to Disable and the power is in standby mode e When repeat playback is used Repeat playback CD USB Press the REPEAT button to cycle through repeat modes as follows REPEAT O O O O O a nr an ILLO When using an audio CD or MP3 WAV disc Each time you press the REPEAT button the icon shown on the left side of the display will change as follows e Repeat playback and random playback can be used together G1 Repeat All gt ir Repeat 1 Repeat Off Repeat playback will be canceled in the following cases e When the unit is put into standby e Ifthe disc tray is opened When using a USB flash drive Each time you press the REPEAT button the icon shown on the left side of the display will change as follows ma Repeat All gt p Repeat 1 gt D Folder Repeat Repeat Off Repeat playback will be canceled in the following cases e When random playback is used when ra
38. es cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the equipment and or the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Model for Canada Industry Canada s Compliance Statement This Class B digital apparatus complies with Canadian ICES 003 PRECAUTIONS This unit contains a semiconductor laser system and is classified as a CLASS 1 LASER PRODUCT So to use this model properly read this Instruction Manual carefully In case of any trouble please contact the store where you purchased the unit To prevent being exposed to the laser beam do not try to open the enclosure CAUTION CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS THIS PRODUCT UTILIZES A LASER USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE The label on the right is applied on the rear panel CLASS 1 LASER PRODUCT 1 This unit is a CLASS 1 LASER PRODUCT and employs a laser inside th
39. ies to prevent them from leaking e lf the batteries leak wipe away the leakage inside the battery compartment and replace the batteries with new ones e Do not use batteries of types other than those specified Do not mix new batteries with old ones or use different types of batteries together e Do not heat or disassemble batteries Never throw batteries into fire or water e Do not carry or store batteries with other metallic objects The batteries could short circuit leak or explode e Never recharge a battery unless it is confirmed to be arechargeable type IMPORTANT SAFETY INSTRUCTIONS continued 07 10 ol RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead in an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that could be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point in an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION e DO NOT REMOVE EXTE
40. ip a a button once to return to the beginning of the current track To return to the beginning of an earlier track keep pressing skip lt lt button Checking the program content When stopped use the search lt gt buttons to showtrack numbers and playback times Clearing tracks from the program When stopped press the CLEAR button to remove the last track that was added to the program Adding tracks to the end of the program When stopped use the skip lt gt buttons to show the track that you want to add and press the play button to add it to the end of the program Ending memory playback Press the stop W button to stop playback and then press the MEMORY button e Memory playback will also end if you press the tray open close 4 button to open the tray or press the ON STANDBY button to put the unit into standby Random playback CD USB Use this function to play back tracks in random order Press the RANDOM button to turn random playback on off RANDOM we KA I 5 4 j Nas YY gt gt Ka Vy ae a When using an audio CD or MP3 WAV disc You can reorder the tracks randomly and play them all once Stop the unit before setting this mode Press the RANDOM button to enter the random playback mode The will appear e If you press the RANDOM button during playback the current playback mode either Normal Play or Random Play will appear but th
41. ist and press and hold the MENU button and use the ENTER button to select Create new station Press the ENTER button again to show fields where characters can be input and input the name and URL e To remove a radio station that has been added press and hold the MENU button while that station is playing or select it and use the direction a v buttons to select Delete from My Favorites and press the ENTER button You can also remove stations using the WEB Setup screen ona computer e To change the name of a radio station that has been added select the radio station and press and hold the MENU button Then use the direction A V buttons to select Rename this station and press the ENTER button e You can register up to 40 Internet radio stations same router e To play a music file with DLNA you need a NAS device or the like with DLNA server functions and a DLNA player software to stream the music You can also stream music files using a computer with Windows Media Player 11 or 12 which has both DLNA server and player functions First configure the Windows Media Player 11 or 12 to enable streaming With Windows Media Player 12 Remote Playback function you can stream music files stored on your computer to the unit by operating the computer Setting up Windows Media Player E Windows Media Player 11 1 2 Turn on your computer and start Windows Media Player 11 In the Library menu select
42. l remain readily operable CAUTION e Do not expose this apparatus to drips or splashes e Do not place any objects filled with liquids such as vases on the apparatus e Do not install this apparatus in a confined space such as a book case or similar unit e The apparatus should be located close enough to the AC outlet so that you can easily reach the power cord plug at any time e Ifthe product uses batteries including a battery pack or installed batteries they should not be exposed to sunshine fire or excessive heat e CAUTION for products that use replaceable lithium batteries there is danger of explosion if a battery is replaced with an incorrect type of battery Replace only with the same or equivalent type WARNING Products with Class construction are equipped with a power supply cord that has a grounding plug The cord of such a product must be plugged into an AC outlet that has a protective grounding connection A Precautions concerning batteries isuse of batteries could cause them to rupture or leak leading o fire injury or the staining of nearby things Please read and observe the following precautions carefully e Be sure to insert the batteries with correct positive and negative orientations e Use batteries of the same type Never use different types of batteries together e f the remote control is not used for a long time more than a month remove the batter
43. le Pressing the stop IM button does not activate navigation or all folder mode All Folder Pressing the stop button activates all folder mode M OPT Music Optimizer MP3s and other files that use irreversible compression formats have reduced audio quality compared to the original sound sources due to their compression Use M OPT to optimize compressed audio OFF default setting M OPT is not used ON M OPT is used ASb Auto Standby When the Auto Standby function is on the unit will automatically enter standby mode if 20 minutes pass under the conditions described below Playback source Condition CD No disc loaded or disc stopped NET Input source not playing USB When this function is enabled ASb appears on the display Use the Net Standby setting to set how network control affects standby OFF Auto Standby is disabled ON default setting Auto Standby is enabled NET Setting To use network services make network settings on this unit in advance Make the settings according to the characteristics of the network to which it is being connected e An Internet connection is necessary to listen to Internet radio e The Net Standby setting is not necessary for connecting this unit to a network e If DHCP is set to Enable default IP Address Subnet Mask Gateway and DNS Server settings will appear but cannot be changed If DH
44. lecting Open from the File menu and inputting the IP address ONKYO Unit information My Favorites Click the My Favorites tab and input the name and URL of the Internet radio station Click Save to finish registering that Internet radio station The registered Internet radio station will be added to My Favorites Using network services Starting playback 1 Press the NET button About DLNA Digital Living Network Alliance DLNA can be referred to as a technology standard or the industry group to develop the technology standard to interconnect and use AV components computers and other devices in a home network This unit allows you to use DLNA to play music files stored on a computer or a hard disk connected to your home network NAS device Make sure this unit and a computer or NAS device are connected to the L O L INPUT SELECTOR cp uss NET 2 Select My Favorites from the network service menu and press the ENTER button to show the Internet radio stations Network service menu Press the NET button and press the direction A V lt gt buttons to select the menu as follows vTuner Internet Radio gt My Favorites gt DLNA gt Home Media 3 Select the one that you added and press the ENTER button e f you want to add a new radio station to the My Favorites menu select the blank item in the l
45. ndom playback mode ends the set repeat playback mode will become active again Using network services Store favorite vTuner Internet Radio programs You can store specific vTuner Internet Radio programs as favorites to make accessing them easier There are two ways to do this vTuner Internet Radio is a portal site for Internet radio stations around the world You can search for Add it to My Favorites radio stations by musical genre country and other Press the NET button to open the network service menu classifications and use the My Favorites item to add a favorite program vTuner Internet Radio has been added to this unit in to it advance e An Internet connection is necessary to listen to vTuner 1 After selecting the radio station to add press and hold Internet Radio the remote control MENU button e You can add a radio station even while it is playing 1 Press the NET button to open the network service back menu y A Aa ee INPUT SELECTOR cD usp ner 2 Use the direction a v buttons to select My Network service menu Favorites and press the ENTER button Press the NET button and press the direction 3 To add the radio station without changing its name A V lt gt buttons to select the menu as follows use the direction V lt gt buttons to select OK and lna lane RECIO lt B gt Wy Fevoiies gt DENA press the ENTER button
46. ngs and try the operation again If this unit does not operate properly follow the procedures below to restore it to the default settings that it had when shipped new from the factory Doing this might correct the problem While the unit is on press and hold the stop m button and press the ON STANDBY button ON STANDBY Note about condensation If this unit is brought from a cold outdoor environment into a warm room or the heater has just been turned on in the room where it is located for example condensation might occur on operating parts or lenses resulting in improper operation If this occurs leave the unit on and wait 1 2 hours This should enable normal playback Specifications Frequency Response 10Hz 70kHz 192kHz 24bit Audio Dynamic Range 108 dB 192kHz 24bit LPF 22kHz A Weight 1kHz THD Total Harmonic Distortion 0 003 192kHz 24bit LPF 22kHz 1kHz Signal to Noise Ratio 115 dB 192kHz 24bit LPF 22kHz A Weight 1kHz Rated RCA Output Level and Impedance 2 0 V rms 200 Q Audio Output Digital Optical 22 5 dBm Audio Output Impedance Digital Coaxial 0 5 V p p 75 Q Operation Condition Temperature Humidity 5 C 35 C 41 F 95 F 5 85 Power Supply AC 220 240 V 50 Hz Power Consumption 30 W Stand by Power Consumption 5 5 W Dimensions W x H x D 435 x 102 x 302 mm 17 1 8 x 4 x 11 7 8 inches Weight 4 6 kg 10 1 8 Ibs Disc Compa
47. on Press to open and close the disc tray Display CD playback pause CD j J button Press to start CD playback when it is stopped or paused During CD playback press to pause e The source switches to CD FRONT USB playback pause FRONT USB gt f i button Press to start USB playback when it is stopped or paused During USB playback press to pause The source switches to USB NET button Press to open the network service menu e The source switches to NET USB port Use to connect an iPod iPhone or USB flash drive to the unit e When changing the input source this port is identified as USB F e Do not connect computers to this unit s USB ports Audio from computers cannot be input through this unit s USB ports Display DISPLAY button Changes the information shown Remote control signal receiver When using the remote control point it toward this receiver qi Preset PRESET button You can store specific vTuner Internet Radio programs as favorites for easy playback Storing to the PRESET button 1 Play the radio station to add 2 Press and hold one of the PRESET buttons 1 to 3 e Preset OK will appear when the radio station has been stored successfully e The stored station will be overwritten each time another station is stored e f no radio program is playing pressing the PRESET button does not store a radio station showing Preset Failed Stop m button Press to
48. onfirm that the router is turned on e Confirm that the unit and router are connected with a LAN cable e Check the router setting For the setting see the instruction manual of the router e This unit may fail in network connection if your network environment does not allow multiple device connections Consult your Internet service provider ISP e You need a router separately if your modem does not have the router function Depending on your network connection environment you need to configure the proxy server For information on the configuration consult the document provided by your carrier or ISP provider e If you still cannot connect to the Internet the DNS server or proxy server may be temporarily down Check the service status with your ISP provider Others Retry from the beginning If the error persists check the error code and contact Onkyo Support shown at the end of the manual Case 2 If an error occurs during updating disconnect and reconnect the power cord and retry updating Case 3 If you do not have access to the Internet contact Onkyo Support shown at the end of manual Updating the firmware via USB connection Use the USB port to update the firmware You need a 32 MB or larger capacity USB flash drive for updating Precautions when updating the firmware Before updating stop playback and disconnect anything connected to the USB ports While updating never put the unit into standby mode o
49. onsumes power when in standby mode e Supply voltage to the unit that matches the voltage indicated on the rear panel If you are in any doubt regarding this matter consult an electrician e Do not open the body of the unit as this might result in damage to the circuitry or cause electric shock If a foreign object should get into the unit contact your dealer e When removing the power plug from an outlet always pull directly on the plug Never pull on the cord itself e Ifa TV is turned on while the unit is on static might appear on the TV screen depending on the characteristics of the TV broadcast signal This is not a malfunction of the unit nor of the TV If this occurs turn the unit off Maintenance Wipe dirt from the top cover and other panel surfaces using a soft cloth that has been slightly dampened with a diluted neutral cleanser Do not use chemically treated wipes thinner or similar substances because they could damage the surface of the unit A For safety disconnect the power cord from the socket before cleaning Names and functions of parts ON STANDBY Front l ON STANDBY button Press this button to turn the unit on or put it in standby mode e When this unit is in standby mode it consumes a slight amount of power For this reason we use the term standby rather than off Disc tray Tray open close 4 butt
50. r disconnect the power cord or the USB flash drive being used for the update Do not access this unit from a computer during an update Completing the update takes about five minutes Settings are retained after an update Update procedures 1 2 A Connect a USB flash drive to the computer that you are using and delete any files on it Download the firmware file to the computer from our website Decompress the downloaded file on the computer e Do not change the names of the decompressed files Copy the decompressed files to the root folder of the USB flash drive Do not copy any files other than the decompressed files Do not copy the compressed file Confirm that this unit is on Connect the USB flash drive with the decompressed files to the USB port on the front of the unit Press the INPUT button to change the source to USB F Now Initializing appears on the display followed by the name of the USB flash drive e Loading the USB flash drive takes about 20 to 30 seconds Press the MENU button to open the menu and use the direction A V buttons to select Update Press the ENTER button Use the direction lt gt buttons to select CN via USB and press the ENTER button e This selection will not appear and cannot be selected if the flash drive does not contain firmware that can be used to update the unit Other operations 10 Select
51. re or after the current track Keep turning until the desired track is selected When using the remote control use the skip lt gt buttons Use to skip to the previous or next track Keep pressing until the desired track is selected e During playback press the me button once to return to the beginning of the current track To return to the beginning of the previous track keep pressing the xt button e During memory playback tracks from earlier or later in the program will be played back Basic operation Searching for part of a track During playback press a remote control search lt gt button to search backward forward Release the button when you find the desired part Playback resumes from that point Playback order of audio files Discs with audio files store them in folders in the same way that files are ordinarily managed on a computer Moreover some store multiple folders in one folder Example of folder numbers and file playback order 1 9 for a disc containing audio files during normal playback 001 ROOT MP3 WMA file 2 MP3 WMA file 002 folder MP3 WMA file MP3 WMA file 004 folder 002 folder MP3 WMA file MP3 WMA file MP3 WMA file 005 folder MP3 WMA file gt MP3 WMA file e The order in the illustration above might change if files or folders are added deleted or moved Information shown on the display CD U
52. retained after updating Before starting a firmware update e Before starting an update check the network connection e Stop any playing Internet radio iPod iPhone USB flash drive or server Update procedures 1 Press the MENU button and press the direction A v buttons to select Update 2 Press the ENTER button e Wait for a while if Not Available is displayed and Update cannot be selected 3 Press the direction lt gt buttons to select CN via NET and press the ENTER button e The option does not appear when no firmware update is available 4 Select UpdateStart and press the ENTER button e Updating starts 5 Completed appears on the unit s display when updating is completed 6 Press the ON STANDBY button on the front panel to put the unit into standby e Do not use the remote control at this time If you do nothing for three minutes the unit will enter standby automatically Other operations Case 1 When an error occurs Error or an error message appears on the display of this unit Letters and numbers appear in place of the asterisks Refer to the descriptions below to check the meaning Error code 10 20 The LAN cable could not be recognized Connect the LAN cable properly 11 13 21 28 Internet connection could not be established Check the following points e Confirm that the IP address subnet mask gateway address and DNS server setting are correct e C
53. stributed this device and its affiliates collectively Company We have no control over the nature content and availability of those services The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them All information content and services available through this device belong to third parties and are protected by copyright patent trademark and or other intellectual property laws of applicable countries The information content and services provided through this device are for your personal noncommercial use only Any information content or services may not be used in any manner other than previously approved by the appropriate content owner or service provider You may not modify copy republish translate exploit create derivative works upload post transmit sell or distribute in any manner any information content or services available through this device unless expressly permitted by the appropriate copyright patent trademark and or other intellectual property owner including without limitation content owner or service provider THE CONTENT AND SERVICES AVAILABLE THROUGH THIS DEVICE ARE PROVIDED AS IS COMPANY DOES NOT WARRANT INFORMATION CONTENT OR SERVICES SO PROVIDED EITHER EXPRESSLY OR IMPLIEDLY FOR ANY PURPOSE COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE NON INFRINGEMENT ME
54. t of the unit 3 Operate the iPod to start playback e USB iPod appears on the display No information about the content is shown e f an iPod is connected to this unit it will only be recharged when this unit is ON Recharging will stop when the iPod is fully recharged Recharging is not possible when this unit is in standby Memory playback random playback repeat playback Memory playback CD This unit can store up to 25 tracks in the memory Use the remote control e Stop the unit before proceeding with the steps 1 Press the remote control MEMORY button Example Audio CD loaded TRACK Example MP3 WAV disc loaded FOLDER FILE 2 Add tracks to the memory Example Audio CD Use the skip lt gt 1 buttons to select a track to store When using an audio CD you can also select tracks using the number buttons Direct playback using track numbers Press the play button to add the track to the program Repeat these procedures to add other tracks as needed Example MP3 WAV disc Follow the procedures in Selecting tracks on MP3 WAV discs FOLDER FILE HI 4 a Folder number File number Program number 3 Press the play button to start playback Skipping to search for a track Press the skip lt gt buttons to play tracks from earlier or later in the program Keep pressing until the desired track is selected e During playback press sk
55. t to the network Check the settings of the network s firewall gt Confirm that a DLNA server on the same network can connect to the network gt Confirm that the password to connect to the DLNA server is correct gt Confirm that the DLNA server is not shut down or in sleep mode gt There might be a problem with the network authentication Press the INPUT button to select NET again Cannot find a track gt Add the track to the media library of Windows Media Player gt Select this unit from the Windows device list gt If the computer is using antivirus or security software the unit might not be able to connect to it Home Media Cannot find a folder file gt Make folder file sharing settings gt Add the file to the shared folder Confirm that the password for the user account is correct gt Check the file format If the computer is using antivirus or security software the unit might not be able to connect to it This unit uses a microprocessor so noise and other external interference could cause it to stop functioning properly If this should occur unplug the unit s power from the outlet and wait a little while before plugging the power in again and retrying the operation If the unit still does not function properly after doing the above follow the procedures in Restoring factory default settings to restore the unit to its factory default setti
56. the desired language at the top left of the vTuner home screen 3 When the screen is displayed in the desired language input the ID of this unit in the ID input field e To check the ID of this unit press the remote control NET button press the direction a v buttons to select vTuner Internet Radio and press the ENTER button Press the direction A v buttons to display ID The 12 alpha numerical characters after the ID are the ID of this unit Write it down 4 Click Create Account Login on the next screen on the computer and create an account on the displayed screen Your e mail address will be your login ID Be sure to write down the password since you will need it to log in Add a radio station to a list of favorites 1 After you log in the computer displays the screen that allows you to select a desired radio station Select the station to add as you like for example by filtering stations by genre region or language or using the search function 2 To add the station to the bookmark list click the add icon ZB shown on the left of the station name To create a group at the time follow the on screen instructions e To remove the station from the bookmark list click the remove icon C39 Storing other Internet radio programs My Favorites To listen to Internet radio programs not stored in this unit follow these procedures to add them to the My Favorites list in the network service menu
57. the remote control signal receiver on the unit is exposed to direct sunlight or bright light If this occurs try moving the unit e Beware that use of this remote control could cause the unintentional operation of other devices that can be controlled by infrared rays e Do not install this unit in a location that could become hot This includes places that are exposed to direct sunlight or near a radiator heater stove or other heating equipment Moreover do not place it on top of an amplifier or other equipment that generates heat Doing so could cause discoloration or deformation e Avoid locations that are extremely cold or exposed to excessive humidity or dust e In order to enable good heat dissipation leave at least 20 cm 8 between this unit and walls and other equipment when installing it If you put it in a rack take precautions to prevent overheating by leaving at least 5 cm 2 open above the top of the unit and at least 10 cm 4 open behind the unit e Do not put cloth on top of the unit or place the unit on top of bedding or thick carpet Doing so could cause the unit to overheat or damage it e Do not lift or move the unit during playback because the disc rotates at high speed Doing so could damage the disc e Always remove any loaded disc before moving this unit or packing it for installation in a different location for example Moving the unit with a disc inside could cause a malfunction e This unit c
58. tibility CD DA CD R CD RW Discs that have not been properly finalized may only be partially playable or not playable at all E Audio Outputs Digital Outputs 1 OPTICAL 1 COAXIAL Analog Outputs 1 E Others RI 2 Ethernet 1 USB 2 Front USB2 0 Rear USB1 1 e Specifications and features are subject to change without notice Trademarks and other legal statement DISCLAIMER Microsoft Windows Windows Media and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries iPhone iPod iPod classic iPod nano and iPod touch are trademarks of Apple Inc registered in the U S and other countries Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance Through this device you are able to link to other services or websites which are not under the control of any company which has designed manufactured or distributed have di
59. tton If this is not done the input characters will not be saved The following characters can be used a zl 0 lt gt A ZI amp _ N Space This inputs a blank space that is one character wide Shift This changes the characters shown left right Use these to move the cursor in the text input area BS backspace Delete characters to the left of the cursor Move the cursor left OK Select when input complete You can also change them by pressing the gt 10 button You can press the CLEAR button to delete all the input characters at once Update the firmware via network or USB connection Download the latest firmware Visit the Onkyo website to download the latest firmware If no firmware is listed no firmware update is available See Update for how to check the firmware version Updating the firmware via network Use the network connection on the rear panel to update the firmware Precautions when updating the firmware e Make sure that this unit is turned on and the Ethernet cable is connected to the rear panel of this unit e While updating never disconnect or turn off this unit e While updating never disconnect and reconnect the Ethernet cable e While updating never disconnect and reconnect the power cord e Do not access this unit from a computer while updating e Updating takes about five minutes to be completed e Settings you made are
60. twork server and press the ENTER button The network server folder will be shown e Some network servers do not support use of the search function e This unit cannot access photographs or videos on a network server e Depending on network server sharing settings some contents might not be shown See the operation manual of the network server Use the direction a v buttons to select the audio file that you want to play and press the ENTER button or play button e Searching forward backward and pausing functions might not work with some media servers e f information cannot be retrieved from a server No Item will appear on the display If this occurs check the server and network connections e Immediately after an audio file is added toa Windows Media Player library that file might not appear in this unit s audio file list This is because the Windows library index has not been refreshed You can either wait for the index to refresh Using the Play To feature The Play To function allows you to operate DLNA O compliant controller devices and computers on a home network and enables this unit to play audio files that are i saved on those devices Lid e A DLNA compliant controller device or computer and TE ve this unit must be connected to the same network in cD USB NET order to make My Favorites settings 1 Turn this unit on 2 Turn the computer on and open Windows Media Player You must set
61. update the firmware using a USB flash drive Audio Output Make the audio output digital analog settings Select one of the three modes according to the D A conversion characteristics This section mainly describes about digital output Analog output signals are basically D A converted audio signals Mode 1 This mode converts the signals to PCM 44 1 48 kHz which can be handled by most devices e Audio with PCM 48 kHz or more sampling frequency will be down converted to PCM 44 1 48 kHz before being output e DSD audio will be digitally output at PCM 44 1 kHz Mode 2 default setting Use this mode for a device compatible with up to PCM 192 kHz digital signal input e Audio with up to PCM 192 kHz sampling frequency will be output without conversion e DSD audio will be digitally output at PCM 44 1 kHz Mode 3 This mode converts DSD signals to analog signals before outputting them e DSD audio will not be digitally output e Audio with up to PCM 192 kHz sampling frequency will be output without conversion Other operations Follow these procedures to input characters when using the NET Setting and My Favorites menus for example 1 Use the remote control direction A v lt gt buttons to select a character or symbol and press the ENTER button Repeat this procedure to input more 2 After completing input use the remote control direction A v lt gt buttons to select OK and press the ENTER bu
62. urce is set to USB or NET and a DSD or AAC audio file is playing the DSD or AAC indicator appears according to the file format FILE indicator When the source is set to CD and a disc containing audio files is loaded this indicator appears The file number is shown beneath the indicator TRACK indicator When the source is set to CD and an audio CD is loaded this indicator appears The track number is shown beneath the indicator Play pause gt I indicator TOTAL REMAIN indicator When the source is set to CD this indicator shows what information about the disc is being displayed TOTAL Total disc playback time REMAIN Remaining playback time of track being played TOTAL REMAIN Remaining playback time of disc being played FOLDER indicator When the source is set to CD and a disc containing audio files is loaded this indicator appears The number of folders is shown beneath the indicator Message display area Track information and menus appear here The following icons appear in the message display area Y U qo dsg fe t 4 By e t F Folder Track Broadcast station name Playing back Paused Searching forward Searching backward Artist name Album name Repeat mode Repeat one track Folder repea Random Random repeat Memory Memory repeat Does not appear when the source is CD This only appears when the source is CD SECR ol Ve 1i e al
63. ws vTuner Internet Radio gt My Favorites gt DLNA gt Home Media 2 Use the direction v lt gt buttons to select Home Media and press the ENTER button 3 Use the direction a v buttons to select the server that you want to use and press the ENTER button Confirm the server name of your computer by viewing its properties 4 Use the direction a v buttons to select the shared folder that you want to use and press the ENTER button 5 When a user name and password are required input the necessary account information e After inputting the account information once it is saved so you will not need to input it the next time e Use the account information set when you created the shared folder 6 Press the direction a v buttons to select the music file to play and press the ENTER button or play button Playing starts Follow the procedures below to open the menu and change settings 1 Press the MENU button e You can also press and hold the MENU ENTER dial on the main unit to do this 2 Use the direction a v buttons to select the setting you want to change Jj jd V S Y S V A C N N a A 7 e N Press a direction A v button repeatedly to cycle through the settings in the following order When the input source is CD MP3 Setting gt Asb Auto Standby gt Net Setting Update When the input source is USB As

Download Pdf Manuals

Related Search

Related Contents

SOMNOcomfort®    

Copyright © All rights reserved. Failed to retrieve file