Home
Ctek Lithium XS
Contents
1. CONGRATULATIONS To the purchase of your new professional switch mode battery charger This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging The LITHIUM XS charger model is designed for Lithium ion batteries using LiFePO4 technology only Please check with the battery manufac turer for details Do not use the LITHIUM XS charger for any other battery technology SUPPLY PLUG MAINS CABLE u CTEK COMFORT CONNECT TH din u CHARGE CABLE CTEK COMFORT CONNECT eyelet M6 CTEK COMFORT CONNECT clamp Supply plugs may differ to suit your wall socket HOW TO CHARGE 1 Connect the charger to the battery 2 Connect the charger to the wall socket 3 Follow the 8 step display through the charging process The battery is ready to start the engine when STEP 3 is lit The battery is fully charged when STEP 7 is lit 4 Stop charging at any time by disconnecting the mains cable from the wall socket READY TO USE FULLY CHARGED RESET BUTTON ERROR LAMP POWER LAMP BATTERIES WITH UNDER VOLTAGE PROTECTION Some Lithium ion batteries have an on board UVP under voltage protection that disconnects the battery to avoid it becoming too deeply discharged This prohibits the CTEK charger from detecting that there s a battery connected To bypass this the bat tery charger needs
2. EN 7 8 EN
3. to open the UVP By pressing the RESET button for 10 seconds the charger opens the UVP During this process the charging STEP 7 is lit Once the UVP has been opened and the battery is ready to be charged the charger automatically starts the charging cycle EN 3 ERROR LAMP If the error lamp is lit check the following 1 Is the chargers positive lead connected to the battery s positive pole 2 Is the charger connected to a 12V LiFePOs battery 3 Has charging been interrupted in STEP 1 or 4 Restart the charger by pressing the RESET button If charging is still being interrupted the battery STEP 1 can not accept charge may be too large for the charger to wake up Press RESET button up to 5 times a paralell load may be connected to the battery Disconnect the battery and try again STEP 4 can not keep charge and may need to be replaced POWER LAMP If the power lamp is lit with a 1 STEADY LIGHT The mains cable is connected to the wall socket 2 FLASHING LIGHT The charger has entered the energy save mode This happens if the charger isn t connected to the battery within 2 minutes or the battery on board UVP under voltage protection is activated READY TO USE The table shows the estimated time for an empty battery to reach 90 state of charge SOC Please note that charging times are longer in low ambient temperatures BATTERY SIZE Ah TIME TO 90 CHARGED 8Ah 2h 20Ah 5h 60Ah 16h 4
4. 60Ah up to 120Ah for maintenance Dimensions 168 x 65 x 40mm L x W x H Insulation class IP65 Weight 0 6kg Back current drain is the current that drains the battery if the charger is not connected to the mains CTEK chargers have a very low back current The quality of the charging voltage and charging current is very important A high cur rent ripple heats up the battery which has an aging effect on the positive electrode High voltage ripple could harm other equipment that is connected to the battery CTEK battery chargers produce very clean voltage and current with low ripple The battery charger is designed to operate from 20 C to 50 C However battery manufacturers may recommend other temperature ranges for charging their batteries Please check battery specifications 20018043B LIMITED WARRANTY CTEK SWEDEN AB issues this limited warranty to the original purchaser of this product This limited warranty is not transferable The warranty applies to manufacturing faults and material defects for 5 years from the date of purchase The customer must return the product together with the receipt of purchase to the point of purchase This warranty is void if the battery charger has been opened handled carelessly or repaired by anyone other than CTEK SWEDEN AB or its authorised representatives One of the screw holes in the bottom of the charger is sealed Removing or damaging the seal will void the war ranty CTEK SWEDEN AB make
5. EN CONNECT AND DISCONNECT THE CHARGER TO A BATTERY INFO If the battery clamps are incorrectly connected the reverse polarity pro tection will ensure that the battery and charger are not damaged For batteries mounted inside a vehicle 1 Connect the red clamp to the bat tery s positive pole 2 Connect the black clamp to the vehicle chassis remote from the fuel pipe and the battery 3 Connect the charger to the wall socket 4 Disconnect the charger from the wall socket before disconnecting the battery 5 Disconnect the black clamp before the red clamp Comfort Connect Some vehicles may have posi tively earthed batteries 1 Connect the black clamp to the bat tery s negative pole 2 Connect the red clamp to the vehicle chassis remote from the fuel pipe and the battery 3 Connect the charger to the wall socket 4 Disconnect the charger from the wall socket before disconnecting the battery 5 Disconnect the red clamp before the black clamp Comfort Connect CHARGING PROGRAM ACCEPT BULK ABSORPTION ANALYSE COMPLETION MAXIMIZATION FLOAT PULSE VOLTAGE V CURRENT A Increasing voltage to 13 8V 5A 13 4V 13 8V 5 0 1 0A 10 days amp Charge cycle restarts Max 10h 3minutes rt ifvoltagetdrone 5A until 11 0V STEP 1 ACCEPT STEP 5 COMPLETION Tests if the battery can accept charge This step prevents that charging proceeds with a Final charge with increased c
6. ly taken care of by the chargers advanced control but some rare errors in the battery could still exist Don t leave any battery during charging unattended for a longer period of time Ensure that the cabling does not jam or comes into contact with hot surfaces or sharp edges Always check that the charger has switched to STEP 7 before leaving the charger unattended and connected for long periods If the charger has not switched to STEP 7 within 24 hours this is an indication of an error Manually disconnect the charger e This appliance is not designed for use by young children or people who cannot read or understand the manual unless they are under the supervision of a responsible person to ensure that they can use the battery charger safely Store and use the bat tery charger out of the reach of children and ensure that children cannot play with the charger Connection to the mains supply must be in accordance with the national regulations for electrical installations 6 EN TECHNICAL SPECIFICATIONS Model number 1081 Rated Voltage AC 220 240VAC 50 60Hz Charging voltage 13 8 14 4 VDC Charging current 5A max Current mains 0 65A ms at full charging current Back current drain lt 1Ah month Ripple lt 4 Ambient 20 C to 50 C output power is reduced temperature automatically at high temperatures Charger type 8 step fully automatic charging cycle Battery types 12V LiFePO4 batteries Battery capacity 5
7. s no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above i e no consequential dam ages Moreover CTEK SWEDEN AB is not obligated to any other warranty other than this warranty SUPPORT CTEK offers a professional custom support www ctek com For latest user manual see www ctek com By e mail info ctek se by telephone 46 0 225 351 80 by fax 46 0 225 351 95 CTEK PRODUCTS ARE PROTECTED BY Patents EP10156636 2 pending US12 780968 pending EP1618643 US7541778 EP1744432 EP1483817 pending SE524203 US7005832B2 EP1716626 pending SE526631 US7638974B2 EP09180286 8 pending US12 646405 pending EP1483818 SE1483818 US7629774B2 EPO9170640 8 pending US12 564360 pending SE528232 SE525604 Designs RCD 509617 US D575225 US D580853 US D581356 US D571179 CD 321216 RCD 000911839 RCD 081418 CD 001119911 0001 CD 00111991 1 0002 RCD 081244 RCD 321198 CD 321197 ZL 200830120184 0 ZL 200830120183 6 RCD 001505138 0001 RCD 000835541 0001 CD 00083554 1 0002 D596126 D596125 RCD 001705138 0001 US D29 378528 pending ZL 201030618223 7 US RE42303 US RE42230 2012 05 30 Trade marks TMA 669987 CTM 844303 CTM 372715 CTM 3151800 TMA 823341 CTM 1025831 CTM 405811 CTM 830545751 pending CTM 1935061 pending V28573IP00 CTM 2010004118 pending CTM 4 2010 500516 CTM 410713 CTM 2010 05152 pending CTM1042686 CTM 766840 pending
8. urrent defect battery STEP 6 MAXIMIZATION STEP 2 BULK Final charge with maximum voltage up to 100 battery capacity Charging with maximum current until approximately 90 battery capacity STEP 7 FLOAT STEP 3 ABSORPTION Maintaining the battery voltage at maximum level by providing a constant voltage charge Charging with declining current to maximize up to 95 battery capacity STEP 8 PULSE STEP 4 ANALYSE Maintaining the battery at 95 100 capacity The charger monitors the battery voltage Tests if the battery can hold charge Batteries that can not hold charge may need to be and gives a pulse when necessary to keep the battery fully charged replaced EN 5 SAFETY The charger is designed for charging 12V Lithium ion batteries with LiFePO4 technol ogy Do not use the charger for any other purpose Never try to charge non rechargeable batteries e Check the charger cables prior to use Ensure that no cracks have occurred in the cables or in the bend protection A charger with damaged cables must not be used A damage cable must be replaced by a CTEK representative e Never charge a damaged battery e Never charge a battery with temperature below 0 C if not specified by the battery manufacturer e Never place the charger on top of the battery when charging e Always provide for proper ventilation during charging Avoid covering the charger e All batteries fail sooner or later A battery that fails during charging is normal
Download Pdf Manuals
Related Search
Related Contents
ClosetMaid 6222 Instructions / Assembly twinpower_maintenanc.. Perception et pratique de l`environnement construit Modèle RH520 Sciences Bosch V1.0 User's Manual USER MANUAL GE Ultra-Sport Installation Guide Copyright © All rights reserved.
Failed to retrieve file