Philips NTRX900
Contents
1. start or pause play lt gt e In Disc USB A or Bluetooth mode skip to the previous or next track AUTO DJ e In USB A mode apply AUTO DJ effect automatically OF Oo e In Disc or USB A mode stop playing e In Disc or USB A mode erase programs e Exit the recording process ALB PRESET Skip to the previous or next album e Select a preset radio station MUTE e Mute or unmute volume DBB e Turn dynamic bass enhancement on or off DSC e Select a preset sound effect USB BP Il e In USB B mode start or pause play USB Bl e In USB B mode stop play VOL e Adjust volume lt b gt e Tune to radio stations e n Disc or USB A mode search within a track LIGHT e Enable or diable the speaker lighting effect USB DELETE e n USB A mode delete audio files stored on a USB storage device PROG e In Disc or USB A mode program racks e Program radio stations MODE e In Disc or USB A mode select a repeat play mode e In Disc or USB A mode play tracks randomly 3 Connect Connect FM antenna Connect the supplied FM antenna to the FM jack on the back of the main unit Connect AM antenna Note e For better reception adjust the position of the AM antenna 1 Assemble the AM loop antenna 2 gt Connect the AM loop antenna to the AM jack on the back of the main unit Connect spea2. by the application automatically and randomly e The function is only available in USB A mode Apply DJ effects manually You can also add the preset DJ effects by yourself e Press DJ EFFECT repeatedly to select an effect SCRATCH scratch e REVERB reverb BEAT BOX beat box YEAH yeah e To turn off the DJ effects press DJ EFFECT repeatedly to select OFF off e To apply the sound level of the added effects rotate the DJ EFFECT dial Note e The function is not available in USB B mode and Audio in B mode Select a preset sound effect The Digital Sound Control DSC feature enables you to enjoy special sound effects During play press DSC repeatedly to select FUNK funk POP pop FORRO forro e SERTANEJO sertanejo e SAMBA samba EN 17 Enhance bass The best Dynamic Bass Enhancement DBB setting is generated automatically for each DSC selection You can manually select the DBB setting that best suits your listening environment During play press DBB repeatedly to select DBB1 DBB2 e DBB3 DBB OFF Apply NX Bass effect NX Bass effect adds clean and lively characteristics to your music with rather low background noise 1 Open the cover on the NX Bass button 2 Press the NX Bass button The sound will change in 3 stages Stage 1 The sound volume increases to a higher level and stays at t
3. readily operable FN Warning e Never remove the casing of this device e Never lubricate any part of this device e Never place this device on other electrical equipment e Keep this device away from direct sunlight naked flames or heat Never look into the laser beam inside this device Ensure that you always have easy access to the power cord plug or adaptor to disconnect this device from the power Caution e Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user s authority to operate the equipment Your product is designed and manufactured with high quality materials and components which can be recycled and reused Never dispose of your product with other household waste Please inform yourself about he local rules on the separate collection of electrical and electronic products and batteries The correct disposal of these products helps prevent potentially negative consequences on he environment and human health Your product contains batteries which cannot be disposed of with normal household waste Please visit www recycle philips com for additional information on a recycling center in your area Environmental information All unnecessary packaging has been
4. remaining tracks are recorded Ly Play starts automatically from the beginning of the disc or the selected track and the recording starts To stop recording press i Note If the USB device does not have enough memory to store the audio files a Full memory message is displayed This function is not available in USB B and Mix sound mode This function is not available when AUTO DJ or DJ EFFECT effects are applied Play from a USB B device N A W Insert the USB plug of the device into the USB B socket Rotate the source selector to select the USB B source Slide CROSS FADER to the far right Use panel of the main unit to control play he control play panel B on the top To start pause or resume play press Pil To select an album press To select an audio file press 44 or PP To stop play press ll B To search within an audio file press and hold lt lt or PP then release to resume normal play EN 13 Play options Repeat and random play 1 In Disc or USB A mode press MODE repeatedly to select RPT ONE Repeat one Play the current track repeatedly RPT DIR Repeat directory Play all tracks in the album or folder repeatedly RANDOM Random Play all tracks randomly 2 To retum to normal play press MODE repeatedly to select OFF off Note e Shuffle play cannot be selected when you play
5. that the disc contains playable audio contents Press CD to select the disc source Slide CROSS FADER to the far left Press amp on the main unit to open the disc ray Load a disc on the disc tray with the printed side facing up un A WN Press amp on the main unit to close the disc ray e To start pause or resume play press gt Il e To stop play press i e To select another track press I or Pl To select an album press ALB PRESET e To search within a track press and hold lt lt or PP then release to resume normal play 12 EN Play from a USBA device Note e Make sure that the USB device contains playable audio contents in supported formats 1 Insert the USB plug of the device into the USB A socket Press USBA to select the USB A source Slide CROSS FADER to the far left Press ALB PRESET to select an album Press I or PI to select an audio file aouBR WN Press H to start play e To pause or resume play press H e To stop play press ll e To search within an audio file press and hold lt lt or PP then release to resume normal play Delete from a USB device 1 InUSBA mode press Il to stop music playback 2 Press I or Pl to select an audio file e To delete an audio folder press ALB PRESET to select an audio folder then press I lt or PI to select a file 3 Press USB DELETE repeatedly to se
6. 108MHz AM 531 1602kHz 9KHz 530 1700KHz 10KHz Amplifier Tuning grid 100KHz FM 9KHz 10KHz Total output power 2900W THD AM 10 Number of 30 FM 10 AM Frequency response 60 Hz 16kHz presets Signal to noise ratio gt 65 dBA FM 75ohm wire Audio In Mp3 Link 1500mV 2000mV AM loop antenna Bluetooth Disc Bluetooth version V2 0 EDR Laser type Semiconductor Supported profiles A2DPR AVRCP Disc diameter 12cm 8cm Range 10 m Free space Support disc CD DA CD R CD RW MP 3 CD General information Audio DAC 24Bits 44 1kHz Total harmonic Z1 AC power coed 240V distortion Frequency response 60Hz 16kHz ee PONN S N ratio gt 65 dBA ra consumption Standby power lt 40 W consumption USB direct Version 2 0 1 1 USB port DC 5V 500mA Dimensions Main Unit W x H x D 526 x 247 x 470 mm Weight 8 9 kg without speakers 20 EN USB playability information Compatible USB devices e USB flash memory USB 2 0 e USB flash players USB 2 0 memory cards requires an additional card reader to work with this unit Supported formats USB or memory file format FAT12 FAT16 FAT 32 sector size 512 bytes e P3 bit rate data rate 32 320 Kbps and variable bit rate e Directory nesting up to a maximum of 8 levels umber of albums folders maximum 99 umber of tracks titles maximum 999 e ID3 tag v1 2 or later e File name in Unicode UTF8 maximum ength 128 bytes Unsupported formats Empty albums an e
7. Always there to help you Register your product a T upport at www philips com suppor Gan Question Contact Philips NTRX900 User manual PHILIPS Contents 1 Important 2 Safety 2 Notice 3 2 Your Mini Hi Fi System 5 Introduction 5 What s in the box 5 Overview of the main unit 6 Overview of the remote control 8 3 Connect 9 Connect FM antenna 9 Connect AM antenna 9 Connect speakers 9 Connect LED wires for speakers 10 Connect power 10 4 Get started 11 Prepare the remote control 11 Turn on 11 5 Play 12 Play from a disc or USB 12 Play audio through Bluetooth 14 Play from an external device 15 6 Listen to radio 16 Tune to a radio station 16 Program radio stations automatically 16 Program radio stations manually 16 Select a preset radio station 16 Change AM tuning grid 16 7 Adjust volume level and sound effect 17 Adjust volume level 17 Mute sound 17 Apply AUTO DJ effect 17 Apply DJ effects manually 17 Select a preset sound effect 17 Enhance bass 18 Apply NX Bass effect 18 Adjust equalizer settings 18 8 Other features 12 Mix sound 19 Speak or sing with a microphone 19 Turn the decorative light on or off 19 Listen through a headphone 19 9 Product information 20 Specifications 20 USB playability information 21 Supported MP3 disc formats 21 Maintenance 21 10 Troubleshooting a General 22 About Bluetooth device 23 EN 1 Important Safety CAUTION RISK OF ELECTRIC S
8. HOCK DO NOT OPEN coum This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth OOOO Install in accordance with the manufacturer s instructions N EN Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachment
9. ally Program radio stations manually 1 Tune to a radio station 2 Press PROG to activate the program mode L gt A position number is displayed 3 Press ALB PRESET to allocate a number to this radio station then press PROG to confirm 4 Repeat steps 1 3 to program other stations Tip e To overwrite a programmed station store another station in its place Select a preset radio station In tuner mode press ALB PRESET to select a preset number Change AM tuning grid In some countries the AM radio frequency step between adjacent channels is 10 kHz or 9 kHz e In AM tuner mode press and hold ll for 5 seconds L gt The frequency step is changed to 9 kHz or 10 kHz L gt All preset stations are erased and re programmed in AM mode 7 Adjust volume level and sound effect Adjust volume level During play press VOL to increase or decrease volume Mute sound During play press MUTE to mute or unmute sound Apply AUTO DJ effect The AUTO DJ function adds various sound and playback effects to your music automatically e To apply AUTO DJ effects press AUTO DJ repeatedly to select between e METAL Metal and e PARTY party e To turn off the AUTO DJ effects press AUTO DJ repeatedly to select OFF Off e To adjust the occurrence frequency and sound level of the added effects rotate the DJ EFFECT dial Note These effects are added
10. e A and Source B channels during playback Speak or sing with a microphone With this unit you can speak or sing to a music source with a microphone 1 Tum the MIC VOL knob to the minimum level 2 gt Connect a microphone not supplied to the MIC 1 or MIC 2 socket on the top panel 3 Press CD TUNER USB A AUDIO A or AUX to select a source and start play 4 Sing through the microphone e To adjust the volume of the source press VOL e To adjust the volume of the microphone turn the MIC VOL knob Turn the decorative light on or off In power on mode press LIGHT repeatedly to adjust the decoration light around the loudspeakers or turn the light off Listen through a headphone Note e When you listen through a headphone the loudspeaker cannot be muted Plug a headphone into the socket on the top panel of the main unit Rotate the OUTPUT knob to select an audio source Source A or Source B Rotate the VOL knob to adjust the headphone volume w N EN 19 9 Product Speakers Speaker 4x4 ohm information o Subwoofer DEMO Tweeter 251 Note Woofer Peach e Product information is subject to change without prior Dimensions notice WxHxD 667 9 x 1131 9 x 547 2 mm Weight 62 kg each i Tuner Specifications Tuning range FM 87 5
11. finalized CD or correct format disc Cannot display some files in USB device e The number of folders or files in the USB device has exceeded a certain limit This phenomenon is not a malfunction e The formats of these files are not supported USB device not supported e The USB device is incompatible with the unit Try another one Cannot apply sound effects when playing from a USB B device USB B mode does not support DBB DSC DJ EFFECT or AUTO DJ effects Cannot delete files from a USB B device e USB B mode does not support USB Delete function Poor radio reception e Increase the distance between the unit and other electrical appliances e Adjust the position of the antenna for better reception About Bluetooth device The audio quality is poor after connection with a Bluetooth enabled device e The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between them Cannot connect with the device e The Bluetooth function of the device is not enabled Refer to the user manual of the device for how to enable the function e This product is already connected with another Bluetooth enabled device Disconnect that device and then try again The paired device connects and disconnects constantly e The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between them For some devices Bluetoot
12. h connection may be deactivated automatically as a power saving feature This does not indicate any malfunction of this product EN 23 PHILIPS 2014 WOOX Innovations Limited All rights reserved This product was brought to the market by WOOX Innovations Limited or one of its affiliates further referred to in this document as WOOxX Innovations and is the manufacturer of the product VWWOOX Innovations is the warrantor in relation to the product with which this booklet was packaged Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V NTRX900_78_UM_V3 0
13. his level for 5 seconds L gt FIRING firing is displayed e Stage 2 The sound volume gradually decreases to its original level in 10 seconds i gt DISCHARGE discharge is displayed Stage 3 The sound volume keeps at normal level for 40 seconds If you press NX Bass button again RECHARGE recharge is displayed Adjust equalizer settings Custom Equalizer lets you increase or decrease the gain for specific frequency ranges and adjust audio output to your own preferences d Press CUSTOM on the main unit 2 Move the slider bars to adjust the equalizer settings for each of the 5 frequency ranges 8 Other features Mix sound You can play from Source A Disc USB A Bluetooth Tuner Audio in A mode and from Source B USB B Audio in B mode at the same time 1 Play from Source A Disc Select the CD source and play a track in the loaded disc e TJuner Tune to a radio station e Audio in A Select the Audio in A source and play audio on the connected external device e USB A Select the USB A source and play audio on the connected USB A device e Bluetooth Connect a Bluetooth device and then play audio on the device 2 Play from Source B e Audio in B Select the Audio in B source and then play audio on the connected external device e USB B Select the USB B source and then play audio on the connected USB B device 3 Use the CROSS FADER control to adjust the balance between Sourc
14. kers Note For optimal sound quality use the supplied speakers only Connect only speakers with impedance that is the same or higher than the supplied speakers refer to the Specifications section of this manual e Make sure that the colors of the speaker wires and terminals are matched EN 9 Connect the main speakers 1 Find the MAIN SPEAKERS sockets on the back panel of the main unit 2 Insert the right speaker NTRX900SA wires to R and left speaker NTRX900SB wires to L Connect the sub woofers 1 Find the SUB WOOFER sockets on the back panel of the main unit 2 Insert the connectors of the sub woofer wires into the SUBWOOFER sockets Connect LED wires of speakers 1 Find the LED sockets on the back of the main unit 2 Insert the connector of the LED wire into the corresponding LED socket 3 Repeat steps 1 2 to connect the other LED wire of the speaker Connect power Caution Risk of product damage Make sure that you have selected the power supply voltage that corresponds to your local power supply Risk of electric shock When you unplug the power cord always pull the plug from the socket Never pull the cord Note Before connecting to AC power make sure that you have completed all other connections Do not plug AC power cord wi
15. lect DEL FILE Delete file Delete current audio file DEL DIR Delete directory Delete current audio folder FORMAT Format Delete all files in the USB device 4 Press PB I to confirm the selection Ly A confirmation message is displayed To cancel press I Note e The function is not available in USB B mode Caution e If FORMAT is selected all files including non audio files stored in the USB device will be erased Record to a USB device MP3 files radio and audio from external devices are recorded in mp3 format The first time you record to a USB device a folder is automatically created on the USB device Each time you record to a USB device the recorded files are stored in a subfolder of this folder Files and subfolders are named numerically in the order in which they are created 1 Connect a USB device to USB A socket 2 Prepare the source to record from Disc Select the CD source and load a disc then select a track to start recording Radio Tune to a radio station AUDIO IN AUX Select the Audio in or AUX source then connect and play from an external device USB B Select USB B source then connect and select an audio file to play 3 Press USB RECORD to start recording For Disc mode press USB RECORD to cycle through REC ONE record one the first or current track is recorded REC ALL record all all tracks or the
16. mpty album is an album that does not contain MP3 files and is not be shown in the display e Unsupported file formats are skipped For example Word documents doc or MP3 files with extension dlf are ignored and not played AAC WAYV PCM audio files e WMA files Supported MP3 disc formats ISO9660 Joliet e Maximum title number 999 depending on file name length Maximum album number 99 Supported sampling frequencies 32 kHz 44 1kHz 48 kHz e Supported Bit rates 32 320 kbps variable bit rates ID3 tag v1 2 or later e Directory nesting up to a maximum of 8 levels Maintenance Clean the cabinet Use a soft cloth slightly moistened with a mild detergent solution Do not use a solution containing alcohol spirits ammonia or abrasives Clean discs When a disc becomes dirty clean it with a cleaning cloth Wipe the disc from the centre out e Do not use solvents such as benzene thinner commercially available cleaners or antistatic spray intended for analogue records Clean the disc lens e After prolonged use dirt or dust may accumulate at the disc lens To ensure good play quality clean the disc lens with Philips CD lens cleaner or any commercially available cleaner Follow the instructions supplied with cleaner EN 21 10 Troubleshooting Caution e Never remove the casing of this unit To keep the warranty valid never try to repair the sy
17. omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment The making of unauthorized copies of copy protected material including computer programs files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes This apparatus includes this label CLASS 1 LASER PRODUCT Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth EN 3 SIG Inc and any use of such marks by WOOX Innovations is under license Note e The type plate is located on the back of the unit 4 EN 2 Your Mini Hi Fi System Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www Philips com welcome Introduction With this unit you can e enjoy audio from discs USB storage devices Bluetooth enabled devices or other external devices e swap play between the dual audio sources with the cross fader e listen to FM or AM radio stations e speak or sing
18. s accessories specified by the manufacturer a Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over IS O Unplug this apparatus during lightning storms or when unused for long periods of time 3 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Battery usage CAUTION To prevent battery leakage which may result in bodily injury property damage or damage to the unit e Install all batteries correctly and as marked on the unit Do not mix batteries old and new or carbon and alkaline etc e Remove batteries when the unit is not used for a long time e Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like 45 Apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles O Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain
19. stem yourself If you encounter problems when using this unit check the following points before requesting service If the problem remains unsolved go to the Philips web site www philips com support When you contact Philips ensure that your unit is nearby and the model number and serial number are available General No power e Make sure that the AC power plug of the unit is connected properly e Make sure that there is power at the AC outlet No sound or poor sound e Adjust the volume Check that the speakers are connected correctly Check if speakers are muted Press MUTE to restore sound Left and right sound outputs reversed Check the speaker connections and location No response from the unit Disconnect and reconnect the AC power plug then turn on the unit again 22 EN Remote control does not work e Before you press any function button first select the correct source with the remote control instead of the main unit Reduce the distance between the remote control and the unit e Insert the batteries with their polarities signs aligned as indicated e Replace the batteries e Aim the remote control directly at the sensor on the front of the main unit No disc detected e Insert a disc e Check if the disc is inserted upside down e Wait until the moisture condensation at the lens has cleared e Replace or clean the disc e Use a
20. the programmed tracks Program tracks You can program a maximum of 40 tracks 1 In Disc or USB A mode press Il to stop playing 2 Press PROG to activate the program mode L gt A number flashes on the screen For MP3 tracks press ALB PRESET to select an album Press I or PI to select a track number hen press PROG to confirm selection Repeat steps 3 to 4 to program other racks an mn A WwW Press gt H to play the programmed track e To erase the program press Ill twice Note e The function is not available in USB B mode 14 EN Play audio through Bluetooth The unit uses Bluetooth wireless technology to stream music from your Bluetooth device to the system WOOxX Innovations does not guarantee the compatibility with all Bluetooth devices e Before pairing a device with this unit read its user manual for Bluetooth compatibility The effective operation range between the unit and a Bluetooth device is approximately 10 meters 30 feet The unit can memorize a maximum of 8 paired devices Any obstacle between the unit and a Bluetooth device can reduce the operational range e Keep away from any other electronic device that may cause interference 1 Slide CROSS FADER to the far left 2 Press Bluetooth to turn on the Bluetooth function of the unit L gt The LED indicator on the button blinks n your Bluetooth device enable 3 Onyour BI h devi bl Blue
21. thin one minute after unplugging it in case the product will be powered off automatically due to high power component protection 1 Adjust the voltage selector on the bottom of the main unit to match your local power supply 2 Connect the AC power plug to the power outlet 4 Get started Caution e Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Always follow the instructions in this chapter in sequence If you contact Philips you will be asked for the model and serial number of this apparatus The model number and serial number are on the back of the apparatus Write the numbers here Model No Serial No Prepare the remote control Note Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type e Batteries contain chemical substances so they should be disposed of properly To replace the remote control battery 1 Open the battery compartment 2 Insert two AAA batteries with correct polarity as indicated 3 Close the battery compartment Turn on Press L gt The unit switches to the last selected source Switch to standby mode Press to switch the unit to standby mode EN 11 5 Play Play from a disc or USB Play disc Note e Make sure
22. tooth and search for Bluetooth devices refer to the user manual of the device 4 When PHILIPS NX9 Philips NX9 is displayed on your device select it to start pairing and connection If necessary enter default password 0000 L gt After successful pairing and connection the LED indicator turns solid blue 5 Play audio on your device L gt Audio streams from your device to the unit e To start pause or resume play press gt II e To select another track press I lt or Pl To disconnect the Bluetooth enabled device e Disable Bluetooth on your device or e Move the device beyond the communication range To connect another Bluetooth enabled device 3 Play audio on the device refer to the user e Disable Bluetooth on the current device manual of the device and then connect another device Play from an external device You can play audio from an external device through the speakers of this unit Play from an MP3 player 1 Press AUDIO A to select the MP3 link source 2 Slide CROSS FADER to the far left 3 Connect an audio input cable not supplied with a 3 5 mm connector on both ends to e the AUDIO INA socket on the unit and e the headphone socket on the MP3 player 4 Play audio on the MP3 player refer to its user manual Tip e Ifthe MP3 player is connected to the AUDIO IN B socket rotate the source selector on the main unit to select the Audio In B source Pla
23. udio in A mode apply DJ effects manually AUTO DJ e In USB A mode apply AUTO DJ effect automatically MIC VOL knob e Adjust microphone volume VOL knob e Adjust the headphone volume M OUTPUT knob e Switch headphone output between Source A and Source B REC e In USB A mode record to a USB device USB A USB B Connect USB mass storage devices DELETE e n USB A mode delete audio files stored on a USB device Q Connect a headphone AUDIO INA B e Audio input jack 3 5mm for an external audio device MIC 1 2 Microphone ports e Jack for a microphone Bluetooth indicator Sound effect keys Select a preset sound effect DBB e Turn dynamic bass enhancement on or off oE e Enable or diable the speaker lighting effect NX Bass e Turn on NX Bass effect D Custom Equalizer e In CUSTOM mode adjust the equalizer settings for each of the 5 frequency ranges by moving the slider bars VOLUME knob e Adjust volume of the speakers CROSS FADER e Adjust the channel balance between Source A and Source B during playback Source selector e Select an audio source EN 7 Overview of the remote control OOO GO OOO O eo 0O OO8OS O Turn on the unit or switch to standby mode Source selection keys e Select an audio source USB RECORD e n USB A mode record to a USB device Pil e In Disc USB A or Bluetooth mode
24. with microphones through the loudspeakers of the unit and e record to a USB storage device To enrich sound this unit offers you these sound effects Digital Sound Control DSC Dynamic Bass Boost DBB DJ effects e NX Bass Enhancement What s in the box Check and identify the following box contents e Main unit x 1 e Speaker box x 2 e Remote control with 2 AAA batteries e FM wire antenna x 1 e AM loop antenna x 1 e Short user manual EN Overview of the main unit EGODOLLO OO OO OOOO PHILIPS ae ji 1 soune o e Power on the unit or switch to standby mode Q Control play panel B e Control play for USB B mode G E B e In USB B mode stop playing O Display panel e Show status Disc tray ma e In Disc or USB A mode stop playing e n Disc or USB A mode erase programs e Exit the recording process e n tuner mode switch between FM and AM bands D Control play panel A e Control play for Source A modes including Disc USB A Bluetooth and Tuner modes AUX e Select an audio source from an external device DVD PC TV or GAME player 0 00O 7 e Eject the disc DJ EFFECT dial e Adjust the sound level of DJ effects DJ EFFECT e In CD USB A Bluetooth Tuner or A
25. y from other audio device You can connect a PC or other audio devices to this unit 1 Press AUX repeatedly to cycle through GAME PC IN TV and DVD sources 2 Connect the white and red audio cables not supplied to e the AUX sockets on the back of the main unit e the headphone socket on a PC or the AUDIO OUT socket on an external device EN 15 6 Listen to radio Tune to a radio station Tip Keep the unit away from other electronic devices to avoid radio interference e For better reception fully extend and adjust the position of the antenna Slide CROSS FADER to the far left Press TUNER on the remote control or I A on the main unit repeatedly to select FM or AM tuner 3 Press and hold lt 4 or PP for 2 seconds tL SEARCH search is displayed L gt The radio tunes to a station with strong signal automatically N ea 4 Repeat step 3 to tune to more stations e To tune to a station manually press lt 4 or bP repeatedly until you find optimal reception Program radio stations automatically Note You can program a maximum of 30 FM and 10 AM radio stations In tuner mode press and hold PROG for 2 seconds to activate automatic program mode L gt AUTO auto is displayed L gt The unit stores radio stations with sufficient signal strength automatically L gt After all available radio stations are stored the first stored radio station is broadcast automatic
Download Pdf Manuals
Related Search