Foster S4000.Line.IS.3.Bridge
Contents
1. and timer setting zone To select the power with the slider slide your finger on the SLIDER zone You can already have a direct access if you put your finger directly on the chosen level Power selection zone SLIDER and timer setting zone a Direct access SLIDER Starting up e Startup switch off the hob Action Control panel Display To start press key O l 0 To stop press key O l nothing or H e Startup switch off a heating zone Action Control panel Display To set slide on the SLIDER 1 to P adjust the power to the right or to the left To stop slide to 0 on SLIDER O or H lf no action is made within 20 second the electronics returns in waiting position Pan detection The pan detection ensures a perfect safety The induction doesn t work e lf there is no pan on the heating zone or if this pan is not adapted to the induction In this case it is impossible to increase the power and the display shows U This symbol disappears when a pan is put on the heating zone e lf the pan is removed from the heating zone the operation is stopped The display shows U The symbol U disappears when the pan is put back to the heating zone The cooking continues with the power level set before After use switch the heat element off don t let the pan detection U active 23 Residual heat indication After the switch off of a heating zone or the com2. 0 Select the Timer Press simultaneously key and 000 from the timer Decrease the time Press key from the timer 60 to 59 58 Increase the time Press key from the timer Time increase After a few seconds the min display stops with blinking The time is confirmed and the timer starts e Automatic stop at the end of the cooking time As soon as the selected cooking time is finished the timer displays blinking 000 and a sound rings To stop the sound and the blinking press the key and Automatic cooking All the cooking zones are equipped with an automatic cooking device The cooking zone starts at full power during a certain time and then reduces automatically its power on the pre selected level e Start up Action Control panel Display Power level selection slide on the SLIDER to 7 7 is blinking with A for example 7 and stay 3s e Switching off the automatic cooking Action Control panel Display Power level selection slide on the SLIDER O to 9 Stop amp Go function This function brakes all the hob s cooking activity temporarily and allows restarting with the same settings e Start up stop the pause function Action Control panel Display Engage pause press Il IT and control light on Stop the pause press II Slider animated Press on the animated slider previous settings 25 Recall Function After switching off the hob 0
3. Foster a Live the Quality MANUALE D ISTRUZIONE user s manual notice d utilisation Bedienungsanleitung Dear customer Thank you for having chosen our induction ceramic hob In order to make the best use of your appliance we would advise you to read carefully the following notes and to keep them for a later consulting SUMMARY SAFE ects RR RR RR 19 PRECAUTIONS BEFORE USING at sians fw tidi n ke kk at ia a ik l ak leale 19 SING RE Aer IAIN Ge stil tt tn aaa ko ay tal iure varia ata ja ka ta e pa el al ke a ape sal ka a aa ka 19 PRECAUTIONS NOT TO DAMAGE THE APPLIANCE a 20 PRECAUTIONS IN CASE OF APPLIANCE FAILURE ccececcecececccceccccaceccccacuceceacececcacsteuaceneaeaceneaeacenes 20 OTHER PROTEGTONS iz A A A l e nn ka a a n e 20 DESCRIPTION OF THE APPLIANCE 0 kata tt kt teka nn nn nn nn nn n nana nan nana nana na aaa anaasanaseasansoensansosnsanaonn 21 TECHNICAL CHARACTERISTICS cccececcccecececcaceccccccececcaceccauaceceecceseaeaceneaeaceneacstentacsteceaesneceaeeneatas 21 CONTROEPANER ee ee re see ee tee 21 USEOBPTHEAPPLIANCE i dicci 21 DPI LIL 21 W ENT NA WON ii 22 STARTING UP AND APPLIANCE MANAGEMENT M anne anana aaa aanaasanansosanansasananannnnann 22 BEFORE THE FIRST USE Li 22 INDUCTON PRINCIPEE eci rea een ae ai re ake n ae kel 22 SENS NW TOUCH stati kl ta a ak l tan e w k a a ai RENT RETTEN 22 POWER SELECTION ZONE SLIDER AND TIM
4. The display is blinking on 9 during a few seconds and then shows the maximum of power allowed Heating zone selected The other heating zone example Booster level 9 P is displayed 9 goes to 6 or 8 depending the type of zone Timer The timer is able to be used simultaneous with all heating zones and this with different time settings from 0 to 999 minutes for each heating zone e Setting and modification of the cooking time Action Control panel Display Select the power level slide on the SLIDER 1 to P Select theTimer Press simultaneously key and Timer display on from the timer until the desired display is on Decrease the time Press key from the timer 60 to 59 58 Increase the time Press key from the timer Time increase After a few seconds the min display stops with blinking The time is confirmed and the timer starts 24 e Tostopthe cooking time Action Control panel Display Select the Timer Press simultaneously key and Timer display on from the timer until the desired display is on Stop the time Press key from the timer 000 lf several timers are activated repeat the process e Egg timer function Egg timer is an independent function It stops as soon as a heating zone starts up If the egg timer is on and the hob is switched off the timer continues until time runs out Action Control panel Display Activate the hob press display 0 I
5. I it is possible to recall the last settings e cooking stages of all cooking zones Booster e minutes and seconds of programmed cooking zone related timers e Keep warm function e Automatic cooking The recall procedure is following e Press the key 0 I e Then press Il before the light stops blinking The previous settings are again active Keep warm Function This function allows the reach and automatically maintains at the temperature of 42 70 or 94 C This will avoid liquids overflowing and fast burning at the bottom of the pan e To engage to start the function Keep warm Action Control panel Display 42 C to engage Press once on key 22 U and 70 C to engage 94 C to engage To stop Press twice on key 28 Press 3 times on key 28 Slide on the SLIDER U and 4 U and 22 O to 9 or press key 1 until 0 0 The maximum duration of keeping warm is 2 hours Bridge Function This function allows the use of 2 cooking zones at the same time left zones middle zones right zones with the same features as a single cooking zone Booster function isn t allowed Action Control panel Display Activate the hob Press display 0 I 0 Activate the bridge Press simultaneously on 3 o and N of the 2 cooking zones Increase bridge Slide on the SLIDER 1 to 9 witch indicates the power Stop the bridge Press simultaneously on 3 0 of the 2 cooking zones Control
6. as phase L2 Before making the connection we strongly advise you to locate the phase s neutral and earth on the mains If you have any doubts call your electrician Caution Be careful that the cables are correctly engaged and tightened We cannot be held responsible for any incident resulting from incorrect connection or which could arise from the use of an appliance which has not been earthed or has been equipped with a faulty earth connection 32 Foster spa 42041 Brescello RE Italy tel 39 0522 687425 tel Servizio Assistenza 39 0522 684450 fax 39 0522 686019 fax Servizio Ricambi 39 0522 962166 e mail service fosterspa com www fosterspa com 15945 0
7. panel locking To avoid modification of the setting of the cooking zones in particular during cleaning the control panel can be locked with exception to the On Off key 0 1 Action Locking the hob Unlock the hob Control panel Press during 6s Press during 6s 26 Display locking light on locking light off COOKING ADVICES Pan quality Adapted materials steel enamelled steel cast iron ferromagnetic stainless steel aluminium with ferromagnetic bottom Not adapted materials aluminium and stainless steel without ferromagnetic bottom cupper brass glass ceramic porcelain The manufacturers specify if their products are compatible induction To check if pans are compatibles e Put a little water in a pan placed on an induction heating zone set at level 9 This water must heat in a few seconds e A magnet stucks on the bottom of the pan Certain pans can make noise when they are placed on an induction cooking zone This noise doesn t mean any failure on the appliance and doesn t influence the cooking operating The pans must be certified by the manufacturer as compatible with induction hobs However it is possible that certain pans even though declared compatible may have characteristics which are not adapted to be used with induction hobs We recommend to verify when purchasing the pans that they respect at least the following conditions fthe bottom of the pan Qd is significantl
8. ER SETTING ZONE 23 SIARIINGUP Ellie 23 PANIDETECTION hire 23 RESIDUAL HEAT INDICATION assiali a a 24 BOOSTER AND TWIN BOOSTER FUNCTION L kk kt kt kk te e LL 24 Pepoli ii eil e e en re en abi a aa 24 AUTOMATIC COOKIN Giai riad a kale N a ka acta pen A ee A kaa kan en a ne ia A ank eke Dees die Ree A aa A 25 STOP amp GO FUNCTION sessione eda 25 RECAEGFUNGION lle n e e e a n a e eka ek e na ot erate 26 KEEP WARM FUNCTION cccececcececcccecceccaceccacececceccatenceneateneaueceeneaeeneaueeaneneentauentauenesneaeentanentanes 26 BRIGEPUNGCIION snelle 26 CONTROLE PANEL LOCKING 222222 eni ia tai 26 COOKING ADVICES Q 0 cccccccccccececcncececencecenencececenceseceaseaeneaeeeeneaeeaeneuseneneeseaeneessaeaeeascenseaenenesasneaes 27 KE ANKO AE EY Se n oo e n au n mato ET 27 PAN DIMENSION agli 28 EXAMPLES OF COOKING POWER SETTING nnan n nannan a ranana annann nananana nnen nn nann 28 MAINTENANCE AND CLEANING Lt tt tt kn enn nn nn n nn nn n nn nn nannan nn ann nn nn nun nn un nnn un nn nun un un nnnanunnnnanunnnn nen 29 WHAT TO DO IN CASE OF A PROBLEM unuunuuunnnananannnnnnnnnnnnnnnnnnnnnnnnnunnnnnnannnnnnanunnnnanun nn 29 ENVIRONMENT PRESERVATION s sxxs sxssssssssasaseneosazeneonenenaozanene osa ne nananana 30 INSTALLATION INSTRUCTIONS k0 tt kt tk tt knn nn nn n nn ann na annan aaa aaa iii iii 31 ELEGIRIGALCONNEGIION sessili 32 SAFETY Precautions before u
9. ON OF THE APPLIANCE Technical characteristics Position of Booster Minimum Total l Nominal Booster i l Type the heating Diameter a Twin diameter Power Power Booster x zone Booster detection 260 mm 7370245 7400 W 180 x 220 mm 180 x 220 mm The given power may change according to the dimensions and material of the pan Control panel Timer Keep warm Bridge Timer display displays display display Power display Ki Li Li pa DO N X m Z N Y e 1 WO IP MO IP LAI ar selection oe kon selection sel ar rear zone Keep warm key warm key e front zone Locking key On Off key USE OF THE APPLIANCE Display Display Designation Description 0 Zero The heating zone is activated 1 9 Power level Selection of the cooking level U No pan detection No pan or inadequate pan A Heat accelerator Automatic cooking E Error message Electronic failure H Residual heat The heating zone is hot P Booster The Power is activated on Twin Booster The Super power is activated U Keep warm Maintain automatically of 42 70 or 94 C Il Stop8Go The hob is in pause 21 Ventilation The cooling system is fully automatic The cooling fan starts with a low speed when the calories brought out by the electronic system reach a certain level The ventilation starts his high speed when the hob is intensively used The cooling fan reduces his speed and stops automatically when the electronic circuit is cooled en
10. ated under the embedded appliance make sure the space between the content of the drawer and the inferior part of the appliance is large enough 2 cm This is essential to guaranty a correct ventilation Never put any inflammable object ex sprays into the drawer situated under the vitroceramic hob The eventual cutlery drawers must be resistant to heat Precautions in case of appliance failure If a defect is noticed switch on the appliance and turn off the electrical supplying If the ceramic glass is cracked or fissured you must unplug the appliance and contact the after sales service Repairing has to be done by specialists Do not open the appliance by yourself WARNING If the surface is cracked switch off the appliance to avoid the possibility of electric shock Other protections Note sure that the container pan is always centred on the cooking zone The bottom of the pan must have to cover as much as possible the cooking zone For the users of pacemaker the magnetic field could influence its operating We recommend getting information to the retailer or of the doctor Do not to use aluminium or synthetic material containers they could melt on still hot cooking zones THE USE OF EITHER POOR QUALITY POT OR ANY INDUCTION ADAPTOR PLATE FOR NON MAGNETIC COOKWARE RESULTS IN A WARRANTY BREACH AN IN THIS CASE THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE HOB AND OR ITS ENVIRONMENT 20 DESCRIPTI
11. ject except heating containers on the glass surface In case of untimely engaging or residual heat this one may heat melt or even burn Never cover the appliance with a cloth or a protection sheet This is supposed to become very hot and catch fire This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance 19 Precautions not to damage the appliance Raw pan bottoms or damaged saucepans not enamelled cast iron pots may damage the ceramic glass Sand or other abrasive materials may damage ceramic glass Avoid dropping objects even little ones on the vitroceramic Do not hit the edges of the glass with saucepans Make sure that the ventilation of the appliance works according to the manufacturer s instructions Do not put or leave empty saucepans on the vitroceramic hobs Sugar synthetic materials or aluminium sheets must not contact with the heating zones These may cause breaks or other alterations of the vitroceramic glass by cooling switch on the appliance and take them immediately out of the hot heating zone be careful do not burn yourself Never place any hot container over the control panel If a drawer is situ
12. lations and which respects them scrupulously e Protection against the parts under tension must be ensured after the building in e The data of connection necessary are on the stickers place on the hob casing near the connection box e The connection to the main must be made using an earthed plug or via an omnipolar circuit breaking device with a contact opening of at least 3 mm e The electrical circuit must be separated from the network by adapted devices for example circuit breakers fuses or contactors e f the appliance is not fitted with an accessible plug disconnecting means must be incorporated in the fixed installation in accordance with the installation regulations e The inlet hose must be positioned so that it does not touch any of the hot parts of the hob or oven Caution This appliance has only to be connected to a network 230 V 50 60 Hz Connect always the earth wire Respect the connection diagram Cable diameter Protection calibre HO5 VV F 2 rere Seer CORRONO S AT HOS VV F H 05 RR F calculated with the simultaneous factor following the standard EN 60 335 2 6 1990 Connection of the hob Monophase 230V 1P N Use the green yellow cable as heart cable the blue and the brown cable as neutral N and the black and the grey cable as phase L Biphase 400V 2P N Use the green yellow cable as heart cable the blue and the brown cable as neutral N the grey cable as phase L1 and the black cable
13. ort in which the hob is to be fitted as well as the edges of furniture the laminate coatings and the glue used to fix them must be able to resist temperatures of up to 100 C The mural rods of edge must be heat resisting Not to install the hob to the top of a not ventilated oven or a dishwasher To guarantee under the bottom of the hob casing a space of 20 mm to ensure a good air circulation of the electronic device lf a drawer is placed under the work avoid to put into this drawer flammable objects for example sprays or not heat resistant objects Materials which are often used to make worktops expand on contact with water To protect the cut out edge apply a coat of varnish or special sealant Particular care must be given to applying the adhesive joint supplied with the hob to prevent any leakage into the supporting furniture This gasket guaranties a correct seal when used in conjunction with smooth work top surfaces The safety gap between the hob and the cooker hood placed above must respect the indications of the hood manufacturer In case of absence of instructions respect a distance minimum of 760 mm The connection cord should be subjected after building with no mechanical constraint such for example of the fact of the drawer 31 ELECTRICAL CONNECTION e The installation of this appliance and the connection to the electrical network should be entrusted only to an electrician perfectly to the fact of the normative regu
14. ough STARTING UP AND APPLIANCE MANAGEMENT Before the first use Clean your hob with a damp cloth and then dry the surface thoroughly Do not use detergent which risks causing blue tinted colour on the glass surface Induction principle An induction coil is located under each heating zone When it is engaged it produces a variable electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the pan The result is a heating up of the pan located on the heating zone Of course the pan has to be adapted e All ferromagnetic pans are recommended please verify it thanks a little magnet cast iron and steel pans enamelled pans stainless steel pans with ferromagnetic bottoms e Are excluded cupper pure stainless steel aluminium glass wood ceramic stoneware The induction heating zone adapts automatically the size of the pan With a too small diameter the pan doesn t work This diameter is varying in function of the heating zone diameter If the pan is not adapted to the induction hob the display will show U Sensitive touch Your ceramic hob is equipped with electronic controls with sensitive touch keys When your finger presses the key the corresponding command is activated This activation is validated by a control light a letter or a number in the display and or a beep sound In the case of a general use press only one key at the same time 22 Power selection zone SLIDER
15. plete stop of the hob the heating zones are still hot and indicates H on the display The symbol H disappears when the heating zones may be touched without danger As far as the residual heat indicators are on light don t touch the heating zones and don t put any heat sensitive object on them There are risks of burn and fire Booster and Twin Booster function Booster P and Twin Booster 11 11 grant a boost of Power to the selected heating zone If this function is activated the heating zones work during 10 minutes with an ultra high Power This is foreseen for example to heat up rapidly big quantities of water like nuddles e Start up Stop the Booster Action Control panel Display Start up the Booster Slide to the end of the SLIDER P Or press directly on the end of the SLIDER Stop the Booster Slide on the SLIDER 9 to 0 e Start up Stop Super Power Action Control panel Display Start up the Booster Slide to the end of the SLIDER P Or press directly on the end of the SLIDER Start up Twin Booster Re press key P u 11 and P Stop the Twin Booster Slide on the SLIDER P to 0 Stop Booster Slide on the SLIDER 9 to 0 e Power management The hole cooking hob is equipped with a maximum of Power When the Booster function is activated and in order to exceed the maximum Booster the electronic system orders to reduce automatically the power level of an other heating zone
16. sing Unpack all the materials The installation and connecting of the appliance have to be done by approved specialists The manufacturer can not be responsible for damage caused by building in or connecting errors To be used the appliance must be well equipped and installed in a kitchen unit and an adapted and approved work surface This domestic appliance is exclusively for the cooking of food to the exclusion of any other domestic commercial or industrial use Remove all labels and self adhesives from the ceramic glass Do not change or alter the appliance The cooking plate can not be used as freestanding or as working surface The appliance must be grounded and connected conforming to local standards Do not use any extension cable to connect it The appliance can not be used above a dishwasher or a tumble dryer steam may damage the electronic appliances Using the appliance Switch the heating zones off after using Keep an eye on the cooking using grease or oils that may quickly ignite Be careful not to burn yourself while or after using the appliance Make sure no cable of any fixed or moving appliance contacts with the glass or the hot saucepan Magnetically objects credit cards floppy disks calculators should not be placed near to the engaged appliance Metallic objects such as knives forks spoons and lids should not be placed on the hob surface since they can get hot In general do not place any metallic ob
17. the chapter Stop amp Go ENVIRONMENT PRESERVATION e The materials of packing are ecological and recyclable e The electronic appliances are composed of recyclable and sometimes harmful materials for the environment but necessary to the good running and the safety of the appliance Don t throw your appliance with the household refuses Get in touch with the waste collection centre of your commune that is adapted to the recycling of the household appliances 30 INSTALLATION INSTRUCTIONS The installation comes under the exclusive responsibility of specialists The installer is held to respect the legislation and the standards enforce in his home country How to stick the gasket The gasket supplied with the hob avoids all infiltration of liquids in the cabinet His Installation has to be done carefully in conformity of the following drawing Stick the gasket 2 two millimeters from the external edge of the glass after removing the protection sheet 3 Fitting installing The cut out sizes are 7330245 810 x 325 mm Ensure that there is a distance of 50 mm between the hob and the wall or sides The hobs are classified as Y class for heat protection Ideally the hob should be installed with plenty of space on either side There may be a wall at the rear and tall units or a wall at one side On the other side however no unit or divider must stand higher than the hob The piece of furniture or the supp
18. ucepans will scratch the surface e Spillages of sugar jam jelly etc must be removed immediately You will thus prevent the surface being damaged WHAT TO DO IN CASE OF A PROBLEM The hob or the cooking zone doesn t start up The hob is badly connected on the electrical network The protection fuse cut off The looking function is activated The sensitive keys are covered of grease or water An object is put on a key The control panel displays U e There is no pan on the cooking zone e The pan is not compatible with induction e The bottom diameter of the pan is too small The control panel displays E e The electronic system is defective e Disconnect and replug the hob e Call after sales One or all cooking zone cut off The safety system functioned You forgot to cut off the cooking zone for a long time One or more sensitive keys are covered The pan is empty and its bottom overheated The hob also has an automatic reduction of Booster level and breaking Automatic overheating Continuous ventilation after cutting off the hob e This is not a failure the fan continuous to protect the electronic device e The fan cooling stops automatically The automatic cooking system doesn t start up e The cooking zone is still hot H e The highest Booster level is set 9 The control panel displays U e Refer to the chapter Keep warm 29 The control panel displays ll e Refer to
19. y smaller than the diemeter of the body OD the performance will not be good and the pan might not be identified by the plate 21 Pan dimension The cooking zones are until a certain limit automatically adapted to the diameter of the pan However the bottom of this pan must have a minimum of diameter according to the corresponding cooking zone To obtain the best efficiency of your hob please place the pan well in the centre of the cooking zone Examples of cooking power setting the values below are indicative Reheating Dishes prepared beforehand Defrosting Dried vegetables fish frozen products 4t05 Water Steamed potatoes soups pasta fresh vegetables Simmering Goulash roulade tripe Boiling water Water Boiling water Boiling significant quantities of water 28 MAINTENANCE AND CLEANING Switch off the appliance before cleaning Do not clean the hob if the glass is too hot because they are risk of burn e Remove light marks with a damp cloth with washing up liquid diluted in a little water Then rinse with cold water and dry the surface thoroughly e Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches must be absolutely avoided e Do not ever use any steam driven or pressure appliance e Do not use any object that may scratch the ceramic glass e Ensure that the pan is dry and clean Ensure that there are no grains of dust on your ceramic hob or on the pan Sliding rough sa
Download Pdf Manuals
Related Search