British Telecom 77497 babyphone
Contents
1. BTG User Guide BT Digital Baby Monitor 300 2250 Baby Monitor 300 UG Iss2 2 indd 1 10 04 2014 11 06 NNK BEE 2250 Baby Monitor 300 UG Iss2 2 indd 2 Welcome to your BT Digital Baby Monitor 300 Digital sound quality with high definition sound Hi ds lets you hear your baby breathe gurgle snuffle or cry with complete clarity Wireless range of up to 300m outdoors and up to 50m indoors in ideal conditions where there is a clear line of sight between the units giving you the freedom to move around with clear reception and no interference from other baby monitors Out of range and battery low warnings Link light provides continuous confidence that the Parent unit is receiving a signal from the Baby unit and will alert you if the link is lost Talk back feature lets you instantly reassure and calm your baby Nightlight on Baby unit Crying alert on Parent unit 10 04 2014 11 06 This User Guide provides you with all Got everything information you need to get the most from your BT Digital Baby Monitor 300 Parentunit e 2xAA 1300mAh Please read this guide carefully and rechargeable patteries for Parent unit pre installed keep it for future reference Mey owe opie item code 077861 Need help If you have any problems setting up or using your BT Digital Baby Monitor 300 or would like any additional or r2. 13 200 21 Adjust the Parent unit Product disposal instructions 22 pe 23 AEP 14 feen 23 15 23 Switch Baby unit nightlight on off 15 If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 5 S 10 04 2014 11 06 Parent unit Lanyard attach point You can loop a lanyard not supplied through here Vol Increase speaker volume Talk Press to talk to your baby Vol Decrease speaker volume Mute is switched on when Vol is pressed to the lowest level Microphone Mute LED Steady red indicates that Mute has been switched on Your BT Digital Baby Monitor 300 Battery LED status indicator top of unit Red flashing light indicates the batteries are low and need re charging Solid red indicates the Parent unit is charging Baby sound level LEDs Indicates the level of received sound The LEDs will light up progressively as the sound increases See page 13 for further information Link status indicator Steady green indicates that the Baby and Parent units are linked Flashes green if not linked for the first 30 seconds Flashes red if not linked for longer than 30 seconds Also flashes green when the Talk button is pressed on the Parent unit to initiate parental ta
3. With the volume muted if your baby starts to cry you will not be able to hear the cries but if the cries sound above a certain level i e if they reach 83dB which is the 1st red Baby sound level LED then the Parent unit will emit an audible beep The crying alert is a user alert as described on page 17 If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 14 D 10 04 2014 11 06 Using your BT Digital Baby Monitor 300 15 The Baby unit must be switched Nightlight on for the nightlight to work You can set a comforting nightlight on the but doesn t need ta bellinked to Baby unit There are three levels of brightness the Parent unit Switch Baby unit nightlight on off 1 To switch on press either the or button It will take 3 seconds to illuminate to the highest brightness level 2 To switch off either press and hold the button for 2 seconds or keep pressing the button until it reaches the level past the lowest brightness level It will take 3 seconds to completely switch off Adjust the nightlight brightness 1 Press the B button to increase the brightness brightness level 2 Press the button to decrease the brightness ics Talk back You can use the Parent unit Talk back feature as a a to a ack mode even one way intercom to comfort and reassure your er baby By
4. 2250 Baby Monitor 300 UG Iss2 2 indd 9 10 04 2014 11 06 10 Setting up Battery low warning Parent unit When the batteries are low approximately within 1 hour of running out the Parent unit will emit low battery alert and the low battery indicator on the unit will flash red To speed up the charging process turn the Parent unit off when charging if it s not being used You can still use your Parent unit to monitor your baby even when the batteries are low provided it remains plugged in and on charge WARNING Always use rechargeable batteries in the Parent unit Only use the recommended type 2 x AA 1300mAh batteries Using other types could permanently damage the unit Charge the batteries as instructed in this user guide The Parent unit can still be used when it is on charge Baby unit Plug the remaining power adapter cable into the socket marked on the back of the Baby unit and plug the other end into the mains power and switch on Switch on and link the Parent and Baby units Press and hold the button the Baby unit for 1 second The nightlight will briefly illuminate and then the green Link indicator will flash Press and hold the button on the Parent unit until all the LEDs on the unit briefly illuminate The green Link indicator will flash Once the units are linked the green Link indicators on the Parent and Baby units will stop fl
5. Communications on 0800 980 8999 or a local qualified repairer If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 21 10 04 2014 11 06 2250 Baby Monitor 300 UG Iss2 2 indd 22 General information Returning your product If the Helpline is unable to remedy your problem they will issue a Fault Reference Authorisation number and ask you to return the product to your original place of purchase Where possible pack the product in its original packaging Please remember to include all parts including the power supply adapters and the original batteries For guarantee purposes proof of purchase is required so please keep your receipt Product disposal instructions The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life The Waste of Electrical and Electronic Equipment WEEE Directive 3002 96 EC has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment treat any hazardous substances and avoid the increasing landfill Product disposal instructions for residential users When you have no further use for it please remove any batteries and dispose of them and the product as per your loca
6. ashing and remain a steady green The units are now ready to use If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 10 S 10 04 2014 11 06 Settingup 11 Important Removing the batteries If you ever need to remove the i batteries simply slide open the the units is broken at any time the Link indicators and use the ribbon to eject the Parent and Baby units will flash green as they try the batteries to search for each other After 30 seconds if the link Positioning your units The link confirmation between the two units is vital The Baby unit should ideally be within 1m 2m of your baby for best performance is still broken they will flash red and you will also hear an alert signal from the Parent unit If the link is broken If you place the Parent and e check that the mains power is plugged in and Baby units too close together you will hear a high pitched switched on at the Baby unit noise this is normal The units e check that both units are switched on are designed to be located at e check that the batteries are charged in the s ne j e g in separate rooms Parent unit e check that the Parent and Baby units are within range of each other in ideal conditions the range is up to 300 metres outdoors and 50m indoors If you experience any problems please call the Helplin
7. bove please try switching the Baby unit off at the power and removing the batteries for approximately 30 minutes Ensure the Parent unit is clean by wiping with a damp cloth If the problem persists call the Helpline for advice Link indicator does not come on Check that both the Baby and Parent units are switched on Check that the batteries in the Parent unit are correctly installed and that they are charged Check that the units are within range of each other Check that the mains power is plugged in and switched on at the Baby unit Link light is flashing green If you have pressed to use the Talk Back feature the Link light will flash to indicate one way communication between the units The units are searching for a communication link If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 19 10 04 2014 11 06 20 Check units are within range of To speed up the charging process one another turn the Parent unit off when e Check both units are turned on charging if it is not being used Link indicator is flashing red Parent unit remains silent or e The Link between your units is very quiet broken You will also hear an alert You may have set the volume on the Parent unit to let you know too low see page 14 to increase there is no communication between the volume the u
8. e on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 11 S 10 04 2014 11 06 Using your BT Digital Baby Monitor 300 Switching on off Switch the Baby unit on 1 Press and hold the button for 1 second The nightlight will briefly illuminate and then the green LED will flash until it links with the Parent unit Once linked the green LED will remain on Switch the Parent unit on 1 Press and hold the button on the Parent unit until all the LEDs on the top of the unit briefly illuminate The green Link indicator will flash Once the units are linked the green Link indicators on the Parent and Baby units will stop flashing and remain a steady green The units are now ready to use Switch the Baby unit off 1 Press and hold the button on the Baby unit The green Link indicator will switch off Switch the Parent unit off 1 Press and hold the button on the Parent unit until an audible alert sounds The green Link indicator will switch off If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 12 D 10 04 2014 11 06 Using your Digital Baby Monitor 300 13 Baby sound level LED indicators LEDs 1 4 Green LEDs 5 7 Red IK 0 OD Link er The seven LEDs across the top of the Parent unit light up to indicate
9. eplacement batteries call our free BT Digital Baby Monitor Helpline on 0800 145 6789 Our dedicated advisors are more likely to be able to help you than the retailer where you made your purchase Alternatively you may find the answer in the Help section at the back of this guide Additional answers to Frequently Asked Questions are also available from bt com producthelp Calls made from within the UK mainland network are free Mobile and international call costs may vary 2250 Baby Monit UG Iss2 2 indd 3 10 04 2014 11 06 Important safety information e Your BT Digital Baby Monitor 300 is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision e Make sure the Baby unit Parent unit and mains adapter cables are kept out of reach of your baby at least one metre away e Never place the Baby unit inside your baby s cot bed or playpen e Never cover your Parent or Baby units e g with clothes towels or blankets e Never use or place your Parent or Baby units in moist places or near water e If travelling abroad make sure that the voltage shown on the mains power adapter corresponds to the local mains power before connecting to the power supply e There is a risk of explosion if the batteries are replaced by an incorrect type e Always dispose of batteries in accordance with applicable waste disposal regulations never in your househ
10. l authority s recycling processes For more information please contact your local authority or the retailer where the product was purchased Product disposal instructions for business users Business users should contact their suppliers and check the terms and conditions of the purchase contract and ensure that this product is not mixed with other commercial waste for disposal If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 10 04 2014 11 06 General information 23 R amp TTE This product is intended for use within the UK This equipment complies with the essential requirements for the Radio Equipment and Telecommunications Terminal Equipment Directive 1999 5 EC Declaration of Conformance Hereby BT declares that this BT Digital Baby Monitor 300 is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The Declaration of Conformance for the BT Digital Baby Monitor 300 is available from bt com producthelp User Guide formats This document is also available in other formats such as Large print Braille and Audio If you would like copy please call 0800 145 6789 If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 23 S 10 04 2014 11 06 For a Better Future We re always l
11. lk back Power on off Press and hold to switch the power on or off If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 6 10 04 2014 11 06 Your Digital Baby Monitor 300 7 Baby unit Nightlight Press to switch the nightlight on or off Power on off Press and hold Press and hold to 2 seconds to switch off switch the power a on or off Find Win IN Microphone Press to emit an alert beep from the Parent unit useful for finding the Parent unit if you ve misplaced it Link indicator Steady green indicates that the Baby and Parent units are linked Flashes green if not linked for the first 30 seconds Flashes red if not linked for longer than Nightlight illuminates 30 seconds around the base Also flashes green when the Talk button is pressed on the Parent unit to initiate parental talk back If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 7 S 10 04 2014 11 06 8 Your BT Digital Baby Monitor 300 Back of the Baby unit Power socket For connection to the mains power socket via the power adapter cable supplied If you experience any problems please call the Helpline on Freephone 0800 145 6789 or
12. manship of materials Products over 28 days old from the date of purchase may be replaced with a refurbished or repaired product The conditions of this guarantee are e The guarantee shall only apply to defects that occur within the 12 month guarantee period Proof of purchase is required e The equipment is returned to BT or its agent as instructed This guarantee does not cover the batteries and any faults or defects caused by accidents misuse fair wear and tear neglect tampering with the equipment or any attempt at adjustment or repair other than through approved agents This guarantee does not affect your statutory rights Within the 12 month guarantee period Prior to returning your product please read the Help section beginning on page 19 or contact the BT Digital Baby Monitor Helpline on 0800 145 6789 for assistance Additional answers to Frequently Asked Questions are available from bt com producthelp In the unlikely event of a defect occurring the Helpdesk will issue a Fault Reference Authorisation FRA number and instructions for replacement or repair Please note you will need the FRA number before returning the product This does not affect your statutory rights Outside of the 12 month guarantee period If your product needs repair after the guarantee period has ended or if you require technical assistance outside of the 12 month guarantee period please call BT s approved repair agent Discount
13. nits If this happens check that the mains power or batteries You can hear a high pitched noise is correctly connected and that e The units might be too close to the units are within range of one each other another See page 10 for instructions The volume setting might be too on linking the units high see page 14 Battery low on Parent unit Talk back feature is not working e Put the Parent unit back on charge e Check that the units are linked e Place the Parent unit back on charge as frequently as possible or ideally leave it on charge to ensure the batteries remain charged To fully charge the batteries the Parent unit should be on charge for approximately 24 hours if switched on or 16 hours if switched off to reach maximum charge If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 20 D 10 04 2014 11 06 General information Cleaning Both units have splash resistant grilles and casing To clean wipe with a damp cloth Guarantee Your BT Digital Baby Monitor 300 is guaranteed for a period of 12 months from the date of purchase Subject to the terms listed below the guarantee will provide for the repair of or at BT s or its agent s discretion the option to replace the BT Digital Baby Monitor 300 or any component thereof which is identified as faulty or below standard or as a result of inferior work
14. oduct It is a useful unit back to its default settings feature that ensures your Baby Monitor is returned to its new Reset the Parent unit out of the box settings rer 1 Within 3 seconds of the Parent unit being switched on press and hold the button for at least 10 seconds You will hear a confirmation beep once the reset has been performed Reset the Baby unit 1 Within 3 seconds of the Baby unit being switched on press the button for at least 10 seconds You will hear a confirmation beep once the reset has been performed If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 18 D 10 04 2014 11 06 Helpline If you have any problems using your BT Digital Baby Monitor 300 call 0800 145 6789 Parent unit is beeping Please see page 17 for the list of tones the Parent unit makes The Parent unit will beep for a number of reasons The link has been lost between your units see page 11 Check that the Baby unit Link indicator is illuminated If not please ensure that the power adapter is still connected and if this still does not switch on please test into a different electrical socket The crying alert is switched on see page 14 e The batteries are low see pages 9 10 e The Find button has been pressed on the Baby unit see page 16 If the Parent unit still beeps after checking the a
15. old rubbish see page 22 During continual use the Baby unit and Parent unit power adapters may become warm to the touch This is normal and is not something to be concerned about e Inthe event of a power failure when the power is restored all your settings will remain unchanged If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 4 D 10 04 2014 11 06 In this guide Important safety information 4 Adjust the nightlight brightness 15 Your BT Digital Baby Monitor 300 6 Talk 15 6 Parent unit battery LED indicator 16 Baby 16 Back of the Baby B Listof tones 17 SENG 9 18 Using your BT Digital Baby Monitor 300 Reset the Parent 18 Switch the Baby unit 12 Reset the 18 Switch the Parent unit 12 OMB 19 Switch the Baby unit 12 21 Switch the Parent unit 12 Ceigean 21 Baby sound level LED indicators
16. ooking to make our products last longer and use less power so we don t have such a big impact on the environment To find out about what we are doing visit bt com betterfuture Offices worldwide The services described in this publication are subject to availability and may be modified from time to time Services and equipment are provided subject to British Telecommunications plc s respective standard conditions of contract Nothing in this publication forms any part of any contract British Telecommunications plc 2014 Registered Office 81 Newgate Street London EC1A 7AJ Registered in England No 1800000 Printed in China Designed and produced by The Art amp Design Partnership Ltd BT Digital Baby Monitor 300 04 14 Issue 2 BT f C109831 2250 Baby Monitor 300 UG Iss2 2 indd 24 D 10 04 2014 11 06
17. s on the Baby unit The paging alert will sound at the Parent unit 2 To stop the alert press any button on the Parent unit or press the button again on the Baby unit If no button is pressed after 2 minutes then the alert will automatically stop If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 16 D 10 04 2014 11 06 Using your BT Digital Baby Monitor 300 17 List of tones Your Baby Monitor unit can produce various tones They have the following meaning Meaning Single tone Confirmation tone e g setting saved Double tone Error tone e g max volume reached fast when adjusting volume Double tone User alert e g crying alert paging alert slow etc Triple tone fast System alert e g link lost battery low etc User Alert tones can be silenced by pressing any button on the Parent unit System Alerts can be silenced for a 5 minute period by pressing any button on the Parent unit If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 17 S 10 04 2014 11 06 18 Using your BT Digital Baby Monitor 300 Resetting the units is A only advisable if you are Reset the un its experiencing difficulties with Resetting either units will return the settings at that your pr
18. speaking into the Parent unit your baby activated at the Baby unit will hear your voice from the Baby unit e g Nightlight on Please note that when using Talk back you will not be able to hear your baby until you release the button If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 15 S 10 04 2014 11 06 16 Using your BT Digital Baby Monitor 300 Do not press the button 1 Press and hold down the button on the Parent oe unite speak baby ih same room Hiah plech Whilst the button is depressed the green Link noise will be generated if the indicators will flash on both units button is pressed when the a Baby unit and Parent unit are Parent unit battery LED indicator top of unit close to each other or within When the Parent unit is on charge the battery LED 3 metres distance will be solid red When the power is removed the When using Talk back hold i LED will switch off When the battery is low the LED the Parent unit approximately 30cm in front of your mouth will flash when talking to baby Find You can press the button on the Baby unit to make the Parent unit sound an alert beep to help you find it if it s been misplaced If the Parent unit loudspeaker volume had been muted or set to volume off the volume level will be reset to the default setting of Level 3 1 Pres
19. the level of sound being received from the Baby unit The LEDs light up progressively as the sound increases LEDs 1 2 light up Green when sounds of 57dB and Equivalent sound 63dB are received level examples 60dB 70dB LEDs 3 4 light up Green when sounds of 69dB and normal conversation 75dB are received 75dB loud conversation 83 95dB loud traffic noise LEDs 5 7 light up Red when sounds of 83dB 89dB or 95dB are received If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 13 S 10 04 2014 11 06 14 Using your BT Digital Baby Monitor 300 If you try and set the volume higher lower than the 5 Adjust the Parent unit settings available on either loudspeaker volume unit you will hear a double k There are 5 volume levels and off Mute alert tone The default loud k is L 13 e default loudspeaker volume is Level 3 If the or buttons are pressed while Mute has been 1 Press or to select the required level You will set then Mute will be switched h di ear a difference in volume as you keep pressin off and the loudspeaker y g volume will return to Level 3 the button s automatically If you wish to switch the volume off keep pressing until the Mute LED turns red Crying alert The crying alert will only be activated if the Parent unit loudspeaker volume has been switched off
20. visit bt com producthelp 2250 Baby Monitor 300 UG Iss2 2 indd 8 D 10 04 2014 11 06 Parent unit 1 Plug one of the power adapter cables into the socket marked on the side of the Parent unit and plug the other end into the mains power wall socket and switch the power on 2 Activate the batteries by pulling the plastic tab away from the top of the Parent unit and leave to charge for 24 hours to reach maximum charge PULL Rechargeable batteries already fitted Remove this tab and charge batteries for 24 hours before use WARNING Only use the power adapters supplied Using incorrect power adapters may permanently damage your product Battery performance Rechargeable batteries in the Parent unit will last approximately 16 hours during normal operation or 20 hours when Mute is switched on Please note that new batteries do not reach full capacity until they have been in normal use for several days The charge capacity of rechargeable batteries will reduce with time as they wear out so reducing the performance time of the Parent unit Eventually they will need to be replaced New batteries can be obtained from the BT Digital Baby Monitor 300 Helpline on 0800 145 6789 The Parent unit rechargeable batteries will lose charge over a period of time even if switched off If you experience any problems please call the Helpline on Freephone 0800 145 6789 or visit bt com producthelp
Download Pdf Manuals
Related Search