AEG F66602VI0P dishwasher
Contents
1. 5 PROGRAMMES ENGLISH 7 Programme Degree of soil Programme phases Options Type of load Bi e Normal soil e Prewash e ExtraHygiene ECO e Crockery and e Wash 50 C e TimeSaver cutlery e Rinses e Multitab e Dry P2 e All e Prewash e ExtraHygiene Be 2 e Crockery cut Wash from 45 C to 70 e Multitab lery pots and ACT pans Rinses e Dry P3 e Heavy soil e Prewash e TimeSaver PRO 3 e Crockery cut e Wash 70 C e Multitab lery pots and e Rinses pans e Dry P4 e Normal or light e Wash 45 C e Multitab y soil Rinses e Delicate crock Dry ery and glass ware PS e Fresh soil e Wash 60 C e ExtraHygiene ans 4 e Crockery and e Rinses e Multitab cutlery P6 e Normal soil e Prewash e Multitab SD e Crockery and e Wash SC cutlery e Rinses e Dry 1 With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil This is the standard programme for test institutes 2 The appliance senses the degree of soil and the quantity of items in the baskets It automatically ad justs the temperature and the quantity of water the energy consumption and the programme duration 3 This programme has a high temperature rinsing phase for better hygiene results During the rinsing phase the temperature stays at 70 C for at least 10 minutes 4 With this programme you can wash a load with fresh soil It gives good washing results in a short time 5 This is the m2. Do not put in the appliance items that can absorb water sponges household cloths Remove remaining food from the items Make soft the remaining burned food on the items Put hollow items cups glasses and pans with the opening down Make sure that cutlery and dishes do not bond together Mix spoons with other cutlery Make sure that glasses do not touch other glasses Put small items in the cutlery basket Put light items in the upper basket Make sure that the items do not move 11 CARE AND CLEANING A i WARNING Before maintenance deactivate the appliance and disconnect the mains plug from the main socket Dirty filters and clogged spay arms decrease the washing results Make a check regularly and if necessary clean them 11 1 Cleaning the filters The filter system is made of 3 parts ENGLISH 15 Make sure that the spray arm can move freely before you start a programme 10 5 Before starting a programme Make sure that The filters are clean and correctly installed The cap of the salt container is tight The spray arms are not clogged There is dishwasher salt and rinse aid unless you use multi tablets The position of the items in the baskets is correct The programme is applicable for the type of load and for the degree of soil The correct quantity of detergent is used 10 6 Unloading the baskets 1 i Let the tableware cool down before you remove it
3. no rinse aid is released 3 Press ut again and again to change the setting 4 Press the on off button to confirm the setting 6 4 Use of rinse aid and multi tablets When you activate the option Multitab the rinse aid dispenser continues to release rinse aid However you can deactivate the rinse aid dispenser In this case the drying results may not be satisfactory With the rinse aid dispenser deactivated the rinse aid indicator is always off How to deactivate the rinse aid dispenser The appliance must be in programme selection mode 1 To enter the user mode press and hold simultaneously V and GS until the indicators V Ct and B start to flash and the display is blank 2 Press V e The indicators tt and D go off e The indicator V continues to flash e The display shows the current setting i d rinse aid dispenser activated 3 Press V to change the setting Od rinse aid dispenser deactivated The rinse aid indicator goes off 4 Press the on off button to confirm the setting 6 5 Acoustic signals Acoustic signals sound when a malfunction of the appliance occurs It is not possible to deactivate these acoustic signals There is also an acoustic signal that sounds when the programme is completed By default this acoustic signal is deactivated but it is possible to activate it How to activate the acoustic signal for the end of programme The appliance must be in
4. dH In areas exceeding this limit rinse aid and salt must be used in addition to the multi tablets However in areas with hard and very hard water we recommend to use solo detergent powder gel tablets without additional functions rinse aid and salt separately for optimal cleaning and drying results e If you use multi tablets you can select the Multitab option if available This option increases the cleaning and drying results with the use of multi tablets e Detergent tablets do not fully dissolve with short programmes To prevent detergent residues on the tableware we recommend that you use the tablets with long programmes e Do not use more than the correct quantity of detergent Refer to the instructions on the detergent packaging 10 3 What to do if you want to stop using multi tablets Before you start to use separately detergent salt and rinse aid do the following procedure 1 Set the highest level of the water softener 2 Make sure that the salt and rinse aid containers are full Start the shortest programme with a rinsing phase Do not add detergent and do not load the baskets When the programme is completed adjust the water softener according to the water hardness in your area Adjust the released quantity of rinse aid 10 4 Loading the baskets Only use the appliance to wash items that are dishwasher safe Do not put in the appliance items made of wood horn aluminium pewter and copper
5. 7 5 12 1 Factory setting 2 Do not use salt at this level How to set the water softener level The appliance must be in programme selection mode 1 To enter the user mode press and hold simultaneously V and GS until RR ry the indicators V ct and SS start to flash and the display is blank 2 Press e The indicators V Ct and amp go off e The indicator continues to flash e The display shows the current setting e g 5 I level 5 3 Press again and again to change the setting 4 Press the on off button to confirm the setting 6 3 The rinse aid dispenser The rinse aid helps to dry the dishes without streaks and stains The rinse aid is automatically released during the hot rinse phase You can set the released quantity of rinse aid between level 1 minimum quantity and level 6 maximum quantity Level 0 will deactivate the rinse aid dispenser and no rinse aid will be released Factory setting level 4 How to set the rinse aid level The appliance must be in programme selection mode 1 To enter the user mode press and hold simultaneously V and GS until stil DI the indicators amp V Cr and D start to flash and the display is blank 2 Press Gi www aeg com e The indicators V ana D go off e The indicator Ct continues to flash e The display shows the current setting e g YAT level 4 The levels of rinse aid are from OA to 6A Level 0
6. appliance can take up to 5 minutes to recharge the resin in the water softener It seems that the appliance is not working The washing phase starts only after this procedure is completed The procedure will be repeated periodically 8 1 The salt container CAUTION Only use salt specifically designed for dishwashers The salt is used to recharge the resin in the water softener and to assure good washing results in the daily use How to fill the salt container 1 Turn the cap of the salt container counterclockwise and remove it 2 Put 1 litre of water in the salt container Only for the first time 3 Fill the salt container with dishwasher salt aA A 4 Remove the salt around the opening of the salt container 9 DAILY USE 1 Open the water tap 2 Press the on off button to activate the appliance Make sure that the appliance is in user mode 5 Turn the cap of the salt container clockwise to close the salt container i Water and salt can come out from the salt container when you fill it Risk of corrosion To prevent it after you fill the salt container start a programme 8 2 How to fill the rinse aid dispenser CAUTION Only use rinse aid specifically designed for dishwashers 1 Open the lid C 2 Fill the dispenser B until the rinse aid reaches the marking MAX 3 Remove the spilled rinse aid with an absorbent cloth to prevent too
7. much foam 4 Close the lid Make sure that the lid locks into position i Fill the rinse aid dispenser when the indicator A becomes clear e f the salt indicator is on fill the salt container e lf the rinse aid indicator is on fill the rinse aid dispenser 3 Load the baskets 4 Addthe detergent If you use multi tablets activate the option Multitab 5 Set and start the correct programme for the type of load and the degree of soil 9 1 Using the detergent A B CAUTION Only use detergent specifically designed for dishwashers 4 1 Press the release button A to open the lid C 2 Putthe detergent in powder or tablets in the compartment B 3 If the programme has a prewash phase put a small quantity of detergent on the inner part of the appliance door 4 Close the lid Make sure that the lid locks into position 9 2 Setting and starting a programme The Auto Off function This function decreases energy consumption by deactivating automatically the appliance when it is not operating The function comes into operation e 5 minutes after the completion of the programme e After 5 minutes if the programme has not started ENGLISH 13 Starting a programme 1 Keep the appliance door ajar 2 Press the on off button to activate the appliance Make sure that the appliance is in programme selection mode 3 Press repeatedly V until the display shows the numb
8. programme selection mode 1 To enter the user mode press and hold simultaneously V and GS until on ry the indicators V ct and N start to flash and the display is blank 2 Press amp e The indicators V and go off e The indicator Q continues to flash e The display shows the current setting O b Acoustic signal off 3 Press Sto change the setting N HANS Ib Acoustic signal on 4 Press the on off button to confirm the setting 7 OPTIONS i Desired options must be activated every time before you start a programme It is not possible to activate or deactivate options while a programme is running i Not all options are compatible with each other If you have selected non compatible options the appliance will automatically deactivate one or more of them Only the indicators of the options still active will stay on 7 1 Multitab Activate this option when you use multi tablets that integrate the salt rinse aid and detergent functions They can also contain other cleaning or rinsing agents This option deactivates the release of salt The salt indicator does not come on With the use of this option the programme duration is prolonged to increase the cleaning and drying results with the use of multi tablets Multitab is not a permanent option and must be selected at every cycle How to activate Multitab Press The related indicator comes on 7 2 TimeSaver This op
9. EN User Manual FAVORIT 66602VI0P 0 Dishwasher HAEG perfekt in form und funktion 2 www aeg com CONTENTS Li SAFETY INFORMATION nee an 3 2 SAFETY INSTRUCHIONS u een 4 SP RODUCTIDE SCRIP TIO IN ee ee een nee 5 4 CONTROLPANE Liss een ana lemme nina 6 Se PROGRAMMES s 2 0 1 222 2 a ERBE ui 7 Gs SETTINGS nn ea Reel 8 PPO UNO N Sr RR ea 11 8 BEFORE FIRST USE siirsi eoit eiiie naeh 11 9 BAILY USE An a A are 12 TO FINTS AND TIPS isinsin ni ntaa En en nun 14 I CARE AND CLEANING surece ee een een 15 12 TROUBLESHOOTING 40a een en 17 13 TECHNICAL INFORMATION san ea ek 18 FOR PERFECT RESULTS Thank you for choosing this AEG product We have created it to give you impeccable performance for many years with innovative technologies that help make life simpler features you might not find on ordinary appliances Please spend a few minutes reading to get the very best from it Visit our website for Get usage advice brochures trouble shooter service information www aeg com g Register your product for better service www registeraeg com Buy Accessories Consumables and Original spare parts for your appliance www aeg com shop CUSTOMER CARE AND SERVICE Always use original spare parts When contacting our Authorised Service Centre ensure that you have the following data available Model PNC Serial Number The information can be found on the rating plate A Wa
10. IPS 10 1 General The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment e Remove larger residues of food from the dishes into the waste bin e Do not pre rinse dishes by hand When needed use the prewash programme if available or select a programme with a prewash phase e Always use the whole space of the baskets e When loading the appliance make sure that the dishes can be completely reached and washed by the water released from the spray arm nozzles Make sure that items do not touch or cover each other e You can use dishwasher detergent rinse aid and salt separately or you can use the multi tablets e g 3in1 4in1 All in 1 Follow the instructions written on the packaging e Select the programme according to the type of load and degree of soil With the ECO programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil 10 2 Using salt rinse aid and detergent e Only use salt rinse aid and detergent for dishwasher Other products can cause damage to the appliance Make sure that there is detergent in the detergent dispenser before you start a new programme End of programme When the programme is completed and you open the door the appliance is automatically deactivated Close the water tap e Multi tablets are usually suitable in areas with a water hardness up to 21
11. an leave programmes at least 2 times per deposits of grease and limescale month inside the appliance To prevent this 12 TROUBLESHOOTING If the appliance does not start or it stops With some problems the display during operation Before you contact an shows an alarm code Authorised Service Centre check if you can solve the problem by yourself with the help of the information in the table Problem and alarm code Possible solution You cannot activate the ap Make sure that the mains plug is connected to the pliance mains socket e Make sure that there is no a damage fuse in the fuse box The programme does not e Make sure that the appliance door is closed start e Ifthe delay start is set cancel the setting or wait for the end of the countdown e The appliance has started the procedure to recharge the resin inside the water softener The duration of the procedure is approximately 5 minutes The appliance does not fill e Make sure that the water tap is open with water e Make sure that the pressure of the water supply is not j Nie 2 The display shows Gt too low For this information contact your local water authority e Make sure that the water tap is not clogged e Make sure that the filter in the inlet hose is not clogged e Make sure that the inlet hose has no kinks or bends The appliance does not e Make sure that the sink spigot is not clogged drain the water e Make sure that the drain h
12. ce has a 13 amp mains plug If 2 2 Electrical connection it is necessary to change the fuse in i the mains plug use a 13 amp ASTA WARNING BS 1362 fuse Risk of fire and electrical shock 2 3 Water connection The appliance must be earthed e Make sure not to cause damage to Make sure that the electrical the water hoses information on the rating plate agrees e Before you connect the appliance to with the power supply If not contact new pipes or pipes not used for a an electrician long time let the water flow until it is Always use a correctly installed clean shockproof socket e The first time you use the appliance Do not use multi plug adapters and make sure that there is no leakage extension cables e The water inlet hose has a safety valve Make sure not to cause damage to and a sheath with an inner mains the mains plug and to the mains cable cable Should the mains cable need ENGLISH 5 e Do not drink and play with the water in the appliance e Do not remove the dishes from the appliance until the programme is completed There can be detergent on the dishes e The appliance can release hot steam if you open the door while a programme operates e Do not put flammable products or items that are wet with flammable WARNING products in near or on the appliance Dangerous voltage e If the water inlet hose is damaged 2 5 Disposal immediately disconnect the mains WARNING plug from the mains socket Contact the A
13. ce is to be connected to the water mains using the new supplied hose sets Old hose sets must not be reused 4 www aeg com 1 2 Children and vulnerable people safety This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Do not let children play with the appliance Keep all detergents away from children Keep children and pets away from the appliance door when it is open Cleaning and user maintenance shall not be made by children without supervision 2 SAFETY INSTRUCTIONS 2 1 Installation to be replaced this must be carried out by our Authorised Service Centre Remove all the packaging e Connect the mains plug to the mains Do not install or use a damaged socket only at the end of the appliance installation Make sure that there is Do not install or use the appliance access to the mains plug after the where the temperature is less than O installation G o e Do not pull the mains cable to Obey the installation instruction disconnect the appliance Always pull supplied with the appliance the mains plug Make sure that the appliance is e This appliance complies with the installed below and adjacent to safe E E C Directives structures e Only for UK and Ireland The z applian
14. er of the programme you want to start The display will show the programme number for approximately 3 seconds and then show the programme duration The display will show the programme number for approximately 3 seconds and then show the programme duration 4 Set the applicable options 5 Close the appliance door to start the programme Starting a programme with delay start 1 Seta programme 2 Press again and again until the display shows the delay time you want to set from 1 to 24 hours The delay indicator comes on 3 Close the appliance door to start the countdown While a countdown is running it is possible to increase the delay time but not to change the selection of the programme and options When the countdown is completed the programme starts Opening the door while the appliance operates If you open the door while a programme is running the appliance stops When you close the door the appliance continues from the point of interruption i If the door is opened for more than 30 seconds during the drying phase the running programme will end www aeg com Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the programme and options again Press and hold RESET until the appliance is in programme selection mode Cancelling the programme Press and hold RESET until the appliance is in programme selection mode 10 HINTS AND T
15. from the appliance Hot items can be easily damaged First remove items from the lower basket then from the upper basket At the end of the programme water can still remain on the sides and on the door of the appliance Turn the filter B counterclockwise and remove it 16 www aeg com 2 Remove the filter C out of filter B 3 Remove the flat filter A 5 Make sure that there are no residues of food or soil in or around the edge ofthe sump 6 Put back in place the flat filter A Make sure that it is correctly positioned under the 2 guides 7 Reassemble the filters B and C 8 Put back the filter B in the flat filter A Turn it clockwise until it locks CAUTION An incorrect position of the filters can cause bad washing results and damage to the appliance 11 2 Cleaning the spray arms Do not remove the spray arms If the holes in the spray arms are clogged remove remaining parts of soil with a thin pointed object 11 3 External cleaning e Clean the appliance with a moist soft cloth e Only use neutral detergents e Do not use abrasive products abrasive cleaning pads or solvents 11 4 Internal cleaning e Carefully clean the appliance including the rubber gasket of the door with a soft moist cloth ENGLISH 17 e If you regularly use short duration we recommend to run long duration programmes these c
16. ical connection 1 Voltage V 220 240 Frequency Hz 50 Water supply pressure Min max bar MPa 0 5 0 05 8 0 8 Water supply Cold water or hot water 2 max 60 C Capacity Place settings 13 Power consumption Left on mode W 0 99 Power consumption Off mode W 0 10 1 Refer to the rating plate for other values 2 fthe hot water comes from alternative source of energy e g solar panels aeolian energy use the hot water supply to decrease energy consumption 14 ENVIRONMENTAL CONCERNS household waste Return the product to your local recycling facility or contact your municipal office Recycle the materials with the symbol G Put the packaging in applicable containers to recycle it Help protect the environment and human health and to recycle waste of electrical and electronic appliances Do not dispose appliances marked with the symbol amp with the ENGLISH 19 www aeg com shop fel Mal 117898310_A_132014 A mn HAEG perfekt in form und funktion
17. n the product number PNC that is on the rating plate How to set the programme selection mode The appliance is in programme selection mode when the display shows the programme number P1 When you activate the appliance usually it is in programme selection mode However if this does not happen you can set the programme selection mode in the following way Press and hold RESET until the appliance is in programme selection mode 6 2 The water softener The water softener removes minerals from the water supply which would have a detrimental effect on the washing results and on the appliance The higher the content of these minerals the harder your water is Water hardness is measured in equivalent scales The water softener should be adjusted according to the hardness of the water in your area Your local water authority can advise you on the hardness of the water Water hardness ENGLISH 9 in your area It is important to set the right level of the water softener to assure good washing results German de French degrees mmol l Clarke de Water softener lev grees dH fH grees el 47 50 84 90 8 4 9 0 58 63 10 43 46 76 83 7 6 8 3 53 57 9 37 42 65 75 6 5 7 5 46 52 8 29 36 51 64 5 1 6 4 36 45 7 23 28 40 50 4 0 5 0 28 35 6 19 22 33 39 3 3 3 9 23 27 Er 15 18 26 32 2 6 3 2 18 22 11 14 19 25 1 9 2 5 13 17 8 4 10 7 18 0 7 1 8 5 12 2 lt 4 lt 7 lt 0
18. ose has no kinks or bends The display shows Cll The anti flood device ison e Close the water tap and contact an Authorised Service The display shows itl Su Once you have checked the appliance For alarm codes not described in the deactivate and activate the appliance If table contact an Authorised Service the problem occurs again contact an Centre Authorised Service Centre 18 _www aeg com 12 1 The washing and drying results are not satisfactory Problem Possible solution There are whitish streaks or e The release quantity of rinse aid is too much Adjust bluish layers on glasses and the rinse aid selector to a lower position dishes e The quantity of detergent is too much There are stains and dry water The released quantity of rinse aid is not sufficient Ad drops on glasses and dishes just the rinse aid selector to a higher position e The quality of the rinse aid can be the cause The dishes are wet e The programme does not have a drying phase or has a drying phase with low temperature e The rinse aid dispenser is empty e The quality of the rinse aid can be the cause e The quality of the multi tablets can be the cause Try a different brand or activate the rinse aid dispenser and use rinse aid and multi tablets together i Refer to Hints and tips for other possible causes 13 TECHNICAL INFORMATION Dimensions Width height depth mm 596 818 898 550 Electr
19. ost silent programme The pump works at a very low speed to decrease the level of noise Because of the low speed the programme duration is long 5 1 Consumption values Programme 1 P1 ECO Water I 10 2 Energy kWh 0 932 Duration min 225 www aeg com Programme 1 F2 7 14 AUTO SENSE Be 12 5 14 5 PRO P4 12 14 x RS 10 Quick 30MIN P6 9 10 Extra SILENT Energy Duration kWh min 0 6 1 4 40 150 1 4 1 6 154 164 0 7 0 9 75 85 0 9 30 1 0 1 2 219 229 1 The pressure and the temperature of the water the variations of the mains supply the options and the quantity of dishes can change the values 5 2 Information for test institutes For all the necessary information for test performance send an email to 6 SETTINGS 6 1 Programme selection mode and user mode When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode In user mode the following settings can be changed e The level of the water softener according to the water hardness e The activation or the deactivation of the acoustic signal for end of programme e The deactivation of the rinse aid dispenser when you want to use the Multitab option without rinse aid e The level of rinse aid according to the required dosage These settings will be saved until you change them again info test dishwasher production com Write dow
20. rning Caution Safety information i General information and tips Environmental information Subject to change without notice ENGLISH 3 1 A SAFETY INFORMATION Before the installation and use of the appliance carefully read the supplied instructions The manufacturer is not responsible if an incorrect installation and use causes injuries and damages Always keep the instructions with the appliance for future reference 1 1 General Safety This appliance is intended to be used in household and similar applications such as farm houses staff kitchen areas in shops offices and other working environments by clients in hotels motels bed amp breakfast and other residential type environments Do not change the specification of this appliance The operating water pressure minimum and maximum must be between 0 5 0 05 8 0 8 bar Mpa Obey the maximum number of 13 place settings If the supply cord is damaged it must be replaced by the manufacturer its Authorised Service Centre or similarly qualified persons in order to avoid a hazard Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position Do not keep the appliance door open without supervision to prevent to fall on it Before maintenance deactivate the appliance and disconnect the mains plug from the mains socket Do not use water spray and steam to clean the appliance The applian
21. tion increases the pressure and the temperature of the water The 8 BEFORE FIRST USE 1 Make sure that the current level of the water softener agrees with the hardness of the water supply If not adjust the level of the water softener 2 Fill the salt container 3 Fill the rinse aid dispenser ENGLISH 11 washing and the drying phases are shorter The total programme duration decreases by approximately 50 The washing results are the same as with the normal programme duration The drying results can decrease How to activate TimeSaver Press Q the related indicator comes on If the option is not applicable to the programme the related indicator does not come on or it flashes quickly for a few seconds and then goes off The display shows the updated programme duration 7 3 ExtraHygiene With this option you have better hygiene results During the last rinsing phase the temperature stays at 70 C for at least 10 minutes How to activate ExtraHygiene Press D the related indicator comes on If the option is not applicable to the programme the related indicator does not come on or it flashes quickly for a few seconds and then goes off The display shows the updated programme duration 4 Open the water tap 5 Start a programme to remove any processing residuals that can still be inside the appliance Do not use detergent and do not load the baskets www aeg com When you start a programme the
22. uthorised Service Centre to I A 4 Risk of injury or suffocation replace the water inlet hose e Disconnect the appliance from the mains supply 2 4 Use e Cut off the mains cable and discard it e Remove the door catch to prevent children and pets to get closed in the appliance e Do not sit or stand on the open door e Dishwasher detergents are dangerous Obey the safety instructions on the detergent packaging 3 PRODUCT DESCRIPTION Top spray arm Upper spray arm 6 www aeg com e When the programme starts a red Lower spray arm light comes on and stays on for all the Filters duration of the programme Rating plate e When ln is completed a green light comes on BE Salt container e When the appliance has a Air vent malfunction the red light flashes EJ Rinse aid dispenser The Beam on Floor goes off E Detergent dispenser TOn TARNE is Cutlery basket Lower basket Upper basket 3 1 Beam on Floor The Beam on Floor is a light that shows on the kitchen floor below the appliance door 4 CONTROL PANEL Auto Off On off button EI TimeSaver button Display Multitab button Delay button EJ RESET button Program button E Indicators ExtraHygiene button 4 1 Indicators Indicator Description End indicator g Salt indicator It is always off while the programme operates ii Rinse aid indicator It is always off while the programme operates
Download Pdf Manuals
Related Search