AcuRite 00638A2 weather station
Contents
1. LJ gt 2 IT Instruction Manual Weather Center model 00623 00632 00638 0 16 10 35 87 on PRESSURE 2381 CONTENTS Atomic 8 Unpacking Instructions 2 Set Time Date Units 8 Package Contents 2 Placement Guidelines 9 Product Registration 2 3 in 1 Sensor Installation 10 FCC Information 2 Using the Weather Center 11 Features amp Benefits 3 in 1 3 Troubleshooting 065 12 Features Display Unit 4 Care amp Maintenance 14 SEUD eater 6 14 3 in 1 Sensor Setup 6 Customer 15 Display Unit Setup 15 Questions Contact Customer Support at 877 221 1252 or visit www AcuRite com SAVE THIS MANUAL FOR FUTURE REFERENCE ACUDIeITE Congratulations on your new AcuRite product To ensure the best possible product performance please read this manual in its entirety and retain it for future reference Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product Locate the tab and peel off to remove Package Contents 1 Display unit with tabletop stand 2 1 sensor 3 Sensor mounting bracket 4 Mounting hardware 5 Instruction Manual I2. SET SCALE DISPLAY UNIT 1 Date 2 Low Battery Indicator 3 Atomic Clock Maintains time with split second accuracy and automatically updates for daylight saving time 4 Atomic Clock Signal Strength 5 Selected Time Zone 6 Barometric Pressure Arrow icon indicates the direction the pressure is trending 7 History Chart Icon Indicates data is currently displayed on the History Chart 22 8 Moon Phase 9 History Chart Icon Indicates data is currently displayed on the History Chart 22 10 Current Outdoor Temperature Arrow icon indicates direction temperature is trending 11 Sensor Signal Strength 12 Low Sensor Battery Indicator 13 Current Indoor Humidity 14 High Low Records Indicator Indicates whether minimum or maximum records are being shown 15 Current Indoor Temperature 16 Removable Tabletop Stand 17 MIN MAX Button Press to view high or low records for temperature and humidity 18 SCALE Button Changes data units to either U S units or imperial units 19 HISTORY MODE Button Press to toggle between pressure temperature and wind speed data on the History Chart 22 20 Button For setup preferences 21 SET Button For setup preferences 22 Multi Variable History Chart Displays the past 12 hours of data for pressure temperature or wind speed 23 Seasonal Displays heat index dew point or wind chill depending on the current ou
3. 30 ft high or more Make sure to compare data using a sensor positioned at the same mounting height Check location of the sensor Ensure it s mounted a minimum of 5 ft in the air with no obstructions around it within several feet Ensure wind cups are spinning freely If they hesitate or stop try lubricating with graphite powder or spray lubricant Check that the batteries are installed correctly Batteries may need to be replaced Reset the display by pressing the reset button located on the back of the display unit Date and time will need to be entered after a reset Weather Forecast icon predicts conditions for the next 12 to 24 hours not current conditions Has Learning Mode icon disappeared from the display unit Learning Mode must complete before forecast and pressure will be accurate Allow unit to run continuously for 33 days Battery removal or resetting the display unit will restart Learning Mode After 14 days forecast should be fairly accurate however Learning Mode calibrates for a total of 33 days Make sure both the display unit and 3 in 1 sensor are placed out of direct sunlight and away from any heat sources or vents see page 9 Make sure both units are positioned away from moisture sources see page 9 Make sure 3 in 1 sensor is mounted at least 5 ft off of the ground If your AcuRite product does not operate properly after trying the troubleshooting steps visit www AcuRite com or cal
4. MPORTANT warranty service PRODUCT REGISTRATION Register online SUPPORT to receive year warranty protection www AcuRite com i Register a Product FCC Information This device complies with part 15 of FCC rules Operation is subject to the following two conditions 1 This device may NOT cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation WARNING Changes or modifications to this unit not approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equip ment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However There is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or ARRA reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase th
5. ce please have the model number of this product available and contact us in any of the following ways O 877 221 1252 info chaney inst com 24 7 support at www AcuRite com gt Installation Videos gt Instruction Manuals gt Replacement Parts to receive year warranty protection www AcuRite com gt Register your Product gt Support User Forum gt Submit Feedback amp Ideas IMPORTANT PRODUCT REGISTRATION Register online PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE Limited One Year Warranty At AcuRite we proudly uphold our commitment to quality technology Chaney Instrument Co warrants that all products it manufactures to be of good material and workmanship and to be free of defects when properly installed and operated for a period of one year from the date of purchase We recommend that you visit us at www AcuRite com for the fastest way to register your product However product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits Chaney Instrument Co warrants that all products it manufactures to be of good material and workmanship and to be free of defects when properly installed and operated for a period of one year from the date of purchase Remedy for breach of this warranty is limited to repair or replacement of the defective item s Any product which under normal use and service is proven to breach the
6. e separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help NOTE The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user authority to operate the equipment This device complies with Industry Canada licence exempt RSS anda Operation is subject to the following two conditions 1 This device may not cause and 2 This device must accept any interference received including interference that may cause undesired operation of the device 2 Features amp Benefits POE 2 2 3 3 in 1 SENSOR 1 Temperature amp Humidity Sensors 6 Mounting Bracket internal 7 Switch not shown ID code that must match display s A B C switch to ensure units Mounting Point synchronize Release Lever for Battery Access Wind Speed Anemometer Se Mounting Hardware Includes anchors and screws Features amp Benefits Display Unit 30 31 29 28 27 26 25 24 23 22 e rs _ i A FUTURE FORECAST BAROMETRIC PRESSURE HISTORY HOURS AGO Ji Pa P RS BAROMETER 4 WINDSPEED
7. e to view installation photos and video or learn more about AcuRite technology www dAcuRite com 3in 1 View Video 3 in 1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at least 5 feet 1 5 meters off the ground higher is better for wind measurement in an open area Secure to fence post 4 4 wood 3 4 pole etc not included LEVEL INSTALLATION Use a bubble level not included to ensure level installation for accurate wind measurement Top or Side Mount Top Mount Side Mount 1 Insert the mounting base into the hole on the bottom of the sensor 2 Use one of the screws included in the hardware bag to fasten the lower sensor housing to the MOUNTING 3 Make sure the sensor is level 210008 im mounting base U si n g a b U b b eve 4 Fasten mounting base to post or railing using 2 screws Pole Mount 1 Insert pole we recommend 3 4 schedule 40 PVC 25 8 mm O D Do not install during not included or similar item all the electrical storms way into the hole on the bottom of the Do not place pole sensor Note Mounting base is not or sensor near used electrical lines or 2 Use one of the screws included in the electrical equipment hardware bag to fasten the lower sensor housing securely to the pole 3 Make sure the sensor is level using a bubble level The 3 in 1 sensor is now ready to use Basic Setup is Complete The 3 i
8. evice prior battery installation Remove batteries from equipment which is not to be used for an extended period of time Follow the polarity diagram in the battery compartment Promptly remove dead batteries from the device Dispose of used batteries properly Only batteries of the same or equivalent type as recommended are used DO NOT incinerate used batteries DO NOT dispose of batteries in fire as batteries may explode or leak DO NOT mix old and new batteries or types of batteries alkaline standard DO NOT use rechargeable batteries DO NOT recharge non rechargeable batteries DO NOT short circuit the supply terminals 7 Atomic Clock AcuRite atomic clocks use a radio controlled signal to synchronize to the correct time broadcast by the National Institute of Standards and Technology NIST Radio Station WWVB located near Fort Collins Colorado WWVB broadcasts the current time and date with split second accuracy The atomic clock and calendar will maintain the correct time and date and automatically update for daylight saving time to provide the most accurate timekeeping standard possible Please note Signal reception is normally better at night and when the weather is clear The atomic signal generally takes a few hours to synchronize so it is important to manually set the time and date after powering on the display Set the Time amp Date Press and hold the SET button located on the front of the disp
9. l 877 221 1252 for assistance 13 Care amp Maintenance Display Unit Care Clean with a soft damp cloth Do not use caustic cleaners or abrasives Keep away from dust dirt and moisture Clean ventilation ports regularly with a gentle puff of air 3 in 1 Sensor Care Clean the Sensor Clean with a soft damp cloth Do not use caustic cleaners or abrasives Insect Prevention Insects may cause obstructions and interrupt data by nesting or on the 3 in 1 sensor To limit this problem spray the OUTSIDE of the sensor with a household insect repellent Consult the insect repellent instructions prior to use Snow amp Freezing Weather The 3 in 1 sensor will not be damaged by freezing conditions Clean the Wind Anemometer Remove foreign matter from the outside of the sensor for free movement of the wind anemometer If needed use a small amount of spray lubricant clear silicone or graphite powder on the anemometer for improved movement Specifications HUMIDITY RANGE Outdoor 1 to 99 330ft 100m depending home construction materials Display 3 x AA alkaline batteries Sensor 4 x AA alkaline or lithium batteries DATA REPORTING Wind Speed 18 second updates Outdoor temperature amp humidity 18 second updates Indoor temperature amp humidity 60 second updates 14 Customer Support AcuRite customer support is committed to providing you with best in class service For assistan
10. lay unit for 3 seconds to enter SET MODE Once in set mode the preference you are currently setting will blink on the display To adjust the currently selected flashing item press and release the button press and HOLD to fast adjust To save your adjustments press and release the SET button again to adjust the next preference The preference set order is as follows TIME ZONE EST AST HAT AKT PST MST CST DST Daylight Saving Time ON or OFF CLOCK HOUR CLOCK MINUTE CALENDAR YEAR CALENDAR MONTH CALENDAR DATE you live in an area that observes DST DST should be set to ON even if it is not currently Daylight Saving Time You will automatically exit SET MODE if no buttons are pressed for 30 seconds Enter setup mode at any time by pressing and holding the SET button Select Measurement Units To select between U S standard units or imperial units press the SCALE button Measurement U S Standard Units Imperial Units Degrees Fahrenheit F Degrees Celsius C inHg inches of mercury hPa Hectopascal Wind Speed Miles per hour mph Kilometers per hour kph Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product Display Unit Placement Place the display unit in a dry area free of dirt and dust To ens
11. n 1 sensor will now synchronize with the display unit It may take a few minutes for synchronization to complete If both or one of the units appear to be functioning improperly please refer to the troubleshooting section OPERATION Using The Weather Center Learning Mode Self Calibrating Forecasting use a unique algorithm to analyze changes in pressure over a time period called Learning Mode to determine your altitude After 14 days the Learning Mode icon disappears from the display screen At this point the self calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction Weather Forecast AcuRite s patented Self Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard It generates a forecast with pinpoint accuracy personalized for your exact location View the complete list of icons at www AcuRite com acurite icons Multi Variable History Chart The multi variable history chart lets you monitor the change in conditions over the last 12 hour time period 12 6 3 2 1 0 Toggle between barometric pressure temperature and wind speed readings Wind Speed The Wind Speed area of the display features WIND SPEED PEAK AVERAGE and CURRENT WIND SPEED The multi variable history chart lets you monitor the change in AVERAGE hourly wind speed Barometric Pressure Subtle
12. ng from their use or misuse No person firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products Furthermore no person firm or corporation is authorized to modify or waive the terms of this paragraph and the preceding paragraph unless done in writing and signed by a duly authorized agent of Chaney This warranty gives you specific legal rights and you may also have other rights which vary from state to state For in warranty claims Chaney Instrument Co 965 Wells St Lake Geneva WI 53147 15 Weather Temperature Weather Kitchen Clocks Stations amp Humidity Alert Radio Thermometers amp Timers Its more than accurate It S ACUO RITE AcuRite offers an extensive assortment of precision instruments designed to provide you with information you can depend on to Plan your day with www AcuRite com Chaney Instrument Co All rights reserved AcuRite is a registered trademark of the Chaney Instrument Co Lake Geneva WI 53147 All other trademarks and copyrights Printed in China are the property of their respective owners AcuRite uses patented technology 00632 INST 082713 Visit www AcuRite com patents for details
13. or the 3 in 1 sensor The units must be within 330 ft 100 m of each other Make sure both units are placed at least 3 feet 9 m away from electronics that may interfere with the wireless communication such as TVs microwaves computers etc Use standard alkaline batteries or lithium batteries in sensor when temperature is below 4 F 20 C Do not No outdoor sensor use heavy duty or rechargeable batteries NOTE It reception may take up to 20 minutes for display unit and sensor to synchronize after batteries are replaced T no bars e Synchronize the units 1 Bring both the sensor and display unit indoors and remove batteries from each 2 Make sure the A B C switch on both units match 3 Reinstall batteries in the outdoor sensor 4 Reinstall batteries in the display unit 5 Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection 12 Flashing of the outdoor temperature may be an indication of wireless interference Make sure the A B C switch in the battery Outdoor temperature is flashing or showing dashes Inaccurate wind readings Display screen not working Inaccurate forecast Inaccurate temperature or humidity compartments of both the display unit and sensor are switched to the same letter You may choose A B or C but both units must match to sync up What is wind reading being compared to Pro weather stations are typically mounted at
14. tdoor temperature 24 Average Wind Speed Based on all wind speed readings from the past 2 minutes 25 Peak Wind Speed Highest speed from past 60 minutes 26 Current Wind Speed 27 History Chart Icon Indicates data is currently displayed on the History Chart 22 28 Learning Mode Icon Disappears after weather forecast self calibration is complete 29 12 to 24 Hour Weather Forecast Self Calibrating Forecasting pulls data from the outdoor sensor to generate your personal forecast BACK OF DISPLAY UNIT 30 Reset Button Full reset to factory defaults 31 Integrated Hang Hole For easy wall mounting 32 A B C Switch ID code that must match sensor s A B C switch to ensure units synchronize 33 Battery Compartment Cover 34 Battery Compartment 3 in 1 Sensor Setup Oo Set the A B C Switch function improperly Use lithium The A B C switch is located inside the battery compartment It can be set to A B or C However you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize batteries in the 3 in 1 sensor for temperatures below 4 F 20 C 1 Press the release lever and pull off the lower housing of the sensor 2 Remove the battery compartment cover 3 Insert 4 x AA batteries into the battery compartment as shown Follow the polarity diagram in the battery compartment Install or Replace Batteries Ac
15. uRite recommends high quality alkaline or lithium batteries for the best product performance Heavy duty or rechargeable batteries are not recommended A Replace the battery cover and The 3 1 sensor requires lithium lower housing of the sensor batteries in low temperature conditions Cold temperatures can cause alkaline batteries to A B C Switch set to match display unit Install Batteries 4 AA batteries KA BATTERIES 40 400 70 158 F BATTERIES rN melee 70 C 158 F Display Unit Setup AcuRite recommends high quality alkaline batteries for the best product performance Heavy duty or rechargeable batteries are not recommended Oo Set the A B C Switch Install or Replace Batteries Locate the A B C switch inside 1 Remove the battery the battery compartment Set compartment cover the A B C switch to A B or C 2 Insert 3 x AA alkaline You must select the same letter bakar se ia tex baler choices for both the display unit hace and the sensor in order for the Follow the polarity units to synchronize diagram in the battery compartment 3 Replace the battery cover A B C Switch set to match sensor ABC 4 3 AA batteries PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE lt WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS BATTERY SAFETY Clean the battery contacts and also those of the d
16. ure accurate temperature measurement place out of direct sunlight and away from heat sources or vents Display unit stands upright for tabletop use or is wall mountable gt 49 3 in 1 Sensor Placement The 3 in 1 sensor is designed to remain outdoors all year long Choose an open location with no obstructions above or around the sensor for the most accurate measurements Important Placement Guidelines Display unit and sensor must be within 330 feet 100 m of each other MAXIMIZE WIRELESS RANGE Place units away from large metallic items thick walls metal surfaces or other objects that may limit wireless communication PREVENT WIRELESS INTERFERENCE Place both units at least 3 feet 9 m away from electronic devices TV computer microwave radio etc LOCATE AWAY FROM HEAT SOURCES Position sensor away from heaters air conditioners chimneys exhaust vents asphalt and concrete surfaces that radiate heat LOCATE AWAY FROM HUMIDITY SOURCES Avoid installing the sensor near pools spas or other bodies of water Water sources may impact humidity accuracy LOCATE AWAY FROM SPRINKLER HEADS DO NOT install the sensor where it will be sprayed by a sprinkler system This may force water inside the sensor LOCATE AWAY FROM WIND OBSTRUCTIONS DO NOT mount the sensor with obstructions around it Consider a location that is a wide open area with few structures around to ensure accurate wind measurement Visit us onlin
17. variations in barometric pressure greatly impact the weather This weather center displays the current pressure with an arrow icon to indicate the direction the pressure is trending FALLING STEADY or RISING The multi variable history chart lets you monitor the change in pressure over time High amp Low Records The MIN MAX button displays minimum and maximum recordings for outdoor and indoor temperature and humidity To view the MINIMUM temperature and humidity readings press and release the MIN MAX button until the MIN icon appears on the display next to the low records To view the MAXIMUM temperature and humidity readings press and release the MIN MAX button until the MAX icon appears on the display next to the high records To reset the MINIMUM records first view the MIN records by pressing the MIN MAX button until the MIN icon appears on the display While viewing the MIN records press and hold the and SCALE buttons simultaneously for 3 seconds Dashes will display to confirm all MIN values have been cleared To reset the MAXIMUM records first view the MAX records by pressing the MIN MAX button until the MAX icon appears on the display While viewing the MAX records press and hold the and SCALE buttons simultaneously for 3 seconds Dashes will display to confirm all MAX values have been cleared Troubleshooting e Relocate the display unit and
18. warranty contained herein within ONE YEAR from date of sale will upon examination by Chaney and at its sole option be repaired or replaced by Chaney Transportation costs and charges for returned goods shall be paid for by the purchaser Chaney hereby disclaims all responsibility for such transportation costs and charges This warranty will not be breached and Chaney will give no credit for products it manufactures which have received normal wear and tear been damaged including by acts of nature tampered abused improperly installed damaged in shipping or repaired or altered by others than authorized representatives of Chaney The above described warranty is expressly in lieu of all other warranties express or implied and all other warranties are hereby expressly disclaimed including without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose Chaney expressly disclaims all liability for special consequential or incidental damages whether arising in tort or by contract from any breach of this warranty Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law By acceptance of any of Chaney s products the purchaser assumes all liability for the consequences arisi
Download Pdf Manuals
Related Search