Ubiquiti Networks UVC-PRO-C
Contents
1. ensure it is locked into the terminal Note To remove a wire from the terminal block push in the orange release button below the wire and pull the wire out mFi Connection Connect to an mFi mPort to integrate the UVC PRO into an mFi system The UVC PRO can be used as a digital sensor for machine to machine automation sensoring and monitoring 1 Connect an Ethernet cable to the yellow mFi RJ45 port Cy P w 2 Connect the other end of the cable to the mFi RJ45 port of an mPort 3 Launch the mFi Controller Click the Settings icon of the mPort 5 Inthe Configuration tab of the mPort Settings window click the Add icon and select Ubiquiti UVC PRO from the device type drop down list dc 9f db 12 91 d1 Configuration Details Select Devices 1 Port is unused Select device type E Select device type Counter Input Analog Input Digital Output 5v Output 12v Output 24v Ubiquiti mFi CS I Ubiquiti mFi DS Ubiquiti mFi MSC Ubiquiti mFi MSW Ubiquiti mFi THS Ubiquiti mFi THS Humidity Ubiquiti UVC PRO Note Ensure the latest version of mFi Controller is installed If Ubiquiti UVC PRO is not listed in the device type drop down list use Output 12v as the device type For more mFi integration details visit the mFi Knowledge Base at http community ubnt com mfi kb Connecting Power over Ethernet 1 Connect an Ethernet cable to2. rebranded or physically modified in any way II has been damaged due to errors or defects in cabling IV has been subjected to misuse abuse negligence abnormal physical electromagnetic or electrical stress including lightning strikes or accident V has been damaged or impaired as a result of using third party firmware VI has no original Ubiquiti MAC label or is missing any other original Ubiquiti label s or VII has not been received by Ubiquiti within 30 days of issuance of the RMA In addition the above warranty shall apply only if the product has been properly installed and used at all times in accordance and in all material respects with the applicable Product documentation all Ethernet cabling runs use CAT5 or above and for outdoor installations shielded Ethernet cabling is used and for indoor installations indoor cabling requirements are followed Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization RMA number from UBIQUITI NETWORKS during the warranty period and the Products being received at UBIQUITI NETWORKS facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal Information on the RMA process and obtaining an RMA number can be found at www ubnt com support warranty Disclaimer E
3. the gray PoE port 9 AN Sm 2 Connect the other end of the Ethernet cable to one of the following PoE Adapter Connect to the Ethernet port labeled POE on the UVC PRO PoE Adapter 4 TOUGHSwitch PRO or Carrier Connect to a port with 48V PoE enabled and skip steps 3 and 4 3 Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE Adapter 4 Connect the other end of the power cord to a power outlet The Power LED should light up on the UVC PRO Safety Notices 1 2 3 Read follow and keep these instructions Heed all warnings Only use attachments accessories specified by the manufacturer WARNING Do not use this product in location that can be submerged by water WARNING Avoid using this product during an electrical storm There may be a remote risk of electric shock from lightning Electrical Safety Information 1 Compliance is required with respect to voltage frequency and current requirements indicated on the manufacturer s label Connection to a different power source than those specified may result in improper operation damage to the equipment or pose a fire hazard if the limitations are not followed There are no operator serviceable parts inside this equipment Service should be provided only by a qualified service technician The equipment requires the use of the ground wire as a part of the safety certification modification or misuse can prov
4. T WJ UBIQUITI N E T WORKS R UMFi Video Camera Cable Accessory Model UVC Pro C Quick START GUIDE Introduction Thank you for purchasing the Ubiquiti Networks UniFi Video Camera PRO Cable Accessory model UVC Pro C The accessory is designed for use with the UVC PRO In addition to the convenient Reset button the UVC PRO Cable Accessory provides Ethernet Audio In Out and mFi RJ45 connectors This Quick Start Guide is designed to guide you through the installation of the UVC PRO Cable Accessory and also includes the warranty terms Package Contents UBIQUITI N ital dece cool UVC PRO Cable Accessory O Ring Quick Start Guide Installation Requirements Shielded Category 5 or above cabling should be used for all outdoor Ethernet wiring and should be grounded through the AC ground of the PoE We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with industrial grade shielded Ethernet cable from Ubiquiti Networks For more details visit www ubnt com toughcable TERMS OF USE Shielded Ethernet cable and earth grounding must be used as conditions of product warranty TOUGHCable is designed for outdoor installations It is the customer s responsibility to follow local country regulations Cable Overview Audio In Out Reset Button T x T Jj UVC PRO Coupling mFi RJ45 Port p PoE Port Connecti
5. XCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN UBIQUITI NETWORKS ITS AFFILIATES AND ITS AND THEIR THIRD PARTY DATA SERVICE SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND EXPRESS IMPLIED OR STATUTORY INCLUDING BUT NOT LIMITED TO REPRESENTATIONS GUARANTEES OR WARRANTIES OF MERCHANTABILITY ACCURACY QUALITY OF SERVICE OR RESULTS AVAILABILITY SATISFACTORY QUALITY LACK OF VIRUSES QUIET ENJOYMENT FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING USAGE OR TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYER S EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES INCLUDING THE INTERNET AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS INTERRUPTIONS DELAYS CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES UBIQUITI NETWORKS ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS DELAYS CANCELLATIONS DELIVERY FAILURES DATA LOSS CONTENT CORRUPTION PACKET LOSS OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING In addition UBIQUITI NETWORKS does not warrant that the operation of the Products will be error free or that operation will be uninterrupted In no event shall UBIQUITI NETWORKS be responsible for damages o
6. ide a shock hazard that can result in serious injury or death Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment Protective earthing is provided by Listed AC adapter Building installation shall provide appropriate short circuit backup protection Protective bonding must be installed in accordance with local national wiring rules and regulations Limited Warranty UBIQUITI NETWORKS Inc UBIQUITI NETWORKS warrants that the product s furnished hereunder the Product s shall be free from defects in material and workmanship for a period of one 1 year from the date of shipment by UBIQUITI NETWORKS under normal use and operation UBIQUITI NETWORKS sole and exclusive obligation and liability under the foregoing warranty shall be for UBIQUITI NETWORKS at its discretion to repair or replace any Product that fails to conform to the above warranty during the above warranty period The expense of removal and reinstallation of any Product is not included in this warranty The warranty period of any repaired or replaced Product shall not extend beyond its original term Warranty Conditions The above warranty does not apply if the Product I has been modified and or altered or an addition made thereto except by Ubiquiti Networks or Ubiquiti Networks authorized representatives or as approved by Ubiquiti Networks in writing I has been painted
7. national Sale of Goods shall not apply to any transactions regarding the sale of the Products Online Resources Support support ubnt com Community community ubnt com Downloads downloads ubnt com l UniFi Additional UVP Pro Accessories UVC Pro M Large Pole Mount Accessory Industrial Grade Metal Mount Fitsup to160 mm Diameter Poles Mounts One or Two Cameras Avaiable UniFi Video Products UVC NVR Stand Alone UniFi Video Appliance UniFi Video Controller Network Video Recorder 500 GB Hard Drive Low Power Consumption UVC Indoor Outdoor Camera 720p HD 30 FPS Day and Night with Infrared LEDs 9 Wall Ceiling or Pole Mount UVC DOME Indoor Wide Angle Camera 720p HD 30 FPS Day and Night with Infrared LEDs Ceiling Mount www ubnt com 2014 Ubiquiti Networks Inc All rights reserved Ubiquiti Ubiquiti Networks the Ubiquiti U logo the Ubiquiti beam logo ToughCable ToughSwitch and UniFi are trademarks or registered trademarks of Ubiquiti Networks Inc in the United States and in other countries All other trademarks are the property of their respective owners PH040914
8. on Description l Features two channel audio input Audio and one channel audio outputto a In Out speaker To reset to factory defaults press and Reece Button hold the Reset button for more than 10 seconds while the UVC PRO is already powered on Connects to a mFi mPort using a f standard RJ45 cable making the DE pl PAE UVC PRO a configurable digital sensor in an mFi system Ethernet port used for data and PoE Port provides Power over Ethernet PoE to the UVC PRO UVC PRO Coupling a to the UVC PRO waterproof Cable Installation 1 Install the waterproofing O Ring inside the waterproof gland of the UVC PRO cable 2 Align the RJ45 connector of the UVC PRO Coupling with the Ethernet port of the waterproof gland Ensure the RJ45 pin connections are facing each other 640 00107 01 3 Press the UVC PRO Coupling into the waterproof gland and ensure the alignment notches are lined up S 4 Secure the connection by turning the coupling nut clockwise Do not use any tools Only hand tighten the coupling nut Audio In Out Connection The Audio In Out Connection provides one channel output and two channel stereo input Use the included terminal block to connect your audio wires The audio wires should be 20 28 AWG solid single core wires 2 Channel Line In Audio Wiring Diagram 1 Insert a stripped wire into the corresponding hole of the terminal block 2 Slightly pull on the wire to
9. r claims of any nature or description relating to system performance including coverage buyer s selection of products including the Products for buyer s application and or failure of products including the Products to meet government or regulatory requirements Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT SPECIAL INCIDENTAL CONSEQUENTIAL OR OTHER DAMAGES INCLUDING LOST PROFIT LOST DATA OR DOWNTIME COSTS ARISING OUT OF THE USE INABILITY TO USE OR THE RESULTS OF USE OF THE PRODUCT WHETHER BASED IN WARRANTY CONTRACT TORT OR OTHER LEGAL THEORY AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Note Some countries states and provinces do not allow exclusions of implied warranties or conditions so the above exclusion may not apply to you You may have other rights that vary from country to country state to state or province to province Some countries states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages so the above limitation may not apply to you EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW THESE WARRANTY TERMS DO NOT EXCLUDE RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE EMBEDDED IN THE PRODUCT TO YOU The United Nations Convention on Contracts for the Inter
Download Pdf Manuals
Related Search