Rosewill RLLB-14001 fluorescent lamp
Contents
1. Quick Installation Guide Rosewill LED T8 Tube Safety measures must be practiced at all times during the installation of this product Use proper safety gear and tools for the installation procedure to prevent personal injury Prior to the installation of this product the installation instructions should be read and completely understood The installation instructions must be read to prevent personal injury and property damage Keep these installation instructions in an easily accessible location for future reference If necessary consult a professional electric technician or have them perform the retrofit service charges may apply The following tools will be required for retrofitting Not Included e 2x Wire Nuts or Electrical Tape e 1x Wire Stripper Cutter e 1x Phillips Screw Driver Option II CAUTION e Rosewill LED T8 Tube is suitable to be installed in T8 or T12 standard luminaries e Rosewill LED T8 Tubes cannot be used in retrofitted lamp fixtures which use Ballast and or starter e Rosewill LED T8 Tubes are intended to retrofit maximum six lamps UL Listed surface mount or fluorescent luminaries with or without diffuser that use straight tubular lamps These products are intended to be used in dry or damp locations only Instructions Rosewill LED T8 Tube with universal wide voltage driver are suitable to replace T8 fluorescent tubes in fixtures To use the Rosewill LED T8 Tube in an existing T8 fluorescent lamp fixture a r2. etrofit is required During retrofit rewiring is a MUST Please follow the installation steps on the following pages Retrofit Instructions Always turn off the power supply from the main circuit breaker first 1 Remove diffuser if provided and fluorescent lamp Open Remove Wiring Compartment Cover u a 4 Check and verify the lampholder socket type Some lampholders shunted instant start have a single wire connected to each lampholder while others non shunted rapid start have two wires connected to each lampholder one a f Non Shunted Shunted Non Shunted USE NON SHUNTED SOCKETS ONLY 5 Connect Black wire line and White Red wire neutral to corresponding wires into each of the lampholders AC 100v 277v AC 100v 277v L AA o jac Rosewill LED Tube 22Watt i ac Rosewill LED Tube 22Watt E AC 100v 277v gt Rosewill LED Tube 22wee 5K Rosewill LED Tube 22wa gt e Rosewin LED Tube 22wee TH e Rosewilt LED Tube 22wet Close up wiring compartment Install Rosewill LED T8 Tubes Ensure the Rosewill LED T8 Tube end labeled AC is inserted into the retrofitted end of the lamp fixture Pictured below 8 Switch on power
Download Pdf Manuals
Related Search