LG 47LY540S
Contents
1. OK Select a list to download and press the OK button 13 14 O Select the EPK option software update and then use the green and yellow buttons to download either SPI Boot or LG Boot Logo If you checked the LG Boot Logo checkbox then the Splash image if selected will be unchecked Also if you select the LG Boot Logo and proceed with the download the existing Splash image will be deleted Ez Download J TLL GlobalClone00001 TLL Eee eee aan v LOGO 1360X768 jpg EPK 02 00 00 01 Forced Update Option EPK M1A_DVB_CN_RevNo1901_V02 0 SP Boot __ LG Boot Logog Apply 6 When you are finished with your selections use the gt button to select Apply and then press OK OO Wait for the download to complete When it is finished your TV will be turned off 0 NOTE e If the DZM file is still in the USB after the download is complete An Ez Download pop up window will appear and list the file types such as TLL LOGO or EPK with the previously downloaded lists checked automatically e If the global TLL and model TLL files exist in the same USB root directory then only the global TLL will be shown If the global TLL has been deleted then the model TLL will be shown USB Cloning An Installer can quickly set up and clone multiple TV sets at a property These cloned TVs will all have the same Master TV Setup Public Display Mode Installation Menu settin2. LG Life s Good INSTALLATION MANUAL LED TV LG LED TV applies LCD screen with LED backlights Please read this manual carefully before operating your set and retain it for future reference 32LY340C UA 42LY540S UA 32Y340H UA 42LY340C UA ATLY540S UA 39Y340H UA A7TLY340C UA 55LY540S UA 42Y340H UA 55LY340C UA ATY340H UA 55Y340H UA www lg com TABLE OF CONTENTS DIGITAL SIGNAGE MEDIA PLAYER Digital Signage Media Player Overview INSTALLATION MENU Introduction Public Display Settings TV Manager 1 USB 2 Diagnostics Password Change Set ID Setup Configuration Setup Multi Timer Lock Mode External Speaker HCEC Setup SuperSign Server Setup DIGITAL SIGNAGE MEDIA PLAYER Digital Signage Media Player Overview Only for LY540S series The Digital Signage Media Player can play content produced and distributed by SuperSign Elite W Supported content types consist of photographs videos external inputs such as TV broadcasts texts and music 1 Executable content e cts These files can be played at any time e sce These files can be played at any time like cts files or they can be played to a specific schedule 2 Using the My Media menu to play files e After inserting the USB storage device access the My Media menu and select an executable content file under the All Media tab or the Contents List tab to play the file 3 Auto play on USB insertion e Files with ex
3. SMW 02 00 00 01 Micom 0 00 84 a Use the v button to select the Lock Mode If Lock Mode items are disabled the following features will be unavailable e Data Service Teletext EPG Sub Title Caption Include MPEG4 MHEG e USB Enable Exclude S W update e Factory Reset 26 External Speaker Installation Menu V 3 0 Public Display Settings TV Manager Password Change External Speaker Set ID Setup Volume Control Configuration Setup Output Multi Timer Lock Mode External Speaker HCEC Setup D Previous S W 02 00 00 01 Micom 0 00 84 Use the v button to select the External Speaker 1 Volume Control e Selects the volume control method of an external speaker You can choose either Variable or Fixed Variable is linked to the main volume OSD and change the volume 0 1 Watts Fixed produces a fixed output The default is Off 2 Output e This item is enabled when Volume Control is set to Fixed You can choose one of 7 steps 0 01 0 03 0 05 0 1 0 2 0 5 1 Watts NOTE 5 Optical supported models e If You use External Speaker as Variable Mode External Speaker will be off when you select External Speaker Optical in Sound Out menu HeadPhone supported models e External Speaker and HeadPhone can not be used simultaneously e Disconnect Headphone to use External Speaker External Speaker only works when HeadPhone is disconnected 27 Speaker o
4. that should be ignored e The default value is 0 4 Key Operation e Manage key usability of Local Front Key and Remote Control When selected to Yes following IR Operation and Local Key Operation will be worked by below 4 1 IR Operation Decide whether work the LG remote control or not e Able to set Normal Use PWR Only Block All e When IR Operation is set to Block All all normal remote keys don t work Use PWR Only Block except power makes block all remote keys except power key e Although IR Operation value is Use PWR Only or Block All It can work in Service mode In Start In Stop Power Only ADJ Hotel Mode Hotel Mode Ready P Check S check In Time FMode Init FMode Start FMode AV FMode F 1 Menu key action to enter the Installation Menu and key action with Special menu In Start EZ Adjust are still available e When IR Operation is set to 0 Work all remote keys are available 4 2 Local Key Operation Decide to operate Local Front Key working behavior by setting Local Key Operation as Normal Use PWR Only Block All e When Local Key Operation is set to Block All all local keys don t work If value is Use PWR Only it blocks all local keys except power key e When Local Key Operation is set to Normal all local key are available Exception In case of power off condition with all key are blocked Power On Status
5. Setup SMW 02 00 00 01 Micom 0 00 84 Use the v button to select the Set ID Setup e Set ID Lock Set the Set ID item in Option Menu whether to activate or not Set to Yes Work or No Do Not Work Set ID Set the Set ID of TV Set with 1 99 Configuration Setup e Image shown may differ from your TV Installation Menu V 3 0 Public Display Settings Configuration Setup Number of RCU 0 TyNisneges Splash Offset Time 0 Sec Password Change Big Peay lt No gt Set ID Setup USB Auto Playback Disable Multi Timer Auto Sensing To Set Lock Mode Forced DVI Audio Off External Speaker Screen Saver Cube Yes NOEC Setup Video Mute No SW 02 00 00 01 Micom 0 00 84 Noise Mute No D Previous OK 1 Number of RCU e It is a function to set whether to use Select RCU or not and set number of RCU e When Number of RCU is set to 0 this function do not use e Number of RCU value range 1 9 e RCU Remote Control Unit It is special RCU that operates only setted number of RCU in TV 2 Splash Offset Time e Set the splash image display time e When Splash Offset Time is set to OFF TV logo splash image do not display e The time can be set to between 0 and 10 seconds 3 Big UI Display e When Big UI Display is set to Yes TV displays enlarged Channel Banner UI 4 USB Auto Playback e When USB Auto Playback is set to Movie TV
6. TV can be only turned on with the input source which is irrelevant from the channel related information set volume input in On Time Menu Auto AV and HDMI CEC still work regardless of Input Source Change s value When Input Source Change is set to Yes Change possible changing input source is available y y y y y x y y 5 3 Channel Change Decide to change channel or not by setting Channel Change as Yes Change Possible or No Change Impossible when present source is TV e When Channel Change is set to No Change Impossible Channel Key Numeral Key List Key Q View Key don t work and entering Channel Menu in the Main Menu OSD is impossible Channel item in On Time menu will be fixed Entering Setup Menu in the Main Menu OSD is impossible regardless of Setup Menu item e When Channel Change is set to Yes Change Possible Channel Key Numeric Key List Key Q View Key does work and entering Channel Menu in the Main Menu OSD is possible 5 4 Menu Display Function to decide whether work with menu including relevant menus too of control key Yes Enter possible or not No Enter Impossible e Although select No Enter impossible the action that press a Menu button for 5 seconds to enter Installation Menu is available e When select Yes Enter possible Menu works 5 5 OSD Display Decide to disp
7. USB device to the USB IN jack on the TV _ 1 2 Use the v button to select the TV Manager option and then press the OK button Installation Menu V 3 0 LG Hotel Mode Setup TV Manager Password Change Set ID Setup Configuration Setup Multi Timer Lock Mode External Speaker HCEC Setup S W 02 00 00 01 Micom 0 00 84 Use the a v button to select the USB and Logo Image Download and press the OK button TV Manager Ez Download Receive from USB Send to USB Logo Image Download OK Use the y button to select the desired file name and press the OK button Logo Image Download Image1 jpg Image2 jpg Image3 jpg D Previous NOTE gt Splash Image update function supports only JPEG format file of less than 1 MB filesize Except for JPEG images with progressive encoding gt We recommend you that splash image resolution match the TV s panel resolution gt Max resolution of splash image Full HD gt 1920x1080 HD gt 1360x768 gt Min resolution of splash image Full HD gt 64x64 HD gt 64x64 gt TV keep splash image until you change a new splash image 2 Diagnostics Diagnostics Setup Introduction This diagnostic function provides current status information of the TV in XML file format using a USB device If the user sets a signal standard level SignalTrace checks the signal strength status of the digital channel that the user tuned to It checks
8. and records good and bad channel signals and then provides the signal information to a USB storage device in XML file format Installation Menu V 3 0 Public Display Settings TV Manager Password Change Set ID Setup TV Manager USB Diagnostics Setup DIET OE Cer Configuration Setup Multi Timer Lock Mode External Speaker HCEC Setup S W 02 00 00 01 Micom 0 00 84 1 Overview Diagnostics 1 It provides status information of the TV and information about the current input in XML file format There are two kinds of information There is information which is extracted regardless of the model such as the model name or boot version and there is information which is available depending on the model such as the micom version PTC version etc The information created in the XML file can be checked in the TV s UI by pressing 88888888 in the TV s Option menu 2 Ifa SignalTrace standard level is set it saves the average value of the channel signal with less than 30 tuning counts to the digital broadcasting channel If the count is more than 30 it saves good and bad signals by comparing the average signal value to the current signal strength and signalTrace standard level SignalTracer Set value gt Bad signal BML average value gt strength current signal strength and BML strength gt SignalTracer Set gt Good signal BML lt strength and strength BML gt SignalTracer Set It provides the good and bad
9. input When Aux Source Setting is set to Yes Work the RJP or HDMI CEC HTNG will not operate 9 1 Input Source e Available Input Source List 9 2 Setting e Decide whether selected Input Source is usable Enable or not Disable e User cannot disable the current input s Aux Source Setting 10 10 Factory Reset Factory reset returns all the parameters to the default settings Factory Reset e Press Enter key to proceed factory reset and confirmation message window will be shown All user settings and channel settings will be reset Still Continue Yes e When select Yes all television settings except UTT value should write to the default settings 11 12 Public Display Settings Value Range Table Item Enable Disable Initail Public Display Mode Yes No No Power On Status STD Volume Yes No No Start Volume Off Minimum Volume Maximum Volume Off Maximum Volume Minimum Volume 100 100 Minimum Volume 0 Maximum Volume 0 Key Management Yes No No IR Operation Work 0 Use PWR Only 1 Bock All 2 Work 0 Local Key Operation Work 0 Use PWR Only 1 Bock All 2 Work 0 Limited Mode Yes No No Setup Menu Yes No Yes Input Source Change Yes No Yes Channel Change Yes No Yes Menu Display Yes No Yes OSD Display Yes No Yes System Provider Mode Yes No No Po
10. AV or Audio In 1 component ports e The video signal will be transmitted through HDMI to be displayed on the screen in standard quality e For the audio signal the priority order is the RGB gt AV gt Audio In component ports 8 Screen Saver Cube e When Screen Saver Cube is set to No TV will do not display LG Screen Cube 9 Video Mute e When Video Mute is set to Yes for Blank 10 Noise Mute e When Noise Mute is set to Yes audio mutes when no signal is present Multi Timer Installation Menu V 3 0 Public Display Settings TV Manager Multi Timer Password Change Set ID Setup Multi Timer On Timer Configuration Setup Off Timer Multi Timer Lock Mode Previous External Speaker HCEC Setup S W 02 00 00 01 Micom 0 00 84 Use the v button to select the Multi Timer 1 Multi Timer e It is a mode to set whether to use or not e When Multi Timer is set to On You can adjust On Timer Off Timer menu 2 On Timer e It sets the time for turning the TV on A maximum of 5 timers can be set 3 Off Timer e It sets the time for turning the TV off A maximum of 5 timers can be set Lock Mode Installation Menu V 3 0 Public Display Settings TY Meneger Data Service Password Change gt USB Set ID Setup Factory Reset Lock Mode Configuration Setup ri Multi Timer Lock Mode External Speaker HCEC Setup
11. e range of hotel features can be performed simply on additional window to enhance the LG hotel TV s easy installation and convenient operation for Hotelier and System Integrators e Image shown may differ from your TV Installation Menu V 3 0 Public Display Settings TV Manager LA y Password Change PICTURE Set ID Setup Configuration Setup l T Multi Timer Fi war Lock Mode OPTION Sman Share External Speaker HCEC Setup S W 02 00 00 01 Micom 0 00 84 GD Press the Home button for more than 5 seconds using the user remote control channel information will appear at top left on the screen Enter a four digit password and press OK button e The TV is set with the initial password 1 1 0 5 Use the v button to select the desired menu Public Display Settings e Image shown may differ from your TV Installation Menu V 3 0 Public Display Settings V 3 0 Public Display Settings Public Display Mode a Yes gt TV Manager Power On Status Password Change Volume Set ID Setup gt Start Volume Configuration Setup Multi Timer Lock Mode External Speaker HCEC Setup e Maximum Volume e Minimum Volume e Key Operation e IR Operation Normal e Local Key Operation Normal Previous OK SW 02 00 00 01 Micom 0 00 84 Use the v button to select the Public Display Settings Use the OK button and then v button to select Public D
12. eceive from USB USB Port1 Select file type Global TLLo Model TLL fo of 1 1 fo aT 1010 0 0 E H H E D Previous The TV is changed to Standby mode after a successful download If the download failed the TV will changed to the initial installation screen Send To USB e Image shown may differ from your TV GD Plug USB memory card into the USB port of the TV Use the v button to select the TV Manager option and then press the OK button Installation Menu V 3 0 Public Display Settings TV Manager Password Change Set ID Setup Configuration Setup Multi Timer Lock Mode External Speaker HCEC Setup SMW 02 00 00 01 Micom 0 00 84 Use the v button to select the USB and Send to USB and press the OK button TV Manager Ez Download Diagnostics Receive from USB Send to USB Logo Image Download Previous Use the v button to select the desired file name and press the OK button Send To USB USB Port1 Select file type f Global TLLo Model TLL Select the file name and press OK to start A jo oF 4 o at 10 01010 at H IN i v D Previous OK 6 The TV is changed to the initial installation screen after a successful download 17 18 Logo Image Download Make a LG_DTV folder on the USB flash drive and then copy the splash image file to that folder e Image shown may differ from your TV Connect the
13. ecutable content in a specific folder are automatically played when Power On is selected or when a USB drive is inserted after Power On e Ifa USB storage device is already inserted when Power On is selected files with executable content in the normal folder are played by default If the normal folder does not exist files with executable content in the AutoPlay folder are played instead e Ifa USB storage device is inserted some time after Power On has been selected files with executable content in the AutoPlay folder are played by default If the AutoPlay folder does not exist files with executable content in the normal folder are played instead e Auto play on USB insertion is only supported by USB port 1 4 Distributing and playing content via SuperSign Elite W e If a USB storage device is inserted in USB port 1 the LAN cable is connected and the SuperSign Server settings are configured content can be received from the SuperSign Elite W server e Schedules can be set to play a variety of specific content or media files including photos and videos from SuperSign Elite W whenever the user wants e Messages created by the user can be sent to the player via SuperSign Elite W e For more information see the SuperSign Elite W manual INSTALLATION MENU Introduction The abundant functions for Hotel TV linked with software installation can be projected on OSD as Installation Menu The wid
14. ed e TV should off and on after apply this setting 7 DTV Channel Update It is a mode to set whether to update DTV channel information automatically or not e When DTV Channel Update is set to Auto the function to update TV s channel map according to DTV channel s stream information e DTV Channel Update is set to Manual the function to keep TV s channel map even though DTV channel s information is changed 8 Power On Default Set the input source or channel to display and A V settings when turn on power in AC Power On or Stand by status 8 1 Input Source Set whether it is turned on by the set input source or by the last stored input source e It is turned on by the Last Memory Input if the Input source is turned off e It is turned on by the Last Pr If the Input source is turned off and the last memory Input is the RF e The available Input Source values should be rotated e If both the Input source and the On Time menu are set the Input source takes the priority e When the Input source is changed to the TV Channel menu is available e When the Input source is changed to the ATV the Program No is set to 0 If the channel map structure does not support this it depends on model s channel handling e Access to an input source item and a channel in On Timer menu must be disabled when Power On Default is activated 8 2 Tune Mode Tune the selected start channel with physical or virtua
15. finds and plays the USB s movie files located at the root top directory Movies if USB is plugged in Some menu OSDs may prevent this function e When USB Auto Playback is set to Photo TV finds and plays the USB s photo files located at the root top directory Photos if USB is plugged in Some menu OSDs may prevent this function e If it reaches the last file it starts the first file again 23 24 5 15Min Auto Off e When 15Min Auto Off is set to Enable TV will turn off if there is no signal in 15Min 6 Auto Sensing If Auto Sensing is set to To Set the input is automatically switched when the input signal that you set to ON is received If SIMPLINK is set to On HDMI is automatically set to Disable and can not work If the signal is removed while Auto Sensing automatic input switch is enabled the input returns to the previous setting If the several inputs are connected by enabling Auto Sensing and the automatic input switch is performed several times the input returns to the previous setting only for the last input and does not repeat the operation for the rest For the AV input connected using the euro scart cable Auto Sensing does not work for the TV input because the Auto AV function is enabled For other inputs Auto Sensing works normally 7 Forced DVI Audio e When Forced DVI Audio is selected the audio signal from the HDMI port will be transmitted through the RGB
16. gs User A V settings and the Channel Map This newer procedure significantly decreases the installation time that would be necessary if the standard RS 232C method were used instead Introduction 1 Overview USB Cloning Procedure e Commercial TVs have the capability to support cloning internal TV data and programme information with an external clone device called USB Cloning in order to copy TV data accurately and quickly The clone internal functions use slightly different internal processes for the two types of commercial TVs However the UI of cloning feature remains the same in both Regarding the demands over the current cloning feature for quicker clonin g better portability and etc we would like to announce the cloning process via USB port named as USB Cloning USB cloning process is divided into 2 main processes One is writing the previously saved TV data into the TV and one another is reading of current TV data into USB memory card To avoid any confusion due to the words it is clearly specified as Receive from USB and Send to USB in the whole process 2 Data To Be Cloned e The data cloned are the same data cloned by previous USB Cloning Details are explained in the following 1 TV data includes A Installer Menu settings B Main menu settings Audio Picture etc 2 Analog Digital Channel information includes A Channel numbers B Channel label C Channel attributes including channel type skip
17. isplay Mode When Public Display Mode is set to Yes Work all functions of Public Display apply 1 Public Display Mode ATSC e Decide to work all functions of Public Display Mode or not by setting Public Display Mode as Yes Work or No Do Not Work e When Public Display Mode is set to Yes Work all functions of Public Display apply e When Public Display Mode is set to No Do Not Work all functions of Public Display Do Not apply e When it is set to Yes Key Lock item of the User menu is disabled and the OSD is displayed same to the Local Key Operation setting of the Public Display e When it is set to Yes all items reserved at the Schedule list are deleted and the reservation function is not supported applied for the model offering the reservation function e The TV triggered by the external device ex SIMPLINK TVLink Tuner etc operates separately from the Public Display e When it is set to Yes User Menu gt Option gt Factory Reset is disabled 2 Power On Status e Decide to select working status of TV Set when turn on main power e You can set with PWR STD LST e PWR always make TV set On status when turn on main power e STD make Stand by status when turn on main power e LST make TVSet work like previous power status As same concept as Power Backup mode If main power were turned off in Power On status TVSet would work in On status If main power were
18. l method Usually digital channel uses virtual channel and analog channel uses physical channel 8 3 Major Select major part of start channel number if Input source value is TV in case of ATV it means physical channel number 8 4 Minor Select minor part of start channel number if Input source value is TV 8 5 A V Setting If A V Setting is changed from No to Yes parameters that are set before entering Installation Menu are applied whenever turn on power e Following Parameters are applied to basic Picture section PSM mode Picture Data Contrast Brightness Color Sharpness Tint Sound section SSM mode Sound Data Balance Equalizer Data AVL Auto Volume Level and Language Teletext language ARC Data Except these other parameters are applied differently according to the TV Set 8 6 Aspect Ratio The aspect ratio determines the default aspect ratio that the set returns to on power up e The modes are as follows Aspect ratio Disabled 0 stays at previous state same as consumer model Aspect ratio Set by Program 1 Aspect ratio 4 3 ratio 2 Aspect ratio 16 9 ratio 3 e If enabled upon power up the television reset the aspect ratio to the specified state regardless of how the user has previously changed the aspect ratio 9 Aux Source Setting The Auxiliary Input Source Setting feature will enable or disable for each external
19. lay OSD or not by setting OSD Display as Yes Display or No Do not Display e When OSD Display is set to No Do not Display all OSD is not displayed except some exception e Although select No Do not Display the action that press a Menu button for 5 seconds to enter Installation Menu and entering service menu are available In Start Power Only Adjust Installation Menu 5 6 System Provider Mode System Provider Mode allows access to the menu system from the front panel or remote control but access is controlled as follows e When value is Yes Accessible Items on the menu system others are not permissible Input select screens Sleep timer Aspect Ratio Closed Caption Lock My Media Network Support Bluetooth Menu e Q menu which is related to Setup Menu is not accessible e f the channel map is empty Auto tuning guide dialog should be blocked by pressing List Fav CH CH keys 6 Power Management The Power Management feature will turn off the television receiver if no input control command is received from either the Local or IR Key within a selected hours e Activity on either of these inputs shall restart the Power Management timer and check key time interval again e This entry can be set to a value which is corresponding to the desired hours 1 to 7 e Default value is Off disabl
20. nd Receive Send Only O X Receive Only X O All O O OFF xX X Send TV sends OpStandBy 0x0c when TV is turned off Receive TV is available to be turned off by OpStandBy 0x0c 2 HTNG HotelMode e If the following options are selected because of the HTNG command Power On Default Start Volume Maximum Volume Minimum Volume or Start Volume then the value for the HTNG HotelMode changes automatically to Yes and even if the HotelMode is set to No the above options are still affected e If you change it to No then the values set by the HTNG will be canceled SuperSign Server Setup Only for LY540S series Installation Menu V 3 0 Public Display Settings TV Manager Password Change SuperSign Server Setup Set ID Setup Play Name Configuration Setup Server IP Setting Press OK Server IP Status Not connected Multi Timer Lock Mode External Speaker HCEC Setup SuperSign Server Setup S W 02 00 00 01 Micom 0 00 84 OK D Previous OK ay Use the v button to select the SuperSign Server Setup 1 Play Name e You can set the name of a player you want to control in SuperSign Manager Up to 20 characters 2 Server IP Setting e You can set the IP address of the computer server on which SuperSign Manager is installed 3 Server IP Status e It displays the connection status with the server Not connected Your TV is not connected to the SuperSign server Waiting for A
21. pen the tv_signal rms file on a PC and check XML created in the file If the user tunes to the same digital channel 30 times the signal average is calculated If the tuning count to the same digital channel is more than 30 the good bad signals current signal average signal date and channel information are saved in changedSignal_report XML tag x The information created in SignalTrace is not displayed in the TV s Ul x In USB cloning the configured Signal Tracer value is not cloned x When a factory reset is performed Signal Tracer Set is disabled and traced information is deleted Password Change e Image shown may differ from your TV To ensure more security Password can be changed by installers own design Installation Menu V 3 0 Public Display Settings TV Manager Password Change Change Password Set ID Setup gt 3 Password Change Confirm Password Configuration Setup Multi Timer Lock Mode External Speaker HCEC Setup a Previous SMW 02 00 00 01 Micom 0 00 84 Use the v button to select the Password Change and then press the OK button 2 Enter four digit password Input the password again for confirmation 21 Set ID Setup Installation Menu V 3 0 Public Display Settings TV Manager Set ID Setup Password Change Set ID Lock BRINCH gt fsp Configuration Setup Previous Multi Timer Lock Mode External Speaker HCEC
22. ping status and etc 3 Input Source e The user needs a USB memory card with FAT formatted to make successive cloning via USB port A USB memory card size more than 128 Mega Bytes and less than 4 Giga Bytes is recommended NOTE e Currently support the preceding USB file system for FAT file format only Other file formats including NTFS is not currently supported Microsoft Windows officially supports FAT for the USB memory card 16 Receive From USB e Image shown may differ from your TV GD Plug USB memory card into the USB port of the TV Use the a v button to select the TV Manager option and then press the OK button 6 Installation Menu V 3 0 Public Display Settings TV Manager Password Change Set ID Setup Configuration Setup Multi Timer Lock Mode External Speaker HCEC Setup S W 02 00 00 01 Micom 0 00 84 Use the a v button to select the USB and Receive from USB and press the OK button Below explains the naming rules for TTL files The supported model line will be in the name of the file but the screen size will be listed as xx This allows TVs having the same chassis model number to use the same TTL file without regard to the screen size ex The name of TTL file is xxLP360H TAO0000 TLL for 32 42LP360C model TV Manager Ez Download Send to USB Logo Image Download OK Use the a v button to select the desired TTL files name and press the OK button R
23. pproval Your TV is connected to the SuperSign server but not yet approved Rejected Your TV is connected to the SuperSign server but has been rejected Connected Your TV is connected to the SuperSign server and has been approved 31 LG Life s Good
24. signals average signal value channel information and date information etc in USB in XML file format Saved in changedSignal_report tag Up to 127 reports for good and bad signals are saved If the reports number more than 127 they are written again beginning from 1 2 Saving some status information of the TV set through USB in XML file format Create an LG_SVC folder on the USB on a PC Create an empty file named tv_signal rms in the LG_SVC folder Insert the USB device into the TV If the Diagnostics is completed message is displayed remove the USB open the tv_signal rms file on a PC and check the XML model name FirmwareVersion bootVersion etc created within the file The information created in the XML file can be checked in the TV s UI by pressing 88888888 in the TV s Option menu 19 20 3 Saving signal status information of digital channels through SignalTrace in XML format e Go to Installation menu gt TV Manager gt Diagnostics gt Diagnostics Setup e Set the level value in Signal Tracer Set Disable 10 to 90 TV Manager Diagnostics Setu USB Diagnostics Setup g i gt Signal Tracer Set Previous OK Diagnostics e Change the channel and tune to a digital channel then maintain the status for more than 5 seconds e Create an empty file named tv_signal rms in the LG_SVC folder e Insert the USB device into the TV e If the Diagnostics is completed message is displayed remove the USB o
25. turned off in Stand by status TVSet would work in Stand by status 3 Volume 0 lt Min lt Start lt Max lt 100 e Decide to apply volume policy of Start Volume Maximum Volume and Minimum Volume as Yes Work or No Do Not Work 3 1 Start Volume This entry sets the start volume level when is power on e The level is specified as a number between minimum volume to maximum value Min lt Start lt Max e The default setting is Off disabled e When enabled if the value is lower then the minimum specified in the minimum volume entry the minimum volume entry must be used e When enabled if the value is larger then the maximum specified in the maximum volume entry the maximum volume value must be used e Access to a volume in On Timer must be fixed to start volume when Public Display Mode Yes and Start Volume Off 0 100 were set simultaneously 3 2 Maximum Volume This entry sets the maximum volume level the set The level is specified as a number between Minimum Volume to 100 Min lt Max lt 100 e If the command volume up to higher than maximum volume is received that should be ignored e The default value is 100 3 3 Minimum Volume This entry sets the minimum volume level the set will produce e The level is specified as a number between 0 to Maximum Volume 0 lt Min lt Max e If the command volume down to lower than minimum volume is received
26. utput SETUP Connect the external speaker to the external speaker out jack on the TV Pere rrr EXTERNAL SPEAKER OUT See NOTE e External speaker must be used three plug SE Single Ended Stereo as shown in the drawings and external speaker fully inserted with external Speaker Jack e Otherwise it will cause defect 28 HCEC Setup Installation Menu V 3 0 Public Display Settings TV Manager Password Change Set ID Setup HCEC Setup CEC Mode Default gt IR Decoding No Device ID StandBy HTNG HotelMode Previous Configuration Setup Multi Timer Lock Mode External Speaker SMW 02 00 00 01 Micom 0 00 84 OK Use the v button to select the HCEC Setup 1 HCEC Setup e When CEC Mode is set to HCEC Mode IR Decoding Device ID Stand By item will be enabled and SIMPLINK feature will be automatically changed to On state and user will not change this status through SIMPLINK menu a IR Decoding e If IR Decoding is set as Yes TV decodes IR signal to generate a CEC command and sends it to device b Device ID e Sets the ID of Device Logical Address You can choose from 0x01 to Ox0E and AIl the default value is All This works only when TV is ON 29 30 c Stand By e Sets the sending and receiving scenario of OpStandBy 0x0c command e The detailed scenario is described on the table below Se
27. value turns to PWR and disabled status to fix value for power on operation fool proof routine Power On Status e Power On Status Key Operation Key Operation lt No IR Operation IR Operation Local Key Operation Local Key Operation 5 Limited Mode Configure TV function s limitation When selected to Yes following sub menus will be worked by below 5 1 Setup Menu Decide to enter Setup Menu as Yes Enter possible or No Enter impossible 5 2 Input Source Change Decide to change input source or not by setting Input Source Change as Yes Change possible or No Change impossible e When Input Source Change is set to No Change impossible INPUT key doesn t work and Input Source Changing via TV D A key TV RADIO key aren t possible ex Press TV RADIO Key in HDMI source to view TV channel User s input pressing Channel key numeral key List key Q View key in all Input source except TV source doesn t work Entering Setup Menu item in the Main Menu OSD except TV mode doesn t accepted Because entering Setup Menu item makes present mode as TV mode even though present mode is not TV Change to TV mode isn t allowed TV set always turns on fixed input source and volume information regardless of already set information Entering Setup Menu except TV mode is impossible regardless of Channel Change or Setup Menu items value
28. wer Management Off 1 7 Off DTV Channel Update Auto Manual Auto Power On Default Yes No No Input Source Off ATV DTV Off Tune Mode Physical Virtual Physical Major Subject to Ch Type 2 Minor Subject to Ch Type 0 A V Setting Yes No No Aspect Ratio Disable 0 Set by Program 1 4 3 2 16 9 3 Disable Aux Source Setting Yes No No Input Source Aux Input AV1 MAX_INPUT AV1 Settng Enable Disable Enable Factory Reset Confirmation window Yes No TV Manager 1 USB Ez Download Ez Download is a function that enables users to download the desired items all at once such as EPK software update file TLL see Send to USB descriptions for more information regarding file types Logo Image etc TLX MICOM for Pro Centric Splash images and EPK files should be copied into the folder named LG_DTV on the USB TLL files should be copied to the root folder of the USB e Image shown may differ from your TV Plug USB memory card into the USB port of the TV 2 Use the v button to select the TV Manager option and then press the OK button Installation Menu V 3 0 Public Display Settings TV Manager Password Change Set ID Setup Configuration Setup Multi Timer Lock Mode External Speaker HCEC Setup S W 02 00 00 01 Micom 0 00 84 Use the a v button to select the USB and Ez Download and press the OK button TV Manager Diagnostics Receive from USB Send to USB Logo Image Download
Download Pdf Manuals
Related Search