Sharp LC-50LE760E 50" Full HD 3D compatibility Smart TV Wi-Fi Black, Silver LED TV
Contents
1. the CI module only when the TV is SWITCHED OFF You should refer to the module instruction manual for details of the settings Each USB input of your TV supports devices up to 500mA Connecting devices that have current value above 500mA may damage your TV By connecting an HDMI cable to your TV you have to use only a shielded HDMI cable to guarantee a sufficient immunity against parasitic frequency radiation If you want to AN connect a device to the TV make sure that both the TV and the device are turned off before making any connection After the connection is done you can turn on the units and use them First Time Installation When turned on for the first time the language selection screen is displayed Select the desired language and press OK On the next screen set your preferences using the navigation buttons and when finished press OK to continue You can activate Store Mode option at this point This option is intended only for store use It is recommended to select Home Mode for home use If Store Mode is selected a confirmation screen will be displayed Select YES to proceed This option will be available in Other Settings menu and can be turned off on later If Home Mode is selected Store Mode will not be available after the First Time Installation Press OK button to continue Aerial Installation If you select Aerial option from the search type selection screen the television will search fo2. Connection back amp side SPDIF Optical Out Connection back Side AV Audio Video Connection side OG Ap ones E l aH eo D Mar gf Ek Side AV Connection Cable supplied Headphone Connection side YPbPr Video Connection side H 1 A OG 1 1 H USB Connection side CLK COMMON INTERFACE Cl Connection side CK Subw out Subwoofer Connection back Ethernet LAN Connection back English 6 Note When connecting a device via the YPbPr or Side AV input you must use connection cables to enable connection For Side AV input you should use the supplied cable See the illustrations on the left side To enable PC audio you will need to use PC YPBPR AUDIO CONNECTION WHITE amp RED inputs If an external device is connected via the SCART socket the TV will automatically switch to AV mode When receiving DTV channels Mpeg4 H 264 or while in Media Browser mode output will not be available via the scart socket When using the wall mounting kit available from third party in the market we recommend that you plug all your cables into the back of the TV before mounting on the wall Insert or remove
3. Network Alliance HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC YouTube and the YouTube logo are trademarks of Google Inc The HD TV 1080P Logo is a trademark of DIGITALEUROPE The DVB logo is the registered trademark of the Digital Video Broadcasting DVB project EC Declaration of Conformity Hereby SHARP Electronics Europe GmbH declares that the TV set is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The declaration of conformity may be consulted at http www sharp eu documents of conformit Note Usage of this LCD TV is permitted in Europe This LCD TV is designed for indoor use only CE English 12 Supported File Formats for USB Media Browser Kg Extension Format Cat mpg mpeg Mpeg1 2 ts trp tp m2ts MPEG2 H 264 VC1 AVS MVC vob MPEG2 mkv MPEG1 2 4 H 264 mp4 avi MPEG4 XviD H 264 MPEG2 4 Xvid H 264 fla Tv H 264 Sorenson H 263 3gp MPEG4 H 264 asf wmv VC1 mp3 MPEG1 2 Layer 1 2 3 MP3 Wav LPCM WMA ASF m4a aac WMA WMA Pro AAC HEAAC pcm PCM works only with video files AC3 EAC3 LPCM IMA ADPCM MS ADPCM G711 A mu law Picture Baseline Progressive non interlace
4. TV by two people holding it with two hands one hand on each side of the TV WARNING To prevent the spread of fire keep candles or other open flames away from this product at all times Power Source The TV set should be operated only from a 220 240V AC 50Hz outlet Ensure that you select the correct voltage setting for your convenience Do not place the set a piece of furniture etc on the power cord mains lead or pinch the cord Power Cord Handle the power cord by the plug Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock Never make a knot in the cord or tie it with other cords The power cords should be placed in such a way that they are not likely to be stepped on A damaged power cord can cause fire or give you an electric shock When it is damaged and needs to be replaced it should be done by qualified personnel Lightning In case of storm and lightning or when going on holiday disconnect the power cord from the wall outlet Replacement Parts When replacement parts are required make sure that the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one Unauthorized substitutions may result in fire electrical shock or other hazards Waste Disposal e Packaging and packaging aids are recyclable and should pr
5. connection is now established To disconnect from a network you should highlight Network Type and press OK Information On Menu Items Network Type Network type can be selected as Wired or Wireless device in accordance with the active connection to the TV set Configuration Status This section displays the status of the connection IP Address If an active connection is available the IP address will be displayed on this section If you want to configure IP address preferences press GREEN button and switch to the advanced mode Connecting to your mobile device via WiFi If your mobile device has WiFi feature you can connect it to your TV via a router in order to access the content in your device For this your mobile device must have an appropriate sharing software Connect your mobile device to the router modem and then activate the sharing software on your mobile device Then select files that you want to share with your TV If the connection is established correctly you will be able to access the shared files from your mobile device via the Media Browser of your TV Enter the Media Browser menu and the playback device selection OSD will be displayed Select your mobile device and press the OK button to continue If available you can download a virtual remote controller application from the server of your mobile device application provider You can control the TV via your wireless handheld device using this ap
6. interlace Subtitle Refer to the extended version of this manual on the Sharp web for more details Disclaimers for services using the Internet DISCLAIMERS This SHARP device facilitates the access to content and services provided by third parties The content and services accessible via this device belong to and may be proprietary to third parties Therefore any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of use Unless otherwise specifically authorized by the applicable content or service provider all third party content and services provided are for personal and non commercial use you may not modify copy distribute transmit display perform reproduce upload publish license create derivative works from transfer or sell in any manner or medium any content or services available via this device e SHARP is not responsible nor liable for customer service related issues related to the third party content or services Any questions comments or service related inquiries relating to the third party content or service should be made directly to the applicable content or service provider You may not be able to access content or services from the device for a variety of reasons which may be unr
7. plugging and unplugging USB devices is a very hazardous operation This may cause physical damage to the USB player and the USB device itself Do not pull out the USB module while playing a file Media Browser Menu You can play photo music and video files stored on a USB storage device or on a media server Connect a USB disk to one of the USB inputs located on the side of the TV Or connect your media server to the same network with the TV Press the media browser button ef on the remote or press the MENU button and select Media Browser tab by using Left Right buttons and press OK Main media browser screen will be displayed Select the media type to be listed and press OK If there is more than one media source available a list of devices and servers will be displayed Highlight the device or server from the list and press OK If you press the MENU button while in the Media Browser mode you can access Picture Sound and Settings menu options Pressing the MENU button again will exit from this screen You can set your Media Browser preferences by using the settings menu Changing Image Size Picture Formats Programmes can be watched in different picture formats depending on the transmission received You can change the aspect ratio image size of the TV for viewing the picture in different zoom modes Press ay button repeatedly to change the image size You can shift the screen up or down by using
8. the brown nor the blue wire is connected to the earth terminal in your three pin plug Before replacing the plug cover make sure that e If the new fitted plug contains a fuse its value is the same as that removed from the cut off plug e The cord grip is clamped over the sheath of the mains lead and not simply over the lead wires IF YOU HAVE ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN English Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product To ensure safety and many years of trouble free operation of your product please read Important safety precautions carefully before using this product Important safety precautions e Cleaning Unplug the AC cord from the AC outlet before cleaning the product Use a damp cloth to clean the product Do not use liquid cleaners or aerosol cleaners Use a soft damp cloth to gently wipe the panel when it is dirty To protect the panel do not use a chemical cloth to clean it Chemicals may cause damage or cracks in the cabinet of the TV Water and moisture Do not use the product near water such as bathtub washbasin kitchen sink laundry tub swimming pool and in a wet basement y Do not place vases or any other water filled containers on this product The water may spill onto the product causing fire or electric shock To prevent any fault and unsafe situations please do not place any objects on top of the set If any solid objec
9. FOR USERS IN THE U K The mains lead of this product is fitted with a non rewireable moulded plug incorporating a 5A fuse Should the fuse need to be replaced a BSI or ASTA approved BS 1362 fuse marked 2 or S and of the same rating as above which is also indicated on the pin face of the plug must be used Always refit the fuse cover after replacing the fuse Never use the plug without the fuse cover fitted In the unlikely event of the socket outlet in your home not being compatible with the plug supplied cut off the mains plug and fit an appropriate type DANGER The fuse from the cut off plug should be removed and the cut off plug destroyed immediately and disposed of in a safe manner Under no circumstances should the cut off plug be inserted elsewhere into a 5A socket outlet as a serious electric shock may occur To fit an appropriate plug to the mains lead follow the instructions below IMPORTANT The wires in the mains lead are coloured in accordance with the following code Blue Neutral Brown Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug proceed as follows e The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black e The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red Ensure that neither
10. K to scan for services Unicable If you have multiple receivers and a unicable system select this antenna type Press OK to continue Configure settings by following instructions on the screen Press OK to scan for services DiSEqC switch If you have multiple satellite dishes and a DiSEqC switch select this antenna type After selecting DiSEqC switch another menu screen will be displayed You can set four DiSEqC options if available Press GREEN button to scan all satellites or press YELLOW button to scan only the highlighted satellite To save and exit press OK button Note Do not turn off the TV while initializing first time installation Some options may not be available depending on the country selection Media Playback via USB Input You can connect a 2 5 and 3 5 inch hdd with external power supply external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV IMPORTANT Back up your files before making any connections to the TV The Manufacturer will not be responsible for any file damage or data loss Certain types of USB devices e g MP3 Players or USB hard disk drives memory sticks may not be compatible with this TV The TV supports FAT32 and NTFS disk formatting but recording will not be available with NTFS formatted disks While formatting a USB hard disk that has 1TB Tera Byte or more file capacity you can experience problems with the formatting process Quickly
11. Picture icon and press OK Select 3D Settings and press OK to display settings menu You can use the Q MENU button on the remote for quick acces to 3D Mode and Virtual 3D settings You can use these settings to enable and customize 3D feature of your TV 3D Mode You can customize the 3D mode settings to provide the best viewing experience Select one of these modes to experience 3D image viewing Auto Automatically switches to 3D mode if 3D information is detected from a digital broadcast or a HDMI source Side by Side Displays 3D content which is originally in a form of side by side Top bottom Displays 3D content which is originally in a form of top and bottom Game When playing 1 1 games on your TV each player can enjoy the game with a full screen using this feature To do this the game you want to play has to support dualplay And you need to put on the proper Dual Play glasses sold separately Off 3D function mode is turned off 2D Only If content is 3D but you want to watch it in 2D you can switch to 2D only mode There are 2 options LEFT and RIGHT to select which side of the content you want to watch in 2D Virtual 3D Conversion from 2D to 3D You can adjust the field of depth to various settings or turn it off Left Right Swap You can use this setting to shift the phase of the 3D left right broadcast 3D Depth Sense optional This setting enables the control of 3D depth 3D Viewing Informati
12. SHARP LC42LE 760E LC42LE761E LC42LE 761EN LC42LE 761K LC42LE 62E LC42LE 762EN LCSOLE 760E LCSOLE761E LCSOLE 761EN LC50LE761K LCSOLE 62E LCSOLE 762EN SC te Ke TALIANO i FRAN A S DEUTSCH LCD COLOUR TELEVISION OPERATION MANUAL E ps LCD FARB TV BEDIENUNGSANLEITUNG TELEVISEUR LCD COULEUR MODE D EMPLOI RS TELEVISIONE A COLORI LCD MANUALE DI FUNZIONAMENTO TELEVISOR LCD A COLOR MANUAL DE INSTRUCCIONES i TELEVIS O LCD A CORES MANUAL DE INSTRU ES LCD RENKL TELEV ZYON KULLANIM KILAVUZU SC E USB L oS KA ED Hom Pea C3 gaina 1080p xX DOLBY DIGITAL PLUS CERTIFIED A Miracast Contents Dear SHARP CUSIOMED issnccccsicnidsssnscudiverdonsseannantoneadeaicanivass 2 Important safety precautions nnnnnnneeeeeessssnnnnn nenene 2 LOD EE 3 Package ME 4 TV Control button amp Operation wscccisccccccccssssadecevccssssccesc cnsens 4 Connect Eege 4 Antenna Cable Satellite Conpechon 4 Installing The Batteries Into The Remote nnnanannneeeaanan 4 SMES IMG ON EE 4 To Switch the TV ON ees EEN 4 To Switch the TV to Standby EE 4 To Switchthe TV E E 4 Viewing remote control TV REENEN 5 First Time 1S TAN AUOM E 7 Aerial Installation E 7 Cable TAS tan ANG E 7 Satellite Installation depends on the model 7 Media Playback via USB Input EEN 7 Media Browser Menu REENEN 7 Changing Image Size Picture Fommats 7 Using the Channel List scsscaxeeeesscascancrsius svsdersstassbuactoeeceniadi
13. TRACT TORT NEGLIGENCE BREACH OF WARRANTY STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES English 13 End of life disposal Attention Your product is marked with this symbol It means that used electrical and electronic products should not be mixed with general household waste There is a separate collection system for these products A Information on Disposal for Users private households 1 In the European Union Attention If you want to dispose of this equipment please do not use the ordinary dust bin Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment recovery and recycling of used electrical and electronic equipment Following the implementation by member states private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge In some Countries your local retailer may also take back your old product free of charge if you purchase a similar new one Please contact your local authority for further details If your used electrical or electronic equipment has batteries or accumulators please dispose of these separately beforehand according to local requirements By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatm
14. ation through the mains connection or through other apparatus with a connection to protective earthing and to a television distribution system using coaxial cable may in some circumstances create a fire hazard Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range galvanic isolator see EN 60728 11 The Standby Off On button doesn t separate this device completely from mains Moreover the device consumes power in the standby operation In order to separate the device completely from mains the mains plug has to be pulled from the mains socket Because of that the device should be set up in a way that an unobstructed access to mains socket is guaranteed so that in case of emergency the mains plug can English 3 be pulled immediately To exclude the danger of fire the power cord should principally be separated from the mains socket prior to a longer period of non usage i e during vacations Electrical device not in the hands of children Never let children use any electrical device unsupervised Children cannot always recognise possible dangers Batteries accumulators can be life threatening when swallowed Store batteries out of the reach of small children In case of swallowing a battery medical aid has to be sought immediately Also keep the packaging foils away from children as there i
15. back Record Play Pause Display for PlayListDialog keys could not be used when teletext is ON If a recording starts from timer when teletext is ON teletext is automatically turned off Also teletext usage is disabled when there is ongoing recording or playback Timeshift Recording Press Il PAUSE button while watching a broadcast for switching to timeshifting mode In timeshifting mode the programme is paused and simultaneously recorded to the connected USB disk Press Rb PLAY button again to watch English the paused programme from the stopped moment You will see the timeshift gap between the real and the timeshifted programme in the info bar Press the Ii STOP button to stop timeshift recording and return to the live broadcast Timeshift cannot be used while in radio mode You cannot use the timeshift fast reverse feature before advancing the playback with the fast forward option Instant Recording Press e RECORD button to start recording an event instantly while watching a programme You can press RECORD button on the remote control again to record the next event on the EPG In this case OSD will display the programmed events for recording Press E STOP button to cancel instant recording Switching to a different broadcast or source and viewing Media Browser are not available during the recording Watching Recorded Programmes Press MENU button Highlight Media Browser and press OK Select Reco
16. cording of digital broadcasts To do this a USB stroge device should be connected to the TV The TV should be switched off while connecting the storage device Then switch on the TV to enable recording feature The connected USB device should have at least 1 GB capacity and should have USB 2 0 compatibility Otherwise an error message will be displayed If the writing speed of the connected USB disk is not sufficient recording may fail and timeshifting feature may not be available The files of the recorded programmes will not be available to be played on a computer You can play the recordings only via your TV Lip Sync delay may occur during the timeshifting The TV can record programmes up to ten hours Recorded programmes are split into 4GB partitions Recordings of HD programmes can occupy bigger size on the USB disk depending on the broadcast s resolution For this reason it is recommended to use USB hard disk drives for recording HD programmes Do not plug out the USB HDD during the recording This may harm the connected USB HDD Multipartiton support is available Maximum two different partitions are supported If the disk have more than two partitions crash may occur First partition of the usb disk is used for PVR ready features It also must be formatted as primary partition to be used for PVR ready features Some stream packets may not be recorded because of signal problems so sometimes video may freezes during play
17. ct to a server on the Internet and view the content provided by this server over your Internet connection Portal feature allows you to view the music video clip or web content with defined shortcuts Whether you can view this content without interruption depends on the connection speed provided by your internet service provider Press D button on the remote to open internet portal page You will see icons of the available applications and services on the portal screen Use the navigaiton buttons on your remote to select the desired one You may view the desired content by pressing OK after selecting Press BACK RETURN button to return back to the previous screen or EXIT to quit internet portal mode Note Possible application dependent problems may be caused by the content service provider Open Browser Open Browser function is one of the applications on the portal that provides access to internet Select the internet browser logo on the portal page and press OK to launch the browser Logos of certain predefined websites will be displayed You can select one of them for quick access or enter the URL address of a website in the address bar on the top of the screen To perform searches on the internet enter a keyword in the adress dialog box and move the cursor to search icon using the navigation buttons on the remote and press OK Netflix Netflix is a provider of on demand internet streaming media Press the NETFLIX button on the remot
18. e to launch the application HBBTV System HbbTV Hybrid Broadcast Broadband TV is a standard that seamlessly combines TV services delivered via broadcast with services delivered via broadband and also enables access to Internet only services for consumers using connected TV s and set top boxes Services delivered through HbbTV include traditional broadcast TV channels catch up services video on demand EPG interactive advertising personalisation voting games social networking and other multimedia applications HbbTV applications are available on channels where they are signalled by the broadcaster The applications are generally launched with a small red button icon to notify the user that there is an HbbTV application on that channel The user then should press the red button to open the application page To close the application pressing the red button again It should be noted that the operation and control of the applications may differ depending on the application Note You can enable or disable this feature from the Other Settings menu in Settings menu This feature is not availlable for UK models Using the 3D Mode This product supports the viewing of 3D content from devices such as a High Definition Satellite Receiver or Blu ray Player via HDMI PC YPBPR USB inputs or via an available broadcast You need to wear the supplied 3D Glasses to watch contents in 3D Precautions For your safety Read these sa
19. elated to the device itself including but not limited to power failure other Internet connection or failure to configure your device properly SHARP its directors officers employees agents contractors and affiliates shall not be liable to you or any third party with respect to such failures or maintenance outages regardless of cause or whether or not it could have been avoided ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU ON AN AS IS AND AS AVAILABLE BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY OR REPRESENTATION OF ANY KIND TO YOU EITHER EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY NON INFRINGEMENT FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTIES OF SUITABILITY AVAILABILITY ACCURACY COMPLETENESS SECURITY TITLE USEFULNESS LACK OF NEGLIGENCE OR ERROR FREE OR UNINTERRUPTED OPERATION OR USE OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR EXPECTATIONS SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF THIRD PARTY CONTENT OR SERVICE PROVIDERS NOR ANY ASPECT OF THE CONTENT OR SERVICE RELATED TO SUCH THIRD PARTY PROVIDERS IN NO EVENT WILL SHARP AND OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT INDIRECT SPECIAL INCIDENTAL PUNITIVE CONSEQUENTIAL OR OTHER DAMAGES WHETHER THE THEORY OF LIABILITY IS BASED ON CON
20. ent recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling 2 In other Countries outside the EU If you wish to discard this product please contact your local authorities and ask for the correct method of disposal For Switzerland Used electrical or electronic equipment can be returned free of charge to the dealer even if you don t purchase a new product Further collection facilities are listed on the homepage of www swico ch or www sens ch B Information on Disposal for Business Users 1 In the European Union If the product is used for business purposes and you want to discard it Please contact your SHARP dealer who will inform you about the take back of the product You might be charged for the costs arising from take back and recycling Small products and small amounts might be taken back by your local collection facilities For Spain Please contact the established collection system or your local authority for take back of your used products 2 In other Countries outside the EU If you wish to discard of this product please contact your local authorities and ask for the correct method of disposal The battery supplied with this product contains traces of Lead For EU The crossed out wheeled bin implies that used batteries should not be put to the general household waste There is a separate collection s
21. ete 7 Quick WOM E 8 WRIST ON EE 8 Electronic Programme Guide EPG ss sssonnnninssesessneeeen 8 Recording a Programme EE 8 Timeshift RREGOP G cies sriccssaviniinncsanaamansonkisesuantnamhaasdnbetacintian 8 Instant FSC ONG ET 8 Watching Recorded Programmes ccccccssssseeeeeseeeseees 8 Recording Beeler EE 8 Connectivity Functions E 8 Connecting IVioaomehNehwork 8 Configuring Network Get nge AAR 9 Information On Menu Irems 9 Connecting to your mobile device via WIFi 9 Using BEE 9 Using DLNA Network Gernvice EEN 9 Internet E EE 10 Open Se TEE 10 lt E 10 HBBTV SYS D 10 Using the 3D Bel 10 eege 10 Operating the SD MOC i cccccosec csasssacnzevecscedbsstesaacecesdends 11 Horizontal Viewing Angle ANEN 11 Vertical Viewing Angle AEN 11 leede 12 Licence NOUN CATIONS E 12 EC Declaration of Conformity E 12 Supported File Formats for USB Media Browser 13 Disclaimers for services using the Intemet 13 End of life disposal gc osctee as ccetepicnse thy sicccccexencecuicdasetuasseenaesd 14 IMPORTANT NOTICE This guide is just a summary of the full instruction book For more detailed explanations please refer to the full instruction book which can be found at http www sharp eu go to Service gt Service amp Downloads and click on your country flag We strongly recommend that you read the full manual to take more advantage of all the functionality of this TV English 1 SPECIAL NOTE
22. fety precautions carefully before using the 3D function e You may experience discomfort headaches or dizziness while watching 3D images If you experience such symptoms you should remove 3D glasses and stop watching 3D mode Do not watch in 3D mode for long periods of time Allow yourself occasional rests During viewing if you experience any discomforts such as eye strain headache or nausea take off the 3D glasses and stop watching in 3D mode Consult a doctor if the discomforts persist It is recommended that an adult should check on children including teenagers because they may be more sensitive to the effects of watching 3D If they experience similar discomforts mentioned above have them stop watching in 3D immediately Do not use the 3D Glasses as sunglasses or general eyeglasses Do not move around while watching in 3D and wearing the glasses as your vision is modified and you may run into objects which may result in injuries Use only the supplied 3D glasses If you experience screen flickering when watching 3D images in poor light conditions you should turn the lamp off or dim the light While wearing headphones do not adjust the volume to excessive levels as this may result in temporary or permanent hearing loss A CAUTION 3D Images e Read these safety instructions carefully to prevent damage and ensure your personal safety e Consult an optometrist if you experience any diffictulties while watching in 3D wi
23. gs and press OK Highlight Media Renderer and set as Enabled Connect to a Wired or Wireless Network See the previous chapters for detailed information Play Shared Files via Media Browser Select Media Browser from the main menu and press OK The Media browser will then be displayed DLNA support is only available in Folder mode To enable folder mode select to the Settings tab in the main media browser menu and press OK Highlight View Style and set as to Folder Press the BACK button to go to upper menu Select the desired media type and press OK English 9 If sharing configurations are set properly the device selection OSD will be displayed after selecting the desired media type Select media server or network that you want to connect and press OK Subtitle files do not work if you watch videos from your network through DLNA You can connect only one television with DLNA to the same network If a problem occurs with the DLNA network please switch your television off at the wall socket and back on again Trick mode and jump are not supported with the DLNA function There may be some PC s which may not be able to utilize the DLNA function due to administrator and security settings such as business PC s SHARP corporation bears no responsibility regarding the content and quality of the content provided by the content serve provider Internet Portal Portal feature adds your TV a feature that allows you to conne
24. incipally be recycled Packaging materials such as a foil bag should be kept away from children Batteries including those which are heavy metal free should not be disposed of with household waste Please dispose of used batteries in an environmentally friendly manner Find out about the legal regulations which apply in your area Do not try to recharge batteries there is a danger of explosion Replace batteries only with the same or equivalent type Batteries should not be exposed to excessive heat such as sunshine fire or the like This symbol on the product or on its packaging means that your electrical and electronic device should be disposed at the end of its service life separately from your household wastes There are separate collection systems for recycling in the EU For more information please contact the local authority or the dealer where you purchased the product Disconnecting the Device The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable Installation To prevent injury this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall if the option is available Warning Do not leave your TV in standby or operating mode when you leave your house Connection to a Television Distribution System Cable TV etc from Tuner Device connected to the protective earthing of the building install
25. ny previous history In such a case if you experience any of the following symptoms immediately stop watching the 3D TV and consult a doctor altered vision visual or facial instability such as eye or muscle twitching dizziness or light headedness visual transition or unconscious action convulsion loss of conscience confusion or disorientation loss of directional sense cramps or nausea You can reduce the risk of photosensitization seizure by taking the following actions While watching the 3D TV do take frequent breaks If you have vision that is different in each eye you should watch the TV after taking vision correction measures Some viewers may feel disoriented afler watching 3D Therefore after you watch 3D take a moment to regain awareness of your surrounding before moving You must look straight ahead and the TV must be at eye level while wearing the 3D glasses The picture may not be visible or may look dark if you do not stay within the viewing angle Operating the 3D Mode e You can enjoy viewing 3D images on your TV by wearing the supplied 3D Glasses Note that this TV s 3D feature works only with its specific 3D glasses e Press the SOURCE Seance K button and select the connected input e You should select suitable 3D Mode before viewing e To view 3D contents or programmes in 3D mode you must wear the supplied 3D Glasses 3D Settings Press the MENU button on the remote and select the
26. o the panel width or wider in DTV Supported only when the image s height is between 1700 and 1900 and the image s width is equal to 1280 or 720 Not supported if the image provides 1080i resolution Specifications TV BROADCASTING PAL B G WU D K SECAM LIL D K DIGITAL RECEPTION FULLY INTEGRATED DIGITAL TERRESTRIAL CABLE TV DVB T C DVB T2 COMPLIANCE AND DVB S S2 SUPPORT IS DEPENDING ON THE MODEL RECEIVING CHANNELS VHF BAND I II UHF BAND U HYPERBAND NUMBER OF PRESET CHANNELS 1000 10 000 if satellite is supported CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm unbalanced OPERATING VOLTAGE 220 240V AC 50 Hz AUDIO German Nicam Stereo OPERATION TEMPERATURE AND OPERATION HUMIDITY 0 C up to 40 C 85 humidity max PANEL 16 9 Licence Notifications Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories All other company or product names are trademarks or registered trademarks of their respective companies Netflix and the Netflix logo are the registered trademarks of Netflix Inc The Wi Fi CERTIFIED Logo is a certification mark of the Wi Fi Alliance The Wi Fi Protected Setup Mark is a mark of the Wi Fi Alliance Wi Fi CERTIFIED Miracast and Miracast are trademarks of Wi Fi Alliance DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living
27. ode 18 Subtitle on off Subtitle in media browser mode 19 Image size 20 Teletext Mix 21 Media Browser 22 Electronic programme guide 23 Exit 24 Navigation buttons 25 Quick menu On Off 26 Info Reveal in TXT mode 27 Programme up down 28 Mute 29 Previous programme 30 Numeric buttons 31 AV Source Note The Remote Control range is approximately 7m 23ft Using My button 1 This button s main function is to run YouTube link However if you want to change this function you can press MY BUTTON 1 for five seconds when on a desired source channel or link until the MY BUTTON IS SET message is displayed on the screen This confirms that the selected MY BUTTON is now associated with the selected function Note that if you perform first time installation MY BUTTON 1 will return to its default function Using My Button 2 Press MY BUTTON 2 for five seconds when on a desired source channel or link until the MY BUTTON IS SET message is displayed on the screen This confirms that the selected MY BUTTON is now associated with the selected function English 5 b T WR E 4 9 v neg A _ 6 MIE T Pa Viewing the Connections Gebake Gbbk ek Scart Connection back VGA Connection back PC YPbPr Audio Connection back HDMI
28. on Refer to the size distance guidelines below to experience 3D in the best possible way Viewing Distance Size inch 42 Viewing distance m 1 5 Horizontal Viewing Angle 45 45 Vertical Viewing Angle It is strongly recommended that the TV is placed at a height as same as the eye level of the viewer In case that is not possible tilt the TV accordingly in its stand or wall mount English 11 3D Viewing Information continued MBP DTV OTHER 1080p 24 FP Supported Not Supported Not Supported Not Supported Not Supported 720p 50 FP Supported Not Supported Not Supported Not Supported Not Supported 720p 60 FP Supported Not Supported Not Supported Not Supported Not Supported 1080p FC SBS TB SBS TB SBS TB SBS TB SBS TB 720p FC SBS TB SBS TB SBS TB SBS TB SBS TB 1080i FC SBS SBS SBS SBS SBS OTHER Not Supported Not Supported Please note that if you apply 720p FC TB input the picture will be scaled smaller than the original size in the middle of the screen SBS Side By Side TB Top Bottom MBP Media Browser Picture MBV Media Browser Video FC Frame Compatible FP Frame Pack in MBP Supported only when the image s height is multiples of 2 and the image s width is multiples of 16 and if the image width is equal t
29. or N buttons while in 14 9 Zoom Cinema or Subtitle Using the Channel List The TV sorts all stored stations in the channel list You can edit this channel list set favourites or set active stations to be listed by using the Channel List menu options Press MENU button to view main menu Select Channel List item by using Left or Right button Press OK to view menu contents Select Edit Channel List to manage all stored channels Use Up or Down and OK buttons to select Edit Channel List Press Up or Down button to select the channel that will be processed Press Left or Right button to select a function Use P P buttons to move page up or down Press MENU button to exit English 7 Quick Menu Quick Settings menu allows you to access some options quickly Press Q MENU button on the remote control to view quick menu This menu content may differ depending on the model of your TV Teletext Teletext Mix Activates video text mode when pressed once if available in your broadcast Press again to view analogue teletext page Press again to place the teletext screen over the programme mix Pressing again will quit the teletext mode Electronic Programme Guide EPG Some but not all channels send information about the current and next programmes Press the Cis button to view the EPG menu You can Record or Set Timer after you have selected a programme in EPG menu Recording a Programme Your TV supports re
30. ote the correct polarity or Do not mix old and new batteries Replace only with same or equivalent type e Place the cover back on Switching On Off To Switch the TV On Connect the power cord to the mains socket Switch the button on the TV to position so the TV will switch to standby mode Then the standby LED lights up To switch on the TV from standby mode either I e Press the a button P P or a numeric button on the remote control e Press the vn or P CH button on the TV The TV will then switch on To Switch the TV to Standby I To switch the TV to low power standby press the QO button on the remote control or on the TV To Switch the TV Off Switch the Rn button on bottom of the TV to position 2 as illustrated to isolate the TV from the mains the LED will go out 4 Viewing remote control TV Standby On Channel list Volume up down Menu on off OK Confirm Return Back Internet Portal My button 1 YouTube a RC4847 My button 2 b RC4848 Press this button to launch the Netflix application 10 Coloured buttons Red Green Yellow Blue 11 Mono Stereo Dual I II Current language ors Sg 28 ds Ser YS 12 Fast rewind in media browser mode 13 Pause in media browser mode Timeshift recording 14 Programme recording 15 Play in media browser mode 16 Stop in media browser mode 17 Fast forward in media browser m
31. plication To do this enable the Virtual Remote feature from the Settings Other Settings menu by pressing Left or Right button Connect the TV and the mobile device to the same network and start the application Note This feature may not be supported on all mobile devices Using MIRACAST When you connect a device such as a Miracast compatible smartphone or tablet to this TV you can enjoy video and audio from the device on the TV s large screen and speakers 1 Switch the TV source to Screen Mirroring 2 Enable the Miracast function on the Miracast supported device and connect to the TV The TV changes according to the behavior of the device Note This feature can be used only if the mobile device supports Miracast Scanning and connecting processes differ according to the programme you use Android based mobile devices should have the software version V4 1 2 and above Using DLNA Network Service The DLNA standard allows you to view and play photos music and videos stored in a DLNA compliant media server connected to your home network Install Nero Media Home software for PC s or laptops or appropriate sharing software for other devices The DLNA function cannot be used if the server programme is not installed onto your PC Prepare your PC with the provided Nero Media Home programme Install the propriate application onto your mobile device Enable Media Renderer feature Press MENU button Select Settin
32. r digital terrestrial TV broadcasts After all the available stations are stored the Channel List will be displayed on the screen While the search continues a message will appear asking whether you want to sort channels according to the LCN Select Yes and press OK to confirm LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence if available Press MENU button to quit channel list and watch TV Cable Installation If you select Cable option and press OK button on the remote control a confirmation screen will be displayed Select YES and press OK to proceed To cancel operation select NO and press OK You can select frequency ranges from this screen Enter the frequency range manually by using the numeric buttons When finished press OK button to start automatic search Note Searching duration will change depending on the selected search step Satellite Installation depends on the model If you select Satellite option from the search type selection screen you can set a satellite and watch satellite channels When you select Satellite installation Antenna Type menu will be displayed You can select Antenna type as Direct Unicable or DiSEqC switch Direct If you have a single receiver and a direct satellite dish select this antenna type After selecting Direct another menu screen will be displayed Select an available satellite and press O
33. rdings Library item and press OK Recordings Library screen will be displayed Select a recorded item from the list if previously recorded and press OK to view Play Options Press B STOP button to stop a playback and return to Recordings Library Recording Configuration Select Recording Configuration item in the Settings menu to configure recording settings Format Disk You can use Format Disk feature for formatting the connected USB disk IMPORTANT Note that ALL the data stored on the USB disk will be lost and then the disk format will be converted to FAT32 if you activate this feature If your USB disk malfunctions you can try formatting the USB disk In most cases formatting the USB disk will restore normal operation however ALL the data stored on the USB disk will be lost in such a case Connectivity Functions Connecting TV to a Home Network Connectivity feature allows the TV to connect to the home network wired or wirelessly You can use this networking system to connect to the Internet Portal or to access photo video and audio files that are stored on a media server connected to the network and play display them on the TV Wired connection Connect the TV to the modem router via a LAN cable not supplied Select Network Type as Wired Device in Network Settings menu and press OK to connect Lm amp A Broadband ISP connection 8 Wireless connection To connect the TV to the home network wireles
34. s danger of suffocation Package Contents Batteries 2 X AAA 1 X Video amp Audio Connection Quick Guide Cable 3D Glasses Nero media home CD Remote Control Note You should check the accessories after purchasing Make sure that each accessory is included As the manufacturer s specification supports communication on cable lengths shall be smaller than 3m TV Control button amp Operation qe DQ o O ee xt Standby On button TV AV button Programme Up Down buttons ee Volume Up Down buttons Wi switch is used for turning the TV on or off The position of the control buttons and power switch may differ depending on the model English Connect Power IMPORTANT The TV set is designed to operate on 220 240V AC 50 Hz socket After unpacking allow the TV set to reach the ambient room temperature before you connect the set to the mains Plug the power cable to the mains socket outlet Antenna Cable Satellite Connection Connect the aerial or cable TV plug to the AERIAL INPUT ANT or satellite lead to the SATELLITE INPUT LNB located on the rear side of the TV Rear side of the TV J Y e AERIAL Note Satellite support is depending on the model SATELLITE Installing The Batteries Into The Remote e Remove the back cover to reveal the battery compartment e Insert two size AAA batteries N
35. s product is made of glass Therefore it can break when the product is dropped or impact applied If the LCD panel is broken be careful not to be injured by broken glass Heat sources Keep the product away from heat sources such as radiators heaters stoves and other heat generating products including amplifiers 29 e To prevent fire never place any type of candle or naked flames on the top or near the TV set e To prevent fire or shock hazard do not place the AC cord under the TV set or other heavy items Headphones Do not set the volume at a high level Hearing experts advise against extended listening at high volume levels Do not display a still picture for a long time as this could Cause an afterimage to remain There is power consumption always if main plug is connected e A Servicing Do not attempt to service the product yourself Removing covers can expose you to high voltage and other dangerous conditions Request a qualified person to perform servicing LCD Screen The LCD panel is a very high technology product giving you fine picture details Due to the very large number of pixels occasionally a few non active pixels may appear on the screen as a fixed point of blue green or red This is within product specifications and does not constitute a fault Precautions when transporting the TV When transporting the TV never carry it by holding onto the speakers Be sure to always carry the
36. sly just select Network Type as Wireless Device in Network Settings menu and press OK button The TV will search for available networks Select the desired network and press OK The TV has a built in WLAN system and has no need for additional devices to connect to a wireless network connection e Broadband K A ISP TV Built In WLAN system About Using Connectivity Feature PC HDD Media Player or any other devices that are DLNA 1 5 compatible should be used with wired connection for higher playback quality Install Nero Media Home software supplied to your PC to use it as a media server While using the wireless connection type consider that the TV cannot connect to the networks with hidden SSID Configuring Network Settings Your TV s network settings include wired and wireless connection options If you are connecting the TV via ethernet input select Network Type as Wired Device Select Wireless Device option if you are going to connect the TV to your network wirelessly After selecting Network Type press OK to connect You can press YELLOW button to scan available networks for wireless connection Afterwards a list of networks will be displayed Select your network from the list and press OK If the selected network is protected with a password key in the correct code You can also use virtual keyboard to enter the password Wait until the IP the address is shown on the screen This means that the
37. t or liquid falls into the cabinet unplug the TV and have it checked by qualified personnel before operating it any further Stand Do not place the product on an unstable cart stand tripod or table Doing so can cause the product to fall resulting in serious personal injuries as well as damage to the product Use only a cart stand tripod bracket or table recommended by the manufacturer or sold with the product When mounting the product on a wall be sure to follow the manufacturer s instructions Use only the mounting hardware recommended by the manufacturer When relocating the product placed on a cart it must be moved with utmost care Sudden stops excessive force and uneven floor surface can cause the product to fall from the cart Ventilation The vents and other openings in the cabinet are designed for ventilation Do not cover or block these vents and openings since insufficient ventilation can cause overheating and or shorten the life of the product For ventilation leave a free space of at least 10 cm all around the set Do not place the product on a bed sofa rug or other similar surface since they can block ventilation openings This product is not designed for built in installation do not place the product in an enclosed place such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions are followed Use this device in moderate climates The LCD panel used in thi
38. th your 3D glasses The following people should not use the 3D Mode e Pregnant women seniors people with heart conditions as well as people who can get easily nauseous e When watching in 3D be aware of your surroundings Do not watch in an environment with breakable objects nearby e Do not apply spray cleaners directly onto the surface of the 3D Glasses This may result in discoloration and cracks and may cause the screen display to peel off e Make sure the cleaning cloth is soft and does not contain any foreign material or dust Using a dirty cloth will damage English 10 your 3D glasses e Do not drop or bend the 3D glasses e If the receiving range is out of the specified range the screen may not be viewable as 3D video A Health Warning 3D Images e When watching 3D images you should leave a distance of at least twice the screen width between you and the screen and you should keep the screen at eye level e Please prevent children under the age of 5 from watching 3D It may affect their vision development Photosensitive Seizure Warning e If you or a member of your family has a history of epilepsy or seizure please consult with your doctor before watching 3D TV It is possible that some viewers may experience a seizure or epilepsy when exposed to certain conditions including flashing lights or images in TV or video games Sometimes certain symptoms can occur in unspecified conditions even if you do not have a
39. ystem for used batteries to allow proper treatment and recycling in accordance with legislation Please contact your local authority for details on the collection and recycling schemes For Switzerland The used battery is to be returned to the selling point For other non EU countries Please contact your local authority for correct method of disposal of the used battery English 14 PIN SHARP SHARP CORPORATION 22 22 Nagaike cho Abeno ku Osaka 545 8522 Japan In Europe represented by Sharp Electronics Europe Ltd 4 Furzeground Way Stockley Park Uxbridge Middlesex UB11 1EZ U K http www sharp eu 50277046
Download Pdf Manuals
Related Search