Pro-Ject 1Xpression Carbon
Contents
1. red right channel pos R green right channel return R blue left channel return L The full sound quality of the record player can only be achieved if the cartridge is correctly adjusted Particular tools like the PRO JECT alignment tool are required to accomplish this job properly If you are not well acquainted with the adjustment of cartridges you are advised to call upon the willing help of your PRO JECT dealer to accomplish this task for you Please note adjusting a cartridge and tonearm calls for the greatest care in order to avoid damaging the cartridge or tonearm bearings Leave this work to your dealer if you are in any way unsure of the necessary steps and precautions to be taken Useful tips The lid is not only a dust cover but also a resonant structure likely to be excited by and to pass into the plinth the acoustic energy emanating from your loudspeakers during replay It is therefore recommended that the lid be removed for optimum sound quality The record player should be positioned on a low resonance surface such as wood or multiple layer ply board to avoid structural vibrations disturbing replay 6 Pro Ject Audio Systems Pro Ject 1 Xpression Carbon Ortofon 2M RED Revision 2014 02 25 Technical specifications PRO JECT 1 Xpression Carbon Pro Ject 8 6cc EVO Nominal speeds Speed variance Wow and flutter Signal to noise Effective tonearm mass Effective tonearm length Overhang Power consumptio2. Project INSTRUCTIONS FOR USE Pro Ject 1 X ression Carbon 2 Pro Ject Audio Systems Pro Ject 1 Xpression Carbon Ortofon 2M RED Revision 2014 02 25 Pro Ject 1 Xpression Carbon Controls features and connections N OD WM BR UNBE 8 18 10 11 12 13 14 15 16 17 20 21 22 23 Motor brackets with ORTOFON pads Stepped drive pulley Drive belt 3a Hook Hub Platter Tonearm counterweight 6a Downforce scale Tonearm lift lever Tonearm rest and removable transport lock Tonearm tube 9a Tonearm base Lid Lid hinges Hinge fasteners Power supply socket Phono output sockets and earth connection Anti skating weight adjustment scale Anti skating weight Anti skating weight support hoop Power switch Headshell with finger lift and optional fitted cartridge Ortofon 2M Red Motor Adjustable tip toe feet with anti scratch cups Connection cable not shown Power supply not shown Universal adapter not shown Dear music lover thank you for purchasing a PRO JECT AUDIO record player In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully Y Warning of a hazard for the user the unit or possible misuse ney Important notice The record player is supplied with a factory fitted and adjusted cartridge as an option The following instructions for adjusting the cartri
3. over the larger diameter part of the motor pulley 2 Refit the platter To revert to 33 r p m repeat the proceedings using the smaller step on the pulley In addition 78 r p m is available after fitting a special pulley which may be purchased as an nes optional extra For detailed product information please refer to the Pro Ject web site www project audio com Maintenance and cleaning Your record player requires little or no regular maintenance Remove dust with a slightly moistened antistatic cloth Never use a dry cloth because this will create static electricity which attract more dust Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid damage to rubber parts It is recommended to fit the needle cover before cleaning or maintenance is carried out to avoid damage If the player is not used over a long period of time the drive belt can be removed to prevent unequal stretching y Always disconnect the record player from the mains power supply as a precaution before maintenance Fitting and connecting the cartridge All cartridges with half inch mounting holes can be fitted Leaving the needle s protection cover on fit the cartridge to the headshell using the screws supplied with the cartridge by passing one screw through each slot in the headshell 21 Do not tighten the nuts yet Connect the tonearm wires to the cartridge pins as follows white left channel positive L
4. from that to the phono box or between that and the amplifier This could be due to a faulty plug broken wire or solder joint or simply loose plug socket connection Phono input not selected at amplifier Amplifier not switched on Amplifier or speakers defective or muted No connection to the loudspeakers Strong hum on phono input No earth connection from cartridge or arm or arm cable to amplifier or earth loop Distorted or inconsistent sound from one or both channels Record player is connected to wrong input of amplifier or MM MC switch incorrectly set Needle or cantilever damaged Wrong r p m drive belt overstretched or dirty platter bearing without oil dirty or damaged Service Should you encounter a problem which you are not able to alleviate or identify despite the above information please contact your dealer for further advice Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country Guarantee repairs will only be effected if the unit is returned correctly packaged For this reason we recommend keeping the original packaging Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according to the diagrams on the last page of this user guide Please remove these parts and pack them separately lid 10 counterweight 6 anti skating weight 16 platter 5 and belt 3 Fit the cartrid
5. dge are provided in case the cartridge is replaced by a different model at a later date During assembly and adjustment of the deck small parts could be lost if not carefully placed in a suitable receptacle Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered in the technical drawings above Separately packed items are marked with an asterisk Pro Ject Audio Systems Pro Ject 1 Xpression Carbon Ortofon 2M RED Revision 2014 02 25 Set up The deck is supplied partially disassembled and carefully packaged for safe transport Carefully remove all parts from the transport packaging Make sure the surface you wish to use the turntable on is level use a spirit level before placing the turntable on it Fit the drive belt 3 around the hub 4 and the smaller diameter part of the motor pulley 2 Avoid getting sweat or grease on the belt as these will deteriorate the performance and reduce the belt s lifespan Use absorbent kitchen paper to remove any oil or grease from the outer edge of the hub and the belt Fit the platter over the spindle of the hub Level the plinth using a spirit level and the adjustable feet 23 Remove the transport lock 18 from the tonearm Store it in the original packaging so it is available for any future transportation vw We recommend to use the record player without a mat on the platter Cartridge downforce adjustment The counterweight 6 su
6. ed with the needle still in the record groove Irreparable damage may be caused to the cantilever suspension The arm must be lifted to make each adjustment and lowered afterwards to check it Anti skating force adjustment The anti skating force must be adjusted corresponding to the downforce as follows i 3 2 O Downforce Groove in the stub 15 10 14mN 1 from bearing rings 15 19mN ae e 15 20mN and bigger WEN i Hang the loop of the thread of the anti skating weight in the groove of the anti skating stub 15 corresponding to the downforce applied to your cartridge and feed the thread through the loop of the wire support 17 Connection to the amplifier The record player has gold plated female RCA phono sockets 14 so you can substitute the interconnect cables supplied with higher quality cables such as the Pro Ject Connect it interconnect cables for connection to the amplifier if you wish Use the Phono input sometimes labelled gram disc or RIAA on your amplifier Make sure that the phono input offers correct matching and amplification for the type of cartridge used Line inputs such as CD Tuner Tape or Video are not suitable Take care to connect the left and right channels correctly The right channel is usually marked red the left channel black or white Check the manual supplied with your amplifier for relevant information The earthing wire of the tonearm lead should be connected to the earth t
7. erminal on your amplifier if provided If your amplifier does not have an input suitable for phono cartridges you will require a separate phono amplifier stage for MM or MC cartridges which is then connected between the record player and a free line level input of the amplifier For detailed product information regarding Pro Ject Audio interconnect cables and phono amplifiers please refer to the Pro Ject web site www project audio com E The recommended load impedance for the factory fitted cartridge is 47kohms MM input Mains power connection The turntable is supplied with the universal power supply with 3 exchangeable sockets adapters suitable for all countries Select the correct adapter for your country and insert the adapter to the exchangeable part of the power supply Connect the low voltage plug from the power supply to the socket 13 on the rear of the record player before connecting the power supply to the mains Fitting the lid Fit the lid dust cover 10 carefully over the hinge prongs 11 and adjust the screws 12 until the lid stays open where you want it to without being too stiff to open or close Switching on and off Pressing the power switch 20 alternately starts or stops the motor Pro Ject Audio Systems Pro Ject 1 Xpression Carbon Ortofon 2M RED Revision 2014 02 25 5 Changing replay speed To play records at 45 r p m first remove the platter 5 Using the accessory tool provided 3a hook the belt 3
8. ge protection cap Insert the transport lock for the tonearm 18 prior to carefully packaging the record player Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these ES instructions for use and or by transportation without the original packaging Modification or change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer PRO JECT is a Registered Trademark of H The information was correct at the time of going Lichtenegger to press The manufacturer reserves the right to make changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development This guide was produced by Pro Ject Audio Systems Copyright 2013 All rights reserved 8 Pro Ject Audio Systems Pro Ject 1 Xpression Carbon Ortofon 2M RED Revision 2014 02 25 Accessories Instruction for use LA Pro Ject Audio Systems Pro Ject 1 Xpression Carbon Ortofon 2M RED Revision 2014 02 25 9
9. n Outboard power supply Dimensions W x H x D Weight 33 45 r p m 78 r p m optional 33 0 2 45 0 18 33 0 14 45 0 13 68dB 6g 8 6 218 5mm 18 5mm AW OW standby mode 15V 0 0 8mA DC set at 0 5mA universal power supply 415 x 130 x 335mm dust cover open 415 x 400 x 400mm 5 5kg Technical specifications MM Cartridge Ortofon 2M RED Frequency range Channel separation Output voltage Recommended load impedance Compliance stylus type Recommended tracking force Weight Pro Ject Audio Systems Pro Ject 1 Xpression Carbon Ortofon 2M RED Revision 2014 02 25 20 22 000Hz 22dB 1kHz 5 5mV 47kohms amplifier connection MM input 20um mN elliptical 18mN 7 29 7 Potential incorrect use and fault conditions Pro Ject turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances Therefore the following list of common fault symptoms is included The platter doesn t turn although the unit is switched on The unit is not connected to the mains power supply No mains at the socket Drive belt is not fitted or has slipped off No signal through one or other channel or both channels No signal contact from the cartridge to the internal tonearm wiring or from that to the arm lead or
10. pplied is suitable for cartridges weighing between 6 8g counterweight no 48 Alternative counter weights for cartridges weighing between 4 6g counterweight no 49 8 10g counterweight no 28 9 12g counterweight no 30 are available as accessory part Adjust the downforce prior to installing the anti skating weight Pushing carefully turn the counterweight 6 onto the rear end of the tonearm tube 9 so that the downforce scale 6a shows towards the front of the player Lower the armlift and position the cartridge in the space between arm rest and platter Carefully rotate the counterweight 6 until the armtube balances out The arm should return to the balanced position if it is moved up or down This adjustment must be done carefully Do not forget to remove the cartridge protection cap if fitted Once the arm is correctly balanced return it to the rest Hold the counterweight 6 without moving it and gently revolve the downforce scale ring 6a until the zero is in line with the anti skating prong 15 Check whether the arm still balances out Rotate the counterweight counter clockwise seen from the front to adjust the downforce according to the cartridge manufacturer s recommendations One mark on the scale represents 1 mN 0 1g 0 1 Pond of downforce ES The recommended downforce for the factory fitted cartridge is 1 amp mN Adjusting the vertical tracking angle vta Put a record and the record weight on the pla
11. tter When the needle is lowered into the record groove and the tonearm is not resting on the lift arm the tube of the tonearm should be parallel to the surface of the record If it is not loosen hexagon screw in the tonearm base just enough to allow vertical movement of the arm pillar without force and slide the arm up or down until it is parallel Carefully retighten the hexagon screw without applying excessive force which would deform the arm pillar finger tight is quite sufficient Adjusting the azimuth The cartridge needle must be vertical in the record groove in order to trace the groove wall modulations correctly AZIMUTH A small screw at the bearing end of the arm allows incorrect azimuth to be corrected if your needle is not mounted exactly perpendicular to the cartridge body which is often the case Slacken off the screw just enough to be able to revolve the arm tube without applying force Please note do not remove the screw completely VTA 4 Pro Ject Audio Systems Pro Ject 1 Xpression Carbon Ortofon 2M RED Revision 2014 02 25 With the aid of a good magnifying glass adjust the needle until it is vertical in the groove i e perpendicular to the record s surface Ideally this should correspond to the top surface of the cartridge body being parallel to the record surface When you are satisfied that the needle is vertical retighten the screw carefully Under no circumstances should the arm tube be adjust
Download Pdf Manuals
Related Search