Elite Screens ZS-R106WHA projection screen
Contents
1. Electric Motorized Projection Screen VMAX 2 Series User s Guide Rev 010312 AS www elitescreens com info elitescreens com Important Safety amp Warning Precautions Make sure to read this user s guide and follow the procedure below Caution The screen s Black Top Drop is already set to its maximum drop distance There is NO extra Black Top Drop in the roller Please be aware of this as it will void your warranty with Elite Screens Unapproved changes or modifications except for cutting the power cord for hardwire installations to this unit are prohibited and will void your warranty For more information please contact our Technical Support Department at 877 511 1211 Ext 604 e Please retain this user s guide for future reference To avoid damaging the unit do not use with any unauthorized accessories not recommended by the manufacturer e Handle the unit carefully during transportation to avoid any damages e To ensure safe and reliable operation direct connection to a properly grounded power source is advised e The power outlet supplying power to the unit should be close to the unit and easily accessible Do not install the unit on uneven or inclined surfaces Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle e Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short circuit e There are not user se2. bianca Maxed y E 3 Maeda hae 10 haces 0 E bias dei o Mias TOY E 24 ed a a fore Ope fst ae fu pu fo ur foe ff fro fod fod fu fu uo pee ed cd Pe fod AE e OS re DD 2 5 fied fi fad id ied i Liira Liira Liira Liira Liira Liri Lir yoyo m mm Pm Liani Pom Diisi Liani Liani Pm LEES Lissi Linni Liani Litai Lias mijo m po TY Spo e ee e u Slew lelem fe 2 poo po n 135 pdas TSO hdi ToS Fda ToS pdas Tbs pda DaS Hias TiS lees t t e Mm Measurement dimensions are intended as a
3. not be provided by the manufacturer of the projector The trigger feature will not work without an output cable from the projector but it can be S tested by connecting the Red and Green RIAS Input tor ean Trigger cable to a 9 volt battery Red DC 12 Green 0V 5 12 Volt Trigger Cable 3 prong power cable 2 3 Way Wall Switch The 3 way wall 3 IR Eye Receiver The IR Eye Receiver plugs directly switch is a wall mount control box with into the screen s RJ 45 input to present a low profile line an up stop down button and plugs of sight control option for your IR remote control even in directly into the screen s RJ 45 input a recessed ceiling installation LA L 4 IR Remote Control The Infrared 5 RF Remote Control The radio waves functions by direct line of sight contact eliminate the need for a direct line of sight with a beam range of 30 feet with a range of 150 feet Rev 010312 AS www elitescreens com info elitescreens com Installation Instructions Please consult a professional installer Elite Screens is not liable for any faulty installations 1 Select the installation location for your screen Ensure that it is within reasonable proximity from your power source 2 For best support of your screen it is ideal to secure your screen into the studs of your house s internal framework If studs a
4. s receiver Y Connect the equipment into different power outlet other than the device Pre Installation 1 Carefully unpack the screen 2 Always handle the screen in a leveled position on a clean surface 3 In order to protect the screen from exposure to stains keep the screen out of contact with foreign particles such as dust sawdust and or liquids Regardless of the mounting method the screen should be securely supported so that the vibration or pulling on the viewing surface will not cause the casing to become loose or fall The installer must insure that the fasteners used are of adequate strength and suitable for the installation location Rev 010312 AS www elitescreens com info elitescreens com Accessories for VMAX 2 Series Please make sure all accessories below are included before proceeding Green A B Infrared Remote Radio Frequency 12 Volt Trigger 3 Way Wall Switch 22 Infrared Eye Receiver AAA Batteries Bubble Level Rev 010312 AS www elitescreens com info elitescreens com Control System for VMAX 2 Series 1 5 12V Trigger The built in 5 12V trigger input allows your screen to synchronize its drop amp rise with the projector s power cycle The screen deploys when the projector powers up and will retract when the projector powers down The 5 12 Lo volt adaptor connects to your projector s trigger output via a separate cable that may or may
5. Claim Please contact us at service elitescreens com tw or call 866 2 8990 1999 America Elite Screens Inc 16410 Manning Way Cerritos CA 90703 USA Tel 1 877 511 1211 Fax 1 562 926 8433 info elitescreens com www elitescreens com Asia Elite Screens China Corp Longxi Duimianling Industry Zone Longcheng Longgang District ShenZhen GuangDong China Tel 86 0 755 8461 7989 Fax 86 0 755 8461 7669 info elitescreens com cn www elitescreens com cn Taiwan Elite Screens Taiwan Corp 4 No 42 1 Wuguan Rd Wugu Township Taipei County 248 Taiwan Wugu Industrial Park Taiwan R O C Tel 886 2 8990 1999 Fax 886 2 8990 1366 info elitescreens com tw www elitscreens com tw Rev 010312 AS www elitescreens com info elitescreens com Europe Elite Screens Europe L becker Stra e 1 22087 Hamburg Germany Tel 49 4030392494 Fax 49 40 49219200 info elitescreens eu www elitescreens eu Elite Screens France S A S 11 All e William Penn 92150 Surenes France Tel 33 1 45064735 Fax 33 1 45064735 info fr elitescreens com www elitescreens com fr Japan Elite Screens Japan Corp 467 2 606 Tsuruma Machida shi Tokyo 194 0004 Japan Tel 0120 07 0008 Fax 81 0 42 706 9130 info elitescreens jp www elitescreens jp Latin America Contact Info la elitescreens com East Asia Contact Info ea elitescreens com India Contact Info india elitescreens com 10
6. at r st m id m m m 05 ed poo foo foo T 9 ior jee par SS jod je r m 0 0 212 eale P m fo e e r 100 100 I oo coed pS e ped i ju P 20 oo yon o poo Oe adja ei e foo peo SE OO er er OO Pom P 972 a o Car oo ol jo i i 1 Screte Pasterial Orersll Height Wier Height E2 Secre1 em Paisaterial Bar B11 Leegth Distaace to Weight Bottom Edge LEF At weight Bar width Titw Soret width A2 Hols Esd Cap Distasce A1 Soren Cast Leagth spect 6 10 1 Ratio all T66 16 9 Diagonal Size A 120 150 16 9 zt I 4 3 Hias gH MactdeH E 3 Fd 00H has GH 06H E TOH E 2 has 20H 20 heaves aH hae TSH E haces S0H E
7. ation please contact Elite Screens at techsupport elitescreens com 1 If your screen does not move please check the power supply The screen will understandably not move without power 2 Make sure the power cord is firmly plugged to the power outlet 3 Make sure that all cable connections are secure 4 Ifthe screen works well with the line switch but not with the remote control please make sure the remote controls have fresh batteries Change the batteries every 6 months to ensure proper operation of the remotes 1 Q Why does my screen no longer function A Make sure your wall plug has power and that the screen is properly plugged The fuse on the screen will also need to be checked Please contact techsupport elitescreens com for the location The tubular motor in this screen is equipped with a thermal relay This feature will automatically shut off the screen in the event of the motor becoming too hot This will prevent the motor from overheating If you should experience this please let the screen s temperature decrease for 10 15 min before usage 2 Q How is the screen material cleaned A The screen material can be cleaned with mild soap and water 3 Q What type of batteries do the remote controls require A The IR and RF remote controls use AAA alkaline batteries 4 you manually pull down the screen A No manually pulling down the screen will damage the electronic motor rolling system and void your wa
8. e that proper mounting hardware is used to provide adequate strength suitable for the installation Elite Screens is not liable for any faulty installations The Screen s Top Black Drop is already set to its maximum drop distance There is NO extra top black drop in the roller Please be aware of this as it will void the limitation of your warranty Individual modifications to this product are prohibited and will void the warranty with the manufacturer Please contact Elite Screens Customer Service for any questions NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that the interference will not occur on a particular installation If this equipment causes harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures v Reorient or relocate the receiving antenna of the device which may be casing the interference v Increase the separation between the screen and the device
9. re not available use hollow anchors for mounting your wall screws into drywall If you re installing in a concrete structure use concrete bolts to secure your screen Always consult a professional installer or hardware professional to ensure that the proper screws and or hardware are being used 3 Ensure that both brackets are in perfect level alignment with one another Use wall ceiling wood screws to secure to the wood studs Use hollow anchors if mounting in drywall 4 The screen casing is designed to accept the wall screws directly If not using the Optional L Brackets http shop elitescreens com accessories aspx be sure to position the washer between the head of the wall screw and the anchor slots on the screen s casing 5 Using a tape measure mark the keyholes that are located at the back of the screen s casing end cap 6 After marking the area and predrilled hole insert the screw and have at least 1 8 from the wall to mount the screen See example in Figure 1 7 Figure 2 will show you an optional installation using chains not included Loops Optional installation method using a chain to hang the screen from the ceiling N Fig 2 Rev 010312 AS www elitescreens com info elitescreens com Troubleshooting amp FAQ S For additional inform
10. re valid for 45 days from the date issued Missing Parts must be reported within 7 days of receipt If reported after 7 days the customer will be responsible for shipping and handling fees If reported after 30 days of receipt the customer will be responsible for cost of parts and shipping amp handling fees A New or refurbished replacement will be send out to the customer depending the type of purchase new or refurbished and based on stock availability North America only U S and Canada For Warranty and Service requests please submit an RMA Service Form at www elitescreens com warrantysupportform Please visit this link for full Warranty information www elitescreens com warranty For Customer Service and Technical questions please contact Elite Screens at Telephone 877 511 1211 service elitescreens com Fax 562 926 8433 techsupport elitescreens com REMEMBER TO REGISTER YOUR PRODUCT AT WWW ELITESCREENS COM Rev 010312 AS www elitescreens com info elitescreens com Contact Information US amp Canada Tech Support amp Warranty Claim Please contact us at service elitescreens com or call 1 877 511 1211 3 or fax 1 562 926 8433 Europe Tech Support amp Warranty Claim Please contact us at service elitescreens eu or call 49 0 40 30392958 Asia Tech Support amp Warranty Claim Please contact us at service elitescreens com cn or call 86 0 755 8461 7989 Taiwan Tech Support amp Warranty
11. reference only and subject to change without notice Note Data Error may be 1 for aia 1707 41807 Units mm for tro a i 175 mm Un AS www elitescreens com Rev 010312 info elitescreens com Warranty Policy Two 2 Year parts and labor warranty from defects in workmanship from purchase date as follows except for refurbished units as specified below e Three 3 Year parts and labor warranty from defects in workmanship for GEMR Government Educational Military amp Religious purchases of new product only Refurbished Units carry 90 DAY parts and labor warranty Each party will be responsible for one way shipping during the warranty period e ARMA Return Merchandise Authorization number must be issued in order to process replacement or to authorize a return for warranty repair Elite Screens will at its sole option replace or repair the defective unit with a replacement see exceptions below after the defective unit or parts have been received Once the product is received Elite Screens will send out replacement unit to the customer by ground service subject to inventory availability Do Not Return Any Unauthorized Items to Elite Screens as they will be refused and returned at your expense The RMA Number must be included on the outside label of your shipping box Our warehouse is not authorized to accept returns without an RMA number on the shipping label RMA Numbers a
12. rranty 5 How could setup my Screens IR receiver to work with my learning remote control system Do you have any IR codes can use to achieve this A Our IR remote controls have been evaluated and entered in to the databases of some Universal remote control manufacturers Please contact the manufacturer of your remote to inquire about your remotes ability to function with ours If they have not evaluated our remote control then the following list of Binary codes will be used for most remote setups For Spectrum VMAX2 Plus Home2 and CineTension 2 Series Up 1111 0000 0001 Stop 1111 0000 0010 Down 1111 0000 0100 Rev 010312 AS www elitescreens com info elitescreens com Table imension 8 D Nn N gt x lt lt gt gt Lisit Inch LES Power Cord cap width Length C2 Wall Distamce et le ib e el Ue ooooooocjoojojojojoljojojojojo Pe ee ce oa oo jun jo r Jo oo M ee ps fst jei e foo po foo j st t pst Joo fo poo e or a Ved Lied beled bed LED Aled hani te
13. rviceable parts in this unit Do not attempt to disassemble this unit by yourself No one except authorized technicians can open and make repairs to this unit sure the power source this unit is connected to has a continuous power flow f there is need to use an extension cord make sure the cord has an equal rating as the appliance to avoid overheat Do not handle the power plug when your hands are wet or your feet are in contact with water Do not use this unit under the following circumstances e Disconnect the power cord under the conditions of heavy rain wind thunder or lightning e Avoid direct Sunshine rain shower and moisture e Keep away from fire sources and high temperature to prevent this device from overheating Cut off the power supply first before transportation or maintenance e Fully disconnect from the power supply when the unit is not in use for a long period of time as should be done with any other electric household appliance e To avoid possible injury and or an electric shock do not attempt to use the screen if there is obvious damage or if there are any evident broken parts Rev 010312 AS www elitescreens com info elitescreens com Installation Warning Due to various installation environments the instructions provided in this user s guide are for reference only Please consult a professional installation company for further installation and safety advice The installer must insur
Download Pdf Manuals
Related Search