Philips HTL6140B/12 soundbar speaker
Contents
1. Synchronize video and sound If the audio and video are not synchronized delay the audio to match the video d Press AUDIO SYNC to synchronize the audio with the video Auto volume Turn the auto volume on to keep the volume constant when you switch to a different source 1 Press AUTO VOL ON OFF to turn auto volume on or off Night mode For quiet listening night mode decreases the volume of loud sounds when audio is played Night mode is only available for Dolby Digital soundtracks 1 Press NIGHT ON OFF to tum night mode on or off Note e If auto volume is set to turned on you cannot enable the night mode Play audio through Bluetooth Through Bluetooth connect the SoundBar with your Bluetooth device such as an iPad iPhone iPod touch Android phone or laptop and then you can listen to the audio files stored on the device through your SoundBar speakers What you need e A Bluetooth device which supports Bluetooth profile A2DP AVRCP and with Bluetooth version as 3 0 EDR e The maximum operational range between he SoundBar and a Bluetooth device is approximately 10 meters 30 feet 1 Press 8 on the remote control to switch he SoundBar to Bluetooth mode L gt BT is displayed on the display panel blinking 2 On the Bluetooth device switch on Bluetooth search for and select PHILIPS HTL6140 to start connection see the user manual of the Bluetooth device on2. Bluetooth device is poor e The Bluetooth reception is poor Move the device closer to the SoundBar or remove any obstacle between the device and the SoundBar The connected Bluetooth device connects and disconnects constantly e The Bluetooth reception is poor Move the device closer to the SoundBar or remove any obstacle between the device and the SoundBar e Turn off Wi Fi function on the Bluetooth device to avoid interference EN 15 e For some Bluetooth the Bluetooth connection can be deactivated automatically to save power This does not indicate any malfunction of the SoundBar NFC A device cannot connect with the SoundBar via NFC e Make sure that the device is supported by NFC e Make sure that NFC is enabled on the device see the device s user manual for details e For pairing tap the NFC device on the NFC tag of the SoundBar DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories dts Digital Surround Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the Symbol amp DTS and the Symbol together are registered trademarks amp DTS Digital Surround and the DTS logos are trademarks of DTS lnc Product includes software DTS Inc All Rights Reserved HIGH DEFINITION MULTIMEDIA INTERFACE The terms HDMI
3. Your SoundBar supports HDMI with Audio Return Channel ARC If your TV is HDMI ARC compliant you can hear the TV audio through your SoundBar by using a single HDMI cable EN 7 HDMI OUT ARC 1 Using a High Speed HDMI cable connect the HDMI OUT ARC TO TV connector on your SoundBar to the HDMI ARC connector on the TV e The HDMI ARC connector on the TV might be labeled differently For details see the TV user manual 2 On your TV turn on HDMI CEC operations For details see the TV user manual Note e If your TV is not HDMI ARC compliant connect an audio cable to hear the TV audio through your SoundBar see Connect audio from TV and other devices on page 8 e IfyourTV has a DVI connector you can use an HDMI DVI adapter to connect to TV However some of the features may not be available Connect digital devices through HDMI Connect a digital device such as a set top box DVD Blu ray player or games console to your SoundBar through a single HDMI connection When you connect the devices in this way and play a file or game the e video is automatically displayed on your TV and e audio is automatically played on your SoundBar 1 Using a High Speed HDMI cable connect the HDMI OUT connector on your digital device to the HDMI IN on your SoundBar 2 Connect your SoundBar to TV through HDMI OUT ARC e Ifthe TV is not HDMI CEC compliant select the corr
4. how to enable Bluetooth L gt During connection BT on the display panel blinks 3 Wait until the SoundBar beeps L gt When the Bluetooth connection succeeds BT is displayed on the display panel L gt fthe connection fails BT on the display panel blinks continuously 4 Select and play audio files or music on your Bluetooth device During play if a call is coming music play is paused Play resumes when the call ends this feature is dependent on the connected mobile device e If your Bluetooth device supports AVRCP profile on the remote control you can press I lt Pl to skip to a track or press gt I to pause resume play 5 To exit Bluetooth select other source e When your switch back to Bluetooth mode Bluetooth connection remains active Note e The music streaming may be interrupted by obstacles between the device and SoundBar such as wall metallic casing that covers the device or other devices nearby that operate in the same frequency e Ifyou want to connect your SoundBar with another Bluetooth device press and hold on the remote control to disconnect the currently connected Bluetooth device Connect Bluetooth via NFC NFC Near Field Communication is a technology that enables short range wireless communication between NFC enabled devices such as mobile phones What you need e A Bluetooth device with NFC function e For pairing tap the NFC device on the N
5. play Button Action Pil Start pause or resume play I4 PI Skip to the previous or next track USB During USB play press repeatedly to select a repeat or shuffle mode or turn off a play mode EN 11 e Ifa USB storage device has a large media library it takes some time to load those contents e This product may not be compatible with certain types of USB storage device e Ifyou use a USB extension cable USB HUB or USB multi reader the USB storage device may not be recognized e Digital camera PTP and MTP protocols are not supported Do not remove the USB storage device while it is being read e DRM protected music files MP3 V MA are not supported e Support a USB port 5V 1A Auto standby When playing media from a connected device the SoundBar automatically switches to standby after 29 minutes of button inactivity and no audio video play from a connected device Set display brightness You can press DIM repeatedly to select a different brightness level of the display panel on this product Apply factory settings You can reset this product to the default settings programmed at the factory In any source mode within three seconds press Volume BASS then TREBLE L gt When the factory settings restore is complete the product automatically switches off and restarts 5 Update software To get the best features and support update your product
6. support representative Follow the instructions on the website to select your language and then enter your product model number Alternatively you can contact Consumer Care in your country Before you contact note down the model number and serial number of your product You can find this information on the back or bottom of your product Safety Risk of electric shock or fire ever expose the product and accessories o rain or water Never place liquid containers such as vases near the product f liquids are spilt on or into the product disconnect it from the power outlet immediately Contact Consumer Care to have the product checked before use ever place the product and accessories near naked flames or other heat sources including direct sunlight e Never insert objects into the ventilation slots or other openings on the product e Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Disconnect the product from the power outlet before lightning storms e When you disconnect the power cord always pull the plug never the cable Risk of short circuit or fire e Before you connect the product to the power outlet ensure that the power voltage matches the value printed on the back or bottom of the product Never connect the product to the power outlet if he voltage is different Risk of injury or damage to th
7. to the correct source for other devices Adjust the volume d Press Volume to increase or decrease a volume level e To mute sound press amp Mute e To restore the sound press Mute again or press Volume Choose your sound This section helps you choose the ideal sound for your video or music Sound mode Select predefined sound modes to suit your video or music 1 Press SOUND to select a sound option from the display panel e AUTO Automatically select a sound setting based on the sound stream e POWERFUL Enjoy thrilling arcade sounds ideal for action packed videos and loud parties e BALANCED Experience the original sound of your movies and music without added sound effects e BRIGHT Spice up your dull movies and music with added sound effects EN 9 e CLEAR Hear every detail in your music and clear voices in your movies e WARM Experience spoken words and music vocals in comfort PERSONAL Personalize the sound based on your preferences Surround sound mode Experience an immersive audio experience with surround sound modes 1 Press SURROUND ON OFF to turn surround mode on or off e On Create a surround listening experience e Off Two channel stereo sound Ideal for listening to music Equalizer Change the high frequency treble and low frequency bass settings of the SoundBar d Press TREBLE or BASS to change the frequency
8. with the latest software Check software version In HDMI ARC source press TREBLE BASS then Volume on the remote control Update software via USB d Check the latest software version on www philips com support Search for your model and click on Software and drivers 2 Download the software into a USB storage device O Unzip the download if zipped and make sure that the unzipped file is named HTL6140 BIN Q Put the HTL6140 BIN file in the root directory 3 Connect the USB storage device to the lt USB connector on this product Switch this product to HDMI ARC source On the remote control within 6 seconds press s twice and Volume once then hold down SURROUND ON L gt UPG upgrade blinks on the display panel UI A 6 Press s to start the upgrade L gt Then UPG upgrade is displayed on he display panel 7 Wait until the upgrade is completed L gt If the upgrade is complete this product automatically turns off and on again Caution Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this product 6 Wall mount Before you mount your SoundBar on the wall read all safety precautions Improper wall mounting may result in accident injury or damage If you have any query contact Consumer Care in your country e Secure the wall mount to a wall that can support the combi
9. Always there to help you Register your product and get support at www philips com welcome Contact Philips TL61 User manual PHILIPS Contents 1 Important Help and support Safety Care for your product Care of the environment Compliance 4 WWNN N 2 Your SoundBar Main unit Remote control Connectors Wireless subwoofer Nam 4 3 Connect and set up Pair up with the subwoofer Placement Connect to TV Connect digital devices through HDMI Connect audio from TV and other devices cooN NNN 4 Use your SoundBar Adjust the volume Choose your sound Play audio through Bluetooth Connect Bluetooth via NFC MP3 player USB storage devices Auto standby Set display brightness Apply factory settings NNNAA gt A gt OO 0 0 N 5 Update software Check software version Update software via USB 2 N 6 Wall mount 3 7 Product specifications 4 8 Troubleshooting EN 15 1 Important Read and understand all instructions before you use your product If damage is caused by failure to follow instructions the warranty does not apply Help and support For extensive online support visit www philips com support to e download the user manual and the quick start guide e watch video tutorials available only for selected models e find answers to frequently answered questions FAQs e email us a question e chat with our
10. F SURROUND ON 9 OFF AUTO VOL ON a r OFF NIGHT ON sa AUDIO SYNC co DIM PHILIPS 4 Standby On Switch the SoundBar on or to standby O Source buttons e HDMI ARC Switch your source to DMI ARC connection e HDMI IN Switch your source to the DMI IN connection e Switch to Bluetooth mode e USB Switch to USB mode e OPTICAL Switch your audio source to the optical connection O e AUX Switch your audio source to the AUDIO IN or AUX connection 3 5mm jack 14 gt I Previous Next Skip to the previous or next track in USB mode gt I Play Pause e Start pause or resume play in USB mode BASS Increase or decrease bass Volume control e Increase or decrease volume e amp Mute or restore volume SOUND Select a sound mode SURROUND ON OFF Select surround or stereo sound AUTO VOL ON OFF Turn auto volume on or off NIGHT ON OFF Turn night mode on or off AUDIO SYNC Increase or decrease audio delay DIM Set the brightness of SoundBar display panel TREBLE Increase or decrease treble EN Connectors This section includes an overview of the connectors available on your SoundBar Gua oF DCIN HDMI OUT ARC HDMI IN HDMI OUT ARC TOTV Connect to the HDMI inpu
11. FC tag of the SoundBar 1 Enable NFC on the Bluetooth device see the device s user manual for details 2 Tap the NFC device onto the NFC tag of the SoundBar until the SoundBar beeps e For first time connection on some mobile devices prompt for pair up appears select YES for connection tL When the Bluetooth connection succeeds BT is displayed on the display panel L If the connection fails BT on the display panel blinks continuously 3 Select and play audio files or music on your NFC device e To break the connection tap again the NFC device onto the NFC tag on the SoundBar MP3 player Connect your MP3 player to play your audio files or music What you need e An MP3 player e A 3 5mm stereo audio cable 1 Using the 3 5mm stereo audio cable connect the MP3 player to the AUX IN connector on your SoundBar 2 Press repeatedly AUX on the remote control until AUDIO IN is displayed on the display panel 3 Press the buttons on the MP3 player to select and play audio files or music USB storage devices Enjoy audio on a USB storage device such as an MP3 player and USB flash memory etc What you need e A USB storage device that is formatted for FAT or NTFS file systems and complies with the Mass Storage Class e An MP3 or WMA file on a USB storage device 1 Connect a USB storage device to this product 2 Press USB on the remote control 3 Use the remote control to control
12. and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by WOOX Innovations is under license Other trademarks and trade names are those of their respective owners N nfc The N Mark is a trademark or registered trademark of NFC Forum Inc in the United States and in other countries 2013 CSR plc and its group companies The aptX mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions 17 ee Specifications are subject to change without notice 2014 WOOxX Innovations Limited All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used by WOOX Innovations Limited under license from Koninklijke Philips N V HTL6140B 6140S_12_UM_V2 0 aS
13. and human health R Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health EN 3 Compliance C 0560 This product complies with the radio interference requirements of the European Community Hereby WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC You can find the Declaration of Conformity on www p4c philips com 2 Your SoundBar Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your SoundBar at www philips com welcome Main unit This section includes an overview of the main unit 1 PHILIPS mnfc D Standby On Standby indicator e Switch the SoundBar on or to standby e When the SoundBar is in standby the standby indicator turns red 2 SOURCE Select an input source for the SoundBar GB Display panel 4 Volume Increase or decrease volume NFC tag Tap the NFC enabled device on the tag for Bluetooth connection Remote control This section includes an overview of the remote control OF
14. d to the HDMI IN connector on your SoundBar e Reset your SoundBar to its factory settings e On the remote control select the correct audio input ake sure that the SoundBar is not muted No sound from the wireless subwoofer e Wirelessly connect the subwoofer to he SoundBar see Pair up with the subwoofer on page 7 Distorted sound or echo e If you play audio from the TV through the SoundBar make sure that the TV is muted Audio and video are not synchronized e Press AUDIO SYNC to synchronize the audio with the video Error message is displayed on the display panel e When ERROR is displayed it indicates hat an input audio format is no supported When USB ERROR is displayed it indicates that the connected USB device is not supported When HDMI ARC blinks it indicates hat the connected TV is not HDMI ARC compliant or an unsupported audio format is detected Bluetooth A device cannot connect with the SoundBar e The device does not support the compatible profiles required for the SoundBar e You have not enabled the Bluetooth function of the device See the user manual of the device on how to enable the function e The device is not correctly connected Connect the device correctly e The SoundBar is already connected with another Bluetooth device Disconnect the connected device then try again Quality of audio play from a connected
15. ect video input on your TV 3 On the connected device turn on HDMI CEC operations For details see the user manual of the device Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar speakers Use the best quality connection available on your TV Soundbar and other devices Note When your Soundbar and TV are connected through HDMI ARC an audio connection is not required see Connect to TV through HDMI ARC on page 7 Option 1 Connect audio through a digital optical cable Best quality audio DIGITAL IN OPTICAL 1 Using an optical cable connect the OPTICAL IN connector on your SoundBar to the OPTICAL OUT connector on the TV or other device e The digital optical connector might be labeled SPDIF or SPDIF OUT Option 2 Connect audio through analog audio cables Basic quality audio aE AUX IN w VIDEO Bluray Disc 1 Using an analog cable connect the AUX IN 3 5mm jack on your SoundBar to the AUDIO OUT connectors red and white on the TV or other device 2 Press repeatedly AUX on the remote control until AUX is displayed on the display panel 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices Before you start e Make the necessary connections described in the quick start guide and the user manual Switch the SoundBar
16. fore you make or change any connections make sure that all devices are disconnected from the power outlet Pair up with the subwoofer The wireless subwoofer automatically pairs up with the SoundBar for wireless connection when you turn on the SoundBar and the subwoofer If no audio from the wireless subwoofer can be heard manually pair up the subwoofer 1 Turn on the SoundBar and the subwoofer L If the connection to the SoundBar is ost the indicator on the subwoofer blinks white slowly 2 Press the CONNECT connect button on the subwoofer to enter the pairing mode L gt The indicator on the subwoofer blinks white quickly 3 On the remote control within six seconds press twice and BASS once then hold down SURROUND ON L gt If the pairing succeeds the indicator on the subwoofer lights up white L gt If the pairing fails the indicator on the subwoofer blinks white slowly 4 ifthe pairing fails repeat the steps above Placement Place the subwoofer at least 1 meter 3 feet away from your SoundBar and ten centimeters away from the wall For best results place your subwoofer as shown below Connect to TV Connect your SoundBar to a TV You can listen to audio from TV programs through your SoundBar Use the best quality connection available on your SoundBar and TV Connect to TV through HDMI ARC
17. ibility Hi Speed USB 2 0 Class support USB Mass Storage Class MSC File system FAT16 FAT32 NTFS Supports MP3 and WMA file formats Sampling frequency e MP3 8 kHz 11 kHz 12 kHz 16 kHz 22 kHz 24 kHz 32 kHz 44 1 kHz 48 kHz e WMA 44 1 kHz 48 kHz Constant bit rate e MP3 8 kbps 320 kbps e WMA 32 kbps 192 kbps Version e WMA V7 V8 V9 14 EN Subwoofer e Power supply 220 240 V 50 60 Hz Power consumption 60 W Standby power consumption lt 0 5 W e Impedance 3 ohm e Speaker drivers 1 x 203 mm 8 woofer Dimensions WxHxD 208 x 301 x 403 mm e Weight 5 8 kg Remote control batteries e 2x AAA RO3 1 5V 8 Troubleshooting Warning e Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair the product yourself If you have problems using this product check the following points before you request service If you still have a problem get support at www philips com support Main unit The buttons on the SoundBar do not work Disconnect the SoundBar from the power supply for a few minutes then reconnect Sound No sound from SoundBar speakers Connect the audio cable from your SoundBar to yourTV or other devices However you do not need a separate audio connection when e the SoundBar and TV are connected through HDMI ARC connection or e a device is connecte
18. is product e For wall mountable products use only the supplied wall mount bracket Secure the wall mount to a wall that can support the combined weight of the product and the wall mount WOOxX Innovations bears no responsibility for improper wall mounting hat results in accident injury or damage e ever place the product or any objects on power cords or on other electrical equipment e If the product is transported in emperatures below 5 C unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet e Parts of this product can be made of glass Handle with care to avoid injury and damage Risk of overheating e Never install this product in a confined space Always leave a space of at least four inches around the product for ventilation Ensure curtains or other objects never cover the ventilation slots on the product Risk of contamination Do not mix batteries old and new or carbon and alkaine etc e Danger of explosion if batteries are incorrectly replaced Replace only with the same or equivalent type e Remove batteries if they are exhausted or if the remote control is not to be used for a long time Batteries contain chemical substances they should be disposed of properly Risk of swallowing batteries e The product remote control may contain a coin button type battery which can be swallowed Keep
19. ned weight of the product and the wall mount Screw length diameter Depending on the type of wall mounting this wall mount bracket make sure that you use screws of a suitable length and diameter 3 5mm 0 14 kl gt 25mm 0 98 See the illustration in the quick start guide on how to wall mount the SoundBar 1 Secure the wall bracket on the wall with the dowels and screws 2 Hang the SoundBar on the wall bracket EN 13 7 Product specifications Note Bluetooth Bluetooth profiles A2DP AVRCP e Bluetooth version 3 0 EDR e Specifications and design are subject to change without notice Amplifier otal output power 320W RMS 0 5 dB 10 THD Frequency response 20 Hz 20 kHz 3 dB Signal to noise ratio gt 65 dB CCIR A weighted Input sensitivity e AUX 500 mV e AUDIO IN 200 mV Main unit e Power supply e Model Philips branded AC power adapter DYS602 210309W AS650 210 AA309 e Input 100 240 V 50 60 Hz 1 5 A e Output 21V 3 09A Standby power consumption lt 0 5 W e Speaker impedance e Woofer 12 x 3 ohm e tweeter 4 ohm Speaker drivers 6 x 51mm 2 woofer 2 x 25mm 1 tweeter Dimensions WxHxD 1046 x 72 x 30 mm e Weight 1 5 kg Audio S PDIF Digital audio input Optical TOSLINK USB Compat
20. t on the TV HDMI IN Connect to the HDMI output on a digital device oa e Audio input from a USB storage device e Upgrade software of this product e Charge a USB device DC IN Connect to the power supply AUX IN Connect to an audio output on a device via AUDIO IN or AUX source by pressing repeatedly AUX on the remote control OPTICAL IN Connect to an optical audio output on the TV ora digital device EN Wireless subwoofer The SoundBar comes with a wireless subwoofer CONNECT O O Cy AC MAINS 4 CONNECT connect Press to to enter the pairing mode for the subwoofer O Subwoofer indicator e When the power is turned on the indicator lights up During wireless pairing between the subwoofer and the main unit the indicator blinks white quickly e When the pairing succeeds the indicator lights up white e When the pairing fails the indicator blinks white slowly e When wireless connection is disconnected for one minute the indicator turns off G AC MAINS Connect to the power supply 3 Connect and set up This section helps you connect your SoundBar to a TV and other devices and then set it up For information about the basic connections of your SoundBar and accessories see the quick start guide Note For identification and supply ratings see the type plate at the back or bottom of the product Be
21. the battery out of reach of children at all times If swallowed the battery can cause serious injury or death Severe internal burns can occur within two hours of ingestion e If you suspect that a battery has been swallowed or placed inside any part of the body seek immediate medical attention When you change the batteries always keep all new and used batteries out of reach of children Ensure that the battery compartment is completely secure after you replace the battery e If the battery compartment cannot be completely secured discontinue use of the product Keep out of reach of children and contact the manufacturer This is CLASS I apparatus with double insulation and no protective earth provided Care for your product Use only microfiber cloth to clean the product Care of the environment ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused ps4 When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment
Download Pdf Manuals
Related Search