iogear GWHDSTX
Contents
1. QIOGEAFE Quick Start Guide Wireless HDMI Transmitter GWHDSTX PART NO Q1269 www iogear com 5 Select Add New Transmitter SETUP Add New Transmitter 4 Remove Transmitter 3 Modify Transmitter Name 5S Return The on screen display will show Searching Searching The Power LED will flash ORANGE when it is in Pairing Mode To exit Searching mode Press the Transmitter No key on the remote control TRANSMITTER Nle SOURCE A Package Contents 1 x Wireless HDMI Transmitter 1 x Quick Start Guide 1 x Mini USB to USB cable 1 x Warranty Card 1 x Mini USB Power Adapter System Requirements e IOGEAR s Wireless 5x2 HD Matrix Model GWHDMS52 e Media Source HDMI Output e Display HDTV Overview 1 LED Status Indicator 2 HDMI Connector Solid blue Power on and 3 Pairing Button wireless link established 4 Mini USB Power Jack 1 flash sec Pairing Mode 3 flashes sec During linking Top View Side View 6 When both the GWHDSTX and Receiver are in Pairing Mode it will search for each other and automatically pair Adding GWHDSTX After the pairing is complete both the GWHDSTX and Receiver will re boot and establish the link to each other automatically within 5 seconds Computer Display Setting You can adjust your display by going to your computer s screen resolution preferences to choose your HDMI ready computer setup to be i2. ence will not occur in a particular installation CE Statement This device has been tested and found to comply with the following European Union directives Electromagnetic Capability 2004 108 EC Low Voltage 2006 95 EC and R amp TTED 1999 5 EC To Enter Pairing Mode for the Receiver 1 Plug in the Power Adapter and connect the receiver to your HDMI display using an HDMI cable not included in package 2 Press the Transmitter No key on the remote control which should be included with your existing receiver SOURCE O 3 Select SETUP the Setup Select Transmitter Number menu will appear on the GWHDMS52 on screen display NS SETUP 4 Limited Warranty WE RE HERE TO HELP YOU NEED ASSISTANCE SETTING UP THIS PRODUCT Make sure you 1 Visit www iogear com for more product information 2 Visit www iogear com support for live help and product support Warranty Information This product carries a 1 Year Limited Warranty For the terms and conditions of this warranty please go to http www iogear com support warranty Register online at http www iogear com register Important Product Information Product Model Serial Number iogear custhelp com support iogear com www iogear com 19641 Da Vinci Foothill Ranch CA 92610 2014 lIOGEAR
3. n Duplicate Extend or Project Only for image on the external display Computer only Duplicate Projector only If all operation is normal the LED lights on both the transmitter and receiver will be solid blue Installation To Enter Pairing Mode for the Transmitter 1 Plug the GWHDSTX into the HDMI ready computer s HDMI port or Source player s HDMI Out 2 Power is supplied by connecting the Mini USB to USB cable included in package to the GWHDSTX and computer with their respective ports Or connect the power adapter to the Mini USB port on the GWHDSTX and a wall outlet for power supply The LED Status indicator should light blue when the GWHDSTX is connected to the computer through USB 3 Press and hold the Pairing Button 4 The GWHDSTX is in Pairing Mode once the Power LED flashes blue slowly Release the pairing button once it enters Pairing Mode FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential setting This product generates uses and can radiate radio frequency energy and if not installed and used as directed it may cause harmful interference to radio communications Although this product complies with the limits for a Class B digital device there is no guarantee that interfer
Download Pdf Manuals
Related Search