EK Water Blocks 3831109805138 hardware cooling accessory
Contents
1. Installation manual for EK VGA Supreme HF HD7970 Cu Adapter for use with EK VGA Supreme HF Easy Mount mounting system This product is intended for installation only by expert users Please consult with a qualified technician for installation Improper installation may result in damage to your equipment EK Water Blocks assumes no liability whatsoever expressed or implied for the use of these products nor their installation The following instructions are subject to change without notice Please visit our web site at www ekwaterblocks com for updates Before installation of this product please read important notice disclosure and warranty conditions printed on the back of the box The barb hose fittings require only a small amount of force to screw them in otherwise the high flow fittings might break These fittings do not need to be tightened with much force because the liquid seal is made using o rings EK recommends only market tested premixed coolants with anticorrosion additive and algaecide for your liquid cooling system CLEANING THE GPU Wipe off GPU by using non abrasive Please make sure to install the waterblock so the G1 4 threaded inlet outlet ports are turned away cloth or Q tip EKWB does not recommend using any liquids for from the PCI e connector slot Only this way you will be able to connect block properly into loop removing paste piyaa ee arseadebeceauaes Thumb nut is to be fastened APPLYING THERMAL COMPOUND Apply therm2. al compound lightly coat AMD Tahiti series GPU chip with for example Arctic Cooling MX 2 or MX 4 thermal grease EKWB recommends to apply thermal grease in cross form for best performance see Sample picture by hand Please use enclosed Thumb nut allen key only if necessary Once thumb nut can t be turned any more the maximum mounting force has been reached Mounting Apply thermal compound on the top of the copper adapter plate screw as well If the mounting screw eventually starts turning maximum force has been reached MPORTANTI if m Q EK VGA Supreme gih ao HF HD7970 Cu Tahiti XT PRO GPU a Bae ij Adapter Use enclosed 0 5mm PVC E ies washers Do not use POM standoffs Pee eee eee eee eee eee eee eee eee ni iii M2 5x6 screws J Polyamid washers O A philips screwdriver P thermal grease
Download Pdf Manuals
Related Search