ViewZ VZ-AM02 flat panel wall mount
Contents
1. lt Screw the wall mount onto the wall With arrow pointing up N WARNING Installers must verify that the supporting surface will safely support the combined weight of the equipment all attached hardware components 4 3 Installing the Decorative Covers Top ofthe display 54 Note Choose appropriate screws washers and spacers if necessary according to the type of screen Screw the VESA plate onto the display all screws but do not over tighten 6 7 5 Hooking the Display onto Wall Mount 6 Cable Management It is necessary to slightly loosen or tighten the adjustment screw using anAllen key Connect the cables to your display and route along the arms Fit the cable cover into rail to hold the cables Insert the VESA plate into the mount rail Tighten screw that is previously removed with a proper screwdriver Note Leave slack in the cables for cantilever arm movement 8 7 Adjustment Adjust to the desired position or tilt Maintenance e Check that the bracket is secure and safe to use at regular intervals at least every three months e Please contact your dealer if you have any questions 9 102. INSTALLATION MANUAL Full Motion LED LCD TV Wall Mount CAUTION DO NOT EXCEED RATED LISTED WEIGHT SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR AN 75 75 100 100 200x100 200x200 ISSUED MAR 2013 NOTE Read the entire instruction manual before you start installation and assembly WARNING Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet If you have any questions regarding any of the instructions or warnings please contact your local distributor e This mounting bracket was designed to be installed and utilised ONLY as specified in this manual Improper installation of this product may cause damage or serious injury e This product should only be installed by someone with good mechanical ability who has basic building experience and fully understands this manual e Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components e f mounting to wood wall studs make sure that mounting screws are anchored into the center of the studs The use of a stud finder is highly recommended e Always use an assistant or mechanical lifting equipment to safely lift and position the equipment Tighten screws firmly but do not over tighten Over tightening can cause damage to the items This greatly reduces their holding power e This product is inte
3. nded for indoor use only Using this product outdoors could lead to product failure and personal injury 1 Component Checklist IMPORTANT Ensure that you have received all parts according to the component checklist prior to installation If any parts are missing or faulty telephone your local distributor for a replacement decorative cover x2 e cable cover x1 articulated arm assembly 3mm Allen key x1 D Package M mw D M4x14 x4 M5x14 x4 M6x14 x4 M8x20 x4 M A M B M D 1 D5 washer x4 D8 washer x4 small spacer x8 M F M G Package W o gt 16 3 55 x3 concrete anchor x3 D6 washer x3 W A W B W C 2 1 Removing the VESA Plate Q By Y Find and mark the exact Drill pilot holes location of mounting holes alls A Ou Z Screw the wall mount onto With arrow pointing up the wall N WARNING e Make sure that mounting screws are anchored into the center of the studs The use of a stud finder is highly recommended e Installers are responsible to provide hardware for other types of mounting situations e Installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components 34 2b For Solid Brick Concrete Mounting Mark the exact Drill pilot holes location of mounting holes
Download Pdf Manuals
Related Search