SYBA SY-PEX50040
Contents
1. About the PCI E 1 O card This PCI E I O card uses an all in one solution which provides superior performance and unmatched date transfer rates The most advanced feature is it uses of a single interrupt which is set automatically by the host system and share among all on board I O ports Windows 2000 XP Server2003 Vista 7 Pentium or equivalent notebook computer with available PC Card slot Hardware Installation 1 Turn off your computer and connect all devices to it 2 Remove the computer s cove Refer to your computer user manual for more details 3 Find an unused PCI E slot and remove the metal bracket Keep the bracket screw for later use 4 Align the card horizontally with respect to the PCI E slot and insert it into the sot Once your have properly positioned the PCI E I O card into the slot Secure the PCI E I O card with the bracket screw you have saved 5 Replace the computer s cover 6 Turn your computer on You are now ready to install the driver Driver Installation Driver locations All the drivers for the following PCI E I O card are in these directories of the driver CD 2S 2S1P 4S 1P 8X5 For Windows 32 64 bit 1 At the found new hardware wizard click cancel 2 Insert the Driver CD and X lIOC 32 or X lIOC 64 3 Double click setup and click Next and finish To Verify Windows Driver Installation 1 Right click My Computer then click Manage Click Device Manager 2 Click onthe2. device detection and driver installation can be confirmed from Device Manager For Example Proper detection of the 8X5 PCI E Card 2 Serial 1 Parallel can be confirmed by viewing the Device manager as shown below wr Network adapters Ports COM amp LPT 7 HIGHSPEED PCI_COM COM3 F HIGHSPEED PCI_COM coma 7 HIGHSPEED PCI_LPT LPT3 on Sound video and game controllers Installation DOS Driver The following procedures explain how to install 8X5 serial and parallel I O ports on DOS Step 1 Copy mtdosin exe to C Drive from Floppy The command is copy a mtdosin exe c Step 2 type mtdosin a r and press Enter a is used for adding 8X5 ports On Successful installation information is displayed as below Found Suntac Technology pci device 6872 0 Serial Port1 at 3EB Serial Port2 at 2EB PrinterPort1 at 278 Detected 1 PCI device s COM1 exists at 3FB COM2 exists at 2FB COM3 exists at 3EB IRQ11 COM4 exists at 2EB IRQ11 LPT1 exists at 378 LPT2 added at 278 IRQ 11 Packages 1 PCI E I O card 2 Driver CD 3 User Manual 4 Bracket with COM ports subject to different models
3. plus sign in front of Ports COM amp LPT two Hi Speed PCI E Serial Port and one Hi Speed PCI E Parallel Port should be displayed 3 Double click Multifunction adapters Hi Speed PCI E Multi l O Controller should be displayed Change COM Port Address Some serial devices need a specific COM port in order to work If your serial devices work properly do not change this settings For Windows 2000 XP Server 20003 Vista 7 Serial Port Installation 1 From the Device Manager window double click Ports COM amp LPT then double click the Serial Port you want to change 2 Click Settings tab and click Advanced 3 Click the down arrow that is next to the COM Port Number box select a COM port that is not in use then click OK 4 Click OK then close Device Manager to save the changes Follow steps 1 4 again to change the second serial port if needed Change Parallel Port Address Some parallel devices need a specific parallel port in order to work If your parallel devices works properly do not change this settings For Windows 2000 XP Server 20003 Vista 7 Paraller Port Installation 1 From the Device Manager window double click Ports COM amp LPT then double click the Hi Speed Parallel Port 2 Click Port Settings tab 3 At the LPT Port Number box click the down arrow and select an LPT port that is not in use 4 Click OK then close Device Manager to save the changes Verifying Driver Installation 8X5
Download Pdf Manuals
Related Search