SYBA SD-PEX20080
Contents
1. SE MANL VL80x 1 EN 1 User Manual Introduction This Expresscard or PCI Express 2 0 to USB 3 0 Host Controller Card support Super Speed USB 3 0 standard operating at 5 Gbps full duplex mode which is 10 times faster than USB 2 0 High Speed 480 Mbps standard and it is also backward compatible with current USB 2 0 devices FEATURES AND SPECIFICATION General Based on VLI VL80x USB 3 0 Host Controller IC Compliant with Intel s Extensible Host Controller Interface xHCI Specification Revision 0 96 Compliant with Battery Charging Specification Revision 1 1 e Compliant with PCI Express Base Specification 2 0 e MS drivers for Windows 7 Vista XP 2000 Server 2003 2008 32 64 bit OS PCI Express to USB 3 0 Host Controller Card Model e PCI Express 2 0 1 Lane x1 interface with data transfer rate up to 5Gbps e Backward compatible to PCI Express 1 0a with data transfer rate up to 2 5Gbps e Supports Standard and Low profile desktop computer Internal HDD power connector for supplying extra 5V power to the USB ports e Internal HDD power connector LED indicator Lights up when USB bus power is supplied from the HDD power connector connected to the power supply unit PSU ExpressCard to USB 3 0 Host Controller Card Model e Compliant with PCI ExpressCard Revision 2 0 e Fully Plug amp Play and Hot Plug supported DC 5V DC power jack to provide extra power for high power USB devices USB Interface e Complia2. STALLATION For PCI Express to USB 3 0 Host Controller Card model 1 Turn off your computer and all external devices connect to it and 2 Disconnect your computer from the power sources 3 Open the computer case Refer to your computer user manual for more details 4 Locate an available PCI Express slot preferably a PCI Express 2 0 slot and remove the slot bracket Save the bracket screw for later use 5 Align the controller card horizontally with respect to the PCI Express slot and insert it into the slot 6 ip 8 firmly and evenly Once you have properly positioned the card into the slot fasten it to the computer case with the bracket screw you have saved To get power for USB device such as 2 5 hard drive enclosure please always connect the power cable to the product and the power supply unit PSU of the computer Secure the computer case and switch on your computer For Expresscard to PCI Express to USB 3 0 Host Controller Card model 1 Insert the ExpressCard adapter into the ExpressCard slot on your notebook x 2 If you use a third party s 5V DC power supply make sure the polarity of the DC power supply plug is correct See below figure for the indication of 5V and Ground polarity e 3 To get extra power for high current USB devices such as 2 5 hard drive enclosures connect the optional Power cable or DC 5V adapter to the DC power jack on the product DRIVER INSTALLATION Instal
3. ling Windows 7 Vista XP 32 64 bit driver 1 Insert the driver CD disc into your optical drive Assume the optical drive letter is D 2 Browse to the driver folder D VLI VL80x 3 Double click on setup exe 4 The Installation Wizard will guide you through the setup process Follow the on screen instructions until the installation is completed Verifying Driver Installation Make sure the following items appear in the Universal Serial Bus Controllers category in the Windows Device Manager and there is no yellow exclamation mark then you have successfully installed the driver for the product VLI USB 3 0 Host Controller VLI USB 3 0 Root Hub GETTING THE LATEST DRIVER SOFTWARE amp DOCUMENT 1 Visit http www drivers download com 2 In Drivers Search section enter the Download code DL code DL 0313102 to search for the latest driver software and document Note Please refer what model you have purchased For ExpressCard model only All contents and specification mentioned in this manual are subject to change without prior notice All brand company names logos and trademarks referenced in this manual are the property of their respective owners Our products including the packaging are not toys and they might contain small parts and sharp objects Please keep away from children
4. nt with Universal Serial Bus 3 0 Specification Revision 1 0 Provide USB 3 0 Super Speed 5 Gbps host port backward compatible with USB 2 0 High Speed 480Mbps Full Speed 12Mbps and Low Speed 1 5Mbps interface Supports all USB compliant data transfer types Control Bulk Interrupt Isochronous e Supports all USB compliant peripherals e g keyboard mouse monitor joystick etc Full support of real time dynamic insertion and removal of USB devices PACKAGE CONTENTS i Please check whether the package contains following items If any pelh is missing or damaged please contact the retailer as soon as possible e Expresscard or PCI Express 2 0 to USB 3 0 Host Controller Card x1 e Driver CD x 1 e User Manual x 1 e Optional Power cable x 1 e Optional Universal AC to DC 5V TTE xie SYSTEM REQUIREMENT e Motherboard with one available x1 x4 x8 or x16 PChExpress 1 0 2 0 slot e Notebook with one available Expresscard slot e PCI Express 2 0 interface is recommended for fully utilizing the USB 3 0 5 Gbps bandwidth e Supported operation system e Optical drive for driver installation WARNING Before installing and activating the controller card please make sure you have a complete backup of your existing data from hard drives Manufacturer is not responsible for data loss due to abuse misuse or neglect Should you have any installation problem please contact your dealer for assistance HARDWARE IN
Download Pdf Manuals
Related Search