Pyle PSBV200BT soundbar speaker
Contents
1. 9 10 1 GENERAL OPERATION 10 2 LISTEN TO RADIO 11 3 SD USB SLOT OPERATION 12 4 HOW TO OPERATE BLUETOOTH FUNCTION 12 PACKAGE CONTENTS s 2PCS AAA Batteries 1PC Owner s Manual J 1PC 3 5mm 3 5mm plug connection cable o 7770 1 Remote Control 7 IMPORTANT SAFETY INSTRUCTIONS Warning To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture Dangerous high voltages are present inside the enclosure Do not open the cabinet refer to qualified personnel only triangle is intended to alert user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The lighting flash with arrowhead symbol within an equilateral The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instruction in the literature accompanying the appliance 1 Read these instructions All the safety and operating instructions should be read before the product is operated2. 3 5mm mini plug cable 3 CONNECT WITH TV DVD To listen to the sound source from Television and or CD VCR DVD DVR players connect the unit with the external device as below TV Audio Out OOK rone Biker Audio In ieee CD VCR DVD DVR Players FRONT PANEL FUNCTIONS Power switch Standby Input Play pause phone LCD display Power indicator Remote sensor Pre VOL Next VOL 10 USB host 11 SD MMC slot BACK PANEL FUNCTIONS 1 PC FM ANT input jack 3 AUX 2 L R input jacks 2 AUX 1 L R input jacks 4 18V 2 5A REMOTE CONTROL FUNCTIONS 1 STANDY BY Press to turn on the unit from standby model Press again to turn the unit off stand by 2 3D Press to turn on the surround sound effect Press again to turn it off 3 MUTE Press to turn off the sound temporary press again to turn the sound back 4 INPUT Press repeatedly to select the input source as desired 5 CH In FM radio mode press to search the stored upper channels 6 EQ 11 Mode for choose in FM mode press choose stereo or mono 7 14 In Card USB mode BLUE mode press to choose previous file press and hold to fast rewind in FM radio mode pre
3. gt 80dB Channel Separated Rate 1KHZ gt 40dB Woofer Impedance 8 Ohm Tweeter and full range speaker Impedance 4 Ohm THD 1KHz 1W 8Ohm lt 0 5 Frequency Response 20 2 20 2 Dimensions WxDxH 605x250x120MM Weight 5 3KGS NOTE Specifications are subject to change for improvement without prior notice PLACING THE UNIT Take advantage of 3D stereo technology you can listen to surround sound without extra speakers Placing your system as follows and turn on BASS or TRE effect by pressing these Buttons on the remote control you will get the surround sound effects Your Listening Position SYSTEM CONNECTIONS 1 CONNECT POWER SUPPLY Insert the power plug into a wall socket Make sure the voltage marked at the rear panel is same as your AC power Do not operate with wet hands to avoid electric shock Sockel D Power plug 2 CONNECT WITH PC MP3 To listen to the sound source from PC Computer or MP3 Players connect the unit with the external device as below
4. PYLE PSBV200BT Home 300 Watts Bluetooth Sound Bar Systems W USB SD FM Radioa Wireless remote OWNER S MANUAL PLEASE READ BEFORE OPERATING THIS EQUIPMENT WWW PYLEAUDIO COM TABLE OF CONTENTS TABLE OF 5 1 PACKAGE 1 IMPORTANT SAFETY INSTRUCTIONS 2 3 FEATURES 3 1 4 PLACING THE 4 SYSTEM 5 1 CONNECT POWER SUPPLY 5 2 CONNECT WITH PC amp Mp3 5 3 CONNECT WITH TV DVD 6 FRONT PANEL 7 BACK PANEL FUNCTIONS 7 REMOTE CONTROL FUNCTIONS 8 HOW TO USE THE REMOTE CONTROL
5. card choose CARD 4 The unit will play the MP3 MWA songs automatically 5 Press 144 or PPI button on the remote control to choose previous or next songs Press and hold the buttons to fast rewind fast forwar 6 When you turn off the unit and turn it on again the unit will automatically play the last song which you played before turnoff 4 HOW TO OPERATE BLUETOOTH FUNCTIONS 1 Press INPUT to enter BLUE mode then unit will auto show 0000 on display when connecting with your mobile phone in first times The unit will auto enter BLUE mode when there aren t any USB sticker or SD cards in unit 2 Use mobile phone bluetooth search and choose enter 0000 for paired with unit The unit will control your mobile phone music by press Pll or 4 VOL and PPI these keys had same function with USB CARD mode 3 When mobile phone had a call the unit will show CALL press to listening phone and the meanwhile you will enter handsfee mode the effect distance will be 1 meter Hang up by repeat press the unit will resume to play music 4 The bluetooth of Unit will auto search and connecting with the last mobile phone after power off 5 Our products had pass BLUETOOTH BOB certificates Bluetooth Note FCC ID This device comply with parts 15 of the FCC rules Equipments Regulations Operations is subject to the following tow conditions 1 The d
6. polarity when installing the batteries as indicated next to the battery compartment Reversed batteries may cause damage to the device 3 Do not mix different types of batteries together e g Alkaline Rechargeable and Carbon zinc or old batteries with fresh ones 4 If the device is not to be used for a long period of time remove the batteries to prevent damage or injury from possible battery leakage 5 Do not try to recharge batteries which are not designed to be recharged They can overheat and rupture 6 Do not dispose of batteries in fire Batteries may explode or leak 2 Effective scope of the remote control The remote control has an operating range which is less than 16 feet and at 30 degree angle left or right away from the system Approx 16 feet NOTES When there is an obstacle between the unit and the transmitter the transmitter may not operate When direct sunlight an incandescent lamp fluorescent lamp or any other strong light shines on the remote sensor of the unit the remote operation may be unstable OPERATIONS 1 GENERAL OPERATION 1 Press the POWER button on the front panel of the unit to turn the unit to Standby mode 2 Press the STANDBY button on the unit or remote control to power on the unit 3 Press the INPUT button on the unit or remote control repeatedly to select the
7. 2 Keep these instructions The safety and operating instructions should be retained for future reference 3 Follow all instructions All operating and use instructions should be followed 4 Do not use this apparatus near water Do not use this product near water and moisture for example near a bathtub washbowl kitchen sink or laundry tub a wet basement or near a swimming pool 5 Clean only with dry cloth Unplug this product from the wall outlet before cleaning Do not use liquid cleansers or aerosol cleansers Use a dry cloth for cleaning 6 Do not block any ventilation openings Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure reliable operation of the product and to protect it from overheating These openings must NOT be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface 7 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 8 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 10 Unplug this apparatus during lightning storms or when unused for long period of time 11 Power Source The product should be operated only from the type of power source indicated on the rear of the unit 12 Overloading Do not overload wall o
8. evice may not cause harmfull interference and 2 The device must accept any interference received including interference that may cause undesired operation MAD IN CHINA
9. input sources to USB CARD FM radio Blue AUX1 AUX2 PC as desired 4 Hold Press the 4 gt gt VOL buttons on the unit or press it on remote control to adjust volume as desired Short press M4 or gt gt for choose PRE or NEXT song 5 Press the Bass buttons on the remote control to adjust the sound level of woofer 6 Press the 3D button on the remote control to turn the Surround Sound Effect ON press again to turn it OFF 7 During listening press the MUTE button on remote control to turn off the sound temporary MUTE will appear on the display press again to turn the sound back on 8 During listening press the RESET button on the remote control to reset the sound level to default settings 9 When finished listening press the STANDBY button on the unit or remote control to turn off the unit Standby mode NOTE If you will not use the unit for long period of time press the POWER button on the front panel of the unit to cut off the AC supply 2 LISTEN TO FM RADIO Connect the supplied 3 5mm audio cable to FM ANT jack on the rear of the unit as the figure below Extend the wire and relocate it to get the best reception d 1 Power ON the unit as previous procedures 2 Press the INPUT button on the unit or remote control repeatedly until FM frequency appears on the display 3 Press M lt or gt gt I button on remote control repeatedly to search the specific radio stati
10. ons To search the radio stations in auto mode Press and hold gt gt I button two seconds then release the button The unit will auto search the next available radio station then stop Repeat above procedure to search all available radio stations 4 To store the current received radio station into the memory Press the button on the remote control CH 01 will appear the display Press the CH CH buttons repeatedly to select channel number as desired Press the MEMORY button again to stored the current radio station to the selected channel 5 To listen the preset channels press the CH CH buttons on the remote control repeatedly until the desired channel appears on the display 6 Press the EQ button on the remote control repeatedly to select stereo or mono as desired STEREO or MONO will appear on the display 7 Press the SCAN button on the remote control to auto search the working radio station and auto store in memory then press CH or CH to choose the desired radio station 3 SD USB SLOT OPERATION Before connecting USB flash drive or SD cards please make sure they are in right direction Refer following figure 1 Power ON the unit as previous procedures 2 Insert SD cards to SD slot and or USB memory stick to USB slot 3 Press INPUT button on the unit or remote control repeatedly until CARD or USB is displayed To play files in USB choose USB To play files in SD
11. ss to go to lower frequency radio stations 8 In Card USB mode or BLUE mode press to play pause in FM radio mode press to store the current radio station into the memory 9 gt gt In Card USB mode or BLUE mode press to choose next file press amp hold to fast forward in FM radio mode press to go to upper frequency radio stations 10 Scan in FM mode press to auto search and store working stations in BLUE mode press enter paired mode then display show 0000 11 CH In FM radio mode press to search the stored lower channels 12 REPEAT in music model press for choose repeat ONE or ALL 13 VOL Press to reduce the sound level 14 VOL Press to increase the sound level 15 Bass Press to reduce the sound level of woofer 16 Press to increase the sound level of woofer 17 TRE Press to reduce the Treble 18 RESET Press to reset the sound level to default setting 19 TRE Press to reduce the Treble HOW TO USE THE REMOTE CONTROL 1 Battery Installation a Slide and lift up the battery door Install two size batteries included into the battery compartment according to the polarity markings inside battery compartment c Replace the battery door BATTERY PRECAUTIONS Follow these precautions when using batteries in this device 1 Use only the size and type of batteries specified 2 Be sure to follow the correct
12. utlets and extension cords as this can result in a risk of fire or electric shock 13 Object and liquid entry Never push objects of any kind into this product through as they may touch dangerous voltage points or short out parts that could result in fire or electric shock Never spill or spray any type of liquid on the product 14 Service Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel FEATURES Entire wooden case piano style painted front panel with blue backlight LCD display 3D technology for true surround sound FM stereo radio with automatic search and can store 30 stations USB 2 0 host and SD MMC connector for external moving HD flash drive SD MMC card can play MP3 WMA format music e INPUT STANDBY JPLAY PAUSE PHONE 4 VOL VOL buttons e AUX1 AUX2 PC MP3 FM ANT inputs Bluetooth amp handsfree functions 5 25 woofer 2x3 full range speaker and 2x1 tweeter With remote control SPECIFICATIONS Power Supply AC 100 120V 50 60Hz Peak RMS Output 300W Input Sensitivity 400mV 50 S N A Weight
Download Pdf Manuals
Related Search