Pyle PHCT45 cable network tester
Contents
1. 25 e Serial Network Cable Tester Test by cabled of the Some BNC Axes 1 Put one end of the cable info both main tester and BNC socket and putthe other Into the remote tester 2 Switch on the power which works if the light is on 3 BNC light will not be on when the cable is connected Any flash of the light means an improper cable is connected 4 Press the button on the left of the main tester If the light is green the cable works If not means red or any other color of light the cable is out of work Test by Twin twisted Gables i 1 Put one end of the cabie inlo the main tester 2 Switch on the power which works If the light flashed 3 Once switched on LEDS of the remote tester will scan the cable accordingly If the cables are good the corresponding LEDS will turn green sequently if the cables are ouf of work the LEDS will f st turn green then red of other others or the LEDS will not be on or be on disorderly 4 if the cables are shielded shieldingis tested when GND is tumed on If shielding Is normal the corresponding LEOS and GNB will turn green Id not the LEDS will first become green then red or will not be on atoll Notice KERIM RERUN 1 251451 Twin end can test cables of the same BNC axes and double twisted cales 251452 Single end the two ends of one cable can be connected to the main tester tor test if remote tester is not applied 252452 Synchro when test I2. s done by both main tester only connection or open circuit can be seen from the main tester while opposite commection or short circuit is displayed by the remote tester Red light means opposite connection and non ight means open circuit When test is done by main tester exclusively only connection of the cables can be seen while opposite connection cannot DISTRIBUTIOR N ad Network Cable Tester PHCT45 www pyleaudio com
Download Pdf Manuals
Related Search