Planar Systems PLL2710W
Contents
1. and hold the 1l button and the Y button for 3 seconds to lock all 5 buttons The LED LCD Monitor will show a Locking Power Button message for 5 10 seconds and the message will disappear automatically Repeat this step to unlock i Advanced Operation OSD Menu You can use the OSD menu to adjust various settings for your LED LCD Monitor Press the 1l button to display the OSD Menu and use or A to select the desired OSD menu IRZ EITA LUCERE Input Select Color Adjust Information G Manual Image Adjust Setup Menu w Memory Recall IA Exit Select Short Cuts Function from the button s H Auto Image Adjust To auto adjust Horizontal Position Vertical Position Phase Fine Tune and Clock H Size of the screen Contrast To adjust the foreground white level of screen image A increase contrast VW decrease contrast 1 Brightness To adjust the luminance of the video go i A increase brightness WV decrease brightness ECO Mode Allows the user to change the ECO mode Contrast and Brightness adjustment will be disabled when ECO is active Press A or V key to adjust the ECO Mode in three levels Input Select When press Input Select change Input signal to VGA DVI or Auto Color Adjust To select the color for improving brightness and color saturation between 9300K 6500K 5400K and User Color 9300K Adds blue to screen image for cooler white 10 6500K Adds red to scr2. the monitor 4 Set the timing mode on your computer Recommended resolution and refresh rate is 1920 x 1080 60Hz Figure 1 a ca er Ll a m et w H T LE B DVI cable VGA cable Power cable I Basic Operation Before using the LED LCD Monitor Connect external equipment properly Insert the power plug and the power LED indicator will light orange Power On Off To turn the LED LCD Monitor on off Press Power button on the front of LED LCD Monitor The power LED indicator light will be blue when the LED LCD Monitor is on Using the OSD Menu Use OSD menus to adjust settings by using the menu button on the front of the LED LCD Displays main menu Exits from OSD menu Confirm the selection Selects between VGA DVI or Auto mode Press the button for three Monitor seconds to auto adjust the image VGA only Select the desired item when in OSD menu OSD Lock Out Function When LED LCD Monitor is in normal mode the OSD Lock Out function can be enabled Option 1 OSD lock all 4 buttons are locked except the POWER button Press and hold the 1l button and the A button for 3 seconds to lock the OSD buttons The LED LCD Monitor will show an Locking OSD message for 5 10 seconds and the message will disappear automatically Repeat this step to unlock Option 2 OSD amp Power button lock all 5 buttons including the POWER button are locked Press
3. PLANAR PLL2710W LED LCD Monitor USER S GUIDE www planar com Content STOTT S COI 10S soscrits aN EEr TEE a 1 PrO O o E EE EEEE E E EAE OA ENE OEE 2 P AGAIN SINC T AE A AA E AE A A E A T E A A A 3 LEE S UM o AN EEA ET EE A EA EEE A E S ETA 4 Front View of the cal 6 B Kiev nn te am re Pm em nee ee asesorio ast 5 Bere Te View of the ProdUCt gern ne ere rr nae vane re Tm Dre 6 Quick aks e 0 9 Teese eo ean re Ee Ceara re 7 Advanced OperatiON OSD MeN ccsssssssssssesesessssssssssssssesesesesesesesesesesesesesesesesessesesesesesesesesescacaeaesesesenesesenses 10 SUPPONGO TAIT MOGE Sess E E 13 Technical oMa ON easan Eaa Tes arr nae E tr TE cer aE REE nn ee on SOT 14 Wall Mount Installation INStructiOns uc ecscssccscsscsccsscssscsssscsssssscsssscsssscsssscessssscessssessscessssessssesessssesseseseess 15 Care and WAIL CAIN CC sects ves osexccaccenssssessansceecscaacceossvenzccorscasziscsunscansstcteseesepsavssassunsoseeunss suteatutvetasuesotenvateacisseeertuans 16 MNOS FIC OUI urrara AEE EA TAE OON EVOO 16 PP Lee DOT eaa E S 16 Operation Instructions Thank you for purchasing the PXL2760MW LED LCD monitor Please read this guide thoroughly before installation FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING FOR FCC CERTIFIED MODELS This LED LCD Monitor has been tested and found compliant with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide prop
4. e Display Area Temperature Compliance Power 27 TFT with LED backlight On 30 Watts typical 40 Watts maximum Standby Mode lt 0 5 Watt Off lt 0 5 Watt Full HD 1920 x 1080 max Vertical Frequency 60Hz max 0 3114 x 0 3114 mm 16 7M 0 20 597 89 mm x 336 31 mm Operating 0 C 40 C Storage 20 C 60 C FCC B CE UL cUL Input Voltage AC100 240 V f Wall Mount Installation Instructions Preparing To Install The Optional Wall Mount Arm not included This LED LCD Monitor can be attached to a wall mounting arm you can purchase separately Turn the power OFF then disconnect the cables from the LED LCD Monitor before performing the procedure below 1 Lay the LED LCD Monitor face down on a soft surface 2 Remove the 4 screws holding the stand to the hinge 3 Remove the stand Attaching The Optional Wall Mount Arm not supplied 100mm x 100mm Screw Follow these steps to finish installing the wall mounting arm MOURNE OPUOR 1 Place the wall mounting arm onto the back of the LED LCD m Monitor Line up the holes of the arm with the holes in the a 11 00mm 3 back of the monitor ak i 2 Insert the 4 screws into the holes and tighten 3 Reconnect the cables Refer to the User s Guide that came with the optional wall mounting arm for instructions on attaching it to the wall 4mm 0 7 pitch threaded holes x 4 NOTE e 100mmx100mm VESA high hole n 4 M4 pitch 0 7 mm screw mountin
5. een image for warmer white and richer red 5400K Adds green to screen image for a darker color User Color Individual adjustments for red R green G blue B 1 Press button 2 to select the desired color 2 Press A or V button to adjust selected color Information To display the information regarding the current input signal coming from the graphic card in your computer Note See your graphic card user guide for more information about changing the resolution and refresh rate Manual Image Adjust To manually adjust the Horizontal Size H V position Fine Tune Sharpness Video Mode adjust and Prest Mode Horizontal Size To adjust the width of the screen image A increase the width of screen image W decrease the width of screen image H V Position To adjust the horizontal and vertical position of the video H Position A move screen to the right V move screen to the left V Position A move screen up V move screen down Fine Tune To adjust the delay time of data and clock Press A or V to adjust to your preference Sharpness To adjust the clarity of a non Full HD Resolution 1920x1080 signal with A or V button Video Mode adjust To select the video mode from Full Screen or Aspect Ratio Full Screen To select full screen size image Aspect Ratio To select input timing image size Preset Mode Provides an optimum display environment depending on the contents displayed It contains 5 user selectable pres
6. er protection against harmful interference to a residential installation This LED LCD Monitor generates uses and can radiate radio frequency energy Harmful interference to radio communication may be the result if it s not properly installed and used However there is no guarantee that interference will not occur in a particular installation If this LED LCD Monitor does cause serious interference to radio or television reception resetting may correct it Moreover users are encouraged to reduce interference by doing one or more of the following Reorient or relocate the receiving antenna Move the LED LCD Monitor and the receiver further away from each other Connect the LED LCD Monitor into an outlet on a circuit different from that to which the receiver is connected Consult your local dealer or a qualified technician FCC Warning To assure a continued FCC compliance a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores Also any unauthorized changes or modifications to this LED LCD Monitor would void the user s authority to operate this device Note If necessary shielded interface cables and AC power cord must be used to meet the emission level limits According to WEEE regulation this LED LCD Monitor can t be handled as normal trash in Europe when it is out of usage Please refer to the recycle information on Planar s website to handle it gee O m
7. ets Standard is for general windows environment and monitor default setting Game optimized for PC game environment Cinema optimized for movie and video environment Scenery optimized for displaying outdoor scenery images Text optimized for text editing and viewing in a word processing environment Setup Menu To set up Language Select OSD Position OSD Time Out OSD Background Language Select To allow users to choose from available languages 11 OSD Position Press A or V button to select between horizontal and vertical OSD Position adjustment H Position To horizontally adjust the OSD position A move OSD to the right V move OSD to the left V Position To vertically adjust the OSD position A move OSD up V move OSD down OSD Time Out To automatically turn off On Screen Display OSD after a preset period of time OSD Background Allows the user to turn the OSD background On or Off Memory Recall To recall factory settings for Video controls Press button 2 to select the Memory Recall menu option Supporting Timing Modes STANDARD RESOLUTION 720 x 400 70Hz 640 x 480 60Hz MAC VT MAC 832x624 75Hz Warning Do not set the graphic card in your computer to exceed these maximum refresh rates Doing so may result in permanent damage to your LED LCD Monitor ff Technical Information Panel Power Management Displayable Resolution Pixel Dimension Display Color Tilt Activ
8. g kit not included i Care and Maintenance Care Avoid exposing your LED LCD monitor directly to sunlight or other heat source Place your LED LCD monitor away from the sun to reduce glare Put your LED LCD monitor in a well ventilated area Do not place any heavy things on top of your LED LCD monitor Make certain your LED LCD monitor is installed in a clean and moisture free area Keep your LED LCD monitor away from magnets motors transformers speakers and TV sets Note Move the LED out of the package and take off the plastic bag and Polystyrene Foam Pull the base from Parallel versus Panel to Vertical Adjust the Panel within 0 degree leaning forward and 20 degree leaning backward Safety Tips if smoke abnormal noise or odor came out from your LED LCD monitor caution you should remove the power cord immediately and call your service center Never remove the rear cover of your LED LCD monitor cabinet The display unit inside contains high voltage parts and may cause electric shock to human bodies Never try to repair your LED LCD monitor yourself Always call your service center or a qualified technician to fix it i Troubleshooting No power Make sure A C power cord is securely connected to the power adapter and the power supply is firmly connected to the LED LCD monitor Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage Make
9. ore information on how to recycle your product please visit WWW PLANARSYSTEMS COM GREEN Il Safety Precautions Follow all warnings precautions and maintenance as recommended in this user s manual to maximize the life of your unit Do Turn off the product before cleaning LED Display screen surface may be cleaned using a soft clean cloth moistened with mild window glass commercial cleaners or 50 50 mixture of water and isopropyl alcohol Use a soft cloth moistened with mild detergent to clean the display housing Disconnect the power plug from AC outlet if the product is not going to be used for an extended period of time Don t Do not touch the LED Display screen surface with sharp or hard objects Do not use abrasive cleaners waxes or solvents for your cleaning Do not operate the product under the following conditions o Extremely hot cold or humid environment o Areas susceptible to excessive dust and dirt o Near any appliance generating a strong magnetic field o Indirect sunlight If smoke abnormal noise or odor emits from your LED LCD Monitor remove the power cord immediately and call your service center Never remove the rear cover of your LED LCD Monitor The display unit inside contains high voltage parts and may cause electric shock Never try to repair your LED LCD Monitor yourself Always call your service center or a qualified technician to fix it Due to safety concerns if the VESA mounting kit i
10. s purchased separately please make sure the mounting kit is UL listed and replaceable only by service personnel I Package Overview Congratulations on your purchase of this high performance edge lit LED LCD monitor This LED LCD Monitor comes with the following accessories ee __ _ Ei LED LCD Monitor Base Power Cord User s Guide f First Setup Install the stand base 1 Lay the LED LCD Monitor flat on a table with the LED screen face down To prevent the monitor from being scratched put a piece of soft cloth on the table on which the screen will be set 2 Unpack the base one hand hold the monitor the other hand attach the base to the stand 3 Stand the LED LCD Monitor up Disconnecting the stand base 1 Lay the LED LCD Monitor flat on a table with the LED screen face down To prevent the LED LCD Monitor from being scratched put a piece of soft cloth on the table on which the screen will be set 2 Hold the monitor down with one hand With the other hand use two fingers to press the hooks down as directed below 3 Remove the base from the stand Front View of the Product I Rear View of the Product PLANAR a a K Quick Installation 1 Connect either VGA or DVI Source from the monitor to the computer Make sure both monitor and computer are powered OFF 2 Connect power cord to a properly grounded AC outlet and then to the monitor 3 Power ON computer and then POWER ON
11. sure all signal cables are installed Power on but no screen image Make sure the video cable supplied with the LED LCD monitor is tightly secured to the video output port on back of the computer If not tightly secure it Adjust brightness Wrong or abnormal colors if any colors red green blue are missing check the video cable to make sure it is securely connected Loose or broken pins in the cable connector could cause an improper connection Connect the LED LCD monitor to another computer Planar Support Planar Support Tel 1 866 PLANAR1 866 752 6271 or 1 503 748 5799 outside the US Hours 24 hours a day 7 days a week Toll or long distance charges may apply Planar Systems Inc Customer Service 24x7 Online Technical Support http www planar com support 1195 NW Compton Drive Beaverton OR 97006 1992 Tel 1 866 PLANAR1 866 752 6271 or 1 503 748 5799 outside the United States Hours 24 hours a day 7 days a week 2013 Planar Systems Inc Planar is a registered trademark of Planar Systems Inc Other brands and names are the property of their respective owners Technical information in this document is subject to change without notice
Download Pdf Manuals
Related Search