Philips 32PFL3168T 32" HD-ready Black
Contents
1. All other registered and unregistered rademarks are the property of their respective owners Sustainability e Auto switch off To conserve energy set the TV to switch off automatically after a period of inactivity While you watch TV press the Green button and select Auto switch off Then select the period after which the TV switches off e Switch off inactive devices Switch off connected EasyLink HDMI CEC Consumer Electronic Control compliant devices that are inactive While you watch TV press the Green button and select Inactive device off Energy efficiency This TV is designed with energy efficient features To access these features press the Green button on the remote control e Energy saving picture settings You can apply a combination of energy saving picture settings While you watch TV press the Green button and select Energy saving Then select the Energy saving picture setting e Screen off If you only want to listen to audio from the TV you can switch off the TV display Other functions continue to operate normally While you watch TV press the Green button and select Screen off Recycling Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directi2. Note your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging EN 39 English 7 Specifications Power and reception Product specifications are subject to change without notice Power e Mains power AC 220 240 V 50 60 Hz e Standby power consumption lt 0 3 W e Ambient temperature 5 to 40 degree Celsius e For power consumption see the product specifications at www philips com support The power rating stated on the product typeplate is the power consumption for this product during normal household use IEC 62087 Ed 2 The maximum power rating stated between brackets is used for electrical safety IEC 60065 Ed 7 2 Reception e Antenna input 75 ohm coaxial IEC75 e TV system DVB COFDM 2K 8 K e Video playback NTSC PAL SECAM e Digital TV MPEG 4 DVB T Terrestrial DVB T2 DVB C Cable e Tuner bands VHF UHF S Channel yperband Available on certain models only Display and sound Picture Display e Display type LED backlight HD Full HD e Diagonal size 51 cm 20 inches 56 cm 22 inches 61 cm 24 inches 81 cm 32 inches 99 cm 39 inches 102 cm 40 inches 107 cm 42 inches 118 cm 47 inches 127 cm 50 inches e Aspect ratio 4 3 16 9 widescreen EN 40 e Panel resolution 1920x1080p For full HD sets 1366x768p For HD set
3. 1 Press ff 2 Select Setup gt TV settings gt Picture then press OK 3 Select a setting to change then press OK e Picture style Select a predefined picture setting e Restore style Restore the last selected predefined picture setting e 3D backlight contrast Backlight contrast Adjust the brightness of the display backlight e Colour Adjust the colour saturation of the picture e Sharpness Adjust the sharpness of the picture e Noise reduction Select the amount of noise reduction for the picture e MPEG artifact reduction Smoothen transitions and haziness in the digital picture e Digital Crystal Clear Fine tune each pixel to match the surrounding pixels and produce a brilliant high definition image Advanced sharpness Enable superior sharpness especially on lines and contours in the picture Dynamic contrast Dynamically enhance the details in the dark medium and light areas of the picture Dynamic backlight Select a backlight level to optimise dynamic power consumption and picture contrast Colour enhancement Dynamically enhance the vividness and details of colours EN 20 e Advanced Access advanced settings such as gamma tint settings and video contrast settings Gamma Adjust the non linear setting for picture luminance and contrast Tint Change the colour balance Custom tint Customise colour balance setting
4. e Do not drop bend or apply force to he lenses of the 3D glasses e Do not use cleaning chemicals containing alcohol solvent surfactant or wax benzene thinner mosquito repellent or lubricant Using these chemicals can cause discolouration or cracks Placement tips e Position the TV where light does not shine directly on the screen e The ideal viewing distance of this TV is hree times its diagonal screen size For example if the diagonal screen size of he TV is 81 cm 32 the ideal viewing distance is 2 5 m 92 from the front of the screen e While seated your eyes should be level with the centre of the screen TV placement You can apply the best sound settings for your TV by selecting the TV placement wall mount or stand mount 1 Press ff 2 Select Setup then press OK 3 Select TV settings gt General settings or TV placement 4 Select On a TV stand or Wall mounted then press OK Lock the TV Your TV is equipped with a Kensington security slot at the base of the TV To secure the TV purchase a Kensington anti theft lock sold separately Legal Notice 2013 TP Vision Netherlands B V All rights reserved This product was brought to the market by TP Vision Netherlands B V or one of its affiliates hereinafter referred to as TP Vision which is the manufacturer of the product TP Vision is the warrantor in relation to the TV with
5. Only available if Tint gt Custom is selected 3D video contrast Video contrast Adjust video contrast Brightness Adjust screen brightness e Game or computer When viewing content from a connected game console select Game to apply game settings When a computer is connected through HDMI select Computer e Format and edges Access advanced settings to control the display format of the picture Picture format Change the picture format Screen edges Change the picture size Picture shift If available move the position of the picture Sound settings You can change the settings in the Sound menu 1 Press ff 2 Select Setup gt TV settings gt Sound then press OK 3 Select a setting to change then press OK e Sound style Access predefined sound settings e Restore style Restore the last selected predefined sound setting e Bass Adjust the bass level of the speaker and headphones e Treble Adjust the treble level of the speaker and headphones e Surround mode Select a surround sound mode to enhance your audio experience e Headphone volume Adjust headphone volume e Advanced Access advanced settings to enhance your audio experience Auto volume levelling Enable the reduction of sudden volume changes for example when switching channels TV speakers Select the preferred speakers to stream audio from the TV See C
6. Press the Navigation buttons o move around the enlarged view e Reveal Hide or reveal hidden information on a page such as solutions o riddles or puzzles e Cycle subpages If subpages are available each is shown automatically e Language Switch to a different language group to correctly display different character sets Subpages If the text page contains several subpages you can view each subpage in succession These subpages are shown on a bar next to the main page number Press 4 or P to select them Set locks and timers Clock You can display a clock on the TV The clock displays the time that is broadcast by your TV service operator Display the TV clock 1 While you watch TV press OPTIONS 2 Select Clock then press OK The clock is displayed on the top right hand comer of the TV screen Change the clock mode You can change the clock mode to automatic or manual By default it is set to automatic mode which automatically synchronises it to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions change the clock mode to Manual EN 17 English 1 While you watch TV press 2 Select Setup gt TV settings gt General settings 3 Select Clock gt Auto clock mode 4 Select Automatic Manual or Country dependent then press OK Change the time zone In countries with clock transmission data you can change the time zone if
7. switch 11 channels update 22 child lock 18 Cl 36 clock 17 codecs supported 41 Common Interface 36 Conditional Access Module 36 connect computer 33 connect digital camcorder 32 connect digital camera 32 connect disc player 28 connect external hard disk 33 connect game console 31 connect home theatre 31 connect recorder 30 connect TV receiver 29 connect USB device 33 connectivity 42 connectivity guide 8 connectors 27 contact Philips 8 D demo 25 devices watch 34 digital camcorder 32 digital camera 32 digital channels install 22 digital channels subtitles 24 digital radio 11 Q isc player connect 28 display resolutions 40 display specifications 40 E EasyLink 34 EN 8 English EasyLink controls 35 EasyLink enable 34 EasyLink features 34 EasyLink onscreen control 10 EasyLink remote control 35 EasyLink TV speakers 35 Energy label 8 energy efficient settings 7 EPG broadcaster 13 external hard disk 33 F favourite channels list 11 G game console connect 31 H DMI 27 DMI ARC 27 elp version 42 home mode 25 home theatre connect 31 install channels automatic 21 K Kensington lock 5 L language menu 24 language subtitles 24 lock TV 5 M mode home or shop 25 multimedia play fil
8. Hear the TV audio through the connected HDMI ARC compliant device e Off Hear the TV audio through the TV speakers or through a device connected through the digital audio out connector Note Make sure that all HDMI CEC settings are properly set up on the connected device Set up TV speakers 1 Press 2 Select Setup gt TV settings gt Sound gt Advanced gt TV speakers 3 Select an option then press OK e Off Switch off TV speakers e On Switch on TV speakers e EasyLink Switch off TV speakers and stream TV audio to a connected HDMI CEC audio device e EasyLink autostart When a HDMI CEC audio device is connected automatically switch off TV speakers and stream TV audio to the device Change TV audio streaming You can switch audio between TV speakers and a connected amplifier at any time 1 Press OPTIONS 2 Select Picture and sound gt Speakers 3 Select one of the following then press OK e TV On by default Stream TV audio through TV and the connected HDMI CEC audio device until the connected device switches to system audio control TV audio is then streamed through the connected device e Amplifier Stream audio through the connected HDMI CEC device If system audio mode is not enabled on the device audio continues to stream from the TV speakers If EasyLink autostart was selected the TV prompts the connected devic
9. a software update is received you are prompted to update the software We strongly recommend that you update the software when prompted Follow the onscreen instructions If you do not update the TV software when the update is received you are prompted to save the update file To update the software later 1 Press ff 2 Select Setup gt Software settings gt Local updates 3 Select the file that you downloaded and follow the onscreen instructions to complete the update EN 26 Reset all You can reset all picture and sound settings and reinstall all TV channels on your TV 1 Press 2 Select Setup gt TV settings gt General settings gt Reinstall TV then press OK 3 Follow the onscreen instructions 5 Connect your TV About cables Cable quality Before you connect devices to the TV check the available connectors on the device Connect the device to the TV with the highest quality connection available Good quality connectors transfer picture and sound better The connections shown in this user manual are recommendations only Other solutions are possible For more examples visit http www connectivityguide philips com Tip If your device has only composite or RCA connectors use a composite CVBS cable to connect the device to the CVBS Y connector on the TV e Connect HDMI cables shorter than 5 meters 16 4 feet kKkkk HDMI An HD
10. a folder 6 For Safari When the download is complete autorun upg is automatically extracted from the ZIP file to your computer Copy the file to the USB flash drive Do not copy or place the file into a folder 7 Eject and disconnect the USB flash drive from the computer EN 25 English Upgrade the TV software Caution e Do not switch off the TV or remove he USB flash drive during the software upgrade e Ifa power failure occurs during the upgrade do not remove the USB flash drive from the TV The TV continues he upgrade as soon as power is restored e If an error occurs during the upgrade retry the upgrade from the beginning If he error reoccurs contact Philips TV Consumer Care 1 Remove all USB devices such as a Wi Fi adapter from the TV then switch on the TV 2 Connect the USB flash drive to the TV The software upgrade starts automatically The upgrade is complete when a notification message appears on screen 3 Before you restart the TV disconnect the USB flash drive from the TV 4 Press on the remote control do not press more than once The TV switches off then back on again The upgrade is complete 5 To prevent accidental updates to the TV software reconnect the USB flash drive to your computer and delete autorun upg Update from digital broadcast When available the TV can receive software updates through digital broadcasts When
11. a full installation of channels was performed To change your language country and reinstall all available TV channels you can run this full installation again Start installation Note If you are prompted to enter a code enter 8888 1 Press 2 Select Setup gt Search for channels gt Reinstall channels then press OK 3 Select your country then press OK 4 Select your network then press OK e Antenna DVB T Access free to air antenna transmissions e Cable DVB C Access cable transmissions 5 Follow the onscreen instructions to select other options if any The start menu for channel search is displayed 6 Select Start then press OK 7 Once the channel search is complete select Finish then press OK Tip Press LIST to see the channel list Note When digital TV channels are found the list of installed channels may display empty channel numbers You can rename these channels EN 21 English Install analogue channels You can search and store analogue TV channels one by one Step 1 Select your system Note Skip this step if your system settings are correct 1 While you watch TV press 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual installation gt System then press OK 4 Select the system for your country or region then press OK Step 2 Search and store new TV channels 1 While you wa
12. as new channel Store the channel under a new channel number Install digital channels If you know the channel frequency of the channels you want to install you can search and store digital channels one by one For best results contact the service provider 1 Press f 2 Select Setup gt Channel settings gt Channel installation EN 22 Update channel list When the TV was switched on for the first time a full installation of channels was performed By default when there are changes to these channel lists the TV updates them automatically You can also switch off the automatic update or manually update the channels Note If you are prompted to enter a code enter 8888 Automatic update To add or remove digital channels automatically leave the TV in standby mode The TV updates channels and stores new channels everyday Empty channels are removed from the channel list Switch off the channel update message If a channel update is performed a message is displayed at startup You can switch off this message 1 Press f 2 Select Setup gt Channel settings 3 Select Channel installation gt Channel update message 4 Select Off then press OK Switch off automatic updates In the Channel installation menu select Automatic channel update gt Off Update channels manually 1 Press ff 2 Select Setup gt Search for channels gt Update channels then pres
13. images such as the background appearing nearer to you Convert 2D to 3D You can convert any 2D programme to watch it in 3D 1 Press OPTIONS 2 Select Picture and sound gt 3D settings gt 2D to 3D conversion To adjust the 3D depth 1 Press OPTIONS 2 Select Picture and sound gt 3D effect 3 Select an option then press OK To switch off 2D to 3D conversion 1 Press OPTIONS 2 Select Picture and sound gt 3D settings gt 2D then press OK Note If you switch to another activity the conversion stops Play multimedia files What you can do You can play videos photos music and text files on your TV from a USB device connected to the TV Play files from USB device If you have photos videos or music files on a USB storage device you can play the files on TV Caution e TP Vision is not responsible if the USB hard drive is not supported nor is it responsible for damage to or loss of data in the device e Do not overload the USB port If you connect a USB storage device that consumes more than 500mA power make sure that it is connected to its own external power supply Browse USB device 1 Connect the USB device to the USB connector on the TV 2 Press SOURCE select USB then press OK 3 Select a file from the content browser then press OK to start play 4 Press the Play buttons to control play Tip e Select any of the options on t
14. this manual or any adjustments and assembly procedures no recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD LED product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction CE compliance This product is in compliance with the essential requirements and other relevant provisions of Directives 2006 95 EC Low Voltage 2004 108 EC EMC and 2011 65 EU ROHS EN 6 Compliance with EMF TP Vision manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of TP Vision s leading Business Principles is to take all necessary health and safety measures for the products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing the products TP Vision is committed to developing producing and marketing products that cause no adverse health effects TP Vision confirms hat as long as its products are handled properly for their intended use they are safe o use according to scientific evidence available today Philip
15. Auto clock mode gt Automatic or Country dependent is selected 1 In the Clock menu select Time zone 2 Select your time zone then press OK Set daylight saving time In countries with clock transmission data you can enable or disable daylight saving time if Auto clock mode gt Automatic or Country dependent is selected 1 In the Clock menu select Daylight saving 2 Select Standard time or Daylight saving time then press OK Set the clock manually You can set the date and time manually Before you start set the clock mode to Manual 1 In the Clock menu select Date or Time then press OK 2 Set the time or date with the Navigation buttons 3 Select Done then press OK Only available in certain countries 4 Press OK to activate the sleeptimer After the specified time the TV switches to standby Child lock To protect children from unsuitable TV programmes you can lock the TV or block age rated programmes Set or change the child lock code 1 Press ff 2 Select Setup gt Channel settings gt Child lock 3 Select Set code or Change code 4 Enter the code with the Numeric buttons Tip If you access the channels from the channel list you are prompted to enter your lock code If you forget your code enter 8888 to override any existing codes Lock or unlock channels 1 In the child lock menu select Channel lock 2 Enter the
16. DMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If an HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted increased or decreased When a HDMI CEC audio device is connected this behaviour is normal USB device content is not displayed ake sure that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation ake sure that the USB storage device is compatible with the TV ake sure that the audio and picture file formats are supported by the TV Audio and picture files on your USB storage device do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback Contact Philips Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty If are not able to resolve your problem refer to the frequently asked questions FAQs for this TV at www philips com support You can also consult and contribute to the Philips TV community at www supportforum philips com If you wish to speak to or email a Philips representative contact the Philips Consumer Care in your country You can find the contact details in the leaflet accompanying this TV or at www philips com support
17. MI connection has the best picture and sound quality e An HDMI cable combines video and audio signals Connect HDMI for high definition HD TV signals and to switch on EasyLink e An HDMI Audio Return Channel ARC connector allows output of TV audio to an HDMI ARC compliant device SCART A SCART connection combines video and audio signals SCART connectors can handle RGB video signals but cannot handle high definition HD TV signals xk VGA For certain sets only You can connect VGA to display PC content on the TV VGA only transmits video For sound also connect to AUDIO IN EN 27 English Connect antenna Connect the antenna to the TV ma 150 TV ANTENNA M J Connect devices Blu ray or DVD disc player Connect the disc player to the TV with an HDMI cable EN 28 TV receiver Connect the digital TV receiver with an antenna cable to the TV pN A z oe E TVANTENNA a T Connect the digital TV receiver to the TV with an HDMI cable OO N Connect the digital TV receiver to the TV with a SCART cable EN 29 English Video recorder Connect the recorder to the TV with an antenna cable A K UF TVANTENNA EE Connect the recorder to the TV with an HDMI cable ah md J S E Connect the recorder to the TV with a SCART cable gsc 30 Game console Connect the game conso
18. Register your product and get support at www philips com welcome PFL3xx8H T PFL4398H T EN User Manual PHILIPS Contents Specifications Power and reception Display and sound Display resolutions Multimedia Connectivity Help version 40 EN 1 Important 3 Safety 3 Care 4 Legal 3 Sustainability 7 Help and support 8 2 Use your TV 9 TV controls 9 Watch TV 10 View programme guide 13 Watch 3D 13 Play multimedia files 15 3 Use more of your TV 17 View Text 17 Set locks and timers 17 4 Change your TV settings 20 Picture and sound 20 Channels 21 Language settings 24 Other settings 25 Update software 25 Reset all 26 5 Connect your TV 27 About cables 27 Connect antenna 28 Connect devices 28 Connect more devices 33 Watch connected devices 34 Set up EasyLink devices 34 Connect a CAM Conditional Access Module 36 6 Troubleshooting 37 General issues 37 Channel issues 37 Picture issues 38 Sound issues 38 Connection issues 39 Contact Philips 39 Index f wWNN gt O0OO0O 1 Important Safety Precautions Read and understand all instructions before you use your TV If damage is caused by failure to follow the instructions the warranty does not apply Risk of electric shock or fire ever expose the TV to rain or water ever place liquid containers such as vases near the TV If liquids are spilled on or into he TV disconnect the TV from the power outlet immediatel
19. Switch TV to standby Press on the remote control The standby LED on the TV switches to red Switch off the TV Press on the TV The standby LED switches to off Note Though your TV consumes very little energy when it is in standby or switched off does use some energy If you are not going to use the TV for an extended period of time disconnect the TV from the mains plug Switch TV on or off am EN 10 Adjust TV volume SM Increase or decrease the TV volume e Press on the remote control Mute or restore the TV volume e Press amp on the remote control to mute the volume e Press amp again to restore the volume Adjust headphone volume 1 Press ff 2 Select Setup gt TV settings gt Sound gt Headphone volume then press OK 3 Select a level Switch TV channels e Press CH on the remote control e Press the Numeric buttons to enter a channel number Manage favourite channels You can view all channels or only a list of your favourite channels Create a list of your favourite channels 1 Press LIST The channel list is displayed 2 Select the channel to mark as favourite then press OPTIONS 3 Select Add remove favourites then press OK The selected channel is marked with an asterisk To remove a channel from the favourites list select Add remove favourites then press OK Display your list of favourite
20. USB storage device 5 Disconnect the USB storage device Step 3 Copy channels to a TV with no channels installed 1 Switch on the second TV on which you want to copy the channel list Initial installation starts 2 Follow the onscreen instructions and select the same country as the TV whose channel list you want to copy 3 Skip the search for channels 4 Connect the USB storage device 5 Press ff 6 Select Setup gt Channel settings 7 Select Channel installation gt Copy channel list gt Copy to TV then press OK The channel list is copied to the TV storage device 8 Disconnect the USB storage device Step 3 Copy channels to a TV with pre installed channels 1 Switch on the second TV on which you want to copy the channel list 2 Press f 3 Select Setup gt Search for channels gt Reinstall channels then press OK The country menu is displayed EN 23 English 4 Make sure that the country setting is the same as for the first TV 5 Press D 6 Press Cancel to exit 7 If the country setting is different reinstall the second TV to match the country setting of the first TV See Change your TV settings gt Reset all Page 26 8 Connect the USB storage device to the second TV 9 Press f 10 Select Setup gt Channel settings 11 Select Channel installation gt Copy channel list gt Copy to TV then press OK The channel list is copied t
21. al is detected 1 Press ff 2 Select Setup gt TV settings gt 3D gt Switch to 3D 3 Select a setting then press OK e Automatic TV switches to 3D automatically e Notification only TV displays notification first e Never No notifica on Select a source with 3D For 3D discs 1 Play the disc on a 3D Blu ray disc player that is connected to the TV HDMI connector 2 Press SOURCE then select the 3D Blu ray disc player For 3D TV programmes 1 Select Watch TV then switch to a TV channel that broadcasts 3D content Note e To switch back to 2D press OPTIONS Select Picture and sound gt 3D settings gt 2D e If you switch to another channel or a connected device the TV switches to 2D Select 3D input format The TV detects when 3D is available and prompts you to put on your 3D glasses to start watching If the TV cannot detect the 3D signal due to a missing 3D signal tag displays images that overlap EN 14 To switch the overlapping images to 3D change the 3D format 1 Press OPTIONS 2 Select Picture and sound gt 3D settings 3 Select a setting then press OK e 3D Side by side Select if the TV displays pictures that overlap vertically e 3D Top bottom Select if the TV displays pictures that overlap horizontally e 3D top bottom inverted or 3D side by side inverted Select if the TV displays distorted
22. ast 4 inches or 10 cm around the TV for ventilation Ensure that curtains or other objects never cover the ventilation slots on the TV Risk of injury fire or power cord damage e Never place the TV or any objects on the power cord e Disconnect the TV from the socket and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable Risk of hearing damage e Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures e Ifthe TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting he TV to the power outlet e To avoid discomfort such as dizziness headache or disorientation we recommend not watching 3D for extended periods of time If you experience any discomfort stop watching 3D and do not immediately engage in any potentially hazardous activity for example driving a car until your symptoms have disappeared If symptoms persist do not resume watching 3D without consulting a medical professional first e Parents should monitor their children during 3D viewing and ensure they do not experience any discomfort as mentioned above Watching 3D is not recommended for children under six years of age as their visual system is not fully developed yet e Do not use the 3D glasses for any purpose other than wat
23. channels 1 Press LIST then press OPTIONS 2 Select List gt Favourites to display channels in the favourite list 3 Press OK to confirm Reorder your list of favorite channels 1 While your list of favorite channels is displayed press OPTIONS 2 Select Reorder then press OK 3 Select the channel to reorder then press OK 4 Press the Navigation buttons to move the highlighted channel to another location then press OK 5 Once complete press OPTIONS 6 Select Exit reorder then press OK Manage channel lists After the channels are installed you can e Filter channels e Switch between antenna and cable channels e Rename channels e Lock a channel e Listen to digital radio Filter channels 1 While you watch TV press LIST 2 Press OPTIONS then select Filter 3 Select an option then press OK e Digital Analogue Display all channels in the channels list e Digital TV channels Display only digital channels e Analogue Channels Display only analogue channels e Free scrambled Display all channels in the channels list e Free channels Display only free channels e Scrambled channels Display only scrambled channels Note The filtering options may vary according to your broadcaster Switch between antenna and cable channels You can switch between antenna and cable channels while you are watching TV 1 While you watch TV p
24. child lock code with the Numeric buttons 3 Select the channels to lock or unlock Restart the TV to activate the lock Note If you access the channels from the channel list you are prompted to enter your lock code Sleep timer You can switch the TV to standby after a specified time During the countdown to the specified time you can switch off your TV earlier or reset the sleep timer 1 Press ff 2 Select Setup gt TV settings gt General settings gt Sleep timer 3 Select the sleep timer duration The sleep timer can be set up for to 180 minutes To switch off the sleep timer set it to zero minutes EN 18 Parental rating You can set your TV to display only programmes with age ratings lower than your child s age This restriction only applies to digital channels from broadcasters that rate their programmes according to age 1 Press ff 2 Select Setup gt Channel settings 3 Select Child lock gt Parental rating You are prompted to enter the child lock code 4 Enter the child lock code with the Numeric buttons 5 Select an age rating then press OK All programmes above the selected age rating are blocked For information on child lock codes see Use more of your TV gt Set locks and timers gt Child lock Page 18 EN 19 English 4 Change your TV settings Picture and sound Picture settings You can change the settings in the Picture menu
25. ching this 3D TV Care 3D health warning For 3D TVs only e If you or your family have a history of epilepsy or photosensitive seizures consult a medical professional before exposing yourself to flashing light sources rapid image sequences or 3D viewing EN 4 Screen e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth and wipe gently Never use substances such as alcohol chemicals or household cleaners on the TV e To avoid deformations and colour fading wipe off water drops as soon as possible e Avoid stationary images as much as possible Stationary images are images hat remain onscreen for extended periods of time Stationary images include onscreen menus black bars ime displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage 3D glasses For sets with 3D glasses supplied Follow these instructions to take care of your glasses e Use a clean soft cloth microfibre or cotton flannel to clean the lenses to avoid scratching them Never spray cleaner directly on the 3D glasses You can use pre moistened cleaning cloths from most well known lens manufacturers of sunglasses e Do not expose the 3D glasses to direct sunlight heat fire or water This may result in a product malfunction or fire
26. duct on the Philips website for your country at www philips com TV Help and support Visit the Philips website For more information visit the Philips support website at www philips com support On the Philips support website you can also e Find answers to Frequently Asked Questions FAQ e Download a printable PDF version of this user manual e Email us a specific question e Chat online with Philips TV Consumer Care available in certain countries only EN 8 Contact Philips You can contact Philips TV Consumer Care in your country for support The number is available in the leaflet accompanying this product or online at www philips com support Before you contact Philips write down the model and serial number of your TV You can find this information on the back of your TV or on the TV packaging 2 Use your TV TV controls Sensors and indicators 1 Standby indicator LED and remote control sensor The standby LED indicates when your TV is in standby Point the remote control at the sensor Make sure that the line of sight between the remote control and the TV is not blocked Remote control 1 Standby Switch the TV on or to standby 2 Play buttons Control playback of media files 3 SOURCE Access a connected device 4 FORMAT Change picture format 5 CATV Switch source to watch TV 6 ft Home Access the Home menu 7 ae Confir
27. e TV and all HDMI CEC compliant devices switch to standby mode EasyLink remote control You can control multiple HDMI CEC compliant devices with your TV remote control System audio control If you connect an HDMI CEC compliant device that includes speakers through the HDMI ARC connector you can choose to hear the TV audio from those speakers instead of the TV speakers What you can do You can get the most out of your HDMI CEC compliant devices with Philips EasyLink enhanced control features Connect your DMI CEC compliant devices through DMI to your TV and control them at the same time with your TV remote control Note Other brands describe HDMI CEC functionality differently Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink After you have switched on Philips EasyLink he following features are available EN 34 What you need e Connect an HDMI CEC compliant device to the TV You can connect more than one HDMI CEC device See Connect your TV gt Connect devices Page 28 e Configure each HDMI CEC compliant device properly e Switch on EasyLink Switch on EasyLink 1 Press 2 Select Setup gt TV settings gt General settings gt EasyLink 3 Select EasyLink gt On then press OK Control devices If you connect multiple HDMI CEC devices that sup
28. e channel is equal or higher than the age rating set on your TV e the channel is locked From the broadcaster Access broadcaster programme guide 1 Press ff 2 Select TV guide then press OK 3 If you are viewing the programme guide for the first time follow the onscreen instructions to update the guide Customise broadcaster programme guide You can customise the displayed information to e Remind you when programmes start e Display only preferred channels e Change day of display Note Options may vary according to the programme information available from the broadcaster What you need For certain models only Your TV is a 3D TV Before you watch 3D read the health warning information in Important gt Safety gt 3D health warning Page 4 To watch 3D on this TV use the Philips passive 3D glasses supplied with your TV Note e If you need additional 3D glasses ensure you purchase Philips passive 3D glasses 3D glasses from other brands may reduce or lose the 3D effect e Some 3D formats are not supported To experience the best 3D effect while you watch 3D programmes EN 13 English e Sit at a distance that is at least three times the width w of the TV screen Do not sit more than 6 m away Start 3D Automatically enable 3D The TV detects when 3D is available and prompts you to put on your 3D glasses to start watching To set the TV response when a 3D sign
29. e owners Specifications are subject to change without notice Ory Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N V and are used under license from Koninklijke Philips N V 2013 TP Vision Netherlands B V All rights reserved www philips com
30. e to switch to system audio mode EN 35 English Connect a CAM Access CAM services oo 1 After you insert and activate the CAM Conditional Access press OPTIONS Module 2 Select Common interface then press OK 3 Select the CAM provider then press OK What you can do You can watch scrambled digital TV channels with a Conditional Access Module CAM Once you have inserted the CAM and paid the subscription fees you can watch the programmes This TV supports Cl Common Interface as well as Cl Cl supports premium HD digital programmes with a high level of copy protection Note The applications functions content and onscreen messages depend on the CAM service provider What you need Caution To protect the CAM from damage insert the CAM as instructed Note Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module 1 Switch off the TV 2 Follow the directions printed on the CAM to insert the CAM into the Common Interface slot at the side of the TV Push the CAM in as far as it will go 3 Switch on the TV then wait for the CAM to be activated This takes a few minutes To maintain access to encrypted digital TV channels leave the CAM in the slot EN 36 6 Troubleshooting General issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnec
31. es 15 multimedia play options 15 EN 44 mu O onl P pICI pict U ren Itimedia supported formats 41 ine forum 8 parental rating 18 PC display resolutions 40 ture format 12 ture settings reset 21 placement stand or wall 5 placement tips 5 ay USB files 15 power specifications 40 presets picture and sound 12 product support 8 programme guide broadcaster 13 R recorder connect 30 recycle 7 reinstall 26 remote control 9 ame channels 11 safety 3 SCART 27 screen care 4 sen sors 9 settings audio format 21 shop mode 25 sleep timer 18 soft ware check version 25 soft soft ware digital update 26 tware USB update 25 sound settings reset 21 sound specifications 40 source select 12 standby 10 standby LED 9 subtitles analog 24 subtitles digital 24 subtitles language 24 sustainability 7 switch TV on off 10 T ext 2 5 17 ext dual screen 17 ext enlarge 17 ext language 17 ext subpages 17 ext Table Of Pages 17 rademarks and copyrights 7 TV guide broadcaster 13 TV receiver connect 29 TV speakers mute 10 U USB play files 15 V VGA 27 volume 10 EN 45 English PHILIPS All registered and unregistered trademarks are the property of their respectiv
32. ews Ideal settings for spoken audio such as the news Change picture format You can change the picture format to suit the video source 1 Press amp FORMAT 2 Select a picture format then press OK The available picture formats depend on the video source e Auto Adjust the picture format according to the input source e Super zoom Remove the black bars on the sides of 4 3 broadcasts Not recommended for HD or PC e Movie expand 16 9 Scale 4 3 format o 16 9 Not recommended for HD or PC e Wide screen Shows widescreen format content unstretched Not recommended for HD or PC e Unscaled Provide maximum detail for PC Only available when PC mode is selected in the Picture menu e 4 3 Display the classic 4 3 format View programme guide 1 In the programme guide press OPTIONS 2 Select an option then press OK e Update TV guide Update programme guide information e Change day Select the day to display programme guide e Search by genre Search programmes by genre e All reminders Display a list of all programme reminders Watch 3D What you can do You can view channel schedules and programme synopses for digital TV channels using programme guides provided by the broadcasters The availability of programme guides is dependent on your broadcaster You cannot view a channel s programme guide information if e the age rating of th
33. guage for digital channels 1 While you watch TV press OPTIONS 2 Select Subtitle language then select from the available languages and press OK The subtitle language is changed for the specific channel You can set your preferred primary and secondary subtitle languages to display when available 1 While you watch TV press 2 Select Setup gt Channel settings gt Languages 3 Select Primary subtitle language or Secondary subtitle language and select from the available languages 4 Press OK to confirm Other settings TV demo You can watch a demo to find out more about the features on this TV 1 While you watch TV press 2 Select Setup gt Watch demo then press OK 3 Select a demo then press OK Home mode Some TV settings may not be available in Shop mode To make sure that the correct TV settings are applied set the TV to Home mode 1 While you watch TV press 2 Select Setup then press OK 3 Select TV settings gt General settings gt Location 4 Select Home or Shop then press OK 5 Restart the TV Update software Check version 1 Press ff 2 Select Setup gt Software settings gt Current software inf then press OK The current software version is displayed Caution Do not install a lower version of software than the current version installed on your product TP Vision cannot be held liable or be made responsib
34. he left of the content browser to filter your files by type To select a different USB device 1 Press SOURCE then select USB 2 Select the USB device to browse and press OK Play options Watch video Press the Navigation buttons to select a video file then press OKto control play e Press 9 to exit the content browser e To search forward or backwards press PP or 44 Press the button repeatedly to toggle between different speeds e To stop the video press I Video options While you play video press OPTIONS then press OK to select an option e Subtitles Select the available subtitle settings e Subtitle language Select the language for subtitles if available e Audio language Select an audio language e Repeat Select Repeat to play the video file repeatedly or Play once to play the video file once e Shuffle on Shuffle off Enable or disable random play of video files e Show info View information about a video Note To view information about a video for example played position duration title or date select the video then press INFO To hide the information press INFO again Listen to music Press the Navigation buttons to select a video file then press OK to control play e Press to exit content browser e To search forward or backwards press PP or 44 Press repeatedly to toggle between different speeds e To stop the music press Hi
35. inking reoccurs contact Philips Tv Consumer Care The TV audio is in the wrong language f you select audio language via OPTIONS he TV resets to the default language when you change channels or switch off the TV To retain the selected language change your audio language by pressing then selecting Setup gt Channel settings gt Languages gt Primary audio language or Secondary audio language The TV or Smart TV menu is in the wrong language Change the menu to your preferred language For more information see Change your TV settings gt Language settings gt Menu language Page 24 You forgot the 4 digit code to unlock the channel blocking feature child lock Enter 8888 You want to upgrade your TV software Visit www philips com support and download the latest software package for your TV Software installation instructions and release notes indicating what s been updated are also available at the site Full instructions on how to upgrade your TV software are also available at Change your TV settings gt Update software Page 25 Channel issues You want to install TV channels See Change your TV settings gt Automatic installation Page 21 for instructions on installing analogue or digital channels No digital channels were found during the installation e See the technical specifications to make sure that your TV supports DVB T or DVB C in your country EN 37 Engli
36. l Music options While you play music press OPTIONS then press OK to select an option e Repeat Select Repeat to play a track or an album repeatedly or select Play once to play a track once e Shuffle on Shuffle off Enable or disable random play of tracks e Show info View information about a song Note To view information about a song for example title artist or duration select the song then press GJ INFO To hide the information press INFO again EN 15 English View pictures Press the Navigation buttons to select a picture then press OK to start the slideshow e Press Navigation buttons to search for a picture e Press 9 to exit content browser Slideshow options While you play a slideshow press OPTIONS then press OK to select an option e Slideshow frequency Select the display time for each picture in the ideshow Slideshow transitions Select the ransition from one picture to the next Repeat Select Repeat to watch a slideshow repeatedly or Play once to watch once e Shuffle on Shuffle off Enable or disable random display of pictures in the slideshow e Rotate image Rotate the picture e Show info View information about a picture Note mgomo To view information about a picture for example title album date file size or name of the next picture select the picture then press INFO To hide the inf
37. le for problems caused by a software downgrade Update the software through one of these methods e update with USB storage device e update from digital broadcast Update with USB What you need e A USB storage device that has at least 256 megabytes of storage space is FAT or DOS formatted and has its write protection disabled e Access to a computer with a USB connector and Internet access e A file archiver program that supports the ZIP file format for example WinZip for Microsoft Windows or Stufft for Macintosh Note Do not use a USB hard drive Download the latest software 1 Connect the USB flash drive to your computer 2 On your computer launch a browser such as Internet Explorer or Safari and see www philips com support 3 Find your TV and locate the software and drivers available for your TV set The software upgrade is available as a compressed file zip 4 If the software version is higher than the version on your TV click the software upgrade link 5 Accept the licence agreement and download the ZIP file to the USB flash drive Note Some Internet browsers such as Mozilla Firefox or Google Chrome may download the ZIP file directly to your computer If this happens copy the file to your USB flash drive 6 For Internet Explorer Using a file archiver extract autorun upg from the downloaded ZIP file Do not copy or place the extracted file into
38. le to the TV with an HDMI cable Home theatre Connect an HDMI ARC compliant home theatre to the TV with an HDMI cable E II Tf neil me Llall E RK cS Limit a is _ 7 OON pen Til EN 31 English Connect the home theatre to the TV with a SCART cable Digital camera Connect the digital camera to the TV with a USB cable ete Digital camcorder Connect the digital camcorder to the TV with an HDMI cable Lc EN 32 Connect more devices USB storage device Connect the USB flash drive with a USB cable to the TV I Connect the USB hard drive to the TV with a USB cable Computer Connect the computer to the TV with an HDMI cable EN 33 English For certain sets only Connect the computer with a DVI HDMI cable and an audio cable to the TV Er DVI VGA Watch connected devices Select a device Before you can watch a device connect the device to the TV See Connect your TV gt Connect devices Page 28 Select a device with SOURCE 1 Press 3 SOURCE 2 Select a device then press OK Select a device from Home menu 1 Press 2 Select Source then press OK 3 Select a device then press OK Set up EasyLink devices m l One touch play When you play an HDMI CEC compliant device the TV switches on from standby and switches to the correct source One touch standby When you press on the TV remote control th
39. m an entry or selection 8 AV4 P Navigation buttons Navigate through menus and select items 10 em 12 oe 9 LIST Access the TV channel list 10 INFO Display information about current activity 11 tt ADJUST Adjust TV settings 12 G OPTIONS Access currently available options 13 EN 9 English 13 Back Return to the previous menu page or exit from a TV function 14 CH CH Switch channels 15 Volume Adjust volume 16 amp Mute Mute or restore audio i et P 17 ADDR 7 fo gt n aa 1 e 2 asc oer 3 4 GH ie JKL 19 EET 18 20 17 Colour buttons Select tasks or options The buttons function according to the services offered by the service provider 18 SUBTITLE Switch subtitles on or off 19 0 9 Numeric buttons Select TV channels or enter text 20 TEXT Enable or disable text EasyLink controls If you connect your TV to HDMI CEC enabled devices such as a Blu ray player or home theatre you can control them at the same time with one remote control Simply switch on EasyLink after connection Watch TV Switch the TV on e Connect the TV to the mains outlet and switch on the main power e Ifthe standby LED is lit press on the remote control Note There is a short delay before the TV responds Tip If you cannot find your remote control and want to switch on the TV from standby press on the TV
40. ngs are set correctly EN 38 The TV did not save your picture settings Make sure that the TV location is set to Home You can change and save settings in this mode The picture does not fit the screen it is too big or too small Change to a different picture format The picture format keeps changing with different channels Instead of the picture format Auto select a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambled You may need a Conditional Access Module to access content Check with your service operator An e sticker banner displaying information appears on the TV display The TV is in Shop mode To remove the e sticker set the TV to Home mode then restart the TV See Change your TV settings gt Other settings gt Home mode Page 25 The computer display on the TV is not stable e Make sure that your PC uses the supported resolution and refresh rate See Specifications gt Display resolutions Page 40 e Change the TV picture format to Unscaled Sound issues There is a picture but sound quality is poor If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Make sure that all cables are properly connected e Make sure that the volume is not m
41. nnel e DIGITAL AUDIO OUT SPDIF e USB 32 39PFL3xx8H T and 39PFL4398H T Left side connectors e Cl Common Interface 40 50PFL3xx8H T and 42 47PFL4398H T Rear connectors e HDMI 1 ARC HDMI Audio Return Channel e HDMI 2 e HDMI 3 For certain sets only e USB 2 For certain sets only e AUDIO IN DVI Stereo 3 5 mm mini jack e SERV U Service port e DIGITAL AUDIO OUT SPDIF e TV ANTENNA 75 ohm coaxial IEC e Headphones 3 5 mm mini jack e SCART RGB CVBS SCART adaptor 40 50PFL3xx8H T and 42 47PFL4398H T Side connectors e Cl Common Interface e USB USB1 Help version UMv 318812133504 20130906 EN 42 8 Index 3 D 13 3 3D glasses care 5 3D 2D to 3D 14 3D change format 14 3D health warming 4 3D start 14 3D switch off 14 A amplifier select output 35 analogue channels fine tune 22 analogue channels install 22 analogue channels subtitles 24 audio language 24 Auto switch off devices 35 C cables 27 CAM 36 CAM enable 36 CAM insert 36 channel list 11 channel list copy 23 channels 11 channels favourites 11 channels fine tune analogue 22 channels hide or unhide 11 channels install analogue 22 channels install automatic 21 digital 22 channels logo 11 channels insta channels reinstall 26 channels rename 11 channels sort 11 channels
42. o the second TV 12 Disconnect the USB storage device Language settings 1 While you watch TV press 2 Select Setup gt Channel settings gt Languages 3 Select Primary audio language or Secondary audio language and select from the available languages 4 Press OK to confirm Subtitles on analogue channels 1 While you watch an analogue TV channel press TEXT 2 Enter the three digit page number of the subtitles page which is usually 888 If available subtitles are switched on Menu language 1 While you watch TV press 2 Select Setup gt TV settings gt General settings gt Menu language 3 Select a menu language from the list then press OK Subtitles on digital channels 1 While you watch a digital TV channel press OPTIONS 2 Select Subtitles then press OK 3 Select Subtitles off Subtitles on or Automatic then press OK Audio language If the TV channel broadcasts multiple or dual audio languages you can select your preferred audio language 1 While you watch TV press OPTIONS 2 For digital channels select Audio language For analogue channels select Dual I Il Press OK to confirm your selection 3 Select from the available languages then press OK You can set your preferred primary and secondary audio languages to hear when available EN 24 Subtitle language When available you can change the subtitle lan
43. onnect your TV gt Set up EasyLink devices gt Select speaker output Page 35 Clear Sound Enhance sound quality Audio Out format Select the type of audio output through the digital audio output connector Choose between Multichannel and Stereo Available on certain models only HDMI 1 ARC Enable audio output from the ARC compliant device connected to the HDMI 1 connector Audio out delay Automatically sync the image on the TV to the audio from a connected home theatre You do not need to use this setting when connecting the TV to a Philips home theatre Audio out offset Adjust the setting for audio output delay Available if Audio out delay is switched on Reset picture and sound You can restore the default picture and sound settings while the channel installation settings remain the same 1 While you watch TV press 2 Select Setup gt TV settings gt General settings gt Factory settings then press 3 Select Reset then press OK All TV settings except for channel settings are reset to the default factory settings Channels Audio format If an analogue TV channel broadcaster streams stereo audio in multiple formats you can select an audio format 1 Press ff 2 Select Setup gt Channel settings gt Mono Stereo 3 Select a setting then press OK Automatic installation When the TV was switched on for the first time
44. ormation press INFO again EN 16 3 Use more of your TV View Text e Text 2 5 View text with more colours and better graphics than normal text If Text 2 5 is broadcast by a channel it is switched on by default Select a page While you watch channels that broadcast text you can view the text 1 Select a channel that broadcasts text then press TEXT 2 Select a page in one of the following ways e Enter the page number with the Numeric buttons e Press CH CH to view the next or previous page e Press the Colour buttons to select a colour coded item Text language For digital TV channels where the broadcasters provide different text languages you can select your preferred primary and secondary languages 1 Press ff 2 Select Setup gt Channel settings 3 Select Languages gt Primary Text or Secondary Text 4 Select a language then press OK Text options 1 While you view text press OPTIONS 2 Select an option e Freeze page Unfreeze page Freeze or unfreeze the current page e Dual screen Full screen Enable or disable dual screen text Dual screen displays both the current channel and he text broadcast on two halves of the TV screen e T O P overview Table Of Pages T O P text broadcasts allow you to jump from one subject to another without entering page numbers e Enlarge Normal view Zoom in on he page
45. port this setting you can control all such devices through the TV remote control Note This is an advanced setting Devices that do not support this setting cannot respond to the TV remote control 1 Press f 2 Select Setup gt TV settings gt General settings gt EasyLink gt EasyLink remote control 3 Select On or Off then press OK Tips e To switch back to TV control press then select TV e To control another device press then select the device from the Home menu EasyLink buttons You can control HDMI CEC complian devices with the following buttons on the TV remote control e Switch the TV and the connected device on or to standby e Play buttons Control video or music play e Numeric buttons Select a title chapter or track e OK Start pause or resume play on the connected device activate a selection or access the device menu e ft Display the TV Home menu Select speaker output If a connected device is HDMI Audio Return Channel HDMI ARC compliant you can output TV audio through an HDMI cable Additional audio cables are not required Make sure you connect the device to the HDMI ARC connector on the TV See Connect your TV gt About cables gt HDMI Page 27 Switch on HDMI ARC 1 Press ff 2 Select Setup gt TV settings gt Sound gt Advanced gt HDMI 1 ARC 3 Select one of the following then press OK e On
46. ress 2 Select Setup gt Channel settings gt Channel installation gt Antenna connection 3 Select Antenna DVB T to watch antenna channels or Cable DVB C to watch cable channels then press OK Rename channels When you select a channel its name appears You can change this channel name 1 While you watch TV press LIST The channel list is displayed 2 Select the channel to rename then press OPTIONS EN 11 English 3 Select Rename then press OK The onscreen keyboard is displayed 4 Press the Navigation buttons to select each character then press OK 5 Once complete select Done then press OK to confirm Lock a channel You can prevent unauthorised access to channels by locking them 1 While you watch TV press LIST The channel list is displayed 2 Select the channel to lock then press OPTIONS 3 Select Lock channel then press OK 4 If prompted enter the PIN code The channel is marked with a lock icon in the channels list Tip To watch a locked channel enter the PIN code when prompted Listen to digital radio If digital radio channels are available you can listen to them They are installed automatically when you install the TV channels 1 While you watch TV press LIST The channel list is displayed 2 Press OPTIONS 3 Select Filter gt Radio then press OK 4 Select a radio channel then press OK Watch connected de
47. s e Picture enhancement Digital Crystal Clear e 3D For certain sets only Sound e Output power RMS 10 THD 32 40 PFL3168 PFL3178 PFL3188 PFL3198 and PFL4398 10W 32 40 PFL3088 PFL3138 and PFL3148 8W 42 PFL3168 PFL3188 PFL3178 98 and PFL4398 16W 47 50 PFL3168 PFL3178 88 PFL3198 and PFL4398 20W 47 50 PFL3088 PFL3138 and PFL3148 20W ncredible Surround PFL3 PFL3 e Clear Sound ono Stereo Available on certain models only Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 X 720 60 1280 X 768 60 z 1280 x 1024 60 Hz 1360 x 768 60 Hz For Full HD TV only 1680 x 1050 60 Hz 1920 x 1080 60 Computer formats VGA Resolution refresh rate 640 x 480 60 800 x 600 60 Z zZ 1024 x 768 60 Z 1280 x 1024 60 Hz 1360 x 768 60 zZ For Full HD TV only 1600 x 1200 60 Hz 1920 x 1080 60 Hz Video formats Resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50Hz 60 Hz 1080i 50Hz 60 Hz 1080p 24Hz 25Hz 30Hz 50Hz 60 Hz Multimedia Note Multimedia file names must not exceed 128 characters Supported audio video formats Video Decoder Supported m
48. s OK 3 Follow the onscreen instructions to update the channels Copy channels ATTENTION This feature is intended for dealers and service personnel You can copy channel lists from one Philips TV to another through a USB storage device You do not need to search for channels or install them again on the second TV The channel list file is small enough to fit on any USB storage device What you need Two Philips TVs that have these properties e The same country setting e The same year range e The same DVB type as indicated by the suffix H K T D 00 in the model name e The same hardware type as indicated by the sticker on the back of the TV For example TPM10 1E LA e Compatible software versions Note If you are prompted to enter a code enter 8888 Step 1 Check the country setting 1 Switch on the first TV with the channels that you want to copy to the second TV 2 Press ff 3 Select Setup gt Search for channels gt Reinstall channels then press OK The country menu is displayed 4 Make a note of the current setting 5 Press D 6 Press Cancel to exit Step 2 Copy channel list to USB 1 Connect a USB storage device to the first TV with the channels installed on it 2 Press ff 3 Select Setup gt Channel settings 4 Select Channel installation gt Copy channel list gt Copy to USB then press OK The channel list is copied to the
49. s and TP Vision play an active role in he development of international EMF and safety standards enabling the anticipation of further developments in standardisation for early integration in the products Open source software TP Vision Netherlands B V hereby offers to deliver upon request a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences This offer is valid up to three years after product purchase to anyone in receipt of this information To obtain the source code please write in English to Intellectual Property Department TP Vision etherlands B V P O Box 80077 5600 KA Eindhoven The Netherlands Trademarks and copyrights Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries DE DOLBY DIGITALPLUS anufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Hom The terms HDMI and HDMI High Definition ultimedia Interface and the HDMI Logo are rademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries K ensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries hroughout the world
50. sh e Make sure that all cables are properly connected and that the correct network is selected Previously installed channels do not appear in the channel list Make sure that the correct channel list is selected You want to rearrange or reorder the channel list After channels have been installed they appear in the channel list For information about managing channel lists including rearranging channels see Watch TV gt Manage channel lists Page 11 Picture issues The TV is on but there is no picture or the picture is distorted e Make sure that the antenna is properly connected to the TV e Make sure that the correct device is selected as the display source e Make sure that the external device or source is properly connected There is sound but no picture Make sure that the picture settings are set correctly There is poor TV reception from an antenna connection ake sure that the antenna is properly connected to the TV e Loud speakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices ake sure that the devices are connected properly ake sure that the picture setti
51. t it e Make sure that the power cable is securely connected When you are turning the TV on off or to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up This does not affect performance The TV does not respond to remote control or TV controls when switched on The TV requires some time to start up During this time the TV does not respond to the remote control or TV controls This is normal behaviour If the TV continues to be unresponsive to the remote control view the remote control sensor through a digital camera if you press any button on the remote control and notice red flickering at the sensor the remote control is working but the TV may need to be checked by Philips TV Consumer Care This troubleshooting procedure is not applicable to remote controls that are paired wirelessly with the TV When the TV is in standby a start up splash screen is displayed then the TV returns to standby mode This is normal behaviour When the TV is disconnected and reconnected to the power supply the startup screen is displayed at the next startup To switch on the TV from standby press on the remote control or the TV The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before you reconnect the power cable If the bl
52. t that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount TP Vision bears no responsibility for improper wall mounting that results in accident injury or damage f you need to store the TV disassemble the stand from the TV ever lay the TV on its back with the stand installed Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on he back of the TV Never connect the TV to the power outlet if the voltage is different Parts of this product may be made of glass Handle with care to avoid injury and damage Follow these precautions to prevent the TV from toppling over and causing injury to children Never place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over the edge of the surface EN 3 English e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries e The product or remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Risk of overheating e Never install the TV in a confined space Always leave a space of at le
53. tch TV press 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual installation gt Search channel then press OK 4 Find the channel e If you know the channel frequency enter it with the Navigation buttons or Numeric buttons e If you do not know the channel frequency search for the next frequency that has a strong signal Select Search then press OK 5 After you have found the correct channel select Done then press OK 6 Select Store as new channel then press OK to store the new TV channel Note If the reception is poor reposition your antenna and repeat the procedure 3 Select Digital Reception test gt Search channel then press OK 4 Press the Numeric buttons to enter the channel frequency 5 Select Search then press OK 6 When the channel is found select Store then press OK Fine tune analogue channels If the reception of an analogue TV channel is poor you can fine tune the TV channel 1 Press 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual installation gt Fine tune then press OK 4 Press amp or W to fine tune the channel 5 When you have selected the correct channel frequency select Done then press OK 6 Select an option then press OK e Store current channel Store the channel under the current channel number e Store
54. ultimedia connections e USB 2 0 FAT FAT 32 NTFS only connect USB devices that consume 500 mA of power or less Supported image files e JPEG jpg jpeg e PNG png Supported audio files e MPEG1 mp3 e Bit rate 32 kbps 64 kbps 96 kbps 128 kbps 196 kbps 256 kbps 320 kbps e Sampling frequency 32 kHz 44 1 kHz 48 kHz Supported video files e MPEG1 2 avi mpg mpeg ts e MPEG4 avi mp4 mov mkv e H 264 avi mp4 mov mky ts Supported subtitle format e SRI multiple language support Resolution Audio Decoder x264 H264JAVC encoder X264 1920x1080 30 fps MPEG Layer 3 192 kBit s 48 000 Hz Stereo 1920 x 1080 MP3 MP2 AC3 XviD 1920x MP3 MP2 MPEG1 768 x MP3 MP2 AC3 MPEG2 1920 x MP3 MP2 AC3 H 264 1920 x MP3 MP2 AC3 MPEG 4 1920 x 1080 MP3 MP2 AC3 H 264 1920 x 1080 MPEG 4 1920 x 1080 MKV H 264 1920 x 1080 MP3 AC3 MPEG 1920 x 1080 MP3 MP2 AC3 MPEG1 768 x S76 MP2 AC3 PS Program Stream formats MPEG2 1920 x 1080 MP2 AC3 EN 41 English Connectivity 32 39PFL3xx8H T and 39PFL4398H T Rear connectors e HDMI 2 e SERV U Service port e TV ANTENNA 75 ohm coaxial IEC SCART RGB CVBS SCART adaptor 32 39PFL3xx8H T and 39PFL4398H T Right side connectors e HDMI 1 ARC HDMI Audio Returm Cha
55. uted or set to zero ake sure that the TV speaker setting is selected Press OPTIONS select Picture and sound gt Speakers then select TV ake sure that the TV audio output is connected to the audio input on the HDMI CEC enabled or EasyLink compliant home theatre device Sound should be heard from the home theatre speakers e Some devices may require you to manually enable HDMI audio output If HDMI audio is already enabled but you still do not hear audio try changing the digital audio format of the device to PCM Pulse Code Modulation Refer to the documentation accompanying your device for instructions There is a picture but the sound quality is poor Make sure that the sound settings are correctly set Connection issues There are problems with HDMI devices e Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from an HDMI device e If the TV does not recognise the HDMI device and no picture is displayed switch the source from one device to another and back again e If there are intermittent sound disruptions make sure that output settings from the HDMI device are correct e Ifyou use an HDMI to DVI adapter or HDMI to DVI cable make sure that an additional audio cable is connected to AUDIO IN mini jack only if available You cannot use EasyLink features Make sure that your HDMI devices are H
56. ve 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health EN 7 English Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health Use the Philips connectivity guide An easy to use connectivity guide gives you guidance on how to connect your TV to other devices Visit http www connectivityguide philips com Search the TV forum Your question may have already been answered by the Philips TV community of users Visit www supportforum philips com Energy label The European Energy Label informs you on the energy efficiency class of the product The greener the energy efficiency class of this product is the lower the energy it consumes On the label you can find the energy efficiency class the average power consumption of the product in use and the average energy consumption for 1 year You can also find the power consumption values for the pro
57. vices Before you can watch a device connect the device to the TV Select a device with SOURCE 1 Press SOURCE 2 Select a device then press OK Select a device from the Home menu 1 Press t 2 Select Source then press OK 3 Select the device then press OK EN 12 Use picture and sound presets Your TV comes with predefined picture and sound settings You can apply these settings or customise them Select your preferred picture settings 1 While you watch TV press OPTIONS 2 Select Picture and sound gt Picture style then press OK 3 Select an option then press OK e Personal Apply your personalised picture settings e Vivid Rich and dynamic settings ideal for daytime viewing e Natural Natural picture settings e Standard Default settings that suit most environments and types of video e Movie Ideal settings for movies e Photo Ideal settings for photos e Energy saving Settings that conserve the most energy Select your preferred sound settings 1 While you watch TV press OPTIONS 2 Select Picture and sound gt Sound style then press OK 3 Select an option then press OK e Personal Apply your personalised sound settings e Original Settings that suit most environments and types of audio e Movie Ideal settings for movies e Music Ideal settings for listening to music e Game Ideal settings for games e N
58. which this booklet was packaged Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V Specifications are subject to change without notice TP Vision reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The written material packaged with the TV and the manual stored in the memory of the TV or downloaded from the Philips website are believed to be adequate for the intended use of the system If the product is used for purposes other than those specified herein TP Vision cannot guarantee the proper functioning and the safety of the product English TP Vision cannot be held responsible for any errors in the content of this document nor for any problems as a result of the content of this document Errors reported to TP Vision will be amended and published on the Philips support website as soon as possible Terms of warranty e The terms of warranty can be downloaded from the Philips support website Never attempt to repair the TV yourself due to risk of injury damage to the TV or voiding of warranty e Use the TV and accessories only as intended by the manufacturer e The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips TV Consumer Care for service or repairs e Any operation expressly prohibited in
59. y Contact Philips TV Consumer Care to have the TV checked before use e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times ever insert objects into the ventilation slots or other openings on the TV ever expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Ensure that the power plug is fully inserted into the power socket Loose power plugs can cause arcing or fire e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing To disconnect the TV from the mains power the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times Risk of damage to the TV Risk of injury to children Two people are required to lift and carry a TV that weighs more than 25kg or 55lbs When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand When wall mounting the TV use only a wall moun
Download Pdf Manuals
Related Search