Maxell MPC-R1700
Contents
1. Depending on device used this product may not have sufficient output and not be able to charge the devices For the type of data transfer device with computer it may be unchangeable When the device is at zero battery level or depending on the device in use boosting time might be longer or the device might not be able to be charged Please check before charging Maxell warranty does not cover any accidental loss of your data Maintenance Use cloth with neutral cleansing agent or water to remove the dirt from the product body and use a soft dry cloth to clean it Do not use near gasoline thinner or alcohol etc Trouble Shooting Please contact the Customer Service department if below troubles cannot be solved Trouble Shooting Reasons Countermeasures Charging LED light does not come on when this product is charging Or it takes longer than the specified charging time PC is in standby mode Change PC from stand by mode USB port does not have sufficient power Disconnect other device from the output port This product is charging when connected to the device Disconnect the device Charge the device separately Circumstance temperature is over the operation temperature range Product is kept in no use for long period and battery is fully discharged The product is unable to be used Please charge the product every 3 months Battery is hot Product will be warm in u2. MPC R1700 User manual Maxell Rechargeable Power Bank MPC R1700 Accessories Charger unit x 1 Charging cable 20cm x 1 Instruction booklet with warranty sheet x 1 Should there be product improvements the product appearance or specifications may change without prior notice This instruction manual is not allowed to be copied partially or wholly Unauthorized reproduction is also prohibited Disclaimers Maxell is not liable for the injuries due to fire accidents earthquake third party activities Maxell is not liable for other defects due to improper misuse of the product caused by the user Maxell is not liable for any injury caused when using this product or during the connection between device to device This product is designed only for Normal Consumer Use and should NOT be used for Industrial Purposes If the product is used in this way Maxell is NOT liable for human injury or fire accident Caution Please follow the caution below when using our product Danger Do not connect input and output conversely Do not take power from sources other than from the USB port Do not disassemble or modify the product Do not immerse in water Do not make short circuit to the ports Do not leave the product in places of high temperature or under direct sunlight Do not throw into fire Do not touch the product if you see any liquid leaking around Warning Do not operate the product if it generates excessive heat
3. or have abnormal smell or change in color If any liquid from the product comes into contact with the skin or clothes please rinse with clean water immediately When the specified charge time is over and charging is still in operation please stop the charging immediately Do not drop the product Please allow product ventilation Do not use the product near inflammable gases or liquids such as gasoline Do not touch the product with wet hands Do not puncture the casing of the product Please supervise all children if allowing them to use the product Keep away from babies at all times Attention Please be careful when placing the product down do not drop it from a high distance or magnetic field place Please charge at the scope of 0 to 60 degree Do not charge the product and another charged product simultaneously Please charge the product every 3 months Parts names Body Input terminal USB Micro B Output terminal USB Standard A The battery Level indicator LED Touch sensor LED light on after pressed LED indicator Recharging Discharge without connectio Orange 0 80 0 10 Blue 80 100 10 100 Charging cable specify for Charging For use only with product USB Micro B plug USB Standard A plug Operation Procedures 1 Charging Please use this product after a full charge Connect the input port of enclosed recharge cable to the output port of AC adaptor with USB output or PC USB
4. port Charging LED will turn orange LED will turn blue when charging reaches 80 100 Please end charging by disconnecting the cable Charging time around 5 hours Attention Please check the port direction before connection Incorrect connection may damage the product Please end charging if your device cannot be fully charged after certain period of time Do not charge this product when it is connected to another device This may lead to heat generation or damage to the product Charge the product every 3 months even if it is not often in use Otherwise the product might be fully discharged and might not be able to charge again Battery level checking Press the touch sensor when product does not connect to Input output ports LED will turn blue or orange according on battery remaining level Battery remaining level is below 10 when LED turns orange There is no battery if the LED does not come on Please recharge the product Charge the smartphone 2 It is necessary to use the attached USB charging cable Connect the output port of attached charging cable to smartphone LED will turn blue the smartphone has started charging Charging cable included as accessories Smartphone Please check the Smartphone or connected device charging display under the charging situation Please disconnect the cable when the charging is completed or when you want to stop charging Attention Rating output for this product is DC5V 1A
5. se in charging and just after charging Please use it after a while Remaining battery level LED does not light up There is no remaining battery Please charge the product Device cannot be charged Cables and ports connection are in Please double check the shape of input port of the correct devices Port connection is not Please double check the perfect connection Battery with short operation time Remaining battery level is low Please charge the product Battery s life span comes to end Battery s life span comes to end if operation time is extremely short even it is fully charged Specification Product size 94x42 5x9 8mm without protruded parts Input voltage current DC5V max 0 5A Output voltage current DC5V max 1A Unit weight 55g Operation temperature 0 40 C Charging time 5 hours Above charging time is the standard for charging battery remaining level from zero to fully charged Charging time vary depends on battery remaining level or circumstance temperature Accessory USB micro USB 20cm
Download Pdf Manuals
Related Search