Home

VIVOTEK SD8111 surveillance camera

Contents

1. NOTE P For Mozilla Firefox or Netscape users your browser will use Quick Time to stream the live video If you don t have Quick Time on your computer please download it first then launch the web browser gt By default the Network Camera is not password protected To prevent unauthorized access it is highly recommended to set a password for the Network Camera For more information about how to enable password protection please refer to Security on page 28 gt If you see a dialog box indicating that your security settings prohibit running Activex Controls please enable the ActiveX Controls for your browser 1 Choose Tools gt Internet Options gt Security gt Custom Level Internet Options General Security Privacy Content Connections Programs Advanced Select a Web content zone to specify its security settings pens amp o o Local intranet Trusted sites Restricted sites Internet This zone contains all Web sites you haven t placed in other zones Security level for this zone Custom Custom settings To change the settings click Custom Level To use the recommended settings click Default Level Custom Level Default Level 2 Look for Download signed ActiveX controls select Enable or Prompt Click OK Security Settings Settings E Activex controls and plug
2. indicates high priority source lt integer gt 6 6 Indicate the source of media stream O means the first stream 1 means the second stream and etc 2 means the third stream and etc 3 means the fourth stream and etc limitsize 0 1 6 6 Entire free space mechanism Limit recording size mechanism cyclic 0 1 6 6 Disable cyclic recording Enable cyclic recording notify 0 1 6 6 Disable recording notification Enable recording notification notifyserver 0 31 6 6 Indicate which notification server is scheduled One bit represents one application server server_i0 i4 bitO LSB server i0 biti server il bit2 server i2 bit3 server i3 bit4 server i4 For example enable server i0 server i2 and server i4 as notification servers the notifyserver value is 21 weekday O 127 6 6 Indicate which weekday is scheduled One bit represents one weekday bitO LSB Saturday bitl Friday bit2 Thursday bit3 Wednesday bit4 Tuesday bits Monday bit6 Sunday For example to detect events on Friday and Sunday set weekday as 66 begintime hh mm 6 6 Start time of the weekly schedule endtime hh mm 6 6 End time of the weekly schedule 00 00 24 00 indicates schedule always on prefix string 16 6 6 Indicate the prefix of the filename 6 6 The maximum size for cycle recording in Kbytes when choosing to limit recording size reserveamount 6 6 The reserved amount in Mbytes when c
3. 0 Restart the server after lt value gt seconds if lt positive integer gt lt value gt is non negative restoreexceptnet lt Any value gt 7 6 Restore the system parameters to default values except ipaddress subnet router dnsi dns2 pppoe This command can cooperate with other restoreexceptXYZ commands When cooperating with others the system parameters will be restored to the default value except for a union of the combined results restoreexceptdst lt Any value gt Restore the system parameters to default values except all daylight saving time settings This command can cooperate with other restoreexceptXYZ commands When cooperating with others the system parameters will be restored to default values except for a union of combined results restoreexceptlang lt Any Value gt Restore the system parameters to default values except the custom language file the user has uploaded This command can cooperate with other restoreexceptXYZ commands When cooperating with others the system parameters will be restored to the default value except for a union of the combined results Subgroup of system info The fields in this group are unchangeable NAME VALUE SECURITY DESCRIPTION get set string 40 Internal model name of the server eg IP7139 extendedmodelnam string 40 0 7 ODM specific model name of server eg e DCS 5610 If it is not an ODM model this field will be
4. 1 KB File and Folder Tasks mij Rename this File ay Move this File A Copy this File g Publish this file to the Web 2 E mail this File P test txt Notepad Sle File Edit Format View Help NOTIFICATION The Result of Server Test of Your IP Camera Frint this File kad Delete this file Other Places 3 Enter a server name 4 Click Save to complete the settings and click Close to exit the page Recording Settings Click Add to open the recording setting page On this page you can define the adaptive recording recording source recording schedule and recording capacity A total of 2 recording settings can be eOnmgnree Recording name Video Enable this recording With adaptive recording Pre event recording 5 seconds 0 9 Posteventrecording 5 seconds 0 10 Recording name Enter a name for the recording setting Enable this recording Select this option to enable video recording With adaptive recording Select this option will activate the frame rate control according to alarm trigger The frame control means that when there is alarm trigger the frame rate will raise up to the value you ve set on Audio and Video page Please refer to page 55 for more information If you enable adaptive recording and enable time shift cache stream on Camera A only when an event is triggered on Camera A will the server record the full frame rate streaming data otherwise it will only request the frame data during normal
5. 4 operator anonymous viewer Operator access rights can modify most of the camera s dido camctrl operator parameters except some privileges and network options 6 admin anonymous viewer Administrator access rights can fully control the camera s dido camctrl operator operations admin 7 N A Internal parameters Unable to be changed by any external interfaces Get Server Parameter Values Note The access right depends on the URL directory Method GET POST Syntax http lt servername gt cgi bin anonymous getparam cgi lt parameter gt amp lt parameter gt http lt servername gt cgi bin viewer getparam cgi lt parameter gt VIVOTEK amp lt parameter gt http lt servername gt cgi bin operator getparam cgi lt parameter gt amp lt parameter gt http lt servername gt cgi bin admin getparam cgi lt parameter gt amp lt parameter gt Where the lt parameter gt should be lt group gt _ lt name gt or lt group gt lt name gt If you do not specify any parameters all the parameters on the server will be returned If you specify only lt group gt the parameters of the related group will be returned When querying parameter values the current parameter values are returned A successful control request returns parameter pairs as follows Return HTTP 1 0 200 OK r n Content Type text html r n Context Length lt length gt r n
6. IPv address Secondary HTTP port gt If you choose PPPoE as the Network Type the PPPO address will be displayed in the IPv6 information column as shown below eth address feg OTO OOOO OOOO OO ffies Link pppd address ii feR0 OOO0 COO00000 0202 d1 112299 O Link 9001 6100 01 20 0002 0208 d1 el 122994 Glohal Gateway DNS Manually setup the IP address Select this option to manually set up IPv6 settings if your network environment does not have DHCPV6 server and router advertisements enabled routers If you check this item the following blanks will be displayed for you to enter the corresponding information Enable IPv IPFv6 Information Manually setup the IP address Optional IP address Prefix length i 64 Optional default router Optional primary ONS Enable this function if your network environment uses IEEE 802 1x which is a port based network access control The network devices intermediary switch access point hub and RADIUS server must support and enable 802 1x settings The 802 1x standard is designed to enhance the security of local area networks which provides authentication to network devices clients attached to a network port wired or wireless If all certificates between client and server are verified a point to point connection will be enabled if authentication fails access on that port will be prohibited 802 1x utilizes an existing protocol the Extensible Authentication Pro
7. Select Enable privacy mask to enable this function 2 Click on the video window or use camera control buttons Up Down Left Right Home and Go to to move the desired position to the center 3 Use the mouse to size and drag drop the window which is recommended to be at least twice the size of the object height and width you want to cover 4 Enter a Window Name and click Add The name of privacy mask will be displayed on the Privacy Mask list 5 If you want to set up more privacy masks please repeat above steps Up to 8 privacy mask windows can be set up and only 4 windows can be displayed on the same screen 6 Choose one color to apply to all privacy mask windows NOTE gt If the frame is not at 1x zoom a warning message will pop up as shown below Click Yes and to go back to 1x zoom Please go back to zoom Lx to set the privacy mask gt Up to 5 privacy mask windows can be set up on the same screen gt If you want to delete the privacy mask window please click the x on the upper right hand corner of the window Sensor Settings Advanced Mode Click Sensor Settings to open the Sensor Settings page On this page you can set the exposure time back light compensation and day night settings You can configure two sets of sensor settings one for normal situations the other for special situations such as day night schedule mode 2010 05 05 13 44 17 Exposure Sensor Setting 1 Auto For normal s
8. assigned The lt return page gt can be a full URL path or relative path according to the current path If you omit this parameter it will redirect to an empty page Note The return page can be a general HTML file htm Atml or a VIVOTEK server script executable vspx file It cannot be a CGI command or have any extra parameters This parameter must be placed at the end of the parameter list Return HTTP 1 0 200 OK r n Content Type text html r n Context Length lt length gt r n r n lt parameter pair gt where lt parameter pair gt is lt parameter gt lt value gt r n lt parameter pair gt Only the parameters that you set and are readable will be returned Example Set the IP address of server to 192 168 0 123 Request http myserver cai bin admin setparam cai network ipaddress 192 168 0 123 Response HTTP 1 0 200 OK r n Content Type text html r n Context Length 33 r n r n network ipaddress 192 168 0 123 r n Available parameters on the server Valid values VALID VALUES DESCRIPTION string lt n gt Text strings shorter than n characters The characters lt gt amp are invalid string n m Text strings longer than n characters and shorter than m characters The characters lt gt amp are invalid Any number between 0 and 2 1 Any number between m and n domain name lt n gt A string limited to a domain name shorte
9. or monthly basis Time zone Advanced Mode select the appropriate time zone from the list If you want to upload Daylight Savings Time rules on the Maintenance page please refer to Upload Export Daylight Saving Time Configuration File on page 97 for details DI and DO DI and DO Digital input The active state is 1 Low the current state detected is High 2 Low the current state detected is High 3 Low v the current state detected is High 40 Low the current state detected is High Digital output The active state is Grounded the current state detected is Open Digital input Select High or Low to define normal status for the digital input The Network Camera will report the current status Digital output Select Grounded or Open to define normal status for the digital output The Network Camera will show whether the trigger is activated or not Security This section explains how to enable password protection and create multiple accounts Root Password Root Password Note Leaving the root password field empty means the camera will not be protected by password Root Password PTTTITIITiiiiicy Confirm root password ITITITITITITI The administrator account name is root which is permanent and can not be deleted If you want to add more accounts in the Manage User column please apply the password for the root account first 1 Type the password identically in b
10. 13 for details 2 Enter the Static IP Subnet mask Default router and Primary DNS provided by your ISP Subnet mask This is used to determine if the destination is in the same subnet The default value is 255 255 255 0 Default router This is the gateway used to forward frames to destinations in a different subnet Invalid router setting will fail the transmission to destinations in different subnet Primary DNS The primary domain name server that translates hostnames into IP addresses Secondary DNS Secondary domain name server that backups the Primary DNS Primary WINS server The primary WINS server that maintains the database of computer name and IP address Secondary WINS server The secondary WINS server that maintains the database of computer name and IP address Enable UPnP presentation Select this option to enable UPnP presentation for your Network Camera so that whenever a Network Camera is presented to the LAN shortcuts of connected Network Cameras will be listed in My Network Places You can click the shortcut to link to the web browser Currently UPnP is supported by Windows XP or later Note that to utilize this feature please make sure the UPnP component is installed on your computer T dy Network Places Fis Edb View Favertes Took Heb r a feast Ii r eo Piers EE JF Wd Py Nabwa Places kd gt ei reu Local abari Aeitmerl Tacks waft Sel a nieri plane fy Wireless Netentek git 1
11. 220 syntax http lt servername gt cgi bin viewer video jpg Description of returned data is written with Return in bold face followed by the returned data in a box All data is returned in HTTP format i e each line is separated with a Carriage Return and Line Feed CRLF printed as r n Return HTTP 1 0 lt HTTP code gt lt HTTP text gt r n URL syntax examples are written with Example in bold face followed by a short description and a light grey box with the example Example request a single snapshot image http mywebserver cgi bin viewer video jpg General CGI URL Syntax and Parameters CGI parameters are written in lower case and as one word without any underscores or other separators When the CGI request includes internal camera parameters these parameters must be written exactly as they are named in the camera or video server The CGIs are organized in functionally related directories under the cgi bin directory The file extension cgi is required Syntax http lt servername gt cgi bin lt subdir gt lt subdir gt lt cgi gt lt ext gt lt parameter gt lt value gt amp lt parameter gt lt value gt Example Set digital output 1 to active http mywebserver cgi bin dido setdo cgi dol 1 Security Level SECURITY LEVEL SUB DIRECTORY DESCRIPTION 1 view anonymous viewer 1 Can view listen talk to camera dido camctrl 2 Can control DI DO PTZ of the camera
12. Administrator privileges Method GET POST Syntax http lt servername gt cgi bin admin editaccount cgi method lt value gt amp username lt name gt amp userpass lt va lue gt amp privilege lt va ue gt amp privilege lt value gt amp return lt return page gt PARAMETER VALUE DESCRIPTION Add an account to the server When using this method the NN username field is necessary It will use the default value of other fields if not specified Delete Remove an account from the server When using this method the username field is necessary and others are ignored edit Modify the account password and privilege When using this method the username field is necessary and other fields are optional If not specified it will keep the original settings username lt name gt The name for the user to add delete or edit userpass lt value gt The password of the new user to add or that of the old user to modify The default value is an empty string lt value gt The privilege of the user to add or to modify operator Operator privilege admin Administrator privilege return lt return page gt Redirect to the page lt return page gt after the parameter is assigned The lt return page gt can be a full URL path or relative path according to the current path If you omit this parameter it will redirect to an empty page System Logs Note This request requires Administ
13. Available codec list available codec types separated by commas audio aec lt boolean gt cancellation l audio_extmic lt boolean gt 0 7 Indicate whether to support external microphone input o 0 7 Indicate whether to support acoustic echo EEE Indicate whether to support line output audio_headphone lt boolean gt out audioin_codec lt a list of the available codec types separated by commas Indicate whether to support headphone output Available codec list lt a list of the Available codec list audioout_codec available codec types separated by commas camctrl_privilege lt boolean gt Indicate whether to support HTTP tunnel for UART transfer Indicate whether to support Manage Privilege of PTZ control in the Security page transmission mod Tx 0 7 Indicate transmission mode of the machine TK e Rx server Rx receiver box Both DVR Both wireless s802dot1 Indicate whether to support wireless 802 11b 1b wireless _s802dot1 lt boolean gt 0 7 19 wireless begincha 1 14 0 7 nnel wireless endchan 1 14 0 7 nel wireless_encrypt_ lt boolean gt 0 7 wep wireless_encrypt_ lt boolean gt 0 7 wpa wireless_encrypt_ lt boolean gt 0 7 wpa2 o l E d nanystream lt positive integer gt _ Group event_customtaskfile_i lt O 2 gt PARAMETER VALUE 7 0 0 7 SECURITY 6 6 Indicate whether to support wir
14. MANULA AT SAMI WA MUA UNE 50 PCOS SUNG ee eencse as ccs E este ese neo ee ete E odie oo eaaerce O 52 Audio and IOSA so aha aa aaa hwa eee eee 55 MOOM DCO IOT aose EEE ai AE EE A E E E A eee EA 64 Aaa AAA Aa KAA E E E A tasandeeasnecanabeceacciee 67 HOME PA rete aeee EAR AE aa 70 APPICCIU ON ii ee E ae en AA AA eee re 73 PRO CON GING eene E E E EE E nlantiampe pun teedenentaican nitssannaaaseulencisan 86 Local SO O eee eee meaner en emt ee anne en Dnt te nee ee NE eer te ten EA eee ne E S 90 eM AA aenees Sak peut neci dae ean seta ceuiones A 94 View mere 2 01 gt oan ed eS Sn eee Kun nawa 95 MTINI TVA AA aaa 96 UA T tsa es pep ese eects a ss 100 URL Commands for the Network Camera cccccccccecccceececeeceeeeceeseeseeeeeseeeseeeeseeeeseueessueessueessaeeeaaess 100 TECHNICA SP SCICAWUONS ia IA aa 149 Technology License Notice cccccccsscccsseccsesecsseeesececeeecscessaeecsueesseeseeeececesseeeneuseeteeseneasensasenees 150 Electromagnetic Compatibility EMC cccccscccccsececceeeeeceeeeeccecesseaeeeseaeeessaseeesaeeeseueeessaseessageeneas 151 Overview Read Before Use The use of surveillance devices may be prohibited by law in your country The Network Camera is not only a high performance web ready camera but can also be part of a flexible surveillance system It is the user s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use It i
15. NET Information fethO address IPv6 address list of host Gateway IPv6 address list of gateway DNS IPv6 address list of DNS If your IPv6 settings are successful the IPv6 address list will be listed in the pop up window The IPv6 address will be displayed as follows Refers to Ethernet address 200 e008 2500 0002 0200 41 fel 65 ft id Global Link global IPv6 address network mask fe SO OOO0 O000 0000 C21 ff teld bate Abd Link Link local IPv6 address network mask Gateway teal 1 ditt teat lath CNE Eigr Please follow the steps below to link to an IPv6 address 1 Open your web browser 2 Enter the link global or link local IPv6 address in the address bar of your web browser 3 The format should be http 2001 0c08 2500 0002 0202 d1ff fe04 65f4 IPv6 address 4 Press Enter on the keyboard or click Refresh button to refresh the webpage For example Network Camera Microsoft Internet Explorer File Edit View Favorites Tools Help sack eg x 2 A JO Search SP Favorites g rah E 33 Address http 2001 0c08 2500 0002 0202 d1ff fe04 65f4 VIVOTEK Wil i rae ore NOTE gt Ifyou have a Secondary HTTP port the default value is 8080 you can also link to the webpage in the following address format Please refer to HTTP on page 45 for detailed information http 2001 0c08 2500 0002 0202 d1ff fe04 65f4 8080 T
16. Network Cameras Please install the recording software then launch the program to add the Network Camera to the Channel list For detailed information about how to use the recording software please refer to the user s manual of the software or download it from http www vivotek com W LiveCheni _ ee p ju _ eS ara eas a et E er ee bo ME a rae rs ie tj Ei a ee Wa FTI Tome ve dai putar Aai Bema ind Ser ae dl Main Page This chapter explains the layout of the main page It is composed of the following sections VIVOTEK INC Logo Host Name Camera Control Area Configuration Area and Live Video Window Resize Buttons VIVOTEK INC Logo Camera Control Area Hide Button Live View Window Configuration Area VIVOTEK INC Logo Click this logo to visit the VIVOTEK website Host Name The host name can be customized to fit your needs For more information please refer to System on page 26 Camera Control Area Video Stream This Network Camera supports multiple streams stream 1 3 simultaneously You can select either one for live viewing For more information about multiple streams please refer to page 61 for detailed information Digital Output Click to turn the digital output device on or off PTZ Panel This Network Camera supports pan tilt zoom control Please refer to Camera Control on page 67 for detailed information Configuration Area Client Settings Click
17. Wrong PKG file format Unpack fail User s Manual 99 Appendix URL Commands for the Network Camera Overview For some customers who already have their own web site or web control application the Network Camera Video Server can be easily integrated through URL syntax This section specifies the external HTTP based application programming interface The HI TP based camera interface provides the functionality to request a single image control camera functions PTZ output relay etc and get and set internal parameter values The image and CGl requests are handled by the built in Web server Style Convention In URL syntax and in descriptions of CGI parameters text within angle brackets denotes content that is to be replaced with either a value or a string When replacing the text string the angle brackets should also be replaced An example of this is the description of the name for the server denoted with lt servername gt in the URL syntax description below that is replaced with the string myserver in the URL syntax example further down in the page URL syntax is denoted with the word Syntax written in bold face followed by a box with the referenced syntax as shown below For example name of the server is written as lt servername gt and is intended to be replaced with the name of the actual server This can either be a name e g Mywebcam or thecam adomain net or the associated IP number for the server e g 192 168 0
18. a date time suffix to the file name For example p gt Snapshot_20100607_100341 t File name prefix Date and time suffix The format is YYYYMMDD_HHMMSS Click Save to enable the settings then click Close to exit the page Video clip Select to send video clips when a trigger is activated Media name Video Clip Media Type Snapshot Video Clip SOUrCE Pre eventrecording 0 seconds 0 9 Maximum duration 5 seconds 11 10 Maximum file size 500 Kbytes 0 800 File name prefix Video Clip_ System log Save m Source The source of video clip which will be identical to the time shift caching stream For more information about time shift caching stream please refer to page 55 m Pre event recording The Network Camera has a buffer area it temporarily holds data up to a certain limit Enter a number to decide the duration of recording before a trigger is activated Up to 9 seconds can be set m Maximum duration Specify the maximum recording duration in seconds Up to 10 seconds can be set For example if pre event recording is set to five seconds and the maximum duration is set to ten seconds the Network Camera continues to record for another 4 seconds after a trigger is activated a N d Trigger Activation m Maximum file size Specify the maximum file size allowed m File name prefix Enter the text
19. a time period please apply TO operation Ex triggerTime 2008 01 01 00 00 00 TO 2008 01 01 23 59 59 is to search for records from the start of Jan 1 2008 to the end of Jan 1 2008 limit lt positive integer gt Optional Limit the maximum number of returned search records offset lt positive integer gt Optional Specifies how many rows to skip at the beginning of the matched records Note that the offset keyword is used after limit keyword To increase the flexibility of search command you may use OR connectors for logical OR search operations Moreover to search for a specific time period you can use TO connector Ex To search records triggered by motion or di or sequential and also triggered between 2008 01 01 00 00 00 and 2008 01 01 23 59 59 http lt servername gt cgi bin admin Isctrl cgi cmd search amp triggerlType motion OR di OR seq amp trig gerTime 2008 01 01 00 00 00 TO 2008 01 01 23 59 59 Command delete lt integer primary key gt Required Identify the designated record Ex label 1 Ex Delete records whose key numbers are 1 4 and 8 http lt servername gt cgi bin admin Isctrl cgi cmd delete amp label 1 amp label 4 amp label 8 Command update PARAMETER VALUE DESCRIPTION lt integer primary key gt Required Identify the designated record Ex label 1 isLocked lt boolean gt Required Indicate if the
20. by VIVOTEK If you check this item it will be removed from the homepage Logo Here you can change the logo at the top of your homepage Logo graph You can upload a small logotGif JPG or PNG which will be resized to 160 50 pixels if it is not already that size and which will be visible on the main page Upload a new logo will replace the old custom logo if there was one Uploaded Default Custom Yviverk Y a VIVOTEK VIVOTEK Logo link http vivotek com Gene Follow the steps below to upload a new logo 1 Click Custom and the Browse field will appear 2 Select a logo from your files 3 Click Upload to replace the existing logo with a new one 4 Enter a website link if necessary 5 Click Save to enable the settings Theme Options Here you can change the color of your homepage layout There are three types of preset patterns for you to choose from The new layout will simultaneously appear in the Preview filed Click Save to enable the settings Theme Options Themes Color Font color Preset Patterns area Font color of video title Font color of configuration ERT Bk color of control area edeatt Ek color of configuration area Bk color of video area c4eat O Custom Frame color Preview VIVOTEK 12x Zoom Speed Dome EONS WW I a om Title Video Stream 1 Font Color Digital Output Background Color of the Control Area i Client Settings Background Color o
21. dependent gt Preview of brightness adjustment of image according to mode settings Preview of contrast adjustment of image according to mode settings lt product dependent gt Preview of sharpness adjustment of image Saturation 5 5 4 4 Preview of saturation adjustment of image according to mode settings according to mode settings Group timeshift c for n channel products m is stream number NAME VALUE SECURITY DESCRIPTION get set 4 4 c lt O n 1 gt _s lt 0 lt boolean gt 4 4 Enable time shift streaming for specific stream m 1 gt _allow product dependent Group motion_c lt O n 1 gt for m profile and n channel product NAME VALUE SECURITY DESCRIPTION get set win_i lt O0 2 gt name string 14 4 4 Name of motion window 1723 4 4 win_i lt O 2 gt _sensitivity O 100 Sensitivity of motion detection window Group motion_c lt O n 1 gt profile for m profile and n channel product capability nmotionprofile gt 0 NAME VALUE SECURITY DESCRIPTION get set i lt O m 1 gt _enable Enable profile 1 m 1 4 4 i lt O m 1 gt _policy day The mode which the profile is applied night to schedule i lt O m 1 gt _endtime hh mm 4 4 i lt O m 1 gt _win_i lt O 2 gt _enable lt boolean gt 4 4 i lt O m 1 gt _win_i lt O 2 gt _name string 14 4 4 lt O m 1 gt _win_i lt 0 2 gt let o 320 4 4 lt O m 1 gt _winI lt 0 2 gt top o 240 4 4 lt O m 1 gt _win i
22. e mail address as notifications In the illustration on the right an event can bef 2 triggered by many sources such as motion detection Event Trigger gt Action or external digital input devices When an event S s votion Detection i ar l Digital Input triggered you can specify what type of action that will system Reboot be performed You can configure the Network Camera Vee gar to send snapshots or videos to your email address or ee eon ol FTP site Sytem lod Dukani Nevo foage Event Settings Name Status Sun Mon Tue Wed Thu Fri Sat Time Trigger Customized Script Name Date Time J Customized Script This function allows you to upload a sample script xml file to the webpage which will save your time on configuring the settings Please note that there is a limited number of customized scripts you can upload if the current amount of customized scripts has reached the limit an alert message will pop up If you need more information please ask for VIVOTEK technical support Customized Script Name Date Time Userl 20061113 16 13 46 User 20061113 18 11 32 Click to upload a file Useri Click to modify the mcrae consieseeenuty script online Pais aaa aia Loh VIVOTEK Event Settings In the Event Settings column click Add to open the Event Settings page On this page you can arrange three elements T
23. earlier video data Video orientation Flip vertically reflect the display of the live video Mirror horizontally reflect the display of the live video Select both options if the Network Camera is installed upside down ex on the ceiling to correct the image orientation Please note that the preset locations will be cleared after flip mirror Overlay title and time stamp on video Select this option to place the video title and time on the video streams Note that when the frame size is set to 176 x 144 as shown in the picture below only the time will be stamped on the video streams VideotTCP Av 2010 05 04 13 44 17 a tn wo a el LE Image Settings Advanced Mode Click Image Settings to open the Image Settings page On this page you can tune the White balance Brightness Saturation Contrast and Sharpness settings for the video Image Settings Privacy Mask sensor settings 2010 05 05 13 44 17 White Balance Auto Color temperature Image Adjustment Brightness saturation 0 v l Contrast 0 Sharpness 0 vi Preview Restore Save White balance Adjust the value for the best color temperature m Auto The Network Camera automatically adjusts the color temperature of the light in response to different light sources The white balance setting defaults to Auto and works well in most situations m Color temperature Set the white balance according the color temperature of the ambi
24. equal to modelname sevsirumber lt maceddress gt 0 7 12 characters MAC address without hyphens firmwareversion string 40 0 7 Firmware version including model company and version number in the format lt MODEL BRAND VERSION gt Number of webpage languages available on the server language_i lt O cou string 16 0 7 Available language lists nt 1 gt Maximum number of custom languages supported on the server customlanguage_m lt integer gt 0 6 axcount customlanguage_co lt integer gt 0 6 Number of custom languages which have been pe if KAA uploaded to the server customlanguage_i lt string Custom language name O maxcount 1 gt Group status SECURITY DESCRIPTION get set di_i lt O ndi 1 gt lt boolean gt 0 gt Inactive normal 1 gt Active triggered do_i lt 0 ndo 1 gt lt boolean gt 0 gt Inactive normal 1 gt Active triggered onlinenum_httppush integer Current number of HTTP push server connections 1 99 Get network information from mii tool Group di_i lt QO ndi 1 gt capability ndi gt 0 NAME VALUE SECURITY DESCRIPTION get set normalstate high 1 1 Indicates open circuit or closed circuit inactive low status Group do_i lt QO ndo 1 gt capability ndo gt 0 NAME VALUE SECURITY DESCRIPTION get set normalstate open Indicate open circuit or closed circuit grounded inactive status Group security NAME SECU
25. external camera O external 1 built in Bit 2 gt Support pan operation O not support 1 support Bit 3 gt Support tilt operation O not support 1 support Bit 4 gt Support zoom operation O not support 1 support Bit 5 gt Support focus operation O not support 1 support imprinttimestamp oa Overlay time stamp on video S lt 0 m 1 gt _codecty Video codec type pe S lt O m 1 gt _resoluti QCIF Video resolution in pixels on 176x120 176x144 CIF 352x240 352x288 4CIF 704x480 704x576 D1 720x480 720x576 s lt 0 m 1 gt _h264_in 250 500 4 4 Intra frame period in milliseconds traperiod 1000 2000 3000 4000 s lt 0 m 1 gt _h264_r cbr vbr 4 4 cbr constant bitrate atecontrolmode s lt 0 m 1 gt _h264_q 99 1 5 4 4 uant s lt 0 m 1 gt _h264_q O 51 7 4 value oe S lt O m 1 gt _h264_bi 1000 400 4 4 trate ratecontrolmode S lt O0 m 1 gt _h264_m 1 30 1 4 Set maximum frame rate in fps for H 264 vbr fix quality Quality of video when choosing vbr in ratecontrolmode 99 is the customized manual input setting 1 worst quality 5 best quality The specific quality parameter of the H264 encoder O best quality 51 worst quality Set bit rate in bps when choosing cbr in S lt O0 m 1 gt _mpeg4_ 250 500 Intra frame period in milliseconds intraperiod 1000 2000 3000 4000 S lt O m 1 gt _mpeg4_ cbr vbr 4 4
26. file is locked or not Ex Update records whose key numbers are 1 and 5 to be locked status http lt servername gt cgi bin admin Isctrl cgi cmd update amp isLocked 1 amp label 1 amp label 5 Ex Update records whose key numbers are 2 and 3 to be unlocked status http lt servername gt cgi bin admin Isctrl cgi cmd update amp isLocked 0 amp label 2 amp label 3 Command queryStatus retType xml or javascript Optional Ex retype javascript The default return message is in XML format Ex Query local storage status and call for javascript format return message http lt servername gt cgi bin admin Isctrl cgi cmd queryStatus amp retType javascript VIVOTEK Technical Specifications Models System SD8111 SD8121 CPU TI DM365 SoC Flash 128MB RAM 128GB Embedded OS Linux 2 4 Pan Tilt Zoom Pan range 360 continuous rotation Tilt range 10 190 flip 12x optical zoom Pan speed 0 1 300 sec Tilt speed 0 1 120 sec Auto pan mode Auto patrol mode Networking Alarm and Event 10 100 Mbps Ethernet RJ 45 ONVIF support Protocols IPv4 IPv6 TCP IP HTTP HTTPS UPnP RTSP RTP RTCP IGMP SMTP FTP DHCP NTP DNS DDNS PPPoE CoS QoS and 802 1X Triple window video motion detection Lens 12x optical zoom lens f 3 8 45 6 mm F1 6 wide F2 8 tele auto iris focus range 20 mm wide 3 000 mm t
27. for detailed information 4 Click Save to enable the setting and click Close to exit the page Video quality settings for stream 1 stream 2 Advanced Mode Click the stream item to display the detailed information Video quality settings for stream 1 Video quality settings for stream 3 O MPEG 4 MPEG 4 H 264 O H 264 Frame size D1 vi JPEG Maximum frame rate 30 fps NI Frame size QCIF Iw Intra frame period as M Maximum frame rate 30 fps video quality video quality Good Constant bit rate 512 Kbps w 9 Fixed quality Good k O JPEG Video quality settings for stream 2 MPEG 4 Frame size D1 v Maximum frame rate 30 fps Intra frame period E Video quality Constant bit rate 512Kbps Fixed quality Good v O H 264 O JPEG This Network Camera offers real time H 264 MPEG 4 and MJEPG compression standards Triple Codec for real time viewing If H 264 MPEG 4 mode is selected the video is streamed via RTSP protocol There are four parameters for you to adjust the video performance m Frame size You can set up different video resolution for different viewing devices For example set a smaller frame size and lower bit rate for remote viewing on mobile phones and a larger video size and a higher bit rate for live viewing on web browsers Note that a larger frame size takes up more bandwidth m Maximum frame rate This limits the maximum refresh frame rate p
28. get set videoport 1025 65535 Video channel port for RTP nn aan capability protocol rtp_unicast 1 audioport 1025 65535 Audio channel port for RTP ann an capability protocol rtp_unicast 1 Subgroup of network pppoe NAME VALUE SECURITY DESCRIPTION get set Sstring 128 m PPPoE account user name password 64 PPPoE account password Group ipfilter NAME VALUE SECURITY DESCRIPTION get set admin_ip String 44 Administrator IP address maxconnection Maximum number of concurrent streaming connection s allow i lt 0m9 gt start 1 0 0 0 Allowed starting IPv4 address for connection 255 255 255 255 allow i lt 0m9 gt end 1 0 0 0 Allowed ending IPv4 address for connection 255 255 255 255 deny i lt 0m9 gt start 1 0 0 0 Denied starting IPv4 address for connection 255 255 255 255 deny i lt 0m9 gt end 1 0 0 0 Denied ending IPv4 address for connection 255 255 255 255 ipv6_allow_i lt O 9 gt String 44 Allowed IPv6 address for connection ipv6_deny_i lt O 9 gt String 44 Denied IPv6 address for connection Group videoin_c lt O n 1 gt for n channel products and m is stream number SECURITY DESCRIPTION get set color 0 1 4 4 0 gt monochrome 1 gt color niet ted ptzstatus lt integer gt 1 7 A 32 bit integer each bit can be set separately as NAME follows Bit 0 gt Support camera control function O not Support 1 Support Bit 1 gt Built in or
29. http lt ip address gt lt http port gt lt access name for stream 1 3 gt will fail to access the Network Camera HTTPS HTTPS HTTPS port 443 By default the HTTPS port is set to 443 It can also be assigned to another port number between 1025 and 65535 Two way audio Two way audio Twa way audio port 5060 By default the two way audio port is set to 5060 Also it can also be assigned to another port number between 1025 and 65535 The Network Camera supports two way audio communication so that operators can transmit and receive audio simultaneously By using the Network Camera s built in or external microphone and an external speaker you can communicate with people around the Network Camera Note that as JPEG only transmits a series of JPEG images to the client to enable the two way audio function make sure the video mode is set to MPEG 4 on the Audio and Video Settings page and the media option is set to Video and Audio on the Client Settings page Please refer to Client Settings on page 23 and Audio and Video Settings on page 55 lt _ Audio transmitted to operators Mute Maana Click P to enable audio transmission to the Network Camera click to adjust the volume of microphone click g to turn off the audio To stop talking click P again FTP FTP FTP port 2 The FTP server allows the user to save recorded video clips You can utilize VIVOTEK s Installation Wizard 2 to upgrade the fi
30. ins hiyi Download signed Activex controls Disable E Enable Prompt Download unsigned Actives controls Disable Enable Prompt Wl Initialize and script Actives controls nok marked as safe Disable Enable Reset custom settings 3 Refresh your web browser then install the Active X control Follow the instructions to complete installation Using RTSP Players To view the MPEG 4 streaming media using RTSP players you can use one of the following players that support RTSP streaming Quick Time Player ae Real Player 1 Launch the RTSP player 2 Choose File gt Open URL A URL dialog box will pop up 3 The address format is rtsp lt ip address gt lt rtsp port gt lt RTSP streaming access name for stream1 or stream2 gt As most ISPs and players only allow RTSP streaming through port number 554 please set the RTSP port to 554 For more information please refer to RTSP Streaming on page 48 For example Open URL Enter an Internet UAL to open 4 The live video will be displayed in your player For more information on how to configure the RTSP access name please refer to RTSP Streaming on page 48 for details Using 3GPP compatible Mobile Devices To view the streaming media through 3GPP compatible mobile devices make sure the Network Camera can be accessed over the Internet For more information on how to set up the Network Camera over the Internet please r
31. of center after movement y lt integer gt y coordinate clicked by user It will be the y coordinate of center after movement videosize lt window size gt rhe size of plug in ActiveX window in web page resolution lt window size gt The resolution of streaming stretch lt boolean gt 0 indicates that it uses resolution streaming size as the range of the coordinate system 1 indicates that it uses videosize plug in size as the range of the coordinate system Far Focus on further distance Near Focus on closer distance O O C W lt return page gt Redirect to the page lt return page gt after the parameter is assigned The lt return page gt can be a full URL path or relative path according to the current path If you omit this parameter it will redirect to an empty page Recall capability ptzenabled Note This request requires Viewer privileges Method GET Syntax http lt servername gt cgi bin viewer recall cgi recall lt value gt amp channel lt value gt amp return lt return page gt PARAMETER VALUE DESCRIPTION Text string less than 30 One of the present positions to recall channel lt 0 n 4 gt Channel of the video source return lt return page gt Redirect to the page lt return page gt after the parameter is assigned The lt return page gt can be a full URL path or relative path according to the current path If you omit this parameter it wil
32. of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense CE Mark Warning This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures to correct this interference C Tick Warning This is a class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures VCCI Warning TORE J7TAARES CT COREE REA CHAT OCBRMASeSIERCTCEMH WET COMBICISERAAD BIER BT SCKIBKENECKMHVET Liability VIVOTEK Inc cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice VIVOTEK Inc makes no warranty of any kind with regard to the material contained within this document including but not limited to the implied warranties of merchantability and fitness for any particular purpose
33. r n lt parameter pair gt where lt parameter pair gt is lt parameter gt lt value gt r n lt parameter pair gt lt length gt is the actual length of content Example Request IP address and its response 102 User s Manual Set Server Parameter Values Note The access right depends on the URL directory Method GET POST Syntax http lt servername gt cgi bin anonymous setparam cgi lt parameter gt lt value gt amp lt parameter gt lt value gt amp update lt value gt amp return lt return page gt http lt servername gt cgi bin viewer setparam cgi lt parameter gt lt value gt amp lt parameter gt lt value gt amp update lt value gt amp return lt return page gt http lt servername gt cgi bin operator setparam cgi lt parameter gt lt value gt amp lt parameter gt lt value gt amp update lt value gt amp return lt return page gt http lt servername gt cgi bin admin setparam cgi lt parameter gt lt value gt amp lt parameter gt lt value gt amp update lt value gt amp return lt return page gt PARAMETER VALUE DESCRIPTION lt group gt _ lt name gt value to assigned Assign lt va ue gt to the parameter lt group gt _ lt name gt update lt boolean gt Set to 1 to update all fields no need to update parameter in each group lt return page gt Redirect to the page lt return page gt after the parameter is
34. some network environments Users inside a firewall can utilize this protocol to allow streaming data through MP4 Saving Options MP4 Saving Options Folder c Record File name prefix CLIP Add date and time suffix to file name Users can record live video as they are watching it by clicking E Start MP4 Recording on the main page Here you can specify the storage destination and file name Folder Specify a storage destination for the recorded video files File name prefix Enter the text that will be appended to the front of the video file name Add date and time suffix to the file name Select this option to append the date and time to the end of the file name gt CLIP 20100504 180853 ft File name prefix Date and time suffix The format is YYYYMMDD_HHMMSS Local Streaming Buffer Time Local streaming buffer time 0 Millisecond Save Due to the unsteady bandwidth flow the live streaming may lag and not be very smoothly If you enable this option the live streaming will be stored on the camera s buffer area for a few seconds before playing on the live viewing window This will help you see the streaming more smoothly If you enter 3000 Millisecond the streaming will delay 3 seconds Configuration Click Configuration on the main page to enter the camera setting pages Note that only Administrators can access the configuration page VIVOTEK offers an easy to use user interface that helps you set up your n
35. that will be appended to the front of the file name For example 4 Video_20100607_100341 LA File name prefix Date and time suffix The format is YYYYMMDD_HHMMSS Click Save to enable the settings then click Close to exit the page system log Select to send a system log when a trigger is activated Click Save to enable the settings then click Close to exit the page When completed click Save to enable the settings and click Close to exit this page The new media settings will appear on the Event Settings page You can continue to select a server and media type for the event Please go back to page 66 for detailed information _ Add Server Add Media Server Media Extra parameter oso Non J Video Clip System log Create folders by date time and hour automatically J NAS None J Email None M H HTTP None v m SD Test Click to test your SD card The system will display a message indicating success or failure If you want to use your SD card for local storage please format it before use Please refer to page 86 for detailed information m Create folders by date time and hour automatically If you check this item the system will generate folders automatically by date m View Click this button to open a file list window This function is only for SD card and Network Storage If you click View button of SD c
36. the Event Settings page You can go to Application gt Event Settings gt Trigger to choose it as a trigger source Please refer to page 75 for detailed information NOTE P How does motion detection work Enable mobon detection Windows gt gt it nA g Di p There are two motion detection parameters Sensitivity and Percentage In the illustration above frame A and frame B are two sequential images Pixel differences between the two frames are detected and highlighted in gray frame C and will be compared with the sensitivity setting Sensitivity is a value that expresses the sensitivity to moving objects Higher sensitivity settings are expected to detect slight movements while smaller sensitivity settings will neglect them When the sensitivity is set to 70 the Network Camera defines the pixels in the purple areas as alerted pixels frame D Percentage is a value that expresses the proportion of alerted pixels to all pixels in the motion detection window In this case 50 of pixels are identified as alerted pixels When the percentage is set to 30 the motions are judged to exceed the defined threshold therefore the motion window will be outlined in red For applications that require a high level of security management it is suggested to use higher sensitivity settings and smaller percentage values Camera Control This section explains how to control the Network Camera s Pan Tilt Zo
37. when the video mode is set to H 264 or MPEG 4 H 264 MPEG 4 Protocol Options H 264 MPEG 4 Protocol Options UDP Unicast UDP Multicast Tcp O HTTP Depending on your network environment there are four transmission modes of H 264 or MPEG 4 streaming UDP unicast This protocol allows for more real time audio and video streams However network packets may be lost due to network burst traffic and images may be broken Activate UDP connection when occasions require time sensitive responses and the video quality is less important Note that each unicast client connecting to the server takes up additional bandwidth and the Network Camera allows up to ten simultaneous accesses UDP multicast This protocol allows multicast enabled routers to forward network packets to all clients requesting streaming media This helps to reduce the network transmission load of the Network Camera while serving multiple clients at the same time Note that to utilize this feature the Network Camera must be configured to enable multicast streaming at the same time For more information please refer to RTSP Streaming on page 48 TCP This protocol guarantees the complete delivery of streaming data and thus provides better video quality The downside of this protocol is that its real time effect is not as good as that of the UDP protocol HTTP This protocol allows the same quality as TCP protocol without needing to open specific ports for streaming under
38. 0 1 100 1 100 1 125 1 120 1 180 1 150 1 250 1 215 1 500 1 425 1 1000 1 1000 1 2000 1 1750 1 4000 1 3500 1 10000 1 6000 shutterspeed 0 14 1 2 1 2 1 4 1 3 1 8 1 6 O 1 15 1 12 1 30 1 25 1 60 1 50 VIVOTEK 6 gt 1 100 1 100 7 gt 1 125 1 120 8 gt 1 180 1 150 9 gt 1 250 1 215 10 gt 1 500 1 425 11 gt 1 1000 1 1000 12 gt 1 2000 1 1750 13 gt 1 4000 1 3500 14 gt 1 10000 1 6000 O 15 0 gt 0dB 1 gt 2dB 2 gt 4dB 3 gt 6dB 4 gt 8dB 5 gt 10dB 6 gt 12dB 7 gt 14dB 8 gt 16dB 9 gt 18dB 10 gt 20dB 11 gt 22dB 12 gt 24dB 13 gt 26dB 14 gt 28dB penableblc lt Boolean gt 4 4 Enable backlight compensation Group ircutcontrol daymodebegintime 00 00 23 59 Day mode begin time daymodeendtime 00 00 23 59 Day mod end time Group audioin_c lt O n 1 gt for n channel products capability audioin gt 0 User s Manual 119 S lt 0 m 1 gt _codectype aac4 gamr Set audio codec type for input S lt O0 m 1 gt _aac4_bitrate 16000 4 4 Set AAC4 bitrate in bps 32000 48000 64000 96000 128000 S lt 0 m 1 gt _gamr_bitrate Set AMR bitrate in bps Group tmage_c lt O n 1 gt for n channel products NAME VALUE SECURITY DESCRIPTION _ get set Group imagepreview_c lt O n 1 gt for n channel products NAME VALUE SECURITY DESCRIPTION get set brightness lt product
39. 1 500 g Power 12V DC Power consumption Max 11 4W Bs CE LVD FCC VCCI C Tick Operating Temperature 0 40 C 34 104 F Environments Humidity 90 RH Viewing System Requirements Installation Management and Maintenance OS Microsoft Windows 7 Vista XP 2000 Browser Mozilla Firefox Internet Explorer 6 x or above Cell phone 3GPP player Real Player 10 5 or above Quick Time 6 5 or above lt Installation Wizard 2 lt 32 CH ST 501 recording software Image Settings Adjustable image size quality and bit rate Time stamp and text caption overlay Flip amp mirror Configurable brightness contrast saturation sharpness white balance and exposure AGC AWB AES Automatic manual or scheduled day night mode BLC Backlight Compensation Supports privacy masks Audio Compression GSM AMR speech encoding bit rate 4 75 kbps to 12 2 kbps MPEG 4 AAC audio encoding bit rate 16 kbps to 128 kbps G 711 audio encoding bit rate 64 kbps u Law or A Law mode selectable Interface External microphone inputAudio output Supports two way audio via SIP protocol Supports audio mute Applications Supports firmware upgrade SDK available for application development and system integration Warranty 24 months All specifications are subject to change without notice Copyright 2010 VIVOTEK INC All rights reserved User s M
40. 10 cqi bin upload cai Username Password Network storage m URL Enter the URL of the HTTP server m User name Enter the user name if necessary Password Enter the password if necessary To verify if the HTTP settings are correctly configured click Test The result will be shown in a pop up window as below If successful you will receive a test txt file on the HTTP server F hitp 192 168 5 121 egi binfadminftestserver cgi WASI hitp 192 168 5 121 egi binfadminftestserver cgi a O K HTTF Transmission successfully Thanks HTTF Transmission failed Click Save to enable the settings then click Close to exit the page Network storage Select to send the media files to a network storage location when a trigger is activated Please refer to Network Storage Setting on page 86 for details Click Save to enable the settings then click Close to exit the page When completed the new server settings will automatically be displayed on the Event Settings page For example Add Server Add Media Server Media Extra parameter mso none t view Fl Fre None _ Create folders by date time and hour automatically O Nas None Email fone E HTP None p Media Settings Click Add Media on the Event Settings page to open the Media Settings page On this page you can specify the type of media that will be sent when a trigger is activated A tot
41. 6 IR Cut Control Day mode Jan 13 04 03 18 automount6 4 mount mounting dewmmecblk0p1 on mntauto CF failed No such device or address Jan 13 04 03 16 automount6 4 mount generic failed to mount dewmmecblk0p1 type vfat on mntauto CF Jan 13 04 03 18 automount698 mount mounting dewmmecblk0p1 on mntauto CF failed No such device or address Jan 13 04 03 18 automount 698 mount generic failed to mount dewmmeblk0p1 type vfat on mnt auto CF Jan 13 04 03 19 SYS Serial number 0002D1FD81C0 Jan 13 04 03 19 SYS System starts at Thu Jan 13 04 03 19 UTC 2000 This column displays the system log in chronological order The system log is stored in the Network Camera s buffer area and will be overwritten when reaching a certain limit gt VIVOTEK View Parameters The View Parameters page lists the entire system s parameters in alphabetical order If you need technical assistance please provide the information listed on this page Parameter List system hostname l2x Zoom Speed Dome Network Camera system ledoff 0 system date 2010 06 21 system time 16 22 08 system datetime system ntp system timezoneindex 320 system daylight enable 0 system daylight dstactualmode 1 system daylight auto begqintime NONE system daylight auto endtime NONE system daylight timezones 360 320 280 240 241 200 201 1 system updateinterval 3600 system info modelname
42. 9 gt DAS 128 eg Ea eee Coes A ki aa Cater melt Pan TE CS Aa 5 Ai Enable UPnP port forwarding To access the Network Camera from the Internet select this option to allow the Network Camera to open ports on the router automatically so that video streams can be sent out from a LAN To utilize of this feature make sure that your router supports UPnP and it is activated Network Camera 192 168 4 166 F Ai UE ica pel eid hold oe 4 PPPoE Point to point over Ethernet Select this option to configure your Network Camera to make it accessible from anywhere as long as there is an Internet connection Note that to utilize this feature it requires an account provided by your ISP Follow the steps below to acquire your Network Camera s public IP address 1 Set up the Network Camera on the LAN 2 Go to Home gt Configuration gt Application gt Server Settings please refer to Server Settings on page 79 to add a new email or FTP server 3 Go to Configuration gt Application gt Media Settings please refer to Media Settings on page 82 Select System log so that you will receive the system log in TXT file format which contains the Network Camera s public IP address in your email or on the FTP server 4 Go to Configuration gt Network gt Network Type Select PPPoE and enter the user name and password provided by your ISP Click Save to enable the setting Network Type LAN PPPoE Us
43. AT 0516621 ES PAT 0516621 FR PAT 0516621 GB PAT 0516621 GR PAT 0516621 IT PAT 0516621 LI PAT 0516621 LU PAT 0516621 NL PAT 0516621 SE PAT 0516621 US PAT 5444816 AT PAT 819303 AT E 198805T1 AU PAT 697256 BE PAT 819303 BR PAT 9604838 7 CA PAT 2216315 CH PAT 819303 CN PAT ZL96193827 7 DE PAT 819303 DE69611607T2 DK PAT 819303 ES PAT 819303 EP PAT 819303 FR PAT 819303 GB PAT 819303 IT PAT 819303 JP PAT APP 8 529817 NL PAT 819303 SE PAT 819303 US PAT 5664053 THE LIST MAY BE UPDATED FROM TIME TO TIME BY LICENSORS AND A CURRENT VERSION OF WHICH IS AVAILABLE ON LICENSOR S WEBSITE AT HTTP WWW VOICEAGE COM Electromagnetic Compatibility EMC FCC Statement This device compiles with FCC Rules Part 15 Operation is subject to the following two conditions m This device may not cause harmful interference and m This device must accept any interference received including interference that may cause undesired operation This eguipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the installation manual may cause harmful interference to radio communications Operation
44. Create Certificate Request Completed Copy the PEM format request below and send itto a CA for identify validation After that you have to install it by clicking the Upload button on HTTPS page Certificate Request PEM format MIIBuULCCASECADESMOSvCOYDVOQGEvJ UY zERMASGA1IUECEMIUHJwdmluY2UxEJAQ EgMVEAcTCUNpdHkgTmFt 2TEAMBQGGALUECHHRTS JnYWSpemFOaloulEShbwuxk lag Bon VB aAsTCyVuaxkogTmFt 2TETMBEGALIUE Sx MES YaiqowReenVeczCcCBnzeziaNbBGQkqhkiG OwOBAQEF A208 J Od GYECGYE AUOTTSEYS2 gssyPFMx es wHdOlobPescsszLUux9DFwo OMRKEuRF axFDEN 5x2K ES5So0EPRBPQ 7 yhH ed0hSe2 VEFSLGSThWSSoxrWVuLhsvReU wmcD f hiIx664d7 mibnTWcsoGFaxghyhaLexT he leDCUuYnkRgh EpENj Exw VoM Ure AwE Asad AM ADGCS GS IbIDOEBROUAASGBRAAVAZWOaL Ec EUsdyFgTxOvolDy so FOTRbnDOOG1TSe4frIsrRODLTvIINj g3 Rees 4568603 pME le qLYobBrtasqdcugqcociz SObLG1lsubWssr 6Pngabwy YoTposqlevUPdI 2LavmdL3 neSur THARSOScCcHooGcrtaAt FISH II Vk ICeohyY 32 User s Manual 5 Look for a trusted certificate authority that issues digital certificates Enroll the Network Camera Wait for the certificate authority to issue a SSL certificate click Browse to search for the issued certificate then click Upload in the second column Create and install certificate method gt Create self signed certificate automatically Create self signed certificate manually Create certificate request and install Cerificate request select certificate file Certificate Information sta
45. Information will automatically be displayed in the third column as shown below You can click Property to see detailed information about the certificate Certificate Information Status Country State or province Locality Organization Organization Unit Common Name Remove Create certificate and install Select this option if you want to create a certificate from a certificate authority 1 Select this option 2 Click Create to open the Create Certificate page then click Save to generate the certificate Create and install certificate method Create seltsigned certificate automatically Create seltsigned certificate manually Create certificate request and install Certificate request Select certificate file PJ Browse Upload User s Manual 31 VIVOTEK Create Certificate Country State or province Locality Organization Vivotek Inc Organization Unit Vivotek Inc Common Name Validity Please wait while the certificate is being 3 If you see the following Information bar click OK and click on the Information bar at the top of the page to allow pop ups E HWI NS cogent nior kaaa E LA re Pee TEA E Ow O DAO prm trom e aas pitna ie is nah E Pari biako Ta wan this gerug or aklina enters dich hone Y VIVOTEK Pn Tee as oe WA infarmalion Har 4 The pop up window shows an example of a certificate request
46. P address of the Network Camera in the address field to resume the connection Restore Restore Restore all settings to factory default except settings in Network Type Daylight Saving Time Custom language This feature allows you to restore the Network Camera to factory default settings Network Type Select this option to retain the Network Type settings please refer to Network Type on page 35 Daylight Saving Time Select this option to retain the Daylight Saving Time settings please refer to system on page 26 Custom Language Select this option to retain the Custom Language settings If none of the options is selected all settings will be restored to factory default The following message is displayed during the restoring process The device is rebooting now Your browser will reconnect to http 192 168 5 151 80 If the connection fails please manually enter the above IP address in your browser Export Upload Files This feature allows you to Export Upload daylight saving time rules custom language files and setting backup files Export files Export daylight saving time configuration file Export Export language file Export Export setting backup file Export Upload files Update daylight saving time rules a Upload Update custom language file Browse Upload Upload setting backup file Browse Upload Export daylight saving time configuration file Cl
47. RITY DESCRIPTION get set privilege_do view Operator 6 6 Indicate which privileges and above can control admin digital output 6 6 privilege_camctrl view Operator Indicate which privileges and above can control PTZ admin operator admin user_i lt 1 20 gt _ viewer User privilege privilege operator admin Group network SECURITY DESCRIPTION get set Network connection type Stop related process before setting port value resetip lt boolean gt 6 6 1 gt Get ipaddress subnet router dns1 dns2 from DHCP 0 gt Use preset ipaddress subnet rounter dnsi and dns2 server at next reboot lt ip address gt Secondary WINS server DESCRIPTION enable Enable disable IEEE 802 1x eapmethod eap peap Selected EAP method Subgroup of network ieee8021x eap tls identity_peap String 64 identity_tls String 64 password String 254 6 privatekeypassword String 254 6 ca_exist lt boolean gt ca size lt integer gt CA file size in bytes certificate erist lt boolean gt Certificate installed flag for TLS Certificate installed time Represented in EPOCH Certificate file size in bytes certificate time lt integer gt 6 6 6 6 6 6 6 6 6 7 6 6 6 7 6 7 certificate_size lt integer gt privatekey_exist Private key installed flag for TLS privatekey_time Private key installed time Represented in EPOCH privatekey_size Private key file size in bytes Subgroup
48. S5D81X1 system info extendedmodelname SDe1x1 system info serialnumber 0002D10934A6 system info firmwareversion SD8141 VVIK 0100b2 system info language count S system info language 10 English system info language 11 Deutsch system info language i2 Espanol system info language i3 Fran ais system info language 14 Italiano system info language i5 H4i system info language i6 Portugu s system info language i 7 f j op 3t system info language i8 Sweox system info language 15 system info language il0 system info language 111 gt system info language 112 gt system info language 113 system info language 114 system info language il5 system info language 116 gt system info language 117 gt w A mM u lt a gt User s Manual 95 Maintenance This chapter explains how to restore the Network Camera to factory default upgrade firmware version etc Reboot Reboot Reboot the device This feature allows you to reboot the Network Camera which takes about one minute to complete When completed the live video page will be displayed in your browser The following message will be displayed during the reboot process The device is rebooting now Your browser will reconnect to httpv 192 166 5 157 80 lf the connection fails please manually enter the above IP address in your browser If the connection fails after rebooting manually enter the I
49. SD8111 SD8121 H 264 12x Zoom Day amp Night 3D Noise Reduction ron l F i nvoTeK T W E Eoo Rev 1 2 Table of Contents WA ee ee ee E eT ae ean ee ene eer Nie ee E eT ee ee nee ee ee 3 Road BEIG SS aar sc tec ante ee si cic tne rite N EA EA EEE E E A 3 PAC RAC CONE AA E E EE AAEE A E 3 Py S1Ga JOS CIPI Ola AI 4 EIE WA apse teeter es ere ee oe ore epee eee 6 Hardware nstallati AA Wa 6 Network Deployment cccccccccseseceeseeseseeceseecssuecsaeecseecsaseesaeeesaueesecensaeeseusessagsessueensseeseseeseseeeneetenes 10 Software Installation sds aesscdsoecrciticorscadoosiaw ors qessnndiuenieiginnssiaeencionsnotansdiiesalaalensinunasivabensinasdetuenaeigadienndtiondaeumedhganoaemenbancdiaise 12 Read O USE eie a EE AMO DE OA MAO E MARU MBINU YAPI MAUA RE AI EE MIA AI AUA WATIE MAMI aba 13 FP IRE NSW CANOT aaa 14 Using Web Bow aaa 14 Usmo RISP PI AA AA 16 Using 3GPP compatible Mobile DECVICES wwwmmwmama mmama mama mwninwwniwwnanu ninini ninini nunuzi kununa nwnia 17 Using VIVOTEK Recording Software se tecsicccdieccveietacivvedduaerctssiesesncts doahdatavadedswasaesaaeecutedesdlaauewdeddesaulawcdeds 18 Pe iii 19 Cle SEUNS WI aa 23 UA NA Ia 25 va SII DEEE EIEN AN EE SAA ope ds MEDIA MANAPUBUWA A TA T AEE AE T 26 SOC E E AAA EA 28 ATE a i AE E EEE EA E AA E E EE AE A E 29 ONNE AAA MAKOSA T E E T E T KA MANA WAKA eee 34 NA IA AA aa 35 BA WW WA NAA MAANA MAUA OE LIWAI WA TE O E MANUEL O
50. UE DESCRIPTION cmd_type lt string gt Required Command to be executed including search insert delete update and gqueryStatus Command search PARAMETER VALUE DESCRIPTION lt integer primary key gt Optional The integer primary key column will automatically be assigned a unique integer triggerType lt text gt Optional Indicate the event trigger type Please embrace your input value with single quotes Ex mediaType motion Support trigger types are product dependent mediaType lt text gt Optional Indicate the file media type Please embrace your input value with single quotes Ex mediaType videoclip Support trigger types are product dependent destPath lt text gt Optional Indicate the file location in camera Please embrace your input value with single quotes Ex destPath mnt auto CF NCMF abc mp4 resolution lt text gt Optional Indicate the media file resolution Please embrace your input value with single quotes Ex resolution 800x600 isLocked lt boolean gt Optional Indicate if the file is locked or not 0 file is not locked 1 file is locked A locked file would not be removed from UI or cyclic storage triggerTime lt text gt Optional Indicate the event trigger time not the file created time Format is YYYY MM DD HH MM SS Please embrace your input value with single quotes Ex triggerTime 2008 01 01 00 00 00 If you want to search for
51. UE SECURITY DESCRIPTION port 554 1025 65535 RTSP port ae capability protocol rtsp 1 anonymousviewing lt boolean gt Enable anoymous streaming viewing authmode disable 1 6 RTSP authentication mode basic capability protocol rtsp 1 digest sOQ_accessname string 32 1 6 RTSP access name for streami capability protocol rtsp 1 and video stream count gt 0 S1_accessname string 32 1 6 RTSP access name for stream2 capability protocol rtsp 1 and am S2_accessname string 32 1 6 RTSP access name for stream3 capability protocol rtsp 1 and video stream count gt 2 S3_accessname string 32 RTSP access name for stream4 capability protocol rtsp 1 and video stream count gt 3 SO_audiotrack lt integer gt The current audio track for streami 1 gt audio mute S1_audiotrack lt integer gt The current audio track for stream2 1 gt audio mute S2_audiotrack lt integer gt The current audio track for stream2 1 gt audio mute S3_audiotrack lt integer gt The current audio track for stream2 1 gt audio mute Subgroup of network_rtsp_s lt O n 1 gt multicast n is stream count capability protocol rtp multicast 1 NAME VALUE SECURITY DESCRIPTION get set Multicast time to live value Subgroup of network sip NAME VALUE SECURITY DESCRIPTION port 1025 65535 SIP port pe pares capability protocol sip 1 Subgroup of network rtp NAME VALUE SECURITY DESCRIPTION
52. Video Settings on page 55 Video and Audio Control Buttons Depending on the Network Camera model and Network Camera configuration some buttons may not be available DI Snapshot Click this button to capture and save still images The captured images will be displayed in a pop up window Right click the image and choose Save Picture As to save it in JPEG jpg or BMP bmp format P Digital Zoom Click and uncheck Disable digital zoom to enable the zoom operation The navigation screen indicates the part of the image being magnified To control the zoom level drag the slider bar To Start MP4 Recording Click this button to record video clips in MP4 file format to your computer Press the a Stop MP4 Recording button to end recording When you exit the web browser video recording stops accordingly To specify the storage destination and file name please refer to MP4 Saving Options on page 24 for details Full Screen Click this button to switch to full screen mode Press the Esc key to switch back to normal mode Client Settings This chapter explains how to select the stream transmission mode and saving options on the local computer When completed with the settings on this page click Save on the page bottom to enable the settings H 264 MPEG 4 Media Options H 264 MPEG 4 Media Options Video and Audio Video Only Audio Only Select to stream video or audio data or both This is enabled only
53. a email when a trigger is activated Serwer name Email Server Type 9 Email sender email address Cameragwivotek com Recipient email address VIVOTEK vivotek com Serwer address Ms vivotek tw User name Password Server port 25 This server requires a secure connection SSL FTP HTTP Network storage m Sender email address Enter the email address of the sender m Recipient email address Enter the email address of the recipient m Server address Enter the domain name or IP address of the email server m User name Enter the user name of the email account if necessary Password Enter the password of the email account if necessary m Server port The default mail server port is set to 25 You can also manually set another port If your SMTP server requires a secure connection SSL check This server requires a secure connection SSL To verify if the email settings are correctly configured click Test The result will be shown in a pop up window If successful you will also receive an email indicating the result n p hipan FAGS IE Ae pa be ll i ee ee E E a Bele ee ee peel ee ele Pee a The amal hit besi ten Emor in senting email Click Save to enable the settings then click Close to exit the page FTP Select to send the media files to an FTP server when a trigger is activated Server name Server Type Email FTP server address fip vivotek com Server port 21 Usern
54. abled Enable cyclic storage method autocleanup_enabled lt boolean gt 6 6 Enable automatic clean up method Expired and not locked media files will be deleted autocleanup_maxage lt positive integer gt 6 6 To specify the expired days for automatic clean up Drive the Digital Output Note This reguest reguires Viewer privileges Method GET POST Syntax http lt servername gt cgi bin dido setdo cgi do1 lt state gt amp do2 lt state gt amp do3 lt state gt amp do4 lt state gt amp return lt return page gt Where state is 0 or 1 O means inactive or normal state while 1 means active or triggered state PARAMETER VALUE DESCRIPTION do lt num gt 0 1 0 Inactive normal state 1 Active triggered state lt return page gt Redirect to the page lt return page gt after the parameter is assigned The lt return page gt can be a full URL path or relative path according to the current path If you omit this parameter it will redirect to an empty page Example Drive the digital output 1 to triggered state and redirect to an empty page heb 7 mlyeerver cgi bin dido e ada a ol 3D Privacy Mask Note This request requires admin user privilege You can set privacy mask only at zoom 1x To go back to zoom 1x directly please send this cgi command cgi bin camctrl camposition cgi setzoom 0 Method GET POST Syntax http lt servername gt cgi bin admin setpm3d cg
55. al of 5 media settings can be configured Media name Enter a name for the media setting Media Type There are three choices of media types available Snapshot Video Clip and System log Select the item to display the detailed configuration options You can configure either one or all of them Snapshot Select to send snapshots when a trigger is activated Media name Snapshot Media Type Snapshot Source Stream1 w send 1 pre event image s 0 7 send 1 post event image s 0 7 File name prefix Snapshot Add date and time suffix to file name Video Clip System log Save Close m Source Select to take snapshots from stream 1 4 m Send pre event images The Network Camera has a buffer area it temporarily holds data up to a certain limit Enter a number to decide how many images to capture before a trigger is activated Up to 7 images can be generated m Send L post event images Enter a number to decide how many images to capture after a trigger is activated Up to 7 images can be generated For example if both the Send pre event images and Send post event images are set to 7 a total of 15 images are generated after a trigger is activated Aa N Trigger Activation m File name prefix Enter the text that will be appended to the front of the file name m Add date and time suffix to the file name Select this option to add
56. alyzed please click Next to continue the program MA e a a E ET J 1 ah kikali Wid T gt Berek Pape E Installation Wizard 2 installation Wizard 2 Your nebvork niiranmment was analyzed tE below Private DHCP The wizard is anabhyziig your network environment i al Firsat walt a moment ea crc 3 The program will search for all VIVOTEK network devices on the same LAN 4 After searching the main installer window will pop up Click on the MAC and model name which matches the product label on your device to connect to the Network Camera via Internet Explorer Network Camera VIVOTEK Model No SD8121 MAC 0002D107258A N11360 um FE Ce rons Class A Device Selection Select q Bewice je sisp oP pads P N XXXXXXXXXG Made in Taiwan Mlama check fhe MOC ami ieee mame be the product betel af pout dovwiow fin lhaa FOU can man i Nek te pen dorice opi shaw Be main waren by deuble clicking the Ham in iha obera selection li li Fou Bie Hel able l ind uti davla a iha abawa geldeclas lisi plima maki uma oll cables are piopariy connected jo yor device and Then clock on She Rees Deiren bitasi You cos Mnd the joe labhal ba the roads been pan of pou evice Ready to Use 1 Access the Network Camera on the LAN 2 Retrieve live video through a web browser or recording software VIVOTEK 12x Zoom Speed Dome Network Camera WW Vwivwi Tris om Video Stream SE Digital Out
57. ame vivotek Password TELE FTF folder name Passive mode O T TIF a Network storage Tes Sze m Server address Enter the domain name or IP address of the FTP server m Server port By default the FTP server port is set to 21 It can also be assigned to another port number between 1025 and 65535 m User name Enter the login name of the FTP account Password Enter the password of the FTP account m FIP folder name Enter the folder where the media file will be placed If the folder name does not exist the Network Camera will create one on the FTP server m Passive mode Most firewalls do not accept new connections initiated from external requests If the FTP server Supports passive mode select this option to enable passive mode FTP and allow data transmission to pass through the firewall To verify if the FTP settings are correctly configured click Test The result will be shown in a pop up window as shown below If successful you will also receive a test txt file on the FTP server F hittp 192 168 5 121 egi binfadminitestserver cai E 0 R E htip 192 168 5 121 cgi bin admin testserver cgi E 0 R ftp transmission successfully ftp transmission failed Click Save to enable the settings then click Close to exit the page HTTP Select to send the media files to an HTTP server when a trigger is activated Server name Server Type Email FTP HTTP URL http 192 168 5
58. ansmission protocol and media options for H 264 MPEG 4 video streaming For further configuration please refer to Client Settings on page 23 Time Display the current time For further configuration please refer to Video Settings on page 55 Title and Time The video title and time can be stamped on the streaming video For further configuration please refer to Video Settings on page 55 Video and Audio Control Buttons Depending on the Network Camera model and Network Camera configuration some buttons may not be available io Snapshot Click this button to capture and save still images The captured images will be displayed in a pop up window Right click the image and choose Save Picture As to save it in JPEG jpg or BMP bmp format Digital Zoom Click and uncheck Disable digital zoom to enable the zoom operation The navigation screen indicates the part of the image being magnified To control the zoom level drag the slider bar To move to a different area you want to basi aa the navigation screen 0 400 nuj Pause Pause the transmission of the streaming media The button becomes the gt Resume button after clicking the Pause button s Stop Stop the transmission of the streaming media Click the gt Resume button to continue transmission o Start MP4 Recording Click this button to record video clips in MP4 file format to your computer Press the Stop MP4 Recording button to end recording When you
59. anual 149 Technology License Notice MPEG 4 AAC Technology THIS PRODUCT IS LICENSED UNDER THE MPEG 4 AAC AUDIO PATENT LICENSE THIS PRODUCT MAY NOT BE DECOMPILED REVERSE ENGINEERED OR COPIED EXCEPT WITH REGARD TO PC SOFTWARE OF WHICH YOU MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOSES FOR MORE INFORMATION PLEASE REFER TO HTTP WWW VIALICENSING COM MPEG 4 Visual Technology THIS PRODUCT IS LICENSED UNDER THE MPEG 4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON COMMERCIAL USE OF A CONSUMER FOR i ENCODING VIDEO IN COMPLIANCE WITH THE MPEG 4 VISUAL STANDARD MPEG 4 VIDEO AND OR ii DECODING MPEG 4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG 4 VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA LLC PLEASE REFER TO HITTP MWWW MPEGLA COM AMR NB Standard THIS PRODUCT IS LICENSED UNDER THE AMR NB STANDARD PATENT LICENSE AGREEMENT WITH RESPECT TO THE USE OF THIS PRODUCT THE FOLLOWING LICENSORS PATENTS MAY APPLY TELEFONAKIEBOLAGET ERICSSON AB US PAT 6192335 6275798 6029125 6424938 6058359 NOKIA CORPORATION US PAT 5946651 6199035 VOICEAGE CORPORATION AT PAT 0516621 BE PAT 0516621 CA PAT 2010830 CH PAT 0516621 DE PAT 0516621 DK P
60. ard a Local storage page will pop up for you to manage recorded files on SD card For more information about Local storage please refer to page 90 for illustration If you click View button of Network storage a file directory window will pop up for you to view recorded data on Network storage For detailed illustration please refer to the next page The following is an example of a file destination with video clips C 20100605 The format is YYYYMMDD 20100606 Click to open the directory H m 20100607 Click to delete selected items Click to delete all recorded data Click 20100607 to open the directory The format is HH 24r Click to open the file list for that hour lt 07 08 09 10 11 12 13 14 15 16 17 2 Wa ui video ciip_se mpa 252600 2010706707 o7 ssiz0 video ciip_se mpa 2563536 2010 06 07 07159128 Click to delete Click to go back to the previous selected items level of the directory Click to delete all recorded data lt 07 08 09 10 11 12 13 14 15 16 17 gt Pa file name size date time CA video Clip 58 2526004 2010 06 07 07 58 28 E Video Clip 59 mp4 2563536 2010 06 07 07 59 28 Delete Delete all The format is File name prefix Minute mm You can set up the file name prefix on Media Settings page Please refer to page 82 for detailed information Recording This section explains how to configure the recording settings for the Network Camera Recording Settin
61. art of the component will be installed To see what s included in a component click Details Subcomponents of Networking Services G FIP Listener 0 0 MB Simple TCP IP Services Universal Plug and Play E Description Listens for route updates sent by routers that use the Routing Information Protocol version 1 AIP 1 Total disk space required 0 0 ME Space available on disk 12125 4 MB 5 Click Next in the following window Windows Components Wizard Winmkomt Minga de Cari bidoi aa oi Waites To ede cw serve a commoner thei the haiba Ahaa bee maa fel ond poe oltre comeoncel sal by maised Ts nee whol precluded an a compeanerd clk Deini kumani SP Wai uag BOY A X WP Sh mjali ra S Tas ME maan Saraca a Litter Herink File end Piri Heredi 2 0 Mo wA ali irisa Fleder aie Ana Deen Cont a vane ened eran ARI cance aed pices Total iik cts tare WD Me Data Saa lal es or eed Wits MH _ 6 Click Finish UPnP is enabled gt How does UPnP work UPnP networking technology provides automatic IP configuration and dynamic discovery of devices added to a network Services and capabilities offered by networked devices such as printing and file sharing are available among each other without the need for cumbersome network configuration In the case of Network Cameras you will see Network Camera shortcuts under My Network Places gt Enabling UPnP port forwarding allows the Networ
62. ble HTTPS secure connection then select a connection option HTTP amp HTTPS or HTTPS only 3 Click Save to generate a certificate Enable HTTPS To enable HTTPS you have to create and install certificate first Enable HTTPS secure connection HTTP amp HTTPS HTTPS only Please wait while the certificate is being generated Create self signed certificate manually Create certificate request and install Certificate Information Status 4 The Certificate Information will automatically be displayed in the third column as shown below You can click Property to view detailed information about the certificate Certificate Information Status Country TW State or province Asia Locality Asia Organization Vivotek Inc Organization Unit Vivotek Inc Common Name www vivotek com 5 Click Home to return to the main page Change the address from http to https in the address bar and press Enter on your keyboard Some Security Alert dialogs will pop up Click OK or Yes to enable HTTPS https A Network Camera Microsoft Internet Explorer File Edit iew Favorites Tools Help x pe pP F T gt za YA A Back gt x E A Pa Search gr Favorites YA YA ge 4 g https 192 168 14 166 index html Addres VIVOTEK 12x Zoom Speed Dome Network Camera Li U d S et e a n Video Stream v m43 ES Auto ea Fa Soy Ea 25 Dig
63. capability version system firmwareversion Model name of the server Ex IP3133 VVTK 0100a CapVersion MMmm MM is major version from 00 99 Capability field version mm is minor version from 00 99 ex 0100 IP Filtering Note This request requires Administrator access privileges Method GET POST Syntax http lt servername gt cgi bin admin ipfilter cgi method lt value gt amp start lt paddress gt amp end lt ipaddress gt amp index lt value gt amp return lt return page gt PARAMETER VALUE DESCRIPTION addallow Add allowed IP address range to the server Start and end parameters must be specified If the index parameter is specified it will try to add starting from the index position adddeny Add denied IP address range to the server Start and end parameters must be specified If the index parameter is specified it will try to add starting from the index position deleteallow Remove allowed IP address range from server If start and end parameters are specified it will try to remove the matched IP address If index is specified it will try to remove the address from given index position start end parameters have higher priority then the index parameter deletedeny Remove denied IP address range from server If start and end parameters are specified it will try to remove the matched IP address If index is specified it will try to remove the address from given index position s
64. cbr constant bitrate ratecontrolmode vbr fix quality S lt O m 1 gt _mpeg4_ 0 1 5 Quality of video when choosing vbr in quant ratecontrolmode 0 is the customized manual input setting 1 worst quality 5 best quality s lt 0 m 1 gt _mpeg4_ 1 7 4 The specific quality parameter of the Mpeg4 encoder quantlevel 1 best quality 31 worst quality s lt 0 m 1 gt _mpeg4_ 1000 400 4 4 Set bit rate in bps when choosing cbr in bitrate ratecontrolmode S lt O m 1 gt _mpeg4_ 1 1 4 Set maximum frame rate in fps for MPEG 4 maxframe S lt 0 m 1 gt _mpeg4_ 4 4 Manual video quality level input choose customize qvalue input mpeg4_quant 0 for MPEG 4 S lt O0 m 1 gt _mjpeg_ Quality of JPEG video quant 0 is the customized manual input setting 1 worst quality 5 best quality S lt O0 m 1 gt _mjpeg_ The specific quality parameter of the JPEG encoder quantlevel 2 best quality 97 worst quality S lt O m 1 gt _mjpeg_ 1 Set maximum frame rate in fps for JPEG maxframe S lt O0 m 1 gt _mjpeg_ Manual video quality level input choose customize qvalue input mjpeg_quant 0 for MJPEG whitebalancemode 0 auto tracking white balance 1 white balance control whitebalancecontrol Set different levels to meet different color 0 2600K temperatures 2600K 9600K 1 3200K Set whitebalancemode to 1 before setting this 2 5500K parameter 3 7200K 4 9600k daynight auto sched 4 4 a
65. ce and user defined scripts Upload setting backup file Click Browse to upload a setting backup file Please note that the model and firmware version of the device should be the same as the setting backup file If you have set up a fixed IP or other special settings for your device it is not suggested to upload a settings backup file Upgrade Firmware Upgrade firmware Select firmware file Uporade This feature allows you to upgrade the firmware of your Network Camera It takes a few minutes to complete the process Note Do not power off the Network Camera during the upgrade Follow the steps below to upgrade the firmware 1 Download the latest firmware file from the VIVOTEK website The file is in pkg file format 2 Click Browse and specify the firmware file 3 Click Upgrade The Network Camera starts to upgrade and will reboot automatically when the upgrade completes If the upgrade is successful you will see Reboot system now This connection will close After that re access the Network Camera VIVOTEK The following message is displayed when the upgrade has succeeded Reboot system now This connection will close The following message is displayed when you have selected an incorrect firmware file Starting firmware upgrade Do not power down the server during the upgrade The server will restart automatically after the upgrade is completed This will take about 1 5 minutes
66. configure Media Settings For more information please refer to Media Settings on page 82 Here is an example of the Event Settings page Event name C Enable this event Priority Detect next event after 10 second s Note This can only applied to motion detection and digital input Trigger Video motion detection Periodically Digital input System boot Recording notify Event Schedule w Sun Mon v Tue Wed Thu W Fri Sat Time Always From 00 00 to 24 00 hh mm Action C Trigger digital output for 4 seconds C Move to preset location Note Please configure Preset locations first Add Media a i i TN SD FTP CL Create folders by date time and hour automatically E Nas FI Emai n Hre None 9 TOLTA ESEP E EE i oe EN leg d p Fri 5 a re aE SE oI CIE a a a a 3 User s Manual 77 When completed click Save to enable the settings and click Close to exit Event Settings page The new event settings server settings media settings will appear in the event drop down list on the Application page Here is an example of the Application page with an event setting Event Settings Name Status Sun Mon Tue Wed Thu Fri Sat Time Trigger Eventi ON V W W V W W Vo 00 00 24 00 di ai Ent YA Beet He Server Settings Name Type Address Location FIP fip fip vivotek com NAS ns W192 168 5 122 nas Email email Ws vivotek tw HTTP http h
67. ddresses are on the Access List below can access the Network Camera and the others cannot access On the contrary if you choose Deny Type those clients whose IP addresses are on the Access List below will not be allowed to access the Network Camera and the others can access Filter Then you can add a rule to the following Access List Please note that the IPv6 access list column will not be displayed unless you enable IPv6 on the Network page For more information about IPv6 Settings please refer to page 39 for detailed information Filter IPv4 access list IPv6 access list There are three types of rules Single This rule allows the user to add an IP address to the Allowed Denied list For example filter address Rule Single vi IP address 192 168 2 1 VIVOTEK Network This rule allows the user to assign a network address and corresponding subnet mask to the Allow Deny List For ekample filter address Rule Network Network address Network mask IP address 192 168 2 x will be blocked Range This rule allows the user to assign a range of IP addresses to the Allow Deny List Note This rule is only applied to IPv4 For example filter address rue Range T P adaress IP aderess 19216820 1021082255 Administrator IP address Always allow the IP address to access this device You can check this item and add the Administrator s IP address in this field to make sure the Admi
68. de the Network Camera switches on the IR cut filter at all times to block infrared light from reaching the sensor so that the colors will not be distorted m Night mode In night mode the Network Camera switches off the IR cut filter at all times for the sensor to accept infrared light thus helping to improve low light sensitivity m Schedule mode The Network Camera switches between day mode and night mode based on a specified schedule Enter the start and end time for day mode Note that the time format is hh mm and is expressed in 24 hour clock time By default the start and end time of day mode are set to 07 00 and 18 00 When completed with the settings on this page click Save to enable the settings and click Close to exit the page If you want to configure another sensor setting for day night schedule mode please click Profile to open the Sensor Settings Profile Settings page as shown below 201 WASIO 13 23 53 General Settings Enable this profile This profile is applied to Day mode Night mode Schedule mode Exposure Auto shutter Priority Manual Back light compensation OON OFF Save Close Please follow the steps beolw to setup a profile 1 Check Enable this profile 2 Select the applied mode Day mode Night mode or Schedule mode Please manually enter a range of time if you choose Schedule mode 3 Configure Exposure settings in the second column Please refer to the last page
69. e status and reserved space of your SD card Please remember to format the SD card when using for the first time 5D card management SD card status Ready Total size 7810152 KBytes Free size 7602048 KBytes Used size 208104 KBytes Use Sy 2 665 90 User s Manual SD card control m Enable cyclic storage Check this item if you want to enable cyclic recording When the maximum Capacity is reached the oldest file will be overwritten by the latest one SD card control Enable cyclic storage Enable automatic disk cleanup Maximum duration for keeping files 7 days Save m Enable automatic disk cleanup Check this item and enter the number of days you wish to retain a file For example if you enter 7 days the recorded files will be stored on the SD card for 7 days Click Save to enable your settings Searching and Viewing the Records This column allows the user to set up search criteria for recorded data If you do not select any criteria and click Search button all recorded data will be listed in the Search Results column Searching and viewing the records File attributes Trigger type Digital input Periodically Network fail System boot Recording notify Motion Media Type Video Clip Snapshot Text Locked Locked C Unlocked Trigger time From Date Time to Date Time ywyvy mm dd hh mm ss File attributes Select one or more items a
70. e this to create folders by date time and hour action server i lt 0m4 gt e0 1 6 6 nable The default value is 0 action server i lt 0m4 gt NULL 0 4 6 6 Index of the attached media media se automatically Enable or disable this server action action server i lt 0m4 gt lt boolean gt 6 6 Enable this to create folders by date time and hour datefolder automatically action_goto_enable lt Boolean gt _ 6 6 Enable disable ptz goto preset on event triggered action_goto_name _ string 40 6 6 Preset name that ptz goto on event triggered Group server i lt 0m4 gt PARAMETER VALUE string 40 6 6 Identification of this entry DESCRIPTION 5 g O http uri string 128 ftp port 0 65535 6 6 Port to connect to the server ftp_location string 128 6 6 Location to upload or store the media ftp_ passive 0 1 6 6 Enable or disable passive mode 0 disable passive mode 1 enable passive mode ns_location Location to upload or store the media ns username Username to login to the server ns_passwd Password of the user ns_ workgroup string 64 6 6 Workgroup for network storage 6 6 Indicate the server type email email server ftp FTP server http HTTP server ns network storage Group media_i lt O 4 gt media_freespace is used internally PARAMETER VALUE SECURITY DESCRIPTION type snapshot 6 6 Media type to send to the server or store on the systemlo
71. efer to Setup the Network Camera over the Internet on page 10 To utilize this feature please check the following settings on your Network Camera 1 Because most players on 3GPP mobile phones do not support RTSP authentication make sure the authentication mode of RTSP streaming is set to disable For more information please refer to RTSP Streaming on page 48 2 As the bandwidth on 3G networks is limited you will not be able to use a large video size Please set the video and audio streaming parameters as listed below For more information please refer to video quality settings on page 61 Video Mode MPEG 4 Frame size 176 x 144 Maximum frame rate 5 fps Intra frame period 1S Video quality Constant bit rate 40kbps Audio type GSM AMR 12 2kbps 3 As most ISPs and players only allow RTSP streaming through port number 554 please set the RTSP port to 554 For more information please refer to RTSP Streaming on page 48 4 Launch the player on the 3GPP compatible mobile devices ex Real Player 5 Type the following URL commands into the player The address format is rtsp lt public ip address of your camera gt lt rtsp port gt lt RTSP streaming access name for stream 3 gt For example Enter an Internet URL to open rtsp 192 168 5 151 554 Using VIVOTEK Recording Software The product software CD also contains recording software allowing simultaneous monitoring and video recording for multiple
72. ek gt sunday lt bayor week gt HOURS 2 lt M OUP gt a Endt ime lt fT mez ore Timezone id 241 mame CoMT 06 00 Mexico city gt Upload daylight saving time rule Click Browse and specify the KML file to upload If the incorrect date and time are assigned you will see the following warning message when uploading the file to the Network Camera E caniin dri Motepad BD http 99 168 5 17i biniadminupoad ngi Microsft in a Ed fm Bt i erkinio lM rstcAweekdmeonchs cbayotweek gt Sunday Gayo eeg CHOU be fHOUr Y ig Centeal Time US and Carceday gt Menthe lt Ny bay Cake his Se conde erk non ho payo week gt Sunday Dayar enak s aigra gurs 2 tae tT iHi ue ime lt Shifts 6i 5h1Fts Mere Re LL Hort he Choe Dy enh Trion he resto fae incr ri E gt Sundays Oa yor week s j ay FT mez fT mez eres lt Tinezo p ide 241 nanee GNT 06 00 Mexico City gt The following message is displayed when attempting to upload an incorrect file format Microsoft Internet Explorer fx A The file must have a xml Filename suffix 1 oT Export language file Click to export language strings VIVOTEK provides nine languages English Deutsch Espa ol Francais Italiano A 2558 Portugu s RAR Ax and BRAM Upload custom language file Click Browse and specify your own custom language file to upload Export setting backup file Click to export all parameters for the devi
73. ele to infinity Removable IR cut filter for day amp night function Angle of View 1 7 55 8 Horizontal Shutter Time 1 2 sec to 1 30 000 sec SD8111 1 1 5 sec to 1 30 000 sec SD8121 Image Sensor SONY 1 4 EXview HAD CCD sensor in D1 resolution Minimum gt 0 1 Lux F1 6 Color Illumination 0 01 Lux F1 6 B W Video Compression H 264 MJPEG amp MPEG 4 Streaming Multiple simultaneous streams H 264 streaming over UDP TCP HTTP or HTTPS MPEG 4 streaming over UDP TCP HTTP or HTTPS MPEG 4 multicast streaming MJPEG streaming over HTTP or HTTPS Supports activity adaptive streaming for dynamic frame rate control Supports 3GPP mobile surveillance Frame Rates MPEG 4 Up to 30 25 fps at 720 x 480 SD8111 720 x 576 SD8121 H 264 Up to 30 25 fps at 720 x 480 SD8111 720 x 576 SD8121 MJPEG Up to 30 25 fps at 720 x 480 SD8111 720 x 576 SD8121 Management Four D and one D O for external sensor and alarm Event notification using HTTP SMTP or FTP Local recording of MP4 file On Board SD SDHC card slot Storage Stores snapshots and video clips Security lt Muilti level user access with password protection IP address filtering HTTPS encrypted data transmission 802 1X port based authentication for network protection Users Live viewing for up to 10 clients Dimension 131 mm x 200 mm Weight Net
74. eless 802 11g Indicate the begin channel of wireless network Indicate the end channel of wireless network Indicate whether to support wireless WEP Indicate whether to support wireless WPA Indicate whether to support wireless WPA2 Indicate whether to support the upgrade function for the derivative brand For example if the value is true the VVTK product can be upgraded to VVXX TCVV lt gt TCXxX is excepted Indicate whether to support HTTP tunnel for event control transfer Indicate whether to support joystick control Media files are indexed in database number of any media stream per channel Indicate whether to support Intelligent Video analysis DESCRIPTION Custom script identification of this entry Date of custom script Time of custom script Group event_i lt 0 2 gt PARAMETER VALUE SECURITY get set 0 15 3 2 o D boot di motion seq recnotify triggerstatus String 40 lt integer gt 1 999 5 3 3 a ae S g g NA gt O string 40 o 1 999 i _ a 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 DESCRIPTION Identification of this entry Enable or disable this event Indicate the priority of this event o low priority 1 normal priority 2 high priority Delay in seconds before detecting the next event Indicate the trigger condition boot System boot di Digital input uw motion V
75. em ntp lt domain name gt 6 6 NTP server lt ip address gt Do not use skip to invoke default server for lt blank gt default value timezoneindex 489 529 6 6 Indicate timezone and area 480 GMT 12 00 Eniwetok Kwajalein 440 GMT 11 00 Midway Island Samoa 400 GMT 10 00 Hawaii 360 GMT 09 00 Alaska 320 GMT 08 00 Las Vegas San_Francisco date unchanged Set to auto to use NTP to Vancouver 280 GMT 07 00 Mountain Time Denver 281 GMT 07 00 Arizona 240 GMT 06 00 Central America Central Time Mexico City Saskatchewan 200 GMT 05 00 Eastern Time New York Toronto 201 GMT 05 00 Bogota Lima Quito Indiana 180 GMT 04 30 Caracas 160 GMT 04 00 Atlantic Time Canada La Paz Santiago 140 GMT 03 30 Newfoundland 120 GMT 03 00 Brasilia Buenos Aires Georgetown Greenland 80 GMT 02 00 Mid Atlantic 40 GMT 01 00 Azores Cape_Verde_IS 0 GMT Casablanca Greenwich Mean Time Dublin Edinburgh Lisbon London 40 GMT 01 00 Amsterdam Berlin Rome Stockholm Vienna Madrid Paris 41 GMT 01 00 Warsaw Budapest Bern 80 GMT 02 00 Athens Helsinki Istanbul Riga 81 GMT 02 00 Cairo 82 GMT 02 00 Lebanon Minsk 83 GMT 02 00 Israel 120 GMT 03 00 Baghdad Kuwait Riyadh Moscow St Petersburg Nairobi 121 GMT 03 00 Iraq 140 GMT 03 30 Tehran 160 GMT 04 00 Abu Dhabi Muscat Baku Tbilisi Yerevan 180 GMT 04 30 Kabul 200 GMT 05 00 Ekaterinburg Is
76. em Host name 12x zoom Speed Dome Network Camera Host name Enter a desired name for the Network Camera The text will be displayed at the top of the main page System 26 User s Manual System Time System Time Time zone GMT 08 00 Beijing Chongqing Hong Kong Kuala Lumpur Singapore Taipei w Note You can upload your Daylight Saving Time rules on Maintenance page or use the camera default value Keep current date and time Synchronize with computer time Manual Automatic Keep current date and time Select this option to preserve the current date and time of the Network Camera The Network Camera s internal real time clock maintains the date and time even when the power of the system is turned off Synchronize with computer time Select this option to synchronize the date and time of the Network Camera with the local computer The read only date and time of the PC is displayed as updated Manual The administrator can enter the date and time manually Note that the date and time format are yyyy mm dd and hh mm ss Automatic The Network Time Protocol is a protocol which synchronizes computer clocks by periodically querying an NTP Server NTP server Assign the IP address or domain name of the time server Leaving the text box blank connects the Network Camera to the default time servers Update interval Select to update the time using the NTP server on an hourly daily weekly
77. ent lighting conditions Then click Save to enable the new setting White Balance Auto Color temperature Select 5500K Daylight with Clear Sky 2600K Tungsten Bulb 3200K Sunrise Sunset 5500K Daylight with Clear Sky f200K Moderately Overcast Sky Q600K Heavily Overcast Sky Image Adjustment m Brightness Adjust the image brightness level which ranges from 5 to 5 m Saturation Adjust the image saturation level which ranges from 5 to 5 Contrast Adjust the image contrast level which ranges from 5 to 5 m Sharpness Adjust the image sharpness level which ranges from 3 to 3 You can click Preview to fine tune the image or click Restore to recall the original settings without incorporating the changes When completed with the settings on this page click Save to enable the setting and click Close to exit the page Privacy Mask Advanced Mode Click Privacy Mask to open the settings page On this page you can block out sensitive zones to address privacy concerns Please note that you can only set up or delete privacy mask at 1x zoom frame Image Settings Privacy Mask Sensor Settings ITEP AVI 2010 05 05 13 44 17 Fan speed 0 v Tilt speed o v zoom speed 5 v Go to select one Privacy Mask Enable privacy mask Color E Preset position name Privacy Mask i C Modi Add m lo set the privacy mask windows follow the steps below 1
78. equired The web browsing may fail if the CoS setting is incorrect P Class of Service technologies do not guarantee a level of service in terms of bandwidth and delivery time they offer a best effort Users can think of CoS as coarsely grained traffic control and QOS as finely grained traffic control P Though CoS is simple to manage it lacks scalability and does not offer end to end guarantees since it is based on L2 protocol QoS DSCP the DiffServ model DSCP ECN defines QoS at Layer 3 Network Layer The Differentiated Services DiffServ model is based on packet marking and router queuing disciplines The marking is done by adding a field to the IP header called the DSCP Differentiated Services Codepoint This is a 6 bit field that provides 64 different class IDs It gives an indication of how a given packet is to be forwarded known as the Per Hop Behavior PHB The PHB describes a particular service level in terms of bandwidth queueing theory and dropping discarding the packet decisions Routers at each network node classify packets according to their DSCP value and give them a particular forwarding treatment for example how much bandwidth to reserve for it Below are the setting options of DSCP DiffServ Codepoint Specify the DSCP value for each application O 63 Qo5 D3CP Enable QoS DSCP Live video 0 Live audio o Event Alarm o Management 0 HTTP Advanced Mode To utilize HTTP authenticatio
79. er second Set the frame rate higher for smoother video quality The frame rates are selectable at 1fps 2fps 3fps 5fps 8fps 10fps 15fps 20fps 25fps and 30fps You can also select Customize and manually enter a value The frame rate will decrease if you select a higher resolution m Intra frame period Determine how often to plant an I frame The shorter the duration the more likely you will get better video quality but at the cost of higher network bandwidth consumption Select the intra frame period from the following durations 1 4 second 1 2 second 1 second 2 seconds 3 seconds and 4 seconds m Video quality A complex scene generally produces a larger file size meaning that higher bandwidth will be needed for data transmission Therefore if Constant bit rate is selected the bandwidth utilization is fixed at a selected level resulting in mutable video quality performance The bit rates are selectable at the following rates 20Kbps 30Kbps 40Kbps 50Kbps 64Kbps 128Kbps 256Kbps 512Kbps 768Kbps 1Mbps 2Mbps 3Mbps and 4Mbps You can also select Customize and manually enter a value On the other hand if Fixed quality is selected all frames are transmitted with the same quality bandwidth utilization is therefore unpredictable The video quality can be adjusted to the following settings Medium Standard Good Detailed and Excellent You can also select Customize and manually enter a value If JPEG mode is selected the Ne
80. ername Password Confirm password 5 The Network Camera will reboot 6 Disconnect the power to the Network Camera remove it from the LAN environment VIVOTEK NOTE gt If the default ports are already used by other devices connected to the same router the Network Camera will select other ports for the Network Camera gt If UPnP is not supported by your router you will see the following message Error Router does not support UPnP port forwarding gt Steps to enable the UPnP user interface on your computer Note that you must log on to the computer as a system administrator to install the UPnP components 1 Go to Start click Control Panel then click Add or Remove Programs FRR EE jl Wa Gere ajara Yakdabor ood IPED 505 RP Wieke 1P el wc BD Wa othe CRE KA Waha Haa nba JI wrda eh cD Se ee LS ss 3 In the Windows Components Wizard dialog box select Networking Services and click Details eg kampangia Wira d Yeu can edd or remera comport ol erp FP T ceed Aa tad AA AP Cte A cbr bee Swai that ory fart of ie compared rll be niied o nee shai mck m a compra cic bi MB Cite Meri File ered Prd bereca noe l Tvn Aroa ern nai ludaei Dea ae Cae User s Manual 37 4 In the Networking Services dialog box select Universal Plug and Play and click OK Networking Services x To add or remove a component click the check bos A shaded box means that only p
81. es of trigger sources as shown below Select the item to display the detailed configuration options m Video motion detection This option makes use of the built in motion detection mechanism as a trigger source To enable this function you need to configure a Motion Detection Window first For more information please refer to Motion Detection on page 64 for details Trigger Video motion detection Mote Please configure Motion detection first Periodically Digital input System boot Recording notify m Periodically This option allows the Network Camera to trigger periodically for every other defined minute Up to 999 minutes are allowed Trigger Video motion detection Trigger every other 1 minutes Digital input System boot Recording notify m Digital input This option allows the Network Camera to use an external digital input device or sensor as a trigger source Depending on your application there are many choices of digital input devices on the market which helps to detect changes in temperature vibration sound and light etc Trigger Video motion detection Periodically Perret etry Digital input 1 Digital input2 Digital input3 Digital input 4 O System boot Recording notify m System boot This option triggers the Network Camera when the power to the Network Camera is disconnected m Recording notify This option allows the Network Camera to trigger whe
82. ess On the LAN http 192 168 4 160 or http 192 168 4 160 8080 Access name for stream 1 3 This Network camera supports multiple streams simultaneously The access name is used to differentiate the streaming source Users can click Configuration gt Audio and Video gt Video Settings to set up the video quality of linked streams For more information about how to set up the video quality please refer to Video quality settings on page 61 When using Mozilla Firefox or Netscape to access the Network Camera and the video mode is set to JPEG users will receive video comprised of continuous JPEG images This technology known as server push allows the Network Camera to feed live pictures to Mozilla Firefox and Netscape URL command http lt ip address gt lt http port gt lt access name for stream 1 3 gt For example when the Access name for stream 2 is set to video2 mjpg 1 Launch Mozilla Firefox or Netscape 2 Type the above URL command in the address bar Press Enter 3 The JPEG images will be displayed in your web browser 3 video mjpe JPEG Image 320x240 pixels Mozilla Firefox Sele vi ae File Edit Wiew History Bookmarks Tools Help aa C GB L http 192 168 5 lal a i E Co ft mzaa Fih ie Customize Links 5 Free Hotmail windows Media Windows he P NOTE gt Microsoft Internet Explorer does not support server push technology therefore using
83. etwork camera with minimal effort To simplify the setting procedure two types of user interfaces are available Advanced Mode for professional users and Basic Mode for entry level users Some advanced functions HTTPS SNMP Access list Camera control Homepage layout Application Recording Local storage System log View parameters are not displayed in Basic Mode If you want to set up advanced functions please click Advanced Mode on the bottom of the configuration list to guickly switch to Advanced Mode In order to simplify the user interface the detailed information will be hidden unless you click on the function item When you click on the first sub item the detailed information for the first sub item will be displayed when you click on the second sub item the detailed information for the second sub item will be displayed and that of the first sub item will be hidden The following is the interface of the Basic Mode and the Advanced Mode Basic Mode VIVOTEK WWW Ivo Trae com Configuration gt System Home System Host name 12x Zoom Speed Dome Network Camera Security system Time l Configuration List Network Keep current date and time DDNS Synchronize with computer time Manual Audio and video Automatic Motion detection es DI and DO Camera control Digital input The active state is a the current state detected is High Low the current state detected is High Maintenance Ad
84. exit the web browser video recording stops accordingly To specify the storage destination and file name please refer to MP4 Saving Options on page 24 for details Volume When the Mute function is not activated move the slider bar to adjust the volume on the ocal computer E DD Mute Turn off the volume on the local computer The button becomes the LS Audio On button after clicking the Mute button P Talk Click this button to talk to people around the Network Camera Audio will project from the external speaker connected to the Network Camera Click this button TA again to end talking transmission Mic Volume When the g Mute function is not activated move the slider bar to adjust the microphone volume on the local computer g Mute Turn off the a Mic volume on the local computer The button becomes the Fi Mic On button after clicking the Mute button E Full Screen Click this button to switch to full screen mode Press the Esc key to switch back to normal mode m The following window is displayed when the video mode is set to MJPEG Video Title Title and Time Video Control Buttons Video Title The video title can be configured For more information please refer to Video Settings on page 55 Time Display the current time For more information please refer to Video Settings on page 55 Title and Time Video title and time can be stamped on the streaming video For more information please refer to
85. f the Font Color of the Configuration Area f Video Area Background Color of the Powered by yiyareK Frame Color Configuration Area Preview VIVOTEK WwW Wai T a a S a Video Stream i vi Digital Output on ott Preview Y VIVOTEK WW a a D T a H G a m Video Stream Digital Output On OF Pi gt s Tz lt 18 or f i Client Settings Ce Fe EE Powered by VIVETEK m Follow the steps below to set up the customed homepage 1 Click Custom on the left column 2 Click the field where you want to change the color on the right column Theme Options Themes Color Font color oO Font color of configuration area FFFFFEF Font color of video title Bk color of control area BE color of configuration area Bk color of video area Custom Pattern Custom Frame color 3 The palette window will pop up as shown below Saturation D 0 0 0 o value 4 Drag the slider bar and click on the left sguare to select a desired color olor Selector Saturation 74 6 value 54 1 5 The selected color will be displayed in the corresponding fields and in the Preview column 6 Click Save to enable the settings Application This section explains how to configure the Network Camera to responds to particular situations event A typical application is that when a motion is detected the Network Camera sends buffered images to an FTP server or
86. g server videoclip snapshot source lt integer gt 6 6 Indicate the source of media stream O means the first stream 1 means the second stream and etc 2 means the third stream and etc 3 means the fourth stream and etc Snapshot_prefix string 16 me the prefix of the filename Snapshot_datesuffix 0 1 Add date and time suffix to filename Add date and time suffix Do not add snapshot_preevent 07 66 Indicates the number of pre event images snapshot_postevent o 7 les she number of post event images videoclip_ source lt integer gt 6 6 Indicate the source of media stream O means the first stream 1 means the second stream and etc 2 means the third stream and etc 3 means the fourth stream and etc videoclip_prefix string 16 6 6 ndicate the prefix of the filename videoclip_ preevent O 9 6 6 Indicates the time for pre event recording in seconds videoclip_maxduration peso fe Maximum duration of one video clip in seconds videoclip_maxsize 50 1500 Maximum size of one video clip file in Kbytes Group recording_1i lt 0O 1 gt PARAMETER VALUE SECURITY DESCRIPTION get set name string 40 6 6 dentification of this entry 6 Trigger type of this entry trigger schedule networkfail enable o1 lee Enable or disable this recording es priority 0 1 2 6 6 Indicate the priority of this recording 0 indicates low priority 1 indicates normal priority 2
87. gister column fill in the Host name xxxx safe100 net Email Key and Confirm Key and click Register After a host name has been successfully created a success message will be displayed in the DDNS Registration Result column Register Host name WTK Safe100 net Email wik vivotek com Key TEL Forget key Confirm key TET To apply for a domain name for the camera or to modify the previously registered information fill in the following fields and then click Register DDNS Registration Result Register Successfully Your account information has been mailed to registered e mail address Upon successful registration you can click copy ta automatically upload relevant information to the Kai DDNS form or you can manually fill itin Then click Save to Save new settings 3 Click Copy and all the registered information will automatically be uploaded to the corresponding fields in the DDNS column at the top of the page as seen in the picture DDNS Dynamic domain name service Enable DDNS Provider Host name VVTK safe100 net safe100 net Email wiki vivotek com Key ITA Register Host name VVTK safe100 net Email wik vivotek com Key one Forget key Confirm key TET To apply for a domain name for the camera or to modify the previously registered information fill in the following fields and then click Register UDNS Registration Result Register Successfully Your account
88. gs Recording Settings Note Before setup recording you have to setup network storage first via Server page Name Status Sun Mon Tue Wed Thu Fri Sat Time Source Destination Insert your SD card and click here to test NOTE gt Before setting up this page please set up the Network Storage on the Server Settings page first P Please remember to format your SD card when using for the first time Please refer to page 90 for detailed information Network Storage Setting Click Server to open the Server Settings page and follow the steps below to set up 1 Fill in the information for your server Forexample PRESS tnt e Server name Server Type Email oe Network storage path HTTP server name or IP address folder name 1 Network storage Network storage location WW192 166 5 122nas For example timy_nasidiskifoldert Workgroup vivotek ser name Password save 2 4 User name and password for your server 2 Done AD Internet 2 Click Test to check the setting The result will be shown in the pop up window F hitp 192 168 5 151 cgi bin admin testserver A O K Il a http 192 168 5 151 cgi bin adminitestserver Mount successfully Thanks Mount failed Done Internet Internet If successful you will receive a test txt file on the network storage server NAS on ritali Q tek Nee wa pp Search Folders Eny Address E Vritalitas v Go test txt Text Document
89. hoosing cyclic recording mechanism dest cf 6 6 The destination to store the recorded data 0 4 cf means CF card O 4 means the index of the network storage cffolder string 128 6 6 Folder name Group https product dependent NAME VALUE SECURITY DESCRIPTION get set enable lt boolean gt To enable or disable secure HTTP policy lt Boolean gt If the value is 1 it will force HTTP connection redirect to HTTPS connection method auto 6 6 auto gt Create self signed certificate manual automatically install manual gt Create self signed certificate manually install gt Create certificate request and install status Specify the https status 3 Certificate not installed 2 Invalid public key 1 Waiting for certificate 0 Not installed 1 Active string 2 Country name in the certificate information stateorprovincename string 128 6 6 State or province name in the certificate information localityname string 128 The locality name in the certificate information organizationname string 64 6 6 Organization name in the certificate information unit string 32 6 6 Organizational unit name in the certificate information string 64 Common name in the certificate information 6 validdays 0 9999 6 6 Valid period for the certification Group disk_i lt O n 1 gt n is the total number of storage devices PARAMETER VALUE SECURITY DESCRIPTION get set cyclic_en
90. i method lt value gt amp name lt value gt amp maskheight lt val ue gt amp maskwidth lt value gt amp return lt return page gt PARAMETER VALUE DESCRIPTION method ada Jada a 3D privacy mask at current location delete Delete a 3D privacy mask maskname string 40 3D privacy mask name VIVOTEK maskheight integer fap privacy mask height maskwidth integer Jb privacy mask width return lt return page gt Redirect to page lt return page gt after the 3D privacy mask is configured The lt return page gt can be a full URL path or relative path according to the current path If you omit this parameter it will redirect to an empty page Query Status of the Digital Input Note This request requires Viewer privileges Method GET POST Syntax http lt servername gt cgi bin dido getdi cgi di0 amp dil amp di2 amp di3 If no parameter is specified all of the digital input statuses will be returned Return HTTP 1 0 200 OK r n Content Type text plain r n Content Length lt ength gt r n r n di0 lt state gt r n di1 lt state gt r n di2 lt state gt r n di3 lt state gt r n where lt state gt can be 0 or 1 Example Query the status of digital input 1 e eea Mvesivek 6G ell Lee Gerdinc jn 2 136 User s Manual VIVOTEK Ouery Status of the Digital Output Note This request requires Viewer privileges Method GET POST Syntax http
91. icient especially for real time streaming multimedia applications Quality can be defined as for instance a maintained level of bit rate low latency no packet dropping etc The following are the main benefits of a QoS aware network m The ability to prioritize traffic and guarantee a certain level of performance to the data flow m The ability to control the amount of bandwidth each application may use and thus provide higher reliability and stability on the network Requirements for QoS To utilize QoS in a network environment the following requirements must be met m All network switches and routers in the network must include support for QoS m The network video devices used in the network must be QoS enabled QoS models CoS the VLAN 802 1p model IEEE802 1p defines a QoS model at OSI Layer 2 Data Link Layer which is called CoS Class of Service It adds a 3 bit value to the VLAN MAC header which indicates the frame priority level from 0 lowest to 7 highest The priority is set up on the network switches which then use different queuing disciplines to forward the packets Below is the setting column for CoS Enter the VLAN ID of your switch 0 4095 and choose the priority for each application 0 7 CoS Enable CoS VLAN ID 1 Live video of Live audio os EventAlarm oe Management of lf you assign Video the highest level the switch will handle video packets first NOTE gt The VLAN Switch 802 1p is r
92. ick to set the start and end time of DST Follow the steps below to export 1 In the Export files column click Export to export the daylight saving time configuration file from the Network Camera 2 A file download dialog will pop up as shown below Click Open to review the XML file or click Save to store the file for editing File Download Do you want to open or save this file G Name config dst xml Type XML Document 11 1 KB From 9 192 168 5 151 harm your computer If you do not trust the source do not open or G While files from the Internet can be useful some files can potentially save this file What s the risk 3 Open the file with Microsoft Notepad and locate your time zone set the start and end time of DST When completed save the file In the example below DST begins each year at 2 00 a m on the second Sunday in March and ends at 2 00 a m on the first Sunday in November config dst Notepad Fie E Fomet Yee jep i aly cf DAY F week nion hf irsta week Iron he Da yor week Sundays bayor Week ja waa Ta a HDL 3 Eni i KI mezani Timezone ide 240 mames MT 00 00 Central Time cus and Canadal gt cotartT ime eshit gt 60 lt shift gt dionth 3 lt a he Dea yD Aa hs Seconds week iregont he lt Dayotweek sundays Dayot week gt HOU 2 Ue cf StartT ime cE aa imi ashi ft gt 60 lt shift gt choot hie Mort he chayo ay Days etch inant hir irsta neek AAA lt Dayot we
93. ideo motion detection uw seq Periodic condition recnotify Recording notification The status for event trigger Indicate which DI detects This field is required when trigger condition is di One bit represents one digital input The LSB indicates DI 0 Indicate which motion detection windows detect This field is required when trigger condition is md One bit represents one window The LSB indicates the 1 window For example to detect the 1 and 3 windows set mdwin as 5 Similar to mdwin The parameter takes effect when profile 1 of motion detection is enabled Interval of snapshots in minutes This field is used when trigger condition is seq weekday O 127 6 6 Indicate which weekday is scheduled One bit represents one weekday bitO LSB Saturday biti Friday bit2 Thursday bit3 Wednesday bit4 Tuesday bits Monday bite Sunday For example to detect events on Friday and Sunday set weekday as 66 endtime hh mm 6 6 End time of the weekly schedule peee fmm ee 24 00 sets schedule as always on action_do_i lt O ndo 1 0 1 6 6 Enable or disable trigger digital output action_do_i lt O ndo 1 1 999 6 6 Duration of the digital output trigger in seconds action cf enable Enable media write on CF action cf folder string 128 6 6 Path to store media action cf media NULL 0 4 lt C of the attached media action_cf_datefolder lt boolean gt Enabl
94. ifthe cameraidiesfor 50 1 999 seconds Je Patrol Settings You can select preset locations for the Network Camera to patrol Please follow the steps below to set up a patrol route 1 Select preset locations from the list and click gt 2 The selected preset locations will be displayed on the Patrol Locations list 3 Set the Dwelling time for the preset location during auto patrol 4 Repeat step 1 and 3 to select additional preset locations 5 If you want to delete a selected location select it from the list and click BI 6 Select a location and click a to rearrange the patrol order 7 Adjust the Auto pan patrol speed 1 5 seconds 8 Click Save to enable the settings TOP 2010 06 17 13 44 17 Pan speed oi Tilt speed o w Zoom speed o ml Focus speed Home Location Setting Set Current Position as Home Restore Home Position to Default Preset and Patrol Settings Name Add Preset Location Select Preset Locations for Patrol User Preset Locations Patrol Loctaions Dwell Time H Up A 2 Right FE Down il Lef OO Right Up right Lin in au A E a Te T Misc Settings Enable Digital Zoom F Start to pan we ifthe camera idles for 50 1 999 seconds O Misc Settings Misc Settings Enable Digital Zoom Start to pan Start to pan Start to patrol ha ifthe camera idles for 50 1 999 seconds Return to home position Enable Digital Zoom If y
95. information has been mailed to registered e mail address NA Upon successful registration you can click copy to automatically upload relevant information to the QONE form or you can manually fill itin Then click Save to save new settings 4 Select Enable DDNS and click Save to enable the setting m CustomSafe100 VIVOTEK offers documents to establish a CustomSafe100 DDNS server for distributors and system integrators You can use CustomSafe100 to register a dynamic domain name if your distributor or system integrators offer such services 1 In the DDNS column select CustomSafe100 from the drop down list 2 In the Register column fill in the Host name Email Key and Confirm Key then click Register After a host name has been successfully created you will see a success message in the DDNS Registration Result column 3 Click Copy and all for the registered information will be uploaded to the corresponding fields in the DDNS column 4 Select Enable DDNS and click Save to enable the setting Forget key Click this button if you have forgotten the key to Safe100 net or CustomSafe100 Your account information will be sent to your email address Refer to the following links to apply for a dynamic domain account when selecting other DDNS providers m Dyndns org Dynamic Dyndns org Custom visit http www dyndns com m ZO com visit http www tzo com m DHS org visit http www dhs org m dyn interfree it visit h
96. ital Output TEP LA aS La Zoom h d Security Alert badot i i You are about to view pages over a secure connection ean See Leal 4 a ae p i it k i Any information you exchange with this site cannot be Pan speed oOo i HOTT gt viewed by anyone else on the Web Tilt speed o j4 wl pe M a C In the future do not show this warning Focus speed 0 v ka ST aei T ee A oO Security Alert This page contains both secure and nonsecure KD Information you exchange with this site cannot be viewed or i Items changed by others However there is a problem with the site s security certificate Do you want to display the nongecure tema lt a The security certificate was issued by a company you have Hot chosen to trust View the certificate to determine whether wou Wan to trust the certifying authority The security certificate date is valid The name on the security certificate is invalid or does not match the name of the site Do you want to proceed VIVOTEK Create self signed certificate manually 1 Select this option 2 Click Create to open the Create Certificate page then click Save to generate the certificate Create and install certificate method Create self signed certificate automatically Create self signed certificate manually Selt signed certificate Create certificate request and install Create Certificate 3 The Certificate
97. ith ease m The SNMP consists of the following three key components 1 Manager Network management station NMS a server which executes applications that monitor and control managed devices 2 Agent A network management software module on a managed device which transfers the status of managed devices to the NMS 3 Managed device A network node on a managed network For example routers switches bridges hubs computer hosts printers IP telephones network cameras web server and database Before configuring SNMP settings on the this page please enable your NMS first SNMP Configuration Enable SNMPv1 SNMPv2c Select this option and enter the names of Read Write community and Read Only community according to your NMS settings Enable SNMPv1 SNMPv2c SNMPv1 SNMPv2c Settings Read Write community Private Read only community Public Enable SNMPv3 This option contains cryptographic security a higher security level which allows you to set the Authentication password and the Encryption password m Security name According to your NMS settings choose Read Write or Read Only and enter the community name m Authentication type Select MD5 or SHA as the authentication method m Authentication password Enter the password for authentication at least 8 characters m Encryption password Enter a password for encryption at least 8 characters Enable SNMPv3 SNMPv3 Settings Read Write Security name Private Authentica
98. ituations Shutter Priority Manual Back light compensation OON OFF Day Night IR cutite Automode sensor Setting 2 For special situations Exposure User can choose Auto or manually set Shutter Priority and BLC Auto Select the sensitivity of IR cut filter Low Medium or High The Network Camera automatically adjusts the iris and gain in response to different environments Depending on ambient lighting conditions select either to enable WDR or the back light compensation Shutter Priority Select a proper maximum exposure time according to the light source of the surroundings The exposure times are selectable for the following durations 1 10000 fastest 1 60 second slowest Shorter exposure times result in less light Back Light Compensation Select ON when the object is too dark or too bright to recognize It allows the camera to adjust to the best light conditions in any environment and automatically give the necessary light compensation Manual Shutter 4600 ow Iris F44 Gain 0dB Manual Manually set up Shutter Iris and Gain number m Shutter Adjust the shutter speed from 1 2 second slowest to 1 10000 second fastest m Gain You can manually set the Max gain 0 dB 28 dB Day Night Settings IR cut filter With a removable IR cut filter this Network Camera can automatically remove the filter to let IR light into the sensor during low light conditions m Day mode In day mo
99. k Camera and are judged to exceed the defined threshold the red bar rises Meanwhile the motion detection window will be outlined in red Photos or videos can be captured instantly and configured to be sent to a remote server Email FTP by utilizing this feature as a trigger source For more information on how to set an event please refer to Application on page 73 A green bar indicates that even though motions have been detected the event has not been triggered because the image variations still fall under the defined threshold Percentage 30 If you want to configure other motion detection settings for day night schedule mode please click Profile to open the Motion Detection Profile Settings page as shown below A total of three motion detection windows can be configured on this page as well 2010 05 06 13 44 17 a E Window Name S sensitivity LS em Percentage General Settings C Enable this profile This profile is applied to Day mode Night mode Schedule mode Save Close Please follow the steps below to set up a profile 1 Create a new motion detection window 2 Check Enable this profile 3 Select the applicable mode Day mode Night mode or Schedule mode Please manually enter a time range if you choose Schedule mode 4 Click Save to enable the settings and click Close to exit the page This motion detection window will also be displayed on
100. k Camera to open a secondary HTTP port on the router not HTTP port meaning that you have to add the secondary HTTP port number to the Network Camera s public address in order to access the Network Camera from the Internet For example when the HTTP port is set to 80 and the secondary HTTP port is set to 8080 refer to the list below for the Network Camera s IP address From the Internet In LAN http 203 67 124 123 8080 http 192 168 4 160 or http 192 168 4 160 8080 gt Ifthe PPPoE settings are incorrectly configured or the Internet access is not working restore the Network Camera to factory default please refer to Restore on page 96 for details After the Network Camera is reset to factory default it will be accessible on the LAN Enable IPv6 Select this option and click Save to enable IPv6 settings Please note that this only works if your network environment and hardware equipment support IPv6 The browser should be Microsoft Internet Explorer 6 5 Mozilla Firefox 3 0 or above Network Type LAN Get IP address automatically Use fixed IP address Enable UPnP presentation Enable UPnP port forwarding PPPoE Enable IPv6 IPv6 Information C Manually setup the IP address When IPv6 is enabled by default the network camera will listen to router advertisements and be assigned with a link local IPv6 address accordingly IPv6 Information Click this button to obtain the IPv6 information as shown below IPv6
101. l redirect to an empty page Preset Locations capability ptzenabled Note This request requires Operator privileges Method GET POST Syntax http lt servername gt cgi bin operator preset cgi channel lt value gt amp addpos lt value gt amp delpos lt value gt amp return lt return page gt PARAMETER VALUE DESCRIPTION lt Text string less than Add one preset location to the preset list 30 characters gt channel lt 0 n 4 gt Channel of the video source lt Text string less than Delete preset location from preset list 30 characters gt lt return page gt Redirect to the page lt return page gt after the parameter is assigned The lt return page gt can be a full URL path or relative path according to the current path If you omit this parameter it will redirect to an empty page System Information Note This request requires Normal User privileges obsolete Method GET POST Syntax http lt servername gt cai bin sysinfo cai Server will return the system information In HTTP API version 2 the CapVersion will be 0200 All fields in the previous version 0100 are obsolete Please use getparam cgi capability instead Return HTTP 1 0 200 OK r n Content Type text plain r n Content Length lt system information length gt r n r n Model lt model name of server gt r n CapVersion 0200 r n PARAMETER supported VALUE DESCRIPTION
102. lamabad Karachi Tashkent 220 GMT 05 30 Calcutta Chennai Mumbai New Delhi 230 GMT 05 45 Kathmandu 240 GMT 06 00 Almaty Novosibirsk Astana Dhaka Sri Jayawardenepura 260 GMT 06 30 Rangoon 280 GMT 07 00 Bangkok Hanoi Jakarta Krasnoyarsk 320 GMT 08 00 Beijing Chongging Hong Kong Kuala Lumpur Singapore Taipei 360 GMT 09 00 Osaka Sapporo Tokyo Seoul Yakutsk 380 GMT 09 30 Adelaide Darwin 400 GMT 10 00 Brisbane Canberra Melbourne Sydney Guam Vladivostok 440 GMT 11 00 Magadan Solomon Is New Caledonia 480 GMT 12 00 Aucklan Wellington Fiji Kamchatka Marshall Is 520 GMT 13 00 Nuku Alofa daylight enable lt boolean gt 6 6 Enable automatic daylight saving time in time zone daylight dstactual lt boolean gt 6 7 Check if current time is under daylight saving mode time Used internally daylight_auto_beg string 19 6 7 Display the current daylight saving start time intime sera product dependent daylight_auto_end string 19 6 7 Display the current daylight saving end time time sera product dependent daylight_timezone string 6 6 List time zone index which support daylight S see saving time 0 updateinterval 0 to Disable automatic time adjustment 3600 otherwise it indicates the seconds between 86400 NTP automatic update intervals 604800 2592000 restore 0 Restore the system parameters to default lt positive integer gt values after lt value gt seconds
103. log NAME VALUE SECURITY DESCRIPTION get set enableremotelog 6 6 Enable remote log lt IP address gt 6 6 Log server IP address 514 1025 65535 6 6 Server port used for log level O 7 6 6 Levels used to distinguish the importance of the information 0 LOG_EMERG LOG_ALERT LOG_CRIT LOG_ERR LOG_WARNING LOG_NOTICE LOG_INFO LOG_DEBUG Group camctrl_c lt O n 1 gt for n channel product capability ptzenabled NAME VALUE SECURITY DESCRIPTION get set preset_i lt O npreset string 40 1 4 Name of the preset location 1 gt _name preset_i lt O 127 gt _ 0 255 1 4 Dwelling time at each preset location dwelling patrol_i lt 0 39 gt _nam string 40 1 4 For internal device e The name of patrol location patrol_i lt 0 39 gt _ 0 255 1 4 For internal device dwelling The dwelling time of each patrol location disablemdonptz lt boolean gt 1 4 Disable motion detection on PTZ operation defaulthome lt boolean gt 6 6 This field tells system to use default home position or not digitalzoom lt boolean gt 6 6 Enable disable digital zoom idleaction enable lt integer gt 1 4 Enable disable idle action while idle idleaction type pan patrol 1 4 This field tells what kind of action should be taken U1 l UI idleaction_interval lt integer gt 1 4 While idle over this time interval idle action will be taken horizontalalignment lt boolean gt 1 4 Once you enable this fea
104. lt 0 2 gt width 0 320 4 4 lt O m 1 gt _wini lt O 2 gt height 0m 240 4 4 lt O m 1 gt _win I lt 0 2 gt _objsize o 100 4 4 i lt O m 1 gt _win_i lt O 2 gt _sensitivity 0 100 4 4 Group ddns NAME VALUE SECURITY DESCRIPTION get set provider Safe100 6 6 Safe100 gt safe100 net DyndnsDynamic DyndnsDynamic gt dyndns org dynamic DyndnsCustom DyndnsCustom gt dyndns org custom TZO TZO gt tzo com DHS DHS gt dhs org DynInterfree DynInterfree gt dyn interfree it CustomSafe100 PeanutHull gt PeanutHull CustomSafe100 gt Custom server using safe100 method 6 6 lt provider gt _hostna string 128 Your dynamic hostname me lt provider gt _userna string 64 meemail lt provider gt _passwo string 64 rdkey lt provider gt _servern string 128 Your user or email to login to the DDNS service provider Your password or key to login to the DDNS service provider The server name for safe100 ame This field only exists if the provider is customsafe100 Group upnppresentation NAME VALUE SECURITY DESCRIPTION get set Enable or disable the UPNP presentation service Group upnpportforwarding NAME VALUE SECURITY DESCRIPTION get set Enable or disable the UPNP port forwarding service upnpnatstatus 0 3 6 7 The status of UpnP port forwarding used internally 0 OK 1 FAIL 2 no IGD router 3 no need for port forwarding Group sys
105. lt servername gt cgi bin dido getdo cgi do0 amp dol amp do2 amp do3 If no parameter is specified all the digital output statuses will be returned Return HTTP 1 0 200 OK r n Content Type text plain r n Content Length lt ength gt r n r n do0O lt state gt r n do1 lt state gt r n do2 lt state gt r n do3 lt state gt r n where lt state gt can be Oor 1 Example Query the status of digital output 1 http myserver cgi bin dido getdo cgi dol Capture Single Snapshot Note This request requires Normal User privileges Method GET POST Syntax User s Manual 137 http lt servername gt cgi bin viewer video jpg channel lt value gt amp resolution lt value gt amp quality lt value gt amp streamid lt value gt If the user requests a size larger than all stream settings on the server this request will fail came Joron o rne channel number of tne vide source fessuion zavaranie masoko re resolution ofthe mage O m 1 lt product dependent gt The stream number The server will return the most up to date snapshot of the selected channel and stream in JPEG format The size and quality of the image will be set according to the video settings on the server Return HTTP 1 0 200 OK r n Content Type image jpeg r n Content Length lt image size gt r n lt binary JPEG image data gt Account Management Note This request requires
106. lt value gt Move the center of image to the coordination x y based on resolution or videosize amp speedpan lt value gt amp speedtilt lt value gt amp speedzoom lt value gt amp speedapp lt value gt amp speedlink lt value gt amp return lt return page gt Example http myserver cai bin viewer camctrl cgi channel O amp camid 1 amp move right http myserver cai bin viewer camctrl cgi channel O amp camid 1 amp zoom tele http myserver cai bin viewer camctrl cgi channel O amp camid 1 amp x 300 amp y 200 amp resolution 704x480 amp vi deosize 704x480 amp strech 1 PARAMETER VALUE DESCRIPTION channel lt 0m n 1 gt Channel of video source move home Move to camera to home position down Move camera down left Move camera left speedpan 5 5 Set the pan speed speedtilt 545 Set the tilt speed Speedfocus 5 5 Set the focus speed speedapp 545 Set the auto pan patrol speed auto zoom wide Zoom larger view with current speed tele Zoom further with current speed zooming wide or tele Zoom without stopping for larger view or further view with zs speed used for joystick control Set the speed of zooming 0 means stop ZS vx kinteger excluding 0 gt The slope of movement vy vx used for joystick control Set the speed of movement 0 means stop x lt integer gt x coordinate clicked by user It will be the x coordinate
107. monitoring thus effectively save lots of bandwidths and storage When there is no alarm trigger JEPE mode record 1 frame per second H 264 mode record frame only Pe L Poe TIT Pal MPEG mode record frame only Bu ma E I frame gt Fullframe rate gt frame Bandwidth When the frame period is gt 1s on Video settings page it should force to make the frame period to Activity Adaptive Streaming 1s when adaptive recording is activated for Dynamic Frame Rate Control Continuous recording Time The alarm trigger includes motion detection and DI detection Please refer to Event Settings on page 74 m Pre event recording and post event recording The Network Camera has a buffer area it temporarily holds data up to a certain limit Enter a number to decide the duration of recording before and after a trigger is activated NOTE P To enable adaptive recording please also enable time shift caching stream and select a caching stream on Audio and Video page Please refer to page 55 for detailed instruction Priority Norm al w Source Stream 1 bdl Trigger Schedule Network fail Recording Schedule Sun Mon Tue Wed Thu Fri Sat Time Always From to hh mm Destination NAS So Capacity Entire free space Reserved Space 100 Mbytes File name prefix 1 Enable cyclic recording Mote To enable recording notification please configure Application first Pri
108. n make sure that your have set a password for the Network Camera first please refer to Security on page 28 for details HTTP Authentication basic HTTP port 60 secondary HTTP port 3080 Access name for stream 1 video mjpa Access name for stream 2 video mjpg Access name for stream 3 videos mjpg Authentication Depending on your network security requirements the Network Camera provides two types of security settings for an HTTP transaction basic and digest If basic authentication is selected the password is sent in plain text format and there can be potential risks of being intercepted If digest authentication is selected user credentials are encrypted using MD5 algorithm and thus provide better protection against unauthorized accesses HTTP port Secondary HTTP port By default the HTTP port is set to 80 and the secondary HTTP port is set to 8080 They can also be assigned to another port number between 1025 and 65535 If the ports are incorrectly assigned the following warning messages will be displayed Microsoft Internet Explorer AI Microsoft Internet Explorer Ad HTTP port must be 80 or from 1025 to 65535 A Secondary HTTP port must be from 1025 to 65535 To access the Network Camera on the LAN both the HTTP port and secondary HTTP port can be used to access the Network Camera For example when the HTTP port is set to 80 and the secondary HTTP port is set to 8080 refer to the list below for the Network Camera s IP addr
109. n the recording disk is full or when recording starts to rewrite older data Event Schedule Specify the period for the event Event Schedule Sun Mon Tue Wed Thu Fri Sat Time Always From to hh mm m Select the days of the week m Select the recording schedule in 24 hr time format Action Define the actions to be performed by the Network Camera when a trigger is activated Action C Trigger digital output for 1 seconds Move to preset location up Note Please configure Preset locations first Add Server Add Media Server Media Extra parameter oso None m Trigger digital output for L seconds Select this option to turn on the external digital output device when a trigger is activated Specify the length of the trigger interval in the text box m Move to preset location Select this option the Network Camera will move to the preset location when a trigger is activated Please setup the preset locations first Please refer to Preset Locations on page 67 for detailed information VIVOTEK To set an event with recorded video or snapshots it is necessary to configure the server and media settings so that the Network Camera will know what action to take such as which server to send the media files to when a trigger is activated m Add Server Add Media Click Add Server to configure Server Settings For more information please refer to Server Settings on page 79 Click Add Media to
110. nd data format documents Senddata capability nuart gt 0 Note This request requires Viewer privileges Method GET POST Syntax http lt servername gt cgi bin viewer senddata cgi com lt value gt amp data lt value gt amp flush lt value gt amp wait lt value gt amp read lt value gt PARAMETER VALUE DESCRIPTION com it lt max com port number gt The target COM RS485 port number data lt hex decimal data gt lt hex The lt hex decimal data gt is a series of digits from 0 9 A F decimal data gt Each comma separates the commands by 200 milliseconds flush lyes no yes Receive data buffer of the COM port will be cleared before read no Do not clear the receive data buffer wait i 65535 Wait time in milliseconds before read data read 1 128 The data length in bytes to read The read data will be in the return page Return HTTP 1 0 200 OK r n Content Type text plain r n Content Length lt system information length gt YAN r n lt hex decimal data gt r n Where hexadecimal data is digits from 0 9 A F Storage managements capability storage dbenabled 1 Note This request requires administrator privileges Method GET and POST Syntax http lt servername gt cgi bin admin Isctrl cgi cmd lt cmd_type gt amp lt parameter gt lt value gt The commands usage and their input arguments are as follows PARAMETER VAL
111. nistrator can always connect to the device Administrator IF address Always allow the IP address to access this device 0000 54 User s Manual Audio and Video This section explains how to configure the audio and video settings of the Network Camera It is composed of the following two columns Video Settings and Audio Settings Video Settings Video Settings Video title Color select caching stream Video orientation Flip 7 Mirror Overlay title and time stamp on video and snapshot _ Enable time shift caching stream Image Settings Privacy Mask sensor Settings Video title Enter a name that will be displayed on the title bar of the live video Video Title video 2010 05 04 13 44 17 Title and Time FTC EM t AIPA Color Select to display color or black white video streams Select caching stream This Network Camera supports time shift cache stream on the Network Camera Select one stream and check the below option Enable time shift caching stream Enable time shift caching stream Advanced Mode Check this item to enable the time shift cache stream on the Network Camera which will stores video in the camera s embedded memory for a period of time depending on the cache memory of each Network Camera This function can work seamlessly with VIVOTEK s recording software When an event occurs the recording software can request time shift cache stream from the camera which allows the user to get an
112. ode to H 264 MPEG 4 and use the following RTSP URL command to request transmission of the streaming data rtsp lt ip address gt lt rtsp port gt lt access name for stream 1 3 gt For example when the access name for stream 1 is set to live sdp 1 Launch an RTSP player 2 Choose File gt Open URL A URL dialog box will pop up 3 Type the above URL command in the text box 4 The live video will be displayed in your player as shown below wa PEF PE DE A Fe Video 16 38 01 2010 05 03 a Erme orn ninpa LIAL io opan rtsp 192 168 5 151 554 RTSP port RTP port for video audio RTCP port for video audio m RTSP Real Time Streaming Protocol controls the delivery of streaming media By default the port number is set to 554 m The RTP Real time Transport Protocol is used to deliver video and audio data to the clients By default the RTP port for video is set to 5556 and the RTP port for audio is set to 5558 m The RTCP Real time Transport Control Protocol allows the Network Camera to transmit the data by monitoring the Internet traffic volume By default the RTCP port for video is set to 5557 and the RTCP port for audio is set to 5559 The ports can be changed to values between 1025 and 65535 The RTP port must be an even number and the RTCP port is the RTP port number plus one and thus is always an odd number When the RTP port changes the RTCP port will change accordingly If the RTP p
113. of network qos NAME VALUE SECURITY DESCRIPTION get set cos_video O 7 6 6 Video channel for CoS Subgroup of network ipv6 NAME VALUE SECURITY DESCRIPTION get set addonrouter IPv6 router address addondns IPv6 DNS address allowoptional 6 6 Allow manually setup of IP address setting Subgroup of network ftp VALUE SECURITY DESCRIPTION get set 21 1025 65535 Local ftp server port Subgroup of network http SECURITY DESCRIPTION get set 80 1025 65535 HTTP port alternateport 1025 65535 6 6 Alternate HTTP port authmode basic HTTP authentication mode digest SsOQ_accessname string 32 HTTP server push access name for stream 1 capability protocol spush_mjpeg 1 and video stream count gt 0 S1_accessname string 32 HTTP server push access name for stream 2 capability protocol spush_mjpeg 1 and video stream count gt 1 S2_accessname string 32 Http server push access name for stream 3 capability protocol spush_mjpeg 1 and video stream count gt 2 S3_accessname string 32 Http server push access name for stream 4 capability protocol spush_mjpeg 1 and video stream count gt 3 S4_accessname string 32 Http server push access name for stream 5 capability protocol spush_mjpeg 1 and video stream count gt 4 Subgroup of network https NAME VALUE SECURITY DESCRIPTION set 443 1025 65535 6 6 HTTPS port Subgroup of network rtsp NAME VAL
114. om Focus operation via the control panel and how to preset locations Preset Locations On this page you can preset positions for the Network Camera to go to directly or patrol A total of 128 preset positions can be configured Please follow the steps below to preset a position 1 Adjust the shooting area to a desired position using the buttons on the right side of the window 2 Click Set Current Position as home or Restore Home Position to Default to define your home position 3 Enter a name for the preset location which allows for up to 40 characters Click Add to enable the settings The preset locations will be displayed under the Preset Location list on the left hand side 4 To add additional preset positions please repeat step 1 3 5 To remove a preset position from the list select it from the list and click x Click n Or to unfold or fold the list 6 Click Save to enable the settings 2010 05 06 13 44 17 Pan speed o v Q Tilt speed 0 w P Functions are the o W same as the Control Focus speed fo v Panel on the home 1 m Auto pan patrol speed page Go to Selectone one v Zoom speed Home Location Setting Set Current Position as Home i Restore Home Position to Default Select Preset Locations for Patrol User Preset Locations Patrol Loctaions Dwell Time Up Down Right Left Lip right Lin laft Misc Settings Enable Digital Zoom c Start to pan w
115. ording it will send the recorded files to the Network Storage The new recording name will appear on the drop down list on the recording page as shown below To remove a recording setting from the list select a recording name from the drop down list and click Delete Recording Settings Mote Before setup recording you have to setup network storage first via Server page Name Status Sun Mon Tue Wed Thu Fri Sat Time Source Destination Video ON Y Y Y Y Y Y Y O0 00 24 00 streami NAS m Click Video Name Opens the Recording Settings page to modify m Click ON Status The Status will become OFF and stop recording m Click NAS Destination Opens the file list of recordings as shown below For more information about folder naming rules please refer to page 85 for details 20100605 20100606 C 20100607 Delete al VIVOTEK Local Storage This section explains how to manage the local storage on the Network Camera Here you can view SD card status search for recorded files to playback download etc SD card management gt SD card status Detached no SD card SD card control Searching and viewing the records File attributes Trigger time Search results show 10_ ties search Showing 0 to 0 of 0 entries alti bem j ja See i L UL E d i gmi I i L JI THT k g ki II fa SD Card Management SD card status This column shows th
116. ority Select the relative importance of this recording setting High Normal and Low Source Select the recording source stream 1 3 Trigger Select a trigger source m Schedule The server will start to record files on the local storage or network storage NAS m Network fail Since network fail the server will start to record files on the local storage SD card Recording Schedule Specify the recording duration m Select the days of the week m Select the recording start and end times in 24 hr time format Destination You can select the SD card or network storage that was set up for the recorded video files Capacity You can choose either the entire free space available or limit the reserved space The recording size limit must be larger than the reserved amount for cyclic recording File name prefix Enter the text that will be appended to the front of the file name Enable cyclic recording If you check this item when the maximum capacity is reached the oldest file will be overwritten by the latest one The reserved amount is reserved for cyclic recording to prevent malfunction This value must be larger than 15 MBytes If you want to enable recording notification please click Application to set up Please refer to Trigger gt Recording notify on page 76 for detailed information When completed select Enable this recording Click Save to enable the setting and click Close to exit this page When the system begins rec
117. orts are incorrectly assigned the following warning message will be displayed Micreaalt Intarnel Explorar fx A Biel pot fede aes ee fd ee a vee ee L Bi J Multicast settings for stream 1 3 Click the items to display the detailed configuration information Select the Always multicast option to enable multicast for stream 1 3 Multicast settings for stream 1 C Aways multicast Multicast group address 234 128 1 99 Multicast video port 5560 Multicast RTCP video port Multicast audio port 5562 Multicast RTCP audio port Multicast TTL 1 255 15 Multicast settings for stream 2 C Aways multicast Multicast group address 239 128 1 100 Multicast video port 5564 Multicast RTCP video port Multicast audio port 5566 Multicast RTCP audio port Multicast TTL 1 255 15 Unicast video transmission delivers a stream through point to point transmission multicast on the other hand sends a stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address Therefore enabling multicast can effectively save Internet bandwidth The ports can be changed to values between 1025 and 65535 The multicast RTP port must be an even number and the multicast RTCP port number is the multicast RTP port number plus one and thus is always odd When the multicast RTP port changes the multicast RTCP port will change accordingl
118. oth text boxes then click Save to enable password protection 2 A window will be prompted for authentication type the correct user s name and password in their respective fields to access the Network Camera Manage Privilege Advanced Mode Mare ge Prielle TES u a a Digital Quiput amp IF illuminators HO a Ch AE PTZ contral Hie AOE ving Sima Digital Output PTZ control You can modify the manage privilege of operators or viewers Check or uncheck the item then click Save to enable the settings If you give Viewers the privilege Operators will also have the ability to control the Network Camera through the main page Please refer to Main Page on page 19 Allow anonymous viewing If you check this item any client can access the live stream without entering a User ID and Password Manage User Manage User Existing username Addnewuser Username User password Confirm user password Add Privilege Administrator v Administrator Operator Viewer Administrators can add up to 20 user accounts 1 Input the new user s name and password 2 Select the privilege level for the new user account Click Add to enable the setting Access rights are sorted by user privilege Administrator Operator and Viewer Only administrators can access the Configuration page Though operators cannot access the Configuration page they can use the URL Commands to get and set the value of parame
119. ou check this option and click the Save button the digital zoom function of CCD module will be enabled Start to pan patrol Return to home position if the camera idles for seconds If you select this option the Network Camera will automatically pan patrol or return to the home position after idling for a specific time span Please remember to click Save to enable the settings m he Preset Locations will be displayed on the Home page VIVOTEK 12x Zoom Speed Dome Network Camera Wh SS T a fon ny nusu maa Digital Output 2010106117 14 39 24 uu Loi Zoom Lol Focus Tilt speed jo vi Zoom speed Jo vi Focus speed o w amp Client Settings z Configuration EB Language Powered by yIWaTEk m Click Go to The Network Camera will move to the preset location m Click Patrol The Network Camera will patrol among the selected preset positions continuously Homepage Layout This section explains how to set up your own customized homepage layout Preview This column shows the settings of your homepage layout You can manually select the background and font colors in Theme Options the third column on this page The settings will be displayed automatically in this Preview field The following shows the homepage using the default settings Preview VIVOTEK 12x Zoom Speed Dome Video Stream E w Digital Output On oF POMO Me ra Mra Hide Powered by VIVOTEK m Hide Powered
120. passord CA certificate status no file Remove client certificate status no file Remove Client private key Status no file Remove 3 When all settings are complete move the Network Camera to the protected LAN by connecting it to an 802 1x enabled switch The devices will then start the authentication automatically NOTE gt The authentication process for 802 1x 1 The Certificate Authority CA provides the required signed certificates to the Network Camera the supplicant and the RADIUS Server the authentication server 2 A Network Camera requests access to the protected LAN using 802 1X viaa switch the authenticator The client offers its identity and client certificate which is then forwarded by the switch to the RADIUS Server which uses an algorithm to authenticate the Network Camera and returns an acceptance or rejection back to the switch 3 The switch also forwards the RADIUS Server s certificate to the Network Camera 4 Assuming all certificates are validated the switch then changes the Network Camera s state to authorized and is allowed access to the protected network via a pre configured port Certificate Authority CA Certificate Certificate QoS Quality of Service Quality of Service refers to a resource reservation control mechanism which guarantees a certain quality to different services on the network Quality of service guarantees are important if the network capacity is insuff
121. ps 7 4Kbps 7 95Kbps 10 2Kbps and 12 2Kbps m G 11 also provides good sound quality and requires about 64Kbps Select pcmu u Law or pcma A Law mode When completed with the settings on this page click Save to enable the settings Motion Detection This section explains how to configure the Network Camera to enable motion detection A total of three motion detection windows can be configured Enable motion detection VideotTCP Ayy 2010 05 05 13 44 17 mE eens ae Motion Detection Setting 1 For normal situations sensitrity 0 Motion Detection Setting 2 C Frome J For special situations Follow the steps below to enable motion detection 1 Click New to add a new motion detection window 2 In the Window Name text box enter a name for the motion detection window m To move and resize the window drag and drop your mouse on the window m lo delete window click X on the top right corner of the window 3 Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the Sensitivity and Percentage slider bar 4 Click Save to enable the settings 5 Select Enable motion detection to enable this function For example p Enable motion detection Video TCP AV 2010 05 06 13 44 17 Fercentage j __ _ 10 The Percentage Indicator will rise or fall depending on the variation between sequential images When motions are detected by the Networ
122. put on ET 20100503 16 22 03 Lula Focus Pan speed 0 vi Titspeed o vi Zoom speed lo jl 4 Focus speed lo M t Clent Settings Configuration Be Language ca tn tj Wo B a LYLE co to seiectone YA Powered by VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers RTSP players 3GPP compatible mobile devices and VIVOTEK recording software Using Web Browsers Use Installation Wizard 2 IW2 to access to the Network Cameras on the LAN If your network environment is not a LAN follow these steps to access the Network Camera 1 Launch your web browser ex Microsoft Internet Explorer Mozilla Firefox or Netscape 2 Enter the IP address of the Network Camera in the address field Press Enter 3 The live video will be displayed in your web browser 4 If it is the first time installing the VIVOTEK network camera an information bar will pop up as shown below Follow the instructions to ners the required plug in on your computer 4 oh tga aua e bo OF E fe a ee a E 4 agpi joa T E FT ib ei ee mPp E E buod B bil e b oa aa eee Ma a oh i Ix Zoom Speed Dome ork Camera T VIVOTEK i2e Zoom Speed Doma Network Camera nes a me Sant Sein ia Aga n kaa a ee de ee ee Oe ki Bpa e FF Fam mn ha ei WE eaae Tiis e tps LL ae Demise ihm oe ke Fa TE EE
123. quality refers to the compression rate so a lower value will produce higher quality gt Converting high quality video may significantly increase the CPU loading and you may encounter streaming disconnection or video loss while capturing a complicated scene In the event of occurance we suggest you customize a lower video resolution or reduce the frame rate to obtain smooth video Audio Settings Audio Settings Mute External microphone input Odd Audio type AAC AAC bit rate Jokha GSM AMR OG711 Mute Select this option to disable audio transmission from the Network Camera to all clients Note that if mute mode is turned on no audio data will be transmitted even if audio transmission is enabled on the Client Settings page In that case the following message is displayed Warning Ed The media type has been changed to video only because the media from server contains no audio External microphone input Select the gain of the external audio input according to ambient conditions Adjust the gain from 21 db most sensitive or 33 db least sensitive Audio type Select audio codec AAC GSM AMR and G 711 m AAC provides good sound quality at the cost of higher bandwidth consumption The bit rates are selectable from 16Kbps 32Kbps 48Kbps 64Kbps 96Kbps and 128Kbps GSM ARM is designed to optimize speech quality and requires less bandwidth The bit rates are selectable from 4 75Kbps 5 15Kbps 5 90Kbps 6 7 Kb
124. r than n characters eg www ibm com email address lt n gt A string limited to an email address shorter than n characters eg joe www ibm com A string limited to an IP address eg 192 168 1 1 A string limited to contain a MAC address without hyphens or colons boolean A boolean value of 1 or O represents Yes or No True or False Enable or Disable lt valuel gt Enumeration Only given values are valid lt value2 gt lt value3 gt everything inside lt gt A description integer primary key SOLite data type A 32 bit signed integer The value is assigned a unigue integer by the server text SQLite data type The value is a text string stored using the database encoding UTF 8 UTF 16BE or UTF 16 LE window width and height eg 800x600 NOTE The camera should not be restarted when parameters are changed Group system NAME VALUE SECURITY DESCRIPTION get set hostname string 40 1 6 Host name of server Network Camera Wireless Network Camera Video Server Wireless Video Server ledoff aee Turn on 0 or turn off 1 all led indicators date lt yyyy mm dd gt Current date of system Set to keep to keep keep auto synchronize date time lt hh mm ss gt 6 6 Current time of the system Set to keep to keep keep time unchanged Set to auto to use NTP auto to synchronize time lt MMDDhhmmYYYY ss gt Another current time format of the syst
125. rator privileges Method GET POST Syntax http lt servername gt cgi bin admin syslog cgi Server will return the most up to date system log Return HTTP 1 0 200 OK r n Content Type text plain r n Content Length lt syslog length gt r n r n lt system log information gt r n Upgrade Firmware Note This request requires Administrator privileges Method POST Syntax http lt servername gt cgi bin admin upgrade cgi Post data fimage lt file name gt amp return lt return page gt JAN r n lt multipart encoded form data gt Server will accept the file named lt file name gt to upgrade the firmware and return with lt return page gt if indicated Camera Control capability ptzenabled Note This request requires Viewer privileges Method GET POST Syntax http lt servername gt cgi bin viewer camctrl cgi channel lt value gt amp camid lt value gt amp move lt value gt Move home up down left right amp focus lt value gt amp iris lt value gt Iris operation amp auto lt value gt Auto pan patrol amp zoom lt value gt amp zooming lt value gt amp zs lt value gt Zoom without stopping used for joystick amp vx lt value gt amp vy lt value gt amp vs lt value gt Shift without stopping used for joystick amp x lt value gt amp y lt value gt amp videosize lt value gt amp resolution lt value gt amp stretch
126. rigger Schedule and Action to set an event A total of 3 event settings can be configured Event name _ Enable this event Detect next event after 10 seconds Note This can only applied to motion detection and digital input Trigger Video motion detection Feriodically Digital input System boot Recording notify Event Schedule Sun Mon v Tue v Wed v Thu v Fri Sat Time Always From 00 00 ta 24 00 hh mm Action CL Trigger digital output for 1 seconds C Move to preset location Note Please configure Preset locations first E ke wee ee tr E Media a a J sD Event name Enter a name for the event setting Enable this event Select this option to enable the event setting Priority Select the relative importance of this event High Normal or Low Events with a higher priority setting will be executed first Detect next event after seconds Enter the duration in seconds to pause motion detection after a motion is detected 74 User s Manual An event is an action initiated by a user defined trigger source it is the causal arrangement of the following three elements Trigger Event Schedule and Action Trigger This is the cause or stimulus which defines when to trigger the Network Camera The trigger source can be configured to use the Network Camera s built in motion detection mechanism or external digital input devices There are several choic
127. rmware via FTP server By default the FTP port is set to 21 It also can be assigned to another port number between 1025 and 65535 RTSP Streaming To utilize RTSP streaming authentication make sure that you have set a password for the Network Camera first please refer to Security on page 28 for details RT SP Streaming Authentication Access name for stream 1 live sdp Access name for stream 2 live sdp Access name for stream 3 live3 sdp RTSP port 554 RTP port for video 5556 RTCP port for video RTP por for audio 5558 RTCP port for audio Authentication Depending on your network security reguirements the Network Camera provides three types of security settings for streaming via RTSP protocol disable basic and digest If basic authentication is selected the password is sent in plain text format but there can be potential risks of it being intercepted If digest authentication is selected user credentials are encrypted using MD5 algorithm thus providing better protection against unauthorized access The availability of the RTSP streaming for the three authentication modes is listed in the following table Quick Time player Real Player Disable O O Basic O O Digest O X Access name for stream 1 3 This Network camera supports multiple streams simultaneously The access name is used to differentiate the streaming source If you want to use an RTSP player to access the Network Camera you have to set the video m
128. s 12 16 on the combo cable connector When combo cable is connected to camera Lines from GND DO DI1 DIO the I O cable 20 16 14 12 22 n Terminal Crimp 2 Combo Cable Connector 21 15 13 DI 3 DI2 VIVOTEK Shown on the right is the connection diagram for 12V Digital inputs and outputs Power 12V 12V Network Deployment Setting up the Network Camera over the Internet There are several ways to set up the Network Camera over the Internet The first way is to set up the Network Camera behind a router The second way is to utilize a static IP The third way is to use PPPoE Internet connection via a router Before setting up the Network Camera over the Internet make sure you have a router and follow the steps below 1 Connect your Network Camera behind a router the Internet environment is illustrated below Regarding how to obtain your IP address please refer to Software Installation on page 12 for details af IP address 192 168 0 3 WAN Wide Area Network Router IP add f ISP Subnet mask 255 255 255 0 Internet AAA E Default router 192 168 0 1 S REJ LAN Local Area Network Router IP address 192 168 0 1 Cable or DSL Modem D IP address 192 168 0 2 Subnet mask 255 255 255 0 Default router 192 168 0 1 10 User s Manual 2 In this case if the Local Area Network LAN IP address of your Network Camera i
129. s 192 168 0 3 please forward the following ports for the Network Camera on the router m HTTP port m RTSP port m RTP port for audio m RTCP port for audio m RTP port for video m RTCP port for video If you have changed the port numbers on the Network page please open the ports accordingly on your router For information on how to forward ports on the router please refer to your router s user s manual 3 Find out the public IP address of your router provided by your ISP Internet Service Provider Use the public IP and the secondary HTTP port to access the Network Camera from the Internet Please refer to Network Type on page 35 for details Internet connection with static IP Choose this connection type if you are required to use a static IP for the Network Camera Please refer to LAN on page 35 for details Internet connection via PPPoE Point to Point over Ethernet Choose this connection type if you are connected to the Internet via a DSL Line Please refer to PPPoE on page 36 for details Software Installation Installation Wizard 2 IW2 free bundled software included on the product CD helps you set up your Network Camera on the LAN 1 Install IW2 under the Software Utility directory from the software CD S qn Double click the IW2 shortcut on your desktop to launch the program oy Installation Wizard 2 2 The program will conduct an analysis of your network environment After your network environment is an
130. s important to first verify that all contents received are complete according to the Package Contents listed below Take note of the warnings in the Quick Installation Guide before the Network Camera is installed then carefully read and follow the instructions in the Installation chapter to avoid damage due to faulty assembly and installation This also ensures the product is used properly as intended The Network Camera is a network device and its use should be straightforward for those who have basic networking knowledge It is designed for various applications including video sharing general security surveillance etc The Configuration chapter suggests ways to best utilize the Network Camera and ensure proper operations For creative and professional developers the URL Commands of the Network Camera section serves as a helpful reference to customizing existing homepages or integrating with the current web server Package Contents m SD8111 SD8121 m Hard Ceiling Mount Bracket and Decoration Ring m Cable Connector Power Video Out Mic In Audio Out Ground m DI DO Cable Connector Power Adaptor m Fixing Plate m Quick Installation Guide Warranty Card m Software CD Revision History m Rev 1 0 Initial release m Rev 1 1 Updated URL commands m Rev 1 2 Added the description for making the connections to DI DO pins VIVOTEK Physical Description SD SDHC Card Slot Lens Ethernet 10 100 RJ45 Socket Reset B
131. s your search criteria Trigger time Manually enter the time range you want to search Click Search and the recorded data corresponding to the search criteria will be listed in Search Results window Search Results The following is an example of search results There are four columns Trigger time Media type Trigger type and Locked Click to sort the search results in either direction Numbers of entries displayed on one page Search results show entries Trigger time Enter a key word to filter the search results Searcn 2009 03 05 10 47 57 2009 03 05 10 48 58 2009 03 05 10 49 58 2009 03 05 10 50 58 2009 03 05 10 51 58 2009 03 05 10 52 58 2009 03 05 10 53 58 2009 03 05 10 54 58 2009 03 05 10 55 57 bE ui ui uu ua F 2009 03 05 10 56 57 Showing 11 to 20 of 32 entries Videoclip Videoclip Videoclip Videoclip Videoclip Videoclip Videoclip Videocli Videocli JPEGs to AVI Periodical Periodical Periodical Periodical Periodical Periodical Periodical Periodical ly ly ly ly ly ly ly ly Periodical ly Lock Unlock gt Highlight an item Click to switch lt pages Download Uncheck All Note View and Download only apply to the highlight item View Click on a search result which will highlight the selected item in purple as shown above Click the View button and a media window will pop up to play back
132. support HTTP over SSL protocol_rtsp 0 7 Indicate whether to support RTSP protocol sip 0 7 Indicate whether to support SIP protocol_maxconn lt positive integer gt 0 7 The maximum allowed simultaneous ection connections protocol_maxgenc lt positive integer gt 0 7 The maximum general streaming connections onnection protocol_maxmeg lt positive integer gt 0 7 The maximum megapixel streaming aconnection connections protocol_rtp_multi lt boolean gt 0 7 Indicate whether to support scalable multicast cast_scalable protocol_rtp_multi lt boolean gt 0 7 Indicate whether to support backchannel cast backchannel multicast protocol_rtp_tcp 0 7 Indicate whether to support RTP over TCP protocol rtp http 0 7 Indicate whether to support RTP over HTTP protocol_spush_m lt boolean gt 0 7 Indicate whether to support server push MJPEG jpeg protocol snmp Indicate whether to support SNMP protocol ipv6 Indicate whether to support IPv6 videoin_type 0 1 2 0 7 0 gt Interlaced CCD 1 gt Progressive CCD 2 gt CMOS 0 7 Available resolutions list videoin resolution lt a list of available resolution separated by commas gt videoin_maxframe lt a list of available Available maximum frame list rate maximum frame rate separated by commas gt videoin _ codec lt a list of available Available codec list codec types separated by commas gt videoout_codec lt a list of the
133. tart end parameters have higher priority then the index parameter stat lt ipaddress gt The starting IP address to add or to delete end s lt ip address gt Ss The ending IP address to add or to delete index lt value gt Ss The start position to add or to delete return lt return page gt Redirect to the page lt return page gt after the parameter is assigned The lt return page gt can be a full URL path or relative path according to the current path If you omit this parameter it will redirect to an empty page Get SDP of Streams Note This request requires Viewer access privileges Method GET POST Syntax http lt servername gt lt network_rtsp_s lt O m 1 gt _accessname gt m is the stream number network_accessname_ lt O0O m 1 gt is the accessname for stream 1 to stream m Please refer to the subgroup of network rtsp for setting the accessname of SDP You can get the SDP by HTTP GET Open the Network Stream Note This request requires Viewer access privileges Syntax For HTTP push server MJPEG http lt servername gt lt network_http_s lt O m 1 gt _accessname gt For RTSP MP4 the user needs to input the URL below into an RTSP compatible player rtsp lt servername gt lt network_rtsp_s lt 0O m 1 gt _accessname gt m is the stream number For details on streaming protocol please refer to the control signaling a
134. ters For more information please refer to URL Commands of the Network Camera on page 100 Viewers access only the main page for live viewing Here you also can change a user s access rights or delete user accounts 1 Select an existing account to modify 2 Make necessary changes and click Update or Delete to enable the setting HTTPS Hypertext Transfer Protocol over SSL This section explains how to enable authentication and encrypted communication over SSL Secure Socket Layer It helps protect streaming data transmission over the Internet on higher security level Enable HTTPS Check this item to enable HTTPS communication then select a connection option HTTP amp HTTPS or HTTPS only Note that you have to create and install a certificate first in the second column before clicking the Save button Enable HTTPS To enable HTTPS you have to create and install certificate first Enable HTTPS secure connection HTTP amp HTTPS HTTPS only Create and install certificate method Create self signed certificate automatically Create self signed certificate manually Create certificate request and install Create and Install Certificate Method Before using HIT TPS for communication with the Network Camera a Certificate must be created first There are three ways to create and install a certificate Create self signed certificate automatically 1 Select this option 2 In the first column check Ena
135. the selected file For example Playback y ay Click to adjust the image size ADSR 2009 35 10 47 3 F f Download Click on a search result to highlight the selected item in purple as shown above Then click the Download button and a file download window will pop up for you to save the file JPEGs to AVI This functions only applies to JPEG format files such as snapshots You can select several snapshots from the list then click this button Those snapshots will be converted into an AVI file Lock Unlock Select the desired search results then click this button The selected items will become Locked which will not be deleted during cyclic recording You can click again to unlock the selections For example Search results Show 10 g entries Search 2009 03 05 10 47 57 Videoclip Periodically 2009 03 05 10 48 58 Videoclip Periodically 2009 03 05 10 49 58 Videoclip Periodically al 2009 03 05 10 50 58 Videoclip Periodically No F 2009 03 05 10 51 58 Videoclip Periodically No F 2009 03 05 10 52 58 Videoclip Periodically No F 2009 03 05 10 53 58 Videoclip Periodically No F 2009 03 05 10 54 58 Videoclip Periodically No F 2009 03 05 10 55 57 Videoclip Periodically No F 2009 03 05 10 56 57 Videoclip Periodically No showing 11 to 20 of 32 entries J P Remove Select the desired search results then click this button to delete the files System Log This section explains how to configure the Ne
136. this button to access the client setting page For more information please refer to Client Settings on page 23 Configuration Click this button to access the configuration page of the Network Camera It is suggested that a password be applied to the Network Camera so that only the administrator can configure the Network Camera For more information please refer to Configuration on page 25 Language Click this button to choose a language for the user interface Language options are available in English Deutsch Espa ol Francais Italiano H Axz Portugu s firt X and BAH Hide Button You can click the hide button to hide the control panel or display the control panel Resize Buttons If you select this option the video size on homepage will have 4 3 aspect ratio Click the Auto panon the video cell will resize automatically to fit the monitor Click 100 is to display the original homepage size Click 50 is to resize the homepage to 50 of its original size Click 25 is to resize the homepage to 25 of its original size Live Video Window m The following window is displayed when the video mode is set to H 264 MPEG 4 MPEG 4 Protocol and Media Options Video Title Title and Time o Ja m e tal at J pi wr fe Video and Audio Control Buttons Video Title The video title can be configured For more information please refer to Video Settings on page 55 H 264 MPEG 4 Protocol and Media Options The tr
137. tion Follow the steps below to install the Network Camera to the ceiling 1 Detach the Decoration Ring from the Hard Ceiling Mount Bracket 2 Align the three holes on the Mount Bracket mark the screws locations on the ceiling 3 Drill three pilot holes into the ceilling and hammer the plastic anchors into the holes 4 Fix the Mount Bracket with three screws 5 Put the decoration ring onto the dome body 6 Insert the fixing plate into the groove as shown below 7 Align the three holes to screw the fixing plate to the dome base 8 If you have external devices such as sensors and alarms connect them to the general I O terminal block Then connect the cable connector and Ethernet cable to the dome base 9 Align plate A and plate B use hole a c to hook the Network Camera on the ceiling mount bracket 10 Tighten the screw on the fixing plate 11 Align the three holes to mount the decoration ring 12 Connect the cables and make the network deployment Ground Power Cord Socket JL lm BNC Video Out gt Microphone In pink gt Ll Audio Out green gt Ethernet 10 100 RJ45 Plug Jil Ethernet Switch 13 If you have external sensors or alarms insert lines from the DI DO cable those with terminal crimps to pin
138. tion Type MD5 ka Authentication Password Encryption Password Read only Securityname Public Authentication Type MDS Authentication Password Encryption Password Network This section explains how to configure a wired network connection for the Network Camera Network Type Network Type LAN Get IP address automatically Use fixed IP address Enable UPnP presentation C Enable UPnP port forwarding PPPoE C Enable IPv LAN Select this option when the Network Camera is deployed on a local area network LAN and is intended to be accessed by local computers The default setting for the Network Type is LAN Remember to click Save when you complete the Network setting Get IP address automatically Select this option to obtain an available dynamic IP address assigned by the DHCP server each time the camera is connected to the LAN Use fixed IP address Select this option to manually assign a static IP address to the Network Camera Network Type LAN Get IP address automatically Use fixed IP address IP address 192 168 5 109 subnet mask 295 255 255 0 Default router 192 168 5 1 Primary DNS 192 168 0 10 secondary DNS 192 1686 0 20 Primary WINS server secondary WINS server Enable UPnP presentation PPPoE C Enable IPv6 1 You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the Network Camera on LAN Please refer to Software Installation on page
139. tocol EAP to facilitate communication m The components of a protected network with 802 1x authentication Supplicant Authenticator Authentication Server Network Camera Network Switch RADIUS Server 1 Supplicant A client end user camera which requests authentication 2 Authenticator an access point or a switch A go between which restricts unauthorized end users from communicating with the authentication server 3 Authentication server usually a RADIUS server Checks the client certificate and decides whether to accept the end user s access request m VIVOTEK Network Cameras support two types of EAP methods to perform authentication EAP PEAP and EAP TLS Please follow the steps below to enable 802 1x settings 1 Before connecting the Network Camera to the protected network with 802 1x please apply a digital certificate from a Certificate Authority ie MIS of your company which can be validated by a RADIUS server 2 Connect the Network Camera to a PC or notebook outside of the protected LAN Open the configuration page of the Network Camera as shown below Select EAP PEAP or EAP TLS as the EAP method In the following blanks enter your ID and password issued by the CA then upload related certificate s IEEE 807 1x Enable IEEE 802 1 EAP method Identity Password CA certificate status no file IEEE 802 1 Enable 802 1 EAP method Identity Private key
140. trator does not set up a root password For more information about how to set up a root password and manage user accounts please refer to Security on page 28 2 The administrator has set up a root password but set RTSP Authentication to disable For more information about RTSP Authentication please refer to RTSP Streaming on page 48 3 The administrator has set up a root password but allows anonymous viewing For more information about Allow Anonymous Viewing please refer to Security on page 28 m Refresh Click this button to refresh all current connections m Add to deny list You can select entries from the Connection Status list and add them to the Deny List to deny access Please note that those checked connections will only be disconnected temporarily and will automatically try to re link again IE Explore or Quick Time Player If you want to enable the denied list please check Enable access list filtering and click Save in the first column m Disconnect If you want to break off the current connections please select them and click this button Please note that those checked connections will only be disconnected temporarily and will automatically try to re link again IE Explore or Quick Time Player Enable access list filtering Check this item and click Save if you want to enable the access list filtering function Filter Type Select Allow or Deny as the filter type If you choose Allow Type only those clients whose IP a
141. ttp dyn interfree it Access List This section explains how to control access permission by verifying the client PC s IP address General Settings General Settings Maximum number of concurrent streaming connection s limited to 10 sg View Information Enable access list filtering Maximum number of concurrent streaming connection s limited to Simultaneous live viewing for 1 10 clients including stream 1 stream 5 The default value is 10 If you modify the value and click Save all current connections will be disconnected and automatically attempt to re link IE Explore or Quick Time Player View Information Click this button to display the connection status window showing a list of the current connections For example Connection status IP address Elapsed time User ID 192 168 1 147 12 20 34 61 22 15 3 00 10 09 C 192 168 3 25 45 00 34 m IP address Current connections to the Network Camera m Elapsed time How much time the client has been at the webpage m User ID If the administrator has set a password for the webpage the clients have to enter a user name and password to access the live video The user name will be displayed in the User ID column If the administrator allows clients to link to the webpage without a user name and password the User ID column will be empty There are some situations which allow clients access to the live video without a user name and password 1 The adminis
142. ttp 92 166 5 10 cgi bin upload cai Aaa FTP Delete Media Settings Available memory space 8000KB Name Type Snapshot snapshot Video Clip videoclip System log systemlog Snapshot Customized Script Name Date Time When the Event Status is ON once an event is triggered by motion detection the Network Camera will automatically send snapshots via e mail If you want to stop the event trigger you can click ON to turn it to OFF status or click Delete to remove the event setting To remove a server setting from the list select a server name from the drop down list and click Delete Note that only when the server setting is not being applied to an event setting can it be deleted To remove a media setting from the list select a media name from the drop down list and click Delete Note that only when the media setting is not being applied to an event setting can it be deleted Server Settings Click Add Server on Event Settings page to open the Server Setting page On this page you can specify where the notification messages are sent when a trigger is activated A total of 5 server settings can be configured server name Enter a name for the server setting server Type There are four choices of server types available Email FTP HTTP and Network storage Select the item to display the detailed configuration options You can configure either one or all of them Email Select to send the media files vi
143. ture a reference line will be visible when the camera tilt is under 0 or over 180 to help verify that the camera is mounted to a flat surface Group snmp capability snmp product dependent NAME VALUE SECURITY DESCRIPTION get set secnamerw string 31 6 6 Read write security name string 128 Description of Camera contactor Ex E mail Group privacymask_c lt 0 n 1 gt for n channel product NAME VALUE SECURITY DESCRIPTION get set lt boolean gt Enable privacy mask win i lt 0m4 gt enable lt boolean gt Enable privacy mask window string 14 Name of the privacy mask window win i lt 0m4 gt top 0 240 288 win i lt 0m4 gt width 0 320 352 win i lt 0m4 gt height 0 240 288 Top coordinate of window position Width of privacy mask window Height of privacy mask window acy Mes Group privacymask3d_c lt O n 1 gt for n channel product NAME VALUE SECURITY DESCRIPTION get set Group capability NAME VALUE SECURITY DESCRIPTION get set api_httpversion 0200a The HTTP API version bootuptime lt positive integer gt 0 7 Server bootup time nir 0 0 7 Number of IR interfaces lt positive integer gt npir 0 0 7 Number of PIRs lt positive integer gt ndi 0 0 7 Number of digital inputs lt positive integer gt ndo 0 0 7 Number of digital outputs lt positive integer gt naudioin 0 0 7 Number of audio inputs lt positive integer gt naudioout 0 0 7 N
144. tus Remove NOTE gt How do cancel the HTTPS settings 1 Uncheck Enable HTTPS secure connection in the first column and click Save a warning dialog will pop up 2 Click OK to disable HTTPS Enable HTTPS To enable HTTPS you have to create and install certificate first Enable HTTPS secure connection Microsoft Internet Explorer ak A This will stop the HTTPS service do you really want to stop it Create and install certificate method Create self signed certificate automatically mee sb elt cise ad eon tifi a ste ee es toe 3 The webpage will redirect to a non HTTPS page automatically gt If you want to create and install other certificates please remove the existing one To remove the signed certificate uncheck Enable HTTPS secure connection in the first column and click Save Then click Remove to erase the certificate Certificate Information Status Country Microsoft Internet Explorer State or province P Pi Gre you sure you want to delete the certificate Locality S Common Name IF Address Organization Organization Unit SNMP Simple Network Management Protocol This section explains how to use the SNMP on the network camera The Simple Network Management Protocol is an application layer protocol that facilitates the exchange of management information between network devices It helps network administrators to remotely manage network devices and find solve network problems w
145. twork Camera continuously sends JPEG images to the client producing a moving effect similar to a filmstrip Every single JPEG image transmitted guarantees the same image quality which in turn comes at the expense of variable bandwidth usage Because the media contents are a combination of JPEG images no audio data is transmitted to the client There are three parameters provided in MJPEG mode to control the video performance Video quality settings for stream 3 MPEG 4 OH 264 JPEG Frame size QCIF w Mazimum frame rate 30 fps a Video quality Good m Frame size You can set up different video resolution for different viewing devices For example set a smaller frame size and lower bit rate for remote viewing on mobile phones and a larger video size and a higher bit rate for live viewing on web browsers Note that a larger frame size takes up more bandwidth m Maximum frame rate This limits the maximum refresh frame rate per second Set the frame rate higher for smoother video quality The frame rates are selectable at 1fps 2fps 3fps 5fps 8fps 10fps 15fps 20fps 25fps and 30fps You can also select Customize and manually enter a value The frame rate will decrease if you select a higher resolution m Video quality The video quality can be adjusted to the following settings Medium Standard Good Detailed and Excellent You can also select Customize and manually enter a value NOTE gt Video quality and fixed
146. twork Camera to send the system log to the remote server as backup Remote Log Remote Log Enable remote log Log server settings IP address port 514 You can configure the Network Camera to send the system log file to a remote server as a log backup Before utilizing this feature it is suggested that the user install a log recording tool to receive system log messages from the Network Camera An example is Kiwi Syslog Daemon Visit http www kiwisyslog com kiwi syslog daemon overview I Erri Sythe Daemon aren 7 1 4 Fie Yew Help 2O E A Dipa 00 Daan 01 12 2000 Vette Uperlinto T2160 5 121 ATS SCAVOR Stop one pession I P 1 52 160 5 122 01 12 2000 Vette Uperlnta 2 166 5121 ATSP SEAVER Siart one kanisa P192 168 5 122 Ol 12 200 Weta Sevlogledo T32 168 5171 pelo 141 peat Follow the steps below to set up the remote log 1 In the IP address text box enter the IP address of the remote server 2 In the port text box enter the port number of the remote server 3 When completed select Enable remote log and click Save to enable the setting Current Log Current Log Jan 13 04 03 00 syslogd 1 5 0 restart Jan 13 04 03 01 swatchdog 317 Ready to watch httpd Jan 13 04 03 02 EVENT MGR Starting eventmar with support for EcTun Jan 13 04 03 11 DRM Service Starting DRM service Jan 13 04 03 16 iris AL CTRL Function Version 1 0 0 12 E Jan 13 04 03 17 IR Cut Control Day mode Jan 13 04 03 1
147. umber of audio outputs nuart 0 0 7 Number of UART interfaces lt positive integer gt nvideoin 0 7 nmediastream 0 7 7 0 7 lt positive integer gt nvideoinprofile lt positive integer gt Number of videoin profiles nmotionprofile lt positive integer gt Number of motion profiles ptzenabled lt positive integer gt 0 7 An 32 bit integer each bit can be set separately as follows Bit 0 gt Support camera control function O not support 1 support Bit 1 gt Built in or external camera O external 1 built in Bit 2 gt Support pan operation O not support 1 support Bit 3 gt Support tilt operation O not support 1 support Bit 4 gt Support zoom operation O not support 1 support Bit 5 gt Support focus operation O not support 1 support Bit 6 gt Support iris operation O not support 1 support Bit 7 gt External or built in PT O built in 1 external Bit 8 gt Invalidate bit 1 7 O bit 1 7 are valid 1 bit 1 7 are invalid Bit 9 gt Reserved bit Invalidate lens_pan Lens_tilt lens zoon lens focus len_iris O fields are valid lt positive integer gt 0 7 Number of preset locations eptz lt positive integer gt 0 7 A 32 bit integer each bit can be set separately as follows Bit 0 gt stream 1 supports ePTZ or not Bit 1 gt stream 2 supports ePTZ or not The rest may be deduced by analogy protocol_https 0 7 Indicate whether to
148. uto gt auto daynight ule day nig night gt ircut filter on Pf o i 4 4 exposurecontrol shutterpriority gain O 15 day gt ircut filter off schedule gt scheduled ircut filter Select exposure mode 0 gt Auto with IRCut 1 gt Shutter priority Manual mode 1 60 1 50 1 100 1 100 1 125 1 120 1 180 1 150 1 250 1 215 1 500 1 425 1 1000 1 1000 1 2000 1 1750 1 4000 1 3500 1 10000 1 6000 1 2 1 2 1 4 1 3 1 8 1 6 1 15 1 12 1 30 1 25 1 60 1 50 1 100 1 100 1 125 1 120 1 180 1 150 1 250 1 215 10 gt 1 500 1 425 11 gt 1 1000 1 1000 12 gt 1 2000 1 1750 13 gt 1 4000 1 3500 14 gt 1 10000 1 6000 0 gt 0dB 1 gt 2dB 2 gt 4dB 3 gt 6dB 4 gt 8dB 5 gt 10dB 6 gt 12dB 7 gt 14dB 8 gt 16dB ow ADA N WD UH A U N e OJO WA NOURA U N e O 9 gt 18dB 10 gt 20dB 11 gt 22dB 12 gt 24dB 13 gt 26dB 14 gt 28dB enableblc Enable backlight compensation twodnoisereduction 2D Noise Reduction threednoisereduction lt Boolean gt 4 4 3D Noise Reduction a Group videoin profile i lt O m 1 gt SECURITY DESCRIPTION get set policy day The mode which the profile is applied to night schedule E begintime _ E Begin time of schedule mode exposurecontrol 3 Select exposure mode 0 gt Auto with IRCut 1 gt Shutter priority Manual mode shutterpriority 1 60 1 5
149. utton Restore Button Cable Connector Socket Network Camera VIVOTEK Model No SD8121 C CR MAC 0002D107258A NA mm ODO UE RES EN rons TAN Class A TL at ladeinTaiwan jet Bay yig P N XXXXXXXXXG Keep a note of the MAC address before installing amera General 1 0 Terminal Block This Network Camera provides a general I O terminal block which is used to connect external input output devices The pin definitions are described below 24eeee LI I 22 130 o o o o o 21 Note that the disgram shows the pin assignments on the combo Cable Connector 4 User s Manual VIVOTEK Hardware Reset Reset Button Restore Button So i cO N11360 m UT PE ea Class A P N XXXXXXXXXG Made in Taiwan T The reset button is used to reset the system or restore the factory default settings Sometimes resetting the system can return the camera to normal operation If the system problems remain after reset restore the factory settings and install again Reset Press and release the reset button with a paper clip or thin object Wait for the Network Camera to reboot Restore Press and hold the reset button for a few seconds Note that all settings will be restored to factory default SD SDHC Card Capacity This network camera is compliant with SD SDHC 32GB and other preceding standard SD cards User s Manual 5 Installation Hardware Installa
150. vanced mode 1 2 x the current state detected is High 4 the current state detected is High Digital output The active state is the current state detected is Open Click to switch to Advanced Mode Version 0100b Firmware Version VIVOTEK Advanced Mode Cerin gt System Sala Hogl name 121 Zoom Speed Dome Network Camera Synem Tine Time zone Gill a 00 Bina Ghonpoing Hong Kong Kuala Lampur Singaoone Taipei dafu vane C Mamasi 2 automatic Di and DO Digital input The acte stale is Low a zina current state detected is High Low o zina current state detected is High 3 Low MI the current state detected is High 4 Low 9 tha curvent state detected is High Configuration List Click to switch to Basic Mode 5 Teron Ua Firmware Version Each function on the configuration list will be explained in the following sections Those functions that are displayed only in Advanced Mode are marked with Advanced Mode If you want to set up advanced functions please click Advanced Mode on the bottom of the configuration list to quickly switch over System This section explains how to configure the basic settings for the Network Camera such as the host name and system time It is composed of the following three columns System System Time and DI and DO When finished with the settings on this page click Save at the bottom of the page to enable the settings Syst
151. y If the multicast RTP video ports are incorrectly assigned the following warning message will be displayed tle rent Intar ped Faxphorn pis free feet Pate Pilea pees I edhe fet ed be rh ee ee Ca Multicast TTL 1 255 The multicast TTL Time To Live is the value that tells the router the range a packet can be forwarded DDNS This section explains how to configure the dynamic domain name service for the Network Camera DDNS is a service that allows your Network Camera especially when assigned with a dynamic IP address to have a fixed host and domain name DDNS Dynamic domain name service DDNS Dynamic domain name service Enable DDNS Provider Dyndns org Dynamic Hostname User name Password Enable DDNS Select this option to enable the DDNS setting Provider Select a DDNS provider from the provider drop down list VIVOTEK offers Safe100 net a free dynamic domain name service to VIVOTEK customers It is recommended that you register Safe100 net to access VIVOTEK s Network Cameras from the Internet Additionally we offer other DDNS providers such as Dyndns org Dynamic Dyndns org Custom TZO com DHS org CustomSafe100 dyn interfree it Note that before utilizing this function please apply for a dynamic domain account first m Safe100 net 1 In the DDNS column select Safe100 net from the drop down list Click accept after reviewing the terms of the Service Agreement 2 In the Re

Download Pdf Manuals

Related Search

Related Contents

HDT-1000  Targus Slim-line Case f/ MacBook  Descargar manual de instrucciones en formato PDF.  Samsung Galaxy Trend 2 Bruksanvisning  What is Wireless? - D-Link  Téléchargement fiche technique  FLEX 100H • VHR70R • VHR100R • VHR150R  

Copyright © All rights reserved. Failed to retrieve file