Philips AS170
Contents
1. Activate deactivate alarm timer d Press AL1 AL2 to view alarm settings 2 Press AL1 AL2 again to activate or deactivate the alarm timer L gt The alarm icon appears if alarm timer is on and disappears if it is off e To stop the ringing alarm press the corresponding AL1 AL2 L gt The alarm repeats ringing for the next day Snooze alarm When alarm sounds press SNOOZE L gt The alarm snoozes and repeats ringing nine minutes later Set sleep timer This docking system can switch to standby mode automatically after a preset period Press SLEEP repeatedly to select the sleep timer period in minutes L gt When the sleep timer is activated zZ appears To deactivate the sleep timer Press SLEEP repeatedly until OFF off appears 15 gt 30 gt 60 gt 90 gt 120 top _E dS Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness levels EN 17 9 Product Supported profiles A2DP 1 0 AVRCP 1 0 Range 10 m Free space information hee Tuner FM e Product information is subject to change without prior Tuning Range 87 5 108 notice MHz Sensitivity lt 22 dBf Mono 26dB S N Ratio Search Selectivity gt 28 dBf General information Total Harmonic Distortion lt 3 Signal to Noise Ratio gt 50 dB AC Power Model AS100 050 AE200 Input 100 240 V 50 60 Hz 0 5 A Amp2. Do not use this apparatus near water e Clean only with dry cloth Do not block any ventilation openings nstall in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat e Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Only use power supplies listed in the user manual e Unplug this apparatus during lightning storms or when unused for long periods of time e Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped e Apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles e Where the plug of the Direct Plug in Adaptor is used as the disconnect device 2 Your Docking System for Android Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers regis
3. Note e The USB socket is used for charging only 14 EN 6 Listen to FM radio Tune to FM radio stations Tip e Position the antenna as far as possible from TV VCR or other radiation source e For better reception fully extend and adjust the position of the antenna Press SOURCE SET repeatedly to select FM preset FM mode In FM preset mode 2 Press and hold TUNE TIME or TUNE TIME for two seconds L gt The docking system tunes to a station with strong reception automatically 3 Repeat step 2 to tune to more radio stations In FM mode To tune to a radio station automatically e Press and hold TUNE TIME or TUNE TIME for two seconds To tune to a radio station manually e Press TUNE TIME or TUNE TIME repeatedly until you find optimal reception Store FM radio stations automatically Note e You can store a maximum of 20 FM radio stations In FM preset mode The first time you turn to FM preset mode press an hold SOURCE SET for two seconds L gt The docking system stores all the available FM radio stations and broadcasts the first available station automatically To store FM radio stations automatically afterwards e In FM mode press and hold SOURCE SET for two seconds Store FM radio stations manually Tune to an FM radio station Press and hold SOURCE SET for two seconds L gt The preset number begins to blink Press TUNE T
4. exhausted batteries and old equipment Trademark notice The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Philips is under license Copyright 2013 Koninklijke Philips Electronics N V Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly PHILIPS Specifications are subject to change without notice 2013 Koninklijke Philips Electronics N V All rights reserved AS170_UM_12_V1 0
5. gt The audio comes out through the docking system Remove AS170 from Home screen 1 Tap on the top of the widget L gt A list of Available Philips BT devices is displayed 2 Select AS170 AS170 SB3700 BT 3 Tap Remove Remove Disconnect a device To disconnect a Bluetooth device e Press SOURCE SET to select another source e Deactivate Bluetooth function on your device or e Move it beyond the communication range EN 11 12 L gt The Bluetooth indicator turns off EN 5 Dock and charge Android powered phone Charge through Micro USB connector Dock your Android device to the Micro USB connector for charging 1 Check the orientation of the micro USB socket on your Android device m m C amp D C amp S e If necessary rotate the USB connector on the docking system 3 Rotate the wheel to adjust the height of micro USB connector 4 Slide the connector to place your Android device on the dock stably 2 Connect your Android device to the micro USB connector L gt When the docking system is connected to the power your docked device starts charging automatically Charge through USB socket Connect a USB cable to AS170 and your Android device for charging EN 13 1 Connect a USB cable not supplied to e the USB socket on the back of AS170 e the USB socket on your device 2 Connect AS170 to power L gt Once the device is recognized the charging starts
6. Always there to help you Register your product and get support at www philips com welcome OLN Question Contact AS170 Philips User manual PHILIPS Contents 1 Important 2 Important Safety Instructions 2 2 Your Docking System for Android 3 Introduction 3 What s in the box 3 Overview of the docking system 4 3 Get started 6 Connect power 6 Turn on 6 Select a source 6 Set time 6 4 Play through Bluetooth 8 Compatible with Android 8 Play audio through manual Bluetooth connection 8 Play audio through auto Bluetooth connection with Philips Bluetooth Audio Connect 9 Disconnect a device 11 5 Dock and charge Android powered phone 13 Charge through Micro USB connector 13 Charge through USB socket 13 6 Listen to FM radio 15 Tune to FM radio stations 15 Store FM radio stations automatically 15 Store FM radio stations manually 15 Select a preset radio station 15 7 Play through audio cable 16 8 Other features 17 Set alarm timer 17 Set sleep timer 17 EN Adjust display brightness 17 9 Product information 18 General information 18 Bluetooth 18 Tuner FM 18 Amplifier 18 Speakers 18 10 Troubleshooting 19 General 19 About Bluetooth device 19 11 Notice 20 Compliance 20 Recycling 20 Trademark notice 20 Copyright 20 the disconnect device shall remain readily 1 mMm po rtant operable Important Safety Instructions e Heed all warnings e Follow all instructions
7. IME or TUNE TIME repeatedly to select a number Press SOURCE SET for two seconds again o confirm KR WwW N om Repeat steps 1 to 4 to store other stations Note To remove a pre stored station store another station in its place Select a preset radio station In FM preset mode press TUNE TIME or TUNE TIME repeatedly to select a preset number EN 15 7 Play through audio cable Through an MP3 link cable you can also play on AS170 from an external audio device such as an MP3 player 1 Connect an audio input cable with a 3 5 mm connector on both ends between e the AUDIO IN socket on this docking system and e the headphone socket of an external device 2 Press SOURCE SET to select AUDIO IN mode 3 Play audio on the external device refer to its user manual 8 Other features Set alarm timer Note e Make sure that you have set the clock correctly d Press and hold AL1 AL2 for 2 seconds to activate alarm setting L gt The hour digits blink 2 Press TUNE TIME or TUNE TIME repeatedly to adjust hour Press SOURCE SET to confirm L gt The minute digits blink UJ 4 Repeat steps 2 3 to set the minute 5 Repeat steps 2 3 to select an alarm source e TUNE select your last listened FM channel as alarm sound e BUZ select buzzer as alarm sound 6 Repeat steps 2 3 to set the alarm volume L gt The alarm time and icon are displayed
8. OURCEISET to confirm L gt The hour and minute digits begin to blink 4 Press TUNE TIME or TUNE TIME repeatedly to set the hour Press SOURCE SET to confirm L gt Minute digits begin to blink Press TUNE TIME or TUNE TIME repeatedly to set the minute Press SOURCE SET to confirm L gt The set time is displayed EN 4 Play through Bluetooth With AS170 you can enjoy audio in two ways e through manual Bluetooth connection e through automatic Bluetooth connection with Philips Bluetooth Audio Connect app Compatible with Android To make full use of your docking system your Android powered device should satisfy the following requirements e With Android operation system Version 2 1 or above e With Bluetooth software Version 2 1 or above and e With a micro USB connector For other devices with micro USB connector and Bluetooth function you can still use the docking system to do the the following e Charge your device through the USB connector e Enjoy audio through Bluetooth Play audio through manual Bluetooth connection The docking speaker uses Bluetooth wireless technology to stream music from your portable device to the speaker e Philips does not guarantee the compatibility with all Bluetooth devices e Before pairing a device with this docking speaker read its user manual for Bluetooth compatibility Make sure that the connected Bluetooth device supports th
9. been interrupted or the power adapter has been disconnected e Reset the clock About Bluetooth device Music playback is unavailable on the system even after successful Bluetooth connection e The device cannot be used with the system to play music The audio quality is poor after connection with a Bluetooth enabled device e The Bluetooth reception is poor Move the device closer to the system or remove any obstacle between the device and the system Cannot connect with the system e The device does not support the profiles required for the system e The Bluetooth function of the device is not enabled Refer to the user manual of the device for how to enable the function e The system is not in the pairing mode e The system is already connected with another Bluetooth enabled device Disconnect that device or all other connected devices and then try again The paired device connects and disconnects constantly e The Bluetooth reception is poor Move the device closer to the system or remove any obstacle between the device and the system For some devices the Bluetooth connection may be deactivated automatically as a power saving feature This does not indicate any malfunction of the system EN 19 11 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user s authority to operate the equipment C
10. e Advanced Audio Distribution Profile A2DP and the Audio Video Remote Control Profile AVRCP e The product can memorize a maximum of 4 paired devices e Make sure that Bluetooth function is enabled on your device and your device is set as visible to all other Bluetooth devices e The operational range between this docking speaker and a Bluetooth device is approximately 10 meters 30 feet e Any obstacle between this docking speaker and a Bluetooth device can reduce the operational range e Keep away from any other electronic device that may cause interference Pair with Bluetooth devices 1 Press POWER to turn on the docking system 2 Press SOURCE SET to select Bluetooth mode L gt The Bluetooth indicator blinks on the display panel 3 On your Android powered devices activate the Bluetooth feature and search for AS170 4 In the device list tap PHILIPSAS170 L After a successful connection AS170 beeps twice and the Bluetooth indicator turns steadily on 5 Play audio on your Bluetooth device Ls Audio comes out through the docking system Tip e To clear paired devices from AS170 press and hold POWER for five seconds Play audio through auto Bluetooth connection with Philips Bluetooth Audio Connect Philips Bluetooth Audio Connect establishes automatic Bluetooth connection by adding a shortcut of your docking system to the Home screen of your Android po
11. e Make sure that AS170 is switched on 1 Press SOURCE SET to select Bluetooth mode 2 On the Home screen of your Android device tap the widget to search and connect other Bluetooth devices 10 EN PHILIPS Searching L gt The widget starts to search and connect Bluetooth devices that can be paired automatically L gt The Bluetooth feature of your device is activated automatically Connecting e If necessary select AS170 from the Available Philips BT devices list to continue the connection SB3700 BT L gt It may take a few seconds to complete the connection L gt After a successful connection AS170 is added to the Home screen a different Bluetooth icon is displayed on the top of the screen L gt AS170 beeps twice 3 f necessary tap on the top of the widget to rename or change the icon of AS170 e Tap AS170 and input the new name e Tap the check box to change the icon of your device Remove 4 Play audio on your Android device L gt The audio comes out through the docking system Next time launch 1 Next time you switch on AS170 the docking system connects to the last paired device automatically If two or three paired devices are switched on tap AS170 on your Android device to pair L gt After a successful connection a different Bluetooth icon is displayed on the top of the screen and AS170 beeps twice 2 Play audio on your Android device L
12. lifier Output 5 V 2 0 A Rated Output Power 2 X 2 5W RMS Operation Power lt 15W Consumption Standby Power lt 1W Consumption Speakers Max load of Android BW AS output Speaker impedance 4 Ohm Max load of USB output 5V 1 6A Speaker driver 1 5 full range Dimensions 137 x 98 x 141 mm Main Unit W x H xD Weight 1 0 kg With Packing 0 56 kg Main Unit Note e Maximum current is 1 6 A when the Micro USB connector and USB socket are used for charging simultaneously or separately Bluetooth Bluetooth specification V3 0 EDR 18 EN 10 Troubleshooting Warning e Never remove the casing of this device To keep the warranty valid never try to repair the system yourself If you encounter problems when using this device check the following points before requesting service If the problem remains unsolved go to the Philips Web page www philips com support When you contact Philips make sure that the device is nearby and the model number and serial number are available General No power e Ensure that the AC power plug of the unit is connected properly e Ensure that there is power at the AC outlet No sound or poor sound e Adjust the volume of your docking speaker and Bluetooth device e Make sure that the Bluetooth connection is valid between your Bluetooth device and the docking speaker Clock setting erased e Power has
13. nd hold to search for FM radio stations e Press to tune to FM radio stations in FM mode e Press to select a preset radio station in FM preset mode e Press to set the clock Micro USB connector EN 3 Get started Always follow the instructions in this chapter in sequence Connect power Caution e Risk of product damage Make sure that the power supply voltage matches the voltage printed on the bottom of the docking system e Risk of electric shock When you unplug the AC adapter always pull the plug from the socket Never pull the cord Note e The type plate is located on the bottom of the docking system Connect the AC power adapter between e the DC IN socket at the back of the docking system and e the power supply Turn on Press POWER L gt The docking system switches to the last selected source ON 4 Standby Switch to standby mode Press POWER again to switch the docking system to standby mode L gt The clock if set is displayed Select a source Press SOURCE SET repeatedly to select a source FM preset FM Bluetooth or AUX in Note e When an android powered device is docked the system automatically switches to Bluetooth mode Set time 1 Press and hold SOURCE SET for two seconds L gt 24H or 12H begins to blink 2 Press TUNE TIME or TUNE TIME to select 24H or 12H for 12 or 24 hour format 3 Press S
14. ompliance C 0890 This product complies with the radio interference requirements of the European Community Hereby Philips Consumer Lifestyle declares that his speaker is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the EC declaration of Conformity is available in the Portable Document Format PDF version of the user manual at www philips com support Recycling ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you see the crossed out wheel bin symbol attached to a product it means the product is covered by the European Directive 2002 96 EC pe 20 EN Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials
15. ter your product at www philips com welcome Introduction With this docking system you can e enjoy audio from your Bluetooth devices or other external audio devices e charge your android powered device e listen to FM radio and e wake up to buzzer alarm or radio What s in the box Check and identify the contents of your package e Main unit e Power adapter e Audio input cable 3 5 mm connectors Short user manual Safety and notice EN Overview of the docking system POWER e Press to turn on the docking system or switch it to standby mode AUDIO IN e Connect an external audio device CHARGING e Charge your mobile phone FM ANTENNA e Improve FM reception DC IN Connect to the power adapter G oh EN SOURCE SET e Press to select a source FM preset FM Bluetooth or AUX IN e Press and hold to start to set the clock e Press and hold to store preset radio stations T Wheel e Rotate to adjust the height of micro USB connector AL1 AL2 Press and hold to start to set alarm e Press to view alarm settings e Press to activate or deactivate alarm imer SNOOZE BRIGHTNESS SLEEP e Press and hold to set sleep timer e Press to adjust display brightness e Press to snooze alarm Display panel e Show current information VOLUME e Press to increase or decrease the volume TUNE TIME TUNE TIME e Press a
16. wered device To enjoy the feature you are recommended to download and install this free app Install Philips Bluetooth Audio Connect app You can search Philips Bluetooth Audio Connect from Google Play directly and then install the app Note e Make sure that your Android device is connected to the Internet e Make sure that Google Play is available on your Android device 1 Search for Philips Bluetooth Audio Connect app on the Play Store of your device 2 From the search result list find and tap Philips Bluetooth Audio Connect to start downloading 3 Follow the onscreen instructions to install the Philips Bluetooth Audio Connect 4 When installation is complete tap Done Two Philips Bluetooth Audio Connect widgets are installed and saved at the widgets screen Widgets SA Philips Bluetooth Audi Philips Bluetooth Audi 2x1 4x1 oS en E um Add the Philips widget to your Home screen EN 9 Add one or both of the widgets to the Home screen of your Android device refer to the user manual of your device e Philips Bluetooth Audio Connect 2 X 1 add one of your favorite Bluetooth devices PHILIPS Add device e Philips Bluetooth Audio Connect 4 X 1 add three of your favorite Bluetooth devices PHILIPS Add device Add device Add device Activate Bluetooth with Philips Bluetooth Audio Connect Add AS170 to your Home screen Note
Download Pdf Manuals
Related Search