Siemens WM14Y790GB washing machine
Contents
1. Dispenser I Detergent for prewash Dispenser amp Softener starch Do not exceed the maximum load Dispenser Il Detergent for main wash water softener bleach stain remover Dispenser A for dosing liquid detergent not for all models For models with insert for liquid detergent The detergent drawer features an insert which is used as a dosing aid for liquid detergent Do not use insert For gel like detergents and washing powders For programmes with Prewash or Ready in option Position insert for dosing liquid detergent Completely remove detergent drawer p Push insert forwards For models without insert for liquid detergent Dose liquid detergent according to the manufacturer s instructions 10 A Operating elements Display elements Shirts Ga Cotton Down Wear Easy Care Textile Guard m Mixed Fabrics Rapid 15 Delicates Silk Dark Wash Gi i ih Wool Curtains Low Spin Lingerie Others ecoPerfect O speedPerfect O Temperature Spin Finish in El Options Basic Settings 3 sec a All buttons are sensitive they only need to be touched gently Switch on and off the appliance Press the main switch button Select a programme Rotating the in either direction is possible Programme Overview refer to Page 24 Change programme settings of the selected programme and select programme options2. Select Temperature Spin Finish in buttons and change Page 17 Page 29 Select ecoPerfect or speedPerfect button Page 17 Page 29 Select ASR Stain Automatic 1 button for stain selection Overview of all stains Page 31 Select El Options button for additional programme options Overview of all options Page 29 Start wash programme Select Start Reload button to start interrupt and cancel the programme e g reload washing Change appliance settings Hold down Basic Settings 3 sec button for appliance settings end signal button signal language autom switch off for approx 3 seconds See Overview of al settings Page 33 Display panel for settings and information 11 The main points in brief wy ane 2D A D J o OCI Insert mains plug Open the washing To switch on press Select the Turn the tap on machine door the button programme e g Cotton Dosage 30 09 Please load laundry max 8kg eps wo Sort the washing Insert the washing Do not exceed maximum load Dosage 70 0 Please load laundry max 8kg Open the detergent Dose detergent according to dosing Close the washing drawer recommendation machine door select programme settings options Shirts a Cotton Down Wear es es Easy Care Teste ued ow S Mied Faries NUL Rapid
3. gt Page 38 Supply hose kinked or jammed Safety function active Stop programme Rinse Hold w without final spin selected Can be opened via emergency release only Page 39 Start Reload Pil or Finish in time selected Door closed Childlock active Deactivate Rinse Hold w without final spin selected Clean the drain pump Page 36 Clean outlet pipe and or drainage hose Not a fault water below the visible area spin cycle washing unevenly distributed Distribute small and large items of washing in the drum Less Ironing selected Page 30 Too low speed selected gt Page 24 Nota fault effect of the care product not impaired If required clean insert Page 36 Run Cotton 90 C programme without washing Use standard detergent Appliance aligned Align the appliance Page 56 Appliance feet fixed Secure appliance feet gt Page 56 Transportation safety devices removed Remove transportation protection devices gt Page 50 Nota fault unbalanced load detection system has stopped the Not a fault unbalanced load detection system adjusts imbalance 41 Faults Cause Remedy Display panel indicator lights do z not function while the appliance is running The programme takes longer than usual _ Detergent residue on the washing In the pause status Start Reload gt flashes very quickly and a signal
4. 800 rom ORO 8 US tw i Dark Wash Dark textiles made of cotton and dark easy care textiles Wash textiles inside out max 3 5 kg cold 30 40 C 0 800 1200 rom ORO 8228 tw Pf at 2 0 600 800 rom Rapid 15 Extra short programme approx 15 minutes suitable for lightly soiled washing as a small amounts of laundry max 2 kg cold 30 40 C 0 800 1200 rom wv T 25 J bA ww The presettings of the pro Y grammes are highlighted in bold Programme Type of washing Options information Textile Guard max 1 kg Washing followed by impregnation of _ o weatherproof and outdoor clothing with O San membrane coating and water resistant 0 800 rom textiles QG REAT i use special detergents suitable for machine wash Dosage according to manufacturer s instructions Pour into dispenser II special detergent and textile guard agent max 170 ml into dispenser amp i the laundry must not be treated with fabric softener i Betore washing remove all fabric softener residue from detergent drawer all dispensers Down Wear max 2 kg o Machine washable textiles filled with cold 40 60 C down pillows blankets or duvets O 1200 rom Q 0 R S i wash large items individually Use mild detergent Meter detergent sparingly al Shirts Blouses max 2 kg Non
5. on off cle and deactivated end signal Especially suitable for washing at night Residual moisture of the washing slightly in creased 30 B Anti stain system General information about stains The treatment of two stains explained in the following example 3 blood Q egg A total of 16 different stains can be selected The washing machine adjusts the washing temperature drum movement and soaking time specific to the type of stain Hot or cold water gentle or intensive washing control and long or short soaking provide the wash programme with a special sequence for each type of stain The result stains are treated optimally Blood is first dissolved in cold water then the selected wash programme starts Egg particles are removed by soaking in the lukewarm water bath selecting a wash cycle with a high water level and running additional rinse cycles For the other stains we have developed comparable solutions in intensive studies Selectable treatment of stains 3 baby food blood Q egg strawberry 8 soil sand orange 8 dirty socks W grass red wine grease oil coffee chocolate amp tea lt cosmetics sweat tomatoes 31 Consumption values Programme Load Energy Water Programme consumption duration Cotton 30 C 8 kg 0 38 kWh 57 2 21 h Cotton 40 C 8 kg 0 97 kWh 57 2 31 h Cotton 60 C 8 kg 1 31 k
6. risk of rust Leave detergent drawer and door open so that residual water can evaporate Before switching the machine off Always remove the washing Otherwise the load display may malfunction Always wait until the programme ends as the appliance could still be locked Then switch the appliance on and wait for the unlocking device Press the button Appliance is switched off Turn off the water tap Not required for Aqua Stop models Page 64 23 E7 Programme overview HAS Wap The presettings of the pro grammes are highlighted in bold Programme Type of washing Options information Name of the programme Brief explanation of the programme and for which textiles it is suitable max load selectable temperature as C selectable spin speeds in rom the max spin speed depends on the model possible programme options for the Less Ironing programme option possible spin speeds in rom Cotton max 8 kg 5 kg Hard wearing textiles heat resistant cold 60 90 C textiles made of cotton or linen m O 1400 1600 rom A load for speedPerfect ORAO at 0 800 rom Easy Care max 3 5 kg Textiles made of synthetic materials or cold 40 60 C blended fabrics 0 1200 rom QO 828 tu Pf at 0 600 800 rom Mixed Fabric max 3 5 kg Mixed load consisting of textiles made of cold 40 C cotton and synthe
7. washing may cause an unbalanced load Page 34 Do not load washing until the main menu for the saved programme is displayed after the Siemens logo The load screen is indicated when the door is opened or when the amount of washing is changed The load bar progresses as the washing machine is loaded the max load is exceeded the bar flashes Do not exceed indicated max load Overfilling reduces the washing result and encourages creasing 4 Add detergent and fabric care product 1 Pull out the detergent drawer 2 Dosing in dispenser according to Dosage recommendation on the display panel e g for Cotton Dosage 70 Please load laundry max 8kg Depending on the amount of washing in the washing machine a dosing recommendation is indicated on the display panel Soiling Water hardness ask your water supply company Manufacturers instructions When dosing all detergents cleaning aids cleaning products and cleaning agents always follow the manufacturer s instructions Dilute viscous fabric softener and fabric conditioner with water Prevents blockage of the overflow 5 Changing the settings of the selected programme Take care not to trap any items of clothing between the loading door and rubber seal Close the door 60 c 14006 2 31h The main menu for the selected programme is indicated again on the display panel You can use the displayed presetting
8. cold drinking water only Do not connect to the mixer tap of an unpressurised hot water apparatus Use only the supplied inlet hose or one purchased from an authorised specialist outlet not a used one Ifin doubt have the appliance connected by a technician Water inlet hose Water inlet hose do not kink crush modify or sever strength is no longer guaranteed Optimum water pressure in the mains 100 1000 kPa 1 10 bar m When the tap is turned on the water flow is at least 8 l min m lf the water pressure is higher install a pressure reducing valve 1 Connect the water supply hose A Warning Threads for screw connections may be damaged If the screw connections are tightened too tightly using a tool pliers the threads may be damaged Tighten plastic screw fittings by hand only 52 to the tap 4 26 4 mm late e A Boe Aqua Stop and Aqua Secure Standard on the appliance for Standard and Aqua Secure models 2 Carefully turn on the tap and check that the connection points are not leaking Screw connection is under water pipe pressure Water drainage hose Do not kink or protract the the water supply hose Height difference between the placement area and drainage point O maximum 100 cm Drainage into a wash basin A Warning Water damage possible If the attached drainage hose slips out of the washbasin due to high water pressure when draining the w
9. end of the pro gramme can be preselected in h steps up to maxi mum 24h When the programme has started the preselected time is displayed e g for 8h and counts down until the wash programme starts Then the programme du ration is displayed e g 2 30h When the programme has started the preselected time can be changed as follows 1 Select Start Reload Pl 2 Select Finish in button and change Ready in time 3 Select Start Reload pl suit ecoPerfect For saving energy ecoPerfect A speedPerfect For a shorter wash time ASR Stain For washing stained laundry issant Automatic 29 Press E Options button to select Notes Pre wash For heavily soiled washing on off Pour detergent into dispensers I and Il Less Ironing Reduces creasing by special spin sequence followed on off by fluffing and reduced spin speed Residual moisture of the washing slightly in creased Extra rinse Additional rinse cycles depending on the pro ey 1 Rinse 2 wy 2 Rinses 3 w 3 Rinses gramme prolonged programme duration Recommended application for particularly sensi tive skin or and in areas with very soft water 0G OG Water Plus Increased water level more gentle treatment of the on off washing Rinse Hold The washing remains in the water after the last rinse on off cycle End the programme Page 22 Silent Wash Reduced noise values by special wash and spin cy
10. iron shirts Blouses made of cotton _ an _ o linen synthetics fibres or blended fabrics op eos For the Less Ironing option shirts 0 800 rom blouses are given a short spin only hang Q R UA S Ao up dripping wet Self smoothing effect at 0 400 rom i wash shirts blouses made of delicates silk in Delicates silk programme 26 More programmes HAY Wap The presettings of the pro grammes are highlighted in bold Programme Type of washing Outdoor Weatherproof and outdoor clothing with a membrane coating and water resistant textiles Use special detergents suitable for machine wash Pour detergent into dis penser Il according to manufacturer s specifications The laundry must not be treated with fabric softener Before washing remove all fabric softener residue from detergent drawer all dispensers Options information max 2 kg cold 30 40 C O 800 rom Q 0 8 2c tw at 0 600 rom Rinsing Extra rinse with spin 0 1200 1600 rom 4a 40 7 at 0 800 rom Spin Extra spin with selectable spin speed 0 1200 1600 rom 2 9 at 0 800 rom Drain the rinsing water when Rinse stop wy without final spin is actuated 27 Starching The washing should not be treated with fabric softener Liquid starch can be used
11. mains plug must be accessible at all times 58 Before the 1st washing The washing machine was inspected thoroughly before leaving the factory To remove any water left over from testing procedures the first washing cycle should be carried out without laundry in the machine The washing machine must have been installed and connected properly See chapter Installing gt Page 56 1 Check the machine Never switch on a damaged machine Inform your customer service Page 43 Remove protective film from the fascia Insert mains plug Turn the tap on Switch on the appliance Close the washing machine door Do not load any washing Select the Cotton programme Select the temperature 90 C Open the detergent drawer 10 Pour approx 1 litre of water 1 pt into dispenser Il 1 Add standard detergent to dispenser II according to manufacturer s instructions for light soiling wp MNOouPP WD _ To prevent frothing use only half the recommended amount of detergent Do not use any standard or mild detergents 12 Close the detergent drawer 13 Select Start Reload Pl 14 When the programme ends switch off the appliance Your washing machine is now ready for use 59 Transportation e g if moving house Preparatory work 1 Turn off the tap 2 Release the water pressure in the supply hose Maintenance Filter in the water inlet hose Page 38 3 Drain any residual detergent
12. solution Maintenance Drain pump blocked Page 36 4 Isolate the washing machine from the power supply 5 Remove the hoses Installing transportation protection devices 1 Remove covers and keep in a safe place L If required use a screwdriver 2 Insert all 4 sleeves Clamp mains cable on the holders Insert and tighten the bolts Before switching on the appliance Remove the transportation protection devices gt Page 50 To prevent unused detergent from flowing into the outlet during the next wash Pour 1 litre of water into dispenser Il and start the Drain programme 60 Index Alignment 56 Anti stain system 31 Basic Settings 3 sec 11 Cancelling the programme 21 Care 35 Drum 35 Machine housing Control panel 35 Changing the programme 21 Childlock 20 Descaling 36 Detergent drawer 10 Discolouring 28 Display panel 11 ecoPerfect 11 17 29 Electrical connection 57 Emergency lock release 39 Fascia 11 Faults what to do 41 Getting to know your Hints and tips 8 Information on the display panel 40 Inserting the laundry 17 Insert the laundry 14 Insert the washing Aqua Sensor 34 ASR Stain Automatic 11 18 29 Cleaning the detergent drawer 36 the filter 38 the siphon 37 Connecting the water 52 Water drainage 53 Water supply 52 Consumption values 32 Customer service 43 Dosing recommendation 34 Drain pump blocked 36 Drum
13. wobble 3 Tighten the lock nut against the housing Grip the foot and do not adjust the height The lock nuts on all four appliance feet must be screwed tightly against the housing Loud noise formation intense vibrations and wandering may be due to incorrect alignment 56 Electrical connection Electrical safety A Warning Danger of death from electric shock Danger of death if live parts are touched Never pull out the mains plug by tugging the power cord Insert pull out the mains plug with dry hands only Never pull out the mains plug during operation Connect the washing machine to an alternating current via a correctly installed earthed socket only The mains voltage and voltage specifications on the washing machine appliance rating plate must match Connected load as well as required fuse are indicated on the appliance rating plate Ensure that Mains plug and socket match fit Cable cross section is adequate Earthing system has been installed correctly A damaged power cord may be replaced by an electrician only A replacement mains cable can be obtained from customer service Do not use multiple plugs couplings or extension cables 57 lf a residual current operated circuit breaker is used use only a type which features this symbol X Only this symbol guarantees compliance with currently valid regulations The
14. 15 s Delicates Silk J m N l Start Reload Pl Lingerie a Others 2 If required change programme settings of the selected programme and Select Start Reload Pl 2 D Finished remove washing ay End of the programme For switching the machine on press the button Turn off the mains supply for models without Aqua Stop Before each washing i 1 Preparing the washing Sorting the washing according to pM T Install and connect washing machine properly Refer to Page 46 Before the 1st wash wash once without any washing Page 59 Type of fabric fibre Colour Soiling Follow manufacturer s care information Care label specifications Cottons 95 C 90 C Coloureds 60 C 40 C 30 C Easy Care 60 C 40 C 30 C Delicates 40 C 30 C W Hand and machine washable silk and woollens cold 40 C 30 C 4 Do not wash laundry in the washing machine Protecting the washing and the machine i When dosing all detergents cleaning aids cleaning products and cleaning agents always follow the manufacturer s instructions Keep detergents and agents for the pretreatment of washing e g stain remover prewash sprays away from the surfaces of the washing machine Using a damp cloth immediately remove any fine spray residue and other residue droplets Empty pockets Remove metal parts paper clips etc Wash deli
15. Some programme sequence steps explained m Load adjust active Page 34 60 C 14006 Load adjust active Ww m Prewash wash rinse spin drain are displayed during the wash cycle E Extra rinse foam Page 22 m Other displays gt Page 40 During washing m Childlock To prevent the set functions of the washing machine from being accidentally changed the childproof lock can be activated Activate deactivate press Finish in for approx 5 seconds Childlock has been activated Display panel goes back to the Main menu after approx 3 seconds If the programme selector is adjusted or a button is selected while the childproof lock is active the symbol flashes briefly 20 Topping up washing When the programme has started washing can be reloaded or taken out as required Select Start Reload pul IN 14006 Reload is possible Nw If there is a high water level high temperature or if the drum is rotating the washing machine door remains locked for reasons of safety and reload is not possible Follow the information on the display panel To continue the programme select the Start Reload pil button The washing machine door is locked and the programme continues automatically Load display is not active during relosding Do not leave washing machine door open for a prolonged period water could run out of the washing Changing the programme sequence if you ha
16. Wh 57 2 31 h Cotton 90 C 8 kg 2 40 kWh 68 2 21 h Easy Care 40 C 3 5kg 0 55 kWh 41 1 35 h Mixed Fabrics 3 5 kg 0 58 kWh 37 0 53 h 40 C Delicates Silk 2kg 0 14 kWh 34 0 43 h 30 C Wool 30 C 2kg 0 19 kWh 39 0 40 h Programme setting for tests according to currently valid European standard EN60456 Information about comparability tests To test the test programmes wash indicated load size at maximum spin speed Programme Additonal func Load Annual energy Annual water tion consumption consumption Cotton 40 60 C ecoPerfect 8 4 kg 189 kWh 10500 Programme setting for testing and energy labelling according to directive 2010 30 EU with cold water 15 C The values may deviate from the stated values depending on water pressure and hard ness room temperature type and amount of laundry detergents used fluctuations in the mains voltage and selected additional functions 32 a Appliance settings By pressing the Basic Settings 3 sec buttons appliance settings can be changed e g button signal Simultaneously hold down Basic Settings 3 sec buttons for Lo approx 3 seconds Basic Settings 3 sec language end signal button signal Ww m If the buttons are held down the settings automatically run through Select Setting with the two left buttons E Select displayed value with the two right buttons selection acknowledged by a tick m Wait or hold down Basi
17. ad The indicated refers to the recommendation of the detergent manufacturer By observing the recommended dosage you will protect the environment and reduce your household costs Unbalanced load detection system The automatic unbalanced load detection system spins the laundry several times to ensure even distribution For reasons of safety the speed is reduced or does not perform a spin cycle if the washing is very unevenly distributed Distribute small and large items of washing in the drum Faults what to do Page 41 34 Care and maintenance A Warning Danger of death from electric shock Danger of death if live parts are touched Switch off the appliance Pull out the mains plug A Caution Fire and explosion hazard If solvent cleaning agents e g petroleum ether are used in the washing machine components may be damaged and toxic fumes generated Do not use solvent based cleaning agents A Caution Washing machine may be damaged If solvent cleaning agents e g petroleum ether are used on the washing machine the surfaces may be damaged Do not use solvent based cleaning agents Machine housing Control panel Remove detergent residue immediately Wipe with a soft damp cloth Do not clean the appliance with a water jet Drum Use chlorine free cleaning agent not steel wool 35 Descaling Not required if detergent dosed correctly However if this does occur follow the instruction
18. ashing machine leaking water may cause damage Secure the drainage hose to prevent it from slipping out of the sink 53 A Caution The appliance may be damaged If the end of the drainage hose is immersed in the drained water water may be drawn back into the appliance The plug must not be in the plug hole When the water is being pumped out of the washing machine check that the water drains away quickly enough The end of the drainage hose must not be immersed in the drained water Drainage into a siphon A Warning Water damage possible If the drainage hose slips off the siphon connection due to high water pressure when draining the washing machine leaking water may cause damage Connection point must be secured with hose clip 24 40 mm specialist outlet Connecting 54 Drainage into a plastic pipe with rubber sleeve or into a gully A Warning Water damage possible If the drainage hose slips off the plastic pipe due to high water pressure when draining the washing machine leaking water may cause damage Secure the drainage hose to prevent it from slipping out of the sink BR Connectin Ys a 55 Alignment 1 Loosen lock nut in a clockwise direction with a wrench 2 Check alignment of the washing machine with a spirit level and if required correct Adjust the height by rotating the foot All four feet must be firmly on the floor The washing machine must not
19. blocked Clean the drainage hose on the siphon Page 37 Water level or temperature is too high Select Start Reload Pll to continue the programme Water level or temperature is too high Select Start Reload to continue the programme not applicable without Aqua Stop Water in the base pan appliance leaking Call customer service Page 43 Appliance automatically switches off after seconds if it is not operated for a prolonged period In order to cancel the programme press any button Page 33 To protect the wastewater pipes the hot detergent solution is cooled before being drained Switch off appliance wait 5 seconds and switch on again If the display is indicated again call customer service gt Page 43 40 Faults what to do Faults Cause Remedy Water is running out Water not flowing in Detergent not washed in Washing machine door cannot be opened Program me does not start Detergent solution is not drained Water not visible in the drum Spin result not satisfactory Washing wet too damp Spin cycle actuated several times Residual water inthe dispenser for care product Odour formation in the washing machine Loud noise formation vibrations and wandering during spin cycle Correctly attach replace drainage hose Tighten screw fitting on the supply hose Start Reload pil not selected Tap not open Filter blocked Clean the filter
20. c Settings 3 sec buttons again Settings are retained after appliance is switched off Settings Set values Notes end signal off quiet medium Adjust volume of the end signal loud very loud button signal off quiet medium Adjust volume of the button signals loud very loud Auto power in 15 30 60 min The appliance automatically switches off after off of the ap never min 0 kWh energy consumption to switch pliance on press main switch button language German Change displayed language GB English 33 Sensors Your washing machine is so intelligent Load adjust Depending on the type of textile and load the load adjust optimally adjusts the water consumption in each programme Aqua Sensor depending on model During the rinse cycle the Aqua sensor checks the degree of turbidity turbidity is caused by dirt and detergent residue of the rinsing water The duration and the number of rinse cycles depend on the turbidity of the water Load sensor Load display The load sensor detects the load level in the washing machine when the door is open This is indicated by a progressing bar on the display panel To ensure that the load sensor measures all the laundry the drum must be empty before the washing machine is switched on Dosing recommendation The dosing recommendation indicates a recommended detergent dosage as a depending on the selected programme and the detected lo
21. cates in the net bag tights underwired bras Close zips button up covers Brush sand out of pockets and collars Remove curtain fittings or include in the net bag Wash new items separately 2 Preparing the appliance Insert mains plug if A Turn on water tap 3 Selecting a programme and puting the washing in the drum Open the washing machine door 2 Check whether the drum has been completely emptied If required empty Otherwise the load display may malfunction Page 34 Press the button The appliance is switched on The Siemens logo is indicated on the display panel and all programme indicator lamps are lit Then always the Cotton programme preset at the factory is displayed Displays for the Cotton programme N N 60 c 14006 2 31h su zg ANY ww ww ww The indicator lamp is lit on the programme selector and the main menu for the selected programme is indicated on the display panel For appliances with drum light After switching on the appliance after opening and closing the washing machine door as well as after starting the programme the drum is lit The light goes out automatically 4 Select a programme You can use the saved programme or select another programme Programme Overview refer to Page 24 or select other programmes see Others programmes and choose one programme as follows other programmes selected using Others and c
22. en Instruction Manual and Installation Instructions WM16Y790GB WM14Y790GB Washing machine SIEMENS www siemens home com Your new washing machine You have chosen a premium washing machine made by Siemens Thanks to its innovative technologies the washing machine is distinguished by its perfect washing performance and its economic consumption of water and energy Please take a couple of minutes to read and become familiar with the advantages of your washing machine To meet the high quality demands of the Siemens brand each washing machine which leaves our factory is inspected thoroughly to ensure that it functions properly and is in perfect condition Further information on our products accessories spare parts and services can be found at www siemens home com or contact our customer service centres If the instructions for use and assembly describe various models reference is made to the differences at the appropriate places Explanation of the symbols A Warning This combination of symbol and signal word indicates a potentially dangerous situation which may result in death or serious injuries unless it is avoided A Caution This combination of symbol and signal word indicates a potentially dangerous situation which may result in slight or minor injuries or damage to property and the environment i Instructions on how best to use the appliance as well as other useful information Con
23. en joist ceiling If possible install the washing machine in a corner Screw a water resistant wooden panel min 30 mm thick to the floor Warning Danger of death from electric shock Danger of death if live parts are touched The appliance cover plate must not be removed 60cm cavity width required Install washing machine only under a continuous worktop connected firmly to the adjacent cupboards 49 Remove transportation protection devices A Caution Washing machine may be damaged Transit bolts which have not been removed may damage e g the drum while the washing machine is running Before using the appliance for the first time remove the 4 transportation protection devices completely and keep in a safe place A Caution Washing machine may be damaged To prevent damage in transit when transporting the washing machine subsequently always re install the transit bolts prior to transportation gt Page 60 Keep screw and sleeve screwed together 50 Lock covers firmly by pressing on the locking hook 7 Insert hose holder 8 Secure hoses in the hose holders 51 b Connecting the water A Warning Danger of death from electric shock Danger of death if live parts are touched Do not immerse Aqua Stop safety device in water contains an electric valve To prevent leakage or water damage follow the instructions in this chapter Operate the washing machine with
24. equired lock disengaged service flap beforehand To prevent unused detergent from flowing into the outlet during the next wash Pour 1 litre of water into dispenser Il and start the Drain programme Drainage hose on the siphon blocked 1 Switch off the appliance Pull out the mains plug Note Residual water may run out 2 Loosen hose clip carefully remove drainage hose 3 Clean drainage hose and siphon spigot 4 Re attach drainage hose and secure connection point with hose clip 37 Filter blocked in water inlet hose First release water pressure in the supply hose 1 2 3 Turn off the tap Select any programme except Spin Drain Select Start Reload pil Leave programme for approx 40 seconds Press the button Appliance is switched off Pull out the mains plug Clean the filter Disconnect the hose from the water tap Clean filter with small brush and or for standard and Aqua Secure models Remove hose from the rear of the appliance Take out filter with pliers and clean Connect the hose and check for leaks 38 Emergency lock release e g if power failure occurs The programme continues running when the power supply is restored If the washing is still to be removed the door can be opened as described below A Warning Danger of scalding Wash liquor and washing may be hot If touched there is a risk of scalding If required leave to cool down A Caution Dang
25. er when reaching into gripping the rotating drum If you reach into the rotating drum you may injure your hands Do not grip the rotating drum Wait until the drum stops rotating A Caution Water damage possible Leaking water may cause damage Do not open the door if you can still see water through the glass 1 Switch off the appliance Pull out the mains plug 2 Drain the water gt Page 36 3 Pull down emergency release with a tool and release Door can then be opened 39 Information on the display panel DI EN Cause Remedy The door cannot be locked please open the door again then close it and select start pause Please open tap Please clean pump Pause Reload is not possible Door cannot be unlocked Water level or temperature is too high aquaStop has been activated Please call customer service Auto power off in seconds Cooling down the detergent solution Other displays Error E XXX Washing may be caught Please open and close washing machine door again and select Start Reload pil If required shut washing machine door or remove washing and shut again If required switch appliance off and on again set programme and make individual settings start programme Turn on tap fully Supply hose kinked jammed Water pressure too low Clean the filter Page 38 Drain pump blocked Clean the drain pump gt Page 36 The water drainage pipe drain hose is
26. hoose e g Outdoor 30 C 800 1 04h Drain Additional programms Outdoor Muy fa AN Ny Rinse Freshen Up Main menu Select programme using the buttons under the arrows The selection is acknowledged by a tick Wait or back by pressing Main menu button selected programme is indicated on the display panel 30 c 8006 1 04n To change the programme select button under the black highlighted programme and change programme Insert the washing Dosage 30 Please load laundry max 8kg The load screen for the selected programme e g for Cottons is indicated on the display panel The load screen is indicated when the door is opened or when the amount of washing is changed Unfold and load presorted items of washing Mix large and small items Washing items of different size distribute themselves better during the spin cycle Individual items of washing may cause imbalances Do not load washing until the main menu for the saved programme is displayed after the Siemens logo The load bar progresses as the washing machine is loaded the max load is exceeded the bar flashes Do not exceed indicated max load Overfilling reduces the washing result and encourages creasing Unfold and load presorted items of washing Mix large and small items Washing items of different size distribute themselves better during the spin cycle Individual items of
27. ies Do not lift the washing machine by its projecting parts 47 A Caution Risk of stumbling If the hoses and power cord are installed incorrectly there is a risk of tripping and injury Lay hoses and cables in such a way that there is no risk of stumbling A Caution Washing machine may be damaged Frozen hoses may tear burst Do not install the washing machine in an area where there is a risk of frost or outdoors If the washing machine Is raised by protruding components e g washing machine door the components may break off and the washing machine may be damaged Do not lift the washing machine by its projecting parts In addition to the safety information listed here the local water and electricity supplier may have special requirements lf in doubt have the appliance connected by a technician Installation area Stability is important to prevent the washing machine from wandering The installation area must be firm and level Soft floors floor coverings are not suitable 48 Installing the appliance on a base or on a wooden joist ceiling A Warning Appliance installed under between kitchen units A Washing machine may be damaged The washing machine may wander during the spin cycle and topple fall off the base Always secure the washing machine feet with fixing brackets Holding brackets order no WMZ 2200 WX 9756 CZ 110600 Z 7080X0 If installing on a wood
28. in all wash programmes Pour starch into the dispenser according to manufacturer s specifications if required clean beforehand Dyeing Discolouring Soaking Dye in household quantities only Salt may attack stainless steel Observe specifications of the dye manufacturer Do not discolour washing in the washing machine Pour soaking agent detergent into dispenser Il according to the manufacturer s instructions Set programme selector to Cotton 30 C and select Start Reload pl After approx 10 minutes select Start Reload pl After the required soaking time reselect Start Reload pul if the programme is to be continued or change the programme Insert washing of the same colour No additional detergent required the soaking solution is used for washing 28 Programme settings options Depending on the programme you can use the programme options to adjust the washing process even more efficiently to your items of washing Are active without acknowledgement Not retained after appliance is switched off Can be selected or deselected or changed depending on the programme progress Buttons Notes Temperature Before and during the programme the presettings can be changed for as long as the arrows are dis played Spi Maximum spin speed depends on the programme pin spin and model Finish in Delays the Finished in time end of programme LT it Before the programme starts the
29. light 14 Dyeing 28 End of the programme 22 Extra rinse 30 Finish in 11 29 appliance 9 Hose and cable lengths 45 the laundry 15 Installation 46 Installing transportation protection devices 60 Intended use 4 61 Less Ironing 30 Load adjust 34 Maintenance 35 Old appliance 8 Packaging 8 Pre wash 30 Programme overview 24 Programme selector 11 Programme sequence Quick reference Ready in 17 Safety instructions 5 Selecting the programme 15 Settings 3 sec 33 Silent Wash 30 Soaking 28 Sorting the washing 13 18 Technical specifications 45 Temperature 11 17 29 Topping up Unbalanced load detection system 34 Water Plus 30 Load sensor Load display 34 Options 11 18 29 steps 20 Programme setting 17 18 Programme settings 29 Protection of the environment 8 instructions 12 Rinse Hold 22 30 speedPerfect 11 18 29 Spin 11 17 29 Standard accessories 44 Starching 28 Start Reload 11 Starting the programme 19 washing 21 Transport bolts 50 Unloading the laundry 23 62 Aqua Stop warranty For appliances with Aqua Stop only In addition to warranty claims against the seller based on the contract of sale and in addition to our appliance warranty we shall pay damages under the following conditions 1 If water damage is caused by a fault in o
30. ng machine Select the programme Select a stain type depending on the selected programme Select ASR Stain Automatic button and select e g grass 60 C 2 31h Vv soil sand W Stains Y grass V coffee Main menu Ms a Select deselect stain using displayed buttons Stain option is immediately active and is indicated on the display panel Wait or back by pressing Main menu or ASR Stain Automatic 1 button m amp Options Overview of all options Page 29 Select B Options and e g amp Water Plus buttons 60 C Options Extra rinse Water Plus Ww Select option by pressing the two buttons displayed on the left Select deselect option by pressing the two buttons displayed on the right The selected options are immediately active In the case of multi level settings keep touching the buttons to run through the settings automatically Wait or back to the main menu by pressing E Options button 18 6 Starting the programme E Select Start Reload pil The indicator light is on Start Reload Pll Washing During the wash cycle the programme progress is indicated by a bar on the display panel The bar progresses in the course of the wash cycle and provides information about the current programme progress The arrows are switched on and off according to the programme progress They indicate the programme settings options which can be changed added as the programme progresses
31. oducts may cause intoxication if consumed or eye and skin irritation if touched Keep detergents and care products out of the reach of children A Warning Risk of explosion Items of washing pretreated with solvent detergents e g stain remover petroleum ether may cause an explosion when the washing machine has been loaded Before hand thoroughly rinse items of washing by hand A Caution Danger of scalding When washing at high temperatures you may be scalded if you touch the hot wash liquor e g if draining hot wash liquor into a washbasin or if draining the washing machine in an emergency Allow detergent solution to cool down A Caution Risk of damaging appliance Cover plate may break Do not climb on the washing machine Opened washing machine door may break off or washing machine may overturn Do not lean on the open washing machine door A Caution Danger when reaching into gripping the rotating drum If you reach into the rotating drum you may injure your hands Do not grip the rotating drum Wait until the drum stops rotating A Caution Risk of coming into contact with liquid detergents care products If the detergent drawer is opened while the washing machine is running detergent care product may spray out Caution when opening the detergent drawer In case of eye skin contact rinse thoroughly If accidentally swallowed seek medical advice Protection of the envir
32. onment Packaging Old appliance DEA Dispose of packaging in an environmentally friendly manner This appliance has been identified in accordance with the European Directive 2002 96 EG on Waste Electrical and Electronic Equipment WEEE The Directive specifies the framework for an EU wide valid return and recycling of waste appliances Hints and tips Utilise the maximum amount of washing for the particular programme Wash normally soiled washing without Pre wash Instead of Cotton 90 C programme select Cotton 60 C and ecoPerfect button Comparable cleaning result with significantly lower energy consumption Energy saving mode The display panel light goes out after several minutes Start Reload pli flashes To activate the light select any button The energy saving mode is not activated if a programme is running Automatic switch off If the appliance is not operated for a prolonged period it automatically switches off before the programme starts and when the programme has ended to save energy Switch on by pressing main switch button If the washing is then dried in the tumble dryer select spin speed according to the instructions of the dryer manufacturer Getting to know your appliance i Operating Detergent drawer SSS elements Display o eae ens Drum light depending on model iS Opening and closing the door Service flap ia Detergent drawer SIEMENS
33. rts 43 E Standard accessories je nach Modell Aquastop Standard Aqua Secure AHIT y a a Netzleitung p wa wy I Gebrauchs und Aufstell y anleitung o__ _ _ Wasserablauf Wasserzulauf A R D Pa a w Op Abdeckungen mit Sa 2 _Schlauchhaltern kummer SO o __ X Op Schraubenschl ssel y oA T O Also required for connection of the water drainage hose to a siphon 1 hose clip 24 40 mm DIY store is also required for connection to a siphon Connecting the water Page 54 zum Fixieren des Wasserablaufschlauchs Useful tools E Spirit level for alignment m Socket wrench size 13 for loosening the transportation protection devices Page 50 and size 17 for aligning the appliance feet Page 56 44 Hose and cable lengths depending on model Connection on left side or Connection on right side a O i 7 If the hose holders are used the possible hose lengths are reduced Available from dealer customer service m Extension for Aqua Stop or cold water inlet hose approx 2 50 m Order no WMZ2380 WZ10130 CZ11350 Z7070X0 m Longer supply hose approx 2 20 m for standard model Technical specifications Dimensions 60 x 59 x 85 cm width x depth x height Weight depending on modell 63 83 kg Mains connection Nominal voltage 220 240 V 50 Hz Nominal current 10 A Nominal power 2300 W Water press
34. s of the descaling agent manufacturer Suitable descalers can be purchased on our website or from customer service Page 43 Cleaning the detergent drawer If it contains detergent or fabric softener residue 1 Pull out depress insert take out drawer all the way Take out insert using your finger press insert upwards Clean detergent dispenser and insert with water and a brush and dry Attach insert and lock into position push cylinder onto guide pin Insert detergent drawer Leave detergent drawer open so that residual water can evaporate Drain pump blocked A Warning Danger of scalding Wash liquor is hot when washing at high temperatures You may be scalded if you touch the hot wash liquor Allow detergent solution to cool down Turn the tap off to prevent more water from flowing in and to ensure that it is drained via the pump 1 Switch off the appliance Pull out the mains plug 2 Open service flap 36 3 Take the drainage hose out of the holder 4 Remove sealing cap allow detergent solution to flow out Have a suitable container ready Push up the closing cap and place the drain hose back in its holder Note Residual water may run out 5 Carefully unscrew the pump cover Clean the interior pump cover thread and pump housing fan impeller in the detergent solution pump must rotate Reinsert and screw on pump cover Handle should be vertical Close the service flap If r
35. s or adjust the selected programme optimally to the items of washing by changing the presettings or selecting additional settings options m Changing the Temperature Spin Ready in Refer to Page 29 e g selecting and changing the Temperature N N 70 60 c 14006 2 31h Temperature 50 Ww Ww Ww The arrows on the display panel indicate which buttons are used to change the settings The settings are active without acknowledgement and are displayed in the main menu Ifthe buttons are held down the set values automatically run through The respective programme duration is displayed by selecting the programme The programme duration is adjusted while the programme is running if the programme duration requires changing e g due to changes in the programme settings options foam detection unbalanced load detection the load or soiling ecoPerfect Pre for saving energy with a comparable washing effect to the SUZ standard programme When selected the display lamp is lit ecoPerfect Q NUIT speedPerfect M ASR Stain Automatic T i E speedPerfect U for a shorter wash time with a comparable washing effect to the standard programme Observe maximum load Page 24 When selected the display lamp is lit ASR Stain Automatic 1 Overview of all stains Page 31 Do not let stains dry Remove solid substances beforehand Arrange items of washing as usual and load washi
36. sounds Power failure Fuse tripped Switch on replace fuse If the fault occurs repeatedly call customer service Page 43 Not a fault unbalanced load detection system adjusts imbalance by repeatedly distributing the washing Not a fault foam detection system active several rinse cycles are switched on Occasionally phosphate free detergents contain water insoluble residue Select Rinsing or brush the laundry after washing Water level too high Washing cannot be reloaded Immediately close washing machine door Select Start Reload Pll to continue the programme If a fault cannot be rectified switching the machine on and off or a repair is required Switch off the appliance and pull out the mains plug Turn off the tap and call customer service Page 43 42 Customer service If you cannot rectify the fault yourself Faults what to do Page 41 please contact our customer service We will always finds a suitable solution to avoid unnecessary visits by technicians Please give customer service the product number E Nr and the production number FD of the appliance These instructions can be washing machine door open service flap and Product number Production number rear of the appliance depending on model Rely on the competence of the manufacturer Contact us You can therefore be sure that the repair is carried out by trained service technicians who carry original spare pa
37. tents Before washing Intended use Safety instructions Protection of the environment Getting to know your appliance Detergent drawer Operating elements Display elements The main points in brief Operating the appliance Before each washing Washing After washing Programme overview Programme settings options Anti stain system Consumption values Appliance settings Sensors Your washing machine is so intelligent Cleaning and maintenance Care and maintenance Emergency lock release e g if power failure occurs Information on the display panel Faults what to do Customer service Installing the appliance Index Standard accessories Installation Remove transportation protection devices Connecting the water Alignment Electrical connection Before the 1st washing Transportation e g if moving house Intended use For use in the household only The washing machine is suitable for washing machine washable textiles and hand washable wool in wash liquor The washing machine is suitable to be operated with cold drinking water and commercially available detergents and care products which are suitable for use in washing machines When dosing all detergents cleaning aids cleaning products and cleaning agents always follow the manufacturer s instructions The washing machine may be operated by children from 8 years of age by persons who have limited physical sensory or mental abilities and b
38. tics 0 1400 1600 rom OM ORLAU ESA A at 0 600 800 rom Delicates Silk max 2 kg For delicate washable textiles e g made _ 3n _ o of silk satin synthetic fibres or blended aa fabrics e g silk blouses silk scarf 0 600 800 rom I 4 Li For machine wash use detergent QO BU addo suitable for delicates and or silk at 8 0 600 rom 24 WAS Wath Programme Type of washing The presettings of the pro grammes are highlighted in bold Options information Wool Hand or machine washable wool or rich wool textiles Especially gentle wash programme to prevent shrinkage longer programme pauses textiles rest in wash liquor Li wool is of animal origin e g angora alpaca lama sheep Li For machine wash use detergent suitable for wool max 2 kg cold 30 40 C O 800 rom ww Low Spin Extra spin cycle at reduced speed and with especially gentle spin mechanism 0 800 1200 rom a at 0 600 rom Lingerie max 1 kg For delicate washable underwear e g cold 30 40 C made of velvet lace Lycra silk or satin 0 600 rom OORLAS tu at 2 0 400 rom Curtains 3 5 kg heavy curtains or 25 30 m light curtains i Reducea rinse and final spin cycle i For machine wash use detergent suitable for curtains max 3 5 kg cold 30 40 C O 400
39. ur water safety system we shall make reparation for the damage with respect to private users 2 The liability warranty applies to the service life of the appliance 3 Aclaim can only be made under the warranty if the appliance and Aqua Stop have been correctly installed and connected according to our instructions this also includes a correctly installed Aqua Stop extension original accessory 4 Our guarantee does not apply to defective cables hoses or to fittings up to the connection on the tap 5 Appliances which feature Aqua Stop can be left unattended during operation and it is not necessary to turn off the tap afterwards 6 The tap should only be turned off if you are away for a prolonged period e g several weeks holiday To book an engineer visit and product advice GB 0844 8928999 Calls from a BT landline will be charged at up to 3 pence per minute IE 01450 2655 Please find the contact data of all countries in the enclosed customer service list Siemens Electrogerdate GmbH Carl Wery Str 34 81739 M nchen Germany 9000742394 9201
40. ure 100 1000 kPa 1 10 bar 45 Installation Humidity in the drum is caused by the final inspection Secure installation A Warning Risk of injury The washing machine is heavy caution take care when lifting it If the washing machine Is raised by protruding components e g washing machine door the components may break off and cause injuries Donot lift the washing machine by its projecting parts A Caution Risk of stumbling If the hoses and power cord are installed improperly there is a risk of tripping and injury Lay hoses and cables in such a way that there is no risk of stumbling 46 A Caution Washing machine may be damaged Frozen hoses may tear burst Do not install the washing machine in an area where there Is a risk of frost or outdoors If the washing machine is raised by protruding components e g washing machine door the components may break off and the washing machine may be damaged Donot lift the washing machine by its projecting parts In addition to the safety information listed here the local water and electricity supplier may have special requirements If in doubt have the appliance connected by a technician A Warning Risk of injury The washing machine is heavy caution take care when lifting it If the washing machine is raised by protruding components e g washing machine door the components may break off and cause injur
41. ve mistakenly started a wrong programme 1 Select Start Reload Pl 2 Select another programme 3 Select Start Reload pil The new programme starts from the beginning Cancelling the programme For programmes at high temperature 1 Select Start Reload pil 2 Cool down washing select Rinse Freshen Up see Others programmes 3 Select Start Reload pil For programmes at low temperature 1 Select Start Reload Pl 2 Select Spin or Drain see Others programmes 3 Select Start Reload Pll 21 E End of programme by Rinse Hold Rinse hold reached Select spin or drain and then start Spin Drain Ww Ww 1 Select Spin If required adjust the spin speed or Drain 2 Select Start Reload Pll End of the programme Finished remove washing is indicated on the display panel Finished remove washing If Foam has been detected is also indicated on the display panel the washing machine has detected too much foam during the wash programme and therefore automatically activates additional rinse cycles to eliminate the foam Dose less detergent in the next wash cycle with the same load 22 After washing Open washing machine door and remove washing 0 Remove the washing O Switch off the device Do not leave any items of washing in the drum In the next wash they may shrink or discolour something else Remove any foreign objects from the drum and the rubber seal
42. y persons who have inadequate experience or knowledge provided they are supervised or have been instructed by a responsible person Keep pets away from the washing machine Read and follow the operating and installation instructions and all other information enclosed with the washing machine Retain documents for subsequent use Safety instructions A Warning Danger of death from electric shock Danger of death if live parts are touched Never pull out the mains plug by tugging the power cord Insert pull out the mains plug with dry hands only A Warning Risk to children Do not leave children unsupervised near the washing machine Children must not play with the washing machine This will prevent children from locking themselves in and suffocating On redundant appliances Pull out the mains plug Sever the power cord and discard together with the plug Destroy the lock on the washing machine door Children must not perform any cleaning or maintenance work without supervision When playing children may become entangled in the packaging film and packaging parts or pull them over their heads and suffocate Keep packaging plastic film and packaging parts out of the reach of children When washing at high temperatures the glass of the washing machine door becomes hot Prevent children from touching the hot washing machine door Detergents and care pr
Download Pdf Manuals
Related Search