Rosewill RC-300E
Contents
1. Click Finish Repeat steps 1 5 one more time For Windows XP Server 2003 LE 2 Insert the Driver CD into the CD ROM drive At the Found New Hardware Wizard select Install the software automatically Recommended then click Next RC 300E User Manual 3 Accept the default entry then click Next 4 Click Finish to complete the driver installation For Windows XP x64 Server 2003 x64 Insert the Driver CD into the CD ROM drive 2 At the Found New Hardware Wizard select Install the software automatically Recommended then click Next 3 Click Finish to complete the driver installation For Windows Vista Vista x64 Insert the Driver CD into the CD ROM drive 2 At the Found New Hardware Wizard select Locate and install driver software recommended 3 Click Next to continue to setup 4 Click Close to complete the driver installation To Verify Windows Driver Installation Click on the Device Manager tab in System Properties which you access from the Windows Control Panel You should see one PCI Express UART Port installed under Ports COM amp LPT item and one PCI Express Multiport Serial Adapter installed under Multi port serial adapters item Thank you for purchasing a quality Rosewill Product Please register your product at www rosewill com for complete warranty information and future support for your product2. e osewill Serial PCI Express Card 1 Port RC 300E User Manual RC 300E User Manual Features and Benefits Features Compliant with PCI Express Base spec 1 1 Compliant with PCI Power Management 1 2 Supports 1 x UART serial port Built in 16C950 compatible UART 128 byte deep transmit receive FIFOs Serial data transfer rate up to 230400bps Bus e PCI Express x1 Connectors e 1 x DB9 male serial connector System Requirements e Windows 2000 XP 2003 32 64 bit Vista 32 64 bit 7 32 64 bit e PCI Express enabled system with an available PCI Express slot Package Contents e 1 x PCle Serial Card 1 Port e 1 x Driver CD e 1 x User s Manual RC 300E User Manual Hardware Installation il 2 3 4 Turn Off the power to your computer Unplug the power cord and remove your computer s cover Remove the slot bracket from an available PCle slot To install the card carefully align the card s bus connector with the selected PCle slot on the motherboard Push the board down firmly Replace the slot bracket s holding screw to secure the card Replace the computer cover and reconnect the power cord Driver Installation For Windows 2000 1 NO 2 8 ND Insert the Driver CD into the CD ROM drive At the Found New Hardware Wizard click Next Select Search for a suitable driver for my device recommended and click Next Check CD ROM drives uncheck the other boxes then click Next Click Next
Download Pdf Manuals
Related Search