Kramer Electronics VP-505 video converter
Contents
1. 4 Connecting the VP 505 i Always switch off the power to each device before connecting it to your VP 505 After connecting your VP 505 connect its power and then switch on the power to each device To connect the VP 505 as illustrated in the example in Figure 2 1 Connect the SDI video source for example a digital camera to the SDI IN BNC connector Connect the SDI OUT BNC connector to the SDI acceptor for example an SDI display Connect the LEFT and RIGHT AUDIO OUT RCA connectors to the audio acceptor for example a stereo audio amplifier Connect the VIDEO CV OUT BNC connector to the composite video acceptor for example a composite video display Connect the VIDEO Y C OUT 4 pin connector to a Y C s Video acceptor for example an s Video recorder Connect the power adapter to the 5V DC power socket and to the mains electricity not shown in the illustration s Video Recorder a Digital Camera Display Amplifier Display Figure 2 Connecting the VP 505 3G HD SDI to Video Scan Converter VP 505 Connecting the VP 505 5 1 5 2 Operating the VP 505 3G HD SDI to Video Scan Converter The VP 505 is operated directly via the front panel buttons see Section 5 1 and via the OSD menu see Section 5 2 Using the Front Panel Buttons During normal operation without the OSD the front panel buttons perform in the following manner e MENU Displays the OSD Main Me2. The Main Menu The following table defines the Main menu parameters and functions Parameter l Function Sets the output resolution size and aspect ratio see Section 5 2 2 SDI AUDIO Selects which embedded audio to output Group 1 Group 2 Group 3 Group 4 Auto Off audio is not outputted Default Auto When set to Auto the unit searches for the lowest Group number which has audio and selects this audio Group FACTORY Resets all parameters to factory defaults RESET INFORMATION Displays current input resolution output resolution and firmware revision AUTO SYNC OFF When on this de activates the output after a few minutes if no input is present When set to Auto the unit searches for the lowest Group number which has audio and selects this audio Group EXIT Exits the Main menu The Display Submenu The Display submenu sets the display output resolution size and aspect ratio The following table defines the display output parameters Parameter Parameters Factory Default OUTPUT PAL 768x567i NTSC 720x480i NTSC SIZE Sets the output size aspect ratio full panscan letterbox Full under 2 under 1 overscan EXIT Exits the display menu The Color Submenu The Color submenu sets the display output color parameters The following table defines the color output parameters Parameter Function Value Factory Range Default fR Sets the output red value 0 255 Sets the output green value 0 255 B Sets the output
3. or malfunction resulting from the installation or removal of this product from any installation any unauthorized tampering with this product any repairs attempted by anyone unauthorized by Kramer Electronics to make such repairs or any other cause which does not relate directly to a defect in materials and or workmanship of this product This limited warranty does not cover cartons equipment enclosures cables or accessories used in conjunction with this product Without limiting any other exclusion herein Kramer Electronics does not warrant that the product covered hereby including without limitation the technology and or integrated circuit s included in the product will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used How Long Does this Coverage Last Seven years as of this printing please check our Web site for the most current and accurate warranty information Whois Covered Only the original purchaser of this product is covered under this limited warranty This limited warranty is not transferable to subsequent purchasers or owners of this product What Kramer Electronics willdo Kramer Electronics will at its sole option provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty 1 Elect to repair or facilitate the repair of any defective parts within a
4. 3G HD SDI to Video Scan Converter I Tr tT 7 LEFT RIGHT VIDEQ AuDIO OuT CV Our YIC Out SDI In SDI Out Figure 1 VP 505 3G HD SDI to Video Scan Converter Feature l Function ON LED Lights green when the unit is powered on SDI LED Lights blue when an SDI signal is detected on the input 3 MENU Button Press to display the OSD On screen Display menu When the OSD is not displayed press together with the button to set the output resolution to NTSC ENTER Button In the OSD press to select the highlighted menu item When the OSD is not displayed press together with the button to set the output resolution to PAL 5 Button In the OSD press to step up through the options or to decrement the parameter value FREEZE Button In the OSD press to step down through the options or to increment the parameter value When the OSD is not displayed press to freeze the display SDI IN BNC Connector Connect to the SDI source SDI OUT BNC Connector Connect to the SDI acceptor loop The signal is re clocked and equalized LEFT Channel Connect to the left channel of the unbalanced stereo AUDIO RCA Connector audio acceptor 10 OUT RIGHT Channel Connect to the right channel of the unbalanced stereo RCA Connector audio acceptor CV OUT BNC Connector Connect to the composite video acceptor Y C OUT 4 pin Connector Connect to the Y C s Video acceptor 5V DC Connect to the power adapter center pin positive
5. DI to Video Scan Converter _ anno oar WWNDND NO Introduction Welcome to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unique creative and affordable solutions to the vast range of problems that confront video audio presentation and broadcasting professionals on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better Our 1 000 plus different models now appear in 11 groups that are clearly defined by function GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Routers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Products GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters and GROUP 11 Sierra Products Congratulations on purchasing your Kramer VP 505 3G HD SDI to Video Scan Converter which is ideal for the following typical applications e Projection systems in conference rooms boardrooms auditoriums hotels and churches production studios rental and staging e Monitoring of SDI signals using inexpensive video displays e Displaying down scaled SDI in legacy systems e Making video recordings of SDI content troduction 2 2 1 Getting Started We recommend that you Unpack the equipment carefully and save the original box and packaging
6. KRAMER ELECTRONICS LTD USER MANUAL MODEL VP 505 3G HD SDI to Video Scan Converter P N 2900 30001 3 Rev 3 wajo VP 505 Quick Start Guide This guide helps you install and use your product for the first time For more detailed information go to http www kramerelectronics com support product_downloads asp to download the latest manual or scan the QR code on the left Step 1 Check what s in the box A VP 505 3G HD DSI to Video Scan Converter Mp 4 Rubber feet 1 Power supply 5V DC 1 Quick Start sheet m Step 2 Install the VP 505 Mount the VP 505 in a rack using the optional RK T2B rack adapter or place on a table Step 3 Connect the inputs and outputs p 7 Step 4 Connect the power Connect the 5V DC power adapter to your VP 505 and plug the adapter into the mains electricity Step 5 Operate the VP 505 Set the parameters using the front panel buttons and the On screen Display OSD Contents 1 Introduction 2 Getting Started 2 1 Achieving the Best Performance 2 2 Safety Instructions 2 3 Recycling Kramer Products 3 Overview 3 1 Defining the VP 505 3G HD SDI to Video Scan Converter 4 Connecting the VP 505 5 Operating the VP 505 3G HD SDI to Video Scan Converter 5 1 Using the Front Panel Buttons 5 2 Using the OSD 6 Technical Specifications Figures Figure 1 VP 505 3G HD SDI to Video Scan Converter Figure 2 Connecting the VP 505 3G HD S
7. ates do not allow the exclusion or limitation of relief special incidental consequential or indirect damages or the limitation of liability to specified amounts so the above limitations or exclusions may not apply to you Exclusive Remedy TO THE MAXIMUM EXTENT PERMITTED BY LAW THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A CONSUMER PRODUCT UNDER THE MAGNUSON MOSS WARRANTY ACT 15 U S C A 2301 ET SEQ OR OTHER APPICABLE LAW THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU AND ALL IMPLIED WARRANTIES ON THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW Other Conditions This limited warranty gives you specific legal rights and you may have other rights w
8. blue value 0 255 VP 505 Operating the VP 505 3G HD SDI to Video Scan Converter 6 Technical Specifications OUTPUTS 1 SD HD 3G HD SDI on a BNC connector loop 1 composite video on a BNC connector 1 Y C s Video on a 4 pin s Video connector 1 unbalanced stereo audio on 2 RCA connectors OUTPUT RESOLUTIONS OUTPUT SIZE PROCESSING DELAY CONTROLS POWER CONSUMPTION OPERATING TEMPERATURE 0 to 40 C 32 to 104 F STORAGE TEMPERATURE HUMIDITY 10 to 90 RHL non condensing DIMENSIONS 18 8cm x 11 3cm x 2 6cm 7 4 x 4 5 x 1 W D H WEIGHT 0 57kg 1 26lbs approx ACCESSORIES Power supply OPTIONS RK T2B 19 rack adapter Specifications are subject to change without notice at http Awww kramerelectronics com Technical Specifications LIMITED WARRANTY The warranty obligations of Kramer Electronics for this product are limited to the terms set forth below Whatis Covered This limited warranty covers defects in materials and workmanship in this product What is Not Covered This limited warranty does not cover any damage deterioration or malfunction resulting from any alteration modification improper or unreasonable use or maintenance misuse abuse accident neglect exposure to excess moisture fire improper packing and shipping such claims must be presented to the carrier lightning power surges or other acts of nature This limited warranty does not cover any damage deterioration
9. der this limited warranty you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you For a list of authorized Kramer Electronics resellers and or Kramer Electronics authorized service providers please visit our web site at www kramerelectronics com or contact the Kramer Electronics office nearest you In order to pursue any remedy under this limited warranty you must possess an original dated receipt as proof of purchase from an authorized Kramer Electronics reseller If this product is returned under this limited warranty a return authorization number obtained from Kramer Electronics will be required You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product If itis decided that this product should be returned directly to Kramer Electronics this product should be properly packed preferably in the original carton for shipping Cartons not bearing a return authorization number will be refused Limitation on Liability THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY Some countries districts or st
10. hich vary from country to country or state to state This limited warranty is void if i the label bearing the serial number of this product has been removed or defaced ii the product is not distributed by Kramer Electronics or iii this product is not purchased from an authorized Kramer Electronics reseller If you are unsure whether a reseller is an authorized Kramer Electronics reseller please visit our Web site at www kramerelectronics com or contact a Kramer Electronics office from the list at the end of this document Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form Kramer Electronics thanks you for purchasing a Kramer Electronics product We hope it will give you years of satisfaction 12 VP 505 Technical Specifications For the latest information on our products and a list of Kramer distributors visit our Web site where updates to this user manual may be found We welcome your questions comments and feedback Web site www kramerelectronics com KRAMER E mail info kramerel com SAFETY WARNING Disconnect the unit from the power supply before opening and servicing P N 2900 300013 Rev 3
11. materials for possible future shipment e Review the contents of this user manual Go to http www kramerelectronics com to check for up to date user manuals application programs and to check if firmware upgrades are available where appropriate Achieving the Best Performance To achieve the best performance Use only good quality connection cables we recommend Kramer high performance high resolution cables to avoid interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low quality cables Do not secure the cables in tight bundles or roll the slack into tight coils e Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer VP 505 away from moisture excessive sunlight and dust This equipment is to be used only inside a building It may only be connected to other equipment that is installed inside a building 2 2 2 3 Safety Instructions Caution There are no operator serviceable parts inside the unit Warning Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning Disconnect the power and unplug the unit from the wall before installing Recycling Kramer Products The Waste Electrical and Electronic Equipment WEEE Directive 2002 96 EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it t
12. nu see Section 5 2 1 Press a second time to close the OSD e FREEZE Freezes the display Press a second time to unfreeze the display e MENU and Press together to set the output to NTSC e ENTER and FREEZE Press together to set the output to PAL Using the OSD The OSD is used to set a variety of parameters When using the OSD the front panel buttons operate in the following manner e MENU Opens the OSD main menu see Section 5 2 1 Press a second time to close the OSD e ENTER Selects the highlighted menu item or parameter e Steps up through the menu list or decrements the parameter value e Steps down through the menu list or increments the parameter value Note After a period of 15 sec with no button activity the OSD menu times out automatically VP 505 Operating the VP 505 3G HD SDI to Video Scan Converte Parameter Setting Example To set the green offset value of the display output to 42 1 From normal operation press MENU The OSD main menu appears on the screen Press the or button to highlight COLOR COLOR changes to green Press ENTER The Display submenu is displayed Press the or button to highlight G OFFSET G OFFSET changes to green Press ENTER The G OFFSET parameter changes to red Press the button to increase the value to 42 Press ENTER to set the value G OFFSET is highlighted in green To exit normal operation press MENU 5 2 1 5 2 2 5 2 3
13. o be collected and recycled To comply with the WEEE Directive Kramer Electronics has made arrangements with the European Advanced Recycling Network EARN and will cover any costs of treatment recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility For details of Kramer s recycling arrangements in your particular country go to our recycling pages at htto www kramerelectronics com support recycling Overview The Kramer VP 505 3G HD SDI to Video Scan Converter is a high quality scan converter for down scaling SDI HD SDI and 3G HD SDI signals to PAL or NTSC video The VP 505 features e A maximum data rate of 3Gbps e An SDI input e An equalized and re clocked loop output up to 3G HD SDI e Multi standard operation SDI SMPTE 259M and SMPTE 344M HD SDI SMPTE 292M and 3G HD SDI SMPTE 424M e Simultaneous high quality composite video and s Video Y C outputs e A unbalanced stereo audio output e An OSD On screen Display accessible via the front panel buttons for easy setup and adjustment e A built in ProcAmp for convenient signal adjustment e A non volatile memory that retains the last settings used e A freeze button e Anexternal 5V DC source making it suitable for field operation e Operation directly via the front panel push buttons and the OSD 3 1 VP 505 Overview Defining the VP 505 3G HD SDI to Video Scan Converter This section defines the VP 505
14. reasonable period of time free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition Kramer Electronics will also pay the shipping costs necessary to return this product once the repair is complete 2 Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product 3 Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty What Kramer Electronics will not do Under This Limited Warranty If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to repair Kramer Electronics products this product must be insured during shipment with the insurance and shipping charges prepaid by you If this product is returned uninsured you assume all risks of loss or damage during shipment Kramer Electronics will not be responsible for any costs related to the removal or re installation of this product from or into any installation Kramer Electronics will not be responsible for any costs related to any setting up this product any adjustment of user controls or any programming required for a specific installation of this product How to Obtain a Remedy under this Limited Warranty To obtain a remedy un
Download Pdf Manuals
Related Search