Philips 39HFL2808D 39" Full HD Black
Contents
1. 63 Range values 0 63 Fixed Volume Enable Feature to set Volume to a set Fixed Volume Off Volume is fixed to the level set at Fixed Volume Value item Fixed Volume Value Feature to set the Fixed Volume level 20 Range values 0 63 Headphone Direct Volume Startup Position Control Head Phone out volume instead of TV speakers TV speakers volume Is set to Last Status before Hotel Mode Is activated Disabled Studio 32 39HFL2808D 12 Page 24 Hotel TV Menu settings Feature to hide menu items when the Remote Control Menu key is pressed Disable All Menus OSD Disable o all menu icons are hidden Disable Setup Menus Disable All Menus O picture sound settings and media browser menu Icons are displayed When Hotel Mode is set to Off all TV menu items will be displayed picture sound settings Install and retune channel list media browser Feature to hide Teletext display Teletext ivati On to enable Teletext activation Off Copy To USB Feature to copy configuration and channel settings OK gt Select OK to copy settings to a USB device connected to side l O Copy From USB Feature to copy configuration and channel settings of a similar TV lt OK gt Select OK to copy settings from a USB device connected to side l O Feature to set the channel to view when the TV wakes up Use Digits button s to complete entry field 1 All ti2. Note Access to the Hotel TV Menu is by the use of lt Help Menu gt on the HTV Setup RC or on the standard RC using key sequence Menu 7 9 3 5 Below settings are only active while Hotel Mode is On Pin8 Feature to enable or disable the auto SCART feature Off This feature allows a connected SCART device to turn the TV on or off Feature to enable or disable the last status feature This feature allows the TV to remember the last used configuration and restores when startup again Otherwise default settings are used Last Status Feature to enable or disable the functionality of the side control TV button Select On to lock the side control TV button Select Off unlock the side control TV button Panel Lock Enable or disable the functionality Remote Control RCU Inhibit Select On to block all RC commands except the HotelT V SetUp RC Home Menu key or the standard RC Menu 7 9 3 5 key sequence Select Off and all RC commands are enabled Select startup program source when TV is switched on via Power On key or Digit keys Auto V wakes up in last used channel source e TV wakes up with the channel specified in Startup Channel field LIV EXT1 EXT1 S Side AV HDMI2 YPbPr VGA PC TV wakes up with the specified external source Startup Channel 1 Feature to select the channel to be used as Startup Position Volume Limit Feature to set the maximum volume level
3. and press OK to continue To display parental lock menu options the PIN number should be entered The factory default PIN number is 0000 After coding the correct PIN number parental settings menu will be displayed Menu Lock Menu lock setting enables or disables the menu access Maturity Lock When set this option gets the maturity information from the broadcast and if this maturity level is disabled disables access to the broadcast Child Lock When Child Lock is set the TV can only be controlled by the remote control In this case the control panel buttons will not work Set PIN Defines a new PIN number IMPORTANT The factory default pin number is 0000 if you change the pin number make sure you write it down and keep it safe Note If the Country option is set to France or Italy you can use 4 25 as the default code Studio 32 39 HFL2808D 12 Page 14 TV Menu Features and Functions Settings Menu Contents Conditional Access Controls conditional access modules when available Configures language settings may change depending on the country selected Preferred Language and current settings will be available Current settings can be changed only if the broadcaster supports Parental Configures parental settings see page 14 Tissue Sets timers for selected programs Sets sleep timer to turn off the TV after a certain time Recording If removable device hard disk is connected to USB p
4. button to cancel Studio 32 39HFL2808D 12 Page 16 Electronic Program Guide Some but not all channels send information about the current and next programs Press the EPG button to view the EPG menu Up Down Left Right Navigate EPG OK Displays program options INFO Displays in detail information on program selected GREEN Switches to List Schedule EPG YELLOW Switches to Timeline Schedule EPG BLUE displays filtering options Program Options In EPG menu press the OK button to enter the Event Options menu Select Channel In EPG menu using this option you can switch to the selected channel Software Upgrade Your IV is capable of finding and updating new software upgrades over broadcast channels if available For broadcast channels search TV looks the available channels stored in your settings So before software upgrade search it is advised to auto search and update all available channels 1 Software Update via USB Input Before starting Ensure that you have a USB flash disk with appropriate free space Do not use a USB hard disk drive for the software update process Get software updates from your dealer or www philips com support Check the current software version of your TV using the MENU gt Settings gt Other Settings gt Software Upgrade item If the version you have found Is not newer than the current version on your TV it is not necessary to update your product Do n
5. not be compatible with this TV The TV supports FAT32 and NTFS disk formatting Note While formatting a USB hard disk that has 1TB TeraByte or more file capacity you can experience problems with the formatting process Quickly plugging and unplugging USB devices is a very hazardous operation Do not repeatedly quickly plug and unplug the drive This may cause physical damage to the USB player and USB device itself Do not pull out USB module while playing a file Media Browser Menu You can play photo music and movie files stored on a USB disk by connecting it to your TV and using the Media Browser screen To do this perform the following Connect a USB disk to one of the USB inputs located on the side of the TV Press MENU button and select Media Browser tab by using Left Right and OK buttons Main media browser screen will be displayed You can display the related content by selecting the Video Music or Picture tab Follow the button indications under each on screen menu for media playback features You can set your Media Browser preferences by using the Settings dialogue Studio 32 39HFL2808D 12 Page 12 TV Features and Functions Picture Menu Contents For your viewing requirements you can set the related mode option Picture mode can Tode be set to one of these options Cinema Game Sports Dynamic and Natural Contrast Sets the lightness and darkness values of the screen Brightness Set
6. the TV until shut down so the TV will switch to standby mode To power down the TV completely unplug the power cord from the mains socket Note When the TV is switched to standby mode the standby LED can blink to indicate that features such as Standby Search Over Air Download or Timer is active First Time Installation When turned on for the first time language selection screen is displayed in all language options listed alphabetically Press the W or A button to highlight the required language press OK button to select First Time Installation appears Use or P gt button to set the required country and press MW button to select Search Type Use V or gt to set the desired Search Type Available search types are Digital and analog digrtal only and analog only When set press W to select Teletext Language Use lt Q or gt to select Teletext Language Next select Scan Encrypted and set as Yes if you want to scan coded stations Press OK button on the remote control to continue and the search type screen will be displayed You must select a search type to search and store broadcasts from the desired source IMPORTANT When you select Country option as France or Italy you will be asked to set and confirm a PIN number Selected PIN number cannot be 0000 Enter a PIN number and confirm it by entering once more Press OK button to continue lf the two PIN number
7. the TV disassemble the stand from the TV Never lie the TV on its back with the stand installed Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage Is different Parts of this product can be made of glass Handle with care to avoid injury and damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children Never place the V on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over the edge of the surface Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable SUDDDOFt Educate children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Risk of overheating Never install the V in a confined space Always leave a space of at least 4 Inches or 10 cm around the TV for ventilation Ensure that curtains or other objects never cover the ventilation slots on the TV Risk of injury fire or power cord damage Never place the TV or any objects on the power cord Disconnect the TV from the power outl
8. there is a color lookup table used that is limiting the number of colors available to display This can result in certain display color artifacts and using a limited number of different color values can improve this The picture can be loaded into the TV using the Copy from USB command in the Hotel TV Menu In the Hotel TV Menu set the entry Welcome Screen On Once this feature is configured and set the welcome image will be displayed within 8 seconds after switch on This page will remain until a key on the RC Is pressed Studio 32 39 HFL2808D 12 Page 26
9. 32HFL2808D 12 39HFL2808D 12 EN User Manual Studio 32 39 HFL2808D 12 PHILIPS For support please check your warranty card or www philips com support Studio 32 39 HFL2808D 12 Page 2 Contents OO ON gt O ek N W N Important Information Notice Sustainability Help and support TV Control switch amp Operation Stand Installation Un Installation Viewing remote control Viewing the connections Switching On Off First Time Installation Media Playback via USB input TV Features and Functions Software Upgrade Specifications Supported File Formats and Compatibility TV Menu Professional Mode Hotel TV Options CON ON U 4 11 11 12 13 17 19 21 23 26 Studio 32 39HFL2808D 12 Page 3 Important Information Safety Read and understand all instructions before you use your If damage Is caused by failure to follow the instructions the warranty does not apply Risk of electric shock or fire Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep can
10. D TV may not be displayed properly The problem may be an inconsistency with standards from the source equipment If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment Studio 32 39HFL2808D 12 Page 22 TV Menu Professional Mode Features and Functions Hotel Setup RC 22AV8573 Enter Hotel TV Menu It is only possible to enter the Hotel TV Menu for the Professional Mode using the optional Hotell V SetUp Remote Control 22AV8573 To enter the Hotel TV menu press RC5 Setup key press Home Menu key Note Only the Home Menu key on the HotelTV SetUp RC 22AV8573 will control the TV No other keys will function on this TV To make changes use the Remote Control that is included with the TV The RC 22AV85 3 is optional and INO part of the standard accessories This RC can be purchased at your dealer Exit Hotel TV Menu Leaving the Hotel TV Menu after making the required settings can be done using the HotelTV SetUp Remote Control 22AV8573 and the with the TV included standard Remote Control To exit the Hotel TV menu press RC5 Setup key press Home Menu key Standard RC To exit the Hotel TV menu with standard RC press Menu key Studio 32 39HFL2808D 12 Page 23 Hotel TV Menu settings Feature to enable or disable the Hotel Menu features When enabled the TV will follow configured feature settings Hotel Mode Off
11. H 5H e more oo 1280960 eez PC Typical Display Modes The following table is an illustration of some of the typical video display modes Your TV may not support all resolutions Your TV supports up to 1920x1080 1 Oz 3 osas om 4 oors om TT 5 boss om 6 2040 om 800x600 om osas om Studio 32 39 HFL2808D 12 Page 20 Supported File Formats for USB Mode Media File Extension Maximum resolution Bit rate etc mpg Mpeg dat MPEG1 2 F264 h MEZ MPEG MPEG4 Xvid 1 Xvid 1 01 Xvid 1 02 Xvid 1 03 Xvid 1 02 Xvid 1 03 Xvid Xvid 110 betal 2 beta1 2 H pa ng Fam 32Kbps 448Kbps Bit rate 8Kbps 384Kbps Bit rate 1 2 Layer 1 8Kbps 320Kbps Bit rate 32KHz 48KHz Sampling rate A O 32Kbps 640Kbps 32 44 1 48KHz BEEN EAC3 MDS MESES Ss peso 22 44 Mola Music Free format 8KHz 48KHz Sampling rate 128Kbps 320Kbps 8 48KHz WMA Pro lt 768Kbps 96KHz Embedded in video files 64Kbps 1 5Mbps 8 48KHz IMA ADPCM m EN MS ADPCM Embedded in video files 384Kbps 8 48KHz Photo ma Wi 960086400 Studio 32 39HFL2808D 12 Page 21 AV and HDMI Signal Compatibility Supported Signals Available PAL 50 60 Oo NTSC 60 EXT SCART Me RGB 60 X Not Available O Available In some cases a signal on the LE
12. ber of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction CE compliance Ce This product is in compliance with the essential requirements and other relevant provisions of Directives 2006 95 EC Low Voltage 2004 108 EC MC Compliance with EMF TP Vision Netherlands B V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing the products Studio 32 39 HFL2808D 12 Page 5 Philips is committed to develop produce and market products that cause no adverse health effects TP Vision confirms that if Its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments In standardisation for early integration in its products Trademarks and co
13. ct Philips Consumer Care in your country for support The number is available in the leaflet accompanying this product or online at www philips com support Before you contact Philips write down the model and serial number of your TV You can find this information on the back of your TV or on the TV packaging Studio 32 39HFL2808D 12 Page 6 Important information TV Control switch amp Operation 1 Up direction 2 Down direction 3 Program switch Program switch can control Volume AV Standby On Note You can move the switch upward or downward to change the volume If you want to change channels press the middle of the switch once Position 3 and then move upward or downward If you press the middle of the switch once more source OSD will be displayed If you press the middle of the switch and hold about a few seconds the TV will switch to standby mode Main menu OSD cannot be displayed via control buttons Operation with the Remote Control Press MENU button on your remote control to display main menu screen Use Left or Right button to select a menu tab and press OK to enter Use Left Right Up Down to select or set an item Press MENU or RETURN button to quit a menu screen Once you have connected external systems to your you can switch to different input sources Press SOURCE button on your remote control consecutively to select the different sources You can chang
14. ction cables to enable connection See the illustrations above To enable PC audio you will need to use the supplied SIDE AV CONNECTION cable s WHITE amp RED inputs If an external device is connected via the SCART socket the TV will automatically switch to AV mode When receiving DIV channels Mpeg4 H 264 or while in Media Browser mode output will not be available via the scart socket We recommend that you plug all your cables into the back of the TV before mounting on the wall Insert or remove the Cl module only when the TV is SWITCHED OFF You should refer to the module instruction manual for details of the settings Note You can use YPbPr to VGA cable not supplied to enable YPbPr signal via VGA input WARNING You cannot use VGA and YPbPr at the same time Studio 32 39 HFL2808D 12 Page 10 Switching On Off To Switch the TV On Connect the power cord to the 220 240V AC 50 Hz Then the standby LED lights up To switch on the TV from standby mode either o Press the button P CH or P CH or a numeric button on the remote control o Press the control switch left side of the TV The TV will then switch on Note If you switch on your TV via CH or CH buttons on the remote control or on the TV set the program that you were watching last will be reselected By either method the TV will switch on To Switch the TV Off Press the O button on the remote control or hold the control switch on
15. d similar changes Page 15 Store mode If enabled will store changes to channels are made Power Up Mode Power up of TV will be Standby mode or Last Status at moment of power down TV Menu Features and Functions Install and Retune Menu Contents Displays automatic tuning options Digital Aerial Searches and stores aerial DVB stations Automatic Channel Digital Cable Searches and stores cable DVB stations Scan Retune Analogue Searches and stores analogue stations Digital Aerial amp Analogue Searches and stores aerial DVB and analogue stations Digital Cable amp Analogue Searches and stores cable DVB and analogue stations Manual Channel This feature can be used for direct broadcast entry can Network Channel Searches for the linked channels in the broadcast system can You can use this setting for fine tuning analogue channels This feature Is not avallable if no Analogue Fine Tune analogue channels are stored Deletes all stored channels and settings resets TV to factory settings and starts first time First Time installation You can follow the instructions in the Initial Installation section for more Installation information on this process Visible for Denmark Sweden Norway or Finland Clear Service List and then press Clear Service List OK The following OSD will be displayed on the screen Select YES and press OK to continue or select NO and press OK
16. dles or other flames away from the TV remote control and batteries at all times Never insert objects Into the ventilation slots or other openings on the TV Never expose the remote control or batteries to rain water or excessive heat Avoid force coming onto power plugs Ensure that the power plug is fully inserted into the power socket Loose power plugs can cause arcing or fire When the TV is swiveled ensure that no strain Is exerted on the power cord Strain on the power cord can loosen connections and cause arcing To disconnect the TV from the mains power the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have lull access to the power plug power cord and outlet socket at all times Risk of damage to the TV Two people are required to lift and carry a TV that weighs more than 25kg or 55165 When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount TP Vision Netherlands B V bears no responsibility for improper wall mounting that results in accident injury or damage If you need to store
17. e is in User This setting is used for emphasizing left or right speaker balance Headphone Sets headphone volume Sound Mode You can select Stereo Dual or Dual Il mode only if the selected channel supports that mode Automatic Volume Limiting AVL function sets the sound to obtain fixed output level between programs For instance volume level of advertisements tends to be louder than programs Press 4 or Db button to set Dynamic Bass as On or Off Press Db button to set Surround sound option On or Off Digital Out Sets digital out audio type to PCM or Compressed Using the Channel List The TV sorts all stored stations in the Channel List You can edit this channel list set favorites or set active stations to be listed by using the Channel List options Select Channel List from the main menu Select Edit Channel List to manage all stored channels You can move delete edit name and lock channels using this screen Select Favorites to create a list of favorite programs Select Active Channel List to sort channel list You can select a broadcast type option from the displayed list by using Y or A and OK buttons Note Broadcast type can be changed from other settings menu Configuring Parental Settings To prohibit viewing of certain programs channels and menus can be locked by using the parental control system Highlight Parental in the Settings menu
18. e the channel and adjust the volume by using the and P CH buttons on the remote General Operation Installing the Batteries to the Remote Lift the cover on the back of the remote upward gently Install two AAA batteries Make sure to match the and ends of the batteries in the battery compartment observe the correct polarity Replace 9 the cover 2 Connect Power amp Antenna Cable IMPORTANT The TV set is designed to operate on 220 240V AC 50 Hz socket After unpacking allow the TV set to reach the ambient room temperature before you connect the set to the mains Plug the power cable to the mains socket outlet Aerial or Cable umm Accessories included Remote Control Batteries 2 x AAA Studio 32 39HFL2808D 12 Page 7 Detachable Stand Installation Method TV is laid on a flat surface Make sure that there are no objects on the table that can damage harm the TV 2 Position the stand so that it coincides with the stand mounting points 4x on the TV Once it Is positioned fix the stand with four screws to the TV 4 screw holes for fixing stand to Detachable Stand Un Installation Method 1 TV is laid on a flat surface HESSE MEE 2 Remove four screw that fix stand to TV MSM ML E 3 Stand is pulled back 4 Stand is detached screw holes for fixing stand to Studio 32 39 HFL2808D 12 Page 8 Vi
19. et and aerial before lightning storms During lightning storms never touch any part of the power cord or aerial cable Studio 32 39 HFL2808D 12 Fase 14 Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the V is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care Risk of damage to the TV screen Never touch push rub or strike the screen with any object Unplug the TV before cleaning Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV To avoid deformations and color fading wipe off water drops as soon as possible Avoid stationary images as much as possible Stationary images are images that remain onscreen for extended periods of time Stationary images include onscreen menus black bars time displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage Notice 2012 TPVision Netherlands B V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners P Vision Netherlands B V reserves the right to change products at any time without being ob
20. evel Colour Shift Adjust the desired colour tone RGB Gain Setting Adjust the desired gain settings for Red Green and Blue Autoposition in PC mode Automatically optimizes the display Press OK to optimize H Position in PC mode This item shifts the image horizontally to right hand side or left hand side of the screen V Position in PC mode This item shifts the image vertically towards the top or bottom of the screen Dot Clock in PC mode Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts Phase in PC mode Depending on the resolution and scan frequency that you input to the TV set you may see a hazy or noisy picture on the screen In such a case you can use this item to get a clear picture by trial and error method While in VGA PC mode some items in Picture menu will be unavailable Instead VGA mode settings will be added to the Picture Settings while in PC mode Studio 32 39 HFL2808D 12 Page 13 TV Menu Features and Functions Sound Menu Contents Volume Adjusts volume level Equalizer In equalizer menu the preset can be changed to Music Movie Speech Flat Classic and User Press OK to enter the menu Press the MENU button to return to the previous menu Equalizer menu settings can be changed manually only when the Equalizer Mod
21. ewing remote control Teletext mix Standby Image Size Sleep Timer Info Reveal in TXT mode Source selection Yellow button Current language in DVB Channel Mono Stereo Dual I II in Analog Channel 8 Blue button 9 Green button 10 Red button 11 Navigation buttons Subpage in TXT mode 12 OK Hold in Text mod Channel List 13 Return Back Index page in TXT mode SIO BR WN gt 14 Electronic Programme Guide 15 Menu on off 16 Mute 17 Programme up down 18 Previous Programme Now in EPG mode 19 Volume up down PAPA tS RS E HCAM 20 Numeric buttons Digital Teletext for UK only Press RED button to view digital teletext information Operate it with the coloured buttons cursor buttons and OK button The operation method may differ depending on the contents of the digital teletext Follow the instructions displayed on digital teletext screen Studio 32 39HFL2808D 12 Page 9 Viewing the connections Cables Not spied Scart 11411111211 111111111 Connection back VGA Connection back PE cm Connection id Side Audo Vides side Connection Cable PC Audio Cable HDMI Connection back SPDIFF Connection back Side AV Connection side AY Connection Cable E d PHONE e Headphone Connection side USB Connection side CI Connection side NOTE When connecting a device via the Side AV input you must use the supplied conne
22. g Studio 32 39HFL2808D 12 Page 25 Disable High Security Hotel TV Options Service Menu Enter Service Menu It is only possible to enter the Service Menu if the Hotel Mode is disabled Hotel Mode set to Off If enabled open the Hotel TV Menu and set Hotel Mode to Off To enter the Service Menu press Menu key press key sequence lt 1 gt lt 2 gt lt 3 gt lt 6 gt lt 5 gt lt 4 gt All items are unselectable under the Service Menu The software version number will shown as VES11E_x y z MultiRC setup Enter MultiRC Menu Feature to program a RC to pair toa TV To enter the MultiRC Menu press Menu key press key sequence lt RETURN gt lt 1 gt lt 2 gt lt 3 gt lt 4 gt On the TV a menu will guides you to select desired TV Press relevant key and then press OK key to finish the programming Enter MultiRC Menu Feature to reset the RC TV To enter the MultiRC Menu press Menu key press key sequence lt RETURN gt lt 4 gt lt 3 gt lt 2 gt lt 1 gt On the TV you will see a dialog Reset OK Press OK key to reset the system After resetting the system will return to the factory default Welcome Picture Store in a welcome image directory on a USB device a picture file with the name hotel wel png lt USB gt welcome image hotel wel png Picture characteristics Name extension Hotel wel png Resolution 260h x 540v Note For the welcome picture
23. his operation you can set Search Step as 8000 KHz or 1000 KHz If you select 1000 KHz the TV will perform search process in a detailed way Searching duration will thus increase accordingly Depending on your Country selection in the first time installation 250KHz search step option might be available on Network Channel Scan screen Note that if you perform the search with 250KHz option search process could take a longer time Studio 32 39 HFL2808D 12 Page 11 Additionally for some countries Network ID option will be available Network ID feature gets the Network Information Table This table provides information on the selected network It may change according to the operator and the region where that operator actively broadcasts VVhen finished press OK button to start automatic search The TV will search and store available broadcasts Media Playback via USB input You can connect a USB hard disk drive or USB memory stick to your TV by using the USB inputs of the TV This feature allows you to play files stored in a USB drive 2 5 and 3 5 inch hdd with external power supply external hard disk drives are supported IMPORTANT You should back up your files before making any connections to the TV set in order to avoid any possible data loss Manufacturer will not be responsible for any file damage or data loss It is possible that certain types of USB devices e g MP3 Players or USB hard disk drives memory sticks may
24. liged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained TP Vision Netherlands B V warrants that the material itself does not infringe any United States patents No further warranty Is expressed or implied TP Vision Netherlands B V cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Terms of warranty Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself Use the TV and accessories only as intended by the manufacturer The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Care for service or repairs CAUTION RISK OF ELECTRIC SHOCK ATTENTION RISQUE DE CHOC ELECTRIQUE PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD LED product has a high num
25. mers and events are not possible to set once all menus are hidden Already set e Off to hide Teletext Wakeup Time Channel events must be cleared before hide all menus gt gt gt OSD Disable gt Disable All Menus Wakeup Time Volume Feature to set the wakeup time volume level 40 Range values 0 63 Feature to detect if a USB device is connected e On to enable USB device detection e Off to disable USB device detection USB option On When Off the Media Browser icon will be displayed but cannot be activated I Feature to hide picture menu icon Fixed Pic Mode Off Off picture icon is displayed amongst all menu On picture icon is hidden Digital Tuner Off mixture of analog and digital channels On On digital channels only Feature to select a unique RC address 1 out of 4 a k a MultiRC e Off feature is disabled On feature is enabled and shows what RC is set Multiple RC support Off Feature to show a welcome screen at startup e On a welcome screen is shown e Off a welcome screen is hidden Welcome Screen On NIT Update Feature to retrieve channel table information On Retrieve NIT information e Disable Dont use NIT table Feature to limit Hotel Mode menu access Off On Access to Hotel IMenu only by Hotel Setup Remote e Off Access to the Hotel Menu also with standard TV RC Reset to Default Feature to reset all features to standard factory settin
26. nformation you can use this setting In order for the proper operation once Automatic scanning is set to Enabled please ensure that the TV is set to standby mode Select Scan for Upgrade is OK manual search for update is initiated Application Version Displays current application software version Hard of Hearing If the broadcaster enables any special signal concerning the audio you can set this setting as On to receive such signals Audio Description Audio description refers to an additional narration track for blind and visually impaired viewers of visual media including television and movies You can use this feature only if the broadcaster supports that additional narration track Auto TV Off Timeout value Auto 1 6 hour When the timeout value is reached and the TV is not operated for selected time the TV will go off Standby Search optional Studio 32 39 HFL2808D 12 If you change Standby Search to Off this function will be unavailable When the Standby Search is set to On and if the TV is in standby mode available broadcasts will be searched If the TV locates any new or missing broadcasts a menu screen will be displayed asking you whether or not to execute these changes Channel list will be updated and changed after this process Please activate Standby Search setting in order to enable your TV for automatically updating the broadcast frequency of the broadcaster broadcast definition an
27. of new software is finished successfully During reboot TV makes final initialization In reboot sequence panel power is closed and front led indicates the activity with blinking Around 5 minutes later TV restarts with new software activated The IV may start in first time installation mode If your TV fails to restart in 10 minutes unplug power for 10 minutes and re plug again TV should open with new software safely If you still cannot get TV working please kindly repeat unplug and plug sequence a few times more If your set still cannot operate please call the service personnel to fix the problem for you Caution While led is blinking during reboot do not unplug your TV s power Doing this may cause your TV not to re open again and can only be fixed by service personnel Studio 32 39 HFL2808D 12 Page 17 Troubleshooting amp Tips Image persistence ghosting Please note that ghosting may occur while displaying a persistent image still or paused image LED TV s image persistence may disappear after a short time Try turning off the TV for a while To avoid this do not leave the screen in stil picture mode for extended periods No power If your TV has no power please check the power cord plug is connect to the mains power socket Poor picture 1 Have you selected the correct TV system 2 your TV or house aerial located too close to non earthed audio equipment or neon lights etc 3 M
28. ort recording and playback features Configuration are enabled Note The TV takes the time info via the broadcast Correct time will be available on Date Time Settings if the time info is provided in the broadcast Sets date and time If the TV is in no channel mode Date Time settings can be changed However if there Is a channel preset only Time Settings Mode can be changed and if this is set to Manual Date Time Time Zone will be enabled If the TV is switched to standby mode and switched on later and there is no broadcast available time information will not be updated If there is a present broadcast however time information will be taken via the broadcast In other words time information will be available according to these priorities The TV first looks for the time info in the broadcast then to the user preference and lastly to the teletext time information Sources Enables or disables source selection Other Settings Contents Menu Timeout Changes timeout duration for menu screens Off 15s 30s 60s Scan Encrypted Blue Background optional When this setting Is on search process will locate the encrypted channels as well If it Is set as Off encrypted channels will not be located in automatic search or manual search Activates or deactivates blue background system when the signal is weak or absent Software Upgrade To ensure that your TV always has the most update i
29. ossible that no device is connected 2 Check the AV cables and connections if you have tried to connect a device Studio 32 39HFL2808D 12 Page 18 Specifications TV BROADCASTING PAL SECAM B G D K K I L L DIGITAL RECEPTION DVB T MPEG2 DVB T MPEG4 HD DVB T MHEG 5 Engine for UK only DVB C MPEG2 DVB C MPEG4 HD RECEIVING CHANNELS VHF BAND UHF BAND U HYPERBAND NUMBER OF PRESET CHANNELS 1000 800 DVB T 200 Analogue CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm unbalanced OPERATING VOLTAGE 220 240V AC 50 Hz AUDIO German Nicam Stereo AUDIO OUTPUT POWER WRMS 10 THD 2 x SW 32HFL2808D 12 POWER CONSUMPTION EU energy label 41W PANEL 16 9 display 32 Screen Size VESA Mounting 200mm x 100mm Screw Type M4 DIMENSIONS mm With foot DxLxH mm 185 x 742 x 489 Weight Kg 6 9kg Without foot DxLxH mm 89 105 x 742 x 451 Weight Kg 6 3kg 39HFL2808D 12 POWER CONSUMPTION EU energy label t b c PANEL 16 9 display 39 Screen Size VESA Mounting 200mm x 200mm Screw Type M4 DIMENSIONS mm With foot DxLxH mm 220 x 893 x 570 Weight Kg 9 5kg Without foot DxLxH mm 77 xxx x 893 x 530 Weight Kg 8 kg Studio 32 39HFL2808D 12 Page 19 Supported DVI Resolutions When connecting devices to your TV s connectors by using DVI to HDMI cables not supplied you can refer to the following resolution information 75H 6 1152864 602 70
30. ot install a lower version of the software since this may cause problems After obtaining the most recent software copy the BIN file to the USB flash disk Now connect the USB flash disk to the USB input of your TV Switch off your TV using the main control switch of the TV and unplug the power cord Hold the remote control towards the TV Now press the OK button and keep pressing the OK button Do not release the OK button now Plug the TV to the mains and switch on the TV Keep pressing the OK button five seconds more after the TV switches on and release it afterwards Software update process should now start The IV will switch on in First Time Installation mode after the software update finishes IMPORTANT Do not press any other buttons on the TV or on the remote control during the software update Do not remove the USB flash disk from the TV during the process To prevent accidental updates please use your computer to delete the BIN file on your USB flash disk after the software update Is successfully finished 2 3 AM search and upgrade mode If Automatic scanning In Upgrade Options menu is enabled TV wakes up at 03 00 and searches broadcast channels for new software upgrade If new software Is found and downloaded successfully with next power up TV opens with new software version Note on reboot operation Reboot is the last step in software upgrade operation if download
31. ountains or high buildings can cause double pictures or ghost images Sometimes you can improve the picture quality by changing the direction of the aerial Is the picture or teletext unrecognisable 4 Check if you have entered the correct frequency 5 Please retune the channels 6 The picture quality may degrade when two devices are connected to the TV at the same time In such a case disconnect one of the devices No picture 1 No Picture means that your TV is not receiving a transmission Have you selected the correct button on the remote control Try once more Also make sure the correct input source has been selected Is the antenna connected properly 3 Are the plugs connected tightly to the antenna socket 4 5 the antenna cable damaged 5 Are suitable plugs used to connect the antenna 6 If you are in doubt consult your dealer No sound 1 Has the TV been set to mute To cancel mute press DRC button or increase the volume level 2 Sound is coming from only one speaker Is the balance set to one extreme See Sound Menu section Remote control does not operate Your TV no longer responds to the remote control The batteries may be exhausted if so you can still use the control buttons on the TV Is only possible if they are not blocked by parental control and if they are available with your model Input sources cannot be selected 1 lfyou cannot select an input source it IS p
32. pyrights Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries I DOLBY DIGITAL PLUS Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HIGH DEFINITION MULTIMEDIA INTERFACE The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countnes All other registered and unregistered trademarks are the property of their respective owners Sustainability Energy efficiency This TV is designed with energy efficient features To access these features press the Green button on the remote control Energy saving picture settings You can apply a a combination of energy saving picture settings While you watch TV press the Green button and select Energy saving Screen off If you only want to listen to audio from the TV you can switch offthe 1V display Other functions continue to operate normally End of use Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please Inform yourself about the local separate collection system for electrical and electronic prod
33. s match your master PIN number will be set WARNING When you are required to enter a PIN number for any menu operation you should use the PIN that you have previously defined during the first time installation If you have forgotten the PIN number you have set during the first time Installation you should use the master PIN code 4 25 Aerial Installation If you select AERIAL option from the Search Type screen the television will search for digital terrestrial TV broadcasts amp NOTE You can press MENU button to cancel After all the available stations are stored Channel List will be displayed on the screen If you like the sort channels according to the LCN please select Yes and then press OK Press MENU button to quit channel list and watch T V LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence if available Cable Installation If you select CABLE option from the Search Screen press OK button on the remote control to continue To continue please select YES and press OK To cancel operation select NO and press OK You can select frequency ranges from this screen For highlighting lines you see use Y or A button You can enter the frequency range manually by using the numeric buttons on the remote control Set Start and Stop Frequency as desired by using the numeric buttons on the remote control After t
34. s the brightness value for the screen Sharpness Sets the sharpness value for the objects displayed on the screen Colour Sets the colour value adjusting the colors Power Save Mode Press or P button to set mode as Disabled Eco or Screen Off Backlight optional This setting controls the backlight level and it can be set to Auto Low Medium and High Mode Backlight function will be inactive if Power Save Mode is set to On Backlight cannot be activated in VGA Media Browser mode or while the picture mode is set to Game Noise Reduction If the broadcast signal is weak and the picture is noisy use Noise Reduction setting to reduce the noise amount Noise Reduction can be set to one of these options Low Medium High or Off Advanced Settings Press OK to enter Advanced Settings Menu Reset Press to resets the picture settings to factory default settings Advanced Settings Dynamic Contrast Sets the desired contrast level Off Low Medium High Colour Temp Sets the desired colour tone Normal Warm Cool Picture Zoom Sets the picture size to Auto 16 9 Subtitle 14 9 14 9 Zoom 4 3 or Cinema Films are recorded at a different number of frames per second to normal television Film Mode programs When this feature set to Auto when you are watching films to see the fast motion scenes clearly Skin Tone Adjust the desired skin color l
35. ucts Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health EU energy label he European Energy Label informs you on the energy efficiency class of the product The greener the energy efficiency class of this product is the lower the energy it consumes On the label you can find the energy efficiency class the average power consumption of the product in use and the average energy consumption for 1 year You can also find the power consumption values for the product on the Philips website for your country at www philips com T V Help and support Visit Philips website Visit the Philips support website at www philips com support At the Philips support website you can also Find answers to Frequently Asked Questions FAQ Download a printable PDF version of this user manual Email us a specific question Chat online with our support personnel available in certain countries only Contact Philips You can conta
Download Pdf Manuals
Related Search