Argoclima Hi Floor Design Plus
Contents
1. OFF 0 OFF max maximum temperature Low power 750 Watt forced ventilation turbo Il Medium power 1250 Watt Ill High power 2000 Watt Room temperature can be regulated by rotating the thermostat clockwise to increase or anticlockwise to decrease temperature When turning the panel on we recommend turning the thermostat knob to maximum then when a pleasant room temperature has been obtained turn the thermostat dial anticlockwise until the light of the active switch goes out This way the panel will maintain that room temperature constant Only for HI FLOOR DESIGN PLUS please check the timer switch state if it is on O the convector can t start operating if it is on the starting time depends on timer setting If it is on I the convector can be activated through thermostat and power level selection To turn the convector off completely turn the power selector back to 0 and then rotate the thermostat dial anticlockwise until it clicks off Unplug the appliance if it will not be used for a while V 05 11 9 OPERATING TIMER HI FLOOR DESIGN PLUS model The model HI FAN DESIGN PLUS is also equipped with 24 hours timer which has 96 segments each of which corresponds to 15 minutes of time and allows the lighting and working programming of during the 24 hours Red switch on OFF Red switch on Timer ON The convector doesn t work It allows you to program the convector on and off timing2. put the appliance away when still hot Always wait for it to cool down INFORMATION ON PROPER DISPOSAL OF THE APPLIANCE IN COMPLIANCE WITH EUROPEAN DIRECTIVE 200 94 EC When this appliance reaches the end of its useful life it must not be disposed of together with household waste but must be delivered to appropriate separate waste disposal plants or to dealers that provide similar service Separate waste disposal of electrical and electronic appliances prevents possible negative effects on the environment and human health resulting from inadequate disposal and also allows for recovering and recycling the materials comprising the appliances to ensure significant saving in terms of energy and resources The separate disposal obligation is underlined by the crossed out dustbin symbol appearing on the product Illegal disposal of the product by the user shall determine the application of the administrative sanctions defined by the regulations in force improve your life V 05 11 www argoclima com 10
3. the convector e Turn the appliance off if unattended in order to avoid accidents e f the convector is not used for prolonged periods disconnect the plug replace the convector in its box and store it in a dry ventilated place e Ensure that the air inlet outlet are not close to walls or curtains when the convector is in use so as to avoid obstructing the convector and hampering its efficiency e Should you hear an abnormal noise or detect an unusual smell when using the convector cease use and unplug immediately e Do not expose the elderly or children to a continuous flow of air e Do not use the convector if it has been damaged or dropped WARNING THE ON OFF SWITCH IS NOT THE ONLY MEANS TO DISCONNECT THE POWER SUPPLY ALWAYS PULL OUT THE PLUG FROM THE SOCKET IN THE EVENT OF MAINTENANCE OPERATIONS WHEN MOVING THE PANEL OR WHEN NOT IN USE DESCRIPTION OF PARTS A Power level selector Turbo switch forced ventilation H G o OFF gt 750 W min Il 1250 W med E III 2000 W max an i p SA i A B Thermostat min minimum temperature O max maximum temperature Mi O O D Forced air outlet Turbo feature E Timer 24h HI FLOOR DESIGN PLUS model E ae F Feet J C j G Top grille for air outlet H Carrying handles The convector is available in two different versions HI FLOOR DESIGN Min med max power 750 1250 2000 W Thermostat and power selector with
4. turbo HI FLOOR DESIGN PLUS Min med max power 750 1250 2000 W Thermostat and power selector with turbo and 24h timer V 05 11 8 HOW TO ASSEMBLE THE FEET SUPPLIED The convector is packed without feet These must therefore be assembled before using the appliance To fix the feet supplied to the convector base use the 4 screws provided with the unit taking care to ensure that they are located correctly in the bottom ends of the heater side Ar HOW TO USE THE CONVECTOR Choose a suitable place to position the convector considering the general safety warnings given in the first part of this manual Only use this convector in an upright position Insert the plug into the electrical socket ensuring that voltage is compliant with that specified on the convector data plate Select the desired temperature using Then choose the power level If desired also activate the forced the thermostat turning this knob desired through the power selector ventilation by pressing turbo button clockwise min corresponds to located on the front of the unit minimum temperature and max to Forced ventilation can also be maximum level The convector will start activated to distribute fresh air in operating only if the thermostat is above summer leaving the thermostat and the minimum temperature heating elements off a Y p Thermostat Power selector Tasto TURBO min minimum temperature o
5. CE ELECTRIC CONVECTION HEATER 860 C_O0W LR DESIGN 00 DESIGNATES OPERATING INSTRUCTIONS Read the instructions carefully before operating the convector or carrying out maintenance operations Observe all the safety instructions failure to observe the instructions may lead to accidents and or damages Store these instructions V 05 11 GENERAL SAFETY INFORMATION e Use this convector only as outlined in this manual Any other use not recommended by the manufacturer may cause fire electric shock or injury to persons e Ensure that the mains voltage complies with that indicated on the convector data plate 220 240VAC 50HZz e Remove the convector from its packaging and check that it is in good condition before use Keep any plastic bags away from children e Check the cord and plug before using the convector to ensure that they have not been damaged during transport e This convector is not a toy Children should be adequately supervised to ensure that they do not play with the panel e This convector is not suitable for use by persons including children with reduced physical sensory or mental abilities or without the necessary experience and knowledge unless they are adequately supervised and have been instructed concerning use of the convector by a person responsible for their safety e This convector is designed for domestic use It must not be used for commercial or industrial purposes e Disconnect the mai
6. in the presence of flammable vapours e g in workshops or garages e Do not place the convector above or near another heat source WARNING AVOID COVERING THE CONVECTOR TO PREVENT IT FROM OVERHEATING The symbol below signals the above warning e The convector may cause risk of fire if while in operation is covered by or comes into contact with flammable material including curtains drapery blankets etc KEEP THE CONVECTOR AWAY FROM THESE MATERIALS e Do not insert and avoid accidental insertion of any external objects into the ventilation or discharge outlets as this may lead to electric shock fire or damage the convector e A convector contains parts that generate arcs or sparks It must not be used in potentially dangerous areas such as areas at risk of fire or explosion or areas loaded with chemical substances or humidity e Do not use the convector on soft surfaces such as beds where the grilles may be covered Always stand the convector on a flat stable surface when in operation in order to prevent it from overturning Arrange the cord in such a way that the convector and other objects do not rest on it Do not run the cord under carpets Do not cover the cord with blankets carpets or similar materials Place the cord far away from busy areas or in a place where it cannot be accidentally pulled out e This convector cannot be used in bathrooms laundry rooms next to a shower or swimming pool or in similar indoor environments Ne
7. ns power when the appliance is not used or for cleaning operations e To disconnect the convector set the selector to 0 and remove the plug from the socket Pull on the plug only Do not pull the cord e Avoid placing fingers or foreign objects in the air inlet outlet grilles as this may lead to electric shock or fire and may damage the convector To avoid the risk of fire do not block the grilles or tamper with them in any way while the convector operates e Do not use the convector if the cord or plug is damaged If the power supply cord is damaged it must be replaced by the manufacturer dealer or a similarly qualified person so as to avoid any safety risks e Do not place any objects on the cord and do not bend it During operation the cord must be entirely unwound e It is not advisable to use extension cords as these may overheat and cause the risk of fire Do not use a single extension cord to operate more than one convector e The convector heats up significantly during operation Risk of burn To avoid injury do not allow skin to come into contact with a hot surface Use the handle to move the convector Keep flammable materials such as furniture cushions blankets paper cloths curtains and suchlike at least 1m from the front and back e Do not immerse the cord plug or any other element of the panel in water or other liquids e Do not touch the plug or convector with wet hands e Avoid using the convector in dusty environments or
8. or stop working lace the outer ring on the time you want the convector turn on for example to set the lighting at 8 p m turn the outer ring clockwise until the arrow indicator corresponds to the number 20 Then set the time the heater is required to run by pulling the segments around the outer ring forward appropriate to the running period s required Whereas every rider is 15 minutes to 1 set 1 hour move out 4 riders between 20 and 21 CS When set the heater will operate each day during the times Red Swit MON ki ON 7 se programmed Note the heater must always be plugged into a we Convector worka osi ae power socket the power selector must be in the on position ice S and the thermostat must be suitably set to ensure the J heater will come on regulation The unit will shut off after the set time During the set the J SS operation the unit will still be governed also by the thermostat Legs SS r N B GY a AN no Yj Taw h If you leave the red switch on W the convector will turn 74 Yj ii hy on automatically every day at the same time as long as ge 194 iii A power suppl is connected the power selector is not on 0 6 oy l i and the thermostat is a medium position OVERHEATING SAFETY DEVICE In the event of overheating the convector protection system automatically disables the heating elements turning the appliance off To understand whether it has turned off due to intervention by this
9. system rotate the thermostat switch to maximum temperature max to verify that the thermostat has not simply turned the convector off due to having reached the set temperature Should the appliance not return to normal operation due to the safety device having intervened 1 turn the convector off 2 remove any cause of overheating e g obstacles on the air outlet or intake grille dust deposits in the appliance etc 3 leave the appliance to cool for 15 20 minutes 4 turn the convector on again HOW TO CLEAN THE CONVECTOR e Always unplug and leave the convector to cool before cleaning e Use a damp cloth to clean the convector exterior and remove dust Leave the casing to dry before using the convector again e Do not allow water to enter the convector e Do not use benzene solvents or abrasive compounds to clean the convector as these may damage the casing e Use a vacuum cleaner to remove dust from the air inlet outlet grilles e Ensure that the convector is dry before inserting the plug e Do not use metal tools to clean the convector Any metal fragments that may detach may come into contact with the panel s electrical components and cause a short circuit e In the event of malfunctions or damages always contact an authorised service centre STORING THE CONVECTOR If the convector is not used for prolonged periods it must be stored together with this manual in its original packaging in a cool and dry place Never
10. ver position the convector where it may fall into a bath or other containers of water e Never position the convector on a wet floor e In any case the adjustment knobs must never be accessible by anyone in a bath or shower e Do not position the convector below an electric socket e The socket must be earthed e Do not allow the electric cord to touch the metal structure of the convector when it is hot or in operation in order to avoid the high temperatures ruining the cord e Do not operate the convector outdoors Do not use the convector in front of or near an open window V 05 11 7 WARNING do not use the convector with an external controller or any other external device that activates the convector automatically as there may be a risk of fire if the convector is covered or incorrectly positioned e Upon initial start up the convector may emit a slight harmless smell This smell is a normal effect of the initial heating up of the internal heating elements and should not recur later on e Do not attempt to repair disassemble or modify the convector The convector does not contain parts that can be repaired by the user e Turn the switch off and unplug before carrying out any maintenance work or moving the convector Always unplug from the socket when the convector is not in use WARNING ALWAYS UNPLUG WHEN CARRYING OUT MAINTENANCE WORK OR MOVING THE CONVECTOR e Do not place anything on the convector avoid placing wet garments on
Download Pdf Manuals
Related Search