Cooler Master TPC-812
Contents
1. TPC 812 User Manual Make sure the following items are included If any item is damaged or missing contact your retailer CAUTION Be careful of the sharp edges to avoid injury Keep away from the reach Of children lt 0 AS gt Fan brackets x 2 Back Plate x 1 Retention Plate x 1 UGA 775 LGA 1156 1155 Lqa 2011 1368 eo 2 oO i By By By fess 1 Stick the stand offs around the mounting holes of the motherboard 2 Turn over the motherboard and place the back plate in accordance with the positions of stand offs Tighten up the nuts diagonally at the same time 3 Apply a thin layer of thermal grease onto the surface of the installed CPU 4 Fasten the retention plate onto the cooler 5 Place the cooler onto the surface of CPU Tighten up the screws diagonally at the same time Stand offs x 4 Screws x 4 Stand offs x 4 For nel LGA 2077 only Nut Setter x 1 Ge e 1 Before installation please select the proper type sultable for your CPU platform 3 2 Before use please remove the protective layer on the bottom of the cooler 3 There are three different sets of holes available for Intel sockets LGA 2011 1366 1156 1155 775 A Don t peal off the insulating tape Please adjust the pin and screw position based on your CPU specification The insulating tape should be facing the motherboard Nuts x 4 Thermal grease x 1 Rubber Pads x 4 Silent mode adapter2. ny defect or error in this manual or product The insulating tape should be facing the motherboard Live Help hitto oolermaster com livehelp amp website http www coolermaster com 510006580 GP For the most updated information please visit our official Inno event shall Cooler Master be liable for any special indirect incidental or consequential damages arising from any defect or erro in this manual or product
3. x 1 SSS SN Stick the stand offs around the mounting holes of the motherboard Apply a thin layer of thermal grease onto the surface of the installed CPU Fasten the retention plate onto the cooler Place the cooler onto the surface of CPU Tighten up the screws diagonally at the same time Don t peal off the insulating tape The insulating tape should be facing the motherboard Adjust the retention plate to AMD socket position 1 Stick the stand offs around the mounting holes of the motherboard 1 Attach the fan to the cooler 2 Turn over the motherboard and place the back plate in accordance with the positions of stand offs Tighten up 2 Attach the fan brackets to the fan the nuts diagonally at the same time 3 Depending on your need you could mount 2nd fan to the cooler 3 Apply a thin layer of thermal grease onto the surface of the installed CPU 4 Connect the power cable 4 Fasten the retention plate onto the cooler Note If you connect the fan cable to 3 pin connector on the mainboard the PWM function will not work 5 Place the cooler onto the surface of CPU Tighten up the screws diagonally at the same time LGA 775 Picture for reference only Information in this document is subject to change without notice In no event shall Cooler Master be liable for any special indirect incidental or Don t peal off the Insulating tape consequential damages arising from a
Download Pdf Manuals
Related Search