Koolance VID-AT1-V06
Contents
1. El XANCE VID AT1 V06 Installation Guide v1 0 E Remove the top heat sink and unplug the XT cards The video card should be removed from the chassis in order to install paste from the video chipset RAM modules this cooling device and heat sink CAUTION Removal of the original heat sink my void your manufac A turer s hardware warranty Please consult the manufacturer if unsure and keep all original parts in case of a return RMA Apply fresh thermal paste to the main chipset taking care only to coat the raised center core The outer portion of the chipset and metal frame do not require thermal compound Most ATI Radeon X800 Pro and XT cards are disassembled the same way although your specific model may vary Apply a small amount of thermal paste to all 4 memory chips on top of the card Memory on the card s rear side will not need thermal paste for the VID AT1 V06 The mounting screws on the bottom side should be removed first There may be 3 or more of these on your Radeon card Spread the thermal compound evenly to cover each chip using the paste packet or a piece of thick paper such as a business card Open the VID AT1 V06 enclosure and remove the protective film from the bottom of the chipset cooler Fold the enclosure closed The long screws should fit through both holes in the VID AT1 V06 back plate Finally hand tighten a nut firmly to both primary screws Place the video card2. into the cooling enclosure There are 2 long screws on the enclosure which must be inserted through the card When installing your Radeon card the power supply connection can be inserted through the back of the VID AT1 V06 4 small mounting screws are included with the VID AT1 V0O6 Thread an insulating washer onto each of these NOTE Video card RAM chips are not perfectly flat with one another To make sure your liquid cooler is making the best contact possible for your card remove the cooler and examine the distribution of thermal paste a A missing or inadequate spot might be corrected by further tightening a mounting nut or screw gradually or applying more thermal paste to the chip From the card s back side insert and tighten each of the 4 screws into the remaining mounting holes with a screw driver
Download Pdf Manuals
Related Search