Home

Philips 22PFL4008K 22" Full HD Black

1. Tip To watch a locked channel enter the PIN code when prompted Listen to digital radio If digital radio channels are available you can listen to them They are installed automatically when you install the TV channels 1 While you watch TV press LIST The channel list is displayed 2 Press Ht OPTIONS 3 Select Filter gt Radio then press OK 4 Select a radio channel then press OK Watch connected devices Before you can watch a device connect the device to the TV See Connect your TV gt Connect devices Page 36 Select a device with SOURCE 1 Press 3 SOURCE 2 Select a device then press OK Select a device from the Home menu 1 Press t 2 Select Source then press OK 3 Select the device then press OK To add or manage your connected devices see Connect your TV gt Watch connected devices gt Change device settings Page 45 e Personal Apply your personalised sound settings e Original Settings that suit most environments and types of audio e Movie Ideal settings for movies e Music Ideal settings for listening to music e Game Ideal settings for games e News Ideal settings for spoken audio such as the news Use picture and sound presets Your TV comes with predefined picture and sound settings You can apply these settings or customise them Select your preferred picture settings 1 While you watch TV pre
2. ever expose the TV to rain or water ever place liquid containers such as vases near the TV If liquids are spilled on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have he TV checked before use e ever place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all ever insert objects into the ventilation slots or other openings on the TV ever expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Ensure that the power plug is fully inserted into the power socket Loose power plugs can cause arcing or fire e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing To disconnect the TV from the mains power the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times Risk of damage to the TV Risk of injury to children Two people are required to lift and carry a TV that weighs more than 25kg or 55lbs When stand mounting the TV use only the supplied stand Secure the st
3. Watch connected devices Select a device Before you can watch a device connect the device to the TV See Connect your TV gt Connect devices Page 36 Select a device with SOURCE 1 Press SOURCE 2 Select a device then press OK Select a device from Home menu 1 Press 2 Select Source then press OK 3 Select a device then press OK Update the source list If you add or remove a device update the source list 1 Press SOURCE 2 Press ttf OPTIONS 3 Select Scan connections then press OK 4 Follow the onscreen instructions Change device settings Change the device type You can change the device type to easily access it from the Source menu 1 Press 3 SOURCE 2 Select the device then press Device type 3 Select a suitable device type then press OK Rename a device You can rename a device after it is connected to the TV EN 45 English 1 Press 3 SOURCE 2 Select the connector then press Rename 3 Use the on screen keypad to enter a new name 4 When complete select Done then press OK Reset device settings You can reset the type and name of the device to default settings 1 In the Source menu select the device and press tt OPTIONS 2 Select Original name and icon then press OK Set up EasyLink devices What you can do You can get the most out of your HDMI CEC compliant devices with Philips EasyLink enhanced co
4. What you need Warning This TV complies with the EMC directive only when you use a shielded Cat5 Ethernet cable To connect the TV to your home network or the Internet you need e A universal plug and play UPnP router with a high speed connection to the Internet e An Ethernet cable RJ45 Maximise video display Some subtitles create a separate subtitle bar under the video that limits the video display area To maximise the video display area you can switch on auto subtitle shift The subtitles are then displayed over the video image Switch on auto subtitle shift 1 Press ff 2 Select Setup gt TV settings gt General settings gt EasyLink 3 Select Auto subtitle shift gt On then press OK Connect to a network and the Internet Connect amp 1 Switch on the router and switch on its DHCP setting 2 Connect the router with an Etherne cable to the TV 3 Press ff then select Setup 4 Select Connect to network then press OK 5 Follow the onscreen instructions to install the network 6 Wait for the TV to find the network connection 7 If you are prompted agree to the End User Licence Agreement What you can do For models with NETWORK connector If you connect the TV to a home network with Internet connection you can experience true interactivity and respond directly to the interactive services See Use your TV gt Interactive TV P
5. 5 Follow the onscreen instructions to select other options if any The start menu for channel search is displayed 6 Select Start then press OK 7 Once the channel search is complete select Finish then press OK Tip Press LIST to see the channel list Note When digital TV channels are found the list of installed channels may display empty channel numbers You can rename or reorder these channels EN 26 Install analogue channels You can search and store analogue TV channels one by one Step 1 Select your system Note Skip this step if your system settings are correct 1 While you watch TV press 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual installation gt System then press OK 4 Select the system for your country or region then press OK Step 2 Search and store new TV channels 1 While you watch TV press 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual installation gt Search channel then press OK 4 Find the channel e If you know the channel frequency enter it with the Navigation buttons or Numeric buttons e If you do not know the channel frequency search for the next frequency that has a strong signal Select Search then press OK 5 After you have found the correct channel select Done then press OK 6 Select Store as new channel t
6. field rate 50 60Hz 1920x1080p frame rate 24 25 30Hz 1280x720p frame rate m 50 60Hz MPEG 1 L182 MPEG 1 225 LAACTHEAAG 1802 Doby Digital Plus Dolby Pulse Supported audio video File Extensions Container 1920x1088 25p 30p 501 60i 1920x1088 25p 30p 50i 60i forma Video codec 1920x1088 ts Maximum resolution 25p 30p 50p 60p 60i MPEG 1 L1 amp L2 MPEG 1 2 25 LARCH AAG 1 amp 2 Dobby Digital Dobby Digital Plus Dolby Pulse YouTube 192010801 field rate 50 60Hz 1920x1080p frame rate 24 25 30Hz 1280x720p frame rate 50 60Hz MPEG 1 L182 MPEG 1 2 25 L3 AAC HE AAC V182 Doby Digital Plus by Pulse 1920x1088 25p 30p 50p 60p 60i ism Manifest mpd 1920x1088 25p 30p 50p 60p 60i 1920x1080 field rate 50 1920x1080 ag 25 30Hz 1280x720p frame rate 50 60Hz AACIHEAAC v182 Dobby Digital Plus WMA WMA PRO EN 55 Supported audio video formats Supported audio video Supported audio video Maximum Max Frame Rate Max Bit Rate Media CE File Extensions Container Video codec Maximum pe pan Audio codec us Meda GE Hm YouTube MPEG 4 ASP 1920x1088 25p 30p 50i 60i 30 Yes Yes Yes Yes Yes H264 1920x1088 30 Yes Yes Yes Yes No 1920x1080 field rate 50 60Hz
7. press ttf OPTIONS 2 Select Common interface then press OK 3 Select the CAM provider then press OK EN 49 English 6 Troubleshooting General issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Make sure that the power cable is securely connected When you are turning the TV on off or to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up This does not affect performance The TV does not respond to remote control or TV controls when switched on The TV requires some time to start up During this time the TV does not respond to the remote control or TV controls This is normal behaviour If the TV continues to be unresponsive to the remote control view the remote control sensor through a digital camera if you press any button on the remote control and notice red flickering at the sensor the remote control is working but the TV may need to be checked by Philips Consumer Care This troubleshooting procedure is not applicable to remote controls that are paired wirelessly with the TV When the TV is in standby a start up splash screen is displayed then the TV returns to standby mode This is normal behaviour When the TV is disconnected and reconnected to the power supply the startup scr
8. Advanced gt TV speakers 3 Select an option then press OK e Off Switch off TV speakers e On Switch on TV speakers e EasyLink Switch off TV speakers and stream TV audio to a connected HDMI CEC audio device e EasyLink autostart When a HDMI CEC audio device is connected automatically switch off TV speakers and stream TV audio to the device Change TV audio streaming You can switch audio between TV speakers and a connected amplifier at any time 1 Press Ht OPTIONS 2 Select Picture and sound gt Speakers 3 Select one of the following then press OK e TV On by default Stream TV audio through TV and the connected HDMI CEC audio device until the connected device switches to system audio control TV audio is then streamed through the connected device EN 47 English e Amplifier Stream audio through the connected HDMI CEC device If system audio mode is not enabled on the device audio continues to stream from the TV speakers If EasyLink autostart was selected the TV prompts the connected device to switch to system audio mode Retain picture quality If your TV picture quality is affected by the picture processing features of other devices you can switch on Pixel Plus Link Switch on Pixel Plus Link 1 Press 2 Select Setup gt TV settings gt General settings gt EasyLink 3 Select Pixel Plus Link gt On then press OK
9. Home theatre Connect an HDMI ARC compliant home theatre to the TV with an HDMI cable E Connect the home theatre to the TV with an HDMI cable and a coaxial audio cable Digital Audio Out E ee Connect the home theatre to the TV with a component video cable Y Pb Pr and an audio L R cable p TE EN 41 English Connect the home theatre to the TV with a SCART cable Connect the home theatre to the TV with a composite cable CVBS and an audio L R cable E il tl E OEN up Sion Digital camera Connect the digital camera to the TV with a USB cable eta EN 42 Digital camcorder Connect the digital camcorder to the TV with an HDMI cable d Connect the digital camcorder to the TV with a component video cable Y Pb Pr and an audio L R cable ma e T f E Connect the digital camcorder to the TV with a composite cable CVBS and an audio L R cable D i i E nE M E TO EN 8 English Connect more devices USB storage device i Connect the USB hard drive to the TV with a USB cable Connect the USB flash drive with a USB cable to the TV Computer Connect the computer to the TV with an HDMI cable EN 44 Connect the computer to the TV with a DVI HDMI cable and an audio cable i DVI VGA Connect the computer to the TV with a VGA cable and an audio cable AUDIO IN DVI VGA
10. website at www philips com support On the Philips support website you can also e Find answers to Frequently Asked Questions FAQ e Download a printable PDF version of his user manual e Email us a specific question e Chat online with Philips Consumer Care available in certain countries only Use the Philips connectivity guide An easy to use connectivity guide gives you guidance on how to connect your TV to other devices Visit http www connectivityguide philips com Energy label The European Energy Label informs you on the energy efficiency class of the product The greener the energy efficiency class of this product is the lower the energy it consumes On the label you can find the energy efficiency class the average power consumption of the product in use and the average energy consumption for 1 year You can also find the power consumption values for the product on the Philips website for your country at www philips com TV EN 8 Search the TV forum Your question may have already been answered by the Philips TV community of users Visit www supportforum philips com Contact Philips You can contact Philips Consumer Care in your country for support The number is available in the leaflet accompanying this product or online at www philips com support Before you contact Philips write down the model and serial number of your TV You can find this informat
11. which can be swallowed Keep the battery out of reach of children at all times Risk of overheating e Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure that curtains or other objects never cover the ventilation slots on the TV Risk of injury fire or power cord damage e Never place the TV or any objects on the power cord e Disconnect the TV from the socket and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable Risk of hearing damage e Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures e Ifthe TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting he TV to the power outlet Care e Clean the TV and frame with a soft damp cloth and wipe gently Never use substances such as alcohol chemicals or household cleaners on the TV e To avoid deformations and colour fading wipe off water drops as soon as possible e Avoid stationary images as much as possible Stationary images are images hat remain onscreen for extended periods of time Stationary images include onscreen menus black bars ime displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damag
12. AACIHE AAC V182 mp4 MP4 1920x1080p Dolby Digital Plus MYC frame rate 24 30 gt Yes Yes Yes Yes No 25 30Hz WMA WMA PRO 1280x720 frame rate 50 60Hz wmvavc1 1920x1088 30p 601 30 Yes Yes Yes Yes No MPEG 4ASP 1920x1088 25p 30p 50i 60i 30 MPEG Li812 MPEG Yes Yes No No No pns MKV v18 amp v2 Doby Digital s H264 1920x1088 30 Doby Digital Plus Yes Yes No No No formats File Extensions Container Video codec Maximum resolution Max Frame Rate fps Max Bit Rate Mbps YouTube MPEG 2 1920x1088 25p 30p 501 601 20 MPEG 4 ASP 1920x1088 25p 30p 501 601 20 WMV9NVCI 1920x1088 30p 60i 20 No MPEG 1 L1 amp L2 MPEG 1 2 2 5 L3 AAC HE AAC V182 Doby Digtal Phs Doby Digital WMA WMA PRO No MPEG 4 ASP 1920x1088 25p 30p 50i 60i 4 Divx 3 11 1920x1088 30p 60i 4 MPEG 4 L1 amp 12 MPEG VPS 1920x1088 5 Contains FLV 30 MPEG 4 ASP 1920x1088 25p 30p 50i 60i 20 Divx 3 11 forma 1920x1088 ts 30p 60i 20 MPEG 1 L1 amp L2 MPEG 1 2 25 L3 AAC HE AAC V182 Doby Digital Pls Doby Digita WMA WMA PRO File Extensions Container Video codec Meamum oe Boreas Audio codec us Meda Gi HMG YouTube MPEG 4 ASP 1920x1088 25p 30p 50i 60i 30 Yes Yes N
13. HDMI device and no picture is displayed switch the source from one device to another and back again EN 52 e fthere are intermittent sound disruptions make sure that output settings from the HDMI device are correct e Ifyou use an HDMI to DVI adapter or HDMI to DVI cable make sure that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only You cannot use EasyLink features Make sure that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If an HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted increased or decreased When a HDMI CEC audio device is connected this behaviour is normal USB device content is not displayed ake sure that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation ake sure that the USB storage device is compatible with the TV ake sure that the audio and picture file formats are supported by the TV Audio and picture files on your USB storage device do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback Contact Philips Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to you
14. S Channel yperband Available on certain models only Display and sound Picture Display e Display type LED backlight HD Full HD e Diagonal size 56 cm 22 inches 61 cm 24 inches Aspect ratio 16 9 widescreen e Panel resolution For HD sets 1366 X 768 p For FHD sets 1920 x 1080 p e Picture enhancement Digital Crystal Clear e Perfect Motion Rate PMR 200 Hz EN 54 Sound e Output power RMS 8 W 10 THD e Incredible Surround e Clear Sound e Mono Smart Stereo Secondary audio programming Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 X 720 60 1280 X 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz 1680 x 1050 60 Hz 1920 x 1080 60 Hz Computer formats VGA Resolution refresh rate 640 x 480 60 800 x 600 60 Hz 1024 x 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz 1600 x 1200 60 Hz 1920 x 1080 60 Hz Video formats Resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50Hz 60 Hz 1080i 50Hz 60 Hz 1080p 24Hz 25Hz 30Hz 50Hz 60 Hz Multimedia Note Multimedia file names must not exceed 128 characters Supported multimedia connections e USB Connect only those USB de
15. TV function 14 CH Switch channels 15 Volume Adjust volume 16 amp Mute Mute or restore audio EN 10 Ss r 7 pars 8 tv 18 tf UBTITLE O _ TEXt e 20 17 Colour buttons Select tasks or options The buttons function according to the services offered by the service provider 18 SUBTITLE Switch subtitles on or off 19 0 9 Numeric buttons Select TV channels or enter text 20 TEXT Enable or disable text EasyLink controls If you connect your TV to HDMI CEC enabled devices such as a Blu ray player or home theatre you can control them at the same time with one remote control Simply switch on EasyLink after connection Read more about Easylink in Connect your TV gt Set up Easylink devices gt Control devices Page 47 Watch TV Switch TV on or off Switch the TV on e Connect the TV to the mains outlet and switch on the main power e If the TV is not switched on the standby LED remains off Press on the TV e If the standby LED is lit press on the remote control Note There is a short delay before the TV responds Tip If you cannot find your remote control and want to switch on the TV from standby press any button on the TV Switch TV to standby Press on the remote control The standby LED on the TV switches to red Switch off the TV Press on the TV The standby LED switches to off Note Though your TV consumes very little
16. Unscaled Provide maximum detail for PC Only available when PC mode is selected in the Picture menu e 4 3 Display the classic 4 3 format EN 13 English View programme guide What you can do You can view channel schedules and programme synopses for digital TV channels using programme guides provided by the broadcasters The availability of programme guides is dependent on your broadcaster You cannot view a channel s programme guide information if e the age rating of the channel is equal or higher than the age rating set on your TV e the channel is locked Play multimedia files What you can do You can play videos photos and music on your TV from a USB device connected to the TV From the broadcaster Access broadcaster programme guide 1 Press ff 2 Select TV guide then press OK 3 If you are viewing the programme guide for the first time follow the onscreen instructions to update the guide Customise broadcaster programme guide You can customise the displayed information to e Remind you when programmes start e Display only preferred channels e Change day of display e Schedule recordings of programmes See Use more of your TV gt Record TV shows gt Schedule recordings Page 19 Note Options may vary according to the programme information available from the broadcaster 1 In the programme guide press fH OPTIONS 2 Select
17. an option then press OK e Acquire EPG data Update programme guide information e Change day Select the day to display programme guide e Search by genre Search programmes by genre e All reminders Display a list of all programme reminders EN 14 Play files from USB device If you have photos videos or music files on a USB storage device you can play the files on TV Caution e TP Vision is not responsible if the USB hard drive is not supported nor is it responsible for damage to or loss of data in the device e Do not overload the USB port If you connect a USB storage device that consumes more than 500mA power make sure that it is connected to its own external power supply Browse USB device 1 Connect the USB device to the USB connector on the TV 2 Press SOURCE select USB then press OK 3 Select a file from the content browser then press OK to start play 4 Press the Play buttons to control play 5 Optional To select a different USB device select USB device at the bottom of the TV screen Tips e Select the top bar to filter your files by type e Select Sort to arrange the files by name date or other fields Play options Watch video 1 Select L in the top bar 2 Select a video then press OK 3 Optional To play all the videos in a folder select a video then select Play all e To skip to the next or previous video press CH or
18. chapter or track e OK Start pause or resume play on the connected device activate a selection or access the device menu e ft Display the TV Home menu Switch off connecting devices You can also set the TV to switch off the connecting HDMI CEC compliant devices if they are not the active source The TV switches the connecting device to standby after 10 minutes of inactivity 1 Press ff 2 Select Setup gt TV settings gt General settings gt EasyLink 3 Select Auto switch off devices gt On then press OK Select speaker output If a connected device is HDMI Audio Return Channel HDMI ARC compliant you can output TV audio through an HDMI cable Additional audio cables are not required Make sure you connect the device to the HDMI ARC connector on the TV See Connect your TV gt About cables gt HDMI Page 34 Switch on HDMI ARC 1 Press 2 Select Setup gt TV settings gt Sound gt Advanced gt HDMI 1 ARC 3 Select one of the following then press OK e On Hear the TV audio through the connected HDMI ARC compliant device e Off Hear the TV audio through the TV speakers or through a device connected through the digital audio out connector Note Make sure that all HDMI CEC settings are properly set up on the connected device Set up TV speakers 1 Press 2 Select Setup gt TV settings gt Sound gt
19. energy when it is in standby or switched off does use some energy If you are not going to use the TV for an extended period of time disconnect the TV from the mains plug Automatic switch off You can save energy with this TV s energy efficiency settings which are enabled by default If there is no user interaction such as pressing a remote control button or a control on the TV for four hours the TV will automatically switch to standby To disable automatic switch off 1 While you watch TV press the Green button on the remote control 2 Select Auto switch off then press OK 3 Use the Navigation buttons to make a selection then press OK Increase or decrease the TV volume e Press on the remote control e Press lt J on the TV Mute or restore the TV volume e Press amp on the remote control to mute the volume e Press amp again to restore the volume Adjust headphone volume 1 Press 2 Select Setup gt TV settings gt Sound gt Headphone volume then press OK 3 Select a level Adjust TV volume emer 3 gt c Switch TV channels e Press CH on the remote control or TV e Press the Numeric buttons to enter a channel number Manage favourite channels You can view all channels or only a list of your favourite channels Create a list of your favourite channels Press LIST The channel list is
20. gaming Game settings Picture setting for games You can optimise the TV display for gaming without picture lag 1 Press ff 2 Select Setup gt TV settings gt Picture then press OK 3 Select Game or computer gt Game Sound preset for games You can optimise sound effects for gaming 1 Press tt OPTIONS 2 Select Picture and sound gt Sound style gt Game then press OK The TV is ready for gaming Note When your gaming session ends switch back to your usual sound setting Text options 1 While you view text press ttf OPTIONS 2 Select an option e Freeze page Unfreeze page Freeze or unfreeze the current page e Dual screen Full screen Enable or disable dual screen text Dual screen displays both the current channel and he text broadcast on two halves of the TV screen e T O P overview Table Of Pages T O P text broadcasts allow you to jump from one subject to another without entering page numbers e Enlarge Normal view Zoom in on he page Press the Navigation buttons o move around the enlarged view e Reveal Hide or reveal hidden information on a page such as solutions o riddles or puzzles e Cycle subpages If subpages are available each is shown automatically e Language Switch to a different language group to correctly display different character sets e Text 2 5 View text with more colours and better graphics than normal
21. home network 39 home theatre connect 34 install channels automatic 23 nteractive TV 14 ntemet connect 39 K ensington lock 5 key beep 27 EN 58 L language menu 26 language subtitles 26 lock TV 5 M mode home or shop 27 Multimedia Home Platform MHP 14 multimedia play files 13 multimedia play options 13 multimedia supported formats 44 N network settings 40 network connect 39 network TV name 40 O online forum 8 P parental rating 21 pause TV 16 pause TV USB hard drive 16 PC display resolutions 44 picture format 12 picture settings 22 picture settings reset 23 U ixel Plus link 39 placement stand or wall 5 placement tips 5 play USB files 13 power specifications 44 presets picture and sound 12 product support 8 programme guide broadcaster 13 R rear controls 9 record TV one touch 18 record TV USB hard drive 17 record TV programmes 17 recorder connect 32 recordings delete 19 recordings schedule 18 recordings watch 19 recycle 7 reinstall 28 remote control 9 rename channels 11 rename connected device 37 safety 4 satellite add or remove 26 satellite install channels 25 satellite settings 25 SCART 29 schedule recordings 18 screen care 5 sensors 9
22. touch recording You can record the programme you are currently watching with a single button 1 While you watch TV press Recording starts immediately A pop up window is displayed indicating the end time of the programme 2 Optional Use the Navigation buttons to mark the end time of the recording 3 Select Confirm then press OK 4 To stop recording press lil Note e While recording you cannot switch TV channels or pause a TV broadcast e If TV guide information is not available a default time of 30 minutes is set for recording You can change this if needed Schedule recordings View programme information Depending on the status of a programme you can start watching it or schedule to record the programme 1 Press ff 2 Select TV guide 3 Select a channel and programme then press OK The programme information is displayed Note If you schedule recordings while you are away make sure that you leave the TV in standby and keep the USB hard drive switched on EN 19 English Schedule a TV programme recording You can schedule a recording of an upcoming programme that will be broadcast today or in up to eight days time You can also schedule a timed recording that is not linked to any programme if programme guide information is not available 1 Press f then select TV guide 2 Select the channel and programme to record 3 Optional To record a programme that will be bro
23. transponder which can include several channels select Frequency and set the frequency 5 Select Search then press OK 6 If a new frequency is found press Store to add the new transponder with its channels Update satellite channels 1 While you watch TV press 2 Select Setup gt Search for satellite gt Update channels 3 Follow the onscreen instructions to complete the installation 4 Once complete select Finish and then press OK Add and remove satellites You can add or remove satellites at any time and install channels from new satellites Note Before you add satellites make sure that the connection type is correct See Change your TV settings gt Satellite Settings gt Install satellite channels Page 29 1 Press t 2 Select Setup gt Search for satellite then press OK 3 Select Add satellite then press OK The TV searches for a satellite on the first free LNB This can take several minutes 4 If no satellite is found check the antenna connections and the position of the dish antenna then select Search again 5 If you are satisfied with the added satellite select Next to install all channels from the satellite The installation can take several minutes Remove a satellite 1 Press 2 Select Setup gt Search for satellite gt Remove satellite then press OK 3 Select the satellites you want to remove then select Remove and
24. type as indicated by the suffix H K T D 00 in the model name e The same settings for satellite channels including the number of LNB satellites e The same hardware type as indicated by the sticker on the back of the TV For example TPM10 3E LA e Compatible software versions Note If you are prompted to enter a code enter 8888 EN 27 English Step 1 Check the country setting 1 Switch on the first TV with the channels that you want to copy to the second TV 2 Press f 3 Select Setup gt Search for channels gt Reinstall channels then press OK The country menu is displayed 4 Make a note of the current setting 5 Press D 6 Press Cancel to exit Step 2 Copy channel list to USB 1 Connect a USB storage device to the first TV with the channels installed on it 2 Press ff 3 Select Setup gt Channel settings or Satellite settings 4 Select Channel installation gt Copy channel list gt Copy to USB then press OK The channel list is copied to the USB storage device 5 Disconnect the USB storage device Step 3 Copy channels to a TV with no channels installed 1 Switch on the second TV on which you want to copy the channel list Initial installation starts 2 Follow the onscreen instructions and select the same country as the TV whose channel list you want to copy 3 Skip the search for channels 4 Connect the USB storage device 5 P
25. unlock channels 1 In the child lock menu select Channel lock 2 Enter the child lock code with the Numeric buttons 3 Select the channels to lock or unlock Restart the TV to activate the lock Parental rating You can set your TV to display only programmes with age ratings lower than your child s age This restriction only applies to digital channels from broadcasters that rate their programmes according to age 1 Press ff 2 Select Setup gt Channel settings or Satellite settings 3 Select Child lock gt Parental rating You are prompted to enter the child lock code 4 Enter the child lock code with the Numeric buttons 5 Select an age rating then press OK All programmes above the selected age rating are blocked For information on child lock codes see Use more of your TV gt Set locks and timers gt Child lock Page 23 EN 23 English 4 Change your TV settings Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant which demonstrates the effect of your chosen setting immediately 1 While you watch TV press 2 Select Setup gt Quick picture and sound settings then press OK 3 Select Continue then press OK 4 Follow the onscreen instructions to choose your preferred settings More picture settings You can change the settings in the Picture menu 1 Press ff 2 Select Setup g
26. user manual TP Vision Netherlands B V hereby offers to deliver upon request a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences This offer is valid up to three years after product purchase to anyone in receipt of this information To obtain source code please send your request in English with product number to Intellectual Property Department TP Vision Netherlands B V P O Box 80077 5600 KA Eindhoven The Netherlands Trademarks and copyrights Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries EN 6 DOLBY DIGITALPLUS Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries K Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world DIVX HD Covered by one or more of the following U S patents 7 29 5 673 7 460 668 7 515 710 7 519 274 Divx DivX Certified and associated logos are
27. watching TV press the Green button and select Screen off e Low standby power The advanced power circuitry reduces the power consumption of the TV to an extremely ow level without losing the constant standby functionality Recycling Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products EN 7 English Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health Help and support Use Help To access the onscreen Help menu press the Blue button To exit from the Help menu press f Visit the Philips website If you can t find what you need in the onscreen Help visit the Philips support
28. 4 child lock 21 CI 40 clock 20 codecs supported 44 Common Interface 40 Conditional Access Module 40 connect computer 36 connect digital camcorder 35 connect digital camera 35 connect disc player 30 connect external hard disk 36 connect game console 33 connect home network 40 connect home theatre 34 connect Internet 39 connect recorder 32 connect TV receiver 31 connect USB device 36 connected device rename 37 connectivity 46 connectivity guide 8 connectors 29 contact Philips 8 controls 9 CVBS composite video 29 D demo 27 devices watch 37 digital camcorder 35 digital camera 35 digital channels install 24 digital channels subtitles 26 digital radio 11 Q isc player connect 30 display resolutions 44 display specifications 44 DivX VOD 14 DTVi 14 E EasyLink 38 EN 5 English EasyLink controls 38 EasyLink enable 38 EasyLink features 38 EasyLink onscreen control 10 EasyLink remote control 38 EasyLink TV speakers 39 Energy label 7 energy efficient settings 6 EPG broadcaster 13 external hard disk 36 F favourite channels list 11 G game console connect 33 game settings 19 H bbTV 14 DMI 29 DMI ARC 29 hearing impaired access 27 help onscreen 7 Help version 46 home mode 27
29. CH e To pause the video press OK Press OK again to resume playback e To skip forward or backward 10 seconds press gt or 4 e To search forward or backwards press PP or 44 Press the button repeatedly to toggle between different speeds e To stop the video press ll Video options While you play video press tt OPTIONS then press OK to select an option e Subtitles Select the available subtitle settings e Subtitle language Select the language for subtitles if available e Character set Select the correct character set for the subtitles e Audio language Select an audio language e Repeat Select Repeat to play the video file repeatedly or Play once to play the video file once e Shuffle on Shuffle off Enable or disable random play of video files e DivX VOD Display the DivX registration and deregistration codes for this TV Note To view information about a video for example played position duration title or date select the video then press INFO To hide the information press INFO again Listen to music 1 Select JI in the top bar 2 Select a track then press OK 3 Optional To play all the tracks in a folder select a track then select Play all e To skip to the next or previous track press CH or CH e To pause the track press OK Press OK again to resume playback e To skip forward or backward 10 seconds p
30. Daylight saving time then press OK Set the clock manually You can set the date and time manually Before you start set the clock mode to Manual 1 In the Clock menu select Date or Time then press OK 2 Set the time or date with the Navigation buttons 3 Select Done then press OK Note If you access the channels from the channel list you are prompted to enter your lock code Sleep timer You can switch the TV to standby after a specified time During the countdown to the specified time you can switch off your TV earlier or reset the sleep timer 1 Press ff 2 Select Setup gt TV settings gt General settings gt Sleep timer 3 Select the sleep timer duration The sleep timer can be set up for to 180 minutes To switch off the sleep timer set it to zero minutes 4 Press OK to activate the sleeptimer After the specified time the TV switches to standby Child lock To protect children from unsuitable TV programmes you can lock the TV or block age rated programmes Set or change the child lock code 1 Press ff 2 Select Setup gt Channel settings or Satellite settings gt Child lock 3 Select Set code or Change code 4 Enter the code with the Numeric buttons Tip If you access the channels from the channel list you are prompted to enter your lock code If you forget your code enter 8888 to override any existing codes Lock or
31. G HP Multimedia Home Platform e DTVi Digital TV interactive Visit the broadcaster s website for more information to see which interactive system is available in your country Here are some examples of interactive activities you can enjoy e View information about TV programmes e Take part in a quiz or competition e Play games e Shop online e Pay for a video on demand VOD programme e Vote e Chat What you need To enjoy this service you need e Digital channels with interactive services e Awired home network connected via a Universal Plug and Play router uPnP For network connection see Connect your TV gt Connect to a network and the Internet Page 48 What you can do For certain models only With interactive TV you can view additional information or entertainment pages provided by digital TV broadcasters You can experience true interactivity by responding directly to the digital content Note You cannot download files to your TV with this feature Broadcasters use various interactive TV systems such as EN 16 Access interactive TV You can identify channels that offer interactive services by a message that invites you to press the Red button or OK to access an interactive programme 1 Switch to a digital channel with interactive services While the application is loading a blinking symbol is displayed When the application has loaded an icon i
32. N AUDIO LR a TR Connect the disc player to the TV with a composite cable CVBS and an audio L R cable E ii mE nE a7 EN 36 TV receiver Connect the satellite or digital TV receiver to the TV with an antenna cable For certain models only aa a A ae eo a es F IN aii Connect the satellite or digital TV receiver to the TV with an HDMI cable Connect the digital TV receiver to the TV with a component video cable Y Pb Pr and an audio L R cable nE uE n o i u mE 33 EN 37 English EN Connect the digital TV receiver to the TV with a SCART cable Connect the digital TV receiver to the TV with a composite cable CVBS and an audio L R cable Video recorder Connect the recorder to the TV with an antenna cable FRE g C O ar TV ANTENNA 38 Connect the recorder to the TV with a component video cable Y Pb Pr and an audio L R cable a os Connect the recorder to the TV with a SCART cable lt ser Connect the recorder to the TV with a composite cable CVBS and an audio L R cable J i a EN 39 English Game console Connect the game console to the TV with an HDMI cable amp Connect the game console to the TV with a component video cable Y Pb Pr and an audio L R a Connect the game console to the TV with a composite cable CVBS and an audio L R cable EN 40
33. N V and are used under license from Koninklijke Philips Electronics N V 2013 TP Vision Netherlands B V All rights reserved www philips com
34. R and plays high quality DivX Video On Demand videos To play DivX VOD videos from a video store or from your computer you must first activate DivX VOD on the TV The DivX VOD activation of your TV is free of charge EN 15 English Register the TV Ifthe TV is not yet activated when you start the playback of a rental DivX video the TV displays the DivX registration code to activate this TV To register follow these steps 1 When the TV displays the 8 or 10 digit registration code write down the code and go to http vod divx com 2 Download the DivX player software on your computer and install the software 3 Start the DivX player software and create a DivX Account Click VOD gt Create a DivX Account 4 In the DivX player register the TV with the registration code of the TV Click VOD gt Register a DivX Certified Device 5 When prompted download and save the registration video to a USB flash drive or your connected media server 6 Go to your TV and play the registration video on your TV This completes the registration and activates DivX on your TV Consult the DivX website for detailed support To de register this TV 1 Press SOURCE 2 Select Browse USB then press OK 3 Press Ht OPTIONS select Divx VOD then press OK 4 Follow the onscreen instructions Interactive TV e HbbTV Hybrid Broadcast Broadband TY e iTV Interactive TV MHE
35. Register your product and get support at www philips com welcome 22PFL4008H K T 24PFL4008K T 24PFL40x8H EN User Manual PHILIPS Contents EN 1 Important 3 Safety 3 Care 4 Legal 3 Sustainability 7 Help and support 8 2 Use your TV 9 TV controls 9 Watch TV 10 View programme guide 14 Play multimedia files 14 Interactive TV 16 3 Use more of your TV 17 Pause TV 17 Record TV shows 18 Play games 20 View Text 21 Set locks and timers 22 4 Change your TV settings 24 Picture and sound 24 Channels 26 Satellite settings 28 Language settings 29 Universal access settings 30 Other settings 31 Update software 31 Reset all 33 5 Connect your TV 34 About cables 34 Connect antenna 35 Connect devices 36 Connect more devices 44 Watch connected devices 45 Set up EasyLink devices 46 Connect to a network and the Internet 48 Connect a CAM Conditional Access Module 49 6 Troubleshooting 50 General issues 50 Channel issues 50 Picture issues 51 Sound issues 52 Connection issues 52 Contact Philips 52 Specifications 54 Power and reception 54 Display and sound 54 Display resolutions 54 Multimedia 55 Connectivity 56 Help version 56 Index 57 1 Important Safety Precautions Read and understand all instructions before you use your TV If damage is caused by failure to follow the instructions the warranty does not apply Risk of electric shock or fire
36. USB hard drive use a PC to format it to NTFS or FAT32 system then try again Caution e TP Vision is not responsible if the USB hard drive is not supported nor is it responsible for damage to or loss of data in the device e Formatting removes all data from the connected USB hard drive e The USB hard drive is formatted exclusively for this TV Keep it permanently connected to the TV You cannot access the contents of the USB hard drive from another TV or PC e Do not overload the USB port If you connect a USB hard drive device that consumes more than 500mA power make sure that it is connected to its own external power supply Note e Make sure that the TV and the USB hard drive are switched off e While you are formatting the USB hard drive do not connect other USB devices to the TV 1 Connect the USB hard drive directly to the TV or if you intend to connect other USB devices in future connect the USB hard drive through a USB hub 2 Switch on the TV and the USB hard drive if it has an external power source 3 Switch to a digital TV channel 4 Press Il to start formatting the USB hard drive 5 Follow the onscreen instructions to complete the formatting process Warning The formatting process may take some time Do not switch off the TV or disconnect the USB hard drive until this process is complete Start recording DIEDE Co CD w SOURCE One
37. V settings gt General settings 3 Select Universal access gt On or Off then press OK Subtitles on analogue channels 1 While you watch an analogue TV channel press TEXT 2 Enter the three digit page number of the subtitles page which is usually 888 If available subtitles are switched on Subtitles on digital channels 1 While you watch a digital TV channel press tf OPTIONS 2 Select Subtitles then press OK 3 Select Subtitles off Subtitles on or Automatic then press OK Set audio feedback When you press a button on the remote control or TV you can set the TV to play a beep 1 While you watch TV press ttt OPTIONS 2 Select Universal access gt Key beep gt On then press OK Subtitle language When available you can change the subtitle language for digital channels 1 While you watch TV press ttf OPTIONS 2 Select Subtitle language then select from the available languages and press OK The subtitle language is changed for the specific channel You can set your preferred primary and secondary subtitle languages to display when available EN 30 Hearing impaired access To make sure that a hearing impaired audio language is available press ttf OPTIONS then select Audio language Languages that support hearing impaired audio are indicated with an ear shaped icon Switch on hearing impaired audio and subtitles 1 While you w
38. adcast on another day press Ht OPTIONS select Change day then select another day 4 Select Record A pop up window is displayed 5 Select and change the recording details with the Numeric buttons and Navigation buttons 6 Select Confirm then press OK Change a scheduled recording 1 Press f 2 Select Recordings then press OK A list of scheduled recordings is displayed 3 Select the recording then select Adjust time 4 Change the recording time as needed then select Confirm Cancel a scheduled recording 1 Press 2 Select Recordings then press OK A list of recordings is displayed 3 Select the recording then select Remove The schedule recording is cancelled Sort recordings 1 Press ff 2 Select Recordings then press OK A list of recordings is displayed 3 Press ttf OPTIONS 4 Select an option to sort by name date expiry date or type then press OK Note e Ifa broadcaster limits the number of days that a recording can be viewed after the programme has been broadcast the list of recordings shows he number of days before the recording expires e Ifa recording has expired or if a broadcaster restricts playback the recording cannot be played e Ifa scheduled recording is prevented by he broadcaster or if the recording does not occur as per schedule it is marked as Failed in the recordings list Delete recordings You can view a list of al
39. age 16 EN 48 Network settings TV network name If you have more than one TV in your home network you can rename this TV to give it a unique name 1 Press ff 2 Select Setup gt Network settings gt TV network name then press OK 3 Use the onscreen keyboard or the remote control keypad to enter the name Connect a CAM Conditional Access Module What you can do You can watch scrambled digital TV channels with a Conditional Access Module CAM Once you have inserted the CAM and paid the subscription fees you can watch the programmes This TV supports Cl Common Interface as well as Cl Cl supports premium HD digital programmes with a high level of copy protection Note The applications functions content and onscreen messages depend on the CAM service provider What you need Caution To protect the CAM from damage insert the CAM as instructed Note Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module 1 Switch off the TV 2 Follow the directions printed on the CAM to insert the CAM into the Common Interface slot at the side of the TV Push the CAM in as far as it will go 3 Switch on the TV then wait for the CAM to be activated This takes a few minutes To maintain access to encrypted digital TV channels leave the CAM in the slot Access CAM services 1 After you insert and activate the CAM
40. an upgrade you will not be able to access content that requires the upgrade All other registered and unregistered trademarks are the property of their respective owners Sustainability e Auto switch off To conserve energy set the TV to switch off automatically after a period of inactivity While you watch TV press the Green button and select Auto switch off Then select the period after which the TV switches off e Switch off inactive devices Switch off connected EasyLink HDMI CEC Consumer Electronic Control compliant devices that are inactive While you watch TV press the Green button and select Inactive devices off e Power management An advanced power management helps save the energy consumed by this TV To view how your personalised TV settings affect the TV s relative power consumption press then select Setup gt Watch demos gt Active Control demo Energy efficiency This TV is designed with energy efficient features To access these features press the Green button on the remote control e Energy saving picture settings You can apply a combination of energy saving picture settings While you watch TV press the Green button and select Energy saving Then select the Energy saving picture setting e Screen off If you only want to listen to audio from the TV you can switch off he TV display Other functions continue to operate normally While you are
41. and to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount TP Vision Netherlands B V bears no responsibility for improper wall mounting that result in accident injury or damage f you need to store the TV disassemble the stand from the TV ever lay the TV on its back with the stand installed Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on he back of the TV Never connect the TV to the power outlet if the voltage is different Parts of this product may be made of glass Handle with care to avoid injury and damage Follow these precautions to prevent the TV from toppling over and causing injury to children Never place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over the edge of the surface EN 3 English e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries e The product remote control may contain a coin type battery
42. ant to install TV channels See Change your TV settings gt Automatic installation Page 26 for instructions on installing analogue or digital channels If you want to install satellite TV channels see Change your TV settings gt Satellite settings Page 28 No digital channels were found during the installation e See the technical specifications to make sure that your TV supports DVB T DVB C or DVB S in your country e Make sure that all cables are properly connected and that the correct network is selected Previously installed channels do not appear in the channel list Make sure that the correct channel list is selected You want to rearrange or reorder the channel list After channels have been installed they appear in the channel list For information about managing channel lists including rearranging channels see Watch TV gt Manage channel lists Page 12 Picture issues The TV is on but there is no picture or the picture is distorted e Make sure that the antenna is properly connected to the TV e Make sure that the correct device is selected as the display source e Make sure that the external device or source is properly connected There is sound but no picture Make sure that the picture settings are set correctly There is poor TV reception from an antenna connection ake sure that the antenna is properly connected to the TV e Loud speakers unearthed aud
43. ard audio format MPEG e Advanced Receive advanced audio formats if available AAC Dolby Digital or Dolby Digital Plus Analogue channels If an analogue TV channel broadcaster streams stereo audio in multiple formats you can select an audio format 1 Press ff 2 Select Setup gt Channel settings or Satellite settings gt Mono Stereo 3 Select a setting then press OK EN 25 English Reset picture and sound You can restore the default picture and sound settings while the channel installation settings remain the same 1 While you watch TV press 2 Select Setup gt TV settings gt General settings gt Factory settings then press 3 Select Reset then press OK All TV settings except for channel settings are reset to the default factory settings Channels Automatic installation When the TV was switched on for the first time a full installation of channels was performed To change your language country and reinstall all available TV channels you can run this full installation again Start installation Note If you are prompted to enter a code enter 8888 1 Press ff 2 Select Setup gt Search for channels gt Reinstall channels then press OK 3 Select your country then press OK 4 Select your network then press OK e Antenna DVB T Access free to air antenna transmissions e Cable DVB C Access cable transmissions
44. atch TV press tt OPTIONS 2 Select Universal access gt Hearing impaired 3 Select a setting then press OK e Off Switch off hearing impaired features e On Switch on hearing impaired audio and subtitles Visually impaired access To make sure that a hearing impaired audio language is available press tf OPTIONS then select Audio language Languages that support visually impaired audio are indicated with an eye shaped icon Select speakers or headphones You can choose to hear the visually impaired audio through the TV speakers headphones or both 1 While you watch TV press tt OPTIONS 2 Select Universal access gt Visually impaired 3 Select a setting then press OK e Speakers Hear visually impaired audio from speakers only e Headphones Hear visually impaired audio from headphones only e Speakers headphones Hear visually impaired audio from speakers as well as headphones e Off Switch off visually impaired audio Note If the EasyLink remote control is switched on you cannot select the Green button To switch off EasyLink see Connect your TV gt Set up EasyLink devices gt What you need Page 46 Change volume for visually impaired audio 1 While you watch TV press tt OPTIONS 2 Select Universal access gt Mixed volume 3 Press the Navigation buttons to change the volume then press OK Audio effects 1 Press f 2 Select Setup gt C
45. ayback speed press 44 or gt gt repeatedly e To watch the live TV broadcast press Oo Note If a recording is in progress you cannot pause the TV broadcast The stored broadcast on the USB hard drive is deleted if you e Disconnect the USB hard drive e Switch the TV to standby e Start recording a TV programme e Switch to another channel e Switch source to watch from a connected device a Blu ray disc player or digital receiver EN 18 Record TV shows What you can do If your TV can receive programme guides you can record TV programmes onto a USB hard drive You can record both current TV programmes as well as future TV programmes Note e Recording is only supported in countries with programme guides e In Nordic countries the TV provides limited support for subtitles while recording TV programmes What you need e Tune your TV to receive digital TV channels such as DVB broadcasts See Change your TV settings gt Channels gt Automatic installation Page 26 e Connect a USB 2 0 compatible hard drive with a minimum capacity of 32 GB and a minimum transfer speed of 30 megabits per second For optimal performance use a hard drive with 250 GB of disk space You can use the same USB hard drive to record and pause TV shows Install USB hard drive To record TV shows you must connect a USB hard drive to the TV and format it If the TV does not recognise the
46. cess the contents of the USB hard drive from another TV or PC e Do not overload the USB port If you connect a USB hard drive device that consumes more than 500mA power make sure that it is connected to its own external power supply Note e Make sure that the TV and the USB hard drive are switched off e While you are formatting the USB hard drive do not connect other USB devices to the TV 1 Connect the USB hard drive directly to the TV or if you intend to connect other USB devices in future connect the USB hard drive through a USB hub 2 Switch on the TV and the USB hard drive if it has an external power source 3 Switch to a digital TV channel 4 Press Il to start formatting the USB hard drive 5 Follow the onscreen instructions to complete the formatting process Warning The formatting process may take some time Do not switch off the TV or disconnect the USB hard drive until this process is complete EN 17 English Pause a live TV broadcast 0755 06 1 On a digital channel press Il to pause a TV programme 2 Press gt to continue watching The status bar shows the following time indicators A When the programme was paused for the first time B Where the paused programme is currently playing C Where the live programme is currently broadcast e To watch the stored broadcast press lt 4 or PP to search backward or forward e To change pl
47. displayed 2 Select the channel to mark as favourite then press tf OPTIONS 3 Select Add remove favourites then press OK The selected channel is marked with an asterisk EN 11 English To remove a channel from the favourites list select Add remove favourites then press OK Display your list of favourite channels 1 Press LIST then press ttf OPTIONS 2 Select List gt Favourites to display channels in the favourite list 3 Press OK to confirm Manage channel lists After the channels are installed you can Filter channels e Switch between antenna and cable channels Rename channels Reorder channels Lock a channel e Listen to digital radio Filter channels 1 While you watch TV press LIST 2 Press tt OPTIONS then select Filter 3 Select an option then press OK e Digital Analogue Display all channels in the channels list e Digital TV channels Display only digital channels e Analogue Channels Display only analogue channels e Free scrambled Display all channels in the channels list e Scrambled channels Display only scrambled channels e Free channels Display only free channels Note The filtering options may vary according to your broadcaster Switch between antenna and cable channels You can switch between antenna and cable channels while you are watching TV 1 While you watch TV press f 2 Selec
48. e Screen e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e Unplug the TV before cleaning EN 4 Placement tips e Position the TV where light does not shine directly on the screen e The ideal viewing distance of this TV is hree times its diagonal screen size For example if the diagonal screen size of he TV is 81 cm 32 the ideal viewing distance is 2 5 m 92 from the front of the screen e While seated your eyes should be level with the centre of the screen TV placement You can apply the best sound settings for your TV by selecting the TV placement wall mount or stand mount 1 Press ff 2 Select Setup then press OK 3 Select TV settings gt General settings or TV placement 4 Select On a TV stand or Wall mounted then press OK Lock the TV Your TV is equipped with a Kensington security slot at the base of the TV To secure the TV purchase a Kensington anti theft lock sold separately lt fi Legal Notice 2013 TP Vision Netherlands B V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners TP Vision Netherlands B V reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believ
49. ed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained TP Vision Netherlands B V warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied TP Vision Netherlands B V cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Terms of warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself e Use the TV and accessories only as intended by the manufacturer e The caution sign printed on the back of he TV indicates risk of electric shock ever remove the TV cover Always contact Philips Customer Care for service or repairs e Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LED product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural proper
50. een is displayed at the next startup To switch on the TV from standby press on the remote control or press any key on the TV EN 50 The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before you reconnect the power cable If the blinking reoccurs contact Philips Consumer Care The TV audio is in the wrong language f you select audio language via tt OPTIONS he TV resets to the default language when you change channels or switch off the TV To retain the selected language change your audio language by pressing then selecting Setup gt Channel settings or Satellite settings gt Languages gt Primary audio language or Secondary audio language The TV or Smart TV menu is in the wrong language Change the menu to your preferred language For more information see Change your TV settings gt Language settings gt Menu language Page 29 You forgot the 4 digit code to unlock the channel blocking feature child lock Enter 8888 You want to upgrade your TV software Visit www philips com support and download the latest software package for your TV Software installation instructions and release notes indicating what s been updated are also available at the site Full instructions on how to upgrade your TV software are also available at Change your TV settings gt Update software Page 31 Channel issues You w
51. ettings or Satellite settings 3 Select Channel installation gt Channel update message 4 Select Off then press OK Switch off automatic updates In the Channel installation menu select Automatic channel update gt Off Update channels manually 1 Press 2 Select Setup gt Search for channels gt Update channels then press OK 3 Follow the onscreen instructions to update the channels Update channel list When the TV was switched on for the first time a full installation of channels was performed By default when there are changes to these channel lists the TV updates them automatically You can also switch off the automatic update or manually update the channels Note If you are prompted to enter a code enter 8888 Automatic update To add or remove digital channels automatically leave the TV in standby mode The TV updates channels and stores new channels everyday Empty channels are removed from the channel list Copy channels ATTENTION This feature is intended for dealers and service personnel You can copy channel lists from one Philips TV to another through a USB storage device You do not need to search for channels or install them again on the second TV The channel list file is small enough to fit on any USB storage device What you need Two Philips TVs that have these properties e The same country setting e The same year range e The same DVB
52. hannel settings or Satellite settings 3 Select Languages gt Visually impaired or Audio effects 4 Select a setting then press OK e On Enable audio effects in the visually impaired audio e Off Disable audio effects in the visually impaired audio Type of speech 1 Press 2 Select Setup gt Channel settings or Satellite settings 3 Select Languages gt Visually impaired or Speech 4 Select a setting then press OK e Descriptive Hear descriptive speech in the visually impaired audio e Subtitles Hear subtitles in the visually impaired audio Other settings TV demo You can watch a demo to find out more about the features on this TV 1 While you watch TV press 2 Select Setup gt Watch demos then press OK 3 Select a demo then press OK Home mode Some TV settings may not be available in Shop mode To make sure that the correct TV settings are applied set the TV to Home mode 1 While you watch TV press 2 Select Setup then press OK 3 Select TV settings gt General settings gt Location 4 Select Home or Shop then press OK 5 Restart the TV Update software Check version 1 Press 2 Select Setup gt Software settings gt Current software inf then press OK The current software version is displayed EN 31 English Caution Do not install a lower version of soft
53. he Navigation buttons to select or highlight items e Press the Colour buttons to select an option then press OK to confirm or activate EN 22 Clock You can display a clock on the TV The clock displays the time that is broadcast by your TV service operator Display the TV clock 1 While you watch TV press ttf OPTIONS 2 Select Clock then press OK The clock is displayed on the top right hand comer of the TV screen Change the clock mode You can change the clock mode to automatic or manual By default it is set to automatic mode which automatically synchronises it to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions change the clock mode to Manual 1 While you watch TV press 2 Select Setup gt TV settings gt General settings 3 Select Clock gt Auto clock mode 4 Select Automatic Manual or Country dependent then press OK Change the time zone In countries with clock transmission data you can change the time zone if Auto clock mode gt Automatic or Country dependent is selected 1 In the Clock menu select Time zone 2 Select your time zone then press OK Set daylight saving time In countries with clock transmission data you can enable or disable daylight saving time if Auto clock mode gt Automatic or Country dependent is selected 1 In the Clock menu select Daylight saving 2 Select Standard time or
54. hen press OK to store the new TV channel Note If the reception is poor reposition your antenna and repeat the procedure Install digital channels If you know the channel frequency of the channels you want to install you can search and store digital channels one by one For best results contact the service provider 1 Press f 2 Select Setup gt Channel settings gt Channel installation 3 Select Digital Reception test gt Search channel then press OK 4 Press the Numeric buttons to enter the channel frequency 5 Select Search then press OK 6 When the channel is found select Store then press OK Fine tune analogue channels If the reception of an analogue TV channel is poor you can fine tune the TV channel 1 Press ff 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual installation gt Fine tune then press OK 4 Press A or W to fine tune the channel 5 When you have selected the correct channel frequency select Done then press OK 6 Select an option then press OK e Store current channel Store the channel under the current channel number e Store as new channel Store the channel under a new channel number Switch off the channel update message If a channel update is performed a message is displayed at startup You can switch off this message 1 Press 2 Select Setup gt Channel s
55. ich limits the video display area To maximise the video display area you can switch on auto subtitle shift and display the subtitles on the video image What you need e Connect an HDMI CEC compliant device to the TV You can connect more than one HDMI CEC device See Connect your TV gt Connect devices Page 36 e Configure each HDMI CEC compliant device properly e Switch on EasyLink Switch on EasyLink 1 Press 2 Select Setup gt TV settings gt General settings gt EasyLink 3 Select EasyLink gt On then press OK Control devices If you connect multiple HDMI CEC devices that support this setting you can control all such devices through the TV remote control Note This is an advanced setting Devices that do not support this setting cannot respond to the TV remote control 1 Press ff 2 Select Setup gt TV settings gt General settings gt EasyLink gt EasyLink remote control 3 Select On or Off then press OK Tips e To switch back to TV control press then select Watch TV e To control another device press then select the device from the Home menu EasyLink buttons You can control HDMI CEC compliant devices with the following buttons on the TV remote control e Switch the TV and the connected device on or to standby e Play buttons Control video or music play e Numeric buttons Select a title
56. io devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e f reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Make sure that the devices are connected properly e Make sure that the picture settings are set correctly The TV did not save your picture settings Make sure that the TV location is set to Home You can change and save settings in this mode The picture does not fit the screen it is too big or too small Change to a different picture format The picture format keeps changing with different channels Instead of the picture format Auto zoom select a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambled You may need a Conditional Access Module to access content Check with your service operator An e sticker banner displaying information appears on the TV display The TV is in Shop mode To remove the e sticker set the TV to Home mode then restart the TV See Change your TV settings gt Other settings gt Home mode Page 31 The computer display on the TV is not stable e Make sure that your PC use
57. ion on the back of your TV or on the TV packaging 2 Use your TV TV controls Rear controls 1 Standby Switch the TV on or off 2 CH Switch to the next or previous channel 3 SOURCE Watch a connected device 4 lt J Volume Increase or decrease volume Sensors and indicators 1 Standby indicator LED and remote control sensor The standby LED indicates when your TV is in standby Point the remote control at the sensor Make sure that the line of sight between the remote control and the TV is not blocked Remote control 1 r lasase PE 3 TEDE EED CZ 4 5 SOURCE TV l Cl 1 O Standby Switch the TV on or to standby 2 Play buttons Control playback of multimedia files 3 2 SOURCE Watch a connected device 4 GUIDE View programme guide 5 TV Watch TV EN 9 English A 7 6 ft Home Access the Home menu 7 OK Confirm an entry or selection 8 AV Navigation buttons Navigate through menus and select items 10 e ag eres FORMAT OPTIONS 9 LIST Access the TV channel 10 amp FORMAT Change the picture format to suit the video source 11 INFO Display information about the current activity 12 ttf OPTIONS Access currently available options picture and sound menus 13 14 t 15 13 Back Return to the previous menu page or exit from a
58. ital broadcast When available the TV can receive software updates through digital broadcasts When a software update is received you are prompted to update the software We strongly recommend that you update the software when prompted Follow the onscreen instructions If you do not update the TV software when the update is received you are prompted to save the update file To update the software later 1 Press t 2 Select Setup gt Software settings gt Local updates 3 Select the file that you downloaded and follow the onscreen instructions to complete the update Reset all You can reset all picture and sound settings and reinstall all TV channels on your TV 1 Press f 2 Select Setup gt TV settings gt General settings gt Reinstall TV then press OK 3 Follow the onscreen instructions EN 33 English 5 Connect your TV About cables Cable quality Before you connect devices to the TV check the available connectors on the device Connect the device to the TV with the highest quality connection available Good quality connectors transfer picture and sound better The connections shown in this user manual are recommendations only Other solutions are possible For more examples visit http www connectivityguide philips com Tip If your device has only composite or RCA connectors use a composite CVBS cable to connect the device to the CVBS Y connecto
59. ite is only available if the TV supports DVB S e To receive satellite channels connect a satellite receiver to the SAT connector on your TV Install satellite channels Reinstall satellites 1 While you watch TV press 2 Select Setup gt Search for satellite gt Reinstall satellites 3 Follow the onscreen instructions to complete the installation 4 Once complete select Finish then press OK Select connection type When you install satellite channels you need to set the connection type The number of LNBs on your dish antenna determines the number of satellite channels you can install 1 While you reinstall satellites select Settings then press OK 2 Select Connection type 3 Select a setting then press OK e 1 satellite Single LNB Select if you have only one LNB e 2 satellites DiSEqC Mini Select if you have 2 LNBs e 3 or 4 satellites DiSEqC 1 0 Select for 3 or 4 LNBs e Unicable for 1 satellite Select if you have a Unicable setup with 1 satellite e Unicable for 2 satellites Select if you have a Unicable setup with 2 satellite Manual installation lf a transponder is skipped during installation you can test the signal strength of a transponder or add a new transponder 1 While you watch TV press 2 Select Setup gt Search for satellite gt Manual installation then press OK 3 Select the LNB 4 If you know the frequency of the
60. l recordings and the remaining USB hard disk space To free up disk space delete recordings 1 Press ff 2 Select Recordings then press OK A list of recordings is displayed 3 Select the recording then select Remove Play games Watch recordings 1 Press ff 2 Select Recordings then press OK A list of recordings is displayed 3 Select a recording from the list then press OK The recording starts to play EN 20 What you can do On this TV you can play standard games in full screen with optimised picture settings for games What you need e Connect your game console to this TV See Connect your TV gt Connect devices gt Game console Page 40 If the TV automatically adds the game console to the Source menu it also applies the game sound preset when you start playing games for certain models View Text Select a page While you watch channels that broadcast text you can view the text 1 Select a channel that broadcasts text then press TEXT 2 Select a page in one of the following ways e Enter the page number with the Numeric buttons e Press CH CH to view the next or previous page e Press the Colour buttons to select a colour coded item Start gaming 1 Press SOURCE 2 Select the game console then press OK 3 If needed load a game disc on the game console then select a game to play 4 Follow the onscreen instructions to start
61. ntrol features Connect your DMI CEC compliant devices through DMI to your TV and control them at the same time with your TV remote control Note Other brands describe HDMI CEC functionality differently Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink After you have switched on Philips EasyLin he following features are available K One touch play When you play an HDMI CEC complian device the TV switches on from standby and switches to the correct source One touch standby When you press on the TV remote control the TV and all HDMI CEC compliant devices switch to standby mode Auto switch off inactive devices Ifa HDMI CEC compliant device has been inactive for some time it switches to standby mode EN 46 EasyLink remote control You can control multiple HDMI CEC compliant devices with your TV remote control System audio control f you connect an HDMI CEC compliant device that includes speakers through the HDMI ARC connector you can choose to hear the TV audio from those speakers instead of the TV speakers Retain picture quality f your TV picture quality is affected by the picture processing features of other devices you can switch on Pixel Plus Link to retain picture quality Maximise display for subtitled video Some video subtitles can create a separate subtitle bar under the video wh
62. o No No 32 3GP H264 1920x1088 25P30p 0P 6p 30 POETENE Aas Yes No No No w QuickTing 30 Yes Yes No No No ETWORK Ethernet LAN RJ 45 For oe certain models only Connectivity e SAT F pin satellite For certain models Rear ay e SERV U Service port Side e AUDIO IN DVI VGA stereo 3 5mm e Cl Common Interface mini jack e USB e VGA PC input DMI e Composite and Audio AV IN eadphones stereo 3 5mm mini jack CVBS Y Audio L R e Component and Audio CVBS Y Pb Pr 5 Audio L R Help version e TV ANTENNA 75 ohm coaxial IEC e DIGITAL AUDIO OUT Coaxial UMv 400812130302 20130507 e HDMI 1 ARC Audio Return Channel e SCART RGB CVBS SCART adaptor EN 56 8 Index A amplifier select output 39 analogue channels fine tune 24 analogue channels install 23 analogue channels subtitles 26 audio language 26 auto subtitle shift 39 Auto switch off devices 38 C cables 29 CAM 40 CAM enable 40 CAM insert 40 channel list 11 channel list copy 24 channels 11 channels favourites 11 channels fine tune analogue 24 channels hide or unhide 11 channels install analogue 23 channels install automatic 23 channels install digital 24 channels install satellite 25 channels logo 11 channels reinstall 28 channels rename 11 channels sort 11 channels switch 11 channels update 2
63. orer Using a file archiver extract autorun upg from the downloaded ZIP file Do not copy or place the extracted file into a folder EN 32 6 For Safari When the download is complete autorun upg is automatically extracted from the ZIP file to your computer Copy the file to the USB flash drive Do not copy or place the file into a folder 7 Eject and disconnect the USB flash drive from the computer Upgrade the TV software Caution e Do not switch off the TV or remove he USB flash drive during the software upgrade e Ifa power failure occurs during the upgrade do not remove the USB flash drive from the TV The TV continues he upgrade as soon as power is restored e If an error occurs during the upgrade retry the upgrade from the beginning If he error reoccurs contact Philips Consumer Care 1 Remove all USB devices such as a Wi Fi adapter from the TV then switch on the TV 2 Connect the USB flash drive to the TV The software upgrade starts automatically The upgrade is complete when a notification message appears on screen 3 Before you restart the TV disconnect the USB flash drive from the TV 4 Press on the remote control do not press more than once The TV switches off then back on again The upgrade is complete 5 To prevent accidental updates to the TV software reconnect the USB flash drive to your computer and delete autorun upg Update from dig
64. press OK Language settings Menu language 1 While you watch TV press 2 Select Setup gt TV settings gt General settings gt Menu language 3 Select a menu language from the list then press OK EN 29 English Audio language If the TV channel broadcasts multiple or dual audio languages you can select your preferred audio language 1 While you watch TV press ttt OPTIONS 2 For digital channels select Audio language For analogue channels select Dual I Il Press OK to confirm your selection 3 Select from the available languages then press OK You can set your preferred primary and secondary audio languages to hear when available 1 While you watch TV press 2 Select Setup gt Channel settings or Satellite settings gt Languages 3 Select Primary audio language or Secondary audio language and select from the available languages 4 Press OK to confirm 1 While you watch TV press 2 Select Setup gt Channel settings or Satellite settings gt Languages 3 Select Primary subtitle language or Secondary subtitle language and select from the available languages 4 Press OK to confirm Universal access settings Switch on Some digital TV broadcasters provide special audio and subtitle features for people who are hearing or visually impaired You can switch these features on or off 1 Press ff 2 Select Setup gt T
65. r TV or void your warranty If are not able to resolve your problem refer to the frequently asked questions FAQs for this TV at www philips com support You can also consult and contribute to the Philips TV community at www supportforum philips com If you wish to speak to or email a Philips representative contact the Philips Consumer Care in your country You can find the contact details in the leaflet accompanying this TV or at www philips com support Note your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging EN 53 English 7 Specifications Power and reception Product specifications are subject to change without notice Power e Mains power AC 220 240 V 50 60 Hz e Standby power consumption lt 0 3 W e Ambient temperature 5 to 40 degree Celsius e For power consumption see the product specifications at www philips com support The power rating stated on the product typeplate is the power consumption for this product during normal household use IEC 62087 Ed 2 The maximum power rating stated between brackets is used for electrical safety IEC 60065 Ed 7 2 Reception e Antenna input 75 ohm coaxial IEC75 e TV system DVB COFDM 2K 8 K e Video playback NTSC PAL SECAM e Digital TV MPEG 4 DVB T Terrestrial DVB T2 DVB C Cable DVB S S2 Satellite e Tuner bands VHF UHF
66. r on the TV Y Pb Pr Component video Y Pb Pr only transmits video For sound also connect to Audio Left Right e he Y Pb Pr connection can handle high definition HD TV signals e Match the Y Pb Pr connector colours to the cable plugs kkk HDMI An HDMI connection has the best picture and sound quality e An HDMI cable combines video and audio signals Connect HDMI for high definition HD TV signals and to switch on EasyLink e An HDMI Audio Return Channel ARC connector allows output of TV audio to an HDMI ARC compliant device e Connect HDMI cables shorter than 5 meters 16 4 feet EN 34 SCART A SCART connection combines video and audio signals SCART connectors can handle RGB video signals but cannot handle high definition HD TV signals k k VGA CVBS a You can connect VGA to display PC content CVBS only transmits video For sound also on the TV ct to Audio Left Right A ee g VGA only transmits video For sound also CVBS connections provide standard picture connect to AUDIO IN quality ps Connect antenna Connect the antenna to the TV o A 5a E a ar TVANTENNA EN 35 English Connect devices Blu ray or DVD disc player Connect the disc player to the TV with an HDMI cable H E m Connect the disc player to the TV with a component video cable Y Pb Pr and an audio L R cable 7 O
67. ress 6 Select Setup gt Channel settings or Satellite settings 7 Select Channel installation gt Copy channel list gt Copy to TV then press OK The channel list is copied to the TV storage device 8 Disconnect the USB storage device EN 28 Step 3 Copy channels to a TV with pre installed channels 1 Switch on the second TV on which you want to copy the channel list 2 Press 3 Select Setup gt Search for channels gt Reinstall channels then press OK The country menu is displayed 4 Make sure that the country setting is the same as for the first TV 5 Press D 6 Press Cancel to exit 7 If the country setting is different reinstall the second TV to match the country setting of the first TV See Change your TV settings gt Reset all Page 33 8 Connect the USB storage device to the second TV 9 Press ff 10 Select Setup gt Channel settings or Satellite settings 11 Select Channel installation gt Copy channel list gt Copy to TV then press OK The channel list is copied to the second TV 12 Disconnect the USB storage device Satellite settings What you can do This TV can receive signals from 4 different low noise block down converters LNBs An LNB is mounted at the end pole of the dish antenna and captures signals from a satellite Note e Satellite reception is available for certain models only Search for satell
68. ress gt or 4 e To search forward or backwards press PP or 44 Press repeatedly to toggle between different speeds e To stop the music press Il Music options While you play music press ttf OPTIONS then press OK to select an option e Repeat Select Repeat to play a track or an album repeatedly or select Play once to play a track once e Shuffle on Shuffle off Enable or disable random play of tracks Note To view information about a song for example title artist or duration select the song then press GJ INFO To hide the information press INFO again View photos 1 Select in the top bar 2 Select a photo thumbnail then pressOK Start a slideshow If there are multiple photos in a folder select a photo then select Slideshow e To skip to the next or previous video press CH or CH e To stop the slideshow or close the photo press LIST or W Slideshow options While you play a slideshow press Ht OPTIONS then press OK to select an option e Shuffle off Shuffle on Enable or disable random display of pictures in the slideshow e Repeat Select Repeat watch a slideshow repeatedly or Play once to watch once e Slideshow time Select the display time for each photo in the slideshow e Slideshow transitions Select the transition from one photo to the next Play DivX VOD Video On Demand This TV is DivX Certified
69. s displayed 2 Press the Red button or OK to launch the interactive application 3 Follow the onscreen instructions and use your remote control to navigate the interactive pages 3 Use more of your TV Pause TV What you can do While you watch a digital channel you can pause a programme to answer a phone call or to have a break The broadcast is stored on a USB hard drive that is connected to the TV You can resume playback of the programme at any time Note e You can pause a programme for a maximum of 90 minutes What you need e Tune your TV to receive digital channels See Change your TV settings gt Channels gt Automatic installation Page 26 e Connect a USB 2 0 compatible hard drive with a minimum capacity of 4 GB and a minimum transfer speed of 30 megabits per second For optimal performance use a hard drive with 32 GB of disk space Install USB hard drive To pause TV you must connect a USB hard drive to the TV and format it If the TV does not recognise the USB hard drive use a PC to format it to NTFS or FAT32 system then try again Caution e TP Vision is not responsible if the USB hard drive is not supported nor is it responsible for damage to or loss of data in the device e Formatting removes all data from the connected USB hard drive e he USB hard drive is formatted exclusively for this TV Keep it permanently connected to the TV You cannot ac
70. s the supported resolution and refresh rate See Specifications gt Display resolutions Page 54 e Change the TV picture format to Unscaled EN 51 English Sound issues There is a picture but sound quality is poor If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction ake sure that all cables are properly connected ake sure that the volume is not muted or set to zero ake sure that the TV speaker setting is selected Press tf OPTIONS select Picture and sound gt Speakers then select TV ake sure that the TV audio output is connected to the audio input on the HDMI CEC enabled or EasyLink compliant home theatre device Sound should be heard from the home theatre speakers e Some devices may require you to manually enable HDMI audio output If HDMI audio is already enabled but you still do not hear audio try changing the digital audio format of the device to PCM Pulse Code Modulation Refer to the documentation accompanying your device for instructions There is a picture but the sound quality is poor Make sure that the sound settings are correctly set Connection issues There are problems with HDMI devices e Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from an HDMI device e If the TV does not recognise the
71. settings assistant 22 settings audio format 23 settings game 19 settings network 40 settings picture 22 settings sound 22 shop mode 27 sleep timer 21 Smart TV network 39 software check version 27 software digital update 28 software USB update 28 sound settings 22 sound settings reset 23 sound specifications 44 source select 12 source update 37 standby 10 standby LED 9 subtitles analog 26 subtitles digital 26 subtitles language 26 sustainability 6 switch TV on off 10 T eletext search 20 ext 2 5 20 ext digital text 20 ext dual screen 20 ext enlarge 20 ext language 20 ext subpages 20 ext Table Of Pages 20 rademarks and copyrights 6 TV controls 9 TV guide broadcaster 13 TV receiver connect 31 TV speakers mute 10 U universal access enable 26 universal access hearing impaired 27 universal access visually impaired 27 update source list 37 USB play files 13 V VGA 30 visually impaired access 27 volume 10 EN 59 English Y YPbPr component video 29 EN 60 PHILIPS All registered and unregistered trademarks are the property of their respective owners Specifications are subject to change without notice Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips Electronics
72. ss tt OPTIONS 2 Select Picture and sound gt Picture style then press OK 3 Select an option then press OK e Personal Apply your personalised picture settings e Vivid Rich and dynamic settings ideal for daytime viewing e Natural Natural picture settings e Standard Default settings that suit most environments and types of video e Movie Ideal settings for movies e Photo Ideal settings for photos e Energy saving Settings that conserve the most energy Select your preferred sound settings 1 While you watch TV press tf OPTIONS 2 Select Picture and sound gt Sound style then press OK 3 Select an option then press OK Change picture format You can change the picture format to suit the video source 1 Press amp FORMAT 2 Select a picture format then press OK The available picture formats depend on the video source e Auto fill Adjust the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC e Auto zoom Enlarge the picture to fill the screen Recommended for minimal screen distortion but not for HD or PC e Super zoom Remove the black bars on the sides of 4 3 broadcasts Not recommended for HD or PC e Movie expand 16 9 Scale 4 3 format o 16 9 Not recommended for HD or PC e Wide screen Shows widescreen format content unstretched Not recommended for HD or PC e
73. t TV settings gt Picture then press OK 3 Select a setting to change then press OK e Picture style Select a predefined picture setting e Restore style Restores the previously selected picture settings e Backlight contrast Adjust the brightness of the display backlight e Colour Adjust the colour saturation of the picture e Sharpness Adjust the sharpness of the picture e Noise reduction Select the amount of noise reduction for the picture e MPEG artifact reduction Smoothen transitions and haziness in the digital picture EN 24 e Pixel Plus HD Digital Crystal Clear Fine tune each pixel to match surrounding pixels and produce a brilliant high definition image Advance sharpness Enable superior sharpness especially on lines and contours in the picture Dynamic contrast Dynamically enhance the details in the dark medium and light areas of the picture Dynamic backlight Select a backlight level to optimise dynamic power consumption and picture contrast Colour enhancement Dynamically enhance the vividness and details of colours e Advanced Access advanced settings such as gamma tint settings and video contrast settings Gamma Adjust the non linear setting for picture luminance and contrast Tint Change the colour balance Custom tint Customise colour balance setting Only available if Tint gt Custom is selec
74. t Setup gt Channel settings gt Channel installation gt Antenna connection 3 Select Antenna DVB T to watch antenna channels or Cable DVB C to watch cable channels then press OK EN 12 Rename channels When you select a channel tts name appears You can change this channel name 1 While you watch TV press LIST The channel list is displayed 2 Select the channel to rename then select ttt OPTIONS 3 Select Rename then press OK The onscreen keyboard is displayed 4 Press the Navigation buttons to select each character then press OK 5 Once complete select Done then press OK to confirm Reorder channels After the channels have been installed you can reorder the channel list 1 While you watch TV press LIST The channel list is displayed 2 Press ttf OPTIONS 3 Select Reorder then press OK 4 Select the channel to reorder then press OK 5 Press the Navigation buttons to move the highlighted channel to another location then press OK 6 Once complete press tt OPTIONS 7 Select Exit reorder then press OK Lock a channel You can prevent unauthorised access to channels by locking them 1 While you watch TV press LIST The channel list is displayed 2 Select the channel to lock then press ttt OPTIONS 3 Select Lock channel then press OK 4 If prompted enter the PIN code The channel is marked with a lock icon in the channel list
75. ted Video contrast Adjust video contrast Brightness Adjust screen brightness Hue Compensate colour variations in NTSC transmissions e Game or computer When viewing content from a connected game console select Game to apply game settings When a computer is connected through HDMI select Computer Make sure that Format and edges gt Picture format gt Unscaled is selected to view maximum detail e Format and edges Access advanced settings to control the display format of the picture Picture format Change the picture format Screen edges Change the picture size Picture shift If available move the position of the picture More sound settings You can change the settings in the Sound menu 1 Press ff 2 Select Setup gt TV settings gt Sound then press OK 3 Select a setting to change then press OK e Sound style Access predefined sound settings e Restore style Restore the last selected predefined sound setting e Bass Adjust the bass level of the speaker and headphones e Treble Adjust the treble level of the speaker and headphones e Surround mode Select a surround sound mode to enhance your audio experience e Auto incredible surround 3D Select a surround sound mode to enhance your audio experience in 3D mode For certain models e Headphone volume Adjust headphone volume e Advanced Access advanced set
76. text If Text 2 5 is broadcast by a channel it is switched on by default EN 21 English Text language For digital TV channels where the broadcasters provide different text languages you can select your preferred primary and secondary languages 1 Press ff 2 Select Setup gt Channel settings or Satellite settings 3 Select Languages gt Primary Text or Secondary Text 4 Select a language then press OK Set locks and timers Subpages If the text page contains several subpages you can view each subpage in succession These subpages are shown on a bar next to the main page number Press or P to select them Search You can search for a word or number that exists on the current text page 1 While you are viewing text press OK to highlight the first word or number 2 Press the Navigation buttons to skip to the word or number to search 3 Press OK to begin the search 4 To exit the search press A until no word or number is highlighted Digital text If a digital TV channel s broadcaster offers dedicated digital text or interactive services you can view digital text Channels such as BBC1 may have digital text with more interactive features Note Digital text services are blocked when subtitles are broadcast and switched on See Change your TV settings gt Language settings gt Subtitles on digital channels Page 30 When in digital text e Press t
77. tings to enhance your audio experience Auto volume levelling Enable the reduction of sudden volume changes for example when switching channels TV speakers Select the preferred speakers to stream audio from the TV See Connect your TV gt Set up EasyLink devices gt Select speaker output Page 47 Clear Sound Enhance sound quality Audio Out format Select the type of audio output through the digita audio output connector Choose between Multichannel and Stereo Audio Out levelling Set the output level for stereo audio Select Less for a certain amount of loss in intensity or signal strength Select More for no loss in intensity or signal strength HDMI 1 ARC Enable audio output from the ARC compliant device connected to the HDMI 1 connector Audio out delay Automatically sync the image on the TV to the audio from a connected home theatre You do not need to use this setting when connecting the TV to a Philips home theatre Audio out offset Adjust the setting for audio output delay Available if Audio out delay is switched on Audio format Digital channels lf a digital TV channel broadcaster streams audio in multiple formats you can select an audio format 1 Press 2 Select Setup gt Channel settings or Satellite settings gt Languages gt Preferred audio format 3 Select an option then press OK e Standard Receive stand
78. trademarks of Rovi Corporation or its subsidiaries and are used under licence DivX video Visi ABOUT DIVX VI Demand VOD registration code vod divx com for DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX is a digital video format created by Divx LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays divx com for more information and software tools to convert your files into DivX videos DEO ON DEMANDB This DivX Certified device must be registered in order to play purchased DivX Video on movies To obtain your locate the Divx VOD section in your device setup menu Go to more information on how o complete your registration PlayReady Final Products Content owners use Microsoft PlayReady content access technology to protect their intellectual property including copyrighted content This device uses PlayReady technology to access PlayReady protected content and or WMDRM protected content If the device fails to properly enforce restrictions on content usage content owners may require Microsoft to revoke the device s ability to consume PlayReady protected content Revocation should not affect unprotected content or content protected by other content access technologies Content owners may require you to upgrade PlayReady to access their content If you decline
79. ty of the display within common industry standards and is not a malfunction CE compliance This product is in compliance with the essential requirements and other relevant provisions of Directives 2006 95 EC Low Voltage 2004 108 EC EMC and 2011 65 EU ROHS Compliance with EMF TP Vision Netherlands B V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals EN 5 English One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing he products Philips is committed to develop produce and market products that cause no adverse health effects TP Vision confirms that as ong as its products are handled properly for heir intended use they are safe to use according to scientific evidence available oday Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Open source This product contains software licensed under an open source licence For acknowledgments and licence texts please refer to the electronic in product
80. vices that consume 500 mA of power or less NTFS FAT 16 Read only FAT 32 Supported audio video formats File Extensions Container Video codec Maximum resolution Max Frame Rate fps e Ethernet LAN RJ 45 For certain models only Supported image files e JPEG jpg jpeg mpo jps e GIF 87a 89a gif e PNG png pns e BMP bmp dib e JPS jps e PNS pns English YouTube MPEG 1 1920x1088 25p 30p 501 60i MPEG 2 1920x1088 25p 30p 501 60i MPEG 4 ASP 1920x1088 25p 30p 50 601 H264 1920x1088 25p 30p 50p 60p 60i No MPEG 1 L1 amp L2 No MPEG 1 2 2 5 L3 AACIHE AAC v18 amp v2 DVD PCM Doby Digital Supported audio video File Extensions Container MPEG 2 1920x1088 25p 30p 50i 601 MPEG 4 ASP 1920x1088 25p 30p 50i 601 H264 1920x1088 25p 30p 50p 60p 60i forma Video codec 1920x1080 field rate 50 60Hz 1920x1080p frame rate 24 25 30Hz 1280x720p frame rate 50 60Hz ts Maximum resolution Max Frame Rate fps Max Bit Rate Mbps MPEG 1 L1 amp L2 MPEG 1 2 25 L3 AAC HE AAC V182 Doby Digital Doby Digital Plus Dolby Pulse YouTube MPEG 2 1920x1088 25p 30p 50i 60i 30 1920x1088 25p 30p 501 60i 30 1920x1088 25p 30p 50p 60p 60i 30 1920x1080
81. ware than the current version installed on your product TP Vision cannot be held liable or be made responsible for problems caused by a software downgrade Update the software through one of these methods e update with USB storage device e update from digital broadcast Update with USB What you need e A USB storage device that has at least 256 megabytes of storage space is FAT or DOS formatted and has its write protection disabled e Access to a computer with a USB connector and Internet access e A file archiver program that supports the ZIP file format for example WinZip for Microsoft Windows or Stufflt for Macintosh Note Do not use a USB hard drive Download the latest software 1 Connect the USB flash drive to your computer 2 On your computer launch a browser such as Internet Explorer or Safari and see www philips com support 3 Find your TV and locate the software and drivers available for your TV set The software upgrade is available as a compressed file zip 4 If the software version is higher than the version on your TV click the software upgrade link 5 Accept the licence agreement and download the ZIP file to the USB flash drive Note Some Internet browsers such as Mozilla Firefox or Google Chrome may download the ZIP file directly to your computer If this happens copy the file to your USB flash drive 6 For Internet Expl

Philips 22PFL4008K 22" Full HD Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 22PFL4008K 22&quot; Full HD Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 22PFL4008K 22" Full HD Black