Digitus DS-55400
Contents
1. HDMI VIDEO EXTENDER User Manual DS 55400 Table of Contents 1 0 TMEFOC UC HO Nis 2 2 0 Specifications 3 0 Package Contents 4 0 Panel Descriptions 5 0 Connection and Dear customer Thank you for purchasing this product For optimum performance and safety please read these instructions carefully before connecting operating or adjusting this product Please keep this manual for future reference 1 0 INTRODUCTION The Extender is based on the HDBaseT technology It extends your HD display with the resolutions of 1080p 60Hz up to 330 feet 100 meters away from your HDMI or DVI D source using one CAT5e 6 cable Built in IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices It also provides POE function that you only need to provide a piece of 48V 1A DC power adapter at the end of the Sender to supply the power both the end of the Sender and Receiver 1 1 FEATURES Support HDCP Support POE Support uncompressed HDMI signal Enables HDMI 10 2Gbps over a single 100m Cat5e 6 cable Support 340MHz 3 4Gbps per channel 102. Blinking it indicates a video content without HDCP When LED is OFF it indicates no video connected 5 HDBaseT Connect the Sender to the Receiver using a Cat5e 6 cable 6 IR Connect Extender infrared receiver cable from this port to receiver the IR command of the source 7 HDMI Out Connect HDMI Sink to this Port 5 0 CONNECTION AND OPERATION 1 Connect the HDMI source such as DVD PS3 STB to the input of Sender 2 Connect the output of Receiver to HDTV display 3 Use a Cat5e 6 cable up to 100m to connect the Sender and Receiver 4 Plug one piece of 48V 1A power supply into the Sender 5 Power on the HDTV display and HDMI source Note It is recommended to use one continuous run Cat5e 6 cable from one end to the other In some cases connecting through a patch connector might not work Attention Insert Extract cable gently 5 1 CONNECTION DIAGRAM External infrared receiver 100m 5 6 Cable External infrared emitter HDMI Source FH 48C 1A Power Supply HDMI Cable
3. 2Gbps all channel bandwidth Support 1080p 60HZ 48bit pixels Support 3D pass through Support CEC pass through Support uncompressed audio such as LPCM Support compressed audio such as DTS Digital Dolby Digital including DTS HD and Dolby True HD e Built in IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices e CAT5e 6 cable follows the standard of IEEE 568B 2 0 SPECIFICATIONS Signal Inputs Output Input Video Signal 1 2 volts p p Output Video HDMI Video format supported DTV HDTV 4801 5761 480 576 720 10801 1080 Transmission distance Cat5e 6 cable 100m for1080p 60Hz Operating Frequency Video Amplifier Bandwidth 3 4Gpbs 340MHz Vertical Frequency Range 50 60Hz Resolutions HDTV Interlaced 50 amp 60HZz 4801 5761 10801 50860 2 480 576 720 1080 Mechanical Size L W H 100x65x25 5MM Weight Net 170G each unit Warranty Limited Warranty 1 Year Parts and Labor Power Requirement Accessories Power Supply 48V DC 1A Power consumption Max 16 8W Regulatory Approvals Converter Unit FCC CE UL Power Supply UL CE FCC AC Power Adapter US standard UK standard and so on User Manual English Version 3 0 PACKAGE CONTENTS Before attempting to use th
4. is unit please check the packaging and make sure the following items are contained in the shipping carton 1 Main unit NO 1 Sender 2 Main unit NO 2 Receiver 3 One piece of 48V DC Power Supply 4 IR Extender infrared receiver X1 5 1 infrared emitter X1 6 User s Manual 4 0 PANEL DESCRIPTIONS Sender Front 1 DC 48V 2 Power Indicator The LED will turn on once the DC 48V provided 3 Link When LED is ON it indicates HDBaseT link connection established between the Sender and the Receiver over the Cat5e 6 cable 4 HDCP When the LED is it indicates a video content with HDCP protection is being transferred When LED is Blinking it indicates a video content without HDCP When LED is OFF it indicates no video connected 5 HDBaseT Connect the Sender to the Receiver using a Cat5e 6 cable 6 IE Connect Extender infrared emitter cable from this port to the HDMI Source to control the source from the viewing location 7 HDMI In Connect HDMI Source to this Port Receiver Front Back 2 Power Indicator The LED will turn on once the 48V Power adapter provided at the end of the Sender 3 Link When LED is ON it indicates HDBaseT link connection established between the Sender and the Receiver over the Cat5e 6 cable 4 HDCP When the LED is it indicates a video content with HDCP protection is being transferred When LED is
Download Pdf Manuals
Related Search