Eizo DuraVision FDX1001
Contents
1. This setting becomes available when a PC is connected to the monitor Please adjust with a PC when display and color adjustments are required 2 Perform Range Adjustment before adjusting Color Mode 16 Chapter3 Settings and Adjustments 3 3 Configure other settings This will configure other settings Setting item setting value Setting Video Aspect Power Save Reverse Crosshair Nomal 100 Configures the display range of the input image overscan Normal Displays the input image with the outmost parts slightly cut off This is how display devices normally display images 100 Displays the entire input image on the screen Because a part of the image which normally gets cut off is displayed as well noise may be visible around the outmost parts depending on the input signal Disable Enable Automatically turns off the power supply if no video signal has been received for 15 minutes during PC or video viewing Off On Displays the image upside down 180 degree rotation Off Fine Circle Displays a crosshair as a reference for the position of the image Broken Line Eine Cirele Broken Line Fine Circle Broken Line o9 When the settings menu is not displayed pressing or switches between displaying and not displaying the crosshair When Fine is Configures the color of the crosshair sele2. L36 1 42 200 7 9 Connector Pin Assignment D Sub mini 15 pin connector 291 11 5 usiiGua 175 6 9 201 7 9 T 88 5 3 48 75 2 95 88 5 3 48 N E D Y T o B LO N E Y a I an oO 9 e o LO o 2 P Ree e laeovoeogorg n No 3 Jauevideo 8 Bue vdeo grouna 13 swe Can oe ve NC No Connection Chapter5 Reference 23 5 3 Glossary Afterimage The Afterimage is particular to LCD monitors When the monitor screen is left on for a long period without use The Afterimage can be removed gradually by changing the displayed image Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use when the analog input signal is converted to a digital signal for image display This is called clock adjustment If the clock pulse is not set correctly some vertical bars appear on the screen Phase Phase means the sampling timing to convert the analog input signal to a digital signal Phase adjustment is made to adjust the timing It is recommended that phase adjustment be made after the clock is adjusted correctly Range Adjustment Range adjustment controls the signal output levels to display every color gradation It is recommended that range adjustment be made before color adjustment Resolut
3. Main unit without stand 252 mm 9 9 inch x 216 mm 8 5 inch x 43 mm 1 69 inch Main unit without stand Approx 2 0 kg 4 4 Ibs Environmental Conditions 20 Chapter 5 Reference Tilt 30 Up O Down Temperature Operating temperature 0 C 40 C 32 F 104 F Storage temperature 20 C 60 C 4 F 140 F Humidity Operating humidity 20 80 R H no condensation Storage humidity 10 80 R H no condensation Pressure Operating 700 hPa 1060 hPa Storage 200 hPa 1060 hPa FDV1001 LCD Panel Size 10 4 inch 260 mm TFT color LCD Surface treatment Anti glare hard coating Viewing angle Horizontal 160 Vertical140 CR 10 or more Display Area H x V 211 2 mm x 158 4 mm Resolution 640 dots x 480 lines Max Display Color Approx 16 2 million colors PC input Video input Power Supply Power Consumption Dimensions Width x Height x Depth Horizontal Scan Frequency Applicable Format NTSC PAL SECAM Input Signal Connector DIN mini 4 pin Pin jack x 1 Input Signal Level DIN mini 4 pin Y 1 0Vp p 75Q C 0 28Vp p 750 Pin jack 1 0Vp p 750 AC adapter AC 100 240VAC 10 50 60Hz 0 2 0 15 A Max Main unit DC 12VDC 10 0 7 A Screen Display On AC adapter AC 10 W or less Main unit DC 9 W or less Power Off AC adapter AC 1 3 W or less Main unit DC 0 5 W or less Main unit 252 mm 9 9 inch x 255 mm 10 inch x 175 m
4. has a fixed life span When the screen becomes dark or begins to flicker contact your local dealer see page 16 Green red blue white dots or defective lt This is due to LCD panel characteristics and is not a dots remain on the screen failure Interference patterns or pressure marks lt Leave the monitor with a white or black screen The remain on the screen symptom may disappear Afterimages appear Afterimages are particular to LCD monitors Avoid displaying the same image for a long time When displaying the same image for extended periods of time please set up the screen saver and or make use of the power saving function When displaying on a PC screen The message below appears This message appears when the signal is not input correctly even when the monitor functions properly This message appears when no signal The message shown left may appear because some is input PCs do not output the signal soon after power on RS Check whether the PC is turned on No Check whether the signal cable is connected properly Si eine The message shows that the input Check whether the signal setting of your PC matches signal is out of the specified frequency the resolution and the vertical frequency settings for the range monitor see page 20 21 Current input signal can be checked in Information Reboot the PC Select an appropriate display mode using the graphics board s utility Refer to the manual o
5. in fire or electric shock Handle the power cord and AC adapter with care Do not place heavy objects on pull or tie the power cord or the AC adapter Use of a damaged 2 cord or AC adapter may result in fire or electric shock Never touch the plug AC adapter or power cord during a thunderstorm Touching them may result in electric shock When attaching an arm stand please refer to the user s manual of the arm stand and install the unit securely Not doing so may cause the unit to become unattached which may result in injury or equipment damage When the unit is dropped please ask your dealer for advice Do not continue using a damaged unit Using a damaged unit may result in fire or electric shock When reattaching the tilt stand please use the same screws and tighten them securely Z WARNING Do not touch a damaged LCD panel directly with bare hands The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth If any part of the skin or body comes in direct contact with the panel please wash thoroughly If some physical symptoms result please consult your doctor N CAUTION Handle with care when carrying the unit Disconnect the power cord and cables when moving the unit Moving the unit with the cord attached is dangerous It may result in injury When handling the unit grip the bottom of the unit firmly withboth hands ensuring the panel faces outward before lifting Dropping
6. monitor referring to the resolution table see below before connecting the PC Compatible Resolutions Frequencies The monitor supports the following resolutions FDX1001 Recommended resolution Set this resolution FDV1001 Display Mode Dot Clock 640 x 480 Apple Macintosh 640 x 480 ula Chapter 2 Connecting Cables 11 usibu3 1 Connect the monitor to the PC with a signal cable that matches the connectors After connecting the cable connectors tighten the screws of the connectors to secure the coupling monitor D Sub mini 15 pin connector D Sub mini 15 pin Signal cable MD C87 optional connector e When using video equipment 1 Connect the monitor to the video equipment with a signal cable that matches the connectors monitor Video equipment S Video cable Commercially available product Oe or M Video cable Commercially available product im S VIDEO 12 Chapter 2 Connecting Cables 2 Plug the power cord of the monitor into a power outlet 1 Connect the power cord to the AC adapter 2 Connect the AC adapter to the Power jack of the monitor and after that connect the power plug to a power outlet ATTENTION This product does not include a power cord Please provide separately a power cord which meets the us
7. the risk of damage and or loss in transit to the local Distributor The Original Purchaser must present proof of purchase of the Product and the date of such purchase when requesting services under the Warranty The Warranty Period for any replaced and or repaired product under this Warranty shall expire at the end of the original Warranty Period EIZO OR DISTRIBUTORS ARE NOT RESPONSIBLE FOR ANY DAMAGE TO OR LOSS OF DATA OR OTHER INFORMATION STORED IN ANY MEDIA OR ANY PART OF ANY PRODUCT RETURNED TO EIZO OR DISTRIBUTORS FOR REPAIR EIZO AND DISTRIBUTORS MAKE NO FURTHER WARRANTIES EXPRESSED OR IMPLIED WITH RESPECT TO THE PRODUCT AND ITS QUALITY PERFORMANCE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE IN NO EVENT SHALL EIZO OR DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL INDIRECT SPECIAL CONSEQUENTIAL OR OTHER DAMAGE WHATSOEVER INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF PROFIT BUSINESS INTERRUPTION LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT OR IN ANY CONNECTION WITH THE PRODUCT WHETHER BASED ON CONTRACT TORT NEGLIGENCE STRICT LIABILITY OR OTHERWISE EVEN IF EIZO OR DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST THE ORIGINAL PURCHASER THE ESSENCE OF THIS PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EIZO AND DISTRIBUTORS ARISING OUT OF THIS L
8. without notice Apple and Macintosh are registered trademarks of Apple Inc VGA is a registered trademark of International Business Machines Corporation Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries VESA is a registered trademark or a trademark of Video Electronics Standards Association in the United States and other countries PC 9801 and PC 9821 are trademarks of NEC Corporation EIZO and EIZO Logo are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries DuraVision is a trademark of EIZO NANAO CORPORATION All other trademarks are the properties of their respective owners 2 NPRECAUTIONS IMPORTANT To ensure personal safety and proper maintenance please read this section and the caution statements on the unit refer to the figure below Location of Caution Statement CAUTION Risk of electric shock Do not open ATTENTION Risque de choc electrique Ne pas ouvrir ACHTUN G Gefahr des elektrischen Schlages R ckwand nicht entfernen 9U EAY VASOS DOT CER RST AMBIT te EFE BD DIRAS do BA rl B EHS CERES Z WARNING If the unit begins to emit smoke smells like something is burning or makes strange noises disconnect all power connections immediately and contact your dealer for advice Attempting to us
9. IMITED WARRANTY AND OR SALES 26 LIMITED WARRANTY H mR iim SRK EGRIGEER Hg Cd Gr VID PBB PBDE x o ni BEC 200 99 it Qr spo XO dp ore dec x 7 cr dodo i o as 0 NECNON DECUIT NA O SJ T 11363 2006 X SJ T 11363 2006 X ELZLI EIZO NANAO CORPORATION 153 Shimokashiwano Hakusan Ishikawa 924 8566 Japan Pho
10. User s Manual ALP Pat DuraVisiotr FDX1001 FDV1001 Color LCD Monitor Important Please read this Users Manual carefully to familiarize yourself with safe and effective usage Please retain this manual for future reference SN ELZLI usiiGua For U S A Canada etc rated 100 120 Vac Only FCC Declaration of Conformity We the Responsible Party EIZO NANAO TECHNOLOGIES INC 5710 Warland Drive Cypress CA 90630 Phone 562 431 5011 declare that the product Trade name EIZO Model DuraVision FDX1001 FDV1001 is in conformity with Part 15 of the FCC Rules Operation of this product is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful i
11. age requirements For the maximum power saving it is recommended that the Power button be turned off Unplugging the power cord completely shuts off power supply to the monitor 2 2 Adjusting the Screen Angle Hold left and right edge of the monitor with both hands and adjust the tilt and swivel to the best condition for working Chapter 2 Connecting Cables 13 usiiGua Chapter 3 Settings and Adjustments 3 1 Basic Operation and Functions Basic operation of Setting menu 7 Displaying Setting Menu Press 0 2 Setting Adjusting When a tab is selected hightlighted in yellow press d or to switch tabs Calar Others Pressing amp or on an item with a numerical value brings up an adjustment menu The Setting menu disappears when the adjustment menu is displayed Brightness 30 Adjust with or and press Select a setting or adjustable item with or 9 and press Pressing on an item with a setting value brings up a selection menu Sharpness Off Select a setting value with or 9 and press O Pressing on Reset will reset all the currently displayed settings to the default configuration Q Press Cancel Select Execute in the confirmation dialog box and press i Pressing on an item without a setting value brings up a more detailed Setting menu Color Others Return Wh
12. binet Clean the cabinet with a soft cloth dampened with a little mild detergent To use the monitor comfortably An excessively dark or bright screen may affect your eyes Adjust the brightness of the monitor according to the environmental conditions Staring at the monitor for a long time tires your eyes Take a 10 minute rest every hour usibu3 CONTENTS COVE TI EEE DEEE EA 1 ANPRECAUTIONS ii 3 Notice for this monitor ee 6 GONE NGS sm 8 Chapter 1 Introduction ss 9 1 1 Features ee 9 1 2 Package Contents esses 9 1 3 Controls and Functions 10 Chapter 2 Connecting Cables 11 2 1 Connection Procedures 11 e When used as a PC monitor 11 e When using video equipment 12 2 2 Adjusting the Screen Angle 13 Chapter 3 Settings and Adjustments 14 3 1 Basic Operation and Functions 14 3 2 Color Adjustment 16 3 3 Configure other settings 17 Chapter 4 Troubleshooting 18 Chapter 5 Reference pe 19 5 1 Attaching an ArM esses 19 5 2 Specifications seein 20 5 3 Glossary susrasa sanan oii ai ad iai 24 5 4 Preset Timing eese 25 LIMITED WARRANT Wren 26 8 CONTENTS Chap
13. cted Black White Red Green When Circle or Broken Line is selected Black White Configures the thickness of the crosshair s lines Off On Sets button press sounds and connection error sounds to on or off Short beep When 9 S or is pressed When an item is selected with When a maximum or minimum value is set with Q or B Long beep When registration is performed with O 2shortbeeps When the Setting menu is displayed and is pressed 4short beeps When there is no input signal When a frequency out of the specified range is received English Configures the displayed Setting menu and message language Reviews the input signals usage time and model name Chapter 3 Settings and Adjustments 17 usibu3 Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies contact your local dealer Common Problems Possible cause and remedy No picture Check whether the power cord is connected correctly Power indicator does not light If the problem persists turn off the power and then turn it on again a few minutes later Power indicator lights blue Check whether the power of the connected device is turned on Switch the input signal Set each adjusting value in Brightness and Contrast to higher level see page 16 The screen is too bright or too dark Adjust using Brightness or Contrast The LCD monitor backlight
14. e a malfunctioning unit may result in fire electric shock or equipment damage Do not open the cabinet or modify the unit Opening the cabinet or modifying the unit may result in fire electric shock or burn Refer all servicing to qualified service personnel Do not attempt to service this product yourself as opening or removing covers may result in fire electric shock or equipment damage Keep small objects or liquids away from the unit Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire electric shock or equipment damage If an object or liquid falls spills into the cabinet unplug the unit immediately Have the unit checked by a qualified service engineer before using it again Place the unit at the strong and stable place A unit placed on an inadequate surface may fall and result in injury or equipment damage If the unit falls disconnect the power immediately and ask your dealer for advice Do not continue using a damaged unit Using a damaged unit may result in fire or electric shock usiiGua AN WARNING Use the unit in an appropriate location Not doing so may result in fire electric shock or equipment damage Do not place outdoors Do not place in a transportation system ship aircraft train automobile etc where it may be affected by strong vibration or shock Do not place in a dusty or humid environment Do not place
15. en done configuring the various items choose Return and press to return to the previous menu 3 Exiting Choose Exit with 4 or O and press 0 NOTE Keeping pressed for 2 seconds will also exit the Setting menu 14 Chapter 3 Settings and Adjustments Functions The settings adjustable in the Setting menu are as shown below The availability of items depends on the input signal N Configurabls Not configurable page 16 Setting adjustable item Color Brightness O Contrast Black Level Sharpness Saturation Hue PC Settings Clock Phase Position Range Adjustment Color Mode Red Green Blue Reset Reset Others Video Aspeci Power Save Reverse Crosshair Beep Language Information page 17 Chapter 3 Settings and Adjustments 15 usibu3 3 2 Color Adjustment This will perform color adjustments Please switch between the input screens you want to adjust and adjust them one by one Adjustable item adjustable value Adjusting Brightness Adjusts the brightness of the backlight Black Level Adjusts the image brightness Off Low High Adjusts the image outlines Range Adjustment Provides automatic adjustment when you want every color gradients displayed Color Mode 1 2 3 Select Color Mode 1 2 3 to adjust the colors of red Red Green 0 128 green and blue in several modes INN factory default factory default excluding PC Settings
16. erminal equipment This product has been adjusted specifically for use in the region to which it was originally shipped If the product is used outside the region it may not operate as specified in the specifications This product may not be covered by warranty for uses other than those described in this manual The specifications specified in this manual are only applicable to signal cables specified by US Use optional products manufactured or specified by us with this product As it takes about 30 minutes for the performance of electrical parts to stabilize adjust the monitor 30 minutes or more after the monitor power has been turned on In order to suppress the luminosity change by long term use and to maintain the stable luminosity use of a monitor in lower brightness is recommended When the screen image is changed after displaying the same image for extended periods of time an afterimage may appear Set up the screen saver and or make use of the power saving function to avoid displaying the same image for extended periods of time Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime Refer to Cleaning on the next page The LCD panel is manufactured using high precision technology However missing pixels or lit pixels may appear on the LCD panel this is not malfunction Percentage of effective pixels 99 99 or higher The backlight of the LCD panel has a fixed li
17. es an attention to be required For example the symbol A illustrates the hazard type such as the risk of electric shock Indicates a prohibited action For example the symbol G illustrates a particular prohibited action such as Do not disassemble Indicates a mandatory action that must be followed For example the symbol e illustrates the notification of general prohibition such as Grounding the unit Using the special functions such as screen size change ex changing the horizontal and vertical ratio of images input for commercial purposes or for the purpose of showing in public may violate copyright laws Product specification may vary with sales areas Confirm the specification in the manual written in language of the region of purchase Copyright 2009 2010 EIZO NANAO CORPORATION All rights reserved No part of this manual may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical or otherwise without the prior written permission of EIZO NANAO CORPORATION EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION s receipt of said information Although every effort has been made to ensure that this manual provides up to date information please note that EIZO monitor specifications are subject to change
18. f the graphics board for details Display position is incorrect Adjust image position using Position see page 16 Vertical bars appear on the screen ora Adjust using Clock see page 16 part of the image is flickering Whole screen is flickering or blurring Adjust using Phase see page 16 Characters are blurred This may occur when a non complying high resolution signal is input Check the PC settings and change the resolution which complies with the monitor 18 Chapter4 Troubleshooting Chapter5 Reference 5 1 Attaching an Arm The stand can be removed and replaced with an arm or another stand to be attached to the monitor Use an arm or stand of EIZO option ATTENTION When attaching an arm or stand follow the instructions of their user s manual When using another manufacturer s arm or stand confirm the following in advance and select one conforming to the VESA standard Use the M4 x 12 mm screws in use by this monitor Clearance between the screw holes 100 mm x 100 mm Thickness of plate 2 6 mm Strong enough to support weight of the monitor unit except the stand and attachments such as cables Use the screws as described below Connect the cables after attaching an arm or a stand Since the monitor and arm are so heavy dropping them may result in injury or equipment damage Do not turn the monitor lengthwise Attachment Procedure 7 Lay the LCD monitor on a soft clot
19. fe span When the screen becomes dark or begins to flicker please contact your dealer Do not press on the panel or edge of the frame strongly as this may result in the display malfunction such as the interference patterns etc If pressure is continually applied to the LCD panel it may deteriorate or damage your LCD panel If the pressure marks remain on the LCD panel leave the monitor with a white or black screen The symptom may disappear Do not scratch or press on the panel with any sharp objects such as a pencil or pen as this may result in damage to the panel Do not attempt to brush with tissues as this may scratch the LCD panel When the monitor is cold and brought into a room or the room temperature goes up quickly dew condensation may occur inside and outside the monitor In that case do not turn the monitor on and wait until dew condensation disappears otherwise it may cause some damages to the monitor Cleaning ATTENTION Never use any solvents or chemicals such as thinner benzene wax alcohol and abrasive cleaner which may damage the cabinet or LCD panel NOTE Optional ScreenCleaner is recommended for cleaning the panel surface e LCD Panel Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper Remove persistent stains gently with a cloth dampened with a little water and then clean the LCD panel again with a dry cloth for better finishing e Ca
20. h spread over on a stable surface with the panel surface facing down 2 Remove the stand Prepare a screwdriver Unscrew the four screws securing the unit and the stand with the screwdriver 3 Attach the monitor to the arm or stand Secure the monitor to the arm or stand using the screws specified in the user s manual of the arm or stand Chapter5 Reference 19 usibu3 5 2 Specifications FDX1001 LCD Panel Surface treatment Anti glare hard coating Viewing angle Horizontal 160 Vertical130 CR 10 or more Size 10 4 inch 260 mm TFT color LCD Dot Pitch 0 2055 mm Display Area H x V 210 4 mm x 157 8 mm Resolution PC input Video input Power Supply Power Consumption Dimensions Width x Height x Depth 1024 dots x 768 lines Horizontal Scan Frequency 24 50 kHz Vertical Scan Frequency 55 75 Hz Non interlace Max Dot Clock 65 MHz Max Display Color Approx 16 7 million colors Input Signal Connector D Sub mini 15 pin x 1 Input Signal Connector DIN mini 4 pin Pin jack x 1 Input Signal Level DIN mini 4 pin Y 1 0Vp p 750 C 0 28Vp p 750 Pin jack 1 0Vp p 750 AC adapter AC 100 240VAC 10 50 60Hz 0 3 0 2 A Max Main unit DC 12VDC 10 0 9A Screen Display On AC adapter AC 13 W or less Main unit DC 11 W or less Power Off AC adapter AC 1 3 W or less Main unit DC 0 5 W or less Main unit 252 mm 9 9 inch x 255 mm 10 inch x 175 mm 6 9 inch
21. in a location where water is splashed on the screen bathroom kitchen etc Do not place in a location where the steam comes directly on the screen Do not place near heat generating devices or a humidifier Do not place in an inflammable gas environment To avoid danger of suffocation keep the plastic packing bags away from babies and children Use the enclose AC adapter The enclosed AC adapter is for use with this product only Do not use the AC adapter with other equipment Connecting to power sources that do not match the power ratings of the AC adapter may result in fire or electric shock Make sure the power cord meets the following requirements This product does not include a power cord Please provide separately a power cord which meets the requirements For more information please contact your dealer The power cord is compatible with the standards of the country and region in which this product is to be used The power cord has a rated value of at least 2 5A Power supply 100 240Vac 50 60Hz To disconnect the power cord grasp the plug firmly and pull Tugging on the cord may damage and result in fire or electric shock 5 OK Use the correct voltage The unit is designed for use with a specific voltage only Connection to another voltage than specified in this User s Manual may cause fire electric shock or equipment damage Power supply 100 240Vac 50 60Hz Do not overload your power circuit as this may result
22. ion The LCD panel consists of numerous pixels of specified size which are illuminated to form images This monitor consists of 1024 FDX1001 640 FDV 1001 horizontal pixels and 768 FDX1001 480 FDV1001 vertical pixels At a resolution of 1024 x 768 FDX1001 640 x 480 FDV1001 all pixels are illuminated as a full screen 1 1 24 Chapter 5 Reference 5 4 Preset Timing The following table shows the factory preset video timing of the PC ATTENTION Display position may be deviated depending on the PC connected which may require screen adjustment using Setting menu Ifa signal other than those listed in the table is input adjust the screen using the Setting menu However screen display may still be incorrect even after the adjustment When interlace signals are used the screen cannot be displayed correctly even after screen adjustment using the Setting menu FDX1001 Applicable Frequency Polarity Resolution i n i i i 2 640 x 480 25 18 31 47 59 94 ne ree 640 x 480 MAC 30 24 35 00 66 67 TRUNG Al de FDV1001 Applicable i Pata A Polarity Resolution 5 Chapter 5 Reference 25 Usll6u LIMITED WARRANTY EIZO NANAO CORPORATION hereinafter referred to as EIZO and distributors authorized by EIZO hereinafter referred to as the Distributors warrant subject to and in accordance with the terms of this limited warranty hereinafter referred to as the Warranty to the o
23. m 6 9 inch Main unit without stand 252 mm 9 9 inch x 216 mm 8 5 inch x 43 mm 1 69 inch Main unit without stand Approx 1 8 kg 4 0 Ibs Movable range Environmental Conditions Tilt 30 Up O Down Temperature Operating temperature 0 C 40 C 32 F 104 F Storage temperature 20 C 60 C 4 F 140 F Humidity Operating humidity 20 80 R H no condensation Storage humidity 10 80 R H no condensation Pressure Operating 700 hPa 1060 hPa Storage 200 hPa 1060 hPa Chapter 5 Reference 21 usibu3 Main default settings factory settings me E co 3 Power Save Enable Outside Dimensions unit mm inch FDX1001 1 69 252 9 9 o R 20 0 79 212 8 3 20 0 79 5 ay I E pu 88 5 3 48 75 2 95 88 5 3 48 amp 2H 9 N 1 m _ o SG as a a m E EE Y 1 glee y TN ES z al o T 1 o X E 4 MK 8 mm 0000000 8 ry co 8 E i X 200 7 9 175 6 9 201 7 9 k 22 Chapter 5 Reference FDV1001 252 9 9 20 0 79 20 0 79 213 8 4 160 6 3 216 8 5 255 10 e 0000000
24. mited Warranty included ATTENTION This product does not include a power cord Please provide separately a power cord which meets the usage requirements Chapter 1 Introduction 9 usiiGua 1 3 Controls and Functions pr KB e Il IF e c s C sessses 3 Setting menu l HS button Switches the input signal Displays the Setting menu fixes the setting or adjustment items on each menu 2 button and saves the setting or adjustment results Used to select the setting or adjustment items or to increase or decrease the adjustment values on each menu 3 OAOD button SOC lt When the settings menu is not displayed pressing or V switches between displaying and not displaying the crosshair 4 button Turns the power on or off Indicates monitor s operation status 5 Power indicator Blue Operating Orange Power off 7 10 Chapter 1 Introduction Chapter 2 Connecting Cables 2 1 Connection Procedures 7 Connects to external equipment compatible with the monitor When used as a PC monitor n eaaa ee page 11 When using video equipment rere treet eaaa page 12 e When used as a PC monitor ATTENTION When replacing the current monitor with an FDX1001 FDV1001 monitor be sure to change the PC settings for resolution and vertical frequency to those which are available for the FDX1001 FDV1001
25. ne 81 76 277 6792 Fax 81 76 277 6793 EIZO EUROPE AB Lovangsvagen 14 194 61 Upplands Vasby Sweden Phone 46 8 594 105 00 Fax 46 8 590 91 575 http www eizo com This document is printed on recycled chlorine free paper 2nd Edition February 2010 Printed in Japan OONOL562B1 U M FDX1001 AL
26. no obligation under this Warranty whatsoever in any of the cases as set forth below a Any defect of the Product caused by freight damage modification alteration abuse misuse accident incorrect installation disaster faulty maintenance and or improper repair by third party other than EIZO and Distributors b Any incompatibility of the Product due to possible technical innovations and or regulations c Any deterioration of display performance caused by the deterioration of expendable parts such as the LCD panel and or backlight etc e g changes in brightness changes in brightness uniformity changes in color changes in color uniformity defects in pixels including burnt pixels etc d Any defect of the Product caused by external equipment e Any defect of the Product on which the original serial number has been altered or removed f Any defect of the Product caused by liquid leaking from battery g Any normal deterioration of the product particularly that of consumables accessories and or attachments e g batteries buttons rotating parts remote control cables User s Manual etc and h Any deformation discoloration and or warp of the exterior of the product including that of the surface of the LCD panel To obtain service under the Warranty the Original Purchaser must deliver the Product freight prepaid in its original package or other adequate package affording an equal degree of protection assuming
27. nterference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna ncrease the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Canadian Notice This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de le classe B est comforme la norme NMB 003 du Canada User s Manual DuraVisiom FDX1001 FDV1001 Color LCD Monitor pani m SAFETY SYMBOLS This manual and this product use the safety symbols below They denote critical information Please read them carefully A WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening A CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and or property or product damage Indicat
28. riginal purchaser hereinafter referred to as the Original Purchaser who purchased the product specified in this document hereinafter referred to as the Product from EIZO or Distributors that EIZO and Distributors shall at their sole discretion either repair or replace the Product at no charge if the Original Purchaser becomes aware within the Warranty Period defined below that the Product malfunctions or is damaged in the course of normal use of the Product in accordance with the description in the instruction manual attached to the Product hereinafter referred to as the User s Manual The period of this Warranty is two 2 years from the date of purchase of the Product hereinafter referred to as the Warranty Period EIZO and Distributors shall bear no liability or obligation with regard to the Product in relation to the Original Purchaser or any third parties other than as provided under this Warranty EIZO and Distributors will cease to hold or store any parts of the Product upon expiration of seven 7 years after the production of such parts is discontinued In repairing the monitor EIZO and Distributors will use renewal parts which comply with our QC standards The Warranty is valid only in the countries or territories where the Distributors are located The Warranty does not restrict any legal rights of the Original Purchaser Notwithstanding any other provision of this Warranty EIZO and Distributors shall have
29. ter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor 1 1 Features 10 4 inch screen Resolution FDX1001 XGA 1024 x 768 display compliant FDV1001 VGA 640 x 480 display compliant Maximum brightness FDX1001 600 cd m FDV1001 450 cd m LED backlight LCD panel The LED backlight provides better power efficiency and reduced power consumption compared to existing fluorescent backlight LCD panels No mercury a hazardous substance is used Analog signal support PC signal D Sub mini 15 pin connector x 1 FDX1001 Horizontal scanning frequency 24 kHz 50 kHz Vertical scanning frequency 55 Hz 75 Hz FDV1001 Horizontal scanning frequency 24 kHz 32 kHz Vertical scanning frequency 56 Hz 70 5 Hz Video signal S Video Video input connector x 1 Applicable Format NTSC PAL SECAM Crosshair display function Displays lines Fine Circle or Broken Line as a reference for the position of the image displayed on the monitor 3 3 Configure other settings page 17 Video aspect function Alters the display range of the input image overscan 3 3 Configure other settings page 17 1 2 Package Contents Check that all the following items are included in the packaging box If any items are missing or damaged contact your local dealer NOTE Please retain the packing materials for future transport of the monitor LCD Monitor AC Adapter Cable Tie User s Manual Li
30. the unit may result in injury or equipment damage Do not install the unit in a closed space If the inerior becomes hot it may result in fire electric shock or damage Do not touch the power plug or AC adapter with wet hands fA Doing so may result in electrical shock fe S N 2 40 Use an easily accessible power outlet This will ensure that you can disconnect the power quickly in case of a problem Mind that the AC adapter becomes hot during use Do not cover or place anything on top of the AC adapter Do not place the AC adapter on top of things that trap heat such as carpets blankets etc Keep the AC adapter away from direct sunlight and heat sources such as heaters Not doing so may result in fire Do not touch with bare hands Doing so may result in burns Do not suspend the AC adapter in midair Using it while suspended in midair may result in fire or electric shock Periodically clean the area around the plug Dust water or oil on the plug may result in fire Unplug the unit before cleaning it Cleaning the unit while it is plugged into a power outlet may result in electric shock If you plan to leave the unit unused for an extended period disconnect the power cord from the wall socket after turning off the power for safety and power conservation Usll6u Notice for this monitor Aside from displaying microscope images this product is also suited to the dedicated usages such as operation of t
Download Pdf Manuals
Related Search