Philips 42HFL5682D 42.143" Black
Contents
1. Forced On When power to the TV is interrupted this function sets the state that the TV will return to when power is restored e f set to Standby the TV will always resume into Standby mode when power is restored default setting e fsetto Last Status the TV will resume to the mode it was in when power was lost e If set to On the TV will always turn on into On mode when power Is restored e f set to Forced On the TV will turn on to On mode but it cannot be turned off For applications where TV is always on and you do not want anyone accidentally turning it off Default setting is Standby e Select Your Keyboard Lock Setting No Yes AI his function enables disables the Keyboard buttons on the TV e f set to No all keys are enabled If set to Yes all keys are locked except for the Power key If set to All then all keys are locked including the Power key e Default setting is No e Select Your RC Lock Settings No Yes his function enables disables the processing of the Guest remote control signals Installer remote control signals will still function regardless of the setting e Default setting is No Smartinstall Initial TV Settings Any CEC Communication e Any CEC Communication Yes No This function enables disables the HDMI CEC functionality available on this TV e Default setting is No smartinstall Initial TV Settings Us2. Background Color Theme This feature enables the customization of the background color of the menus to create a common brand recognition with the hotel property Background Design Theme This feature enables customized background designs to be included and used as the background for User Interface menus Like the Welcome Logo and the Hotel Logo these also need to be in the png format A transparency of lt 65 is recommended For the images and sizes see appendix A Programmable Ul Programmable UI feature This feature is available to those with advanced Flash R Lite R programming capabilities Installer TV Settings Power On Power On Last Status On Standby Forced On Default setting is Standby When power to the TV is interrupted this function sets the state that the TV will return to when power is restored e If set to Standby the TV will always resume into Standby mode when power is restored default setting e If set to Last Status the TV will resume to the mode it was in when power was lost e If set to On the TV will always turn on into On mode when power is restored e If set to Forced On the TV will turn on to On mode but it cannot be turned off for applications where TV is always on and you do not want anyone accidentally turning it off SimartGulde SmartGuide Category SmartGuide Category SmartGuide High Definition Sports
3. PLAY PAUSE Select Play or Pause a picture CC Enables Closed Caption SLEEP Enable Sleeptimer feature SMART FEATURES jennen mmmmumumEmmm Less emme PHILIPS TELEVISION SO 9 OOODY HO Philips Hospitality setup RC2573GR setup remote remote control not included control not included in box in box RC25 3GR is an optional remote control It is used for Philips Commercial Solutions features and SmartCard settings It can be purchased separately 1 Slide this button up to enter into Guest mode or slide this button down to enter into Setup mode 2 E button It has the same function as OK button G RESET UPGRADE e amp POWER RECALL INFO GUIDE RECALL BACK PP OPTIONS TEXT SMART SLEEP ALARM CLOCK it Ui 9 Jg m Ca TELETEXT MDO amp 9 9 o v cc vy P DO oro T 5 SLEEP I RC5 GUEST RC5 SETUP RC6 GUEST RC6 SETUP 00e U JO S 0 00 PHILIPS HOSPITALITY O r o O A gt lt 3 Installation Smart Installation In the 1st time Virgin installation the OSD will instruct you step by step to do the TV installation setting 1 Please Select Your Language Please Select Your Language English x e Choose a language and press to select and proceed to the next step v 2 Smartlnstall Initial Wizard Smartinstall
4. Pull the power lead by the plug do not pull by the wire 9 Ensure the power cord is fully inserted into the TV mains socket and the wall socket 10 If the TV is mounted on a swivel base or swivel arm ensure no strain Is placed on the power cord when the TV is swivelled Strain on the power cord can loosen connections and cause arcing or fire 11 Verify that the mains supply voltage in your location corresponds to the voltage printed on the sticker at the rear of the TV 12 The mains plug or appliance coupler is used as the disconnect device the disconnect device shall remain readily operable 13 An all pole MAINS SWITCH is used as the disconnect device the location on the apparatus and the function of the switch shall be described and the switch shall remain readily operable Important Safety Instructions Read before operating equipment Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades
5. IT TO THE PENDANT CONTROL Safety information and useful tips 1 Two people are required to lift and carry a T V that weighs more than 55 Ib 25 kg Improper handling of the TV can cause serious injury 2 If you place the TV set on a solid surface Ensure the surface is level and that it can withstand the weight of the TV 3 Installing the TV on the wall requires special skill that should only be performed by a qualified personnel You should not attempt to do the work yourself Philips bears no responsibility for improper mounting or mounting that results in accident or injury Make sure that the wall mount is being fixed securely enough so that it meets safety standards 4 This TV is compatible with the VESA wall mounting standard Please contact your local electronics supplier for a VESA compliant bracket to wall mount this TV Before you mount your TV on a wall ensure the wall is surtable to carry the weight of the TV 5 Do not insert the power plug in the wall socket before all connections are made 6 Do not touch any part of the T V power lead or aerial lead during lightning storms 7 Do not leave the TV in stand by mode for an extended period of time Instead disconnect the T V from the mains 8 The TV set is always connected to the mains Disconnection of the TV set can be done by unplugging the mains cord located at the back of TV set or e unplugging the mains plug from the mains socket outlet
6. Mode New Mode Password Convert Store m This function enables TV conversion between a Connected Pro ldiom system and StandAlone Pro ldiom system The conversion mechanism is via a 9 digit keycode obtained from your Philips representative Multi RC supports a maximum of four T Vs in one room Enter the Philips Hospitality setup menu Enter the PPV VOD options and go into the Decryption Control Menu e Key in the TV model and serial number e Set the current mode to Standalone via pressing of OK button Enter the 9 digit Passwod obtained Go to Convert option to decrypt the encrypted digital signal received from a satellite or Pay Per View service 20 Installer TV Settings ES Note This section allows the Installer to customize the TV Default HDMI 1 2 3 Audio enables the customization of performance and general settings the default audio path of the HDMM 2 3 input source VGA can be selected if HDMI1 2 3 is dedicated for PC input where the audio input is via the PC audio in Language English Bathroom speaker volume allows you to configure the volume behavior of the bathroom speaker output If set to Variable the bathroom speaker volume will be identical to the TV loudspeaker volume If set to Fixed the bathroom speaker volume will be fixed at a constant level output Installer TV Settings m Language English Spanish French Sma
7. News Kids Movies Network Adult Hospital Lifestyle Other Education e f you choose yes than you have the further ability to enable disable the available individual categories High Definition Sports News Kids Movies Network Adult Hospital Lifestyle Other Education Categories are Hospital and Education for Healthcare TVs H models or Adult and Other for Hospitality TVs D L F models e Default setting is No 23 Installer TV Settings E gt Glock Setup m Clock Setup e his feature allows the entering of TV channel number that will provide the date and clock information This must be a digital channel containing an STT table almost all digital channels do installer TV Settings Factory Default m Factory Default will reset the factory out of box settings VN Warning here is no confirmation request if you press right arrow here all programming is immediately and irrevocably reset to default values SmartClone This section enables the cloning of TV settings via USB RF Source SmartClone m Source RF USB This function selects the Source from which the Clone data will be received To receive data over RF requires an additional piece of equipment PSG installed in the property head end to transmit the data to the TVs Contact your Philips sales associate for more information SmartClone RF Channel Number This fun
8. and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used e een Lorp gt use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 This product may contain lead or mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance www elae org 16 Damage Requiring Service The appliance should be serviced by qualified service personnel
9. avoid screen damage Unplug the TV before cleaning Use a damp not wet cloth with only non aggressive cleaners to wipe the TV Use another damp not wet cloth to clean off the cleaning agent residue from the surface of the TV Recommended cleaning agents include Bleach solution 10 90 concentration of bleach to water Denatured alcohol comprising of 8076 9076 ethanol 1076 2076 methanol Risk of damage to the TV screen Never touch push rub or strike the screen with any object To avoid deformations and color fading wipe off water drops as soon as possible Environmental care Your product is designed and manufactured with high quality materials and components which can be recycled and reused he packaging of this product is intended to be recycled Contact your local authorities for information about how to recycle the packaging For product recycling information please visit www recycle philips com Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health E ike all LCD products this set contains a lamp with mercury please dispose of according to all local state and federal laws Philips pays a lot of attention to produce environment friendly products in green focal areas Your new TV contains materials which can be re
10. the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Philips Service Centers and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this manual any adjustments or assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction OSS declaration Open source software This television contains open source software Philips BU Hospitality hereby offers to deliver or make available upon request for a charge no more than the cost of physically performing source distribution a complete machine readable copy of the corresponding source code on a medium customarily used for software interchange To obtain the source code write to Philips Singapore Pte Ltd Philips BU Hospitality Software Development Manager 620A Lorong 1 Toa P
11. 1 connector of the TV Selecting No disables the communications SerialXpress A FAT RT Options m SerialXpress Yes No m hi feature enables disables the Serial Express communication via the RS232 connector of the TV gm Set the TV to a particular RC 1 Use the set up remote control to enter the PPV VOD and Multi RCoption menu But 2 Press Y A to select the one of the four colors LL TTL RDUM 3 Press OK button on setup remote control to store the setting m Enable standalone mode Decryption control Bie dre wien The premium HD content received by a satellite or cable is encrypted using a digital rights management system DRM called Pro Idiom to avoid piracy The technology is embedded in the TV and prevents guests from pirating the content MultiRC Off Blue Yellow Green Red m This function enables control of multiple T Vs in a room without any interference from each other s remote control m To enable Multi RC each remote control is set to one of the four colors blue green yellow or red Each TV in the room is separately programmed to a remote control of one of those colors m In this way each TV responds to only one RC that is Decryption Control set to the same color as the TV itself This prevents interference from each other s remote control when you Ww watch multiple TVs in a room m Decryption Control Model Serial Current Note
12. 22HFL5662H 26HFL5662H 32HFL4462F 32HFL5662D 32HFL5662H 32HFL5662L 37HFL4482F 37HFL5682D 37HFL5682L 42HFL4482F 42HFL5682D 42HFL5682H 42HFL5682L User Manual PHILIPS Contents 1 Notice Safety information and useful tips Important Safety Instructions OSS declaration Cleaning and care Environmental care Your TV Standalone installation and side controls Guest remote control optional Philips Hospitality setup remote control not included in box RC25 3GR setup remote control not included in box Installation Smart Installation Install TV Channels Home Screen Watch TV Smart Features USB TV Settings in Guest Menu Option Hotel Setting Hotel and Room Information Channel Map Setup Guest TV Settings PPV VOD Options Installer TV Settings SmartClone TV Upgrade Overview of TV connectors and controls Glossary A WwW CO ND UT 13 13 13 14 14 16 17 17 17 18 12 21 23 24 26 28 1 Notice Know these safety symbols CAUTION AUTIO MN RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation point c
13. Audio Language allows you to select from the audio languages of the digital TV channel if available m Closed Captions e CC Setup CC Off On CC on Mute Analog CC Mode GEN CCI CCS GEE IEXITV LEAT TESTS TEA Deta te Mode es 662 os Cot Cs CS6 For normal operation choose Analog CC Mode CC1 and Digital CC Mode CS1 m Picture format e Auto MovieExpand 16 2 Superzoom Widescreen gm Smart Window Off HDMI HDMI2 HDMI Side HDMI gm Smart Audio Select e Tuner AV Side AV CVI VGA m What s On e Indicate the current T V info 16 6 Hotel Setting MPEG Program Number corresponds to Digital Minor Channel Press 0 9 Number buttons to enter a channel Press M on the Setup Remote Control to display the Hotel number between 1 and 32 68 Setup Menu m Rings his option define which Ring is to be currently used by the TV for Hotel guest viewing The default is Ring 1 and only those channels marked as valid Ring1 channels are accessible on the TV Hotel and Room Information gm SmartGuide This option allows selection of different category option High Definition Sports News etc epen Wee m Label his option assigns a text channel label to the current TV channel The channel label will be displayed on the top of the screen during the changing of channels m Mute Mute allows you to customize the video and or audio muting of t
14. Initial Wizard Press Continue With Smart Install Skip Continue e n the option you can choose either Skip or Continue to continue the Smart Install In the first time set up choose Continue option and x press to enter the next step v 3 Smartinstall Connection to Paid Per View System LAU E n f MAJ 1 5marinstall Initial Wizard Connected To PPV System e n the option you can choose Yes or No to Connected lo PPV System e Choose either the No option and press VL to enter the next step Or for a PPV system installation choose Yes The Screen Menu will request for selection of Communication Type which includes SmatPort select No SPI 5V SPI 3V3 and Serial Express Select Your Communication Type SmartPort v Smartlnstall Standalone Proidiom selection P smartinstall Initial Wizard Using Standalone Proddiom n the option you can choose Yes or No to Using Standalone Pro ldiom e In the first time set up choose No option and press x 7 to enter the next step After above setting is completed you will enter the following setting OSD Install TV Channels This TV is equipped with Helptext which will time out in 10 sec or upon Remote Control key press m Install TV Channels his option allows you to Install TV channels For the Install TV Channels option Install TV Channels e Scan Iype Cable to receive TV signa
15. MP S INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL STATE OR FEDERAL LAWS ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUND CLAMPNEC SECTION 810 21 beZ GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H Note to the CATV system installer his reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical 2010 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Philips can t be held responsible neither for any errors in
16. alls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert ATTENTION Pour viter les choc lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond Healthcare TV models 22HFL5662H 26HFL5662H 32HFL5662H 42HFL5682H Class 1 Warning WARNING THIS TELEVISION IS CONSIDERED TO BE A DEVICE WITH CLASS 1 CONSTRUCTION AND IT SHALL BE CONNECTED TO A MAINS SOCKET OUTLET WITH A PROTECTIVE EARTHING CONNECTION Pendant control Instruction manual Marking CAUTION INSTALLER THIS PRODUCT IS NOT PROVIDED WITH A PENDANT CONTROL HOWEVER IT IS EXPECTED THAT THIS INSTITUTION OR HOSPITAL WILL PROVIDE ONE FOR ATTACHMENT TO THE APPROPRIATE RECEPTACLE ON THE PRODUCT AS PART OF THE INSTALLATION EXAMINE THE PENDANT CONTROL TO DETERMINE WHETHER A MARKING SIMILAR TO THE ONE BELOW APPEARS ON IT CAUTION RISK OF FIRE IF USED IN OXYGEN ENRICHED ATMOSPHERE RETURN TO HOOK OR HOLDER AFTER USE IF THE ABOVE NOTICE IS NOT PROVIDED ON THE PENDANT CONTROL REMOVE THE LABEL PROVIDED WITH THESE INSTRUCTIONS AND ATTACH
17. and press w to confirm the Smart Install Finished is OK e Select Your Smart Power Settings Off Low Medium High his feature enables the customization of the power consumption of the T V Set to High savings in power consumption is typically around 5076 as compared to when set to Off at maximum backlight setting e Default setting is Off Please Set Your ESP Settings e Set Your ESP Settings This feature enables the customization of the duration in hours in which TV will automatically turn off if there Is no user interaction via remote control or keyboard Setting this to O disables the function this is the default setting 12 4 Home Screen Press as key to go to the Home Screen Smart Features Media Player PHILIPS Watch TV In this option you can use the cursor to select category you would like to see via OK key This is the screen you see if SmartGuide is enabled otherwise you see gc TT Education Network a A if E ceu Lifestyle Other e High Definition Sports News Kids Movies Network Adult Hospital Lifestyle Other Education Smart Features Select this option you can start to set the Smart Feature For the Smart Features option you can do the setting for following options in sub menu Smar buide Enables list of Smart Features e Smart Guide Smart Window e SmartAudioSelect Spli
18. ate data if SmartUpdate is enabled 25 7 Overview of TV connectors and controls L D H model PHILIPS D 1 VIDEO IN 13 HDMI 1 HDMI 2 HDMI 3 2 AUDIO IN L R PENDANT CONTROL OUT 3 VGA IN 45 AUDIO OUT 80 4 PC AUDIO IN RS232 Service Port 5 USB 17 Future Use 6 SIDE HDMI Game Port Available on selected 7 AUDIO OUT L R ibd VIDEO IN De 9 AUDIO IN L R CVI YPbPr and AUDIO L R 11 Data 1 12 SPDIF OUT 26 F models 1 VIDEO IN 2 AUDIO IN L R 3 VGA IN 4 PC AUDIO IN 5 USB 6 SIDE HDMI 7 CVI YPbPr and AUDIO L R Data 1 9 SPDIF OUT HDMI 1 11 RS232 Service Port 2 TV 750 27 8 Glossary The ratio between the width and height of the TV picture on the screen An old analog TV has an Jesse Ran aspect ratio of 4 to 3 4 3 The new aspect ratio for HDTV is 16 9 which is closer to the aspect ratio P in a movie theatre Widescreen New TV systems support both 4 3 and 16 9 aspect ratio and can automatically switch between them A term often used when discussing a connections on a TV receiver or on video equipment which has PINION been especially designed to accept VCR or DVD audio video signals CVBS Composite Video Baseband Signal In broadcast television this refers to the video signal including the colour information and sync
19. ayoh Singapore 319762 This offer is valid for three years after the date of purchase of this product Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Philips Consumer Electronics may void the user s authority to operate the equi
20. ction selects the RF channel number where the TV can find the clone data Note that both the PSG must be set to broadcast on the same channel that the V must be set to receive SmarnClone m Source to TV This function will initiate the cloning process of data from the selected source to the T V TV to USB SmartClane m TV to USB This function will clone the data from the TV to a USB device 24 TV Upgrade This section enables the upgrading of the T V software via USB or RF It also allows the configuration of the SmartUpdate feature to enable the TV to be automatically upgraded Source TV Upgrade m Source RF USB This function Select the Source from which the TV Upgrade data will be received Like the SmartClone function the RF option requires a PSG installed in the property head end to broadcast the data to the TVs For more information contact your Philips sales representative Directio TV Upgrade m Direction USB To TV TV to USB TV Upgrade m RF Channel Number i Upgrade Type TV Upgrade Upgrade Type All Software Upgrade Package Software Asset Package This section Select the type of software to be upgraded to the T V e f set to ALL then all software types Software Upgrade Package and Software Asset Package will be upgraded automatically e f set to Software Upgrade Package there is an opt
21. cycled and reused At the end of tts life specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of Please ensure you dispose of your old T V according to local regulations Disposal of used batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations Copyright VESA FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association I DOLBY DIGITAL Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories ENERGY STAR Energy Star qualified products and practices help you save money and reduce Greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U S Environmental Protection Agency and U S Department of Energy e Press Power on the setup remote control 2 Your TV O P Standalone installation and side controls B D A eg GB ND G RESET UPGRADE E F automatically eD OO D QUO 1 Connect the RF signal from the wall socket to the TV This section describes how to install the T V channels 2 Plug the power cord into the power outlet 4 Press RC5 SETUP to display the setup menu e 2 pin powe
22. e TV will function If the ID is not the audio settings of the TV set Options are Smart found the TV will display an error message and not Sound Equalizer Balance AVL Default HDMI function This functionality requires an external device Andie Default DMI Audio Detuk HDMIE PSG to be installed in the property head end Contact you Philips sales associate if this functionality is required m Audio This feature allows the installer to customize Audio Loud Speaker Mute Bathroom Speaker Volume 21 eee nmn Control Control Digit Timeout 3 Digit Entry Step Tuning HDMI CEC This section allows the Installer to customizes the Control and Performance settings of the TV Digit Timeout This function enables the setting of the timeout in seconds between digit key presses during TV channel changing It is advisable not to specify too short a time period especially when you want to key in 2 or 3 digit channel numbers Recommended and default setting is 3 0 seconds 3 Digit Entry This function enables disables 3 digit entries during TV channel changing Step luning This function enables disables channel tuning at each digit key press Set to Yes each digit key press will perform a channel tuning instead of waiting for the entire 2 or 3 digits to be entered completely HDMI CEC This function enables disables the end user CEC functionality available on this TV Smart Powe
23. f 2 lines maximum 20 characters per line to be shown to the guest at V startup Home Menu Options LLLA Switch On Program This option allows you to set led Menu ltem f a channel or input source which you want the TV to always tune to at TV startup e Switch On Volume This option allows you to set the volume setting to be heard by the guest at TV startup e Channel Display his option allows you to set the On Screen Display to include numbers only labels only numbers and labels or none to be displayed m Home Menu Options are Smart Features Menu Item L HN Media Player Menu Item TV Settings Menu Item Menit M HE Logo Menu Item Guest Menu Options Volume Setting Guest TV Settings m Volume Setting Volume Indicator This option enables disables the display of the Volume Bar indicator when the Volume of the TV is adjusted Min Volume This option sets the minimum volume level of the TV which the guest can adjust to The minimum volume must always be less than or equal to the maximum volume Guest Menu Options are selecting Yes No for these items adds or removes their icons from the guest Home screen menu Language Menu Item Source Menu Item Sleep Timer Menu Item Closed Captions Menu e Max Volume his option sets the maximum volume tem Picture Format Menu Item V Chip Menu Item level of the TV which the guest can adjust to The maximum volume m
24. he TV display to the preferred picture format viewing mode Audio Features m Audio Enables Audio Language selection for digital channels or enables SAP Second Audio Programme selection for analog channels e Smart Audio Select enables the audio from different input sources connected to the TV to be selected while maintaining the current TV picture CC Setup CC On On CC on Mute This feature allows the Closed Captions settings of this TV to be customized Any changes made in this section will be reset to default values when the TV is turned off Analog CC Mode e Palos CC Mode CEL GE Ces CCF STEXT IS TEXT2 TEXT3 TEXIA Digital CC Mode s Digital GC Mode CST Cr Gos Got Co a CS6 15 US Movie Rating V Chip Setup e V Chip Setup US Movie Rating G PG PG13 R NC 17 XK NR US TV Rating Lock All Unlock All Done G General Programming PG Parental Guidance PG 13 Parental Strongly Cautioned if Under 13 R Restricted Accompanied By An Adult If under17 NC 17 No Children Under Age 17 X Adults Only NR Not Rated 5 Option OPTIONS Press CD key on the Guest Remote Control to enter the Option Menu Setting Audio Language m Audio Language Displays options if available SAP allows you to select the Secondary Audio Program of the analog TV channel if available or e
25. he current T V channel setup e Set to Audio the current TV channel will be audio muted e Set to Video the current TV channel will be video blanked You Can Now Start Automatic Installation Select this option can set the hotel Information to customer This Procedure Will Take A Few Minutes m Hotel Name Use the virtual keyboard to enter the Hotel Name m Hotel Phone Number Use the virtual keyboard to enter the Hotel Phone Number m Room Number Use the virtual keyboard to enter the ES Note Room Number m Auto install Start It is important to understand the difference between physical channel numbers and TV program numbers Channel Map Setup When Auto Install is selected the TV first scans for digital channels starting at a physical RF channel 2 and then increasing in frequency to 3 4 T he first digital Current Channel Setup program it finds will be installed on T V program 1 the second on TV program 2 etc Then the TV scans for analog channels For the sake of discussion let s assume that the TV found 36 digital programs Then the first analog channel found would be installed as T V program 37 the second as TV program 38 etc This could be a big change as most hybrid analog digital systems have the analog programs on the lower physical channels and the digitals on the higher But this is only the initial order that the Auto Install creates the final order of the channel map that you wish to p
26. ilt up static charges Section 810 of the National Electric Code ANSI NFPA No 0 1984 provides information with respect to proper grounding of the mats and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure below Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings Warning lo reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus 22 Battery Usage CAUTION Io prevent battery leakage that may result in bodily injury property damage or damage to the unit Install all batteries correctly with and alignment as marked on the unit Do not mix batteries old and new or carbon and alkaline etc Remove batteries when the unit is not used for a long time The batteries batteries installed shall not be exposed to excessive heat such as sunshine fire or the like 23 CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so mk i9 LA
27. ing Smart Secure e Using Smart Secure Yes No his function enables disables the Smart Secure feature which will check for a special security ID on a specific TV channel when enabled If the ID is found the TV will function If the ID is not found the TV will display an error message and not function This renders the T V non functional if the TV is removed from the property e Default setting is No smantinstall initial TV settings Using Smart Update Yes Ho e Using Smart Update Yes No his function enables disables the Smart Update feature of the TV If set to Yes then SmartUpdate will automatically check for new TV upgrades at regular intervals and upgrade the TV software accordingly You must select the channel for the SmartUpdate data default 87 and the time to check for updates default 4 00 am Default setting is Yes 10 4martiinstall Initial TV Settings Using Smart Guide e Using Smart Guide Yes No e f you choose yes than you have the further ability to enable disable the available individual categories High Definition Sports News Kids Movies Network Adult Hospital Lifestyle Other Education Categories are Hospital and Education for Healthcare T Vs H models or Adult and Other for Hospitality TVs D L F models e Default setting is No m Guest TV Settings his option allows you to set the Guest T V Settings For
28. ion to selectively upgrade individual software components such as main software standby software and back end software e f set to Software Asset Package there is an option to selectively upgrade individual software assets such as Hotel Logo Channel Logo Welcome Logo Customizable Ul Programmable Ul and SmartModule Clone Data SW Version Check TV Upgrade SW Version Check Yes No If set to Yes this feature causes the T V to perform a version check of the TV upgrade software to ensure that only a newer version will be installed TV Upgrade Start This function will initiate the T V upgrading process SmartUpdate TV Upgrade m SmartUpdate Yes No This function enables disables the SmartUpdate feature of the TV If set to Yes then SmartUpdate will automatically check for new TV upgrades daily at the time specified in the 5martUpdate Schedule step below and upgrade the TV software and or clone data if newer versions are found Like all previous RF download functions this too requires a PSG to be installed in the property head end SmartUpdate RF Channel TV Upgrade m SmartUpdate RF Channel This function selects the RF channel number where the TV will search for SmartUpdate data if SmartUpdate is enabled Time entry Cancel TV Upgrade SmartUpdate Schedule m SmartUpdate Schedule This function allows Entering the time of the day when the TV will search for SmartUpd
29. l Guest TV Settings Any Local Information And Or Advertising To Guest Yes No Any Local Information And Or Advertising To Guest Yes No ES Note This T V has the capability to add a custom Hotel Logo icon to the Home guest menu screen replaces the PHILIPS in the lower right corner Then this icon can be assigned to a channel where the property runs informational or advertising programming So when the guest clicks on this icon the T V will switch to the assigned program Similarly to the Welcome Logo the Hotel Logo must be in the png format and have the name HotelLogo png and it must be on the USB drive in a folder named BUH Logos The size of the picture must be Width 266 pixels and Height 136 pixels Again use of transparent background can create interesting images A smaller image can be used but it should be centered in a canvas of the size specified 5martinstall Guest IV Settings Any AV Source To Block Yes Ho e Any AV Source To Block Yes No Please Select Your Multi RC Settings e Select Your Multi RC Settings Off Blue Yellow Green Red e Multi RC enables control of multiple TVs in a room without any interference from each other s remote control To enable MultiRC each TV and its associated remote control is set to one of the four colors blue yellow green red Each TV in the room is separately programmed to a remote control of one of
30. ls from a cable Air to receive TV signals from an antenna Install TV Channels Auto Manual e Confirmation page to Start the TV channels tuning e System Searching Status Digital Channels Found Analog Channels Found Note you can do the setting for following options in sub menu It is important to understand the difference between physical channel numbers and TV program numbers When Auto Install is selected the TV first scans for digital channels starting at a physical RF channel 2 and then increasing in frequency to 3 4 The first digital program it finds will be installed on T V program 1 the second on TV program 2 etc Then the TV scans for analog channels For the sake of discussion let s assume that the T V found 36 digital programs Then the first analog channel found would be installed as T V program 3 the second as T V program 38 etc This could be a big change as most hybrid analog digital systems have the analog programs on the lower physical channels and the digitals on the higher But this is only the initial order that the Auto Install creates the final order of the channel map that you wish to present to the guest is fully programmable m Install TV Settings his option allows you to Install TV setting For the Install TV Settings option you ase Select Your Power On Settings Last Status e Select Your Power On Setting Last Status On Standby
31. om the TV Use this to connect the TV sound to a home theater audio system 28 29 PHILIPS O 2010 Koninklijke Philips Electronics N V All rights reserved
32. pment Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Canadian notice This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Avis Canadien Cet appareil num rique de la classe B respecte toutes les exigences du R glement sur le mat riel brouilleur du Canada Cleaning and care Do not touch the screen with anything hard as this may scratch mark or damage the screen permanently Do not rub with dust clothes containing chemical treatment Do not touch the surface with bare hands or a greasy cloth some cosmetics are harmful to the screen Unplug the TV before cleaning the screen When the surface becomes dusty wipe gently with absorbent cotton or other soft materials like chamois soaks Do not use acetone toluene and alcohol cleaners because they cause chemical damage Do not use liquid or aerosol cleaners Wipe off saliva or water droplets as soon as possible Long time contact with the screen causes deformations and color fading Screen care and sterilization Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to
33. r Energy Saving Features Energy Saving Features Smart Power Auto Sense ESP Standby Mode Smart Power This feature enables the customization of the power consumption of the TV Set to High savings in power consumption is typically around 50 as compared to when set to Off in maximum backlight setting Auto Sense This feature will enable disable the Light sensor of the TV If enabled the ambient light conditions of the room will be measured to automatically configure the optimum power consumption and picture performance of the T V according to the room ambience conditions ESP This feature enables the customization of the duration in hours after which TV will automatically turn off if there is no user interaction via remote control or keyboard Set to O disabled 22 Standby Mode This feature enables the customization of the T V standby behavior Set to Standard the TV will consume the least power during standby but startup time will be longer and hospitality communication is not possible Set to Fast the T V will be best performing in terms of turn on time and hospitality communication is also available but power consumption will be higher Background Design Theme Customizable UI Customizable UI feature Background Color Theme Background Design Theme This function enables the customization of the TV s Graphical User Interface via selection of colors and themes
34. r cord for D L models e 3 pin power cord for H models E Note The setup remote control is not included in the box Contact your Philips authorized agent or dealer to acquire PHILIPS the setup remote control Setup remote control might differ from the illustration less c 1999 920 edet 3 Turn the TV on Press POWER at the side of the TV PHILIPS HOSPITALITY Voce OsO OND Guest remote control optional O 9 9 amp C9 9 9 9 9 2 amp amp amp oe 6 POWER Press to turn on off the TV from or to standby mode HOME loggles the main menu on or off SOURCE Selects connected devices OPTIONS Selects different options COLOR buttons Selects tasks or options Forward button Fast forward feature USB MEDIA Access the USB files or photos OK Confirm an entry or selection Navigation buttons Navigates through the menus SMART FEATURES Direct access to Smart Features Mute Mute or restores audio output Program Switches to the next or previous channel 0 9 Numeric buttons Selects a channel or setting FORMAT launches the picture FORMAT menu BACK Going back to the previous menu Volume Increases or decreases volume SMART GUIDE Direct access to SMART GUIDE menu CLOCK Unused button Backward button Fast reverse feature STOP Stop button
35. resent to the guest is fully Current Channel Setup programmable m Channel Press 0 9 Number buttons to enter a program number For cable mode select a number between 01 250 For antenna mode select a number between 02 250 m Input selection of input source External input can also oe Cable Tuning be assigned to a program number m Channel Logo Press to enter a page containing as logos press AV to select a logo for the channel Press E button on the set up remote control to save the logo Digital Press Yes to select the digital channel RF Channel Number corresponds to Digital Major Channel Press 0 9 Number buttons to enter a channel number between 1 and 999 m Cable Tuning Yes INO 17 Hotel Logo Channel Map Setup Current Ring Switch On m Current Ring Ring1 Ring2 Rings Ring4 Only m Switch On Options are those channels assigned to the Current Ring will be e Hotel Logo This option allows the TV to display a available to the guest customized logo on the Home Menu of TV Welcome Picture This option enables a customizable picture to be shown at TV startup to welcome the guest before the TV switches to the channel or input source that is defined in Switch On Program Note Channels can be assigned to more than one ring Welcome Message This option enables a G uest TV Setti ngs customizable welcome text message o
36. rt Picture Security m Security Options This section allows the Installer to customize the Security settings of the TV There are Security Keyboard Lock Remote HH HH EUH Control Lock SmartSecure m Security This function sets the Security access level of the TV Setup Menu If set to High access to the Setup menu Is via the Installer Remote Control only If set to Standard access to the Setup Menu is via the Installer Remote Control or via a keycode sequence on the normal Guest Remote Control m Picture his feature allows the installer to customize the Picture setting of the T V set Options are Smart Picture Brightness Colour Contrast Sharpness Tint Active Control Backlight control Colour Temp m Keyboard Lock This function enables disables the Keyboard buttons on the TV If set to No all keys are TETEE enabled If set to Yes all keys are locked except for the TETEEETITIIT Power key If set to All then all keys are locked including Equalizer ET the Power key eraann m Remote Control Lock This function enables disables TTTUITTTTTTETIT the processing of the Guest remote control signals Installer remote control signals will still function regardless of the setting m Smart Secure This function enables disables the SmartSecure feature which will check for a special security ID on a specific T V channel when enabled If the ID is found th
37. s This is the yellow connector in an A V input Component Video Input is a type of connection that uses RCA type connectors to allow set top boxes Component Video Input or analog DVD players to connect a signal to the TV By offering the RCA type input YPbPr analog Y Pb Pr High Definition signals can be connected from a set top box directly into the TV allowing for the signal to display on the screen The generally agreed upon definition of HDTV is approximately twice the vertical and horizontal HDTV picture resolution of the old analog TV which essentially makes the picture twice as sharp HDTV also has a screen ratio of 16 9 as compared with the old TV screens which have a screen ratio of 4 3 HDTV offers reduced motion artifacts I e ghosting dot crawl Resolution measurement of the finest smallest detail that is visible in a video image TV Resolutions may be expressed as number of pixels in an image or more commonly As Total Number of horizontally scanned Lines used to create the image Standard Digital TV Resolutions Resolution SDTV 480i The picture is 720x480 pixels 480p The picture is the same 20x480 pixels but non interlaced HDTV 720p The picture is 1280x720 pixels non interlaced 10801 The picture is 1920x 1080 pixels interlaced 1080p The picture is 1920x 1080 pixels non interlaced SPDIF SPDIF Sony and Philips Digital Interconnect Format is the high quality digital audio output fr
38. t audio e Smart Picture Smart Sound 13 e Smart Window Off HDMI1 HDMI2 HDMIS Side HDMI his feature enables the display of Smart Window from other sources other than the main programme being view currently You can choose to display the HDMI display in the Smart Window and define the position of Smart Window e Smart Audio Tuner AV CVI Side AV VGA e SmartAudioSelect enables the audio from different input sources connected to the TV to be selected while maintaining the current TV picture smart Picture e Smart Picture Soft Natural Personal Rich Smart Sound e Smart Sound Personal Music Voice Theatre USB Using this option you can select the files you want to play For the USB option you can do the setting for following options in sub menu Folders music picture T V Settings in Guest Menu In this menu the following settings are available m Sets the Menu Language English Spanish French Sleeplimer m Sleeptimer OFF 15 30 45 60 90 120 180 240 The TV will turn off after the selected time interval m Source Select input as Tuner AV Side AV CVI HDMIT HDMI2 HDMI3 Side HDMI VGA Picture Format m Picture format Auto MovieExpand 16 9 Superzoom Widescreen his feature allows to set t
39. the Guest TV Settings option you can do the setting for following options in sub menu Please Select Your CC Settings e Select Your Closed Caption CC Settings Off On CC on Mute CC on Mute is the default and recommended setting Please Select Your Switch On Program Settings e Select your Switch On Program Settings TV AV CVI Side AV VGA HDMIT HDMD HDMIS Side HDMI Please Set Your Minimum Maximun And swith On Volume 100 90 e Set Your Minimum 0 Maximum 100 And Switch On 0 100 Volume Default switch on volume 12 5martinstall Guest IV Settings Any Welcome Message For Guest yes Ho e Any Welcome Message For Guest Yes No 5martinstall Guest TV Settings Any Welcome Picture For Guest Yes Ho e Any Welcome Picture For Guest Yes No amartinstall Guest TV Settings USB is Plugged in And Welcome Picture is There in USB OK Welcome Picture enables a customizable picture to be shown at TV startup to welcome the guest before the TV switches to the channel or input source that is defined in Switch On Program Note The welcome picture must be in the png format and have the name WelcomeLogo png and it must be on the USB drive in a folder named BUH Logos The size of the picture must be Width 940 pixels and Height 540 pixels Use of transparent background can create interesting images 11 amp marilnstal
40. those colors Set the TV to a particular RC Use the set up remote control and go to the PPV VOD options Press Y to go to the Multi RC option Press OK to select one of the four colors The TV is configured to respond to the RC that is set to the Please Select Your Standby Mode Settings same color Press the color button same color as above on the guest RC simultaneously to set to the selected color Press OK for five seconds while pointing to the TV The TV displays the RC color and the TV color on the screen If they do not match program the TV and the RC again e n this way each TV responds to only one RC that is set to the same color of the TV itself m Energy Saving Settings This option allows you to set the Energy Saving Features For the Energy e Select Your Standby Mode Settings Standard Fast Saving Settings option you can do the setting for This feature enables the customization of the TV following options in sub menu standby behavior e Set to Standard the T V will consume the least power Please Select Your Smart Power Settings during standby but startup time will be longer and ios E hospitality communication is not possible while the TV is in standby mode e Set to Fast the TV will be best performing in terms of turn on time and hospitality communication is also available while in Standby but power consumption will be higher When above 4 settings are done select Done
41. ust always be greater than or equal to the minimum volume 18 Selectable AV Selectable AV selecting Yes No for these items adds or removes them from the list of available sources when the guest presses the Source button on the remote control AV CVI Side AV VGA HDMI1 DM DIIS Side HOMI Auto Sensing Auto Sensing Side AV VGA Side HDMI USB This function allows you to enable disable the auto sensing feature of the side input sources based on video or audio Default setting is set to Yes CC Setup CC Setup Save CC CC Analog CC Mode Digital CC Mode Digital CC Setup Save CC allows you to set if the CC settings adjustment perform by guest shall be saved permanently or temporarily If Yes the CC settings adjustment done shall be saved permanently CC sets the default Closed Caption selection in the Guest Menu and the default CC mode at TV turn on 19 Saved V Chip V Chip Setup m V Chip Setup Saved V Chip Clear All Rating US Movie Rating US TV Rating m Save V Chip allows you to set if the V Chip settings adjustment perform by guest shall be saved permanently or temporarily If Yes the V Chip settings adjustment done shall be saved permanently PPV VOD Options SmartPort PPV VOD Options B SmartPort SPYS SPI 5V No m This function sets the voltage levels used for the SmartPort communication via the DATA
42. when he power supply cord or the plug has been damaged or Objects have fallen or liquid has been spilled into the appliance or The appliance has been exposed to rain or The appliance does not appear to operate normally or exhibits a marked change in performance or The appliance has been dropped or the enclosure damaged gt ooo EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE NEC GROUND ELECTRIC SERVICE EQUIPMENT A 17 Tilt Stability All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinet design Do not compromise these design standards by applying excessive pull force to the front or top of the cabinet which could ultimately overturn the product e Also do not endanger yourself or children by placing electronic equipment toys on the top of the cabinet Such items could unsuspectingly fall from the top of the set and cause product damage and or personal injury 18 Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer For use only with VESA Wall Mount Bracket 19 Power Lines An outdoor antenna should be located away from power lines 20 Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and bu
Download Pdf Manuals
Related Search