Philips CarStudio Car audio system CEM2250
Contents
1. Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user s authority to operate the equipment Recycling ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you see the crossed out wheel bin symbol attached to a product it means the product is covered by the European Directive 2002 96 EC ps4 Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment The making of unauthorized copies of copy protected material including computer programs files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equ2. 17 FINANCE Finance 18 CHILDREN Children s programs 19 SOCIAL Social Affairs 20 RELIGION Religion 21 PHONE IN Phone In 22 TRAVEL Travel 23 LEISURE Leisure 24 JAZZ azz Music 25 COUNTRY Country Music 26 NATION M ational Music 27 OLDIES Oldies Music 28 FOLK M Folk Music 29 DOCUMENT Documentary 30 TEST Alarm Test 31 ALARM Alarm Use alternate frequencies If the radio signal is poor turn on AF Alternate Frequency to search for another station with stronger signal 1 Press MENU 2 Press Aor repeatedly until AF is displayed 3 Rotate to select a setting e AF ON turn AF mode on AF OFF turn AF mode off Set region for AF tuning You can define AF tuning region REG ON Only stations in current region can be tuned to automatically REG OFF All stations can be tuned to automatically 1 Press MENU 2 Press Aor repeatedly until REG is displayed 3 Rotate to select a setting Receive traffic announcement If you do not want to miss traffic announcement when enjoying music turn on the TA Traffic Announcement function 1 Press MENU 2 Press Aor repeatedly until TA is displayed 3 Rotate to select a setting e TA ON when there is traffic announcement the unit switches to the tuner mode regardless of the current mode and begins to broadcast the traffic conditions When the traffic announcement i
3. e Before you disconnect the iPod iPhone switch the system to another source Control play Button Function g Press repeatedly to select a control mode control play on your iPod iPhone or on the system Pil Press to pause or resume play Press to play the previous or next track lt q gt i Press and hold to rewind a track or search forward fast DISP Press repeatedly to display available information about the current track REP Press repeatedly to select a repeat mode REP TRK repeat the current track or e REP ALL repeat all tracks SHUF Press repeatedly to select a play mode e SHU ALL play all tracks randomly SHU ALBM play tracks in the current album randomly or SHU OFF play all tracks in the iPod iPhone library in sequence Search for a track on iPod iPhone 8 Con nect 1 Press SOURCE repeatedly to select iPod external sound mode 2 Press to browse iPod iPhone menu sou rce 3 Rotate O to select the artist search mode and press to confirm 4 Press DISP to search alphabetically 1 Connect the external sound source to MP3 LINK socket with a 3 5 mm cable 5 Rotate to select artist then press to confirm 6 Rotate to select song in current album 7 Press to start play Note You cannot control the music via iPod iPhone under audio control mode 2 Press SOURCE repeatedly
4. disc slot with the label side facing up Ly Play starts automatically e If play does not start automatically press P H to start play 2 To eject the disc press 4 L gt When the disc is ejected the system switches to the previous source or radio mode Play from USB storage device Note e Ensure that the USB device contains playable music Insert the USB device 1 Slide the USB socket cover marked lt to the left 2 Insert the USB device into the USB socket L gt The unit starts playing from the USB device automatically Remove the USB device 1 Press to turn off the unit 2 Remove the USB device Control play Button Function A v Press repeatedly to select a folder Pil Pause or resume play 14 lt gt PI Press to play the previous or next track lt lt gt gt I Press and hold to rewind a track or search forward fast DISP Press repeatedly to display available information about the current track Button Function REP Press repeatedly to select a repeat mode e REP TRK repeat one track play current track repeatedly e REP FLD repeat a folder play all tracks in the current folder repeatedly REP ALL repeat all tracks play all tracks repeatedly SHUF Press repeatedly to select a play mode e SHUF FLD start random play for all tracks in the current folder e SHUF ALL start random p
5. he screen DEMO DEMO Demonstrate all ON features after the system stays inactive for 2 minutes DEMO Disable the demo OFF mode BLACK BKO 10 S Turn off the screen OUT automatically 10 seconds after last range 12L to 12R L left speaker R right speaker FADER fader range 12R to 12F R rear speaker F front speaker BASS bass range 7 to TREBLE treble range 7 to 7 3 Rotate to adjust the setting 18 EN operation BKO 20 S Turn off the screen automatically 20 seconds after last operation BKO OFF Never turn off the screen DANCE DANCE Enable the spectrum ON on the LCD display DANCE Disable the OFF spectrum on the LCD display 11 Additional ee information Reset You can reset the unit to its default setting 1 Detach the front panel 2 Press the RESET button with the tip of a ball point pen or toothpick L All settings are reset to factory default Note e Ifthe new fuse gets damaged again there may be an internal malfunction Consult your Philips dealer Replace fuse If there is no power check the fuse and replace if it is damaged 1 Check the electric connection 2 Remove the damaged fuse from the rear panel EN 19 12 Product information e Product information is subject to change without prior notice Power supply 1
6. 2V DC 11V 16V negative ground Fuse 15A Suitable speaker 4 80 impedance Maximum power 50 W x 4 channels output Continuous power 21 W x 4 RMS output 4 Q 10 T H D Pre Amp output 2 5V voltage Aux in level 500 mV Dimensions W xH x D 181 5 x 52 x 191 4 mm Weight 1 47 kg Radio Frequency range FM 87 5 108 0 MHz Frequency range 522 1620 KHz AM MW 9 kHz 530 1710 kHz 10 kHz Usable sensitivity FM 8 uV Usable sensitivity 30 uV AM MW Compatible USB devices e USB flash memory USB 1 1 host with interface reading all speed support 1 1 2 0 e USB flash players USB 1 1 host with interface reading all speed support 1 1 2 0 20 EN Supported formats e USB or memory file format FAT12 FAT16 FAT32 e For USB storage devices MP3 bit rate data rate 32 320 Kbps and variable bit rate WMAV4V7 V8 V9 L1 L2 P3 sampling frequencies 8 48 kHz e For Disc MP3 Bit rates 8 320 kbps variable bit rates e WMA sampling frequencies 32 kHz 441 kHz 48 kHz e WMA Bit rates 32 192 kbps variable bit rates e Directory nesting up to a maximum of 8 levels umber of albums folders CD maximum 99 USB or memory maximum 99 umber of tracks titles CD maximum 999 depending on number of album USB or memory maximum 999 ID3 tag v2 0 or later Unsupported formats Empty albums an empty album is an album that does not c
7. Always there to help you Register your product and get support at www philips com welcome a CEM2250 Question Contact Philips PALS User manual 1 Manuale utente 75 Benutzerhandbuch 23 Gebruiksaanwijzing 101 Mode d emploi 49 PHILIPS Contents 1 Important 2 Safety 2 Notice 2 2 Your car audio system 4 Introduction 4 What s in the box Overview of the main unit 3 Install the car audio y Connect wires 7 Mount into the dashboard 8 Attach the front panel 9 4 Get started 10 For the first time use 10 Set the time format 10 Set the clock 10 Select a source 10 Switch music listening zone 10 Mute the button beep 11 5 Listen to radio 14 Select a tuner region 11 Select tuner sensitivity 11 Select radio band 12 Search for a radio station 12 Store radio stations in memory 12 Play with RDS 12 6 Play from hard media 14 Play from a Disc 14 Play from USB storage device 15 Control play 15 Switch tracks 15 7 Play from iPod iPhone Compatible iPod iPhone Connect your iPod iPhone 16 Control play 16 Charge your iPod iPhone 17 8 Connect external sound source 17 9 Adjust sound 18 10 Adjust system settings 18 11 Additional information 19 Reset 19 Replace fuse 19 12 Product information 20 13 Troubleshooting 2i 14 Glossary 22 EN 1 Important Safety e Read and understand all instructions before you use your apparatus If damage is caused by failure to follow
8. SB When a USB storage device or compatible iPod iPhone is connected and recognized you can select this source to play audio files that are stored on it Switch music listening zone Philips innovative Zone technology enables driver or passengers to enjoy music with the best speakers balance and experience more vivid spacial effect as the artist is intended to create You can switch the music listening zone from driver to passengers for the best speaker sound settings in car 1 Press and hold ZONE L gt The current setting is displayed 2 Rotate A W to select a setting ALL All LEFT Left RIGHT Right FRONT Front Mute the button beep The beep sound of the buttons is enabled by default You can turn this beep sound on or off 1 Press MENU 2 Press Aor repeatedly until BEEP TONE is displayed 3 Rotate to select a setting BEEP ON turn the beep sound on BEEP OFF turn the beep sound off 5 Listen to radio Select a tuner region You can select suitable country region of the radio 1 Press SOURCE to select radio mode 2 Press MENU repeatedly until AREA is displayed 3 Rotate to select USA United States LATIN Latin America EUROPE Western Europe RUSSIA Russia MID EAST Middle East ASIA Asia Pacific JAPAN Japan AUSTRALIA Australia 4 Press to confirm Select tuner sensitivity To receive more rad
9. ach the front panel Note e Before you detach the front panel make sure that the system is turned off 1 Press 4 to release the front panel 2 Pull the front panel outwards to remove it 7 Reconnect the negative terminal of the car battery EN 9 4 Get started For the first time use Note e Select correct country region for this unit otherwise the unit can not work properly 1 Press to turn the unit on tL SELECT OPERATING REGION is displayed 2 Rotate to select an option USA United States e LATIN Latin America EUROPE Western Europe RUSSIA Russia e MID EAST Middle East ASIA Pacific e JAPAN Japan e AUSTRALIA Australia 3 Press to confirm Set the time format 1 Press MENU 2 Press Aor repeatedly until CLOCK FORMAT is displayed 3 Rotate to select a setting e CLK 12H CLK 24H 10 EN Set the clock 1 Press MENU repeatedly until CLOCK SET is displayed Rotate to set hour Press to confirm Rotate to set minute mn bh WwW NY Press to confirm Display the clock In any mode press and hold msi until the clock is displayed e Press any key to cancel the clock display Select a source Press SOURCE repeatedly to select a source e RADIO Listen to FM AM radio e MP3 LINK Listen to the audio input through the MP3 LINK socket e iPod U
10. e in car audio system you can enjoy your drive while listening to e FM or AM MW radio e Audio from CD or MP3 disc e Audio from USB devices e Audio from iPod iPhone e Audio from other external devices The unit supports the following media format COMPACT MSE DIGITAL AUDIO Ay Plays kA What s in the box Check and identify the contents of your package Main unit with a sleeve Q Front panel Q Trim plate Carrying case for front panel G Rubber cushion Screw x 1 pc Disassembly tools x 2 pcs User manual Overview of the main unit QO 0 00 PHILIPS CarStudio AUDIO system CEM2250 mo AS sA BREP SHUF4 o o 5 o DEB GENAsouND TECER e D j AN F i Oo 4 SOURCE e Select audio source MENU e Access system menu G e Return to previous menu e Navigate the iPod iPhone menu O e Press and hold to turn the unit on o
11. g cloth from he centre to the edge in a straight line e This disc may be defective Play another disc e Ensure that the CD is a finalised CD CD R CD RW e Ensure that the CD is not encoded with copyright protection technologies The CD skips tracks e Ensure that the CD is not damaged or dirty Ensure that random mode is deactivated Disc cannot be ejected Press and hold A Preset stations lost e Battery cable is not correctly connected Connect the battery cable to the terminal hat is always live Display show ERR 12 e USB data error Check the USB device EN 21 14 Glossary M MP3 A file format with a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group 1 or MPEG 1 Audio Layer 3 With the MP3 format one CD R or CD RW can contain about 10 times more data than a regular CD R RDS Radio Data System RDS tuners can automatically tune in stations according to the types of music or talk they broadcast RDS also enables a receiver to display text messages and even graphics usually call letters and format information that many FM stations include on a sub carrier signal within their normal broadcast signal Some RDS equipped tuners can even override with traffic alerts or emergency broadcasts during playback of other media CD MD or cassette There are other useful features too many of which are offered by the growing number
12. installation e Improper fuses can cause damage or fire When you need to change the fuse consult a professional Note on the power supply lead yellow When you connect other devices to this apparatus ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices Notes on speaker connection e Never connect speaker wires to the metal body or chassis of the can e Never connect speaker wires with stripes to one another Connect wires Caution e Ensure that all loose leads are insulated with electrical tape zo i Note Consult a professional to connect CEM2250 as instructed below 1 Check the car s wiring carefully and connect them to the the supplied male connector Note Risk of danger Please consult a professional to perform the below steps ISO male connectors Connect to 1 Green strip black edged Left speaker green strip Rear 2 White strip black edged Left speaker white strip Front 3 Gray strip black edged Right speaker gray strip Front 4 Purple strip black edged Right speaker purple strip Rear e Red gnition key 12V DC when ON ACC f Blue Motor electric antenna relay control lead g White edged blue strip Amplifier relay control lead h Black Ground i Yellow To the 12V car battery which is energized at all times EN 7 2 Connect the antenna and amp
13. instructions the warranty does not apply e This apparatus is designed for negative ground earth 12V DC operation only e To ensure safe driving adjust the volume to a safe and comfortable level e Improper fuses can cause damage or fire When you need to change the fuse consult a professional Use only the supplied mounting hardware for a safe and secure installation e To avoid short circuit do not expose the apparatus remote control or remote control batteries to rain or water e Never insert objects into the ventilation slots or other openings on the apparatus e Clean the apparatus and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the apparatus ever place any objects other than discs into the apparatus ever use solvents such as benzene thinner cleaners available commercially or anti static sprays intended for discs e Visible and invisible laser radiation when open Avoid exposure to beam e Risk of damage to the apparatus screen ever touch push rub or strike the screen with any object Caution e Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation e The apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles
14. io mode press to tune for radio station e Press to skip search for track e Press to fast backward forward playback 5 DISP Press to display current status e In iPod iPhone mode press and hold o access music search mode EQ AUDIO e Press repeatedly to select equalizer EQ setting e Press and hold to access audio setting menu a Unlock the panel BAND Select tuner band RESET e Restore default settings Disc slot 3 Install the car audio These instructions are for a typical installation However if your car has different requirements make the corresponding adjustment If you have any questions regarding installation kits consult your Philips car audio dealer Ey Caution e This unit is designed for negative ground earth 12V DC operation only e Always install this unit in the car dashboard Other locations can be dangerous as the rear of the unit heats up during use e To avoid short circuit before you connect ensure that the ignition is off e Ensure that you connect the yellow and red power supply leads after all other leads are connected e Ensure that all loose leads are insulated with electrical tape e Ensure that the leads do not get caught under screws orin parts that will move e g seat rail e Ensure that all ground earth leads are run to a common ground earth point e Use only the supplied mounting hardware for a safe and secure
15. io stations or only stations with strong signal you can adjust the tuner sensitivity 1 Press MENU repeatedly until LOCAL is displayed 2 Rotate to select a setting LOCAL ON local on only stations with strong signal can be broadcast LOCAL OFF local off stations with strong and weak signals can be broadcast EN 11 Select radio band 1 Press SOURCE repeatedly to select radio mode 2 Press BAND or amp repeatedly to select band FM1 FM2 FM3 AM1 or AM1 Search for a radio station Search for a radio station automatically Press I or PPI to search for the previous or next radio station with strong signals L gt SEEK or SEEK is displayed until the previous or next strong station is detected Search for a radio station manually 1 Press and hold M or PPI until the frequency digit flashes 2 Press Kd or DPI repeatedly until the target frequency is displayed Store radio stations in memory You can store up to 6 stations in each band Store stations automatically 1 In radio mode press and hold DBB AS until STORE is displayed 2 Press to confirm L gt The six strongest stations of the selected band are saved in preset channel automatically e To select a stored radio station press the numeric button directly 12 EN Store stations manually 1 Pres A V repeatedly to select a tuner band 2 Tune to a radio station that yo
16. ipment should not be used for such purposes Ay Plays A Windows m Media Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries Made for bliPod JiPhone Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance iPod and iPhone are trademarks of Apple Inc registered in the U S and other countries This apparatus includes this label CLASS 1 LASER PRODUCT 2013 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly EN 2 Your car audio system Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Introduction With th
17. lay for all tracks e SHUF OFF cancel shuffle play Switch tracks During play you can switch tracks or folders quickly Switch tracks directly 1 Press JI to access the track list L gt The file name of current track scrolls 2 Rotate to toggle through tracks 3 Press O amp to play the selected track Switch folders for a track 1 Press wi to access the folder list L gt The name of current folder scrolls 2 Rotate to toggle through folders 3 Press amp to select the folder L gt The system starts playing the first track under the folder EN 15 7 Play from iPod iPhone You can enjoy audio from iPod iPhone through this unit Compatible iPod iPhone Apple iPod and iPhone models with a 30 pin dock connector Made for e iPod nano 2nd generation e iPod nano 3rd generation 4GB only e iPod nano 3rd generation 8GB only e iPod nano 4th 5th and 6th generation e iPod classic 1st and 2nd generation e iPod touch 1st 2nd 3rd and 4th generation e iPod video 30GB 80GB only Works with e iPhone e iPhone 3G iPhone 3GS e iPhone 4 iPhone 4S Connect your iPod iPhone Connect an Apple 30 pin USB cable to 16 EN the USB socket on the front panel of this system and your iPod iPhone L gt iPod USB is displayed L gt The system starts playing tracks that are stored on your iPod iPhone Note
18. lifier as 1 Ensure that car dashboard opening is illustrated if applicable within these measurements op E eal Ln 2 Remove the mounting sleeve with the supplied disassembly tools Connector Connect to 1 ANTENNA Antenna 2 Socket for ISO male As indicated in connectors Step 1 above 3 REARLINE OUT R Rear right speaker Socket REAR NE W iE Rear left speaker Socket 5 OE REMOTE OE Remote Purple 3 Install the sleeve into the dashboard and Tip bend the tabs outward to fix the sleeve e The pin arrangement for the ISO connectors depends on the type of vehicle you drive Be sure to make proper connections to prevent damage to the unit Mount into the dashboard e If the car does not have an on board drive or navigation computer disconnect the negative terminal of the car battery e Ifthe car battery is not disconnected to avoid short circuit make sure that the bare wires do not touch each other 4 Place the supplied rubber cushion over the end of the mounting bolt Attach the front panel 1 Insert the notch on the front panel to the chassis on the main unit 2 Press the left end of the front panel inwards until it is securely locked with a click sovooooooooooooNNANN ogooooooooooogononn 5 Slide the unit into the dashboard until you hear a click sound Det
19. of RDS stations W WMA Windows Media Audio An audio format owned by Microsoft is a part of Microsoft Windows Media technology Includes Microsoft Digital Rights Management tools Windows Media Video encoding technology and Windows Media Audio encoding technology 22 EN PHILIPS Specifications are subject to change without notice 2013 Koninklijke Philips Electronics N V All rights reserved CEM2250_12_UM_V1 3
20. ontain MP3 WMA files and is not be shown in the display e Unsupported file formats are skipped For example Word documents doc or MP3 files with extension dlf are ignored and not played e AAC WAV PCM audio files DRM protected WMA files way m4a m4p mp4 aac WMA files in Lossless format 13 Troubleshooting Caution e Never remove the casing of this apparatus To keep the warranty valid never try to repair the system yourself If you encounter problems when using this apparatus check the following points before requesting service If the problem remains unsolved go to the Philips web site www philips com support When you contact Philips ensure that your apparatus is nearby and the model number and serial number are available No power or no sound Car engine is not on Turn the car engine on Cable is not correctly connected Check connections e Fuse is burnt Replace fuse e Volume is too low Adjust volume e If the above solutions cannot help press RESET button e Ensure that the track played is of a compatible format Noise in broadcasts e Signals are too weak Select other stations with stronger signals e Check the connection of the car antenna Change broadcast from Stereo to mono Cannot play disc e Ensure that the disc label is inserted with he printed side facing up e Wipe the disc with fibre cleanin
21. r off e Press to confirm selection OZONE A Y Press to mute or unmute sound Rotate to adjust volume Rotate to switch between menu options n radio mode press to select tuner band For mp3 and wma tracks on a storage device press to select MP3 VWWMA folder Press and hold to switch music listening zone For iPod iPhone press repeatedly to select a control mode EN 5 4 e Eject disc e USB socket MP3 LINK Connect external audio device mw e Press to turn on or off Maximizing volume e In any mode press and hold to view clock DBB AS Press to turn on or off Dynamic Bass Boost DBB sound e In radio mode press and hold to access to tuner auto store 1 gt n radio mode press to select preset radio station No 6 e In radio mode press and hold to store he current radio station at station No 6 Press to start pause or resume play 2 REP SHUF e In radio mode press to select preset radio station No 3 4 e In radio mode press and hold to store he current radio station at station No 3 4 For wma and mp3 tracks press to access to repeat play or shuffle play 3 2 va e In radio mode press to select preset radio station No 1 2 e In radio mode press and hold to store he current radio station at station No 1 2 For wma and mp3 tracks on a storage device press to access track folder list ea gt gt e In rad
22. s over it returns to the previous mode e TA OFF traffic announcement does not cut in EN 13 Note e Ifthe current received TA signal remains weak for over 120 seconds the unit will activate TA Seek mode automatically The TA Seek will seek for other station with good condition of TA signal Tip e When a traffic announcement cuts in user can short press to terminate the traffic announcement and the unit will resume to previous playback mode Synchronize the system clock You can synchronize the system clock with an RDS station that transmits time signals 1 Press MENU 2 Press Aor repeatedly until CT is displayed 3 Rotate to select a setting e CT ON turn on the RDS clock Time shown on the unit synchronizes with that on the RDS station e CT OFF turn off the RDS clock Tip e The accuracy of the transmitted time depends on the RDS station that transmits the time signal 14 EN 6 Play from hard media You can use this system to listen to audios that are stored on a compatible disc or USB storage device Play from a Disc Note e You cannot play CDs encoded with copyright protection technologies You can play commercially available audio CDs and these discs e CD Recordables CD R CD Re writables CD RW e MP3 CDs WMA CDs Note e Ensure that the disc contains playable content 1 Insert the disc into the
23. u want to store 3 Press a numeric button for 3 seconds L gt The station is saved in the selected channel e To select a stored radio station press the numeric button directly Play with RDS The RDS Radio Data System function operates only in areas with FM stations broadcasting RDS signals If you tune to an RDS station the station name are displayed Enable the RDS function Note e The default setting for RDS is on 1 Press MENU Press amp or W repeatedly until RDS is displayed 3 Rotate to select RDS ON L gt The RDS function is turned on Select program type Before tuning to RDS stations you can select program type and let the unit search only for programs of the selected category 1 Press MENU 2 Press Aor repeatedly until PTY is displayed 3 Press to confirm 4 Rotate O to select a type then press to confirm Item Program Description type 1 NEWS News services 2 AFFAIRS Politics and current affairs 3 INFO Special information programs a SPORT Sports 5 EDUCATE Education and advanced training 6 DRAMA Radio plays and literature 7 CULTURE Culture religion and society 8 SCIENCE Science 9 VARIED Entertainment programs 10 POP M Pop music 11 ROCK M Rock music 12 EASY M Light music 13 LIGHT M Light classical music 14 CLASSICS Classical music 15 OTHER M Special music programs 16 WEATHER Weather
24. until MP3 LINK is displayed 3 Operate the external component refer to Charge your iPod iPhone the instructions supplied with the external component Once the iPod iPhone is docked and recognized the charging starts EN 17 9 Adjust sound The following operations are applicable to all supported media Button Function Rotate to increase or decrease the volume level Press to mute or restore sound W O Press to enable or disable the maximum volume Press to enable or disable the Dynamic Bass Boost DBB effect DBB AS 10 Adjust system settings 1 Press MENU to access system settings Press amp or W repeatedly until one of the following settings scrolls BEEP DIMMER DEMO BLACK OUT or DANCE 3 Rotate to change the setting EQ Press repeatedly to select a sound AUDIO equalizer e OPTIMAL optimal e FLAT flat POP pop USER user TECHNO techno e ROCK rock CLASSIC classic AZZ jazz EQ 1 Press and hold to activate the AUDIO setup of customized sound equalizer 2 Press A or Y repeatedly to select the item to be adjusted e BALANCE balance BEEP BEEP Enable the beep ON sound of buttons BEEP Disable the beep OFF sound of buttons DIMMER DIMMER Increase the HIGH brightness level of he screen DIMMER Decrease the LOW brightness level of
Download Pdf Manuals
Related Search