Home

iHome iW2

image

Contents

1. Connected Not Connected Select the iHome iW2 as your AirPlay O Press m4 Pl gt gt buttons on the iW2 or T Note for AirPlay streaming audio speaker use your iTunes iPad iPhone or iPod touch controls directly iPad iPhone and iPod touch support point to point audio streaming to one Press 4 buttons to adjust volume AirPlay enabled speaker or control volume on your AirPlay source device iTunes supports point to multipoint audio streaming to up to three AirPlay enabled speakers performance depends on your Wi Fi network and environment English 5 Getting Started Master Power The iW2 has a master power mode control interface to power the unit ON or OFF help conserve energy and reboot the iW2 speaker In order for the iW2 speaker to power ON the unit must be connected to an AC outlet Master Power ON Press amp hold Power Button 3 seconds to boot up and activate your iW2 speaker Master Power OFF Press amp hold O Power Button 3 seconds a second time to power the iW2 speaker OFF conserve energy and reset the unit Note If the iW2 is in the Master Power OFF state the iW2 will not support iPad iPod iPhone charging remote control commands AirPlay network setup nor firmware updates Powering your iW2 speaker ON To power the iW2 speaker ON 1 Plug AC adaptor cable into the iW2 speaker and plug adaptor into a live AC wall outlet 2 Press amp
2. e N NM Op e a a works with gt A iHome Connect Wi Fi Network Setup app A iHome Sleep m FREE alarm clock app A iHome Radio Internet radio app available on the App Store iW2 User Manual AirPlay wireless speaker system AirPlay English www ihomeaudio com Welcome to the iHome iW2 Thank you for choosing iHome The Air Series represents the new frontier of product offerings from iHome that embrace Wi Fi connectivity and AirPlay Apple s new wireless streaming technology The iHome iW2 with AirPlay offers the latest experience in home audio entertainment allowing users to stream digital audio over Wi Fi from iTunes iPad iPhone and iPod touch Featuring SRS TruBass DSP technology the iW2 offers high fidelity audio with a versatile space saving design You can use the iW2 to Stream music directly from iTunes on your Mac or PC using your home Wi Fi network Stream your favorite music from your iPad iPhone or iPod touch from your iPod library or popular music apps like PANDORA and iHeartRadio available on the App Store Play and charge your iPad iPhone iPod with included USB sync cable Add Multiple iHome AirPlay speakers to enjoy multi room audio anywhere in the home note streaming to multiple speakers simultaneously requires iTunes as the source e Download and enjoy iHome apps available on the App Store iHome Sleep a free music alarm clock app iHome Radio
3. To connect your iW2 speaker to a Wi Fi network using a Mac or PC follow these steps ED 1 Connect AC power and power ON iW2 speaker 2 Press and hold 5 sec amp Network Setup button on the back of press amp hold power button 3 seconds urit to power ON iW2 Note The Network Status LED will begin flashing green and the top 2 T control panel will also flash 3 On your Mac or PC select the network called iHome Setup from Wi Fi network settings Note This process can take up to 2 minutes Be patient and refresh your network list if necessary Currently connected to YOUR Wi Fi NETWORK J Internet access AirPort On Turn AirPort Off iHome Setup 4 Launch a web browser ex Safari Chrome or Firefox and enter W camel l m http 192 168 1 12 in the address bar YORIN F network Another network Another network P Information sent over this network might be visible to others Open Network and Sharing Center Note If the page is not initially available or becomes unresponsive j er s Join Other Network reload the page See troubleshooting if problem persists GE Nike Open Network Preferences 9 42 W el 1 15 2011 5 Rename the iW2 speaker and click Save optional upper right corner of Rig lower right corner of 6 Select pr
4. 3 Select your preferred Wi Fi network from the list of available a networks and enter password if prompted CO J Note Connecting to a network may take up to 60 seconds If network connection is unsuccessful reset the unit or disconnect your iOS device and reconnect and repeat the above steps 4 Rename your iW2 speaker and press Save optional l 10 09 PM a Z 10 09 PM Success Wi Fi Networks K K R Choose a Network for iW2 1 Verify that the Network Status LED is green to confirm that the iW2 6 iHome Y Wi Fi Net k gt is successfully connected to a network v Dao 2 Keep reading to learn how to use the iW2 and control your iTunes E Wi Fi Not Connected gt _ gt Omara ne a and iOS audio content E Name iHome iW2 2E33 gt Other Wi Fi Network Other Wi Fi Network T Model iHome iW2 Firmware 31 1 0 How lovueo Aliblay gt Other Wi Fi Network 5 0 network setup i network and eo Dane eee CD w C 30 O 4 ve 68 OCH a g ii OCH Sj Cancel Name Save Connected Not Connected H iHome Note To begin using AirPlay wireless streaming your AirPlay source Q wm Yourwrinewor gt vecom spor o devices must be connected to the same Wi Fi network to which your Cl eee iW2 speaker is connected Model iHome iW2 Firmware 31 1 0 O WEJRITI YJUJIJOP Een OO SERIJO aA s b r o H u k LI English Wi Fi Network Setup continued Option B Connecting with your Mac or PC over Wi Fi e
5. Mac or PC to the same Wi Fi network as iW2 2 Open W iTunes on your computer 3 Within iTunes open Preferences Select the Devices tab and M activate the following option Allow iTunes control from remote speakers 4 Click OK close iTunes preferences Look for the La AirPlay icon in the bottom right corner of the iTunes window 6 Click the La AirPlay icon and choose iW2 from the list of speakers Click Multiple Speakers to select additional AirPlay speakers If the iW2 speaker is not available restart iTunes and verify that the iW2 is powered on and connected to the same network 7 Press play UI AirPlay Wireless Audio Mode Enjoy AirPlay audio anywhere 1 Press h to exit standby mode and power the iW2 ON 2 Press 8 for wireless audio mode to listen to AirPlay music 3 Use m4 bi gt buttons on the iW2 or iW2 remote to control streaming AirPlay content Local iPod Audio Mode Charge and Play using iPod USB sync cable 1 Connect USB sync cable to iW2 s USB port 2 Press H Local Playback mode button and enjoy iPod iPhone iPad charging and audio playback 3 Using Pil gt buttons on the iW2 or iW2 remote in iPod mode will control your iPod music Note Use Local iPod Audio mode for both iPod and Aux in audio playback English Control SRS TruBass The iW2 features SRS TruBass digital sound processing to enhance the audio performance and ensure proper bass response when list
6. an internet radio music app iHome Connect a network setup app for iHome AirPlay enabled products Keep reading to discover everything you need to know to get the most from your iHome iW2 English 2 IW2 Overview Contents 1 iW2 speaker 2 Power adaptor 3 USB sync cable 4 Remote control 5 Document pack iW2 Speaker poner adaptor USB sync remote Start Guide cable Document Pack Compatibility Made for iPod iPhone iPad USB connector works with iPod touch 1st 2nd 3rd and 4th generation iPod nano 2nd 3rd 4th 5th and 6th generation iPhone 4 iPhone 3GS iPhone 3G iPad and iPad2 e AirPlay AirPlay works with iTunes iPod touch 2nd 3rd and 4th generation iPhone 4 iPhone 3GS iPad 2 and iPad For AirPlay the iW2 must be connected to Wi Fi with networked access to a Mac or PC running iTunes 10 1 or later or an iPad iPhone or iPod touch running iOS 4 2 or later mM oe e yaa iHome Apps iHome Sleep and iHome Radio and iHome Connect apps only work with iPad iPhone iPod touch and requires iOS 4 0 or later Maintenance Place the unit on a level surface away from sources of direct sunlight or excessive hear Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture Clean
7. device or iTunes music controls Local iPod Audio mode play audio via USB sync cable or aux in volume Standby mode Standby Mode master power is ON b CD power Press the O Power button to place the iW2 speaker in standby mode and stop audio playback Power ON modes iPod Mode iPad iPhone iPod detected via USB connector ly 5 4 v I4 gt il gt gt i C power iPod Mode iPad iPhone iPod not detected via USB connector ly EJ 4 4 CC CO power AirPlay Wireless Mode connected to a network ly BR 4 v 1 lt gt il gt gt i Cd Cd power AirPlay Wireless Mode not connected toa network b BR v o Z MN C power Note The AirPlay Wireless button will continuously flash on off to indicate that the iW2 is not linked to a network when ON and in AirPlay Wireless mode Volume Press 4 4 buttons to adjust volume V 4 Cd CO English 7 Network Setup for AirPlay Check list Please verify the following steps before attempting to connect your iW2 speaker to a Wi Fi network M To enjoy AirPlay wireless audio you must have the following iTunes 10 1 or later on a Mac or PC iPad iPhone or iPod touch with iOS 4 2 or later Afunctioning home network with Wi Fi Download the latest software updates for iTunes and your iOS device to e
8. hold the Power button 3 seconds to power the unit ON Note Allow 20 seconds for the speaker to startup before interacting with the iW2 speaker 3 Press the b Power button to switch between power ON and Standby mode The iW2 speaker will power ON to AirPlay mode 0 outlet Resetting your iW2 speaker Just like your computer it is sometimes necessary to reset the iW2 speaker to make sure the unit is working properly To reset and reboot the iW2 speaker 1 Unplug AC adaptor and wait for 10 seconds then reconnect AC adaptor to the iW2 speaker 2 Press amp hold the lt Power button 3 seconds to power the unit ON Note Allow 20 seconds for the speaker to startup before interacting with the iW2 speaker The iW2 will store your network settings and automatically reconnect to your network if it is detected after being reset or unplugged from AC power English 6 Using your iW2 Top panel controls The iW2 speaker has a backlit control interface for power mode volume and music controls Controls will be lit according to the status of the iW2 speaker and the selected mode Note Music transport controls will flash once to signal a proper press TOP PANEL 0 Se B 4 0 I lt gt il ppl power power AirPlay Wireless mode iPod and iTunes audio via iOS
9. l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement The device meets the exemption from the routine evaluation limits in section 2 5 of RSS 102 and compliance with RSS 102 RF exposure users can obtain Canadian information on RF exposure and compliance Le dispositif rencontre l exemption des limites courantes d valuation dans la section 2 5 de RSS 102 et la conformit l exposition de RSS 102 rf utilisateurs peut obtenir l information canadienne sur l exposition et la conformit de rf This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules These limits provide reasonable protection against radio and TV interference in a residential area However your equipment might cause TV or radio interference even when it is operating properly To eliminate interference you can try one or more of the following corrective measures e Reorient or relocate the receiving antenna e Increase the distance between the equipment and the radio or TV e Use outlets on different electrical circuits for the equipment and the radio or TV e Consult your dealer or an experienced radio television technician if the problem still exists Modifying or tampering with your system s internal components can cause a malfunction and might invalidate the system
10. s warranty and void your FCC authorization to operate it The separation distance between the equipment and the user shall not be less than 20 cm This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada Warranty Limited 1 Year Warranty Information iHome a division of SDI Technologies Inc hereafter referred to as SDI Technologies warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of 1 Year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI Technologies will repair or at its discretion replace this product without charge except for a 30 00 charge for handling packing return UPS postage and insurance This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below The product must include proof of purchase including date of purchase The fee for service without proof of purchase is 75 00 Before returning this product for service Before returning this product for service please check our support section at www ihomeaudio
11. your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as benzene thinner or similar materials can damage the surface of the unit English 3 iW2 Controls TOP PANEL 0 D B v 0 DA gt ii pr power power Ld AirPlay Wireless mode iPod and iTunes audio via iOS device or iTunes music controls Local iPod Audio mode audio via USB sync cable or aux in volume REAR PANEL FRONT PANEL status LED e Green when touching a button on remote i s 3 e Green blinking when volume is muted REAR PANEL aux in ppm a firmware button amp status LED aux in NTI status network setup C Cp we 2 S D Wi Fi network setup AC power BS O R Oe Kose USB Port Wi Fi network status LED Sync Charge Play and firware update ethernet direct network connection o Master power is OFF e Green solid when connected to a Wi Fi network e Red blinking when NOT connected to a Wi Fi network REMOTE Toggle between standby and power ON mode AirPlay Wireless mode Local iPod Audio mode Volume and music controls Volume mute iPod shuffle amp repeat music playback controls SFX button turn SRS TruBass DSP audio a enhancement on off b
12. W2 will scan for firmware file local to the USB device If a valid firmware file is found iW2 firmware will update If no valid firmware is found reset the iW2 reload the proper file on USB stick and attempt firmware update again Note You will need to reconnect the iW2 speaker to your home network after a firmware update During Firmware Update When firmware is being updated all top panel controls icons will light left to right indicating progress of the firmware update installation All buttons are inactive except for the firmware button If firmware update is successful a confirmation positive tone will sound 0 E S B lt p cy K lt Dal gt C pd installation 0 50 100 English Troubleshooting Quick tips for problems with network setup 1 Verify that your router is discoverable must broadcast itself and not require user to type in the exact name Verify that the firmware of your router is up to date 2 Must use WPA WPA2 security not WEP or WPA WPA2 enterprise Try moving the iW2 closer to your access point within 10 6 ft during network setup Sometimes multiple Wi Fi networks are create interference Try using our free and easy to use iHome Connect app available on the App Store Use the Safari browser Apple s software tends to work best with its own technology Refresh the iHome Setup webpage http 192 168 1 12 and selecting available networks a few times unti
13. Wi Fi network to which your Unplug amp reconnect the AC power cable from back of the iW2 speaker is connected iW2 speaker Press amp hold power button 3 seconds Repeat iW2 Network Setup process if necessary See Troubleshooting on page 13 16 for other tips English Music Connectivity Connecting to the iW2 speaker You can connect to your iHome iW2 speaker four different ways 1 Using AirPlay to stream wirelessly from iTunes on your Mac or PC iTunes can stream to multiple AirPlay speakers 2 Using AirPlay to stream wirelessly from your iPad iPhone and iPod touch iOS devices stream to only one AirPlay speaker at a time 3 Using the USB port on the rear panel with an iPod USB sync cable for audio and charging your iPad iPhone or iPod 4 Using an auxiliary audio device mp3 or CD player connected to the aux in port on the rear panel AirPlay amp iPod touch iPhone or iPad Using an iOS device 1 Connect your iOS device to the same Wi Fi network as iW2 Go to ig ge Settings gt Wi Fi on your iOS device 2 Tap on MU iPod Music app look for the Lad AirPlay button next to the iPod music transport controls 3 Tap on the a AirPlay icon and choose iW2 from the list of speakers If the iW2 speaker is not available restart your iOS device and verify that the iW2 is powered on and connected to the same network 4 Press play AirPlay amp iTunes Using a Mac or PC with iTunes 1 Connect your
14. ass Bass and treble adjustment _ _ default is 0 for both bass and treble EQ reset return eq setting to default NOTE Power control on remote cycles between ON and standby modes it will NOT turn the unit OFF or ON English Quick Start O Connect to power source Press 8 hold power button 6 Press Ob repeatedly to cycle between 3 seconds to power unit ON standby and ON d p Press amp hold 3 seconds to turn iW2 OFF outlet Note When the iW2 is OFF not in standby mode you must press amp hold to begin using your iW2 speaker Local iPod Audio Mode Connect iPad iPhone iPod using iPod USB 2 Press J for iPod mode Press 4 Pil gt gt buttons on the iW2 or sync cable iPod and aux in play in parallel iW2 remote in iPod mode to control your iPod music Press 4 4 buttons to adjust volume Note Use iPod mode for both iPod docking and Aux in audio playback Verify that your iW2 speaker is successfully 2 Press A for AirPlay wireless mode Launch iTunes or use your iPad iPhone connected to your Wi Fi network iPad touch Verify iW2 and AirPlay source device is on same Wi Fi network visit page 8 for connecting your iW2 speaker to your Wi Fi network
15. com support or call our customer service team to resolve any problems you may be experiencing If service is still required 1 Pack unit in a well padded heavy corrugated box 2 Enclose a photocopy of your sales receipt credit card statement or other proof of the date of purchase if within the warranty period 3 Enclose a check or money order payable to the order of SDI Technologies for the sum of 30 00 75 00 without proof of purchase 4 Send the unit prepaid and insured to the Factory Service Center listed below Consumer Repair Department SDI Technologies Inc 1330 Goodyear Dr El Paso TX 79936 6420 Questions Visit www ihomeaudio com support airplay Toll Free Customer Service 1 800 288 2792 SDI Technologies 2011 All rights Reserved Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthor ized persons ii cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players computers routers CD s or tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its return to the owner This warranty is valid only in the United States of America and does not extend to owners of the product other than to t
16. d doubleclick Administrative Tools gt Services gt Bonjour Service then click Start followed by OK on the pop up menu Within iTunes open Preferences Select the Devices tab and activate the option that says Allow iTunes control from remote speakers Try restarting iTunes or your iOS device Note The original iPhone iPhone 3G and iPod touch 1st gen do not support AirPlay Questions Visit www ihomeaudio com support airplay English Problems Solution I ve selected the iW2 speaker as my 1 Verify that the volume is not muted or set to 0 AirPlay audio source but do not hear 2 Verify that there is not another iTunes library or iOS device connected to the iW2 any music Speaker 3 Try restarting iTunes or your iOS device 4 Try restarting your iW2 by pressing and holding the power button for 3 seconds to turn the unit off Wait for 10 seconds then repeat to turn the unit back on 5 Upgrade the software on your AirPlay compatible device iTunes iPad iPhone or iPod touch Occasional breaking of AirPlay music Do one or all of the following streaming 1 Enable the Auto Channel Scan option if available on the Wi Fi router 2 Enable the Wireless Intelligent Stream Handling WISH option if available on the Wi Fi router Enable the Quality of Service QoS option if available on the Wi Fi router Move your iW2 speaker closer to your Wi Fi access point 5 Change networ
17. eferred Wi Fi network from the list of available and click Mac screen MW PC Screen Join Network TX N Fill alll O e Note Connecting to a network may take up to 120 seconds If network Q 30 S 0 30 S connection is unsuccessful reset the unit or disconnect your iOS device and reconnect and repeat the above steps GGO 4 P http 192 168 1 12 1 Verify that the Network Status LED is green to confirm if the iW2 is s successfully connected to a network 2 Disconnect from iHome Setup from your Wi Fi network sevice Name setting and connect your Mac PC to the same network you This name will be displayed when selecting your speaker from a list con nected the iW2 spea ker of available AirPlay devices Customize the gt iHome iW2 3 Keep reading to learn how to use the iW2 and control your iTunes name of your speaker and iOS audio content C 156 Success Network Setup Current Network Connect the iW2 speaker to the same network as your AirPlay source iTunes iPad iPhone or iPod touch Select your Wi Fi gt Available Networks B network from list Join Network C 30 120 status network setup s lt KALE Ne ge Sklet Connected Not Connected E Problem o Note To begin using AirPlay wireless streaming your AirPlay source E ET devices must be connected to the same
18. ening to your music The SRS TruBass function is on by default and can only be turned off or on with the IR remote by pressing the te SFX button The Front Status LED will flash Green when the SRS TruBass effect is turned OFF or ON via the remote EQ The iW2 has an EQ feature that is controlled via the remote that adjusts Bass and Treble TREBLE buttons Adjust treble levels between 5 and 5 Default is 0 BASS buttons Adjust bass levels between 5 and 5 Default is 0 Note The Front Status LED will flash Green 3 times when the eq reaches maximum or minimum and then return to last status settings RESET button remote Resets EQ adjustments to the following state Bass 0 Treble 0 Note When Reset button is pressed Top Panel LEDs will flash 2 times and then return to last status settings Firmware update iW2 Speaker Firmware Updates It may be necessary to update the firmware of your iW2 speaker to ensure the latest compatibility and optimal functionality The iW2 s firmware can be updated using a USB Mass Storage device containing a new firmware image downloaded by the user from www ihomeaudio com register for an iHome account on our website to receive emails about FW updates Using a USB Mass Storage device 1 Download the latest firmware from www ihomeaudio com airplay support to your computer 2 Load downloaded firmware to a USB mass storage device 3 Connect USB device 4 Press 8 Hold 5 sec 5 i
19. ety Guide Safety Instructions 1 Water and Moisture The unit should not be used near water For example near a bathtub washbow kitchen sink laundry tub swimming pool or in a wet basement 2 Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a built in installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings 3 Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 4 Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 5 Power Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket 6 Cleaning The unit should be cleaned only as recommended See the Maintenance section of this manual for cleaning instructions 7 Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the p
20. g the sleep button and the home button on a newer iPad iPhone or iPod will reset it Upgrade the software on your iPad iPhone or iPod to the latest version by connecting it to a computer with iTunes installed and checking through iTunes that your unit has the most recent software Update if needed Verify that the iW2 is compatible with your iPod or iPhone iPod touch 1st 2nd 3rd and 4th generation iPod nano 2nd 3rd 4th 5th and 6th generation iPhone 4 iPhone 3GS and iPhone 3G Sound crackles is distorted has a loud hum or buzzing Turn the iPod device or other source component s volume down Make sure that the iPod s device EQ setting is set to OFF Make sure that the USB sync cable is plugged all the way into your iPad iPhone or iPod and connected all the way to the iW2 s USB port Make sure that the audio cable is plugged all the way into the iW2 s Aux Input jack Replace the aux in cable or iPod sync cable Unplug the power supply and connect it to a different AC outlet Move unit away from potential sources of interference such as microwave ovens fluorescent lights etc Questions Visit www ihomeaudio com support airplay English FAQ s What is AirPlay AirPlay is a wireless audio and video platform designed by Apple to stream digital media over a home network Wi Fi or Ethernet AirPlay is built in to iTunes and the iPad iPhone and iPod touch running the latest s
21. he AirPlay device iHome iW2 XXXX in the settings menu do not use special characters or symbols Reset the iW2 Hardware and repeat network setup Unplug amp reconnect the AC power cable from the back of the iW2 speaker Press amp hold power button 3 seconds to turn the iW2 speaker on and wait 20 seconds for the unit to startup Repeat iW2 Wi Fi Network Setup process if necessary If the problem remains it is strongly recommended to use our free iHome Connect app for your iPod Touch iPhone iPad to do the first time Wi Fi setup as some PC settings may affect the Wi Fi network setup I ve successfully connected the iW2 to my home network but cannot select the iW2 speaker from iTunes or from my iOS device A The iW2 speaker must be on the same network as your AirPlay source Verify you have the latest version of iTunes and or iOS Disable the firewall software and security software which may block ports that AirPlay uses to stream content Try restarting iTunes or your iOS device Note The original iPhone iPhone 3G and iPod touch 1st gen do not support AirPlay No AirPlay icon in iTunes or on my iPad iPhone iPod touch Make sure that the device has already joined the AirPlay network Before you open iTunes make sure that you have enabled Bonjour service in your PC Take Windows XP for example to enable the service you can click Start gt Settings gt Control Panel an
22. he original purchaser In no event will SDI Technologies or any of its affiliates contractors resellers their officers directors shareholders mem bers or agents be liable to you or any third party for any consequen tial or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from State to state Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractu ally binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI Technologies product Srse is a registered trademarks of SRS Labs Inc TruBass TruBass technology is incorporated under license from SRS Labs Inc SRS WOWS which features TruBass significantly improves the playback quality of audio delivering a dynamic 3D entertainment experience with deep rich bass and high frequency clarity for crisp detail English www ihomeaudio com
23. k security settings to WPA WPA2 Personal WEP is known to cause issue with AirPlay streaming and we do not recommend this legacy security format 6 Restart your iPod Touch iPhone iPad or iTunes or iW2 speaker 7 Browsing Internet content like news music video etc via your home Wi Fi network from other Wi Fi devices may affect the AirPlay performance In case of AirPlay break or disconnection it is recommended to stop or limit Internet surfing A WwW Problems using the iHome Connect Sometimes there is an authentication error with an iOS device common to any iOS app accessory that causes the device running the iHome Connect app to be unable to detect the iW2 The user may correctly connect the iW2 with the USB sync cable but the app will keep showing the message Please connect your iHome AirPlay compatible device with an iPod USB sync cable 1 Verify sync cable is connected to the rear USB port on the iW2 and securely connected to your iOS device iPad iPhone iPod touch 2 Restart iHome Connect app takes 10 sec Exit app and double tap home button Press amp hold iHome Connect app Close app and exit app manager Restart iHome Connect Restart iOS device takes 1 minute 4 Restart iW2 takes 30 seconds Unplug amp reconnect the AC power cable from back of the iW2 speaker Press amp hold power button 3 seconds to turn the iW2 speaker on and wait 20 seconds for the unit to startup Repeat iW2 Wi Fi Ne
24. l it shows up Make sure that the SSID name of your home router consists of normal characters or digits with no space or special characters like inserted Reset your router and start network setup over again 9 iW2 Reset Sometimes you simply need to reset the iW2 and start network setup over again Disconnect the AC cable wait for two minutes Reconnect the AC cable then press and hold power for 3 seconds Repeat iW2 Network Setup process if necessary NO UW DB UW CO want to find the iW2 s MAC address Some network configurations may require you to know the iW2 s MAC address Follow these steps to determine your iW2 s MAC address 1 Turn on iW2 press and hold network setup button for 4 seconds and wait for about 60 seconds From your computer connect to the network named iHome Setup 2 Ona Mac open the Terminal application On a PC click Start gt Run type cmd and click OK When the prompt appears type arp a and press Enter 4 You may get a long list of items in response Please find the line that reads similar to inome iW2 e52431 local 192 168 1 12 at c8 d5 fe e5 24 31 on en1 ethernet where the six hexadecimal pairs c8 d5 fe e5 24 31 in this example represent the MAC address for your iW2 5 You can use this MAC address in your network s setup to allow the iW2 on your network UJ Network setup when using a hidden SSID Setting up iW2 requires you to unhide your SSID Don t wor
25. nnel S S O gt is a registered trademark of SRS Labs Inc TruBass technology TruBass is incorporated under license from SRS Labs Inc SRS WOW which features TruBass significantly improves the playback quality of audio delivering a dynamic 3D entertainment experience with deep rich bass and high frequency clarity for crisp detail English FCC Radiation Exposure Statement FCC ID EMOiW2 IC 986B iW2 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This transmitter must not be co located or operating in conjunction with any other antenna or transmitter This Device complies with RSS 210 of the IC Rules Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference received including interference that may cause undesired operation This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC15 19 Le present appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L exploitation est autoris e aux deux conditions suivantes 1
26. nsure that you are able to enjoy the latest AirPlay enhancements and compatibility Download the ld iHome Connect app for iPod touch iPhone and iPad Have your Wi Fi network name SSID and password if applicable available for reference Verify that your Wi Fi network and router is discoverable If you use security for your network use WPA WPA2 security not WEP or WPA WPA2 enterprise If you use Ethernet please enable your router DHCP function VAAN N Connecting directly via Ethernet to you home network The iW2 has a dedicated Ethernet port that allows you to connect directly to your access point or home network without using Wi Fi ED Ethernet cable not included To setup your iW2 speaker via Ethernet 1 Disconnect AC power cable disconnecting 2 Connect ethernet cable to the iW2 and to access point router or network 3 Connect AC power cable and power ON iW2 Renaming your speaker To rename your iW2 speaker when using a direct Ethernet connec tion you must use either our iHome Connect app or put the iW2 speaker into iHome Setup mode Please refer to pages 9 amp 10 to discover how to change the name of your iW2 speaker directly connect to router or wall Note Unplug ethernet cable and re boot iW2 first if you want to ethernet port switch to Wi Fi connection reconnecting Success ee 1 Verify tha
27. oftware For AirPlay enabled speakers this means 1 Consumers can stream their iTunes music to our iW2 AirPlay enabled speaker their Apple TV or other AirPlay enabled speakers 2 iPad iPhone iPod touch owners can stream their iPod music AND audio content from other music apps like Pandora and iHeartRadio to our iW2 AirPlay enabled speaker their Apple TV or other AirPlay enabled speakers 3 iTunes is unique because a user can stream whatever is playing in iTunes to multiple speakers around the house 4 iOS devices iPad iPhone iPod touch can only stream to one AirPlay enabled device at a time What other equipment do require to use iW2 with AirPlay Using the iHome iW2 with AirPlay requires a Mac or PC running iTunes 10 1 or later or an Apple iOS device running iOS 4 2 or later connected to the same network Typically a network will consist of a Wi Fi router or hub What devices are compatible with AirPlay AirPlay works with iPod touch 2nd 3rd and 4th generation iPhone 4 iPhone 3GS iPad 2 iPad with iOS 4 2 and iTunes 10 1 Mac or PC or later What Apple devices are compatible with iW2 s USB connector iW2 supports USB docking for iPhone and iPod for audio and charging with included USB sync cable The USB connector works with iPod touch 1st 2nd 3rd and 4th generation iPod nano 2nd 3rd 4th 5th and 6th generation iPhone 4 iPhone 3GS iPhone 3G iPad 2 and iPad Can stream audio wirelessly to the iW2 with
28. out a network connection No the iW2 and AirPlay audio source must be connected to the same Wi Fi network via a router or hub Can stream video wirelessly to iW2 No only audio streaming is supported Does the iW2 have an AUX input for my TV or other audio device Yes the iW2 can be used as a speaker system with many products that have headphone stereo RCA or optical audio outputs cable not included How many iHome iW2 units can stream to at once This will depend on your network equipment capabilities and set up For Mac PC with iTunes with a high performance network up to three iHome iW2 s may be used An iPad iPhone or iPod touch can only stream to a single iW2 speaker What Wi Fi technologies does iW2 support The iW2 is Wi Fi certified to work with networks that use the 802 11b g wireless standards What network security types does the iW2 support The iW2 supports the following security types Open WPA Personal PSK WPA2 Personal PSK iHome does not recommend using iW2 on security networks configured with WEP security due to inconsistencies in compatibility with that aging security standard The iW2 does not support WPA WPA2 Enterprise security types For instructions on changing security types of your home network refer to your Wi Fi access point s documentation For best results ensure your Wi Fi access point is WiFi certified and is configured to support 802 11g communications English Consumer Product Saf
29. roduct 8 Attachments Do not use attachments not recommended by the product manufacturer 9 Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and power line surges 10 Overloading Do not overload wall sockets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 11 Damage Requiring Service The unit should be serviced by qualified service personnel when A the power supply cable or plug has been damaged B objects have fallen into or liquid has been spilled into the enclosure C the unit has been exposed to rain D the unit has been dropped or the enclosure damaged E the unit exhibits a marked change in performance or does not operate normally 12 Antenna Do not connect an external antenna to the unit other than that provided 13 Periods of None Use If the unit is to be left unused for an extended period of time such as a month or longer the power cable should be unplugged from the unit to prevent damage or corrosion 14 Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service perso
30. ry this is only temporary You can use your router s settings to change your security settings to un hide your network s SSID After doing so the iW2 will be able to detect select and join your network Once the network setup is completed you can re hide your network s SSID The iW2 will remain connected to your network after hiding your SSID Questions Visit www ihomeaudio com support airplay English AirPlay amp Network Setup Problems Solution am unable to connect the iW2 to my home Wi Fi network 1 2 Verify that your Wi Fi network is functioning and Wi Fi certified This device is only compatible with Wi Fi certified routers Move the iW2 closer to your network access point the Wi Fi signal is weak or there are overlapping Wi Fi signals or the iW2 is out of range of your Wi Fi network Enable SSID broadcast un hide network on the Wi Fi router Once you have success fully connected the iW2 speaker to your Wi Fi network you can then re hide the network Use a WPA or WPA2 Personal key for security We do not recommend the use of any WEP key for security and WPA WPA2 enterprise is not compatible with AirPlay Keep away from potential sources of interference which may affect Wi Fi signal such as microwave ovens Make sure that the SSID name of your home router consists of normal characters or digits with no space or special characters like inserted If you choose to rename t
31. t the Network Status LED is green to confirm if the iW2 is successfully connected to a network 2 Keep reading to learn how to use the iW2 and to control your iTunes and iOS audio content press amp hold 0 power button 3 seconds to power ON iW2 g elile Connected Not Connected Note To begin using AirPlay wireless streaming your AirPlay source devices must be connected to the same Wi Fi network to which your iW2 speaker is connected English 8 Wi Fi Network Setup Option A Connecting with your iPod touch iPhone or iPad Recommended If you have an iPod touch iPhone or iPad with iOS 4 0 or later we recommend that you use our free iHome Connect app for the quickest GD Wi Fi network setup experience To connect your iW2 speaker to a Wi Fi network using an iOS device follow these steps 1 Connect AC power and power ON iW2 speaker 1 Connect your iOS device to the iW2 using the included iPod USB sync cable press 8 hold C power button 3 seconds to power ON iW2 2 Download our free iHome Connect app from the ej App Store and launch the app 2
32. twork Setup process if necessary ii Note iHome Connect only works when docked with iHome AirPlay products and requires iOS 4 0 to work Questions Visit www ihomeaudio com support airplay English General Problems Solution The iW2 doesn t respond or doesn t turn ON 1 Verify that the adaptor is connected and the power outlet is always live not controlled by a wall switch Reset the iW2 Hardware Unplug 8 reconnect the AC power cable from back of the iW2 speaker Press amp hold power button 3 seconds to turn the iW2 speaker on and wait 20 seconds for the unit to startup No sound Verify that the volume is not muted or set to 0 Verify the mode AirPlay Wireless or iPod mode Verify iPod or iPhone is properly connected with the USB sync cable and connected to the iW2 s USB port Verify that there is not another iTunes library or iOS device connected to the iW2 speaker Check the network connection Set up the network again if needed Try restarting iTunes or your iOS device iPad iPhone iPod doesn t charge or play audio in iPod mode iPad iPhone iPod is not docked properly Disconnect your iPad iPhone iPod from the USB sync cable and check for obstruction on the connectors in the USB sync cable on your iPad iPhone iPod or USB port on the iW2 Reset your iPhone iPod Please see the user manual or the Apple web site for details Typically holdin

Download Pdf Manuals

image

Related Search

Related Contents

MRN/12497 FFblueSpcSht.lyt  Sony Cyber-shot DSCT50B User's Manual  PRIME-DENT DUAL CURE COMPOSITE LUTING CEMENT  Melissa Green Energy 677-001 User's Manual  5 x TBE (PDF 200KB)  RADIO PORTÁTIL MULTIMEDIA  Title: Electroservices (Midlands) Ltd. – Client  

Copyright © All rights reserved.
Failed to retrieve file